Skip to contentSkip to conversation

Initial support for SolidRun LX2160A-CEX7

PATCH Superseded Vladimir Oltean 1 participant 8 messages Nov 2, 2024 – Nov 7, 2024

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Vladimir Oltean

author
#0 lore raw

cover Initial support for SolidRun LX2160A-CEX7

Hello,

This series aims to introduce basic initial support for the CX LX2 and HoneyComb LX2 boards by SolidRun (both of which are based on the LX2160A-CEX7 SoM):
https://shop.solid-run.com/product/SRLX216S00D00GE064C08CH/
https://shop.solid-run.com/product/SRLX216S00D00GE064H09CH/

Although I also work at NXP, I am submitting this in a personal capacity, and for personal use.

Patch 1/7 performs an uprev of existing NXP Layerscape BSP packages to the latest tag. This is necessary because packages such as the RCW do not permit versioning per board defconfig like Linux/U-Boot/ATF do, instead the version is global. I've tested the uprev on an LS1028A-RDB.

Patches 2-5/7 add extra packages which are critical for the operation of the NXP LX2160A SoC.

Patch 6/7 introduces the board files for the new platform. In my use case, Buildroot makes the firmware and recovery Linux rootfs for the main Debian operating system.

Note that the platform doesn't achieve everything that I wish just yet. For example, U-Boot doesn't boot properly from a USB stick with a Debian installer on it.

To launch the Debian installer, U-Boot attempts to push its own device tree to Linux (and that doesn't go very well, because they have partially incompatible formats). Thus, one would need to uprev the bootloader to the current upstream master branch, rather than continue developing on top of NXP Linux Factory tags, then sync the U-Boot device trees with Linux, and upstream that work.

For this reason, the entire effort should be considered WIP, though in itself, it is bootable and usable. I am submitting relatively early because the speed of development in Buildroot appears fast, and the existing work would go out of sync quickly. I intend to work with Josua Mayer for developing further U-Boot/ATF patches, and including them in Buildroot only once they are available through
https://github.com/SolidRun/lx2160a_build/, rather than Buildroot behaving as its own upstream of sorts.

Finally, patch 7/7 is a cleanup made as I noticed that board/freescale/common/patches has become a leftover since I started working on the LX2160ACEX7 support.

Vladimir Oltean (7):
platform/layerscape: bump Linux Factory tag to lf-6.6.36-2.1.0 package/qoriq-ddr-phy-binary: new package package/qoriq-mc-binary: new package package/qoriq-mc-utils: new package package/qoriq-restool: new package board/lx2160acex7: new platform
board/freescale: get rid of common patch folder

 DEVELOPERS                                    |    6 +
 ...Makefile-Suppress-array-bounds-error.patch |   51 -
 .../arm-trusted-firmware.hash                 |    2 +-
 .../ls1028ardb/patches/linux/linux.hash       |    2 +-
 .../ls1028ardb/patches/uboot/uboot.hash       |    2 +-
 board/freescale/ls1028ardb/readme.txt         |   15 +-
 .../arm-trusted-firmware.hash                 |    2 +-
 .../ls1046a-frwy/patches/linux/linux.hash     |    2 +-
 .../ls1046a-frwy/patches/uboot/uboot.hash     |    2 +-
 board/freescale/ls1046a-frwy/readme.txt       |   17 +-
 board/solidrun/lx2160acex7/extlinux.conf      |    4 +
 board/solidrun/lx2160acex7/genimage.cfg       |   54 +
 board/solidrun/lx2160acex7/linux.config       |    1 +
 .../0001-plat-nxp-lx2160a-auto-boot.patch     |  219 +
 ...ccount-MEM_PLL_CFG_SHIFT-for-ddr-fre.patch |   85 +
 ...sert-SUS_S5-GPIO-to-poweroff-the-COM.patch |   29 +
 ...assert-IRQ0-GPIO-to-poweroff-the-EVB.patch |   29 +
 ...ptional-S5-gpio-from-Makefile-consta.patch |   63 +
 ...te-platform-for-solidrun-cex7-module.patch |  418 ++
 ...flexible-value-for-CONFIG_DDR_NODIMM.patch |   33 +
 ...tform-for-solidrun-internal-cex6-eva.patch |  544 +++
 ...ort-flushing-i2c-bus-before-ddr-init.patch |  365 ++
 ...h-i2c-bus-with-spd-eeprom-before-ddr.patch |   30 +
 ...h-i2c-bus-with-spd-eeprom-before-ddr.patch |   30 +
 ...-building-without-NXP_NV_SW_MAINT_LA.patch |   49 +
 ...-boot-without-spi-flash-disable-non-.patch |   33 +
 ...te-platform-for-solidrun-lx2162a-som.patch |  597 +++
 ...d-support-for-new-binutils-versions.patch} |    0
 .../arm-trusted-firmware.hash                 |    2 +
 .../patches/linux-headers/linux-headers.hash  |    1 +
 .../lx2160acex7/patches/linux/linux.hash      |    2 +
 ...x2160-cex7-based-clearfog-cx-dpl-dpc.patch |  937 +++++
 ...160-cex6-based-evaluation-board-dpl-.patch | 1454 +++++++
 ...n-for-lx2162a-som-and-clearfog-board.patch | 3622 +++++++++++++++++
 ...som-clearfog-enable-dpni-connections.patch |  188 +
 ...rfog-cx-configure-qsfp-ports-type-ph.patch |   52 +
 ...n-solidrun-lx2160a-cex-7-on-clearfog.patch |  951 +++++
 ...-MEM_PLL_CFG-into-ddr-speed-specific.patch |  112 +
 ...separate-configurations-for-flexspi-.patch |  894 ++++
 ...me-sdhc1-config-to-generic-sdhc-for-.patch |  149 +
 ...c-jumpc-and-jump-to-pbi-instructions.patch |   55 +
 ...add-configuration-for-both-sdhc-xspi.patch |  836 ++++
 ...ootlocptr-reduce-size-of-pbi-section.patch |   90 +
 ...ge-2.2GHz-configuration-platform-clo.patch |  475 +++
 ...configuration-for-fraction-ddr-speed.patch |  421 ++
 ...n-solidrun-internal-lx2160a-cex6-eva.patch |  220 +
 ...le-A-050426-workaround-for-silicon-o.patch |   35 +
 ...le-pci-errata-workarounds-for-all-ac.patch |   87 +
 ...-configuration-for-2.2GHz-binned-soc.patch |   42 +
 .../0014-lx2162aqds-re-enable-dpmac11.patch   |   27 +
 ...n-for-lx2162a-som-and-clearfog-evalu.patch |  532 +++
 ...rfog-cx-add-configuration-for-serdes.patch | 2000 +++++++++
 ...d-solidrun-lx2160-cex7-board-support.patch | 1342 ++++++
 ...ait-100ms-for-Link-Up-in-ls_pcie_g4_.patch |   65 +
 ...t-100ms-for-Link-Up-in-ls_pcie_probe.patch |   64 +
 ...-calculation-of-ddr-clock-rate-to-in.patch |   63 +
 ...able-workaround-for-SPI-erratum-A-05.patch |  102 +
 ...x2160-cex7-enable-additional-drivers.patch |   96 +
 .../lx2160acex7/patches/uboot/uboot.hash      |    2 +
 board/solidrun/lx2160acex7/post-build.sh      |    8 +
 board/solidrun/lx2160acex7/readme.txt         |  112 +
 .../udev/rules.d/74-dpaa2-networking.rules    |   12 +
 .../lx2160acex7/u-boot-environment-sd.txt     |   96 +
 configs/ls1028ardb_defconfig                  |    6 +-
 configs/ls1046a-frwy_defconfig                |    6 +-
 configs/solidrun_lx2160acex7_defconfig        |   53 +
 package/Config.in                             |    4 +
 package/fmc/fmc.hash                          |    2 +-
 package/fmc/fmc.mk                            |    2 +-
 package/fmlib/fmlib.hash                      |    2 +-
 package/fmlib/fmlib.mk                        |    2 +-
 .../qoriq-cadence-dp-firmware.hash            |    2 +-
 .../qoriq-cadence-dp-firmware.mk              |   10 +-
 package/qoriq-ddr-phy-binary/Config.in        |    6 +
 .../qoriq-ddr-phy-binary.hash                 |    3 +
 .../qoriq-ddr-phy-binary.mk                   |   18 +
 package/qoriq-fm-ucode/qoriq-fm-ucode.hash    |    2 +-
 package/qoriq-fm-ucode/qoriq-fm-ucode.mk      |    2 +-
 package/qoriq-mc-binary/Config.in             |   48 +
 package/qoriq-mc-binary/qoriq-mc-binary.hash  |    3 +
 package/qoriq-mc-binary/qoriq-mc-binary.mk    |   22 +
 package/qoriq-mc-utils/Config.in              |   35 +
 package/qoriq-mc-utils/qoriq-mc-utils.hash    |    3 +
 package/qoriq-mc-utils/qoriq-mc-utils.mk      |   22 +
 package/qoriq-rcw/qoriq-rcw.hash              |    2 +-
 package/qoriq-rcw/qoriq-rcw.mk                |    2 +-
 package/qoriq-restool/Config.in               |   21 +
 package/qoriq-restool/qoriq-restool.hash      |    3 +
 package/qoriq-restool/qoriq-restool.mk        |   24 +
 89 files changed, 18044 insertions(+), 91 deletions(-)
 delete mode 100644 board/freescale/common/patches/arm-trusted-firmware/0002-LF-7968-01-fix-Makefile-Suppress-array-bounds-error.patch
 create mode 100644 board/solidrun/lx2160acex7/extlinux.conf
 create mode 100644 board/solidrun/lx2160acex7/genimage.cfg
 create mode 100644 board/solidrun/lx2160acex7/linux.config
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0001-plat-nxp-lx2160a-auto-boot.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0002-dcfg-Take-into-account-MEM_PLL_CFG_SHIFT-for-ddr-fre.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0003-lx2160acex7-assert-SUS_S5-GPIO-to-poweroff-the-COM.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0004-lx2160acex6-assert-IRQ0-GPIO-to-poweroff-the-EVB.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0005-lx2160a-assert-optional-S5-gpio-from-Makefile-consta.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0006-add-separate-platform-for-solidrun-cex7-module.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0007-lx2160a-support-flexible-value-for-CONFIG_DDR_NODIMM.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0008-add-separate-platform-for-solidrun-internal-cex6-eva.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0009-lx2160a-support-flushing-i2c-bus-before-ddr-init.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0010-lx2160acex6-flush-i2c-bus-with-spd-eeprom-before-ddr.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0011-lx2160acex7-flush-i2c-bus-with-spd-eeprom-before-ddr.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0012-plat-lx2160a-fix-building-without-NXP_NV_SW_MAINT_LA.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0013-plat-lx2160a-fix-boot-without-spi-flash-disable-non-.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0014-add-separate-platform-for-solidrun-lx2162a-som.patch
 rename board/{freescale/common/patches/arm-trusted-firmware/0001-feat-build-add-support-for-new-binutils-versions.patch => solidrun/lx2160acex7/patches/arm-trusted-firmware/0015-feat-build-add-support-for-new-binutils-versions.patch} (100%)
 create mode 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/arm-trusted-firmware.hash
 create mode 120000 board/solidrun/lx2160acex7/patches/linux-headers/linux-headers.hash
 create mode 100644 board/solidrun/lx2160acex7/patches/linux/linux.hash
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-mc-utils/0001-add-solidrun-lx2160-cex7-based-clearfog-cx-dpl-dpc.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-mc-utils/0002-add-solidrun-lx2160-cex6-based-evaluation-board-dpl-.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-mc-utils/0003-add-configuration-for-lx2162a-som-and-clearfog-board.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-mc-utils/0004-lx2162-som-clearfog-enable-dpni-connections.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-mc-utils/0005-lx2160acex7-clearfog-cx-configure-qsfp-ports-type-ph.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0001-add-configuration-solidrun-lx2160a-cex-7-on-clearfog.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0002-lx2160acex7-move-MEM_PLL_CFG-into-ddr-speed-specific.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0003-lx2160acex7-add-separate-configurations-for-flexspi-.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0004-lx2160acex7-rename-sdhc1-config-to-generic-sdhc-for-.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0005-add-loadc-jumpc-and-jump-to-pbi-instructions.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0006-lx2160acex7-add-configuration-for-both-sdhc-xspi.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0007-bootlocptr-reduce-size-of-pbi-section.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0008-lx2160acex7-change-2.2GHz-configuration-platform-clo.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0009-lx2160acex7-add-configuration-for-fraction-ddr-speed.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0010-add-configuration-solidrun-internal-lx2160a-cex6-eva.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0011-lx2160acex7-enable-A-050426-workaround-for-silicon-o.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0012-lx2160acex6-enable-pci-errata-workarounds-for-all-ac.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0013-lx2160acex6-add-configuration-for-2.2GHz-binned-soc.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0014-lx2162aqds-re-enable-dpmac11.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0015-add-configuration-for-lx2162a-som-and-clearfog-evalu.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/qoriq-rcw/0016-lx2160acex7-clearfog-cx-add-configuration-for-serdes.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/uboot/0001-add-solidrun-lx2160-cex7-board-support.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/uboot/0002-pci-ls_pcie_g4-Wait-100ms-for-Link-Up-in-ls_pcie_g4_.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/uboot/0003-pci-ls_pcie-Wait-100ms-for-Link-Up-in-ls_pcie_probe.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/uboot/0004-fsl-lsch3-update-calculation-of-ddr-clock-rate-to-in.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/uboot/0005-armv8-lx2160a-enable-workaround-for-SPI-erratum-A-05.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/uboot/0006-configs-lx2160-cex7-enable-additional-drivers.patch
 create mode 100644 board/solidrun/lx2160acex7/patches/uboot/uboot.hash
 create mode 100755 board/solidrun/lx2160acex7/post-build.sh
 create mode 100644 board/solidrun/lx2160acex7/readme.txt
 create mode 100644 board/solidrun/lx2160acex7/rootfs_overlay/etc/udev/rules.d/74-dpaa2-networking.rules
 create mode 100644 board/solidrun/lx2160acex7/u-boot-environment-sd.txt
 create mode 100644 configs/solidrun_lx2160acex7_defconfig
 create mode 100644 package/qoriq-ddr-phy-binary/Config.in
 create mode 100644 package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.hash
 create mode 100644 package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.mk
 create mode 100644 package/qoriq-mc-binary/Config.in
 create mode 100644 package/qoriq-mc-binary/qoriq-mc-binary.hash
 create mode 100644 package/qoriq-mc-binary/qoriq-mc-binary.mk
 create mode 100644 package/qoriq-mc-utils/Config.in
 create mode 100644 package/qoriq-mc-utils/qoriq-mc-utils.hash
 create mode 100644 package/qoriq-mc-utils/qoriq-mc-utils.mk
 create mode 100644 package/qoriq-restool/Config.in
 create mode 100644 package/qoriq-restool/qoriq-restool.hash
 create mode 100644 package/qoriq-restool/qoriq-restool.mk
Signature · 6 lines
2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#1 lore raw

PATCH 1/7 platform/layerscape: bump Linux Factory tag to lf-6.6.36-2.1.0

Update the following packages to the latest Linux Factory tag:

- qoriq-cadence-dp-firmware
- the updated download path was taken from the Yocto BSP at
https://github.com/nxp-qoriq/yocto-sdk.
- the recipe is here:
https://github.com/Freescale/meta-freescale/blob/master/recipes-bsp/dp-firmware-cadence/dp-firmware-cadence_22.04.bb

- arm-trusted-firmware
- linux
- u-boot
- fmc
- fmlib
- qoriq-rcw

Signed-off-by Vladimir Oltean <[email protected]>
---
 .../arm-trusted-firmware.hash                   |  2 +-
 .../ls1028ardb/patches/linux/linux.hash         |  2 +-
 .../ls1028ardb/patches/uboot/uboot.hash         |  2 +-
 board/freescale/ls1028ardb/readme.txt           | 15 ++++++++-------
 .../arm-trusted-firmware.hash                   |  2 +-
 .../ls1046a-frwy/patches/linux/linux.hash       |  2 +-
 .../ls1046a-frwy/patches/uboot/uboot.hash       |  2 +-
 board/freescale/ls1046a-frwy/readme.txt         | 17 ++++++++++-------
 configs/ls1028ardb_defconfig                    |  6 +++---
 configs/ls1046a-frwy_defconfig                  |  6 +++---
 package/fmc/fmc.hash                            |  2 +-
 package/fmc/fmc.mk                              |  2 +-
 package/fmlib/fmlib.hash                        |  2 +-
 package/fmlib/fmlib.mk                          |  2 +-
 .../qoriq-cadence-dp-firmware.hash              |  2 +-
 .../qoriq-cadence-dp-firmware.mk                | 10 +++++-----
 package/qoriq-fm-ucode/qoriq-fm-ucode.hash      |  2 +-
 package/qoriq-fm-ucode/qoriq-fm-ucode.mk        |  2 +-
 package/qoriq-rcw/qoriq-rcw.hash                |  2 +-
 package/qoriq-rcw/qoriq-rcw.mk                  |  2 +-
 20 files changed, 44 insertions(+), 40 deletions(-)
board/freescale/ls1028ardb/patches/arm-trusted-firmware/arm-trusted-firmware.hash +1 -1
index f9af28ab3cf5..942dab47072c 100644
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4f4dc78bfb5b7391a65ae0f83856661071f666ac2bf6a9380fddbe376a8bdaaa  atf-lf-6.6.23-2.0.0.tar.gz
+sha256  4562efdc08efae7d36f3ee481871aac8ed0c856f8023d2186e4affdc5b768270  atf-lf-6.6.36-2.1.0.tar.gz
board/freescale/ls1028ardb/patches/linux/linux.hash +1 -1
index e038c2286237..bfdc2c268d2d 100644
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  6d592722e004516309f8ce33e654f1322e4d1f0f33567acb86ca19229176fd9e  linux-lf-6.6.23-2.0.0.tar.gz
+sha256  26e0db3dda786d939269f85df0f605e28cb55646ab8c541fc9bbbb4ab7fd9bf3  linux-lf-6.6.36-2.1.0.tar.gz
board/freescale/ls1028ardb/patches/uboot/uboot.hash +1 -1
index a5ccd82b2b0d..b1d83aa9135e 100644
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  a2bcd7a34d4908ffbadfea731d0f0fd20f19a31cff6ff6310980e7f6743ceb24  u-boot-lf-6.6.23-2.0.0.tar.gz
+sha256  51adf233d53af875f70cf451e5950dd0b6af09ff35e546eacc4ec6998454c7eb  u-boot-lf-6.6.36-2.1.0.tar.gz
board/freescale/ls1028ardb/readme.txt +8 -7
index 6633d60b9013..e6beab44ca9d 100644
@@ -8,15 +8,16 @@ for more details about the board and the QorIQ Layerscape SoC, see the following
   - https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1028a-reference-design-board:LS1028ARDB
   - https://www.nxp.com/LS1028A
 
-for the software NXP LSDK (Layerscape Software Development Kit), see
-  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf
+for the software Layerscape Linux Distribution PoC (LLDP), the latest public
+user guide lags several revisions behind:
+  - https://docs.nxp.com/bundle/LLDPUG_L6.1.36_2.1.0/page/topics/about_this_document.html
 
 the components from NXP are:
-  - rcw, lf-6.6.23-2.0.0
-  - atf (fork), lf-6.6.23-2.0.0
-  - uboot (fork), lf-6.6.23-2.0.0
-  - cadence-dp-firmware (blob), LSDK 20.12
-  - linux (fork), lf-6.6.23-2.0.0
+  - rcw, lf-6.6.36-2.1.0
+  - atf (fork), lf-6.6.36-2.1.0
+  - uboot (fork), lf-6.6.36-2.1.0
+  - cadence-dp-firmware (blob), lf-6.6.36-2.1.0
+  - linux (fork), lf-6.6.36-2.1.0
 
 Build
 =====
board/freescale/ls1046a-frwy/patches/arm-trusted-firmware/arm-trusted-firmware.hash +1 -1
index f9af28ab3cf5..942dab47072c 100644
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4f4dc78bfb5b7391a65ae0f83856661071f666ac2bf6a9380fddbe376a8bdaaa  atf-lf-6.6.23-2.0.0.tar.gz
+sha256  4562efdc08efae7d36f3ee481871aac8ed0c856f8023d2186e4affdc5b768270  atf-lf-6.6.36-2.1.0.tar.gz
board/freescale/ls1046a-frwy/patches/linux/linux.hash +1 -1
index e038c2286237..bfdc2c268d2d 100644
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  6d592722e004516309f8ce33e654f1322e4d1f0f33567acb86ca19229176fd9e  linux-lf-6.6.23-2.0.0.tar.gz
+sha256  26e0db3dda786d939269f85df0f605e28cb55646ab8c541fc9bbbb4ab7fd9bf3  linux-lf-6.6.36-2.1.0.tar.gz
board/freescale/ls1046a-frwy/patches/uboot/uboot.hash +1 -1
index a5ccd82b2b0d..b1d83aa9135e 100644
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  a2bcd7a34d4908ffbadfea731d0f0fd20f19a31cff6ff6310980e7f6743ceb24  u-boot-lf-6.6.23-2.0.0.tar.gz
+sha256  51adf233d53af875f70cf451e5950dd0b6af09ff35e546eacc4ec6998454c7eb  u-boot-lf-6.6.36-2.1.0.tar.gz
board/freescale/ls1046a-frwy/readme.txt +10 -7
index 4d1e0e1dcd9c..3e7390daa6be 100644
@@ -9,15 +9,18 @@ for more details about the board and the QorIQ Layerscape SoC, see the following
   - https://www.nxp.com/FRWY-LS1046A
   - https://www.nxp.com/docs/en/quick-reference-guide/FRWY-LS1046AGSG.pdf
 
-for the software NXP LSDK (Layerscape Software Development Kit), see
-  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf
+for the software Layerscape Linux Distribution PoC (LLDP), the latest public
+user guide lags several revisions behind:
+  - https://docs.nxp.com/bundle/LLDPUG_L6.1.36_2.1.0/page/topics/about_this_document.html
 
 the components from NXP are:
-  - rcw, lf-6.6.23-2.0.0
-  - atf (fork), lf-6.6.23-2.0.0
-  - uboot (fork), lf-6.6.23-2.0.0
-  - qoriq-fm-ucode (blob), lf-6.6.23-2.0.0
-  - linux (fork), lf-6.6.23-2.0.0
+  - rcw, lf-6.6.36-2.1.0
+  - atf (fork), lf-6.6.36-2.1.0
+  - uboot (fork), lf-6.6.36-2.1.0
+  - qoriq-fm-ucode (blob), lf-6.6.36-2.1.0
+  - linux (fork), lf-6.6.36-2.1.0
+  - fmlib, lf-6.6.36-2.1.0
+  - fmc, lf-6.6.36-2.1.0
 
 Build
 =====
configs/ls1028ardb_defconfig +3 -3
index 0d1843bf5fce..e73e9a954584 100644
@@ -12,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1028ardb/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.6.23-2.0.0)/linux-lf-6.6.23-2.0.0.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.6.36-2.1.0)/linux-lf-6.6.36-2.1.0.tar.gz"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

@@ -25,7 +25,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.6.23-2.0.0)/atf-lf-6.6.23-2.0.0.tar.gz"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.6.36-2.1.0)/atf-lf-6.6.36-2.1.0.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y

@@ -35,7 +35,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.6.23-2.0.0)/u-boot-lf-6.6.23-2.0.0.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.6.36-2.1.0)/u-boot-lf-6.6.36-2.1.0.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1028ardb_tfa"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_PACKAGE_HOST_GENIMAGE=y
configs/ls1046a-frwy_defconfig +3 -3
index 2cf0f9c8bc50..7b86d6ba9810 100644
@@ -12,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1046a-frwy/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.6.23-2.0.0)/linux-lf-6.6.23-2.0.0.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.6.36-2.1.0)/linux-lf-6.6.36-2.1.0.tar.gz"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

@@ -25,7 +25,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.6.23-2.0.0)/atf-lf-6.6.23-2.0.0.tar.gz"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.6.36-2.1.0)/atf-lf-6.6.36-2.1.0.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1046afrwy"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y

@@ -35,7 +35,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.6.23-2.0.0)/u-boot-lf-6.6.23-2.0.0.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.6.36-2.1.0)/u-boot-lf-6.6.36-2.1.0.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1046afrwy_tfa"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_PACKAGE_HOST_GENIMAGE=y
package/fmc/fmc.hash +1 -1
index 961ce18ac713..a467e99af842 100644
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256  a58514816108a16d07307f924ebceb67c7d61709e4449978763fc44ed6e1fc44  fmc-LSDK-21.08.tar.gz
+sha256  a58514816108a16d07307f924ebceb67c7d61709e4449978763fc44ed6e1fc44  fmc-lf-6.6.36-2.1.0.tar.gz
 sha256  f92862ceb95db5492f50a59d7c799c9395b714db88db92d11891dc0233e2ac42  COPYING
package/fmc/fmc.mk +1 -1
index 4f25545ffd8c..1135b46fe042 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FMC_VERSION = LSDK-21.08
+FMC_VERSION = lf-6.6.36-2.1.0
 FMC_SITE = $(call github,nxp-qoriq,fmc,$(FMC_VERSION))
 FMC_LICENSE = MIT
 FMC_LICENSE_FILES = COPYING
package/fmlib/fmlib.hash +1 -1
index f81b017869c3..034c44c5e10e 100644
@@ -1,3 +1,3 @@
 # Locally computed
-sha256  64dc76c0adc3aa58bce6aba470dee7dee001d4964ccb1958e899a59d9917b21d  fmlib-LSDK-21.08.tar.gz
+sha256  64dc76c0adc3aa58bce6aba470dee7dee001d4964ccb1958e899a59d9917b21d  fmlib-lf-6.6.36-2.1.0.tar.gz
 sha256  5d7770fa9f70f0c6f0b4784bbca8401811259a4b1e03455dbd863ffd0d34d2ca  COPYING
package/fmlib/fmlib.mk +1 -1
index 3d185979d51e..2682d0683cc8 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FMLIB_VERSION = LSDK-21.08
+FMLIB_VERSION = lf-6.6.36-2.1.0
 FMLIB_SITE = $(call github,nxp-qoriq,fmlib,$(FMLIB_VERSION))
 FMLIB_LICENSE = BSD-3-Clause
 FMLIB_LICENSE_FILES = COPYING
package/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.hash +1 -1
index 6e5c761463d9..eb6579b919c9 100644
@@ -1,5 +1,5 @@
 # Locally calculated
-sha256  e267655a47fbe118f6960bca7994bd6b8986ef955344fe006a424be96f868602  firmware-cadence-lsdk2012.bin
+sha256  65f829a9e2597bffc58a680aaefa638122144a083633d1ae09b3aec1d9f8ab84  firmware-imx-8.16.bin
 sha256  9c16421e7c702f56756650b8ac954d34556327e598a8666e6e8f4eb3a1aa95f1  COPYING
 sha256  72edc2072c86d93aa1993d15d4d19d96270af3749b0108995ad50c81d1461f52  EULA
 sha256  53e3eb0b2bd81c171fa04c17514e20b39b7bb1fe1224c593f7717f615fb9d52b  EULA.txt
package/qoriq-cadence-dp-firmware/qoriq-cadence-dp-firmware.mk +5 -5
index 4f75287269a3..04e3a2a6d9ee 100644
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-QORIQ_CADENCE_DP_FIRMWARE_VERSION = lsdk2012
-QORIQ_CADENCE_DP_FIRMWARE_SITE = http://www.nxp.com/lgfiles/sdk/$(QORIQ_CADENCE_DP_FIRMWARE_VERSION)
-QORIQ_CADENCE_DP_FIRMWARE_SOURCE = firmware-cadence-$(QORIQ_CADENCE_DP_FIRMWARE_VERSION).bin
+QORIQ_CADENCE_DP_FIRMWARE_VERSION = 8.16
+QORIQ_CADENCE_DP_FIRMWARE_SITE = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
+QORIQ_CADENCE_DP_FIRMWARE_SOURCE = firmware-imx-$(QORIQ_CADENCE_DP_FIRMWARE_VERSION).bin
 QORIQ_CADENCE_DP_FIRMWARE_LICENSE = NXP Semiconductor Software License Agreement
 QORIQ_CADENCE_DP_FIRMWARE_LICENSE_FILES = COPYING EULA EULA.txt
 QORIQ_CADENCE_DP_FIRMWARE_REDISTRIBUTE = NO

@@ -20,11 +20,11 @@ define QORIQ_CADENCE_DP_FIRMWARE_EXTRACT_CMDS
 endef
 
 define QORIQ_CADENCE_DP_FIRMWARE_INSTALL_TARGET_CMDS
-	$(INSTALL) -D -m 0644 $(@D)/dp/ls1028a-dp-fw.bin $(TARGET_DIR)/boot/ls1028a-dp-fw.bin
+	$(INSTALL) -D -m 0644 $(@D)/firmware/hdmi/cadence/dp_ls1028a.bin $(TARGET_DIR)/boot/ls1028a-dp-fw.bin
 endef
 
 define QORIQ_CADENCE_DP_FIRMWARE_INSTALL_IMAGES_CMDS
-	$(INSTALL) -D -m 0644 $(@D)/dp/ls1028a-dp-fw.bin $(BINARIES_DIR)/ls1028a-dp-fw.bin
+	$(INSTALL) -D -m 0644 $(@D)/firmware/hdmi/cadence/dp_ls1028a.bin $(BINARIES_DIR)/ls1028a-dp-fw.bin
 endef
 
 $(eval $(generic-package))
package/qoriq-fm-ucode/qoriq-fm-ucode.hash +1 -1
index 67efd675cc26..ba284664ab25 100644
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256  c994367c74dd2ff6cd70ea269cf1bc775c5f4e11294a8db414491ce6c2eb9dc3  qoriq-fm-ucode-lf-6.6.23-2.0.0.tar.gz
+sha256  2c6b69c34cf689178f8ee7db312c1bfd0e5e4d12dfe1e7f097ab35212f7776b0  qoriq-fm-ucode-lf-6.6.36-2.1.0.tar.gz
 sha256  7a223031d76339df0e4e5a94d193a270fb9963d42b577aa42fe130a4657f3e17  LICENSE
package/qoriq-fm-ucode/qoriq-fm-ucode.mk +1 -1
index 84360533eb1d..1718b1566730 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-QORIQ_FM_UCODE_VERSION = lf-6.6.23-2.0.0
+QORIQ_FM_UCODE_VERSION = lf-6.6.36-2.1.0
 QORIQ_FM_UCODE_SITE = $(call github,nxp-qoriq,qoriq-fm-ucode,$(QORIQ_FM_UCODE_VERSION))
 QORIQ_FM_UCODE_LICENSE = NXP Binary EULA
 QORIQ_FM_UCODE_LICENSE_FILES = LICENSE
package/qoriq-rcw/qoriq-rcw.hash +1 -1
index 1f664842f5ea..876733c39a19 100644
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256  52dfb95a3d8e811609dd8a982a5c6f3ba88fac096ea8448a27b571b7c25e3a83  qoriq-rcw-lf-6.6.23-2.0.0.tar.gz
+sha256  ed952fa73b290cff67603aeb6a37970d69ea56b66656f002f531912782416a35  qoriq-rcw-lf-6.6.36-2.1.0.tar.gz
 sha256  68f4b15ecc085729419bc60ca6eeadca5af0237bbfec791e8a79da9c943d42e9  LICENSE
package/qoriq-rcw/qoriq-rcw.mk +1 -1
index c6cfe59a5629..1acf5758a0ab 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-QORIQ_RCW_VERSION = lf-6.6.23-2.0.0
+QORIQ_RCW_VERSION = lf-6.6.36-2.1.0
 QORIQ_RCW_SITE = $(call github,nxp-qoriq,rcw,$(QORIQ_RCW_VERSION))
 QORIQ_RCW_LICENSE = BSD-3-Clause
 QORIQ_RCW_LICENSE_FILES = LICENSE
Signature · 6 lines
2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#2 lore raw

Re: [Buildroot] [PATCH 1/7] platform/layerscape: bump Linux Factory tag to lf-6.6.36-2.1.0

board/freescale/ls1046a-frwy/readme.txt for more details about the board and the QorIQ Layerscape SoC, see the following · line 14

Quoted 13 lines · Vladimir Oltean
board/freescale/ls1046a-frwy/readme.txt +3 -2
index 4d1e0e1dcd9c..3e7390daa6be 100644
@@ -9,15 +9,18 @@ for more details about the board and the QorIQ Layerscape SoC, see the following
   - https://www.nxp.com/FRWY-LS1046A
   - https://www.nxp.com/docs/en/quick-reference-guide/FRWY-LS1046AGSG.pdf
 
-for the software NXP LSDK (Layerscape Software Development Kit), see
-  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf
+for the software Layerscape Linux Distribution PoC (LLDP), the latest public
+user guide lags several revisions behind:
+  - https://docs.nxp.com/bundle/LLDPUG_L6.1.36_2.1.0/page/topics/about_this_document.html

Actually, I've found newer documentation, this will need updating.
https://docs.nxp.com/bundle/UG10143/page/topics/about_this_document.html
https://www.nxp.com/docs/en/user-guide/UG10143.pdf

I've noticed patch 6/7 "board/lx2160acex7: new platform" didn't reach the mailing lists. I got a message it was moderated by the email server due to its large size. Is there something actionable for me?
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

author
#3 lore raw

PATCH 2/7 package/qoriq-ddr-phy-binary: new package

In reply to Vladimir Oltean

The DDR PHY on the NXP LX2160A SoC needs firmware. This is distributed as prebuilt binaries by NXP through GitHub.

Signed-off-by Vladimir Oltean <[email protected]>
---
 DEVELOPERS                                     |  3 +++
 package/Config.in                              |  1 +
 package/qoriq-ddr-phy-binary/Config.in         |  6 ++++++
 .../qoriq-ddr-phy-binary.hash                  |  3 +++
 .../qoriq-ddr-phy-binary.mk                    | 18 ++++++++++++++++++
 5 files changed, 31 insertions(+)
 create mode 100644 package/qoriq-ddr-phy-binary/Config.in
 create mode 100644 package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.hash
 create mode 100644 package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.mk
DEVELOPERS +3 -0
index 327b2e64db71..ffe2d053efd0 100644
@@ -3305,6 +3305,9 @@ N:	Vivien Didelot <[email protected]>
 F:	board/technologic/ts5500/
 F:	configs/ts5500_defconfig
 
+N:	Vladimir Oltean <[email protected]>
+F:	package/qoriq-ddr-phy-binary/
+
 N:	Volkov Viacheslav <[email protected]>
 F:	package/v4l2grab/
 F:	package/zbar/
package/Config.in +1 -0
index 876b340a8a67..a23d12c40247 100644
@@ -454,6 +454,7 @@ menu "Firmware"
 	source "package/murata-cyw-fw/Config.in"
 	source "package/odroidc2-firmware/Config.in"
 	source "package/qcom-db410c-firmware/Config.in"
+	source "package/qoriq-ddr-phy-binary/Config.in"
 	source "package/qoriq-fm-ucode/Config.in"
 	source "package/rcw-smarc-sal28/Config.in"
 	source "package/rpi-firmware/Config.in"
package/qoriq-ddr-phy-binary/Config.in new file +6 -0
new file mode 100644
index 000000000000..301a2c197421
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_QORIQ_DDR_PHY_BINARY
+	bool "qoriq-ddr-phy-binary"
+	help
+	  Firmware binary for DDR PHY of NXP LX2160A family of SoCs.
+
+	  https://github.com/nxp-qoriq/ddr-phy-binary
package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.hash new file +3 -0
new file mode 100644
index 000000000000..7357e741fcfa
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256  b49cb34f941f7e534ec31d3d14d18d4e565e4875b690ecb0d7e2992b72c64dc7  qoriq-ddr-phy-binary-lf-6.6.36-2.1.0.tar.gz
+sha256  7a223031d76339df0e4e5a94d193a270fb9963d42b577aa42fe130a4657f3e17  NXP-Binary-EULA.txt
package/qoriq-ddr-phy-binary/qoriq-ddr-phy-binary.mk new file +18 -0
new file mode 100644
index 000000000000..ab25ff541d9c
@@ -0,0 +1,18 @@
+################################################################################
+#
+# qoriq-ddr-phy-binary
+#
+################################################################################
+
+QORIQ_DDR_PHY_BINARY_VERSION = lf-6.6.36-2.1.0
+QORIQ_DDR_PHY_BINARY_SITE = $(call github,nxp-qoriq,ddr-phy-binary,$(QORIQ_DDR_PHY_BINARY_VERSION))
+QORIQ_DDR_PHY_BINARY_LICENSE = NXP Binary EULA
+QORIQ_DDR_PHY_BINARY_LICENSE_FILES = NXP-Binary-EULA.txt
+QORIQ_DDR_PHY_BINARY_INSTALL_IMAGES = YES
+QORIQ_DDR_PHY_BINARY_INSTALL_TARGET = NO
+
+define QORIQ_DDR_PHY_BINARY_INSTALL_IMAGES_CMDS
+	$(INSTALL) -D $(@D)/lx2160a/fip_ddr.bin $(BINARIES_DIR)/fip_ddr.bin
+endef
+
+$(eval $(generic-package))
Signature · 6 lines
2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#4 lore raw

PATCH 3/7 package/qoriq-mc-binary: new package

In reply to Vladimir Oltean

Add a package which deploys the NXP MC (Management Complex) firmware to the target. This is necessary for NXP DPAA2 SoCs (LS1088A, LS2080A, LS2088A, LX2160A).

Signed-off-by Vladimir Oltean <[email protected]>
---
 DEVELOPERS                                   |  1 +
 package/Config.in                            |  1 +
 package/qoriq-mc-binary/Config.in            | 48 ++++++++++++++++++++
 package/qoriq-mc-binary/qoriq-mc-binary.hash |  3 ++
 package/qoriq-mc-binary/qoriq-mc-binary.mk   | 22 +++++++++
 5 files changed, 75 insertions(+)
 create mode 100644 package/qoriq-mc-binary/Config.in
 create mode 100644 package/qoriq-mc-binary/qoriq-mc-binary.hash
 create mode 100644 package/qoriq-mc-binary/qoriq-mc-binary.mk
DEVELOPERS +1 -0
index ffe2d053efd0..adfdd97a044a 100644
@@ -3307,6 +3307,7 @@ F:	configs/ts5500_defconfig
 
 N:	Vladimir Oltean <[email protected]>
 F:	package/qoriq-ddr-phy-binary/
+F:	package/qoriq-mc-binary/
 
 N:	Volkov Viacheslav <[email protected]>
 F:	package/v4l2grab/
package/Config.in +1 -0
index a23d12c40247..92f2f43a0bb1 100644
@@ -456,6 +456,7 @@ menu "Firmware"
 	source "package/qcom-db410c-firmware/Config.in"
 	source "package/qoriq-ddr-phy-binary/Config.in"
 	source "package/qoriq-fm-ucode/Config.in"
+	source "package/qoriq-mc-binary/Config.in"
 	source "package/rcw-smarc-sal28/Config.in"
 	source "package/rpi-firmware/Config.in"
 	source "package/sunxi-boards/Config.in"
package/qoriq-mc-binary/Config.in new file +48 -0

48 lines not on this page · raw message

package/qoriq-mc-binary/qoriq-mc-binary.hash new file +3 -0
new file mode 100644
index 000000000000..7afa62183c6c
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256  912ad8effd5c7b08eb277719b1e021b8b1fe4022dc3d961b419562e1d2d7a860  qoriq-mc-binary-10.39.0.tar.gz
+sha256  7a223031d76339df0e4e5a94d193a270fb9963d42b577aa42fe130a4657f3e17  LICENSE
package/qoriq-mc-binary/qoriq-mc-binary.mk new file +22 -0
new file mode 100644
index 000000000000..21f9468e7c45
@@ -0,0 +1,22 @@
+################################################################################
+#
+# qoriq-mc-binary
+#
+################################################################################
+
+QORIQ_MC_BINARY_VERSION = 10.39.0
+QORIQ_MC_BINARY_SITE = $(call github,nxp-qoriq,qoriq-mc-binary,mc_release_$(QORIQ_MC_BINARY_VERSION))
+QORIQ_MC_BINARY_LICENSE = NXP Binary EULA
+QORIQ_MC_BINARY_LICENSE_FILES = LICENSE
+QORIQ_MC_BINARY_INSTALL_IMAGES = YES
+QORIQ_MC_BINARY_INSTALL_TARGET = NO
+
+MC_PLATFORM = $(call qstrip,$(BR2_QORIQ_MC_PLATFORM))
+MC_DIR = $(call qstrip,$(BR2_QORIQ_MC_DIR))
+MC_BIN = mc_$(MC_PLATFORM)_$(QORIQ_MC_BINARY_VERSION).itb
+
+define QORIQ_MC_BINARY_INSTALL_IMAGES_CMDS
+	$(INSTALL) -D $(@D)/${MC_DIR}/${MC_BIN} $(BINARIES_DIR)/mc.itb
+endef
+
+$(eval $(generic-package))
Signature · 6 lines
2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#5 lore raw

PATCH 4/7 package/qoriq-mc-utils: new package

In reply to Vladimir Oltean

The configuration files for the MC firmware binary are distributed through a separate repository on GitHub, and need a different package. They are licensed differently than the firmware itself, and unlike the firmware, they are customizable.

Signed-off-by Vladimir Oltean <[email protected]>
---
 DEVELOPERS                                 |  1 +
 package/Config.in                          |  1 +
 package/qoriq-mc-utils/Config.in           | 35 ++++++++++++++++++++++
 package/qoriq-mc-utils/qoriq-mc-utils.hash |  3 ++
 package/qoriq-mc-utils/qoriq-mc-utils.mk   | 22 ++++++++++++++
 5 files changed, 62 insertions(+)
 create mode 100644 package/qoriq-mc-utils/Config.in
 create mode 100644 package/qoriq-mc-utils/qoriq-mc-utils.hash
 create mode 100644 package/qoriq-mc-utils/qoriq-mc-utils.mk
DEVELOPERS +1 -0
index adfdd97a044a..ace48c35961c 100644
@@ -3308,6 +3308,7 @@ F:	configs/ts5500_defconfig
 N:	Vladimir Oltean <[email protected]>
 F:	package/qoriq-ddr-phy-binary/
 F:	package/qoriq-mc-binary/
+F:	package/qoriq-mc-utils/
 
 N:	Volkov Viacheslav <[email protected]>
 F:	package/v4l2grab/
package/Config.in +1 -0
index 92f2f43a0bb1..47a4648f49a2 100644
@@ -457,6 +457,7 @@ menu "Firmware"
 	source "package/qoriq-ddr-phy-binary/Config.in"
 	source "package/qoriq-fm-ucode/Config.in"
 	source "package/qoriq-mc-binary/Config.in"
+	source "package/qoriq-mc-utils/Config.in"
 	source "package/rcw-smarc-sal28/Config.in"
 	source "package/rpi-firmware/Config.in"
 	source "package/sunxi-boards/Config.in"
package/qoriq-mc-utils/Config.in new file +35 -0
new file mode 100644
index 000000000000..bb45ffbc9ca7
@@ -0,0 +1,35 @@
+config BR2_PACKAGE_QORIQ_MC_UTILS
+	bool "qoriq-mc-utils"
+	help
+	  The Management Complex (MC) is a key component of the networking
+	  subsystem named DPAA2 (Data Path Acceleration Architecture, second
+	  version) in some NXP Layerscape SoCs.
+
+	  The MC firmware is configured through two distinct files named DPL
+	  and DPC, which are customizable by the end user. Example
+	  configuration files for NXP reference boards are distributed through
+	  this package, and are frequently patched to produce the configuration
+	  required in other scenarios.
+
+	  https://github.com/nxp-qoriq/mc-utils
+	  https://www.nxp.com/webapp/Download?colCode=DPAA2UM # sign in required
+
+if BR2_PACKAGE_QORIQ_MC_UTILS
+
+config BR2_PACKAGE_QORIQ_MC_UTILS_DPC
+	string "Data Path Configuration (DPC) file"
+	help
+	  The DPC file contains the settings defining the behavior of the MC
+	  firmware. Its source code follows the device tree syntax and is
+	  compiled to a device tree blob, which is the file that must be
+	  specified here.
+
+config BR2_PACKAGE_QORIQ_MC_UTILS_DPL
+	string "Data Path Layout (DPL) file"
+	help
+	  The DPL file contains a description of the initial networking objects
+	  created by the MC firmware when it boots. Its source code follows the
+	  device tree syntax and is compiled to a device tree blob, which is
+	  the file that must be specified here.
+
+endif
package/qoriq-mc-utils/qoriq-mc-utils.hash new file +3 -0
new file mode 100644
index 000000000000..f0234b9d1ff8
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256  1d3f4a6b2661cff9cfb5d4fcba3b181eb6febdd88a127fa069e306f51d778fc5  qoriq-mc-utils-10.39.0.tar.gz
+sha256  7a223031d76339df0e4e5a94d193a270fb9963d42b577aa42fe130a4657f3e17  LICENSE
package/qoriq-mc-utils/qoriq-mc-utils.mk new file +22 -0
new file mode 100644
index 000000000000..d4fc5e27385e
@@ -0,0 +1,22 @@
+################################################################################
+#
+# qoriq-mc-utils
+#
+################################################################################
+
+QORIQ_MC_UTILS_VERSION = 10.39.0
+QORIQ_MC_UTILS_SITE = $(call github,nxp-qoriq,mc-utils,mc_release_$(QORIQ_MC_UTILS_VERSION))
+QORIQ_MC_UTILS_LICENSE = BSD-3-Clause
+QORIQ_MC_UTILS_INSTALL_IMAGES = YES
+QORIQ_MC_UTILS_INSTALL_TARGET = NO
+
+define QORIQ_MC_UTILS_BUILD_CMDS
+	$(MAKE) -C $(@D)/config/
+endef
+
+define QORIQ_MC_UTILS_INSTALL_IMAGES_CMDS
+	$(INSTALL) -D $(@D)/config/$(call qstrip,$(BR2_PACKAGE_QORIQ_MC_UTILS_DPC)) $(BINARIES_DIR)/dpc.dtb
+	$(INSTALL) -D $(@D)/config/$(call qstrip,$(BR2_PACKAGE_QORIQ_MC_UTILS_DPL)) $(BINARIES_DIR)/dpl.dtb
+endef
+
+$(eval $(generic-package))
Signature · 6 lines
2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#6 lore raw

PATCH 5/7 package/qoriq-restool: new package

In reply to Vladimir Oltean

Introduce a package for the restool program, which permits the user to modify the network configuration of the DPAA2 subsystem and create one that is adequate to their use case.

Signed-off-by Vladimir Oltean <[email protected]>
---
 DEVELOPERS                               |  1 +
 package/Config.in                        |  1 +
 package/qoriq-restool/Config.in          | 21 +++++++++++++++++++++
 package/qoriq-restool/qoriq-restool.hash |  3 +++
 package/qoriq-restool/qoriq-restool.mk   | 24 ++++++++++++++++++++++++
 5 files changed, 50 insertions(+)
 create mode 100644 package/qoriq-restool/Config.in
 create mode 100644 package/qoriq-restool/qoriq-restool.hash
 create mode 100644 package/qoriq-restool/qoriq-restool.mk
DEVELOPERS +1 -0
index ace48c35961c..596a1f8ed36d 100644
@@ -3309,6 +3309,7 @@ N:	Vladimir Oltean <[email protected]>
 F:	package/qoriq-ddr-phy-binary/
 F:	package/qoriq-mc-binary/
 F:	package/qoriq-mc-utils/
+F:	package/qoriq-restool/
 
 N:	Volkov Viacheslav <[email protected]>
 F:	package/v4l2grab/
package/Config.in +1 -0
index 47a4648f49a2..d379a762bd55 100644
@@ -598,6 +598,7 @@ endmenu
 	source "package/pru-software-support/Config.in"
 	source "package/pulseview/Config.in"
 	source "package/qoriq-cadence-dp-firmware/Config.in"
+	source "package/qoriq-restool/Config.in"
 	source "package/raspi-gpio/Config.in"
 	source "package/rdma-core/Config.in"
 	source "package/read-edid/Config.in"
package/qoriq-restool/Config.in new file +21 -0
new file mode 100644
index 000000000000..3f1834a7dce0
@@ -0,0 +1,21 @@
+config BR2_PACKAGE_QORIQ_RESTOOL
+	bool "qoriq-restool"
+	help
+	  The DPAA2 architecture in Layerscape SoCs consists of
+	  networking resources that can be assembled into various
+	  nuggets of functionality, called "objects" (DPMAC, DPNI,
+	  DPDMUX, DPSW etc), by the Management Complex (MC) firmware.
+
+	  The MC firmware reads a file called Data Path Layout (DPL)
+	  which describes the set of networking objects it should
+	  create statically, at boot time.
+
+	  The restool program is able to talk to the Management Complex
+	  at runtime and permits the dynamic reconfiguration of
+	  networking objects, as well as saving the current configuration
+	  into a new DPL file. Without the restool program, the only
+	  possible networking configuration is that specified in the
+	  boot-time DPL file.
+
+	  https://github.com/nxp-qoriq/restool
+	  https://www.nxp.com/webapp/Download?colCode=DPAA2UM # sign in required
package/qoriq-restool/qoriq-restool.hash new file +3 -0
new file mode 100644
index 000000000000..c2332d9b27eb
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256  0cfced32caa615266ff633946d40a36660c856d7eb057b81de392570e136c5e5  qoriq-restool-lf-6.6.36-2.1.0.tar.gz
+sha256  68f4b15ecc085729419bc60ca6eeadca5af0237bbfec791e8a79da9c943d42e9  LICENSE
package/qoriq-restool/qoriq-restool.mk new file +24 -0
new file mode 100644
index 000000000000..4a89a80afa70
@@ -0,0 +1,24 @@
+###############################################################################
+#
+# qoriq-restool
+#
+################################################################################
+
+QORIQ_RESTOOL_VERSION = lf-6.6.36-2.1.0
+QORIQ_RESTOOL_SITE = $(call github,nxp-qoriq,restool,$(QORIQ_RESTOOL_VERSION))
+QORIQ_RESTOOL_LICENSE = GPL2.0
+QORIQ_RESTOOL_LICENSE_FILES = COPYING
+
+QORIQ_RESTOOL_MAKE_OPTS = \
+	CC="$(TARGET_CC)" \
+	CROSS_COMPILE="$(TARGET_CROSS)"
+
+define QORIQ_RESTOOL_BUILD_CMDS
+	cd $(@D) && $(TARGET_MAKE_ENV) $(MAKE) $(QORIQ_RESTOOL_MAKE_OPTS)
+endef
+
+define QORIQ_RESTOOL_INSTALL_TARGET_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) prefix=/usr install
+endef
+
+$(eval $(generic-package))
Signature · 6 lines
2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#7 lore raw

PATCH 7/7 board/freescale: get rid of common patch folder

In reply to Vladimir Oltean

Since commit 7cbc240ac2c3 ("configs/ls1028ardb: update to Linux 6.6"), no config file references this through BR2_GLOBAL_PATCH_DIR.

Special case [PATCH] feat(build): add support for new binutils versions, which is symlinked by board/solidrun/lx2160acex7. Instead of removing this, just move it there and delete the symlink.

Signed-off-by Vladimir Oltean <[email protected]>
---
 ...dd-support-for-new-binutils-versions.patch | 61 ------------------
 ...Makefile-Suppress-array-bounds-error.patch | 51 ---------------
 ...dd-support-for-new-binutils-versions.patch | 62 ++++++++++++++++++-
 3 files changed, 61 insertions(+), 113 deletions(-)
 delete mode 100644 board/freescale/common/patches/arm-trusted-firmware/0001-feat-build-add-support-for-new-binutils-versions.patch
 delete mode 100644 board/freescale/common/patches/arm-trusted-firmware/0002-LF-7968-01-fix-Makefile-Suppress-array-bounds-error.patch
 mode change 120000 => 100644 board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0015-feat-build-add-support-for-new-binutils-versions.patch
board/freescale/common/patches/arm-trusted-firmware/0001-feat-build-add-support-for-new-binutils-versions.patch deleted +0 -61
deleted file mode 100644
index 335c18553ac3..000000000000
@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <[email protected]>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/[email protected]/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <[email protected]>
-Signed-off-by: Robert Schwebel <[email protected]>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <[email protected]>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-
board/freescale/common/patches/arm-trusted-firmware/0002-LF-7968-01-fix-Makefile-Suppress-array-bounds-error.patch deleted +0 -51

51 lines not on this page · raw message

board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0015-feat-build-add-support-for-new-binutils-versions.patch deleted +0 -1
deleted file mode 120000
index 5ef794304fba..000000000000
@@ -1 +0,0 @@
-../../../../freescale/common/patches/arm-trusted-firmware/0001-feat-build-add-support-for-new-binutils-versions.patch
\ No newline at end of file
board/solidrun/lx2160acex7/patches/arm-trusted-firmware/0015-feat-build-add-support-for-new-binutils-versions.patch new file +61 -0

61 lines not on this page · raw message

Signature · 6 lines
2.43.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot