nvme: check at least one ns identification reported
PATCH v2 1/1 nvme: check at least one ns identification reported
Per the NVMe spec after 1.3:
At least one Namespace Identification Descriptor identifying the namespace (i.e., NIDT field set to 1h, 2h, or 3h).
Check there is at least one reported.
---
Changes from v1 to v2:
- Check only when the nvme version is greater than or equal to 1.3.
drivers/nvme/host/core.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
drivers/nvme/host/core.c +18 -2
@@ -1426,7 +1426,7 @@ static int nvme_identify_ctrl(struct nvme_ctrl *dev, struct nvme_id_ctrl **id) }static int nvme_process_ns_desc (struct nvme_ctrl *ctrl,struct nvme_ns_ids *ids, -struct nvme_ns_id_desc *cur,bool *csi_seen) +struct nvme_ns_id_desc *cur,bool *csi_seen,bool *has_id) {const char *warn_str ="ctrl returned bogus length:" ;void *data = cur;
@@ -1438,6 +1438,7 @@ static int nvme_process_ns_desc(struct nvme_ctrl *ctrl, struct nvme_ns_ids *ids, warn_str, cur->nidl);return -1 ; } + *has_id = true;if (ctrl->quirks &NVME_QUIRK_BOGUS_NID )return NVME_NIDT_EUI64_LEN ;memcpy (ids->eui64, data +sizeof (*cur),NVME_NIDT_EUI64_LEN );
@@ -1448,6 +1449,7 @@ static int nvme_process_ns_desc(struct nvme_ctrl *ctrl, struct nvme_ns_ids *ids, warn_str, cur->nidl);return -1 ; } + *has_id = true;if (ctrl->quirks &NVME_QUIRK_BOGUS_NID )return NVME_NIDT_NGUID_LEN ;memcpy (ids->nguid, data +sizeof (*cur),NVME_NIDT_NGUID_LEN );
@@ -1458,6 +1460,7 @@ static int nvme_process_ns_desc(struct nvme_ctrl *ctrl, struct nvme_ns_ids *ids, warn_str, cur->nidl);return -1 ; } + *has_id = true;if (ctrl->quirks &NVME_QUIRK_BOGUS_NID )return NVME_NIDT_UUID_LEN ;uuid_copy (&ids->uuid, data +sizeof (*cur));
@@ -1482,6 +1485,7 @@ static int nvme_identify_ns_descs(struct nvme_ctrl *ctrl, {struct nvme_command c = { };bool csi_seen = false; +bool has_id = false;int status, pos, len;void *data;
@@ -1513,13 +1517,25 @@ static int nvme_identify_ns_descs(struct nvme_ctrl *ctrl,if (cur->nidl ==0 )break ; - len =nvme_process_ns_desc (ctrl, &info->ids, cur, &csi_seen); + len =nvme_process_ns_desc (ctrl, &info->ids, cur, + &csi_seen, &has_id);if (len <0 )break ; len +=sizeof (*cur); } +/* +* NVMe 1.3 spec introduced ns identification, a controller should +* return at least one. +*/ +if (!has_id && ctrl->vs >=NVME_VS (1 ,3 ,0 )) { +dev_warn (ctrl->device, +"No identification reported for nsid:%d\n" , + info->nsid); + status = -EINVAL ; + } +if (nvme_multi_css (ctrl) && !csi_seen) {dev_warn (ctrl->device,"Command set not reported for nsid:%d\n" , info->nsid);
Signature · 1 line
2.43.0
Christoph Hellwig
maintainerQuoted 4 lines · Guixin Liu
Per the NVMe spec after 1.3:
At least one Namespace Identification Descriptor identifying the namespace (i.e., NIDT field set to 1h, 2h, or 3h).
Check there is at least one reported.
What problem does this try to solve?
Quoted 6 lines · Christoph Hellwig
Quoted 4 lines · Guixin Liu
Per the NVMe spec after 1.3:
At least one Namespace Identification Descriptor identifying the namespace (i.e., NIDT field set to 1h, 2h, or 3h).
Check there is at least one reported.What problem does this try to solve?
I assume that the dm-multipath will not recognize nvme device if nothing to return,
I was wrong, ignore this path plz.
Best Regards,
Guixin Liu
Christoph Hellwig
maintainerQuoted 1 line · Guixin Liu
I assume that the dm-multipath
dm-multipath is not supported with nvme..
Quoted 2 lines
will not recognize nvme device if nothing to
return,
But more importantly the user of the sysfs files is the right place the just check for these values being non-present. As said before it's perfectly valid for 1.0 devices so they have to cope with it anyway. I don't think a message in the kernel log that is very to process algorithmically is not very useful.
(I really with we'd have useful and required identifiers from the start, but that's a separate discussion)
Quoted 3 lines · Christoph Hellwig
Quoted 1 line · Guixin Liu
I assume that the dm-multipath
dm-multipath is not supported with nvme..
Dm-multipath can be configured to support nvme,
/etc/multipath.conf:
devices {
device {
vendor "NVME"
product ".*" path_grouping_policy group_by_prio }
}
Here is the result of "multipath -l":
uuid.a2c24be7-ed8e-4033-9f26-5b9f230265fb dm-0NVME,Linux size=1.0G features='0' hwhandler='0' wp=rw-+- policy='service-time 0' prio=0 status=active |- 0:1:2:1 nvme0n2 259:0 active undef running - 1:2:2:1 nvme1n2 259:3 active undef running
If the target haven't report any indentification, the dm-multipath
will use wwid which generated by nvme host driver to recognize
which namespaces should be merged.
Here is the result of "multipath -l", if we dont report any identification:
nvme.0000-6135363837366563633830646133663261643034-4c696e7578-00000001 dm-0 NVME,Linux size=1.0G features='0' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
|- 0:1:1:1 nvme0n1 259:0 active undef running
`- 1:2:1:1 nvme1n1 259:3 active undef running
Quoted 10 lines
Quoted 2 lines
will not recognize nvme device if nothing to
return,But more importantly the user of the sysfs files is the right place the just check for these values being non-present. As said before it's perfectly valid for 1.0 devices so they have to cope with it anyway. I don't think a message in the kernel log that is very to process algorithmically is not very useful.
(I really with we'd have useful and required identifiers from the start, but that's a separate discussion)
Agree, I just worry about that some components denpend on this, currently,
no problem.
Best Regards,
Guixin Liu