Bluetooth: btusb: Add new HWIDs for MT7925
Subsystems (2)
PATCH 1/1 Bluetooth: btusb: Add new HWIDs for MT7925
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID 0x0489, PID 0xe14f
VID 0x0489, PID 0xe150
VID 0x0489, PID 0xe151
Patch has been tested successfully and controller is recognized device pair successfully.
MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous
Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
--- drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/bluetooth/btusb.c +6 -0
@@ -658,6 +658,12 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |
Signature · 1 line
2.45.2
Dear Jiande,
Am 04.11.24 um 14:19 schrieb Jiande Lu:
Quoted 8 lines
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID
0x0489, PID0xe14f
VID0x0489, PID0xe150
VID0x0489, PID0xe151Patch has been tested successfully and controller is recognized device pair successfully.
Quoted 10 lines
MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version:0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous
Connection command is advertised, but not supported.
No line wrapping needed.
Quoted 21 lines
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11Signed-off-by Jiande Lu <[email protected]>--- drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/bluetooth/btusb.c +0
-0@@ -658,6 +658,12 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK |
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 669
Quoted 10 lines
drivers/bluetooth/btusb.c +6
-0BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |
With the small thing fixed:
Kind regards,
Paul
Dear Jiande,
Also, you could add the number to the summary:
Bluetooth: btusb: Add 4 HWIDs for MT7925
Am 04.11.24 um 15:20 schrieb Paul Menzel:
Quoted 62 lines
Am 04.11.24 um 14:19 schrieb Jiande Lu:
Quoted 8 lines
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID
0x0489, PID0xe14f
VID0x0489, PID0xe150
VID0x0489, PID0xe151Patch has been tested successfully and controller is recognized device pair successfully.
Quoted 10 lines
MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version:0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous
Connection command is advertised, but not supported.No line wrapping needed.
Quoted 23 lines
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11Signed-off-by Jiande Lu <[email protected]>---
drivers/bluetooth/btusb.c| 6 ++++++1 file changed, 6 insertions(+)drivers/bluetooth/btusb.c +0
-0@@ -658,6 +658,12 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH },{
USB_DEVICE(0x0489, 0xe139), .driver_info =BTUSB_MEDIATEK|BTUSB_WIDEBAND_SPEECH}, + {USB_DEVICE(0x0489, 0xe14f), .driver_info =BTUSB_MEDIATEK|Quoted 8 lines
+
BTUSB_WIDEBAND_SPEECH},
+ {USB_DEVICE(0x0489, 0xe150), .driver_info =BTUSB_MEDIATEK| +BTUSB_WIDEBAND_SPEECH},
+ {USB_DEVICE(0x0489, 0xe151), .driver_info =BTUSB_MEDIATEK| +BTUSB_WIDEBAND_SPEECH},
{USB_DEVICE(0x13d3, 0x3602), .driver_info =BTUSB_MEDIATEK|BTUSB_WIDEBAND_SPEECH}, {USB_DEVICE(0x13d3, 0x3603), .driver_info =BTUSB_MEDIATEK|With the small thing fixed:
Reviewed-by Paul Menzel <[email protected]>Kind regards,
Paul
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 9 lines · On Mon, 4 Nov 2024 21:19:04 +0800 you wrote:
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID
0x0489, PID0xe14f
VID0x0489, PID0xe150
VID0x0489, PID0xe151Patch has been tested successfully and controller is recognized device pair successfully.
[...]
Here is the summary with links:
- Bluetooth: btusb: Add new HWIDs for MT7925
https://git.kernel.org/bluetooth/bluetooth-next/c/408ec48013da
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html