Skip to contentSkip to conversation

5.10.229-rc1 review

PATCH In review Greg Kroah-Hartman 7 participants 118 messages Nov 6, 2024 – Nov 28, 2024

Subsystems (2)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.10.229-rc1 review

This is the start of the stable review cycle for the 5.10.229 release. There are 110 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 08 Nov 2024 12:02:47 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.229-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.10.229-rc1

Johannes Berg <[email protected]>

    mac80211: always have ieee80211_sta_restart()

Jeongjun Park <[email protected]>
vt: prevent kernel-infoleak in con_font_get()

Wachowski, Karol <[email protected]>
drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)

Jason-JH.Lin <[email protected]>
Revert "drm/mipi-dsi: Set the fwnode for mipi_dsi_device"

Jeongjun Park <[email protected]>
mm: shmem: fix data-race in shmem_getattr()

Ryusuke Konishi <[email protected]>
nilfs2: fix kernel bug due to missing clearing of checked flag

Pawan Gupta <[email protected]>
x86/bugs: Use code segment selector for VERW operand

Edward Adam Davis <[email protected]>
ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow

Chunyan Zhang <[email protected]>
riscv: Remove duplicated GET_RM

Chunyan Zhang <[email protected]>
riscv: Remove unused GENERATING_ASM_OFFSETS

WangYuli <[email protected]>
riscv: Use '%u' to format the output of 'cpu'

Heinrich Schuchardt <[email protected]>
riscv: efi: Set NX compat flag in PE/COFF header

Alexandre Ghiti <[email protected]>
riscv: vdso: Prevent the compiler from inserting calls to memset()

Linus Torvalds <[email protected]>
mm: avoid leaving partial pfn mappings around in error case

Christoph Hellwig <[email protected]>
mm: add remap_pfn_range_notrack

Ryusuke Konishi <[email protected]>
nilfs2: fix potential deadlock with newly created symlinks

Javier Carrasco <[email protected]>
iio: light: veml6030: fix microlux value calculation

Zicheng Qu <[email protected]>
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()

Ville Syrjälä <[email protected]>
wifi: iwlegacy: Clear stale interrupts before resuming device

Manikanta Pubbisetty <[email protected]>
wifi: ath10k: Fix memory leak in management tx

Felix Fietkau <[email protected]>
wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower

Greg Kroah-Hartman <[email protected]>
Revert "driver core: Fix uevent_show() vs driver detach race"

Basavaraj Natikar <[email protected]>
xhci: Use pm_runtime_get to prevent RPM on unsupported systems

Faisal Hassan <[email protected]>
xhci: Fix Link TRB DMA in command ring stopped completion event

Zijun Hu <[email protected]>
usb: phy: Fix API devm_usb_put_phy() can not release the phy

Zongmin Zhou <[email protected]>
usbip: tools: Fix detach_port() invalid port error path

Dimitri Sivanich <[email protected]>
misc: sgi-gru: Don't disable preemption in GRU driver

Dai Ngo <[email protected]>
NFS: remove revoked delegation from server's delegation list

Daniel Palmer <[email protected]>
net: amd: mvme147: Fix probe banner message

Xiongfeng Wang <[email protected]>
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()

Marco Elver <[email protected]>
kasan: Fix Software Tag-Based KASAN with GCC

Miguel Ojeda <[email protected]>
compiler-gcc: remove attribute support check for __no_sanitize_address__

Miguel Ojeda <[email protected]>
compiler-gcc: be consistent with underscores use for no_sanitize

Pablo Neira Ayuso <[email protected]>
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()

Benoît Monin <[email protected]>
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension

Xin Long <[email protected]>
net: support ip generic csum processing in skb_csum_hwoffload_help

Byeonguk Jeong <[email protected]>
bpf: Fix out-of-bounds write in trie_get_next_key()

Pedro Tammela <[email protected]>
net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT

Pablo Neira Ayuso <[email protected]>
gtp: allow -1 to be specified as file description from userspace

Ido Schimmel <[email protected]>
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow()

Wander Lairson Costa <[email protected]>
igb: Disable threaded IRQ for igb_msix_other

Christophe JAILLET <[email protected]>
ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()

Daniel Gabay <[email protected]>
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()

Emmanuel Grumbach <[email protected]>
wifi: iwlwifi: mvm: disconnect station vifs if recovery failed

Youghandhar Chintala <[email protected]>
mac80211: Add support to trigger sta disconnect on hardware restart

Johannes Berg <[email protected]>
mac80211: do drv_reconfig_complete() before restarting all

Selvin Xavier <[email protected]>
RDMA/bnxt_re: synchronize the qp-handle table array

Patrisious Haddad <[email protected]>
RDMA/mlx5: Round max_rd_atomic/max_dest_rd_atomic up instead of down

Leon Romanovsky <[email protected]>
RDMA/cxgb4: Dump vendor specific QP details

Geert Uytterhoeven <[email protected]>
wifi: brcm80211: BRCM_TRACING should depend on TRACING

Felix Fietkau <[email protected]>
wifi: mac80211: skip non-uploaded keys in ieee80211_iter_keys

Geert Uytterhoeven <[email protected]>
mac80211: MAC80211_MESSAGE_TRACING should depend on TRACING

Xiu Jianfeng <[email protected]>
cgroup: Fix potential overflow issue when checking max_depth

Donet Tom <[email protected]>

    selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test

Sabrina Dubroca <[email protected]>
xfrm: validate new SA's prefixlen using SA family when sel.family is unset

junhua huang <[email protected]>
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning

Zichen Xie <[email protected]>
ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()

Michel Alex <[email protected]>
net: phy: dp83822: Fix reset pin definitions

Jiri Slaby (SUSE) <[email protected]>
serial: protect uart_port_dtr_rts() in uart_shutdown() too

Paul Moore <[email protected]>
selinux: improve error checking in sel_write_load()

Haiyang Zhang <[email protected]>
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event

José Relvas <[email protected]>
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593

Sean Christopherson <[email protected]>
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory

Aleksa Sarai <[email protected]>
openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)

Ryusuke Konishi <[email protected]>
nilfs2: fix kernel bug due to missing clearing of buffer delay flag

Shubham Panwar <[email protected]>
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue

Christian Heusel <[email protected]>

    ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]

Mario Limonciello <[email protected]>
drm/amd: Guard against bad data for ATIF ACPI method

Kailang Yang <[email protected]>
ALSA: hda/realtek: Update default depop procedure

Andrey Shumilin <[email protected]>
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()

Jinjie Ruan <[email protected]>
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()

Heiner Kallweit <[email protected]>
r8169: avoid unsolicited interrupts

Dmitry Antipov <[email protected]>
net: sched: fix use-after-free in taprio_change()

Oliver Neukum <[email protected]>
net: usb: usbnet: fix name regression

Wang Hai <[email protected]>
be2net: fix potential memory leak in be_xmit()

Wang Hai <[email protected]>

    net/sun3_82586: fix potential memory leak in sun3_82586_send_packet()

Eyal Birger <[email protected]>
xfrm: respect ip protocols rules criteria when performing dst lookups

Eyal Birger <[email protected]>
xfrm: extract dst lookup parameters into a struct

Leo Yan <[email protected]>
tracing: Consider the NULL character when validating the event length

Dave Kleikamp <[email protected]>
jfs: Fix sanity check in dbMount

Mark Rutland <[email protected]>
arm64: Force position-independent veneers

Shengjiu Wang <[email protected]>
ASoC: fsl_sai: Enable 'FIFO continue on error' FCONT bit

Hans de Goede <[email protected]>
drm/vboxvideo: Replace fake VLA at end of vbva_mouse_pointer_shape with real VLA

Christoph Hellwig <[email protected]>
iomap: update ki_pos a little later in iomap_dio_complete

Mateusz Guzik <[email protected]>
exec: don't WARN for racy path_noexec check

Yu Kuai <[email protected]>
block, bfq: fix procress reference leakage for bfqq in merge chain

Nico Boehr <[email protected]>
KVM: s390: gaccess: Check if guest address is in memslot

Janis Schoetterl-Glausch <[email protected]>
KVM: s390: gaccess: Cleanup access to guest pages

Janis Schoetterl-Glausch <[email protected]>
KVM: s390: gaccess: Refactor access address range check

Janis Schoetterl-Glausch <[email protected]>
KVM: s390: gaccess: Refactor gpa and length calculation

Mark Rutland <[email protected]>
arm64: probes: Fix uprobes for big-endian kernels

junhua huang <[email protected]>
arm64:uprobe fix the uprobe SWBP_INSN in big-endian

Ye Bin <[email protected]>
Bluetooth: bnep: fix wild-memory-access in proto_unregister

Heiko Carstens <[email protected]>
s390: Initialize psw mask in perf_arch_fetch_caller_regs()

Thadeu Lima de Souza Cascardo <[email protected]>
usb: typec: altmode should keep reference to parent

Paulo Alcantara <[email protected]>
smb: client: fix OOBs when building SMB2_IOCTL request

Wang Hai <[email protected]>
scsi: target: core: Fix null-ptr-deref in target_alloc_device()

Eric Dumazet <[email protected]>
genetlink: hold RCU in genlmsg_mcast()

Wang Hai <[email protected]>
net: systemport: fix potential memory leak in bcm_sysport_xmit()

Li RongQing <[email protected]>
net/smc: Fix searching in list of known pnetids in smc_pnet_add_pnetid

Wang Hai <[email protected]>
net: ethernet: aeroflex: fix potential memory leak in greth_start_xmit_gbit()

Sabrina Dubroca <[email protected]>
macsec: don't increment counters for an unrelated SA

Jonathan Marek <[email protected]>
drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculation

Bhargava Chenna Marreddy <[email protected]>
RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages

Kalesh AP <[email protected]>
RDMA/bnxt_re: Return more meaningful error

Xin Long <[email protected]>
ipv4: give an IPv4 dev to blackhole_netdev

Anumula Murali Mohan Reddy <[email protected]>
RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP

Florian Klink <[email protected]>
ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin

Kalesh AP <[email protected]>
RDMA/bnxt_re: Add a check for memory allocation

Saravanan Vajravel <[email protected]>
RDMA/bnxt_re: Fix incorrect AVID type in WQE structure

-------------

Diffstat:

 Makefile                                        |   4 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts       |   2 +-
 arch/arm64/Makefile                             |   2 +-
 arch/arm64/include/asm/uprobes.h                |  12 +-
 arch/arm64/kernel/probes/uprobes.c              |   4 +-
 arch/riscv/kernel/asm-offsets.c                 |   2 -
 arch/riscv/kernel/cpu-hotplug.c                 |   2 +-
 arch/riscv/kernel/efi-header.S                  |   2 +-
 arch/riscv/kernel/traps_misaligned.c            |   2 -
 arch/riscv/kernel/vdso/Makefile                 |   1 +
 arch/s390/include/asm/perf_event.h              |   1 +
 arch/s390/kvm/gaccess.c                         | 162 ++++++++++++++----------
 arch/s390/kvm/gaccess.h                         |  14 +-
 arch/x86/include/asm/nospec-branch.h            |  11 +-
 arch/x86/kvm/svm/nested.c                       |   6 +-
 block/bfq-iosched.c                             |  33 +++--
 drivers/acpi/button.c                           |  11 ++
 drivers/acpi/resource.c                         |   7 +
 drivers/base/core.c                             |  13 +-
 drivers/base/module.c                           |   4 -
 drivers/firmware/arm_sdei.c                     |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c        |  15 ++-
 drivers/gpu/drm/drm_gem_shmem_helper.c          |   5 +
 drivers/gpu/drm/drm_mipi_dsi.c                  |   2 +-
 drivers/gpu/drm/msm/dsi/dsi_host.c              |   2 +-
 drivers/gpu/drm/vboxvideo/hgsmi_base.c          |  10 +-
 drivers/gpu/drm/vboxvideo/vboxvideo.h           |   4 +-
 drivers/iio/light/veml6030.c                    |   2 +-
 drivers/infiniband/hw/bnxt_re/qplib_fp.c        |   4 +
 drivers/infiniband/hw/bnxt_re/qplib_fp.h        |   2 +-
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.c      |  15 ++-
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.h      |   2 +
 drivers/infiniband/hw/bnxt_re/qplib_res.c       |  21 +--
 drivers/infiniband/hw/cxgb4/cm.c                |   9 +-
 drivers/infiniband/hw/cxgb4/provider.c          |   1 +
 drivers/infiniband/hw/mlx5/qp.c                 |   4 +-
 drivers/misc/sgi-gru/grukservices.c             |   2 -
 drivers/misc/sgi-gru/grumain.c                  |   4 -
 drivers/misc/sgi-gru/grutlbpurge.c              |   2 -
 drivers/net/ethernet/aeroflex/greth.c           |   3 +-
 drivers/net/ethernet/amd/mvme147.c              |   7 +-
 drivers/net/ethernet/broadcom/bcmsysport.c      |   1 +
 drivers/net/ethernet/emulex/benet/be_main.c     |  10 +-
 drivers/net/ethernet/i825xx/sun3_82586.c        |   1 +
 drivers/net/ethernet/intel/igb/igb_main.c       |   2 +-
 drivers/net/ethernet/realtek/r8169_main.c       |   4 +-
 drivers/net/gtp.c                               |  22 ++--
 drivers/net/hyperv/netvsc_drv.c                 |  30 +++++
 drivers/net/macsec.c                            |  18 ---
 drivers/net/phy/dp83822.c                       |   4 +-
 drivers/net/usb/usbnet.c                        |   3 +-
 drivers/net/wireless/ath/ath10k/wmi-tlv.c       |   7 +-
 drivers/net/wireless/ath/ath10k/wmi.c           |   2 +
 drivers/net/wireless/broadcom/brcm80211/Kconfig |   1 +
 drivers/net/wireless/intel/iwlegacy/common.c    |   2 +
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c     |  22 +++-
 drivers/staging/iio/frequency/ad9832.c          |   7 +-
 drivers/target/target_core_device.c             |   2 +-
 drivers/target/target_core_user.c               |   2 +-
 drivers/tty/serial/serial_core.c                |  16 ++-
 drivers/tty/vt/vt.c                             |   2 +-
 drivers/usb/host/xhci-pci.c                     |   6 +-
 drivers/usb/host/xhci-ring.c                    |  16 +--
 drivers/usb/phy/phy.c                           |   2 +-
 drivers/usb/typec/class.c                       |   3 +
 fs/cifs/smb2pdu.c                               |   9 ++
 fs/exec.c                                       |  21 ++-
 fs/iomap/direct-io.c                            |  18 +--
 fs/jfs/jfs_dmap.c                               |   2 +-
 fs/nfs/delegation.c                             |   5 +
 fs/nilfs2/namei.c                               |   3 +
 fs/nilfs2/page.c                                |   7 +-
 fs/ocfs2/file.c                                 |   8 ++
 fs/open.c                                       |   2 +
 include/linux/compiler-gcc.h                    |  12 +-
 include/linux/mm.h                              |   2 +
 include/net/genetlink.h                         |   3 +-
 include/net/ip_tunnels.h                        |   2 +-
 include/net/mac80211.h                          |  10 ++
 include/net/xfrm.h                              |  28 ++--
 kernel/bpf/lpm_trie.c                           |   2 +-
 kernel/cgroup/cgroup.c                          |   4 +-
 kernel/time/posix-clock.c                       |   6 +-
 kernel/trace/trace_probe.c                      |   2 +-
 mm/memory.c                                     |  72 +++++++----
 mm/shmem.c                                      |   2 +
 net/bluetooth/bnep/core.c                       |   3 +-
 net/core/dev.c                                  |  17 ++-
 net/ipv4/devinet.c                              |  35 +++--
 net/ipv4/xfrm4_policy.c                         |  38 +++---
 net/ipv6/xfrm6_policy.c                         |  31 ++---
 net/l2tp/l2tp_netlink.c                         |   4 +-
 net/mac80211/Kconfig                            |   2 +-
 net/mac80211/cfg.c                              |   3 +-
 net/mac80211/ieee80211_i.h                      |   3 +
 net/mac80211/key.c                              |  42 +++---
 net/mac80211/mlme.c                             |  14 +-
 net/mac80211/util.c                             |  45 +++++--
 net/netfilter/nft_payload.c                     |   3 +
 net/netlink/genetlink.c                         |  28 ++--
 net/sched/sch_api.c                             |   2 +-
 net/sched/sch_taprio.c                          |   3 +-
 net/smc/smc_pnet.c                              |   2 +-
 net/wireless/nl80211.c                          |   8 +-
 net/xfrm/xfrm_device.c                          |  11 +-
 net/xfrm/xfrm_policy.c                          |  50 ++++++--
 net/xfrm/xfrm_user.c                            |   6 +-
 security/selinux/selinuxfs.c                    |  27 ++--
 sound/firewire/amdtp-stream.c                   |   3 +
 sound/pci/hda/patch_realtek.c                   |  48 ++++---
 sound/soc/codecs/cs42l51.c                      |   7 +-
 sound/soc/fsl/fsl_sai.c                         |   5 +-
 sound/soc/fsl/fsl_sai.h                         |   1 +
 sound/soc/qcom/lpass-cpu.c                      |   2 +
 tools/testing/selftests/vm/hmm-tests.c          |   2 +-
 tools/usb/usbip/src/usbip_detach.c              |   1 +
 116 files changed, 791 insertions(+), 473 deletions(-)
author maintainer
#1 lore raw

PATCH 1/110 RDMA/bnxt_re: Fix incorrect AVID type in WQE structure

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Saravanan Vajravel <[email protected]>

[ Upstream commit 9ab20f76ae9fad55ebaf36bdff04aea1c2552374 ]

Driver uses internal data structure to construct WQE frame. It used avid type as u16 which can accommodate up to 64K AVs. When outstanding AVID crosses 64K, driver truncates AVID and hence it uses incorrect AVID to WR. This leads to WR failure due to invalid AV ID and QP is moved to error state with reason set to 19 (INVALID AVID). When RDMA CM path is used, this issue hits QP1 and it is moved to error state

---
 drivers/infiniband/hw/bnxt_re/qplib_fp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/bnxt_re/qplib_fp.h +1 -1
index f112f013df7d9..01cb48caa9dbd 100644
@@ -167,7 +167,7 @@ struct bnxt_qplib_swqe {
 			};
 			u32		q_key;
 			u32		dst_qp;
-			u16		avid;
+			u32		avid;
 		} send;
 
 		/* Send Raw Ethernet and QP1 */
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 2/110 RDMA/bnxt_re: Add a check for memory allocation

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kalesh AP <[email protected]>

[ Upstream commit c5c1ae73b7741fa3b58e6e001b407825bb971225 ]

__alloc_pbl() can return error when memory allocation fails. Driver is not checking the status on one of the instances.

---
 drivers/infiniband/hw/bnxt_re/qplib_res.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/hw/bnxt_re/qplib_res.c +2 -0
index 123ea759f2826..2861a2bbea6e4 100644
@@ -243,6 +243,8 @@ int bnxt_qplib_alloc_init_hwq(struct bnxt_qplib_hwq *hwq,
 			sginfo.pgsize = npde * pg_size;
 			sginfo.npages = 1;
 			rc = __alloc_pbl(res, &hwq->pbl[PBL_LVL_0], &sginfo);
+			if (rc)
+				goto fail;
 
 			/* Alloc PBL pages */
 			sginfo.npages = npbl;
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 3/110 ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Klink <[email protected]>

[ Upstream commit dc7785e4723510616d776862ddb4c08857a1bdb2 ]

HDMI_HPD_N_1V8 is connected to GPIO pin 0, not 1.

This fixes HDMI hotplug/output detection.

See https://datasheets.raspberrypi.com/cm/cm3-schematics.pdf

Fixes a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board")
---
 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts +1 -1
index 3dfce4312dfc4..a2ef43c2105aa 100644
@@ -77,7 +77,7 @@
 };
 
 &hdmi {
-	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
 	status = "okay";
 };
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 4/110 RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anumula Murali Mohan Reddy <[email protected]>

[ Upstream commit c659b405b82ead335bee6eb33f9691bf718e21e8 ]

ip_dev_find() always returns real net_device address, whether traffic is running on a vlan or real device, if traffic is over vlan, filling endpoint struture with real ndev and an attempt to send a connect request will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the issue by using vlan_dev_real_dev().

Fixes 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
---
 drivers/infiniband/hw/cxgb4/cm.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/infiniband/hw/cxgb4/cm.c +4 -5
index 95300b2e1ffe9..b607c17827382 100644
@@ -2086,7 +2086,7 @@ static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip,
 	err = -ENOMEM;
 	if (n->dev->flags & IFF_LOOPBACK) {
 		if (iptype == 4)
-			pdev = ip_dev_find(&init_net, *(__be32 *)peer_ip);
+			pdev = __ip_dev_find(&init_net, *(__be32 *)peer_ip, false);
 		else if (IS_ENABLED(CONFIG_IPV6))
 			for_each_netdev(&init_net, pdev) {
 				if (ipv6_chk_addr(&init_net,
@@ -2101,12 +2101,12 @@ static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip,
 			err = -ENODEV;
 			goto out;
 		}
+		if (is_vlan_dev(pdev))
+			pdev = vlan_dev_real_dev(pdev);
 		ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
 					n, pdev, rt_tos2priority(tos));
-		if (!ep->l2t) {
-			dev_put(pdev);
+		if (!ep->l2t)
 			goto out;
-		}
 		ep->mtu = pdev->mtu;
 		ep->tx_chan = cxgb4_port_chan(pdev);
 		ep->smac_idx = ((struct port_info *)netdev_priv(pdev))->smt_idx;
@@ -2119,7 +2119,6 @@ static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip,
 		ep->rss_qid = cdev->rdev.lldi.rxq_ids[
 			cxgb4_port_idx(pdev) * step];
 		set_tcp_window(ep, (struct port_info *)netdev_priv(pdev));
-		dev_put(pdev);
 	} else {
 		pdev = get_real_dev(n->dev);
 		ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 5/110 ipv4: give an IPv4 dev to blackhole_netdev

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 22600596b6756b166fd052d5facb66287e6f0bad ]

After commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"), blackhole_netdev was introduced to invalidate dst cache entries on the TX path whenever the cache times out or is flushed.

When two UDP sockets (sk1 and sk2) send messages to the same destination simultaneously, they are using the same dst cache. If the dst cache is invalidated on one path (sk2) while the other (sk1) is still transmitting, sk1 may try to use the invalid dst entry.

         CPU1                   CPU2

      udp_sendmsg(sk1)       udp_sendmsg(sk2)
      udp_send_skb()
      ip_output()
                                             <--- dst timeout or flushed
                             dst_dev_put()
      ip_finish_output2()
      ip_neigh_for_gw()

This results in a scenario where ip_neigh_for_gw() returns -EINVAL because blackhole_dev lacks an in_dev, which is needed to initialize the neigh in arp_constructor(). This error is then propagated back to userspace, breaking the UDP application.

The patch fixes this issue by assigning an in_dev to blackhole_dev for IPv4, similar to what was done for IPv6 in commit e5f80fcf869a ("ipv6:
give an IPv6 dev to blackhole_netdev"). This ensures that even when the dst entry is invalidated with blackhole_dev, it will not fail to create the neigh entry.

As devinet_init() is called ealier than blackhole_netdev_init() in system booting, it can not assign the in_dev to blackhole_dev in devinet_init(). As Paolo suggested, add a separate late_initcall() in devinet.c to ensure inet_blackhole_dev_init() is called after blackhole_netdev_init().

---
 net/ipv4/devinet.c | 35 +++++++++++++++++++++++++----------
 1 file changed, 25 insertions(+), 10 deletions(-)
net/ipv4/devinet.c +25 -10
index 7868f316a477f..6918b3ced6713 100644
@@ -273,17 +273,19 @@ static struct in_device *inetdev_init(struct net_device *dev)
 	/* Account for reference dev->ip_ptr (below) */
 	refcount_set(&in_dev->refcnt, 1);
 
-	err = devinet_sysctl_register(in_dev);
-	if (err) {
-		in_dev->dead = 1;
-		neigh_parms_release(&arp_tbl, in_dev->arp_parms);
-		in_dev_put(in_dev);
-		in_dev = NULL;
-		goto out;
+	if (dev != blackhole_netdev) {
+		err = devinet_sysctl_register(in_dev);
+		if (err) {
+			in_dev->dead = 1;
+			neigh_parms_release(&arp_tbl, in_dev->arp_parms);
+			in_dev_put(in_dev);
+			in_dev = NULL;
+			goto out;
+		}
+		ip_mc_init_dev(in_dev);
+		if (dev->flags & IFF_UP)
+			ip_mc_up(in_dev);
 	}
-	ip_mc_init_dev(in_dev);
-	if (dev->flags & IFF_UP)
-		ip_mc_up(in_dev);
 
 	/* we can receive as soon as ip_ptr is set -- do this last */
 	rcu_assign_pointer(dev->ip_ptr, in_dev);
@@ -328,6 +330,19 @@ static void inetdev_destroy(struct in_device *in_dev)
 	call_rcu(&in_dev->rcu_head, in_dev_rcu_put);
 }
 
+static int __init inet_blackhole_dev_init(void)
+{
+	int err = 0;
+
+	rtnl_lock();
+	if (!inetdev_init(blackhole_netdev))
+		err = -ENOMEM;
+	rtnl_unlock();
+
+	return err;
+}
+late_initcall(inet_blackhole_dev_init);
+
 int inet_addr_onlink(struct in_device *in_dev, __be32 a, __be32 b)
 {
 	const struct in_ifaddr *ifa;
Signature · 1 line
2.43.0
author maintainer
#6 lore raw

PATCH 6/110 RDMA/bnxt_re: Return more meaningful error

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kalesh AP <[email protected]>

[ Upstream commit 98647df0178df215b8239c5c365537283b2852a6 ]

When the HWRM command fails, driver currently returns -EFAULT(Bad address). This does not look correct.

Modified to return -EIO(I/O error).

Fixes cc1ec769b87c ("RDMA/bnxt_re: Fixing the Control path command and response handling")
Fixes 65288a22ddd8 ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command")
---
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c +1 -1
index 2b0c3a86293cf..148f2c51a9460 100644
@@ -245,7 +245,7 @@ int bnxt_qplib_rcfw_send_message(struct bnxt_qplib_rcfw *rcfw,
 		/* failed with status */
 		dev_err(&rcfw->pdev->dev, "cmdq[%#x]=%#x status %#x\n",
 			cookie, opcode, evnt->status);
-		rc = -EFAULT;
+		rc = -EIO;
 	}
 
 	return rc;
Signature · 1 line
2.43.0
author maintainer
#7 lore raw

PATCH 7/110 RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bhargava Chenna Marreddy <[email protected]>

[ Upstream commit 7988bdbbb85ac85a847baf09879edcd0f70521dc ]

Avoid memory corruption while setting up Level-2 PBL pages for the non MR resources when num_pages > 256K.

There will be a single PDE page address (contiguous pages in the case of > PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid memory access after 256K PBL entries in the PDE.

Fixes 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
---
 drivers/infiniband/hw/bnxt_re/qplib_res.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)
drivers/infiniband/hw/bnxt_re/qplib_res.c +3 -16
index 2861a2bbea6e4..af23e57fc78ed 100644
@@ -256,22 +256,9 @@ int bnxt_qplib_alloc_init_hwq(struct bnxt_qplib_hwq *hwq,
 			dst_virt_ptr =
 				(dma_addr_t **)hwq->pbl[PBL_LVL_0].pg_arr;
 			src_phys_ptr = hwq->pbl[PBL_LVL_1].pg_map_arr;
-			if (hwq_attr->type == HWQ_TYPE_MR) {
-			/* For MR it is expected that we supply only 1 contigous
-			 * page i.e only 1 entry in the PDL that will contain
-			 * all the PBLs for the user supplied memory region
-			 */
-				for (i = 0; i < hwq->pbl[PBL_LVL_1].pg_count;
-				     i++)
-					dst_virt_ptr[0][i] = src_phys_ptr[i] |
-						flag;
-			} else {
-				for (i = 0; i < hwq->pbl[PBL_LVL_1].pg_count;
-				     i++)
-					dst_virt_ptr[PTR_PG(i)][PTR_IDX(i)] =
-						src_phys_ptr[i] |
-						PTU_PDE_VALID;
-			}
+			for (i = 0; i < hwq->pbl[PBL_LVL_1].pg_count; i++)
+				dst_virt_ptr[0][i] = src_phys_ptr[i] | flag;
+
 			/* Alloc or init PTEs */
 			rc = __alloc_pbl(res, &hwq->pbl[PBL_LVL_2],
 					 hwq_attr->sginfo);
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 8/110 drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculation

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jonathan Marek <[email protected]>

[ Upstream commit 358b762400bd94db2a14a72dfcef74c7da6bd845 ]

When (mode->clock * 1000) is larger than (1<<31), int to unsigned long conversion will sign extend the int to 64 bits and the pclk_rate value will be incorrect.

Fix this by making the result of the multiplication unsigned.

Note that above (1<<32) would still be broken and require more changes, but its unlikely anyone will need that anytime soon.

Fixes c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions")

Patchwork: https://patchwork.freedesktop.org/patch/618434/

---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +1 -1
index fb7792ca39e2c..b69099b533bfe 100644
@@ -685,7 +685,7 @@ static u32 dsi_get_pclk_rate(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	struct drm_display_mode *mode = msm_host->mode;
 	u32 pclk_rate;
 
-	pclk_rate = mode->clock * 1000;
+	pclk_rate = mode->clock * 1000u;
 
 	/*
 	 * For dual DSI mode, the current DRM mode has the complete width of the
Signature · 1 line
2.43.0
author maintainer
#9 lore raw

PATCH 9/110 macsec: dont increment counters for an unrelated SA

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <[email protected]>

[ Upstream commit cf58aefb1332db322060cad4a330d5f9292b0f41 ]

On RX, we shouldn't be incrementing the stats for an arbitrary SA in case the actual SA hasn't been set up. Those counters are intended to track packets for their respective AN when the SA isn't currently configured. Due to the way MACsec is implemented, we don't keep counters unless the SA is configured, so we can't track those packets, and those counters will remain at 0.

The RXSC's stats keeps track of those packets without telling us which AN they belonged to. We could add counters for non-existent SAs, and then find a way to integrate them in the dump to userspace, but I don't think it's worth the effort.

---
 drivers/net/macsec.c | 18 ------------------
 1 file changed, 18 deletions(-)
drivers/net/macsec.c +0 -18
index 83b02dc7dfd2d..5e30fd017b3ac 100644
@@ -159,19 +159,6 @@ static struct macsec_rx_sa *macsec_rxsa_get(struct macsec_rx_sa __rcu *ptr)
 	return sa;
 }
 
-static struct macsec_rx_sa *macsec_active_rxsa_get(struct macsec_rx_sc *rx_sc)
-{
-	struct macsec_rx_sa *sa = NULL;
-	int an;
-
-	for (an = 0; an < MACSEC_NUM_AN; an++)	{
-		sa = macsec_rxsa_get(rx_sc->sa[an]);
-		if (sa)
-			break;
-	}
-	return sa;
-}
-
 static void free_rx_sc_rcu(struct rcu_head *head)
 {
 	struct macsec_rx_sc *rx_sc = container_of(head, struct macsec_rx_sc, rcu_head);
@@ -1196,15 +1183,12 @@ static rx_handler_result_t macsec_handle_frame(struct sk_buff **pskb)
 		/* If validateFrames is Strict or the C bit in the
 		 * SecTAG is set, discard
 		 */
-		struct macsec_rx_sa *active_rx_sa = macsec_active_rxsa_get(rx_sc);
 		if (hdr->tci_an & MACSEC_TCI_C ||
 		    secy->validate_frames == MACSEC_VALIDATE_STRICT) {
 			u64_stats_update_begin(&rxsc_stats->syncp);
 			rxsc_stats->stats.InPktsNotUsingSA++;
 			u64_stats_update_end(&rxsc_stats->syncp);
 			DEV_STATS_INC(secy->netdev, rx_errors);
-			if (active_rx_sa)
-				this_cpu_inc(active_rx_sa->stats->InPktsNotUsingSA);
 			goto drop_nosa;
 		}
 
@@ -1214,8 +1198,6 @@ static rx_handler_result_t macsec_handle_frame(struct sk_buff **pskb)
 		u64_stats_update_begin(&rxsc_stats->syncp);
 		rxsc_stats->stats.InPktsUnusedSA++;
 		u64_stats_update_end(&rxsc_stats->syncp);
-		if (active_rx_sa)
-			this_cpu_inc(active_rx_sa->stats->InPktsUnusedSA);
 		goto deliver;
 	}
 
Signature · 1 line
2.43.0
author maintainer
#10 lore raw

PATCH 10/110 net: ethernet: aeroflex: fix potential memory leak in greth_start_xmit_gbit()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Hai <[email protected]>

[ Upstream commit cf57b5d7a2aad456719152ecd12007fe031628a3 ]

The greth_start_xmit_gbit() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it.

Fixes d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
---
 drivers/net/ethernet/aeroflex/greth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/aeroflex/greth.c +2 -1
index 0d56cb4f5dd9b..c84b9acc319f7 100644
@@ -484,7 +484,7 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(skb->len > MAX_FRAME_SIZE)) {
 		dev->stats.tx_errors++;
-		goto out;
+		goto len_error;
 	}
 
 	/* Save skb pointer. */
@@ -575,6 +575,7 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
 map_error:
 	if (net_ratelimit())
 		dev_warn(greth->dev, "Could not create TX DMA mapping\n");
+len_error:
 	dev_kfree_skb(skb);
 out:
 	return err;
Signature · 1 line
2.43.0
author maintainer
#11 lore raw

PATCH 11/110 net/smc: Fix searching in list of known pnetids in smc_pnet_add_pnetid

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Li RongQing <[email protected]>

[ Upstream commit 82ac39ebd6db0c9f7a97a934bda1e3e101a9d201 ]

pnetid of pi (not newly allocated pe) should be compared

---
 net/smc/smc_pnet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/smc/smc_pnet.c +1 -1
index ed9cfa11b589f..7824b32cdb66c 100644
@@ -744,7 +744,7 @@ static int smc_pnet_add_pnetid(struct net *net, u8 *pnetid)
 
 	write_lock(&sn->pnetids_ndev.lock);
 	list_for_each_entry(pi, &sn->pnetids_ndev.list, list) {
-		if (smc_pnet_match(pnetid, pe->pnetid)) {
+		if (smc_pnet_match(pnetid, pi->pnetid)) {
 			refcount_inc(&pi->refcnt);
 			kfree(pe);
 			goto unlock;
Signature · 1 line
2.43.0
author maintainer
#12 lore raw

PATCH 12/110 net: systemport: fix potential memory leak in bcm_sysport_xmit()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Hai <[email protected]>

[ Upstream commit c401ed1c709948e57945485088413e1bb5e94bd1 ]

The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it.

Fixes 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/broadcom/bcmsysport.c +1 -0
index 82d369d9f7a50..ae1cf2ead9a96 100644
@@ -1343,6 +1343,7 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 		netif_err(priv, tx_err, dev, "DMA map failed at %p (len=%d)\n",
 			  skb->data, skb_len);
 		ret = NETDEV_TX_OK;
+		dev_kfree_skb_any(skb);
 		goto out;
 	}
 
Signature · 1 line
2.43.0
author maintainer
#13 lore raw

PATCH 13/110 genetlink: hold RCU in genlmsg_mcast()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 56440d7ec28d60f8da3bfa09062b3368ff9b16db ]

While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw one lockdep splat [1].

genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU.

Instead of letting all callers guard genlmsg_multicast_allns() with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast().

This also means the @flags parameter is useless, we need to always use GFP_ATOMIC.

[1]

[10882.424136] =============================
[10882.424166] WARNING: suspicious RCU usage
[10882.424309] 6.12.0-rc2-virtme #1156 Not tainted
[10882.424400] -----------------------------
[10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!!
[10882.424469]

other info that might help us debug this:

[10882.424500]
rcu_scheduler_active = 2, debug_locks = 1
[10882.424744] 2 locks held by ip/15677:
[10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219)
[10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209)
[10882.426465]
stack backtrace:
[10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156
[10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[10882.427046] Call Trace:
[10882.427131]  <TASK>
[10882.427244] dump_stack_lvl (lib/dump_stack.c:123)
[10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
[10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7))
[10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink
[10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink
[10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115)
[10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210)
[10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink
[10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201)
[10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551)
[10882.428069] genl_rcv (net/netlink/genetlink.c:1220)
[10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357)
[10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901)
[10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1))
Fixes 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners")
Cc James Chapman <[email protected]>
Cc Tom Parkin <[email protected]>
Cc Johannes Berg <[email protected]>
---
 drivers/target/target_core_user.c |  2 +-
 include/net/genetlink.h           |  3 +--
 net/l2tp/l2tp_netlink.c           |  4 ++--
 net/netlink/genetlink.c           | 28 ++++++++++++++--------------
 net/wireless/nl80211.c            |  8 ++------
 5 files changed, 20 insertions(+), 25 deletions(-)
drivers/target/target_core_user.c +1 -1
index c283e45ac300b..2ac973291b1ff 100644
@@ -1988,7 +1988,7 @@ static int tcmu_netlink_event_send(struct tcmu_dev *udev,
 	}
 
 	ret = genlmsg_multicast_allns(&tcmu_genl_family, skb, 0,
-				      TCMU_MCGRP_CONFIG, GFP_KERNEL);
+				      TCMU_MCGRP_CONFIG);
 
 	/* Wait during an add as the listener may not be up yet */
 	if (ret == 0 ||
include/net/genetlink.h +1 -2
index 3057c8e6dcfe9..e00f617d4b6c8 100644
@@ -335,13 +335,12 @@ static inline int genlmsg_multicast(const struct genl_family *family,
  * @skb: netlink message as socket buffer
  * @portid: own netlink portid to avoid sending to yourself
  * @group: offset of multicast group in groups array
- * @flags: allocation flags
  *
  * This function must hold the RTNL or rcu_read_lock().
  */
 int genlmsg_multicast_allns(const struct genl_family *family,
 			    struct sk_buff *skb, u32 portid,
-			    unsigned int group, gfp_t flags);
+			    unsigned int group);
 
 /**
  * genlmsg_unicast - unicast a netlink message
net/l2tp/l2tp_netlink.c +2 -2
index 96eb91be9238b..f34ca225c2199 100644
@@ -115,7 +115,7 @@ static int l2tp_tunnel_notify(struct genl_family *family,
 				  NLM_F_ACK, tunnel, cmd);
 
 	if (ret >= 0) {
-		ret = genlmsg_multicast_allns(family, msg, 0, 0, GFP_ATOMIC);
+		ret = genlmsg_multicast_allns(family, msg, 0, 0);
 		/* We don't care if no one is listening */
 		if (ret == -ESRCH)
 			ret = 0;
@@ -143,7 +143,7 @@ static int l2tp_session_notify(struct genl_family *family,
 				   NLM_F_ACK, session, cmd);
 
 	if (ret >= 0) {
-		ret = genlmsg_multicast_allns(family, msg, 0, 0, GFP_ATOMIC);
+		ret = genlmsg_multicast_allns(family, msg, 0, 0);
 		/* We don't care if no one is listening */
 		if (ret == -ESRCH)
 			ret = 0;
net/netlink/genetlink.c +14 -14
index e9035de655467..e085ceec96a4c 100644
@@ -1097,15 +1097,11 @@ static int genl_ctrl_event(int event, const struct genl_family *family,
 	if (IS_ERR(msg))
 		return PTR_ERR(msg);
 
-	if (!family->netnsok) {
+	if (!family->netnsok)
 		genlmsg_multicast_netns(&genl_ctrl, &init_net, msg, 0,
 					0, GFP_KERNEL);
-	} else {
-		rcu_read_lock();
-		genlmsg_multicast_allns(&genl_ctrl, msg, 0,
-					0, GFP_ATOMIC);
-		rcu_read_unlock();
-	}
+	else
+		genlmsg_multicast_allns(&genl_ctrl, msg, 0, 0);
 
 	return 0;
 }
@@ -1449,23 +1445,23 @@ static int __init genl_init(void)
 
 core_initcall(genl_init);
 
-static int genlmsg_mcast(struct sk_buff *skb, u32 portid, unsigned long group,
-			 gfp_t flags)
+static int genlmsg_mcast(struct sk_buff *skb, u32 portid, unsigned long group)
 {
 	struct sk_buff *tmp;
 	struct net *net, *prev = NULL;
 	bool delivered = false;
 	int err;
 
+	rcu_read_lock();
 	for_each_net_rcu(net) {
 		if (prev) {
-			tmp = skb_clone(skb, flags);
+			tmp = skb_clone(skb, GFP_ATOMIC);
 			if (!tmp) {
 				err = -ENOMEM;
 				goto error;
 			}
 			err = nlmsg_multicast(prev->genl_sock, tmp,
-					      portid, group, flags);
+					      portid, group, GFP_ATOMIC);
 			if (!err)
 				delivered = true;
 			else if (err != -ESRCH)
@@ -1474,26 +1470,30 @@ static int genlmsg_mcast(struct sk_buff *skb, u32 portid, unsigned long group,
 
 		prev = net;
 	}
+	err = nlmsg_multicast(prev->genl_sock, skb, portid, group, GFP_ATOMIC);
+
+	rcu_read_unlock();
 
-	err = nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
 	if (!err)
 		delivered = true;
 	else if (err != -ESRCH)
 		return err;
 	return delivered ? 0 : -ESRCH;
  error:
+	rcu_read_unlock();
+
 	kfree_skb(skb);
 	return err;
 }
 
 int genlmsg_multicast_allns(const struct genl_family *family,
 			    struct sk_buff *skb, u32 portid,
-			    unsigned int group, gfp_t flags)
+			    unsigned int group)
 {
 	if (WARN_ON_ONCE(group >= family->n_mcgrps))
 		return -EINVAL;
 	group = family->mcgrp_offset + group;
-	return genlmsg_mcast(skb, portid, group, flags);
+	return genlmsg_mcast(skb, portid, group);
 }
 EXPORT_SYMBOL(genlmsg_multicast_allns);
 
net/wireless/nl80211.c +2 -6
index a989231198fe9..93b89f835e38b 100644
@@ -15874,10 +15874,8 @@ void nl80211_common_reg_change_event(enum nl80211_commands cmd_id,
 
 	genlmsg_end(msg, hdr);
 
-	rcu_read_lock();
 	genlmsg_multicast_allns(&nl80211_fam, msg, 0,
-				NL80211_MCGRP_REGULATORY, GFP_ATOMIC);
-	rcu_read_unlock();
+				NL80211_MCGRP_REGULATORY);
 
 	return;
 
@@ -16385,10 +16383,8 @@ void nl80211_send_beacon_hint_event(struct wiphy *wiphy,
 
 	genlmsg_end(msg, hdr);
 
-	rcu_read_lock();
 	genlmsg_multicast_allns(&nl80211_fam, msg, 0,
-				NL80211_MCGRP_REGULATORY, GFP_ATOMIC);
-	rcu_read_unlock();
+				NL80211_MCGRP_REGULATORY);
 
 	return;
 
Signature · 1 line
2.43.0
author maintainer
#14 lore raw

PATCH 14/110 scsi: target: core: Fix null-ptr-deref in target_alloc_device()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Hai <[email protected]>

[ Upstream commit fca6caeb4a61d240f031914413fcc69534f6dc03 ]

There is a null-ptr-deref issue reported by KASAN:

BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod]
...
 kasan_report+0xb9/0xf0
 target_alloc_device+0xbc4/0xbe0 [target_core_mod]
 core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod]
 target_core_init_configfs+0x205/0x420 [target_core_mod]
 do_one_initcall+0xdd/0x4e0

...
entry_SYSCALL_64_after_hwframe+0x76/0x7e

In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem.

Fixing this bug by freeing dev with hba->backend->ops->free_device().

---
 drivers/target/target_core_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/target/target_core_device.c +1 -1
index daa4d06ce2336..50135f8df1b4a 100644
@@ -727,7 +727,7 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
 
 	dev->queues = kcalloc(nr_cpu_ids, sizeof(*dev->queues), GFP_KERNEL);
 	if (!dev->queues) {
-		dev->transport->free_device(dev);
+		hba->backend->ops->free_device(dev);
 		return NULL;
 	}
 
Signature · 1 line
2.43.0
author maintainer
#15 lore raw

PATCH 15/110 smb: client: fix OOBs when building SMB2_IOCTL request

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paulo Alcantara <[email protected]>

[ Upstream commit 1ab60323c5201bef25f2a3dc0ccc404d9aca77f1 ]

When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command().

SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below:

  mount.cifs //srv/share /mnt -o ...,seal
  ln -s $(perl -e "print('a')for 1..1024") /mnt/link
  BUG: KASAN: slab-out-of-bounds in
  smb2_set_next_command.cold+0x1d6/0x24c [cifs]
  Write of size 4116 at addr ffff8881148fcab8 by task ln/859

  CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
  1.16.3-2.fc40 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x5d/0x80
   ? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
   print_report+0x156/0x4d9
   ? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
   ? __virt_addr_valid+0x145/0x310
   ? __phys_addr+0x46/0x90
   ? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
   kasan_report+0xda/0x110
   ? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
   kasan_check_range+0x10f/0x1f0
   __asan_memcpy+0x3c/0x60
   smb2_set_next_command.cold+0x1d6/0x24c [cifs]
   smb2_compound_op+0x238c/0x3840 [cifs]
   ? kasan_save_track+0x14/0x30
   ? kasan_save_free_info+0x3b/0x70
   ? vfs_symlink+0x1a1/0x2c0
   ? do_symlinkat+0x108/0x1c0
   ? __pfx_smb2_compound_op+0x10/0x10 [cifs]
   ? kmem_cache_free+0x118/0x3e0
   ? cifs_get_writable_path+0xeb/0x1a0 [cifs]
   smb2_get_reparse_inode+0x423/0x540 [cifs]
   ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs]
   ? rcu_is_watching+0x20/0x50
   ? __kmalloc_noprof+0x37c/0x480
   ? smb2_create_reparse_symlink+0x257/0x490 [cifs]
   ? smb2_create_reparse_symlink+0x38f/0x490 [cifs]
   smb2_create_reparse_symlink+0x38f/0x490 [cifs]
   ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs]
   ? find_held_lock+0x8a/0xa0
   ? hlock_class+0x32/0xb0
   ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs]
   cifs_symlink+0x24f/0x960 [cifs]
   ? __pfx_make_vfsuid+0x10/0x10
   ? __pfx_cifs_symlink+0x10/0x10 [cifs]
   ? make_vfsgid+0x6b/0xc0
   ? generic_permission+0x96/0x2d0
   vfs_symlink+0x1a1/0x2c0
   do_symlinkat+0x108/0x1c0
   ? __pfx_do_symlinkat+0x10/0x10
   ? strncpy_from_user+0xaa/0x160
   __x64_sys_symlinkat+0xb9/0xf0
   do_syscall_64+0xbb/0x1d0
   entry_SYSCALL_64_after_hwframe+0x77/0x7f
  RIP: 0033:0x7f08d75c13bb
Fixes e77fe73c7e38 ("cifs: we can not use small padding iovs together with encryption")
---
 fs/cifs/smb2pdu.c | 9 +++++++++
 1 file changed, 9 insertions(+)
fs/cifs/smb2pdu.c +9 -0
index aa3211d8cce3b..03651cc6b7a5b 100644
@@ -2961,6 +2961,15 @@ SMB2_ioctl_init(struct cifs_tcon *tcon, struct TCP_Server_Info *server,
 		return rc;
 
 	if (indatalen) {
+		unsigned int len;
+
+		if (WARN_ON_ONCE(smb3_encryption_required(tcon) &&
+				 (check_add_overflow(total_len - 1,
+						     ALIGN(indatalen, 8), &len) ||
+				  len > MAX_CIFS_SMALL_BUFFER_SIZE))) {
+			cifs_small_buf_release(req);
+			return -EIO;
+		}
 		/*
 		 * indatalen is usually small at a couple of bytes max, so
 		 * just allocate through generic pool
Signature · 1 line
2.43.0
author maintainer
#16 lore raw

PATCH 16/110 usb: typec: altmode should keep reference to parent

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thadeu Lima de Souza Cascardo <[email protected]>

[ Upstream commit befab3a278c59db0cc88c8799638064f6d3fd6f8 ]

The altmode device release refers to its parent device, but without keeping a reference to it.

When registering the altmode, get a reference to the parent and put it in the release function.

Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this:

[   43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000)
[   43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000)
[   43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000)
[   43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000)
[   43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000)
[   43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000)
[   43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000)
[   46.612867] ==================================================================
[   46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129
[   46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48
[   46.614538]
[   46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535
[   46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[   46.616042] Workqueue: events kobject_delayed_cleanup
[   46.616446] Call Trace:
[   46.616648]  <TASK>
[   46.616820]  dump_stack_lvl+0x5b/0x7c
[   46.617112]  ? typec_altmode_release+0x38/0x129
[   46.617470]  print_report+0x14c/0x49e
[   46.617769]  ? rcu_read_unlock_sched+0x56/0x69
[   46.618117]  ? __virt_addr_valid+0x19a/0x1ab
[   46.618456]  ? kmem_cache_debug_flags+0xc/0x1d
[   46.618807]  ? typec_altmode_release+0x38/0x129
[   46.619161]  kasan_report+0x8d/0xb4
[   46.619447]  ? typec_altmode_release+0x38/0x129
[   46.619809]  ? process_scheduled_works+0x3cb/0x85f
[   46.620185]  typec_altmode_release+0x38/0x129
[   46.620537]  ? process_scheduled_works+0x3cb/0x85f
[   46.620907]  device_release+0xaf/0xf2
[   46.621206]  kobject_delayed_cleanup+0x13b/0x17a
[   46.621584]  process_scheduled_works+0x4f6/0x85f
[   46.621955]  ? __pfx_process_scheduled_works+0x10/0x10
[   46.622353]  ? hlock_class+0x31/0x9a
[   46.622647]  ? lock_acquired+0x361/0x3c3
[   46.622956]  ? move_linked_works+0x46/0x7d
[   46.623277]  worker_thread+0x1ce/0x291
[   46.623582]  ? __kthread_parkme+0xc8/0xdf
[   46.623900]  ? __pfx_worker_thread+0x10/0x10
[   46.624236]  kthread+0x17e/0x190
[   46.624501]  ? kthread+0xfb/0x190
[   46.624756]  ? __pfx_kthread+0x10/0x10
[   46.625015]  ret_from_fork+0x20/0x40
[   46.625268]  ? __pfx_kthread+0x10/0x10
[   46.625532]  ret_from_fork_asm+0x1a/0x30
[   46.625805]  </TASK>
[   46.625953]
[   46.626056] Allocated by task 678:
[   46.626287]  kasan_save_stack+0x24/0x44
[   46.626555]  kasan_save_track+0x14/0x2d
[   46.626811]  __kasan_kmalloc+0x3f/0x4d
[   46.627049]  __kmalloc_noprof+0x1bf/0x1f0
[   46.627362]  typec_register_port+0x23/0x491
[   46.627698]  cros_typec_probe+0x634/0xbb6
[   46.628026]  platform_probe+0x47/0x8c
[   46.628311]  really_probe+0x20a/0x47d
[   46.628605]  device_driver_attach+0x39/0x72
[   46.628940]  bind_store+0x87/0xd7
[   46.629213]  kernfs_fop_write_iter+0x1aa/0x218
[   46.629574]  vfs_write+0x1d6/0x29b
[   46.629856]  ksys_write+0xcd/0x13b
[   46.630128]  do_syscall_64+0xd4/0x139
[   46.630420]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[   46.630820]
[   46.630946] Freed by task 48:
[   46.631182]  kasan_save_stack+0x24/0x44
[   46.631493]  kasan_save_track+0x14/0x2d
[   46.631799]  kasan_save_free_info+0x3f/0x4d
[   46.632144]  __kasan_slab_free+0x37/0x45
[   46.632474]  kfree+0x1d4/0x252
[   46.632725]  device_release+0xaf/0xf2
[   46.633017]  kobject_delayed_cleanup+0x13b/0x17a
[   46.633388]  process_scheduled_works+0x4f6/0x85f
[   46.633764]  worker_thread+0x1ce/0x291
[   46.634065]  kthread+0x17e/0x190
[   46.634324]  ret_from_fork+0x20/0x40
[   46.634621]  ret_from_fork_asm+0x1a/0x30
---
 drivers/usb/typec/class.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/usb/typec/class.c +3 -0
index 7fa95e7012446..dec83edb09de2 100644
@@ -430,6 +430,7 @@ static void typec_altmode_release(struct device *dev)
 		typec_altmode_put_partner(alt);
 
 	altmode_id_remove(alt->adev.dev.parent, alt->id);
+	put_device(alt->adev.dev.parent);
 	kfree(alt);
 }
 
@@ -479,6 +480,8 @@ typec_register_altmode(struct device *parent,
 	alt->adev.dev.type = &typec_altmode_dev_type;
 	dev_set_name(&alt->adev.dev, "%s.%u", dev_name(parent), id);
 
+	get_device(alt->adev.dev.parent);
+
 	/* Link partners and plugs with the ports */
 	if (!is_port)
 		typec_altmode_set_partner(alt);
Signature · 1 line
2.43.0
author maintainer
#17 lore raw

PATCH 17/110 s390: Initialize psw mask in perf_arch_fetch_caller_regs()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <[email protected]>

[ Upstream commit 223e7fb979fa06934f1595b6ad0ae1d4ead1147f ]

Also initialize regs->psw.mask in perf_arch_fetch_caller_regs(). This way user_mode(regs) will return false, like it should.

It looks like all current users initialize regs to zero, so that this doesn't fix a bug currently. However it is better to not rely on callers to do this.

Fixes 914d52e46490 ("s390: implement perf_arch_fetch_caller_regs")
---
 arch/s390/include/asm/perf_event.h | 1 +
 1 file changed, 1 insertion(+)
arch/s390/include/asm/perf_event.h +1 -0
index b9da71632827f..ea340b9018398 100644
@@ -75,6 +75,7 @@ struct perf_sf_sde_regs {
 #define SAMPLE_FREQ_MODE(hwc)	(SAMPL_FLAGS(hwc) & PERF_CPUM_SF_FREQ_MODE)
 
 #define perf_arch_fetch_caller_regs(regs, __ip) do {			\
+	(regs)->psw.mask = 0;						\
 	(regs)->psw.addr = (__ip);					\
 	(regs)->gprs[15] = (unsigned long)__builtin_frame_address(0) -	\
 		offsetof(struct stack_frame, back_chain);		\
Signature · 1 line
2.43.0
author maintainer
#18 lore raw

PATCH 18/110 Bluetooth: bnep: fix wild-memory-access in proto_unregister

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ye Bin <[email protected]>

[ Upstream commit 64a90991ba8d4e32e3173ddd83d0b24167a5668c ]

There's issue as follows:

  KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
  CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G        W
  RIP: 0010:proto_unregister+0xee/0x400
  Call Trace:
   <TASK>
   __do_sys_delete_module+0x318/0x580
   do_syscall_64+0xc1/0x1d0
   entry_SYSCALL_64_after_hwframe+0x77/0x7f

As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init() will cleanup all resource. Then when remove bnep module will call bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in bnep_exit().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/bluetooth/bnep/core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
net/bluetooth/bnep/core.c +1 -2
index f749904272961..0eaa47ae6e993 100644
@@ -745,8 +745,7 @@ static int __init bnep_init(void)
 	if (flt[0])
 		BT_INFO("BNEP filters: %s", flt);
 
-	bnep_sock_init();
-	return 0;
+	return bnep_sock_init();
 }
 
 static void __exit bnep_exit(void)
Signature · 1 line
2.43.0
author maintainer
#19 lore raw

PATCH 19/110 arm64:uprobe fix the uprobe SWBP_INSN in big-endian

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: junhua huang <[email protected]>

[ Upstream commit 60f07e22a73d318cddaafa5ef41a10476807cc07 ]

We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace.
We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。

The test case is as following。
bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/
bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable
bash-4.4#
bash-4.4# ps
PID TTY TIME CMD
140 ? 00:00:01 bash
237 ? 00:00:00 ps
[1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null

which we debug use gdb as following:

bash-4.4# gdb attach 155
(gdb) disassemble send
Dump of assembler code for function send:

   0x0000000000400c30 <+0>:     .inst   0xa00020d4 ; undefined
   0x0000000000400c34 <+4>:     mov     x29, sp
   0x0000000000400c38 <+8>:     str     w0, [sp, #28]
   0x0000000000400c3c <+12>:    strb    w1, [sp, #27]
   0x0000000000400c40 <+16>:    str     xzr, [sp, #40]
   0x0000000000400c44 <+20>:    str     xzr, [sp, #48]
   0x0000000000400c48 <+24>:    add     x0, sp, #0x1b
   0x0000000000400c4c <+28>:    mov     w3, #0x0                 // #0
   0x0000000000400c50 <+32>:    mov     x2, #0x1                 // #1
   0x0000000000400c54 <+36>:    mov     x1, x0
   0x0000000000400c58 <+40>:    ldr     w0, [sp, #28]
   0x0000000000400c5c <+44>:    bl      0x405e10 <mq_send>
   0x0000000000400c60 <+48>:    str     w0, [sp, #60]
   0x0000000000400c64 <+52>:    ldr     w0, [sp, #60]
   0x0000000000400c68 <+56>:    ldp     x29, x30, [sp], #64
   0x0000000000400c6c <+60>:    ret

End of assembler dump.
(gdb) info b
No breakpoints or watchpoints.
(gdb) c
Continuing.

Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send ()
(gdb) x/10x 0x400c30

0x400c30 <send>:    0xd42000a0   0xfd030091      0xe01f00b9      0xe16f0039
0x400c40 <send+16>: 0xff1700f9   0xff1b00f9      0xe06f0091      0x03008052
0x400c50 <send+32>: 0x220080d2   0xe10300aa
(gdb) disassemble 0x400c30
Dump of assembler code for function send:
=> 0x0000000000400c30 <+0>:     .inst   0xa00020d4 ; undefined
   0x0000000000400c34 <+4>:     mov     x29, sp
   0x0000000000400c38 <+8>:     str     w0, [sp, #28]
   0x0000000000400c3c <+12>:    strb    w1, [sp, #27]
   0x0000000000400c40 <+16>:    str     xzr, [sp, #40]

Stable-dep-of: 13f8f1e05f1d ("arm64: probes: Fix uprobes for big-endian kernels")

---
 arch/arm64/include/asm/uprobes.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/include/asm/uprobes.h +1 -1
index 315eef654e39a..ba4bff5ca6749 100644
@@ -12,7 +12,7 @@
 
 #define MAX_UINSN_BYTES		AARCH64_INSN_SIZE
 
-#define UPROBE_SWBP_INSN	BRK64_OPCODE_UPROBES
+#define UPROBE_SWBP_INSN	cpu_to_le32(BRK64_OPCODE_UPROBES)
 #define UPROBE_SWBP_INSN_SIZE	AARCH64_INSN_SIZE
 #define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
 
Signature · 1 line
2.43.0
author maintainer
#20 lore raw

PATCH 20/110 arm64: probes: Fix uprobes for big-endian kernels

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Rutland <[email protected]>

[ Upstream commit 13f8f1e05f1dc36dbba6cba0ae03354c0dafcde7 ]

The arm64 uprobes code is broken for big-endian kernels as it doesn't convert the in-memory instruction encoding (which is always little-endian) into the kernel's native endianness before analyzing and simulating instructions. This may result in a few distinct problems:

* The kernel may may erroneously reject probing an instruction which can safely be probed.

* The kernel may erroneously erroneously permit stepping an instruction out-of-line when that instruction cannot be stepped out-of-line safely.

* The kernel may erroneously simulate instruction incorrectly dur to interpretting the byte-swapped encoding.

The endianness mismatch isn't caught by the compiler or sparse because:

* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so the compiler and sparse have no idea these contain a little-endian 32-bit value. The core uprobes code populates these with a memcpy() which similarly does not handle endianness.

* While the uprobe_opcode_t type is an alias for __le32, both arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[] to the similarly-named probe_opcode_t, which is an alias for u32. Hence there is no endianness conversion warning.

Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and adding the appropriate __le32_to_cpu() conversions prior to consuming the instruction encoding. The core uprobes copies these fields as opaque ranges of bytes, and so is unaffected by this change.

At the same time, remove MAX_UINSN_BYTES and consistently use AARCH64_INSN_SIZE for clarity.

Tested with the following:

| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
|         void *addr;
|
|         asm volatile(
|         "       adrp    %x0, adrp_self\n"
|         "       add     %x0, %x0, :lo12:adrp_self\n"
|         : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
|         void *ptr = adrp_self();
|         bool equal = (ptr == adrp_self);
|
|         printf("adrp_self   => %p\n"
|                "adrp_self() => %p\n"
|                "%s\n",
|                adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
|         return 0;
| }

.... where the adrp_self() function was compiled to:

| 00000000004007e0 <adrp_self>:
|   4007e0:       90000000        adrp    x0, 400000 <__ehdr_start>
|   4007e4:       911f8000        add     x0, x0, #0x7e0
|   4007e8:       d65f03c0        ret

Before this patch, the ADRP is not recognized, and is assumed to be steppable, resulting in corruption of the result:

| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL

After this patch, the ADRP is correctly recognized and simulated:

| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes 9842ceae9fa8 ("arm64: Add uprobe support")
Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
---
 arch/arm64/include/asm/uprobes.h   | 8 +++-----
 arch/arm64/kernel/probes/uprobes.c | 4 ++--
 2 files changed, 5 insertions(+), 7 deletions(-)
arch/arm64/include/asm/uprobes.h +3 -5
index ba4bff5ca6749..98f29a43bfe89 100644
@@ -10,11 +10,9 @@
 #include <asm/insn.h>
 #include <asm/probes.h>
 
-#define MAX_UINSN_BYTES		AARCH64_INSN_SIZE
-
 #define UPROBE_SWBP_INSN	cpu_to_le32(BRK64_OPCODE_UPROBES)
 #define UPROBE_SWBP_INSN_SIZE	AARCH64_INSN_SIZE
-#define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
+#define UPROBE_XOL_SLOT_BYTES	AARCH64_INSN_SIZE
 
 typedef u32 uprobe_opcode_t;
 
@@ -23,8 +21,8 @@ struct arch_uprobe_task {
 
 struct arch_uprobe {
 	union {
-		u8 insn[MAX_UINSN_BYTES];
-		u8 ixol[MAX_UINSN_BYTES];
+		__le32 insn;
+		__le32 ixol;
 	};
 	struct arch_probe_insn api;
 	bool simulate;
arch/arm64/kernel/probes/uprobes.c +2 -2
index 2c247634552b1..8a02c549e57fd 100644
@@ -42,7 +42,7 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
 	else if (!IS_ALIGNED(addr, AARCH64_INSN_SIZE))
 		return -EINVAL;
 
-	insn = *(probe_opcode_t *)(&auprobe->insn[0]);
+	insn = le32_to_cpu(auprobe->insn);
 
 	switch (arm_probe_decode_insn(insn, &auprobe->api)) {
 	case INSN_REJECTED:
@@ -108,7 +108,7 @@ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
 	if (!auprobe->simulate)
 		return false;
 
-	insn = *(probe_opcode_t *)(&auprobe->insn[0]);
+	insn = le32_to_cpu(auprobe->insn);
 	addr = instruction_pointer(regs);
 
 	if (auprobe->api.handler)
Signature · 1 line
2.43.0
author maintainer
#21 lore raw

PATCH 21/110 KVM: s390: gaccess: Refactor gpa and length calculation

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Janis Schoetterl-Glausch <[email protected]>

[ Upstream commit 416e7f0c9d613bf84e182eba9547ae8f9f5bfa4c ]

Improve readability by renaming the length variable and not calculating the offset manually.

Message-Id: <[email protected]>

Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot")

---
 arch/s390/kvm/gaccess.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
arch/s390/kvm/gaccess.c +17 -15
index b9f85b2dc053f..9f80d95a43770 100644
@@ -831,8 +831,9 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, void *data,
 		 unsigned long len, enum gacc_mode mode)
 {
 	psw_t *psw = &vcpu->arch.sie_block->gpsw;
-	unsigned long _len, nr_pages, gpa, idx;
+	unsigned long nr_pages, gpa, idx;
 	unsigned long pages_array[2];
+	unsigned int fragment_len;
 	unsigned long *pages;
 	int need_ipte_lock;
 	union asce asce;
@@ -855,15 +856,15 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, void *data,
 		ipte_lock(vcpu);
 	rc = guest_page_range(vcpu, ga, ar, pages, nr_pages, asce, mode);
 	for (idx = 0; idx < nr_pages && !rc; idx++) {
-		gpa = *(pages + idx) + (ga & ~PAGE_MASK);
-		_len = min(PAGE_SIZE - (gpa & ~PAGE_MASK), len);
+		gpa = pages[idx] + offset_in_page(ga);
+		fragment_len = min(PAGE_SIZE - offset_in_page(gpa), len);
 		if (mode == GACC_STORE)
-			rc = kvm_write_guest(vcpu->kvm, gpa, data, _len);
+			rc = kvm_write_guest(vcpu->kvm, gpa, data, fragment_len);
 		else
-			rc = kvm_read_guest(vcpu->kvm, gpa, data, _len);
-		len -= _len;
-		ga += _len;
-		data += _len;
+			rc = kvm_read_guest(vcpu->kvm, gpa, data, fragment_len);
+		len -= fragment_len;
+		ga += fragment_len;
+		data += fragment_len;
 	}
 	if (need_ipte_lock)
 		ipte_unlock(vcpu);
@@ -875,19 +876,20 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, void *data,
 int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
 		      void *data, unsigned long len, enum gacc_mode mode)
 {
-	unsigned long _len, gpa;
+	unsigned int fragment_len;
+	unsigned long gpa;
 	int rc = 0;
 
 	while (len && !rc) {
 		gpa = kvm_s390_real_to_abs(vcpu, gra);
-		_len = min(PAGE_SIZE - (gpa & ~PAGE_MASK), len);
+		fragment_len = min(PAGE_SIZE - offset_in_page(gpa), len);
 		if (mode)
-			rc = write_guest_abs(vcpu, gpa, data, _len);
+			rc = write_guest_abs(vcpu, gpa, data, fragment_len);
 		else
-			rc = read_guest_abs(vcpu, gpa, data, _len);
-		len -= _len;
-		gra += _len;
-		data += _len;
+			rc = read_guest_abs(vcpu, gpa, data, fragment_len);
+		len -= fragment_len;
+		gra += fragment_len;
+		data += fragment_len;
 	}
 	return rc;
 }
Signature · 1 line
2.43.0
author maintainer
#22 lore raw

PATCH 22/110 KVM: s390: gaccess: Refactor access address range check

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Janis Schoetterl-Glausch <[email protected]>

[ Upstream commit 7faa543df19bf62d4583a64d3902705747f2ad29 ]

Do not round down the first address to the page boundary, just translate it normally, which gives the value we care about in the first place. Given this, translating a single address is just the special case of translating a range spanning a single page.

Make the output optional, so the function can be used to just check a range.

Message-Id: <[email protected]>

Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot")

---
 arch/s390/kvm/gaccess.c | 122 +++++++++++++++++++++++-----------------
 1 file changed, 69 insertions(+), 53 deletions(-)
arch/s390/kvm/gaccess.c +69 -53
index 9f80d95a43770..9b9bfc333e62d 100644
@@ -794,35 +794,74 @@ static int low_address_protection_enabled(struct kvm_vcpu *vcpu,
 	return 1;
 }
 
-static int guest_page_range(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar,
-			    unsigned long *pages, unsigned long nr_pages,
-			    const union asce asce, enum gacc_mode mode)
+/**
+ * guest_range_to_gpas() - Calculate guest physical addresses of page fragments
+ * covering a logical range
+ * @vcpu: virtual cpu
+ * @ga: guest address, start of range
+ * @ar: access register
+ * @gpas: output argument, may be NULL
+ * @len: length of range in bytes
+ * @asce: address-space-control element to use for translation
+ * @mode: access mode
+ *
+ * Translate a logical range to a series of guest absolute addresses,
+ * such that the concatenation of page fragments starting at each gpa make up
+ * the whole range.
+ * The translation is performed as if done by the cpu for the given @asce, @ar,
+ * @mode and state of the @vcpu.
+ * If the translation causes an exception, its program interruption code is
+ * returned and the &struct kvm_s390_pgm_info pgm member of @vcpu is modified
+ * such that a subsequent call to kvm_s390_inject_prog_vcpu() will inject
+ * a correct exception into the guest.
+ * The resulting gpas are stored into @gpas, unless it is NULL.
+ *
+ * Note: All fragments except the first one start at the beginning of a page.
+ *	 When deriving the boundaries of a fragment from a gpa, all but the last
+ *	 fragment end at the end of the page.
+ *
+ * Return:
+ * * 0		- success
+ * * <0		- translation could not be performed, for example if  guest
+ *		  memory could not be accessed
+ * * >0		- an access exception occurred. In this case the returned value
+ *		  is the program interruption code and the contents of pgm may
+ *		  be used to inject an exception into the guest.
+ */
+static int guest_range_to_gpas(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar,
+			       unsigned long *gpas, unsigned long len,
+			       const union asce asce, enum gacc_mode mode)
 {
 	psw_t *psw = &vcpu->arch.sie_block->gpsw;
+	unsigned int offset = offset_in_page(ga);
+	unsigned int fragment_len;
 	int lap_enabled, rc = 0;
 	enum prot_type prot;
+	unsigned long gpa;
 
 	lap_enabled = low_address_protection_enabled(vcpu, asce);
-	while (nr_pages) {
+	while (min(PAGE_SIZE - offset, len) > 0) {
+		fragment_len = min(PAGE_SIZE - offset, len);
 		ga = kvm_s390_logical_to_effective(vcpu, ga);
 		if (mode == GACC_STORE && lap_enabled && is_low_address(ga))
 			return trans_exc(vcpu, PGM_PROTECTION, ga, ar, mode,
 					 PROT_TYPE_LA);
-		ga &= PAGE_MASK;
 		if (psw_bits(*psw).dat) {
-			rc = guest_translate(vcpu, ga, pages, asce, mode, &prot);
+			rc = guest_translate(vcpu, ga, &gpa, asce, mode, &prot);
 			if (rc < 0)
 				return rc;
 		} else {
-			*pages = kvm_s390_real_to_abs(vcpu, ga);
-			if (kvm_is_error_gpa(vcpu->kvm, *pages))
+			gpa = kvm_s390_real_to_abs(vcpu, ga);
+			if (kvm_is_error_gpa(vcpu->kvm, gpa))
 				rc = PGM_ADDRESSING;
 		}
 		if (rc)
 			return trans_exc(vcpu, rc, ga, ar, mode, prot);
-		ga += PAGE_SIZE;
-		pages++;
-		nr_pages--;
+		if (gpas)
+			*gpas++ = gpa;
+		offset = 0;
+		ga += fragment_len;
+		len -= fragment_len;
 	}
 	return 0;
 }
@@ -831,10 +870,10 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, void *data,
 		 unsigned long len, enum gacc_mode mode)
 {
 	psw_t *psw = &vcpu->arch.sie_block->gpsw;
-	unsigned long nr_pages, gpa, idx;
-	unsigned long pages_array[2];
+	unsigned long nr_pages, idx;
+	unsigned long gpa_array[2];
 	unsigned int fragment_len;
-	unsigned long *pages;
+	unsigned long *gpas;
 	int need_ipte_lock;
 	union asce asce;
 	int rc;
@@ -846,30 +885,28 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, void *data,
 	if (rc)
 		return rc;
 	nr_pages = (((ga & ~PAGE_MASK) + len - 1) >> PAGE_SHIFT) + 1;
-	pages = pages_array;
-	if (nr_pages > ARRAY_SIZE(pages_array))
-		pages = vmalloc(array_size(nr_pages, sizeof(unsigned long)));
-	if (!pages)
+	gpas = gpa_array;
+	if (nr_pages > ARRAY_SIZE(gpa_array))
+		gpas = vmalloc(array_size(nr_pages, sizeof(unsigned long)));
+	if (!gpas)
 		return -ENOMEM;
 	need_ipte_lock = psw_bits(*psw).dat && !asce.r;
 	if (need_ipte_lock)
 		ipte_lock(vcpu);
-	rc = guest_page_range(vcpu, ga, ar, pages, nr_pages, asce, mode);
+	rc = guest_range_to_gpas(vcpu, ga, ar, gpas, len, asce, mode);
 	for (idx = 0; idx < nr_pages && !rc; idx++) {
-		gpa = pages[idx] + offset_in_page(ga);
-		fragment_len = min(PAGE_SIZE - offset_in_page(gpa), len);
+		fragment_len = min(PAGE_SIZE - offset_in_page(gpas[idx]), len);
 		if (mode == GACC_STORE)
-			rc = kvm_write_guest(vcpu->kvm, gpa, data, fragment_len);
+			rc = kvm_write_guest(vcpu->kvm, gpas[idx], data, fragment_len);
 		else
-			rc = kvm_read_guest(vcpu->kvm, gpa, data, fragment_len);
+			rc = kvm_read_guest(vcpu->kvm, gpas[idx], data, fragment_len);
 		len -= fragment_len;
-		ga += fragment_len;
 		data += fragment_len;
 	}
 	if (need_ipte_lock)
 		ipte_unlock(vcpu);
-	if (nr_pages > ARRAY_SIZE(pages_array))
-		vfree(pages);
+	if (nr_pages > ARRAY_SIZE(gpa_array))
+		vfree(gpas);
 	return rc;
 }
 
@@ -906,8 +943,6 @@ int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
 int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, u8 ar,
 			    unsigned long *gpa, enum gacc_mode mode)
 {
-	psw_t *psw = &vcpu->arch.sie_block->gpsw;
-	enum prot_type prot;
 	union asce asce;
 	int rc;
 
@@ -915,23 +950,7 @@ int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, u8 ar,
 	rc = get_vcpu_asce(vcpu, &asce, gva, ar, mode);
 	if (rc)
 		return rc;
-	if (is_low_address(gva) && low_address_protection_enabled(vcpu, asce)) {
-		if (mode == GACC_STORE)
-			return trans_exc(vcpu, PGM_PROTECTION, gva, 0,
-					 mode, PROT_TYPE_LA);
-	}
-
-	if (psw_bits(*psw).dat && !asce.r) {	/* Use DAT? */
-		rc = guest_translate(vcpu, gva, gpa, asce, mode, &prot);
-		if (rc > 0)
-			return trans_exc(vcpu, rc, gva, 0, mode, prot);
-	} else {
-		*gpa = kvm_s390_real_to_abs(vcpu, gva);
-		if (kvm_is_error_gpa(vcpu->kvm, *gpa))
-			return trans_exc(vcpu, rc, gva, PGM_ADDRESSING, mode, 0);
-	}
-
-	return rc;
+	return guest_range_to_gpas(vcpu, gva, ar, gpa, 1, asce, mode);
 }
 
 /**
@@ -940,17 +959,14 @@ int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, u8 ar,
 int check_gva_range(struct kvm_vcpu *vcpu, unsigned long gva, u8 ar,
 		    unsigned long length, enum gacc_mode mode)
 {
-	unsigned long gpa;
-	unsigned long currlen;
+	union asce asce;
 	int rc = 0;
 
+	rc = get_vcpu_asce(vcpu, &asce, gva, ar, mode);
+	if (rc)
+		return rc;
 	ipte_lock(vcpu);
-	while (length > 0 && !rc) {
-		currlen = min(length, PAGE_SIZE - (gva % PAGE_SIZE));
-		rc = guest_translate_address(vcpu, gva, ar, &gpa, mode);
-		gva += currlen;
-		length -= currlen;
-	}
+	rc = guest_range_to_gpas(vcpu, gva, ar, NULL, length, asce, mode);
 	ipte_unlock(vcpu);
 
 	return rc;
Signature · 1 line
2.43.0
author maintainer
#23 lore raw

PATCH 23/110 KVM: s390: gaccess: Cleanup access to guest pages

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Janis Schoetterl-Glausch <[email protected]>

[ Upstream commit bad13799e0305deb258372b7298a86be4c78aaba ]

Introduce a helper function for guest frame access.

Message-Id: <[email protected]>

Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot")

---
 arch/s390/kvm/gaccess.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
arch/s390/kvm/gaccess.c +16 -8
index 9b9bfc333e62d..164f96ba61dd2 100644
@@ -866,6 +866,20 @@ static int guest_range_to_gpas(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar,
 	return 0;
 }
 
+static int access_guest_page(struct kvm *kvm, enum gacc_mode mode, gpa_t gpa,
+			     void *data, unsigned int len)
+{
+	const unsigned int offset = offset_in_page(gpa);
+	const gfn_t gfn = gpa_to_gfn(gpa);
+	int rc;
+
+	if (mode == GACC_STORE)
+		rc = kvm_write_guest_page(kvm, gfn, data, offset, len);
+	else
+		rc = kvm_read_guest_page(kvm, gfn, data, offset, len);
+	return rc;
+}
+
 int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, void *data,
 		 unsigned long len, enum gacc_mode mode)
 {
@@ -896,10 +910,7 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, u8 ar, void *data,
 	rc = guest_range_to_gpas(vcpu, ga, ar, gpas, len, asce, mode);
 	for (idx = 0; idx < nr_pages && !rc; idx++) {
 		fragment_len = min(PAGE_SIZE - offset_in_page(gpas[idx]), len);
-		if (mode == GACC_STORE)
-			rc = kvm_write_guest(vcpu->kvm, gpas[idx], data, fragment_len);
-		else
-			rc = kvm_read_guest(vcpu->kvm, gpas[idx], data, fragment_len);
+		rc = access_guest_page(vcpu->kvm, mode, gpas[idx], data, fragment_len);
 		len -= fragment_len;
 		data += fragment_len;
 	}
@@ -920,10 +931,7 @@ int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
 	while (len && !rc) {
 		gpa = kvm_s390_real_to_abs(vcpu, gra);
 		fragment_len = min(PAGE_SIZE - offset_in_page(gpa), len);
-		if (mode)
-			rc = write_guest_abs(vcpu, gpa, data, fragment_len);
-		else
-			rc = read_guest_abs(vcpu, gpa, data, fragment_len);
+		rc = access_guest_page(vcpu->kvm, mode, gpa, data, fragment_len);
 		len -= fragment_len;
 		gra += fragment_len;
 		data += fragment_len;
Signature · 1 line
2.43.0
author maintainer
#24 lore raw

PATCH 24/110 KVM: s390: gaccess: Check if guest address is in memslot

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nico Boehr <[email protected]>

[ Upstream commit e8061f06185be0a06a73760d6526b8b0feadfe52 ]

Previously, access_guest_page() did not check whether the given guest address is inside of a memslot. This is not a problem, since kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case.

However, -EFAULT is also returned when copy_to/from_user fails.

When emulating a guest instruction, the address being outside a memslot usually means that an addressing exception should be injected into the guest.

Failure in copy_to/from_user however indicates that something is wrong in userspace and hence should be handled there.

To be able to distinguish these two cases, return PGM_ADDRESSING in access_guest_page() when the guest address is outside guest memory. In access_guest_real(), populate vcpu->arch.pgm.code such that kvm_s390_inject_prog_cond() can be used in the caller for injecting into the guest (if applicable).

Since this adds a new return value to access_guest_page(), we need to make sure that other callers are not confused by the new positive return value.

There are the following users of access_guest_page():
- access_guest_with_key() does the checking itself (in guest_range_to_gpas()), so this case should never happen. Even if, the handling is set up properly.
- access_guest_real() just passes the return code to its callers, which are:
- read_guest_real() - see below
- write_guest_real() - see below

There are the following users of read_guest_real():
- ar_translation() in gaccess.c which already returns PGM_*
- setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always return -EFAULT on read_guest_read() nonzero return - no change
- shadow_crycb(), handle_stfle() always present this as validity, this could be handled better but doesn't change current behaviour - no change

There are the following users of write_guest_real():
- kvm_s390_store_status_unloaded() always returns -EFAULT on write_guest_real() failure.

---
 arch/s390/kvm/gaccess.c |  4 ++++
 arch/s390/kvm/gaccess.h | 14 ++++++++------
 2 files changed, 12 insertions(+), 6 deletions(-)
arch/s390/kvm/gaccess.c +4 -0
index 164f96ba61dd2..5a880e2545243 100644
@@ -873,6 +873,8 @@ static int access_guest_page(struct kvm *kvm, enum gacc_mode mode, gpa_t gpa,
 	const gfn_t gfn = gpa_to_gfn(gpa);
 	int rc;
 
+	if (!gfn_to_memslot(kvm, gfn))
+		return PGM_ADDRESSING;
 	if (mode == GACC_STORE)
 		rc = kvm_write_guest_page(kvm, gfn, data, offset, len);
 	else
@@ -936,6 +938,8 @@ int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
 		gra += fragment_len;
 		data += fragment_len;
 	}
+	if (rc > 0)
+		vcpu->arch.pgm.code = rc;
 	return rc;
 }
 
arch/s390/kvm/gaccess.h +8 -6
index 7c72a5e3449f8..8ed2d6c7404ff 100644
@@ -344,11 +344,12 @@ int read_guest_abs(struct kvm_vcpu *vcpu, unsigned long gpa, void *data,
  * @len: number of bytes to copy
  *
  * Copy @len bytes from @data (kernel space) to @gra (guest real address).
- * It is up to the caller to ensure that the entire guest memory range is
- * valid memory before calling this function.
  * Guest low address and key protection are not checked.
  *
- * Returns zero on success or -EFAULT on error.
+ * Returns zero on success, -EFAULT when copying from @data failed, or
+ * PGM_ADRESSING in case @gra is outside a memslot. In this case, pgm check info
+ * is also stored to allow injecting into the guest (if applicable) using
+ * kvm_s390_inject_prog_cond().
  *
  * If an error occurs data may have been copied partially to guest memory.
  */
@@ -367,11 +368,12 @@ int write_guest_real(struct kvm_vcpu *vcpu, unsigned long gra, void *data,
  * @len: number of bytes to copy
  *
  * Copy @len bytes from @gra (guest real address) to @data (kernel space).
- * It is up to the caller to ensure that the entire guest memory range is
- * valid memory before calling this function.
  * Guest key protection is not checked.
  *
- * Returns zero on success or -EFAULT on error.
+ * Returns zero on success, -EFAULT when copying to @data failed, or
+ * PGM_ADRESSING in case @gra is outside a memslot. In this case, pgm check info
+ * is also stored to allow injecting into the guest (if applicable) using
+ * kvm_s390_inject_prog_cond().
  *
  * If an error occurs data may have been copied partially to kernel space.
  */
Signature · 1 line
2.43.0
author maintainer
#25 lore raw

PATCH 25/110 block, bfq: fix procress reference leakage for bfqq in merge chain

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yu Kuai <[email protected]>

[ Upstream commit 73aeab373557fa6ee4ae0b742c6211ccd9859280 ]

Original state:

Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4

After commit 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()"), if P1 issues a new IO:

Without the patch:

Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\------------------------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4

bfqq3 will be used to handle IO from P1, this is not expected, IO should be redirected to bfqq4;

With the patch:

-------------------------------------------
| |
Process 1 Process 2 Process 3 | Process 4
(BIC1) (BIC2) (BIC3) | (BIC4)
| | | |
\-------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4

IO is redirected to bfqq4, however, procress reference of bfqq3 is still 2, while there is only P2 using it.

Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify code.

Fixes 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
---
 block/bfq-iosched.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)
block/bfq-iosched.c +16 -17
index 515e3c1a54759..c1600e3ac3339 100644
@@ -2774,10 +2774,12 @@ void bfq_release_process_ref(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 	bfq_put_queue(bfqq);
 }
 
-static void
-bfq_merge_bfqqs(struct bfq_data *bfqd, struct bfq_io_cq *bic,
-		struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
+static struct bfq_queue *bfq_merge_bfqqs(struct bfq_data *bfqd,
+					 struct bfq_io_cq *bic,
+					 struct bfq_queue *bfqq)
 {
+	struct bfq_queue *new_bfqq = bfqq->new_bfqq;
+
 	bfq_log_bfqq(bfqd, bfqq, "merging with queue %lu",
 		(unsigned long)new_bfqq->pid);
 	/* Save weight raising and idle window of the merged queues */
@@ -2845,6 +2847,8 @@ bfq_merge_bfqqs(struct bfq_data *bfqd, struct bfq_io_cq *bic,
 	new_bfqq->pid = -1;
 	bfqq->bic = NULL;
 	bfq_release_process_ref(bfqd, bfqq);
+
+	return new_bfqq;
 }
 
 static bool bfq_allow_bio_merge(struct request_queue *q, struct request *rq,
@@ -2880,14 +2884,8 @@ static bool bfq_allow_bio_merge(struct request_queue *q, struct request *rq,
 		 * fulfilled, i.e., bic can be redirected to new_bfqq
 		 * and bfqq can be put.
 		 */
-		bfq_merge_bfqqs(bfqd, bfqd->bio_bic, bfqq,
-				new_bfqq);
-		/*
-		 * If we get here, bio will be queued into new_queue,
-		 * so use new_bfqq to decide whether bio and rq can be
-		 * merged.
-		 */
-		bfqq = new_bfqq;
+		while (bfqq != new_bfqq)
+			bfqq = bfq_merge_bfqqs(bfqd, bfqd->bio_bic, bfqq);
 
 		/*
 		 * Change also bqfd->bio_bfqq, as
@@ -5444,6 +5442,7 @@ static bool __bfq_insert_request(struct bfq_data *bfqd, struct request *rq)
 	bool waiting, idle_timer_disabled = false;
 
 	if (new_bfqq) {
+		struct bfq_queue *old_bfqq = bfqq;
 		/*
 		 * Release the request's reference to the old bfqq
 		 * and make sure one is taken to the shared queue.
@@ -5459,18 +5458,18 @@ static bool __bfq_insert_request(struct bfq_data *bfqd, struct request *rq)
 		 * then complete the merge and redirect it to
 		 * new_bfqq.
 		 */
-		if (bic_to_bfqq(RQ_BIC(rq), 1) == bfqq)
-			bfq_merge_bfqqs(bfqd, RQ_BIC(rq),
-					bfqq, new_bfqq);
+		if (bic_to_bfqq(RQ_BIC(rq), 1) == bfqq) {
+			while (bfqq != new_bfqq)
+				bfqq = bfq_merge_bfqqs(bfqd, RQ_BIC(rq), bfqq);
+		}
 
-		bfq_clear_bfqq_just_created(bfqq);
+		bfq_clear_bfqq_just_created(old_bfqq);
 		/*
 		 * rq is about to be enqueued into new_bfqq,
 		 * release rq reference on bfqq
 		 */
-		bfq_put_queue(bfqq);
+		bfq_put_queue(old_bfqq);
 		rq->elv.priv[1] = new_bfqq;
-		bfqq = new_bfqq;
 	}
 
 	bfq_update_io_thinktime(bfqd, bfqq);
Signature · 1 line
2.43.0
author maintainer
#26 lore raw

PATCH 26/110 exec: dont WARN for racy path_noexec check

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mateusz Guzik <[email protected]>

[ Upstream commit 0d196e7589cefe207d5d41f37a0a28a1fdeeb7c6 ]

Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact of the previous implementation. They used to legitimately check for the condition, but that got moved up in two commits:
633fb6ac3980 ("exec: move S_ISREG() check earlier") 0fd338b2d2cd ("exec: move path_noexec() check earlier")

Instead of being removed said checks are WARN_ON'ed instead, which has some debug value.

However, the spurious path_noexec check is racy, resulting in unwarranted warnings should someone race with setting the noexec flag.

One can note there is more to perm-checking whether execve is allowed and none of the conditions are guaranteed to still hold after they were tested for.

Additionally this does not validate whether the code path did any perm checking to begin with -- it will pass if the inode happens to be regular.

Keep the redundant path_noexec() check even though it's mindless nonsense checking for guarantee that isn't given so drop the WARN.

Reword the commentary and do small tidy ups while here.

[brauner: keep redundant path_noexec() check]
[cascardo: keep exit label and use it]
---
 fs/exec.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)
fs/exec.c +9 -12
index 6e5324c7e9b69..7144c541818f6 100644
@@ -144,13 +144,11 @@ SYSCALL_DEFINE1(uselib, const char __user *, library)
 		goto out;
 
 	/*
-	 * may_open() has already checked for this, so it should be
-	 * impossible to trip now. But we need to be extra cautious
-	 * and check again at the very end too.
+	 * Check do_open_execat() for an explanation.
 	 */
 	error = -EACCES;
-	if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode) ||
-			 path_noexec(&file->f_path)))
+	if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode)) ||
+	    path_noexec(&file->f_path))
 		goto exit;
 
 	fsnotify_open(file);
@@ -919,16 +917,16 @@ static struct file *do_open_execat(int fd, struct filename *name, int flags)
 
 	file = do_filp_open(fd, name, &open_exec_flags);
 	if (IS_ERR(file))
-		goto out;
+		return file;
 
 	/*
-	 * may_open() has already checked for this, so it should be
-	 * impossible to trip now. But we need to be extra cautious
-	 * and check again at the very end too.
+	 * In the past the regular type check was here. It moved to may_open() in
+	 * 633fb6ac3980 ("exec: move S_ISREG() check earlier"). Since then it is
+	 * an invariant that all non-regular files error out before we get here.
 	 */
 	err = -EACCES;
-	if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode) ||
-			 path_noexec(&file->f_path)))
+	if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode)) ||
+	    path_noexec(&file->f_path))
 		goto exit;
 
 	err = deny_write_access(file);
@@ -938,7 +936,6 @@ static struct file *do_open_execat(int fd, struct filename *name, int flags)
 	if (name->name[0] != '\0')
 		fsnotify_open(file);
 
-out:
 	return file;
 
 exit:
Signature · 1 line
2.43.0
author maintainer
#27 lore raw

PATCH 27/110 iomap: update ki_pos a little later in iomap_dio_complete

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <[email protected]>

upstream 936e114a245b6e38e0dbf706a67e7611fc993da1 commit.

Move the ki_pos update down a bit to prepare for a better common helper that invalidates pages based of an iocb.

Cc Al Viro <[email protected]>
Cc Andreas Gruenbacher <[email protected]>
Cc Anna Schumaker <[email protected]>
Cc Chao Yu <[email protected]>
Cc Christian Brauner <[email protected]>
Cc Ilya Dryomov <[email protected]>
Cc Jaegeuk Kim <[email protected]>
Cc Jens Axboe <[email protected]>
Cc Johannes Thumshirn <[email protected]>
Cc Matthew Wilcox <[email protected]>
Cc Miklos Szeredi <[email protected]>
Cc Miklos Szeredi <[email protected]>
Cc Theodore Ts'o <[email protected]>
Cc Trond Myklebust <[email protected]>
Cc Xiubo Li <[email protected]>
---
 fs/iomap/direct-io.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
fs/iomap/direct-io.c +10 -8
index 933f234d5becd..8a49c0d3a7b46 100644
@@ -93,7 +93,6 @@ ssize_t iomap_dio_complete(struct iomap_dio *dio)
 		if (offset + ret > dio->i_size &&
 		    !(dio->flags & IOMAP_DIO_WRITE))
 			ret = dio->i_size - offset;
-		iocb->ki_pos += ret;
 	}
 
 	/*
@@ -119,15 +118,18 @@ ssize_t iomap_dio_complete(struct iomap_dio *dio)
 	}
 
 	inode_dio_end(file_inode(iocb->ki_filp));
-	/*
-	 * If this is a DSYNC write, make sure we push it to stable storage now
-	 * that we've written data.
-	 */
-	if (ret > 0 && (dio->flags & IOMAP_DIO_NEED_SYNC))
-		ret = generic_write_sync(iocb, ret);
 
-	kfree(dio);
+	if (ret > 0) {
+		iocb->ki_pos += ret;
 
+		/*
+		 * If this is a DSYNC write, make sure we push it to stable
+		 * storage now that we've written data.
+		 */
+		if (dio->flags & IOMAP_DIO_NEED_SYNC)
+			ret = generic_write_sync(iocb, ret);
+	}
+	kfree(dio);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(iomap_dio_complete);
Signature · 1 line
2.43.0
author maintainer
#28 lore raw

PATCH 28/110 drm/vboxvideo: Replace fake VLA at end of vbva_mouse_pointer_shape with real VLA

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede <[email protected]>

[ Upstream commit d92b90f9a54d9300a6e883258e79f36dab53bfae ]

Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with a real VLA to fix a "memcpy: detected field-spanning write error" warning:

[   13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4)
[   13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo]
[   13.320038] Call Trace:
[   13.320173]  hgsmi_update_pointer_shape [vboxvideo]
[   13.320184]  vbox_cursor_atomic_update [vboxvideo]

Note as mentioned in the added comment it seems the original length calculation for the allocated and send hgsmi buffer is 4 bytes too large. Changing this is not the goal of this patch, so this behavior is kept.

---
 drivers/gpu/drm/vboxvideo/hgsmi_base.c | 10 +++++++++-
 drivers/gpu/drm/vboxvideo/vboxvideo.h  |  4 +---
 2 files changed, 10 insertions(+), 4 deletions(-)
drivers/gpu/drm/vboxvideo/hgsmi_base.c +9 -1
index 361d3193258ea..7edc9cf6a6069 100644
@@ -135,7 +135,15 @@ int hgsmi_update_pointer_shape(struct gen_pool *ctx, u32 flags,
 		flags |= VBOX_MOUSE_POINTER_VISIBLE;
 	}
 
-	p = hgsmi_buffer_alloc(ctx, sizeof(*p) + pixel_len, HGSMI_CH_VBVA,
+	/*
+	 * The 4 extra bytes come from switching struct vbva_mouse_pointer_shape
+	 * from having a 4 bytes fixed array at the end to using a proper VLA
+	 * at the end. These 4 extra bytes were not subtracted from sizeof(*p)
+	 * before the switch to the VLA, so this way the behavior is unchanged.
+	 * Chances are these 4 extra bytes are not necessary but they are kept
+	 * to avoid regressions.
+	 */
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p) + pixel_len + 4, HGSMI_CH_VBVA,
 			       VBVA_MOUSE_POINTER_SHAPE);
 	if (!p)
 		return -ENOMEM;
drivers/gpu/drm/vboxvideo/vboxvideo.h +1 -3
index a5de40fe1a76a..bed285fe083c8 100644
@@ -351,10 +351,8 @@ struct vbva_mouse_pointer_shape {
 	 * Bytes in the gap between the AND and the XOR mask are undefined.
 	 * XOR mask scanlines have no gap between them and size of XOR mask is:
 	 * xor_len = width * 4 * height.
-	 *
-	 * Preallocate 4 bytes for accessing actual data as p->data.
 	 */
-	u8 data[4];
+	u8 data[];
 } __packed;
 
 /* pointer is visible */
Signature · 1 line
2.43.0
author maintainer
#29 lore raw

PATCH 29/110 ASoC: fsl_sai: Enable FIFO continue on error FCONT bit

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shengjiu Wang <[email protected]>

[ Upstream commit 72455e33173c1a00c0ce93d2b0198eb45d5f4195 ]

FCONT=1 means On FIFO error, the SAI will continue from the same word that caused the FIFO error to set after the FIFO warning flag has been cleared.

Set FCONT bit in control register to avoid the channel swap issue after SAI xrun.

---
 sound/soc/fsl/fsl_sai.c | 5 ++++-
 sound/soc/fsl/fsl_sai.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)
sound/soc/fsl/fsl_sai.c +4 -1
index 03731d14d4757..998102711da09 100644
@@ -490,6 +490,9 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 
 	val_cr4 |= FSL_SAI_CR4_FRSZ(slots);
 
+	/* Set to avoid channel swap */
+	val_cr4 |= FSL_SAI_CR4_FCONT;
+
 	/* Set to output mode to avoid tri-stated data pins */
 	if (tx)
 		val_cr4 |= FSL_SAI_CR4_CHMOD;
@@ -515,7 +518,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 			   FSL_SAI_CR3_TRCE((1 << pins) - 1));
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
-			   FSL_SAI_CR4_CHMOD_MASK,
+			   FSL_SAI_CR4_CHMOD_MASK | FSL_SAI_CR4_FCONT_MASK,
 			   val_cr4);
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs),
 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
sound/soc/fsl/fsl_sai.h +1 -0
index 691847d54b17d..eff3b7b2dd3e8 100644
@@ -132,6 +132,7 @@
 
 /* SAI Transmit and Receive Configuration 4 Register */
 
+#define FSL_SAI_CR4_FCONT_MASK	BIT(28)
 #define FSL_SAI_CR4_FCONT	BIT(28)
 #define FSL_SAI_CR4_FCOMB_SHIFT BIT(26)
 #define FSL_SAI_CR4_FCOMB_SOFT  BIT(27)
Signature · 1 line
2.43.0
author maintainer
#30 lore raw

PATCH 30/110 arm64: Force position-independent veneers

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Rutland <[email protected]>

[ Upstream commit 9abe390e689f4f5c23c5f507754f8678431b4f72 ]

Certain portions of code always need to be position-independent regardless of CONFIG_RELOCATABLE, including code which is executed in an idmap or which is executed before relocations are applied. In some kernel configurations the LLD linker generates position-dependent veneers for such code, and when executed these result in early boot-time failures.

Marc Zyngier encountered a boot failure resulting from this when building a (particularly cursed) configuration with LLVM, as he reported to the list:

https://lore.kernel.org/linux-arm-kernel/[email protected]/

In Marc's kernel configuration, the .head.text and .rodata.text sections end up more than 128MiB apart, requiring a veneer to branch between the two:

| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w _text
| ffff800080000000 g       .head.text     0000000000000000 _text
| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w primary_entry
| ffff8000889df0e0 g       .rodata.text   000000000000006c primary_entry,

... consequently, LLD inserts a position-dependent veneer for the branch from _stext (in .head.text) to primary_entry (in .rodata.text):

| ffff800080000000 <_text>:
| ffff800080000000:       fa405a4d        ccmp    x18, #0x0, #0xd, pl     // pl = nfrst
| ffff800080000004:       14003fff        b       ffff800080010000 <__AArch64AbsLongThunk_primary_entry>
...
| ffff800080010000 <__AArch64AbsLongThunk_primary_entry>:
| ffff800080010000:       58000050        ldr     x16, ffff800080010008 <__AArch64AbsLongThunk_primary_entry+0x8>
| ffff800080010004:       d61f0200        br      x16
| ffff800080010008:       889df0e0        .word   0x889df0e0
| ffff80008001000c:       ffff8000        .word   0xffff8000

... and as this is executed early in boot before the kernel is mapped in TTBR1 this results in a silent boot failure.

Fix this by passing '--pic-veneer' to the linker, which will cause the linker to use position-independent veneers, e.g.

| ffff800080000000 <_text>:
| ffff800080000000:       fa405a4d        ccmp    x18, #0x0, #0xd, pl     // pl = nfrst
| ffff800080000004:       14003fff        b       ffff800080010000 <__AArch64ADRPThunk_primary_entry>
...
| ffff800080010000 <__AArch64ADRPThunk_primary_entry>:
| ffff800080010000:       f004e3f0        adrp    x16, ffff800089c8f000 <__idmap_text_start>
| ffff800080010004:       91038210        add     x16, x16, #0xe0
| ffff800080010008:       d61f0200        br      x16

I've opted to pass '--pic-veneer' unconditionally, as:

* In addition to solving the boot failure, these sequences are generally nicer as they require fewer instructions and don't need to perform data accesses.

* While the position-independent veneer sequences have a limited +/-2GiB range, this is not a new restriction. Even kernels built with CONFIG_RELOCATABLE=n are limited to 2GiB in size as we have several structues using 32-bit relative offsets and PPREL32 relocations, which are similarly limited to +/-2GiB in range. These include extable entries, jump table entries, and alt_instr entries.

* GNU LD defaults to using position-independent veneers, and supports the same '--pic-veneer' option, so this change is not expected to adversely affect GNU LD.

I've tested with GNU LD 2.30 to 2.42 inclusive and LLVM 13.0.1 to 19.1.0 inclusive, using the kernel.org binaries from:

* https://mirrors.edge.kernel.org/pub/tools/crosstool/
* https://mirrors.edge.kernel.org/pub/tools/llvm/

---
 arch/arm64/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/Makefile +1 -1
index 485b7dbd4f9e3..96dcddc358c78 100644
@@ -10,7 +10,7 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:=--no-undefined -X
+LDFLAGS_vmlinux	:=--no-undefined -X --pic-veneer
 
 ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
Signature · 1 line
2.43.0
author maintainer
#31 lore raw

PATCH 31/110 jfs: Fix sanity check in dbMount

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Kleikamp <[email protected]>

[ Upstream commit 67373ca8404fe57eb1bb4b57f314cff77ce54932 ]

MAXAG is a legitimate value for bmp->db_numag

Fixes e63866a47556 ("jfs: fix out-of-bounds in dbNextAG() and diAlloc()")
---
 fs/jfs/jfs_dmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/jfs/jfs_dmap.c +1 -1
index 8efd93992946b..559f6ebebfc0c 100644
@@ -187,7 +187,7 @@ int dbMount(struct inode *ipbmap)
 	}
 
 	bmp->db_numag = le32_to_cpu(dbmp_le->dn_numag);
-	if (!bmp->db_numag || bmp->db_numag >= MAXAG) {
+	if (!bmp->db_numag || bmp->db_numag > MAXAG) {
 		err = -EINVAL;
 		goto err_release_metapage;
 	}
Signature · 1 line
2.43.0
author maintainer
#32 lore raw

PATCH 32/110 tracing: Consider the NULL character when validating the event length

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leo Yan <[email protected]>

[ Upstream commit 0b6e2e22cb23105fcb171ab92f0f7516c69c8471 ]

strlen() returns a string length excluding the null byte. If the string length equals to the maximum buffer length, the buffer will have no space for the NULL terminating character.

This commit checks this condition and returns failure for it.

Fixes dec65d79fd26 ("tracing/probe: Check event name length correctly")
---
 kernel/trace/trace_probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/trace/trace_probe.c +1 -1
index 073abbe3866b4..1893fe5460acb 100644
@@ -256,7 +256,7 @@ int traceprobe_parse_event_name(const char **pevent, const char **pgroup,
 	if (len == 0) {
 		trace_probe_log_err(offset, NO_EVENT_NAME);
 		return -EINVAL;
-	} else if (len > MAX_EVENT_NAME_LEN) {
+	} else if (len >= MAX_EVENT_NAME_LEN) {
 		trace_probe_log_err(offset, EVENT_TOO_LONG);
 		return -EINVAL;
 	}
Signature · 1 line
2.43.0
author maintainer
#33 lore raw

PATCH 33/110 xfrm: extract dst lookup parameters into a struct

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eyal Birger <[email protected]>

[ Upstream commit e509996b16728e37d5a909a5c63c1bd64f23b306 ]

Preparation for adding more fields to dst lookup functions without changing their signatures.

Stable-dep-of: b84697210343 ("xfrm: respect ip protocols rules criteria when performing dst lookups")

---
 include/net/xfrm.h      | 26 +++++++++++++-------------
 net/ipv4/xfrm4_policy.c | 38 ++++++++++++++++----------------------
 net/ipv6/xfrm6_policy.c | 28 +++++++++++++---------------
 net/xfrm/xfrm_device.c  | 11 ++++++++---
 net/xfrm/xfrm_policy.c  | 35 +++++++++++++++++++++++------------
 5 files changed, 73 insertions(+), 65 deletions(-)
include/net/xfrm.h +13 -13
index 6fbaf304648f6..142967e456b18 100644
@@ -321,20 +321,23 @@ struct xfrm_if_cb {
 void xfrm_if_register_cb(const struct xfrm_if_cb *ifcb);
 void xfrm_if_unregister_cb(void);
 
+struct xfrm_dst_lookup_params {
+	struct net *net;
+	int tos;
+	int oif;
+	xfrm_address_t *saddr;
+	xfrm_address_t *daddr;
+	u32 mark;
+};
+
 struct net_device;
 struct xfrm_type;
 struct xfrm_dst;
 struct xfrm_policy_afinfo {
 	struct dst_ops		*dst_ops;
-	struct dst_entry	*(*dst_lookup)(struct net *net,
-					       int tos, int oif,
-					       const xfrm_address_t *saddr,
-					       const xfrm_address_t *daddr,
-					       u32 mark);
-	int			(*get_saddr)(struct net *net, int oif,
-					     xfrm_address_t *saddr,
-					     xfrm_address_t *daddr,
-					     u32 mark);
+	struct dst_entry	*(*dst_lookup)(const struct xfrm_dst_lookup_params *params);
+	int			(*get_saddr)(xfrm_address_t *saddr,
+					     const struct xfrm_dst_lookup_params *params);
 	int			(*fill_dst)(struct xfrm_dst *xdst,
 					    struct net_device *dev,
 					    const struct flowi *fl);
@@ -1658,10 +1661,7 @@ static inline int xfrm_user_policy(struct sock *sk, int optname,
 }
 #endif
 
-struct dst_entry *__xfrm_dst_lookup(struct net *net, int tos, int oif,
-				    const xfrm_address_t *saddr,
-				    const xfrm_address_t *daddr,
-				    int family, u32 mark);
+struct dst_entry *__xfrm_dst_lookup(int family, const struct xfrm_dst_lookup_params *params);
 
 struct xfrm_policy *xfrm_policy_alloc(struct net *net, gfp_t gfp);
 
net/ipv4/xfrm4_policy.c +16 -22
index 4548a91acdc89..d1c2619e03740 100644
@@ -17,47 +17,41 @@
 #include <net/ip.h>
 #include <net/l3mdev.h>
 
-static struct dst_entry *__xfrm4_dst_lookup(struct net *net, struct flowi4 *fl4,
-					    int tos, int oif,
-					    const xfrm_address_t *saddr,
-					    const xfrm_address_t *daddr,
-					    u32 mark)
+static struct dst_entry *__xfrm4_dst_lookup(struct flowi4 *fl4,
+					    const struct xfrm_dst_lookup_params *params)
 {
 	struct rtable *rt;
 
 	memset(fl4, 0, sizeof(*fl4));
-	fl4->daddr = daddr->a4;
-	fl4->flowi4_tos = tos;
-	fl4->flowi4_l3mdev = l3mdev_master_ifindex_by_index(net, oif);
-	fl4->flowi4_mark = mark;
-	if (saddr)
-		fl4->saddr = saddr->a4;
-
-	rt = __ip_route_output_key(net, fl4);
+	fl4->daddr = params->daddr->a4;
+	fl4->flowi4_tos = params->tos;
+	fl4->flowi4_l3mdev = l3mdev_master_ifindex_by_index(params->net,
+							    params->oif);
+	fl4->flowi4_mark = params->mark;
+	if (params->saddr)
+		fl4->saddr = params->saddr->a4;
+
+	rt = __ip_route_output_key(params->net, fl4);
 	if (!IS_ERR(rt))
 		return &rt->dst;
 
 	return ERR_CAST(rt);
 }
 
-static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos, int oif,
-					  const xfrm_address_t *saddr,
-					  const xfrm_address_t *daddr,
-					  u32 mark)
+static struct dst_entry *xfrm4_dst_lookup(const struct xfrm_dst_lookup_params *params)
 {
 	struct flowi4 fl4;
 
-	return __xfrm4_dst_lookup(net, &fl4, tos, oif, saddr, daddr, mark);
+	return __xfrm4_dst_lookup(&fl4, params);
 }
 
-static int xfrm4_get_saddr(struct net *net, int oif,
-			   xfrm_address_t *saddr, xfrm_address_t *daddr,
-			   u32 mark)
+static int xfrm4_get_saddr(xfrm_address_t *saddr,
+			   const struct xfrm_dst_lookup_params *params)
 {
 	struct dst_entry *dst;
 	struct flowi4 fl4;
 
-	dst = __xfrm4_dst_lookup(net, &fl4, 0, oif, NULL, daddr, mark);
+	dst = __xfrm4_dst_lookup(&fl4, params);
 	if (IS_ERR(dst))
 		return -EHOSTUNREACH;
 
net/ipv6/xfrm6_policy.c +13 -15
index 492b9692c0dc0..40183fdf7da0e 100644
@@ -23,23 +23,21 @@
 #include <net/ip6_route.h>
 #include <net/l3mdev.h>
 
-static struct dst_entry *xfrm6_dst_lookup(struct net *net, int tos, int oif,
-					  const xfrm_address_t *saddr,
-					  const xfrm_address_t *daddr,
-					  u32 mark)
+static struct dst_entry *xfrm6_dst_lookup(const struct xfrm_dst_lookup_params *params)
 {
 	struct flowi6 fl6;
 	struct dst_entry *dst;
 	int err;
 
 	memset(&fl6, 0, sizeof(fl6));
-	fl6.flowi6_l3mdev = l3mdev_master_ifindex_by_index(net, oif);
-	fl6.flowi6_mark = mark;
-	memcpy(&fl6.daddr, daddr, sizeof(fl6.daddr));
-	if (saddr)
-		memcpy(&fl6.saddr, saddr, sizeof(fl6.saddr));
+	fl6.flowi6_l3mdev = l3mdev_master_ifindex_by_index(params->net,
+							   params->oif);
+	fl6.flowi6_mark = params->mark;
+	memcpy(&fl6.daddr, params->daddr, sizeof(fl6.daddr));
+	if (params->saddr)
+		memcpy(&fl6.saddr, params->saddr, sizeof(fl6.saddr));
 
-	dst = ip6_route_output(net, NULL, &fl6);
+	dst = ip6_route_output(params->net, NULL, &fl6);
 
 	err = dst->error;
 	if (dst->error) {
@@ -50,15 +48,14 @@ static struct dst_entry *xfrm6_dst_lookup(struct net *net, int tos, int oif,
 	return dst;
 }
 
-static int xfrm6_get_saddr(struct net *net, int oif,
-			   xfrm_address_t *saddr, xfrm_address_t *daddr,
-			   u32 mark)
+static int xfrm6_get_saddr(xfrm_address_t *saddr,
+			   const struct xfrm_dst_lookup_params *params)
 {
 	struct dst_entry *dst;
 	struct net_device *dev;
 	struct inet6_dev *idev;
 
-	dst = xfrm6_dst_lookup(net, 0, oif, NULL, daddr, mark);
+	dst = xfrm6_dst_lookup(params);
 	if (IS_ERR(dst))
 		return -EHOSTUNREACH;
 
@@ -68,7 +65,8 @@ static int xfrm6_get_saddr(struct net *net, int oif,
 		return -EHOSTUNREACH;
 	}
 	dev = idev->dev;
-	ipv6_dev_get_saddr(dev_net(dev), dev, &daddr->in6, 0, &saddr->in6);
+	ipv6_dev_get_saddr(dev_net(dev), dev, &params->daddr->in6, 0,
+			   &saddr->in6);
 	dst_release(dst);
 	return 0;
 }
net/xfrm/xfrm_device.c +8 -3
index 8b8e957a69c36..4d13f7a372ab6 100644
@@ -241,6 +241,8 @@ int xfrm_dev_state_add(struct net *net, struct xfrm_state *x,
 
 	dev = dev_get_by_index(net, xuo->ifindex);
 	if (!dev) {
+		struct xfrm_dst_lookup_params params;
+
 		if (!(xuo->flags & XFRM_OFFLOAD_INBOUND)) {
 			saddr = &x->props.saddr;
 			daddr = &x->id.daddr;
@@ -249,9 +251,12 @@ int xfrm_dev_state_add(struct net *net, struct xfrm_state *x,
 			daddr = &x->props.saddr;
 		}
 
-		dst = __xfrm_dst_lookup(net, 0, 0, saddr, daddr,
-					x->props.family,
-					xfrm_smark_get(0, x));
+		memset(&params, 0, sizeof(params));
+		params.net = net;
+		params.saddr = saddr;
+		params.daddr = daddr;
+		params.mark = xfrm_smark_get(0, x);
+		dst = __xfrm_dst_lookup(x->props.family, &params);
 		if (IS_ERR(dst))
 			return 0;
 
net/xfrm/xfrm_policy.c +23 -12
index 39910d4eff62b..a7f8da5241ae5 100644
@@ -251,10 +251,8 @@ static const struct xfrm_if_cb *xfrm_if_get_cb(void)
 	return rcu_dereference(xfrm_if_cb);
 }
 
-struct dst_entry *__xfrm_dst_lookup(struct net *net, int tos, int oif,
-				    const xfrm_address_t *saddr,
-				    const xfrm_address_t *daddr,
-				    int family, u32 mark)
+struct dst_entry *__xfrm_dst_lookup(int family,
+				    const struct xfrm_dst_lookup_params *params)
 {
 	const struct xfrm_policy_afinfo *afinfo;
 	struct dst_entry *dst;
@@ -263,7 +261,7 @@ struct dst_entry *__xfrm_dst_lookup(struct net *net, int tos, int oif,
 	if (unlikely(afinfo == NULL))
 		return ERR_PTR(-EAFNOSUPPORT);
 
-	dst = afinfo->dst_lookup(net, tos, oif, saddr, daddr, mark);
+	dst = afinfo->dst_lookup(params);
 
 	rcu_read_unlock();
 
@@ -277,6 +275,7 @@ static inline struct dst_entry *xfrm_dst_lookup(struct xfrm_state *x,
 						xfrm_address_t *prev_daddr,
 						int family, u32 mark)
 {
+	struct xfrm_dst_lookup_params params;
 	struct net *net = xs_net(x);
 	xfrm_address_t *saddr = &x->props.saddr;
 	xfrm_address_t *daddr = &x->id.daddr;
@@ -291,7 +290,14 @@ static inline struct dst_entry *xfrm_dst_lookup(struct xfrm_state *x,
 		daddr = x->coaddr;
 	}
 
-	dst = __xfrm_dst_lookup(net, tos, oif, saddr, daddr, family, mark);
+	params.net = net;
+	params.saddr = saddr;
+	params.daddr = daddr;
+	params.tos = tos;
+	params.oif = oif;
+	params.mark = mark;
+
+	dst = __xfrm_dst_lookup(family, &params);
 
 	if (!IS_ERR(dst)) {
 		if (prev_saddr != saddr)
@@ -2344,15 +2350,15 @@ int __xfrm_sk_clone_policy(struct sock *sk, const struct sock *osk)
 }
 
 static int
-xfrm_get_saddr(struct net *net, int oif, xfrm_address_t *local,
-	       xfrm_address_t *remote, unsigned short family, u32 mark)
+xfrm_get_saddr(unsigned short family, xfrm_address_t *saddr,
+	       const struct xfrm_dst_lookup_params *params)
 {
 	int err;
 	const struct xfrm_policy_afinfo *afinfo = xfrm_policy_get_afinfo(family);
 
 	if (unlikely(afinfo == NULL))
 		return -EINVAL;
-	err = afinfo->get_saddr(net, oif, local, remote, mark);
+	err = afinfo->get_saddr(saddr, params);
 	rcu_read_unlock();
 	return err;
 }
@@ -2381,9 +2387,14 @@ xfrm_tmpl_resolve_one(struct xfrm_policy *policy, const struct flowi *fl,
 			remote = &tmpl->id.daddr;
 			local = &tmpl->saddr;
 			if (xfrm_addr_any(local, tmpl->encap_family)) {
-				error = xfrm_get_saddr(net, fl->flowi_oif,
-						       &tmp, remote,
-						       tmpl->encap_family, 0);
+				struct xfrm_dst_lookup_params params;
+
+				memset(&params, 0, sizeof(params));
+				params.net = net;
+				params.oif = fl->flowi_oif;
+				params.daddr = remote;
+				error = xfrm_get_saddr(tmpl->encap_family, &tmp,
+						       &params);
 				if (error)
 					goto fail;
 				local = &tmp;
Signature · 1 line
2.43.0
author maintainer
#34 lore raw

PATCH 34/110 xfrm: respect ip protocols rules criteria when performing dst lookups

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eyal Birger <[email protected]>

[ Upstream commit b8469721034300bbb6dec5b4bf32492c95e16a0c ]

The series in the "fixes" tag added the ability to consider L4 attributes in routing rules.

The dst lookup on the outer packet of encapsulated traffic in the xfrm code was not adapted to this change, thus routing behavior that relies on L4 information is not respected.

Pass the ip protocol information when performing dst lookups.

Fixes a25724b05af0 ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
---
 include/net/xfrm.h      |  2 ++
 net/ipv4/xfrm4_policy.c |  2 ++
 net/ipv6/xfrm6_policy.c |  3 +++
 net/xfrm/xfrm_policy.c  | 15 +++++++++++++++
 4 files changed, 22 insertions(+)
include/net/xfrm.h +2 -0
index 142967e456b18..798df30c2d253 100644
@@ -328,6 +328,8 @@ struct xfrm_dst_lookup_params {
 	xfrm_address_t *saddr;
 	xfrm_address_t *daddr;
 	u32 mark;
+	__u8 ipproto;
+	union flowi_uli uli;
 };
 
 struct net_device;
net/ipv4/xfrm4_policy.c +2 -0
index d1c2619e03740..5d8e38f4ecc07 100644
@@ -30,6 +30,8 @@ static struct dst_entry *__xfrm4_dst_lookup(struct flowi4 *fl4,
 	fl4->flowi4_mark = params->mark;
 	if (params->saddr)
 		fl4->saddr = params->saddr->a4;
+	fl4->flowi4_proto = params->ipproto;
+	fl4->uli = params->uli;
 
 	rt = __ip_route_output_key(params->net, fl4);
 	if (!IS_ERR(rt))
net/ipv6/xfrm6_policy.c +3 -0
index 40183fdf7da0e..f5ef5e4c88df1 100644
@@ -37,6 +37,9 @@ static struct dst_entry *xfrm6_dst_lookup(const struct xfrm_dst_lookup_params *p
 	if (params->saddr)
 		memcpy(&fl6.saddr, params->saddr, sizeof(fl6.saddr));
 
+	fl6.flowi4_proto = params->ipproto;
+	fl6.uli = params->uli;
+
 	dst = ip6_route_output(params->net, NULL, &fl6);
 
 	err = dst->error;
net/xfrm/xfrm_policy.c +15 -0
index a7f8da5241ae5..a1a662a55c2ae 100644
@@ -296,6 +296,21 @@ static inline struct dst_entry *xfrm_dst_lookup(struct xfrm_state *x,
 	params.tos = tos;
 	params.oif = oif;
 	params.mark = mark;
+	params.ipproto = x->id.proto;
+	if (x->encap) {
+		switch (x->encap->encap_type) {
+		case UDP_ENCAP_ESPINUDP:
+			params.ipproto = IPPROTO_UDP;
+			params.uli.ports.sport = x->encap->encap_sport;
+			params.uli.ports.dport = x->encap->encap_dport;
+			break;
+		case TCP_ENCAP_ESPINTCP:
+			params.ipproto = IPPROTO_TCP;
+			params.uli.ports.sport = x->encap->encap_sport;
+			params.uli.ports.dport = x->encap->encap_dport;
+			break;
+		}
+	}
 
 	dst = __xfrm_dst_lookup(family, &params);
 
Signature · 1 line
2.43.0
author maintainer
#35 lore raw

PATCH 35/110 net/sun3_82586: fix potential memory leak in sun3_82586_send_packet()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Hai <[email protected]>

[ Upstream commit 2cb3f56e827abb22c4168ad0c1bbbf401bb2f3b8 ]

The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Message-ID: <[email protected]>

---
 drivers/net/ethernet/i825xx/sun3_82586.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/i825xx/sun3_82586.c +1 -0
index 83a6114afbf90..3278e2126dc29 100644
@@ -1015,6 +1015,7 @@ sun3_82586_send_packet(struct sk_buff *skb, struct net_device *dev)
 	if(skb->len > XMIT_BUFF_SIZE)
 	{
 		printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev->name,XMIT_BUFF_SIZE,skb->len);
+		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
 
Signature · 1 line
2.43.0
author maintainer
#36 lore raw

PATCH 36/110 be2net: fix potential memory leak in be_xmit()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Hai <[email protected]>

[ Upstream commit e4dd8bfe0f6a23acd305f9b892c00899089bd621 ]

The be_xmit() returns NETDEV_TX_OK without freeing skb
in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it.

Fixes 760c295e0e8d ("be2net: Support for OS2BMC.")

Message-ID: <[email protected]>

---
 drivers/net/ethernet/emulex/benet/be_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/emulex/benet/be_main.c +5 -5
index edd4dd73b3e32..f018379d13509 100644
@@ -1382,10 +1382,8 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 	be_get_wrb_params_from_skb(adapter, skb, &wrb_params);
 
 	wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params);
-	if (unlikely(!wrb_cnt)) {
-		dev_kfree_skb_any(skb);
-		goto drop;
-	}
+	if (unlikely(!wrb_cnt))
+		goto drop_skb;
 
 	/* if os2bmc is enabled and if the pkt is destined to bmc,
 	 * enqueue the pkt a 2nd time with mgmt bit set.
@@ -1394,7 +1392,7 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 		BE_WRB_F_SET(wrb_params.features, OS2BMC, 1);
 		wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params);
 		if (unlikely(!wrb_cnt))
-			goto drop;
+			goto drop_skb;
 		else
 			skb_get(skb);
 	}
@@ -1408,6 +1406,8 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 		be_xmit_flush(adapter, txo);
 
 	return NETDEV_TX_OK;
+drop_skb:
+	dev_kfree_skb_any(skb);
 drop:
 	tx_stats(txo)->tx_drv_drops++;
 	/* Flush the already enqueued tx requests */
Signature · 1 line
2.43.0
author maintainer
#37 lore raw

PATCH 37/110 net: usb: usbnet: fix name regression

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <[email protected]>

[ Upstream commit 8a7d12d674ac6f2147c18f36d1e15f1a48060edf ]

The fix for MAC addresses broke detection of the naming convention because it gave network devices no random MAC before bind() was called. This means that the check for the local assignment bit was always negative as the address was zeroed from allocation, instead of from overwriting the MAC with a unique hardware address.

The correct check for whether bind() has altered the MAC is done with is_zero_ether_addr

---
 drivers/net/usb/usbnet.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/usb/usbnet.c +2 -1
index 669cd20cfe00a..b3d363ebea26e 100644
@@ -1717,7 +1717,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 		// can rename the link if it knows better.
 		if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
 		    ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
-		     (net->dev_addr [0] & 0x02) == 0))
+		     /* somebody touched it*/
+		     !is_zero_ether_addr(net->dev_addr)))
 			strscpy(net->name, "eth%d", sizeof(net->name));
 		/* WLAN devices should always be named "wlan%d" */
 		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
Signature · 1 line
2.43.0
author maintainer
#38 lore raw

PATCH 38/110 net: sched: fix use-after-free in taprio_change()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Antipov <[email protected]>

[ Upstream commit f504465970aebb2467da548f7c1efbbf36d0f44b ]

In 'taprio_change()', 'admin' pointer may become dangling due to sched switch / removal caused by 'advance_sched()', and critical section protected by 'q->current_entry_lock' is too small to prevent from such a scenario (which causes use-after-free detected by KASAN). Fix this by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update 'admin' immediately before an attempt to schedule freeing.

---
 net/sched/sch_taprio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/sched/sch_taprio.c +2 -1
index 04ed23b5f21b4..16ab7b1480661 100644
@@ -1590,7 +1590,8 @@ static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
 
 		taprio_start_sched(sch, start, new_admin);
 
-		rcu_assign_pointer(q->admin_sched, new_admin);
+		admin = rcu_replace_pointer(q->admin_sched, new_admin,
+					    lockdep_rtnl_is_held());
 		if (admin)
 			call_rcu(&admin->rcu, taprio_free_sched_cb);
 
Signature · 1 line
2.43.0
author maintainer
#39 lore raw

PATCH 39/110 r8169: avoid unsolicited interrupts

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <[email protected]>

[ Upstream commit 10ce0db787004875f4dba068ea952207d1d8abeb ]

It was reported that after resume from suspend a PCI error is logged and connectivity is broken. Error message is:
PCI error (cmd = 0x0407, status_errs = 0x0000)
The message seems to be a red herring as none of the error bits is set, and the PCI command register value also is normal. Exception handling for a PCI error includes a chip reset what apparently brakes connectivity here. The interrupt status bit triggering the PCI error handling isn't actually used on PCIe chip versions, so it's not clear why this bit is set by the chip. Fix this by ignoring this bit on PCIe chip versions.

---
 drivers/net/ethernet/realtek/r8169_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/realtek/r8169_main.c +3 -1
index e9296d63450d8..3aa1dda3406cd 100644
@@ -4650,7 +4650,9 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 	if ((status & 0xffff) == 0xffff || !(status & tp->irq_mask))
 		return IRQ_NONE;
 
-	if (unlikely(status & SYSErr)) {
+	/* At least RTL8168fp may unexpectedly set the SYSErr bit */
+	if (unlikely(status & SYSErr &&
+	    tp->mac_version <= RTL_GIGA_MAC_VER_06)) {
 		rtl8169_pcierr_interrupt(tp->dev);
 		goto out;
 	}
Signature · 1 line
2.43.0
author maintainer
#40 lore raw

PATCH 40/110 posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan <[email protected]>

[ Upstream commit 6e62807c7fbb3c758d233018caf94dfea9c65dbd ]

If get_clock_desc() succeeds, it calls fget() for the clockid's fd, and get the clk->rwsem read lock, so the error path should release the lock to make the lock balance and fput the clockid's fd to make the refcount balance and release the fd related resource.

However the below commit left the error path locked behind resulting in unbalanced locking. Check timespec64_valid_strict() before get_clock_desc() to fix it, because the "ts" is not changed after that.

Fixes d8794ac20a29 ("posix-clock: Fix missing timespec64 check in pc_clock_settime()")
[[email protected]: fixed commit message typo]
---
 kernel/time/posix-clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/time/posix-clock.c +3 -3
index 8127673bfc45e..05e73d209aa87 100644
@@ -290,6 +290,9 @@ static int pc_clock_settime(clockid_t id, const struct timespec64 *ts)
 	struct posix_clock_desc cd;
 	int err;
 
+	if (!timespec64_valid_strict(ts))
+		return -EINVAL;
+
 	err = get_clock_desc(id, &cd);
 	if (err)
 		return err;
@@ -299,9 +302,6 @@ static int pc_clock_settime(clockid_t id, const struct timespec64 *ts)
 		goto out;
 	}
 
-	if (!timespec64_valid_strict(ts))
-		return -EINVAL;
-
 	if (cd.clk->ops.clock_settime)
 		err = cd.clk->ops.clock_settime(cd.clk, ts);
 	else
Signature · 1 line
2.43.0
author maintainer
#41 lore raw

PATCH 41/110 ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrey Shumilin <[email protected]>

[ Upstream commit 72cafe63b35d06b5cfbaf807e90ae657907858da ]

The step variable is initialized to zero. It is changed in the loop, but if it's not changed it will remain zero. Add a variable check before the division.

The observed behavior was introduced by commit 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"), and it is difficult to show that any of the interval parameters will satisfy the snd_interval_test() condition with data from the amdtp_rate_table[] table.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size")
---
 sound/firewire/amdtp-stream.c | 3 +++
 1 file changed, 3 insertions(+)
sound/firewire/amdtp-stream.c +3 -0
index 7a282d8e71485..bd272ab2048e4 100644
@@ -163,6 +163,9 @@ static int apply_constraint_to_size(struct snd_pcm_hw_params *params,
 			step = max(step, amdtp_syt_intervals[i]);
 	}
 
+	if (step == 0)
+		return -EINVAL;
+
 	t.min = roundup(s->min, step);
 	t.max = rounddown(s->max, step);
 	t.integer = 1;
Signature · 1 line
2.43.0
author maintainer
#42 lore raw

PATCH 42/110 ALSA: hda/realtek: Update default depop procedure

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kailang Yang <[email protected]>

[ Upstream commit e3ea2757c312e51bbf62ebc434a6f7df1e3a201f ]

Old procedure has a chance to meet Headphone no output.

Fixes c2d6af53a43f ("ALSA: hda/realtek - Add default procedure for suspend and resume state")
---
 sound/pci/hda/patch_realtek.c | 38 ++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 21 deletions(-)
sound/pci/hda/patch_realtek.c +17 -21
index 05a2442cfc656..2ccc1f7e424db 100644
@@ -3789,20 +3789,18 @@ static void alc_default_init(struct hda_codec *codec)
 
 	hp_pin_sense = snd_hda_jack_detect(codec, hp_pin);
 
-	if (hp_pin_sense)
+	if (hp_pin_sense) {
 		msleep(2);
 
-	snd_hda_codec_write(codec, hp_pin, 0,
-			    AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
-
-	if (hp_pin_sense)
-		msleep(85);
+		snd_hda_codec_write(codec, hp_pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
 
-	snd_hda_codec_write(codec, hp_pin, 0,
-			    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+		msleep(75);
 
-	if (hp_pin_sense)
-		msleep(100);
+		snd_hda_codec_write(codec, hp_pin, 0,
+				    AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+		msleep(75);
+	}
 }
 
 static void alc_default_shutup(struct hda_codec *codec)
@@ -3818,22 +3816,20 @@ static void alc_default_shutup(struct hda_codec *codec)
 
 	hp_pin_sense = snd_hda_jack_detect(codec, hp_pin);
 
-	if (hp_pin_sense)
+	if (hp_pin_sense) {
 		msleep(2);
 
-	snd_hda_codec_write(codec, hp_pin, 0,
-			    AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
-
-	if (hp_pin_sense)
-		msleep(85);
-
-	if (!spec->no_shutup_pins)
 		snd_hda_codec_write(codec, hp_pin, 0,
-				    AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
+				    AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
 
-	if (hp_pin_sense)
-		msleep(100);
+		msleep(75);
 
+		if (!spec->no_shutup_pins)
+			snd_hda_codec_write(codec, hp_pin, 0,
+					    AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
+
+		msleep(75);
+	}
 	alc_auto_setup_eapd(codec, false);
 	alc_shutup_pins(codec);
 }
Signature · 1 line
2.43.0
author maintainer
#43 lore raw

PATCH 43/110 drm/amd: Guard against bad data for ATIF ACPI method

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <[email protected]>

commit bf58f03931fdcf7b3c45cb76ac13244477a60f44 upstream.

If a BIOS provides bad data in response to an ATIF method call this causes a NULL pointer dereference in the caller.

```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```

It has been encountered on at least one system, so guard for it.

Fixes d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
(cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee)
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c +12 -3
@@ -87,6 +87,7 @@ static union acpi_object *amdgpu_atif_ca
 					   struct acpi_buffer *params)
 {
 	acpi_status status;
+	union acpi_object *obj;
 	union acpi_object atif_arg_elements[2];
 	struct acpi_object_list atif_arg;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -109,16 +110,24 @@ static union acpi_object *amdgpu_atif_ca
 
 	status = acpi_evaluate_object(atif->handle, NULL, &atif_arg,
 				      &buffer);
+	obj = (union acpi_object *)buffer.pointer;
 
-	/* Fail only if calling the method fails and ATIF is supported */
+	/* Fail if calling the method fails and ATIF is supported */
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 		DRM_DEBUG_DRIVER("failed to evaluate ATIF got %s\n",
 				 acpi_format_exception(status));
-		kfree(buffer.pointer);
+		kfree(obj);
 		return NULL;
 	}
 
-	return buffer.pointer;
+	if (obj->type != ACPI_TYPE_BUFFER) {
+		DRM_DEBUG_DRIVER("bad object returned from ATIF: %d\n",
+				 obj->type);
+		kfree(obj);
+		return NULL;
+	}
+
+	return obj;
 }
 
 /**
author maintainer
#44 lore raw

PATCH 44/110 ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christian Heusel <[email protected]>

commit 53f1a907d36fb3aa02a4d34073bcec25823a6c74 upstream.

The LG Gram Pro 16 2-in-1 (2024) the 16T90SP has its keybopard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard.

Add the 16T90SP to the irq1_level_low_skip_override[] quirk table to fix this.

---
 drivers/acpi/resource.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/acpi/resource.c +7 -0
@@ -507,6 +507,13 @@ static const struct dmi_system_id asus_l
 			DMI_MATCH(DMI_BOARD_NAME, "GMxHGxx"),
 		},
 	},
+	{
+		/* LG Electronics 16T90SP */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+			DMI_MATCH(DMI_BOARD_NAME, "16T90SP"),
+		},
+	},
 	{ }
 };
 
author maintainer
#45 lore raw

PATCH 45/110 ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shubham Panwar <[email protected]>

commit 8fa73ee44daefc884c53a25158c25a4107eb5a94 upstream.

Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state detection issue.

The _LID device incorrectly returns the lid status as "closed" during boot, causing the system to enter a suspend loop right after booting.

The quirk ensures that the correct lid state is reported initially, preventing the system from immediately suspending after startup. It only addresses the initial lid state detection and ensures proper system behavior upon boot.

---
 drivers/acpi/button.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/acpi/button.c +11 -0
@@ -124,6 +124,17 @@ static const struct dmi_system_id dmi_li
 		},
 		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
 	},
+	{
+		/*
+		 * Samsung galaxybook2 ,initial _LID device notification returns
+		 * lid closed.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "750XED"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
+	},
 	{}
 };
 
author maintainer
#46 lore raw

PATCH 46/110 nilfs2: fix kernel bug due to missing clearing of buffer delay flag

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <[email protected]>

commit 6ed469df0bfbef3e4b44fca954a781919db9f7ab upstream.

Syzbot reported that after nilfs2 reads a corrupted file system image and degrades to read-only, the BUG_ON check for the buffer delay flag in submit_bh_wbc() may fail, causing a kernel bug.

This is because the buffer delay flag is not cleared when clearing the buffer state flags to discard a page/folio or a buffer head. So, fix this.

This became necessary when the use of nilfs2's own page clear routine was expanded. This state inconsistency does not occur if the buffer is written normally by log writing.

Fixes 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Reported-by [email protected]
---
 fs/nilfs2/page.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
fs/nilfs2/page.c +4 -2
@@ -77,7 +77,8 @@ void nilfs_forget_buffer(struct buffer_h
 	const unsigned long clear_bits =
 		(BIT(BH_Uptodate) | BIT(BH_Dirty) | BIT(BH_Mapped) |
 		 BIT(BH_Async_Write) | BIT(BH_NILFS_Volatile) |
-		 BIT(BH_NILFS_Checked) | BIT(BH_NILFS_Redirected));
+		 BIT(BH_NILFS_Checked) | BIT(BH_NILFS_Redirected) |
+		 BIT(BH_Delay));
 
 	lock_buffer(bh);
 	set_mask_bits(&bh->b_state, clear_bits, 0);
@@ -409,7 +410,8 @@ void nilfs_clear_dirty_page(struct page
 		const unsigned long clear_bits =
 			(BIT(BH_Uptodate) | BIT(BH_Dirty) | BIT(BH_Mapped) |
 			 BIT(BH_Async_Write) | BIT(BH_NILFS_Volatile) |
-			 BIT(BH_NILFS_Checked) | BIT(BH_NILFS_Redirected));
+			 BIT(BH_NILFS_Checked) | BIT(BH_NILFS_Redirected) |
+			 BIT(BH_Delay));
 
 		bh = head = page_buffers(page);
 		do {
author maintainer
#47 lore raw

PATCH 47/110 openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aleksa Sarai <[email protected]>

commit f92f0a1b05698340836229d791b3ffecc71b265a upstream.

While we do currently return -EFAULT in this case, it seems prudent to follow the behaviour of other syscalls like clone3. It seems quite unlikely that anyone depends on this error code being EFAULT, but we can always revert this if it turns out to be an issue.

---
 fs/open.c |    2 ++
 1 file changed, 2 insertions(+)
fs/open.c +2 -0
@@ -1270,6 +1270,8 @@ SYSCALL_DEFINE4(openat2, int, dfd, const
 
 	if (unlikely(usize < OPEN_HOW_SIZE_VER0))
 		return -EINVAL;
+	if (unlikely(usize > PAGE_SIZE))
+		return -E2BIG;
 
 	err = copy_struct_from_user(&tmp, sizeof(tmp), how, usize);
 	if (err)
author maintainer
#48 lore raw

PATCH 48/110 KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <[email protected]>

commit f559b2e9c5c5308850544ab59396b7d53cfc67bd upstream.

Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits 4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't enforce 32-byte alignment of nCR3.

In the absolute worst case scenario, failure to ignore bits 4:0 can result in an out-of-bounds read, e.g. if the target page is at the end of a memslot, and the VMM isn't using guard pages.

Per the APM:

The CR3 register points to the base address of the page-directory-pointer table. The page-directory-pointer table is aligned on a 32-byte boundary, with the low 5 address bits 4:0 assumed to be 0.

And the SDM's much more explicit:

4:0 Ignored

Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow that is broken.

Fixes e4e517b4be01 ("KVM: MMU: Do not unconditionally read PDPTE from guest memory")
Cc Andy Nguyen <[email protected]>

Message-ID: <[email protected]>

---
 arch/x86/kvm/svm/nested.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
arch/x86/kvm/svm/nested.c +5 -1
@@ -75,8 +75,12 @@ static u64 nested_svm_get_tdp_pdptr(stru
 	u64 pdpte;
 	int ret;
 
+	/*
+	 * Note, nCR3 is "assumed" to be 32-byte aligned, i.e. the CPU ignores
+	 * nCR3[4:0] when loading PDPTEs from memory.
+	 */
 	ret = kvm_vcpu_read_guest_page(vcpu, gpa_to_gfn(cr3), &pdpte,
-				       offset_in_page(cr3) + index * 8, 8);
+				       (cr3 & GENMASK(11, 5)) + index * 8, 8);
 	if (ret)
 		return 0;
 	return pdpte;
author maintainer
#49 lore raw

PATCH 49/110 ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: José Relvas <[email protected]>

commit 35fdc6e1c16099078bcbd73a6c8f1733ae7f1909 upstream.

The Acer Predator G9-593 has a 2+1 speaker system which isn't probed correctly.
This patch adds a quirk with the proper pin connections.

Note that I do not own this laptop, so I cannot guarantee that this fixes the issue.
Testing was done by other users here:
https://discussion.fedoraproject.org/t/-/118482

This model appears to have two different dev IDs...

- 0x1177 (as seen on the forum link above)
- 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f)

I don't think the audio system was changed between model revisions, so the patch applies for both IDs.

---
 sound/pci/hda/patch_realtek.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
sound/pci/hda/patch_realtek.c +10 -0
@@ -6966,6 +6966,7 @@ enum {
 	ALC286_FIXUP_ACER_AIO_HEADSET_MIC,
 	ALC256_FIXUP_ASUS_HEADSET_MIC,
 	ALC256_FIXUP_ASUS_MIC_NO_PRESENCE,
+	ALC255_FIXUP_PREDATOR_SUBWOOFER,
 	ALC299_FIXUP_PREDATOR_SPK,
 	ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE,
 	ALC289_FIXUP_DELL_SPK2,
@@ -8200,6 +8201,13 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC256_FIXUP_ASUS_HEADSET_MODE
 	},
+	[ALC255_FIXUP_PREDATOR_SUBWOOFER] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x17, 0x90170151 }, /* use as internal speaker (LFE) */
+			{ 0x1b, 0x90170152 } /* use as internal speaker (back) */
+		}
+	},
 	[ALC299_FIXUP_PREDATOR_SPK] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -8932,6 +8940,8 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1025, 0x110e, "Acer Aspire ES1-432", ALC255_FIXUP_ACER_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1025, 0x1166, "Acer Veriton N4640G", ALC269_FIXUP_LIFEBOOK),
 	SND_PCI_QUIRK(0x1025, 0x1167, "Acer Veriton N6640G", ALC269_FIXUP_LIFEBOOK),
+	SND_PCI_QUIRK(0x1025, 0x1177, "Acer Predator G9-593", ALC255_FIXUP_PREDATOR_SUBWOOFER),
+	SND_PCI_QUIRK(0x1025, 0x1178, "Acer Predator G9-593", ALC255_FIXUP_PREDATOR_SUBWOOFER),
 	SND_PCI_QUIRK(0x1025, 0x1246, "Acer Predator Helios 500", ALC299_FIXUP_PREDATOR_SPK),
 	SND_PCI_QUIRK(0x1025, 0x1247, "Acer vCopperbox", ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS),
 	SND_PCI_QUIRK(0x1025, 0x1248, "Acer Veriton N4660G", ALC269VC_FIXUP_ACER_MIC_NO_PRESENCE),
author maintainer
#50 lore raw

PATCH 50/110 hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <[email protected]>

commit 4c262801ea60c518b5bebc22a09f5b78b3147da2 upstream.

The existing code moves VF to the same namespace as the synthetic NIC during netvsc_register_vf(). But, if the synthetic device is moved to a new namespace after the VF registration, the VF won't be moved together.

To make the behavior more consistent, add a namespace check for synthetic NIC's NETDEV_REGISTER event (generated during its move), and move the VF if it is not in the same namespace.

---
 drivers/net/hyperv/netvsc_drv.c |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
drivers/net/hyperv/netvsc_drv.c +30 -0
@@ -2789,6 +2789,31 @@ static struct  hv_driver netvsc_drv = {
 	},
 };
 
+/* Set VF's namespace same as the synthetic NIC */
+static void netvsc_event_set_vf_ns(struct net_device *ndev)
+{
+	struct net_device_context *ndev_ctx = netdev_priv(ndev);
+	struct net_device *vf_netdev;
+	int ret;
+
+	vf_netdev = rtnl_dereference(ndev_ctx->vf_netdev);
+	if (!vf_netdev)
+		return;
+
+	if (!net_eq(dev_net(ndev), dev_net(vf_netdev))) {
+		ret = dev_change_net_namespace(vf_netdev, dev_net(ndev),
+					       "eth%d");
+		if (ret)
+			netdev_err(vf_netdev,
+				   "Cannot move to same namespace as %s: %d\n",
+				   ndev->name, ret);
+		else
+			netdev_info(vf_netdev,
+				    "Moved VF to namespace with: %s\n",
+				    ndev->name);
+	}
+}
+
 /*
  * On Hyper-V, every VF interface is matched with a corresponding
  * synthetic interface. The synthetic interface is presented first
@@ -2801,6 +2826,11 @@ static int netvsc_netdev_event(struct no
 	struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
 	int ret = 0;
 
+	if (event_dev->netdev_ops == &device_ops && event == NETDEV_REGISTER) {
+		netvsc_event_set_vf_ns(event_dev);
+		return NOTIFY_DONE;
+	}
+
 	ret = check_dev_is_matching_vf(event_dev);
 	if (ret != 0)
 		return NOTIFY_DONE;
author maintainer
#51 lore raw

PATCH 51/110 selinux: improve error checking in sel_write_load()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Moore <[email protected]>

[ Upstream commit 42c773238037c90b3302bf37a57ae3b5c3f6004a ]

Move our existing input sanity checking to the top of sel_write_load() and add a check to ensure the buffer size is non-zero.

Move a local variable initialization from the declaration to before it is used.

Minor style adjustments.

[cascardo: keep fsi initialization at its declaration point as it is used earlier]
---
 security/selinux/selinuxfs.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)
security/selinux/selinuxfs.c +14 -13
index d893c2280f595..7415f49a3d81e 100644
@@ -620,6 +620,13 @@ static ssize_t sel_write_load(struct file *file, const char __user *buf,
 	ssize_t length;
 	void *data = NULL;
 
+	/* no partial writes */
+	if (*ppos)
+		return -EINVAL;
+	/* no empty policies */
+	if (!count)
+		return -EINVAL;
+
 	mutex_lock(&fsi->state->policy_mutex);
 
 	length = avc_has_perm(&selinux_state,
@@ -628,26 +635,21 @@ static ssize_t sel_write_load(struct file *file, const char __user *buf,
 	if (length)
 		goto out;
 
-	/* No partial writes. */
-	length = -EINVAL;
-	if (*ppos != 0)
-		goto out;
-
-	length = -ENOMEM;
 	data = vmalloc(count);
-	if (!data)
+	if (!data) {
+		length = -ENOMEM;
 		goto out;
-
-	length = -EFAULT;
-	if (copy_from_user(data, buf, count) != 0)
+	}
+	if (copy_from_user(data, buf, count) != 0) {
+		length = -EFAULT;
 		goto out;
+	}
 
 	length = security_load_policy(fsi->state, data, count, &load_state);
 	if (length) {
 		pr_warn_ratelimited("SELinux: failed to load policy\n");
 		goto out;
 	}
-
 	length = sel_make_policy_nodes(fsi, load_state.policy);
 	if (length) {
 		selinux_policy_cancel(fsi->state, &load_state);
@@ -655,13 +657,12 @@ static ssize_t sel_write_load(struct file *file, const char __user *buf,
 	}
 
 	selinux_policy_commit(fsi->state, &load_state);
-
 	length = count;
-
 	audit_log(audit_context(), GFP_KERNEL, AUDIT_MAC_POLICY_LOAD,
 		"auid=%u ses=%u lsm=selinux res=1",
 		from_kuid(&init_user_ns, audit_get_loginuid(current)),
 		audit_get_sessionid(current));
+
 out:
 	mutex_unlock(&fsi->state->policy_mutex);
 	vfree(data);
Signature · 1 line
2.43.0
author maintainer
#52 lore raw

PATCH 52/110 serial: protect uart_port_dtr_rts() in uart_shutdown() too

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby (SUSE) <[email protected]>

[ Upstream commit 602babaa84d627923713acaf5f7e9a4369e77473 ]

Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part
3) added few uport == NULL checks. It added one to uart_shutdown(), so the commit assumes, uport can be NULL in there. But right after that protection, there is an unprotected "uart_port_dtr_rts(uport, false);" call. That is invoked only if HUPCL is set, so I assume that is the reason why we do not see lots of these reports.

Or it cannot be NULL at this point at all for some reason :P.

Until the above is investigated, stay on the safe side and move this dereference to the if too.

I got this inconsistency from Coverity under CID 1585130. Thanks.

[Adapted over commit 5701cb8bf50e ("tty: Call ->dtr_rts() parameter active consistently") not in the tree]

---
 drivers/tty/serial/serial_core.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/tty/serial/serial_core.c +9 -7
index c7adcf97e2a33..6d7d448d0fbf5 100644
@@ -286,14 +286,16 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 		/*
 		 * Turn off DTR and RTS early.
 		 */
-		if (uport && uart_console(uport) && tty) {
-			uport->cons->cflag = tty->termios.c_cflag;
-			uport->cons->ispeed = tty->termios.c_ispeed;
-			uport->cons->ospeed = tty->termios.c_ospeed;
-		}
+		if (uport) {
+			if (uart_console(uport) && tty) {
+				uport->cons->cflag = tty->termios.c_cflag;
+				uport->cons->ispeed = tty->termios.c_ispeed;
+				uport->cons->ospeed = tty->termios.c_ospeed;
+			}
 
-		if (!tty || C_HUPCL(tty))
-			uart_port_dtr_rts(uport, 0);
+			if (!tty || C_HUPCL(tty))
+				uart_port_dtr_rts(uport, 0);
+		}
 
 		uart_port_shutdown(port);
 	}
Signature · 1 line
2.43.0
author maintainer
#53 lore raw

PATCH 53/110 net: phy: dp83822: Fix reset pin definitions

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michel Alex <[email protected]>

commit de96f6a3003513c796bbe4e23210a446913f5c00 upstream.

This change fixes a rare issue where the PHY fails to detect a link due to incorrect reset behavior.

The SW_RESET definition was incorrectly assigned to bit 14, which is the Digital Restart bit according to the datasheet. This commit corrects SW_RESET to bit 15 and assigns DIG_RESTART to bit 14 as per the datasheet specifications.

The SW_RESET define is only used in the phy_reset function, which fully re-initializes the PHY after the reset is performed. The change in the bit definitions should not have any negative impact on the functionality of the PHY.

v2:
- added Fixes tag
- improved commit message

Fixes 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection")

Message-ID: <AS1P250MB0608A798661549BF83C4B43EA9462@AS1P250MB0608.EURP250.PROD.OUTLOOK.COM>

---
 drivers/net/phy/dp83822.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/phy/dp83822.c +2 -2
@@ -40,8 +40,8 @@
 /* Control Register 2 bits */
 #define DP83822_FX_ENABLE	BIT(14)
 
-#define DP83822_HW_RESET	BIT(15)
-#define DP83822_SW_RESET	BIT(14)
+#define DP83822_SW_RESET	BIT(15)
+#define DP83822_DIG_RESTART	BIT(14)
 
 /* PHY STS bits */
 #define DP83822_PHYSTS_DUPLEX			BIT(2)
author maintainer
#54 lore raw

PATCH 54/110 ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zichen Xie <[email protected]>

commit 49da1463c9e3d2082276c3e0e2a8b65a88711cd2 upstream.

A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check.
Add a NULL check for the returned pointer.

Fixes b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
---
 sound/soc/qcom/lpass-cpu.c |    2 ++
 1 file changed, 2 insertions(+)
sound/soc/qcom/lpass-cpu.c +2 -0
@@ -946,6 +946,8 @@ int asoc_qcom_lpass_cpu_platform_probe(s
 	/* Allocation for i2sctl regmap fields */
 	drvdata->i2sctl = devm_kzalloc(&pdev->dev, sizeof(struct lpaif_i2sctl),
 					GFP_KERNEL);
+	if (!drvdata->i2sctl)
+		return -ENOMEM;
 
 	/* Initialize bitfields for dai I2SCTL register */
 	ret = lpass_cpu_init_i2sctl_bitfields(dev, drvdata->i2sctl,
author maintainer
#55 lore raw

PATCH 55/110 arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: junhua huang <[email protected]>

commit ef08c0fadd8a17ebe429b85e23952dac3263ad34 upstream.

After we fixed the uprobe inst endian in aarch_be, the sparse check report the following warning info:

sparse warnings: (new ones prefixed by >>)

Quoted 2 lines
Quoted 2 lines

kernel/events/uprobes.c:223:25: sparse: sparse: restricted __le32 degrades to integer kernel/events/uprobes.c:574:56: sparse: sparse: incorrect type in argument 4 (different base types)

@@ expected unsigned int [addressable] [usertype] opcode @@ got restricted __le32 [usertype] @@
kernel/events/uprobes.c:574:56: sparse: expected unsigned int [addressable] [usertype] opcode
kernel/events/uprobes.c:574:56: sparse: got restricted __le32 [usertype]

Quoted 1 line
Quoted 1 line

kernel/events/uprobes.c:1483:32: sparse: sparse: incorrect type in initializer (different base types)

@@ expected unsigned int [usertype] insn @@ got restricted __le32 [usertype] @@
kernel/events/uprobes.c:1483:32: sparse: expected unsigned int [usertype] insn
kernel/events/uprobes.c:1483:32: sparse: got restricted __le32 [usertype]

use the __le32 to u32 for uprobe_opcode_t, to keep the same.

Fixes 60f07e22a73d ("arm64:uprobe fix the uprobe SWBP_INSN in big-endian")
---
 arch/arm64/include/asm/uprobes.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/include/asm/uprobes.h +1 -1
@@ -14,7 +14,7 @@
 #define UPROBE_SWBP_INSN_SIZE	AARCH64_INSN_SIZE
 #define UPROBE_XOL_SLOT_BYTES	AARCH64_INSN_SIZE
 
-typedef u32 uprobe_opcode_t;
+typedef __le32 uprobe_opcode_t;
 
 struct arch_uprobe_task {
 };
author maintainer
#56 lore raw

PATCH 56/110 xfrm: validate new SAs prefixlen using SA family when sel.family is unset

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <[email protected]>

[ Upstream commit 3f0ab59e6537c6a8f9e1b355b48f9c05a76e8563 ]

This expands the validation introduced in commit 07bf7908950a ("xfrm:
Validate address prefix lengths in the xfrm selector.")

syzbot created an SA with
usersa.sel.family = AF_UNSPEC
usersa.sel.prefixlen_s = 128
usersa.family = AF_INET

Because of the AF_UNSPEC selector, verify_newsa_info doesn't put limits on prefixlen_{s,d}. But then copy_from_user_state sets x->sel.family to usersa.family (AF_INET). Do the same conversion in verify_newsa_info before validating prefixlen_{s,d}, since that's how prefixlen is going to be used later on.

Reported-by [email protected]
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/xfrm/xfrm_user.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
net/xfrm/xfrm_user.c +5 -1
index 070946d093817..e28e49499713f 100644
@@ -149,6 +149,7 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 			     struct nlattr **attrs)
 {
 	int err;
+	u16 family = p->sel.family;
 
 	err = -EINVAL;
 	switch (p->family) {
@@ -167,7 +168,10 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 		goto out;
 	}
 
-	switch (p->sel.family) {
+	if (!family && !(p->flags & XFRM_STATE_AF_UNSPEC))
+		family = p->family;
+
+	switch (family) {
 	case AF_UNSPEC:
 		break;
 
Signature · 1 line
2.43.0
author maintainer
#57 lore raw

PATCH 57/110 selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Donet Tom <[email protected]>

[ Upstream commit 76503e1fa1a53ef041a120825d5ce81c7fe7bdd7 ]

The hmm2 double_map test was failing due to an incorrect buffer->mirror size. The buffer->mirror size was 6, while buffer->ptr size was 6 * PAGE_SIZE. The test failed because the kernel's copy_to_user function was attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the size of buffer->mirror was incorrect, copy_to_user failed.

This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.

Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0) # double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map

Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map

Fixes fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Cc Jérôme Glisse <[email protected]>
Cc Kees Cook <[email protected]>
Cc Mark Brown <[email protected]>
Cc Przemek Kitszel <[email protected]>
Cc Ritesh Harjani (IBM) <[email protected]>
Cc Shuah Khan <[email protected]>
Cc Ralph Campbell <[email protected]>
Cc Jason Gunthorpe <[email protected]>
---
 tools/testing/selftests/vm/hmm-tests.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/vm/hmm-tests.c +1 -1
index 426dccc08f906..738c34eb50afc 100644
@@ -1474,7 +1474,7 @@ TEST_F(hmm2, double_map)
 
 	buffer->fd = -1;
 	buffer->size = size;
-	buffer->mirror = malloc(npages);
+	buffer->mirror = malloc(size);
 	ASSERT_NE(buffer->mirror, NULL);
 
 	/* Reserve a range of addresses. */
Signature · 1 line
2.43.0
author maintainer
#58 lore raw

PATCH 58/110 cgroup: Fix potential overflow issue when checking max_depth

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiu Jianfeng <[email protected]>

[ Upstream commit 3cc4e13bb1617f6a13e5e6882465984148743cf4 ]

cgroup.max.depth is the maximum allowed descent depth below the current cgroup. If the actual descent depth is equal or larger, an attempt to create a new child cgroup will fail. However due to the cgroup->max_depth is of int type and having the default value INT_MAX, the condition 'level > cgroup->max_depth' will never be satisfied, and it will cause an overflow of the level after it reaches to INT_MAX.

Fix it by starting the level from 0 and using '>=' instead.

It's worth mentioning that this issue is unlikely to occur in reality, as it's impossible to have a depth of INT_MAX hierarchy, but should be be avoided logically.

Fixes 1a926e0bbab8 ("cgroup: implement hierarchy limits")
---
 kernel/cgroup/cgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/cgroup/cgroup.c +2 -2
index 66970b74106c8..e0fd62d56110a 100644
@@ -5437,7 +5437,7 @@ static bool cgroup_check_hierarchy_limits(struct cgroup *parent)
 {
 	struct cgroup *cgroup;
 	int ret = false;
-	int level = 1;
+	int level = 0;
 
 	lockdep_assert_held(&cgroup_mutex);
 
@@ -5445,7 +5445,7 @@ static bool cgroup_check_hierarchy_limits(struct cgroup *parent)
 		if (cgroup->nr_descendants >= cgroup->max_descendants)
 			goto fail;
 
-		if (level > cgroup->max_depth)
+		if (level >= cgroup->max_depth)
 			goto fail;
 
 		level++;
Signature · 1 line
2.43.0
author maintainer
#59 lore raw

PATCH 59/110 mac80211: MAC80211_MESSAGE_TRACING should depend on TRACING

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit b3e046c31441d182b954fc2f57b2dc38c71ad4bc ]

When tracing is disabled, there is no point in asking the user about enabling tracing of all mac80211 debug messages.

---
 net/mac80211/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/Kconfig +1 -1
index 51ec8256b7fa9..8278221a36a1d 100644
@@ -86,7 +86,7 @@ config MAC80211_DEBUGFS
 
 config MAC80211_MESSAGE_TRACING
 	bool "Trace all mac80211 debug messages"
-	depends on MAC80211
+	depends on MAC80211 && TRACING
 	help
 	  Select this option to have mac80211 register the
 	  mac80211_msg trace subsystem with tracepoints to
Signature · 1 line
2.43.0
author maintainer
#60 lore raw

PATCH 60/110 wifi: mac80211: skip non-uploaded keys in ieee80211_iter_keys

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <[email protected]>

[ Upstream commit 52009b419355195912a628d0a9847922e90c348c ]

Sync iterator conditions with ieee80211_iter_keys_rcu.

Fixes 830af02f24fb ("mac80211: allow driver to iterate keys")
---
 net/mac80211/key.c | 42 +++++++++++++++++++++++++-----------------
 1 file changed, 25 insertions(+), 17 deletions(-)
net/mac80211/key.c +25 -17
index 6b089594a9f3f..3df4695caef6c 100644
@@ -918,6 +918,26 @@ void ieee80211_reenable_keys(struct ieee80211_sub_if_data *sdata)
 	mutex_unlock(&sdata->local->key_mtx);
 }
 
+static void
+ieee80211_key_iter(struct ieee80211_hw *hw,
+		   struct ieee80211_vif *vif,
+		   struct ieee80211_key *key,
+		   void (*iter)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta,
+				struct ieee80211_key_conf *key,
+				void *data),
+		   void *iter_data)
+{
+	/* skip keys of station in removal process */
+	if (key->sta && key->sta->removed)
+		return;
+	if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
+		return;
+	iter(hw, vif, key->sta ? &key->sta->sta : NULL,
+	     &key->conf, iter_data);
+}
+
 void ieee80211_iter_keys(struct ieee80211_hw *hw,
 			 struct ieee80211_vif *vif,
 			 void (*iter)(struct ieee80211_hw *hw,
@@ -937,16 +957,13 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw,
 	if (vif) {
 		sdata = vif_to_sdata(vif);
 		list_for_each_entry_safe(key, tmp, &sdata->key_list, list)
-			iter(hw, &sdata->vif,
-			     key->sta ? &key->sta->sta : NULL,
-			     &key->conf, iter_data);
+			ieee80211_key_iter(hw, vif, key, iter, iter_data);
 	} else {
 		list_for_each_entry(sdata, &local->interfaces, list)
 			list_for_each_entry_safe(key, tmp,
 						 &sdata->key_list, list)
-				iter(hw, &sdata->vif,
-				     key->sta ? &key->sta->sta : NULL,
-				     &key->conf, iter_data);
+				ieee80211_key_iter(hw, &sdata->vif, key,
+						   iter, iter_data);
 	}
 	mutex_unlock(&local->key_mtx);
 }
@@ -964,17 +981,8 @@ _ieee80211_iter_keys_rcu(struct ieee80211_hw *hw,
 {
 	struct ieee80211_key *key;
 
-	list_for_each_entry_rcu(key, &sdata->key_list, list) {
-		/* skip keys of station in removal process */
-		if (key->sta && key->sta->removed)
-			continue;
-		if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
-			continue;
-
-		iter(hw, &sdata->vif,
-		     key->sta ? &key->sta->sta : NULL,
-		     &key->conf, iter_data);
-	}
+	list_for_each_entry_rcu(key, &sdata->key_list, list)
+		ieee80211_key_iter(hw, &sdata->vif, key, iter, iter_data);
 }
 
 void ieee80211_iter_keys_rcu(struct ieee80211_hw *hw,
Signature · 1 line
2.43.0
author maintainer
#61 lore raw

PATCH 61/110 wifi: brcm80211: BRCM_TRACING should depend on TRACING

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit b73b2069528f90ec49d5fa1010a759baa2c2be05 ]

When tracing is disabled, there is no point in asking the user about enabling Broadcom wireless device tracing.

---
 drivers/net/wireless/broadcom/brcm80211/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/broadcom/brcm80211/Kconfig +1 -0
index 5bf2318763c55..8f51099e15c90 100644
@@ -23,6 +23,7 @@ source "drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig"
 config BRCM_TRACING
 	bool "Broadcom device tracing"
 	depends on BRCMSMAC || BRCMFMAC
+	depends on TRACING
 	help
 	  If you say Y here, the Broadcom wireless drivers will register
 	  with ftrace to dump event information into the trace ringbuffer.
Signature · 1 line
2.43.0
author maintainer
#62 lore raw

PATCH 62/110 RDMA/cxgb4: Dump vendor specific QP details

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <[email protected]>

[ Upstream commit 89f8c6f197f480fe05edf91eb9359d5425869d04 ]

Restore the missing functionality to dump vendor specific QP details, which was mistakenly removed in the commit mentioned in Fixes line.

---
 drivers/infiniband/hw/cxgb4/provider.c | 1 +
 1 file changed, 1 insertion(+)
drivers/infiniband/hw/cxgb4/provider.c +1 -0
index 8138c57a1e43b..2824511e20ade 100644
@@ -472,6 +472,7 @@ static const struct ib_device_ops c4iw_dev_ops = {
 	.fill_res_cq_entry = c4iw_fill_res_cq_entry,
 	.fill_res_cm_id_entry = c4iw_fill_res_cm_id_entry,
 	.fill_res_mr_entry = c4iw_fill_res_mr_entry,
+	.fill_res_qp_entry = c4iw_fill_res_qp_entry,
 	.get_dev_fw_str = get_dev_fw_str,
 	.get_dma_mr = c4iw_get_dma_mr,
 	.get_hw_stats = c4iw_get_mib,
Signature · 1 line
2.43.0
author maintainer
#63 lore raw

PATCH 63/110 RDMA/mlx5: Round max_rd_atomic/max_dest_rd_atomic up instead of down

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Patrisious Haddad <[email protected]>

[ Upstream commit 78ed28e08e74da6265e49e19206e1bcb8b9a7f0d ]

After the cited commit below max_dest_rd_atomic and max_rd_atomic values are being rounded down to the next power of 2. As opposed to the old behavior and mlx4 driver where they used to be rounded up instead.

In order to stay consistent with older code and other drivers, revert to using fls round function which rounds up to the next power of 2.

---
 drivers/infiniband/hw/mlx5/qp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx5/qp.c +2 -2
index e3cc856e70e5d..e0db91d1e7492 100644
@@ -3940,14 +3940,14 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
 		MLX5_SET(qpc, qpc, retry_count, attr->retry_cnt);
 
 	if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC && attr->max_rd_atomic)
-		MLX5_SET(qpc, qpc, log_sra_max, ilog2(attr->max_rd_atomic));
+		MLX5_SET(qpc, qpc, log_sra_max, fls(attr->max_rd_atomic - 1));
 
 	if (attr_mask & IB_QP_SQ_PSN)
 		MLX5_SET(qpc, qpc, next_send_psn, attr->sq_psn);
 
 	if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC && attr->max_dest_rd_atomic)
 		MLX5_SET(qpc, qpc, log_rra_max,
-			 ilog2(attr->max_dest_rd_atomic));
+			 fls(attr->max_dest_rd_atomic - 1));
 
 	if (attr_mask & (IB_QP_ACCESS_FLAGS | IB_QP_MAX_DEST_RD_ATOMIC)) {
 		err = set_qpc_atomic_flags(qp, attr, attr_mask, qpc);
Signature · 1 line
2.43.0
author maintainer
#64 lore raw

PATCH 64/110 RDMA/bnxt_re: synchronize the qp-handle table array

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Selvin Xavier <[email protected]>

[ Upstream commit 76d3ddff7153cc0bcc14a63798d19f5d0693ea71 ]

There is a race between the CREQ tasklet and destroy qp when accessing the qp-handle table. There is a chance of reading a valid qp-handle in the CREQ tasklet handler while the QP is already moving ahead with the destruction.

Fixing this race by implementing a table-lock to synchronize the access.

Fixes f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
---
 drivers/infiniband/hw/bnxt_re/qplib_fp.c   |  4 ++++
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 13 +++++++++----
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.h |  2 ++
 3 files changed, 15 insertions(+), 4 deletions(-)
drivers/infiniband/hw/bnxt_re/qplib_fp.c +4 -0
index d44b6a5c90b57..5f79371a1386f 100644
@@ -1476,9 +1476,11 @@ int bnxt_qplib_destroy_qp(struct bnxt_qplib_res *res,
 	u32 tbl_indx;
 	int rc;
 
+	spin_lock_bh(&rcfw->tbl_lock);
 	tbl_indx = map_qp_id_to_tbl_indx(qp->id, rcfw);
 	rcfw->qp_tbl[tbl_indx].qp_id = BNXT_QPLIB_QP_ID_INVALID;
 	rcfw->qp_tbl[tbl_indx].qp_handle = NULL;
+	spin_unlock_bh(&rcfw->tbl_lock);
 
 	RCFW_CMD_PREP(req, DESTROY_QP, cmd_flags);
 
@@ -1486,8 +1488,10 @@ int bnxt_qplib_destroy_qp(struct bnxt_qplib_res *res,
 	rc = bnxt_qplib_rcfw_send_message(rcfw, (void *)&req,
 					  (void *)&resp, NULL, 0);
 	if (rc) {
+		spin_lock_bh(&rcfw->tbl_lock);
 		rcfw->qp_tbl[tbl_indx].qp_id = qp->id;
 		rcfw->qp_tbl[tbl_indx].qp_handle = qp;
+		spin_unlock_bh(&rcfw->tbl_lock);
 		return rc;
 	}
 
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c +9 -4
index 148f2c51a9460..0d61a1563f480 100644
@@ -316,17 +316,21 @@ static int bnxt_qplib_process_qp_event(struct bnxt_qplib_rcfw *rcfw,
 	case CREQ_QP_EVENT_EVENT_QP_ERROR_NOTIFICATION:
 		err_event = (struct creq_qp_error_notification *)qp_event;
 		qp_id = le32_to_cpu(err_event->xid);
+		spin_lock(&rcfw->tbl_lock);
 		tbl_indx = map_qp_id_to_tbl_indx(qp_id, rcfw);
 		qp = rcfw->qp_tbl[tbl_indx].qp_handle;
+		if (!qp) {
+			spin_unlock(&rcfw->tbl_lock);
+			break;
+		}
+		bnxt_qplib_mark_qp_error(qp);
+		rc = rcfw->creq.aeq_handler(rcfw, qp_event, qp);
+		spin_unlock(&rcfw->tbl_lock);
 		dev_dbg(&pdev->dev, "Received QP error notification\n");
 		dev_dbg(&pdev->dev,
 			"qpid 0x%x, req_err=0x%x, resp_err=0x%x\n",
 			qp_id, err_event->req_err_state_reason,
 			err_event->res_err_state_reason);
-		if (!qp)
-			break;
-		bnxt_qplib_mark_qp_error(qp);
-		rc = rcfw->creq.aeq_handler(rcfw, qp_event, qp);
 		break;
 	default:
 		/*
@@ -627,6 +631,7 @@ int bnxt_qplib_alloc_rcfw_channel(struct bnxt_qplib_res *res,
 			       GFP_KERNEL);
 	if (!rcfw->qp_tbl)
 		goto fail;
+	spin_lock_init(&rcfw->tbl_lock);
 
 	return 0;
 
drivers/infiniband/hw/bnxt_re/qplib_rcfw.h +2 -0
index 7df7170c80e06..69aa1a52c7f8d 100644
@@ -184,6 +184,8 @@ struct bnxt_qplib_rcfw {
 	struct bnxt_qplib_crsqe		*crsqe_tbl;
 	int qp_tbl_size;
 	struct bnxt_qplib_qp_node *qp_tbl;
+	/* To synchronize the qp-handle hash table */
+	spinlock_t			tbl_lock;
 	u64 oos_prev;
 	u32 init_oos_stats;
 	u32 cmdq_depth;
Signature · 1 line
2.43.0
author maintainer
#65 lore raw

PATCH 65/110 mac80211: do drv_reconfig_complete() before restarting all

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 13dee10b30c058ee2c58c5da00339cc0d4201aa6 ]

When we reconfigure, the driver might do some things to complete the reconfiguration. It's strange and could be broken in some cases because we restart other works (e.g. remain-on-channel and TX) before this happens, yet only start queues later.

Change this to do the reconfig complete when reconfiguration is actually complete, not when we've already started doing other things again.

For iwlwifi, this should fix a race where the reconfig can race with TX, for ath10k and ath11k that also use this it won't make a difference because they just start queues there, and mac80211 also stopped the queues and will restart them later as before.

Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")

---
 net/mac80211/util.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
net/mac80211/util.c +7 -7
index 7fa6efa8b83c1..997ce9c64336a 100644
@@ -2632,6 +2632,13 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		mutex_unlock(&local->sta_mtx);
 	}
 
+	/*
+	 * If this is for hw restart things are still running.
+	 * We may want to change that later, however.
+	 */
+	if (local->open_count && (!suspended || reconfig_due_to_wowlan))
+		drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_RESTART);
+
 	if (local->in_reconfig) {
 		local->in_reconfig = false;
 		barrier();
@@ -2650,13 +2657,6 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
 					false);
 
-	/*
-	 * If this is for hw restart things are still running.
-	 * We may want to change that later, however.
-	 */
-	if (local->open_count && (!suspended || reconfig_due_to_wowlan))
-		drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_RESTART);
-
 	if (!suspended)
 		return 0;
 
Signature · 1 line
2.43.0
author maintainer
#66 lore raw

PATCH 66/110 mac80211: Add support to trigger sta disconnect on hardware restart

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Youghandhar Chintala <[email protected]>

[ Upstream commit 7d352ccf1e9935b5222ca84e8baeb07a0c8f94b9 ]

Currently in case of target hardware restart, we just reconfig and re-enable the security keys and enable the network queues to start data traffic back from where it was interrupted.

Many ath10k wifi chipsets have sequence numbers for the data packets assigned by firmware and the mac sequence number will restart from zero after target hardware restart leading to mismatch in the sequence number expected by the remote peer vs the sequence number of the frame sent by the target firmware.

This mismatch in sequence number will cause out-of-order packets on the remote peer and all the frames sent by the device are dropped until we reach the sequence number which was sent before we restarted the target hardware

In order to fix this, we trigger a sta disconnect, in case of target hw restart. After this there will be a fresh connection and thereby avoiding the dropping of frames by remote peer.

The right fix would be to pull the entire data path into the host which is not feasible or would need lots of complex changes and will still be inefficient.

Tested on ath10k using WCN3990, QCA6174

Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")

---
 include/net/mac80211.h     | 10 ++++++++++
 net/mac80211/ieee80211_i.h |  3 +++
 net/mac80211/mlme.c        | 12 ++++++++++++
 net/mac80211/util.c        | 33 ++++++++++++++++++++++++++++++---
 4 files changed, 55 insertions(+), 3 deletions(-)
include/net/mac80211.h +10 -0
index 6ff49c13717bb..8f91609f928c1 100644
@@ -5899,6 +5899,16 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif);
  */
 void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
 
+/**
+ * ieee80211_hw_restart_disconnect - disconnect from AP after
+ * hardware restart
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Instructs mac80211 to disconnect from the AP after
+ * hardware restart.
+ */
+void ieee80211_hw_restart_disconnect(struct ieee80211_vif *vif);
+
 /**
  * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
  *	rssi threshold triggered
net/mac80211/ieee80211_i.h +3 -0
index 782ff56c5aff1..2da452ec53288 100644
@@ -762,6 +762,8 @@ struct ieee80211_if_mesh {
  *	back to wireless media and to the local net stack.
  * @IEEE80211_SDATA_DISCONNECT_RESUME: Disconnect after resume.
  * @IEEE80211_SDATA_IN_DRIVER: indicates interface was added to driver
+ * @IEEE80211_SDATA_DISCONNECT_HW_RESTART: Disconnect after hardware restart
+ *  recovery
  */
 enum ieee80211_sub_if_data_flags {
 	IEEE80211_SDATA_ALLMULTI		= BIT(0),
@@ -769,6 +771,7 @@ enum ieee80211_sub_if_data_flags {
 	IEEE80211_SDATA_DONT_BRIDGE_PACKETS	= BIT(3),
 	IEEE80211_SDATA_DISCONNECT_RESUME	= BIT(4),
 	IEEE80211_SDATA_IN_DRIVER		= BIT(5),
+	IEEE80211_SDATA_DISCONNECT_HW_RESTART	= BIT(6),
 };
 
 /**
net/mac80211/mlme.c +12 -0
index c52b8eb7fb8a2..0dd50044bd813 100644
@@ -4799,6 +4799,18 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
 		sdata_unlock(sdata);
 		return;
 	}
+
+	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) {
+		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART;
+		mlme_dbg(sdata, "driver requested disconnect after hardware restart\n");
+		ieee80211_sta_connection_lost(sdata,
+					      ifmgd->associated->bssid,
+					      WLAN_REASON_UNSPECIFIED,
+					      true);
+		sdata_unlock(sdata);
+		return;
+	}
+
 	sdata_unlock(sdata);
 }
 #endif
net/mac80211/util.c +30 -3
index 997ce9c64336a..e49355cbb1ce1 100644
@@ -2290,6 +2290,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	struct cfg80211_sched_scan_request *sched_scan_req;
 	bool sched_scan_stopped = false;
 	bool suspended = local->suspended;
+	bool in_reconfig = false;
 
 	/* nothing to do if HW shouldn't run */
 	if (!local->open_count)
@@ -2640,6 +2641,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_RESTART);
 
 	if (local->in_reconfig) {
+		in_reconfig = local->in_reconfig;
 		local->in_reconfig = false;
 		barrier();
 
@@ -2657,6 +2659,15 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
 					false);
 
+	if (in_reconfig) {
+		list_for_each_entry(sdata, &local->interfaces, list) {
+			if (!ieee80211_sdata_running(sdata))
+				continue;
+			if (sdata->vif.type == NL80211_IFTYPE_STATION)
+				ieee80211_sta_restart(sdata);
+		}
+	}
+
 	if (!suspended)
 		return 0;
 
@@ -2686,7 +2697,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	return 0;
 }
 
-void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
+static void ieee80211_reconfig_disconnect(struct ieee80211_vif *vif, u8 flag)
 {
 	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_local *local;
@@ -2698,19 +2709,35 @@ void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
 	sdata = vif_to_sdata(vif);
 	local = sdata->local;
 
-	if (WARN_ON(!local->resuming))
+	if (WARN_ON(flag & IEEE80211_SDATA_DISCONNECT_RESUME &&
+		    !local->resuming))
+		return;
+
+	if (WARN_ON(flag & IEEE80211_SDATA_DISCONNECT_HW_RESTART &&
+		    !local->in_reconfig))
 		return;
 
 	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION))
 		return;
 
-	sdata->flags |= IEEE80211_SDATA_DISCONNECT_RESUME;
+	sdata->flags |= flag;
 
 	mutex_lock(&local->key_mtx);
 	list_for_each_entry(key, &sdata->key_list, list)
 		key->flags |= KEY_FLAG_TAINTED;
 	mutex_unlock(&local->key_mtx);
 }
+
+void ieee80211_hw_restart_disconnect(struct ieee80211_vif *vif)
+{
+	ieee80211_reconfig_disconnect(vif, IEEE80211_SDATA_DISCONNECT_HW_RESTART);
+}
+EXPORT_SYMBOL_GPL(ieee80211_hw_restart_disconnect);
+
+void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
+{
+	ieee80211_reconfig_disconnect(vif, IEEE80211_SDATA_DISCONNECT_RESUME);
+}
 EXPORT_SYMBOL_GPL(ieee80211_resume_disconnect);
 
 void ieee80211_recalc_smps(struct ieee80211_sub_if_data *sdata)
Signature · 1 line
2.43.0
author maintainer
#67 lore raw

PATCH 67/110 wifi: iwlwifi: mvm: disconnect station vifs if recovery failed

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <[email protected]>

[ Upstream commit e50a88e5cb8792cc416866496288c5f4d1eb4b1f ]

This will allow to reconnect immediately instead of leaving the connection in a limbo state.

Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()")

---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/fw.c +13 -1
index 793208d99b5f9..594c88a9ac496 100644
@@ -1251,6 +1251,13 @@ static void iwl_mvm_lari_cfg(struct iwl_mvm *mvm)
 }
 #endif /* CONFIG_ACPI */
 
+static void iwl_mvm_disconnect_iterator(void *data, u8 *mac,
+					struct ieee80211_vif *vif)
+{
+	if (vif->type == NL80211_IFTYPE_STATION)
+		ieee80211_hw_restart_disconnect(vif);
+}
+
 void iwl_mvm_send_recovery_cmd(struct iwl_mvm *mvm, u32 flags)
 {
 	u32 error_log_size = mvm->fw->ucode_capa.error_log_size;
@@ -1295,10 +1302,15 @@ void iwl_mvm_send_recovery_cmd(struct iwl_mvm *mvm, u32 flags)
 	/* skb respond is only relevant in ERROR_RECOVERY_UPDATE_DB */
 	if (flags & ERROR_RECOVERY_UPDATE_DB) {
 		resp = le32_to_cpu(*(__le32 *)host_cmd.resp_pkt->data);
-		if (resp)
+		if (resp) {
 			IWL_ERR(mvm,
 				"Failed to send recovery cmd blob was invalid %d\n",
 				resp);
+
+			ieee80211_iterate_interfaces(mvm->hw, 0,
+						     iwl_mvm_disconnect_iterator,
+						     mvm);
+		}
 	}
 }
 
Signature · 1 line
2.43.0
author maintainer
#68 lore raw

PATCH 68/110 wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Gabay <[email protected]>

[ Upstream commit 07a6e3b78a65f4b2796a8d0d4adb1a15a81edead ]

1. The size of the response packet is not validated.
2. The response buffer is not freed.

Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer.

---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/net/wireless/intel/iwlwifi/mvm/fw.c +4 -6
index 594c88a9ac496..553117e8fdd90 100644
@@ -1261,8 +1261,8 @@ static void iwl_mvm_disconnect_iterator(void *data, u8 *mac,
 void iwl_mvm_send_recovery_cmd(struct iwl_mvm *mvm, u32 flags)
 {
 	u32 error_log_size = mvm->fw->ucode_capa.error_log_size;
+	u32 status = 0;
 	int ret;
-	u32 resp;
 
 	struct iwl_fw_error_recovery_cmd recovery_cmd = {
 		.flags = cpu_to_le32(flags),
@@ -1270,7 +1270,6 @@ void iwl_mvm_send_recovery_cmd(struct iwl_mvm *mvm, u32 flags)
 	};
 	struct iwl_host_cmd host_cmd = {
 		.id = WIDE_ID(SYSTEM_GROUP, FW_ERROR_RECOVERY_CMD),
-		.flags = CMD_WANT_SKB,
 		.data = {&recovery_cmd, },
 		.len = {sizeof(recovery_cmd), },
 	};
@@ -1290,7 +1289,7 @@ void iwl_mvm_send_recovery_cmd(struct iwl_mvm *mvm, u32 flags)
 		recovery_cmd.buf_size = cpu_to_le32(error_log_size);
 	}
 
-	ret = iwl_mvm_send_cmd(mvm, &host_cmd);
+	ret = iwl_mvm_send_cmd_status(mvm, &host_cmd, &status);
 	kfree(mvm->error_recovery_buf);
 	mvm->error_recovery_buf = NULL;
 
@@ -1301,11 +1300,10 @@ void iwl_mvm_send_recovery_cmd(struct iwl_mvm *mvm, u32 flags)
 
 	/* skb respond is only relevant in ERROR_RECOVERY_UPDATE_DB */
 	if (flags & ERROR_RECOVERY_UPDATE_DB) {
-		resp = le32_to_cpu(*(__le32 *)host_cmd.resp_pkt->data);
-		if (resp) {
+		if (status) {
 			IWL_ERR(mvm,
 				"Failed to send recovery cmd blob was invalid %d\n",
-				resp);
+				status);
 
 			ieee80211_iterate_interfaces(mvm->hw, 0,
 						     iwl_mvm_disconnect_iterator,
Signature · 1 line
2.43.0
author maintainer
#69 lore raw

PATCH 69/110 ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <[email protected]>

[ Upstream commit d221b844ee79823ffc29b7badc4010bdb0960224 ]

If devm_gpiod_get_optional() fails, we need to disable previously enabled regulators, as done in the other error handling path of the function.

Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.

This behavior is the same as the one already in the .remove() function.

---
 sound/soc/codecs/cs42l51.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
sound/soc/codecs/cs42l51.c +5 -2
index 4b026e1c3fe3e..09445db29aa1f 100644
@@ -754,8 +754,10 @@ int cs42l51_probe(struct device *dev, struct regmap *regmap)
 
 	cs42l51->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 						      GPIOD_OUT_LOW);
-	if (IS_ERR(cs42l51->reset_gpio))
-		return PTR_ERR(cs42l51->reset_gpio);
+	if (IS_ERR(cs42l51->reset_gpio)) {
+		ret = PTR_ERR(cs42l51->reset_gpio);
+		goto error;
+	}
 
 	if (cs42l51->reset_gpio) {
 		dev_dbg(dev, "Release reset gpio\n");
@@ -787,6 +789,7 @@ int cs42l51_probe(struct device *dev, struct regmap *regmap)
 	return 0;
 
 error:
+	gpiod_set_value_cansleep(cs42l51->reset_gpio, 1);
 	regulator_bulk_disable(ARRAY_SIZE(cs42l51->supplies),
 			       cs42l51->supplies);
 	return ret;
Signature · 1 line
2.43.0
author maintainer
#70 lore raw

PATCH 70/110 igb: Disable threaded IRQ for igb_msix_other

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wander Lairson Costa <[email protected]>

[ Upstream commit 338c4d3902feb5be49bfda530a72c7ab860e2c9f ]

During testing of SR-IOV, Red Hat QE encountered an issue where the ip link up command intermittently fails for the igbvf interfaces when using the PREEMPT_RT variant. Investigation revealed that e1000_write_posted_mbx returns an error due to the lack of an ACK from e1000_poll_for_ack.

The underlying issue arises from the fact that IRQs are threaded by default under PREEMPT_RT. While the exact hardware details are not available, it appears that the IRQ handled by igb_msix_other must be processed before e1000_poll_for_ack times out. However, e1000_write_posted_mbx is called with preemption disabled, leading to a scenario where the IRQ is serviced only after the failure of e1000_write_posted_mbx.

To resolve this, we set IRQF_NO_THREAD for the affected interrupt, ensuring that the kernel handles it immediately, thereby preventing the aforementioned error.

Reproducer:

    #!/bin/bash

    # echo 2 > /sys/class/net/ens14f0/device/sriov_numvfs
    ipaddr_vlan=3
    nic_test=ens14f0
    vf=${nic_test}v0

    while true; do
	    ip link set ${nic_test} mtu 1500
	    ip link set ${vf} mtu 1500
	    ip link set $vf up
	    ip link set ${nic_test} vf 0 vlan ${ipaddr_vlan}
	    ip addr add 172.30.${ipaddr_vlan}.1/24 dev ${vf}
	    ip addr add 2021:db8:${ipaddr_vlan}::1/64 dev ${vf}
	    if ! ip link show $vf | grep 'state UP'; then
		    echo 'Error found'
		    break
	    fi
	    ip link set $vf down
    done
---
 drivers/net/ethernet/intel/igb/igb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/igb/igb_main.c +1 -1
index 17cdda3fe415a..e1936aa94077b 100644
@@ -936,7 +936,7 @@ static int igb_request_msix(struct igb_adapter *adapter)
 	int i, err = 0, vector = 0, free_vector = 0;
 
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  igb_msix_other, 0, netdev->name, adapter);
+			  igb_msix_other, IRQF_NO_THREAD, netdev->name, adapter);
 	if (err)
 		goto err_out;
 
Signature · 1 line
2.43.0
author maintainer
#71 lore raw

PATCH 71/110 ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <[email protected]>

[ Upstream commit ad4a3ca6a8e886f6491910a3ae5d53595e40597d ]

There are code paths from which the function is called without holding the RCU read lock, resulting in a suspicious RCU usage warning [1].

Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire the RCU read lock before calling l3mdev_master_upper_ifindex_by_index_rcu().

[1]
WARNING: suspicious RCU usage 6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60

stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 <TASK>
 dump_stack_lvl+0xba/0x110
 lockdep_rcu_suspicious.cold+0x4f/0xd6
 dev_get_by_index_rcu+0x1d3/0x210
 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0
 ip_tunnel_bind_dev+0x72f/0xa00
 ip_tunnel_newlink+0x368/0x7a0
 ipgre_newlink+0x14c/0x170
 __rtnl_newlink+0x1173/0x19c0
 rtnl_newlink+0x6c/0xa0
 rtnetlink_rcv_msg+0x3cc/0xf60
 netlink_rcv_skb+0x171/0x450
 netlink_unicast+0x539/0x7f0
 netlink_sendmsg+0x8c1/0xd80
 ____sys_sendmsg+0x8f9/0xc20
 ___sys_sendmsg+0x197/0x1e0
 __sys_sendmsg+0x122/0x1f0
 do_syscall_64+0xbb/0x1d0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes db53cd3d88dc ("net: Handle l3mdev in ip_tunnel_init_flow")
---
 include/net/ip_tunnels.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/net/ip_tunnels.h +1 -1
index f6cb68c2beadf..cedf72924f19e 100644
@@ -247,7 +247,7 @@ static inline void ip_tunnel_init_flow(struct flowi4 *fl4,
 	memset(fl4, 0, sizeof(*fl4));
 
 	if (oif) {
-		fl4->flowi4_l3mdev = l3mdev_master_upper_ifindex_by_index_rcu(net, oif);
+		fl4->flowi4_l3mdev = l3mdev_master_upper_ifindex_by_index(net, oif);
 		/* Legacy VRF/l3mdev use case */
 		fl4->flowi4_oif = fl4->flowi4_l3mdev ? 0 : oif;
 	}
Signature · 1 line
2.43.0
author maintainer
#72 lore raw

PATCH 72/110 gtp: allow -1 to be specified as file description from userspace

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 7515e37bce5c428a56a9b04ea7e96b3f53f17150 ]

Existing user space applications maintained by the Osmocom project are breaking since a recent fix that addresses incorrect error checking.

Restore operation for user space programs that specify -1 as file descriptor to skip GTPv0 or GTPv1 only sockets.

---
 drivers/net/gtp.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)
drivers/net/gtp.c +13 -9
index 24cb7b97e4fcc..42839cb853f83 100644
@@ -842,20 +842,24 @@ static int gtp_encap_enable(struct gtp_dev *gtp, struct nlattr *data[])
 	unsigned int role = GTP_ROLE_GGSN;
 
 	if (data[IFLA_GTP_FD0]) {
-		u32 fd0 = nla_get_u32(data[IFLA_GTP_FD0]);
+		int fd0 = nla_get_u32(data[IFLA_GTP_FD0]);
 
-		sk0 = gtp_encap_enable_socket(fd0, UDP_ENCAP_GTP0, gtp);
-		if (IS_ERR(sk0))
-			return PTR_ERR(sk0);
+		if (fd0 >= 0) {
+			sk0 = gtp_encap_enable_socket(fd0, UDP_ENCAP_GTP0, gtp);
+			if (IS_ERR(sk0))
+				return PTR_ERR(sk0);
+		}
 	}
 
 	if (data[IFLA_GTP_FD1]) {
-		u32 fd1 = nla_get_u32(data[IFLA_GTP_FD1]);
+		int fd1 = nla_get_u32(data[IFLA_GTP_FD1]);
 
-		sk1u = gtp_encap_enable_socket(fd1, UDP_ENCAP_GTP1U, gtp);
-		if (IS_ERR(sk1u)) {
-			gtp_encap_disable_sock(sk0);
-			return PTR_ERR(sk1u);
+		if (fd1 >= 0) {
+			sk1u = gtp_encap_enable_socket(fd1, UDP_ENCAP_GTP1U, gtp);
+			if (IS_ERR(sk1u)) {
+				gtp_encap_disable_sock(sk0);
+				return PTR_ERR(sk1u);
+			}
 		}
 	}
 
Signature · 1 line
2.43.0
author maintainer
#73 lore raw

PATCH 73/110 net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pedro Tammela <[email protected]>

[ Upstream commit 2e95c4384438adeaa772caa560244b1a2efef816 ]

In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff:
Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer.

In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT).

In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop.

Fixes 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop")
 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
---
 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sched/sch_api.c +1 -1
index d0e4845ea7018..b4e405676600f 100644
@@ -780,7 +780,7 @@ void qdisc_tree_reduce_backlog(struct Qdisc *sch, int n, int len)
 	drops = max_t(int, n, 0);
 	rcu_read_lock();
 	while ((parentid = sch->parent)) {
-		if (TC_H_MAJ(parentid) == TC_H_MAJ(TC_H_INGRESS))
+		if (parentid == TC_H_ROOT)
 			break;
 
 		if (sch->flags & TCQ_F_NOPARENT)
Signature · 1 line
2.43.0
author maintainer
#74 lore raw

PATCH 74/110 bpf: Fix out-of-bounds write in trie_get_next_key()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Byeonguk Jeong <[email protected]>

[ Upstream commit 13400ac8fb80c57c2bfb12ebd35ee121ce9b4d21 ]

trie_get_next_key() allocates a node stack with size trie->max_prefixlen, while it writes (trie->max_prefixlen + 1) nodes to the stack when it has full paths from the root to leaves. For example, consider a trie with max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ... 0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with .prefixlen = 8 make 9 nodes be written on the node stack with size 8.

---
 kernel/bpf/lpm_trie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/bpf/lpm_trie.c +1 -1
index 3c2d8722d45b3..8370b391f1d6c 100644
@@ -655,7 +655,7 @@ static int trie_get_next_key(struct bpf_map *map, void *_key, void *_next_key)
 	if (!key || key->prefixlen > trie->max_prefixlen)
 		goto find_leftmost;
 
-	node_stack = kmalloc_array(trie->max_prefixlen,
+	node_stack = kmalloc_array(trie->max_prefixlen + 1,
 				   sizeof(struct lpm_trie_node *),
 				   GFP_ATOMIC | __GFP_NOWARN);
 	if (!node_stack)
Signature · 1 line
2.43.0
author maintainer
#75 lore raw

PATCH 75/110 net: support ip generic csum processing in skb_csum_hwoffload_help

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 62fafcd63139920eb25b3fbf154177ce3e6f3232 ]

NETIF_F_IP|IPV6_CSUM feature flag indicates UDP and TCP csum offload while NETIF_F_HW_CSUM feature flag indicates ip generic csum offload for HW, which includes not only for TCP/UDP csum, but also for other protocols' csum like GRE's.

However, in skb_csum_hwoffload_help() it only checks features against NETIF_F_CSUM_MASK(NETIF_F_HW|IP|IPV6_CSUM). So if it's a non TCP/UDP packet and the features doesn't support NETIF_F_HW_CSUM, but supports NETIF_F_IP|IPV6_CSUM only, it would still return 0 and leave the HW to do csum.

This patch is to support ip generic csum processing by checking NETIF_F_HW_CSUM for all protocols, and check (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM) only for TCP and UDP.

Note that we're using skb->csum_offset to check if it's a TCP/UDP proctol, this might be fragile. However, as Alex said, for now we only have a few L4 protocols that are requesting Tx csum offload, we'd better fix this until a new protocol comes with a same csum offset.

v1->v2:
- not extend skb->csum_not_inet, but use skb->csum_offset to tell if it's an UDP/TCP csum packet.
v2->v3:
- add a note in the changelog, as Willem suggested.

Stable-dep-of: 04c20a9356f2 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")

---
 net/core/dev.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
net/core/dev.c +12 -1
index 5edab9328d5e0..6f04bb2ac4932 100644
@@ -3647,7 +3647,18 @@ int skb_csum_hwoffload_help(struct sk_buff *skb,
 		return !!(features & NETIF_F_SCTP_CRC) ? 0 :
 			skb_crc32c_csum_help(skb);
 
-	return !!(features & NETIF_F_CSUM_MASK) ? 0 : skb_checksum_help(skb);
+	if (features & NETIF_F_HW_CSUM)
+		return 0;
+
+	if (features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)) {
+		switch (skb->csum_offset) {
+		case offsetof(struct tcphdr, check):
+		case offsetof(struct udphdr, check):
+			return 0;
+		}
+	}
+
+	return skb_checksum_help(skb);
 }
 EXPORT_SYMBOL(skb_csum_hwoffload_help);
 
Signature · 1 line
2.43.0
author maintainer
#76 lore raw

PATCH 76/110 net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benoît Monin <[email protected]>

[ Upstream commit 04c20a9356f283da623903e81e7c6d5df7e4dc3c ]

As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability can only checksum TCP and UDP over IPv6 if the IP header does not contains extension.

This is enforced for UDP packets emitted from user-space to an IPv6 address as they go through ip6_make_skb(), which calls __ip6_append_data() where a check is done on the header size before setting CHECKSUM_PARTIAL.

But the introduction of UDP encapsulation with fou6 added a code-path where it is possible to get an skb with a partial UDP checksum and an IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension header if encap_limit is non-zero (the default value is 4).

The thread linked below describes in more details how to reproduce the problem with GRE-in-UDP tunnel.

Add a check on the network header size in skb_csum_hwoffload_help() to make sure no IPv6 packet with extension header is handed to a network device with NETIF_F_IPV6_CSUM capability.

---
 net/core/dev.c | 4 ++++
 1 file changed, 4 insertions(+)
net/core/dev.c +4 -0
index 6f04bb2ac4932..2c11247509b4c 100644
@@ -3651,6 +3651,9 @@ int skb_csum_hwoffload_help(struct sk_buff *skb,
 		return 0;
 
 	if (features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)) {
+		if (vlan_get_protocol(skb) == htons(ETH_P_IPV6) &&
+		    skb_network_header_len(skb) != sizeof(struct ipv6hdr))
+			goto sw_checksum;
 		switch (skb->csum_offset) {
 		case offsetof(struct tcphdr, check):
 		case offsetof(struct udphdr, check):
@@ -3658,6 +3661,7 @@ int skb_csum_hwoffload_help(struct sk_buff *skb,
 		}
 	}
 
+sw_checksum:
 	return skb_checksum_help(skb);
 }
 EXPORT_SYMBOL(skb_csum_hwoffload_help);
Signature · 1 line
2.43.0
author maintainer
#77 lore raw

PATCH 77/110 netfilter: nft_payload: sanitize offset and length before calling skb_checksum()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit d5953d680f7e96208c29ce4139a0e38de87a57fe ]

If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON().

skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed.

Fixes 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
---
 net/netfilter/nft_payload.c | 3 +++
 1 file changed, 3 insertions(+)
net/netfilter/nft_payload.c +3 -0
index fa64b1b8ae918..f607cd7f203ad 100644
@@ -618,6 +618,9 @@ static void nft_payload_set_eval(const struct nft_expr *expr,
 	if ((priv->csum_type == NFT_PAYLOAD_CSUM_INET || priv->csum_flags) &&
 	    (priv->base != NFT_PAYLOAD_TRANSPORT_HEADER ||
 	     skb->ip_summed != CHECKSUM_PARTIAL)) {
+		if (offset + priv->len > skb->len)
+			goto err;
+
 		fsum = skb_checksum(skb, offset, priv->len, 0);
 		tsum = csum_partial(src, priv->len, 0);
 
Signature · 1 line
2.43.0
author maintainer
#78 lore raw

PATCH 78/110 compiler-gcc: be consistent with underscores use for `no_sanitize`

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miguel Ojeda <[email protected]>

[ Upstream commit 6e2be1f2ebcea42ed6044432f72f32434e60b34d ]

Patch series "compiler-gcc: be consistent with underscores use for no_sanitize".

This patch (of 5):

Other macros that define shorthands for attributes in e.g. compiler_attributes.h and elsewhere use underscores.

Cc Marco Elver <[email protected]>
Cc Alexander Potapenko <[email protected]>
Cc Andrey Konovalov <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Dan Li <[email protected]>
Cc Kees Cook <[email protected]>
Cc Kumar Kartikeya Dwivedi <[email protected]>
Cc Nick Desaulniers <[email protected]>
Cc Uros Bizjak <[email protected]>

Stable-dep-of: 894b00a3350c ("kasan: Fix Software Tag-Based KASAN with GCC")

---
 include/linux/compiler-gcc.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
include/linux/compiler-gcc.h +4 -4
index ae2de4e1cd6fa..f8333dab22fa8 100644
@@ -117,25 +117,25 @@
 #endif
 
 #if __has_attribute(__no_sanitize_address__)
-#define __no_sanitize_address __attribute__((no_sanitize_address))
+#define __no_sanitize_address __attribute__((__no_sanitize_address__))
 #else
 #define __no_sanitize_address
 #endif
 
 #if defined(__SANITIZE_THREAD__) && __has_attribute(__no_sanitize_thread__)
-#define __no_sanitize_thread __attribute__((no_sanitize_thread))
+#define __no_sanitize_thread __attribute__((__no_sanitize_thread__))
 #else
 #define __no_sanitize_thread
 #endif
 
 #if __has_attribute(__no_sanitize_undefined__)
-#define __no_sanitize_undefined __attribute__((no_sanitize_undefined))
+#define __no_sanitize_undefined __attribute__((__no_sanitize_undefined__))
 #else
 #define __no_sanitize_undefined
 #endif
 
 #if defined(CONFIG_KCOV) && __has_attribute(__no_sanitize_coverage__)
-#define __no_sanitize_coverage __attribute__((no_sanitize_coverage))
+#define __no_sanitize_coverage __attribute__((__no_sanitize_coverage__))
 #else
 #define __no_sanitize_coverage
 #endif
Signature · 1 line
2.43.0
author maintainer
#79 lore raw

PATCH 79/110 compiler-gcc: remove attribute support check for `__no_sanitize_address__`

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miguel Ojeda <[email protected]>

[ Upstream commit ae37a9a2c2d0960d643d782b426ea1aa9c05727a ]

The attribute was added in GCC 4.8, while the minimum GCC version supported by the kernel is GCC 5.1.

Therefore, remove the check.

Stable-dep-of: 894b00a3350c ("kasan: Fix Software Tag-Based KASAN with GCC")

---
 include/linux/compiler-gcc.h | 4 ----
 1 file changed, 4 deletions(-)
include/linux/compiler-gcc.h +0 -4
index f8333dab22fa8..bf78da28e8427 100644
@@ -116,11 +116,7 @@
 #define KASAN_ABI_VERSION 3
 #endif
 
-#if __has_attribute(__no_sanitize_address__)
 #define __no_sanitize_address __attribute__((__no_sanitize_address__))
-#else
-#define __no_sanitize_address
-#endif
 
 #if defined(__SANITIZE_THREAD__) && __has_attribute(__no_sanitize_thread__)
 #define __no_sanitize_thread __attribute__((__no_sanitize_thread__))
Signature · 1 line
2.43.0
#80 lore raw

Re: [PATCH 5.10 079/110] compiler-gcc: remove attribute support check for `__no_sanitize_address__`

Quoted 5 lines · Greg Kroah-Hartman

The attribute was added in GCC 4.8, while the minimum GCC version supported by the kernel is GCC 5.1.

Therefore, remove the check.

This is fine for 6.1 in the other thread, but for 5.10 here, it may not be immediately obvious it is: GCC 5.1 is not the minimum there, but 4.9, since these two are in e.g. v5.10.228:

0bddd227f3dc ("Documentation: update for gcc 4.9 requirement") 6ec4476ac825 ("Raise gcc version requirement to 4.9")

So the patch should still be good to apply, but just noting that down.

Thanks!

Cheers,
Miguel

author maintainer
#81 lore raw

PATCH 80/110 kasan: Fix Software Tag-Based KASAN with GCC

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marco Elver <[email protected]>

[ Upstream commit 894b00a3350c560990638bdf89bdf1f3d5491950 ]

Per [1], -fsanitize=kernel-hwaddress with GCC currently does not disable instrumentation in functions with __attribute__((no_sanitize_address)).

However, __attribute__((no_sanitize("hwaddress"))) does correctly disable instrumentation. Use it instead.

---
 include/linux/compiler-gcc.h | 4 ++++
 1 file changed, 4 insertions(+)
include/linux/compiler-gcc.h +4 -0
index bf78da28e8427..5b481a22b5fe2 100644
@@ -116,7 +116,11 @@
 #define KASAN_ABI_VERSION 3
 #endif
 
+#ifdef __SANITIZE_HWADDRESS__
+#define __no_sanitize_address __attribute__((__no_sanitize__("hwaddress")))
+#else
 #define __no_sanitize_address __attribute__((__no_sanitize_address__))
+#endif
 
 #if defined(__SANITIZE_THREAD__) && __has_attribute(__no_sanitize_thread__)
 #define __no_sanitize_thread __attribute__((__no_sanitize_thread__))
Signature · 1 line
2.43.0
author maintainer
#82 lore raw

PATCH 81/110 firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiongfeng Wang <[email protected]>

[ Upstream commit c83212d79be2c9886d3e6039759ecd388fd5fed1 ]

In sdei_device_freeze(), the input parameter of cpuhp_remove_state() is passed as 'sdei_entry_point' by mistake. Change it to 'sdei_hp_state'.

Fixes d2c48b2387eb ("firmware: arm_sdei: Fix sleep from invalid context BUG")
---
 drivers/firmware/arm_sdei.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/firmware/arm_sdei.c +1 -1
index 68e55ca7491e5..b160851c524cf 100644
@@ -764,7 +764,7 @@ static int sdei_device_freeze(struct device *dev)
 	int err;
 
 	/* unregister private events */
-	cpuhp_remove_state(sdei_entry_point);
+	cpuhp_remove_state(sdei_hp_state);
 
 	err = sdei_unregister_shared();
 	if (err)
Signature · 1 line
2.43.0
author maintainer
#83 lore raw

PATCH 82/110 net: amd: mvme147: Fix probe banner message

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Palmer <[email protected]>

[ Upstream commit 82c5b53140faf89c31ea2b3a0985a2f291694169 ]

Currently this driver prints this line with what looks like a rogue format specifier when the device is probed:

[    2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx

Change the printk() for netdev_info() and move it after the registration has completed so it prints out the name of the interface properly.

---
 drivers/net/ethernet/amd/mvme147.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/net/ethernet/amd/mvme147.c +3 -4
index 3f2e4cdd0b83e..133fe0f1166b0 100644
@@ -106,10 +106,6 @@ struct net_device * __init mvme147lance_probe(int unit)
 	address = address >> 8;
 	dev->dev_addr[3] = address&0xff;
 
-	printk("%s: MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n",
-	       dev->name, dev->base_addr, MVME147_LANCE_IRQ,
-	       dev->dev_addr);
-
 	lp = netdev_priv(dev);
 	lp->ram = __get_dma_pages(GFP_ATOMIC, 3);	/* 32K */
 	if (!lp->ram) {
@@ -139,6 +135,9 @@ struct net_device * __init mvme147lance_probe(int unit)
 		return ERR_PTR(err);
 	}
 
+	netdev_info(dev, "MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n",
+		    dev->base_addr, MVME147_LANCE_IRQ, dev->dev_addr);
+
 	return dev;
 }
 
Signature · 1 line
2.43.0
author maintainer
#84 lore raw

PATCH 83/110 NFS: remove revoked delegation from servers delegation list

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dai Ngo <[email protected]>

[ Upstream commit 7ef60108069b7e3cc66432304e1dd197d5c0a9b5 ]

After the delegation is returned to the NFS server remove it from the server's delegations list to reduce the time it takes to scan this list.

Network trace captured while running the below script shows the time taken to service the CB_RECALL increases gradually due to the overhead of traversing the delegation list in nfs_delegation_find_inode_server.

The NFS server in this test is a Solaris server which issues CB_RECALL when receiving the all-zero stateid in the SETATTR.

mount=/mnt/data
for i in $(seq 1 20)
do
echo $i
mkdir $mount/testtarfile$i
time tar -C $mount/testtarfile$i -xf 5000_files.tar
done

---
 fs/nfs/delegation.c | 5 +++++
 1 file changed, 5 insertions(+)
fs/nfs/delegation.c +5 -0
index c15188d0b6b33..02d9af026ad15 100644
@@ -960,6 +960,11 @@ void nfs_delegation_mark_returned(struct inode *inode,
 	}
 
 	nfs_mark_delegation_revoked(delegation);
+	clear_bit(NFS_DELEGATION_RETURNING, &delegation->flags);
+	spin_unlock(&delegation->lock);
+	if (nfs_detach_delegation(NFS_I(inode), delegation, NFS_SERVER(inode)))
+		nfs_put_delegation(delegation);
+	goto out_rcu_unlock;
 
 out_clear_returning:
 	clear_bit(NFS_DELEGATION_RETURNING, &delegation->flags);
Signature · 1 line
2.43.0
author maintainer
#85 lore raw

PATCH 84/110 misc: sgi-gru: Dont disable preemption in GRU driver

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dimitri Sivanich <[email protected]>

[ Upstream commit b983b271662bd6104d429b0fd97af3333ba760bf ]

Disabling preemption in the GRU driver is unnecessary, and clashes with sleeping locks in several code paths. Remove preempt_disable and preempt_enable from the GRU driver.

---
 drivers/misc/sgi-gru/grukservices.c | 2 --
 drivers/misc/sgi-gru/grumain.c      | 4 ----
 drivers/misc/sgi-gru/grutlbpurge.c  | 2 --
 3 files changed, 8 deletions(-)
drivers/misc/sgi-gru/grukservices.c +0 -2
index 0ea923fe6371b..e2bdba4742930 100644
@@ -258,7 +258,6 @@ static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
 	int lcpu;
 
 	BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES);
-	preempt_disable();
 	bs = gru_lock_kernel_context(-1);
 	lcpu = uv_blade_processor_id();
 	*cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE;
@@ -272,7 +271,6 @@ static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
 static void gru_free_cpu_resources(void *cb, void *dsr)
 {
 	gru_unlock_kernel_context(uv_numa_blade_id());
-	preempt_enable();
 }
 
 /*
drivers/misc/sgi-gru/grumain.c +0 -4
index e2325e3d077ea..4f7a0f8472556 100644
@@ -941,10 +941,8 @@ vm_fault_t gru_fault(struct vm_fault *vmf)
 
 again:
 	mutex_lock(&gts->ts_ctxlock);
-	preempt_disable();
 
 	if (gru_check_context_placement(gts)) {
-		preempt_enable();
 		mutex_unlock(&gts->ts_ctxlock);
 		gru_unload_context(gts, 1);
 		return VM_FAULT_NOPAGE;
@@ -953,7 +951,6 @@ vm_fault_t gru_fault(struct vm_fault *vmf)
 	if (!gts->ts_gru) {
 		STAT(load_user_context);
 		if (!gru_assign_gru_context(gts)) {
-			preempt_enable();
 			mutex_unlock(&gts->ts_ctxlock);
 			set_current_state(TASK_INTERRUPTIBLE);
 			schedule_timeout(GRU_ASSIGN_DELAY);  /* true hack ZZZ */
@@ -969,7 +966,6 @@ vm_fault_t gru_fault(struct vm_fault *vmf)
 				vma->vm_page_prot);
 	}
 
-	preempt_enable();
 	mutex_unlock(&gts->ts_ctxlock);
 
 	return VM_FAULT_NOPAGE;
drivers/misc/sgi-gru/grutlbpurge.c +0 -2
index 10921cd2608df..1107dd3e2e9fa 100644
@@ -65,7 +65,6 @@ static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state
 	struct gru_tlb_global_handle *tgh;
 	int n;
 
-	preempt_disable();
 	if (uv_numa_blade_id() == gru->gs_blade_id)
 		n = get_on_blade_tgh(gru);
 	else
@@ -79,7 +78,6 @@ static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state
 static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
 {
 	unlock_tgh_handle(tgh);
-	preempt_enable();
 }
 
 /*
Signature · 1 line
2.43.0
author maintainer
#86 lore raw

PATCH 85/110 usbip: tools: Fix detach_port() invalid port error path

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zongmin Zhou <[email protected]>

commit e7cd4b811c9e019f5acbce85699c622b30194c24 upstream.

The detach_port() doesn't return error
when detach is attempted on an invalid port.

---
 tools/usb/usbip/src/usbip_detach.c |    1 +
 1 file changed, 1 insertion(+)
tools/usb/usbip/src/usbip_detach.c +1 -0
@@ -68,6 +68,7 @@ static int detach_port(char *port)
 	}
 
 	if (!found) {
+		ret = -1;
 		err("Invalid port %s > maxports %d",
 			port, vhci_driver->nports);
 		goto call_driver_close;
author maintainer
#87 lore raw

PATCH 86/110 usb: phy: Fix API devm_usb_put_phy() can not release the phy

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zijun Hu <[email protected]>

commit fdce49b5da6e0fb6d077986dec3e90ef2b094b50 upstream.

For devm_usb_put_phy(), its comment says it needs to invoke usb_put_phy() to release the phy, but it does not do that actually, so it can not fully undo what the API devm_usb_get_phy() does, that is wrong, fixed by using devres_release() instead of devres_destroy() within the API.

Fixes cedf8602373a ("usb: phy: move bulk of otg/otg.c to phy/phy.c")
---
 drivers/usb/phy/phy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/phy/phy.c +1 -1
@@ -590,7 +590,7 @@ void devm_usb_put_phy(struct device *dev
 {
 	int r;
 
-	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
+	r = devres_release(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
 	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
 }
 EXPORT_SYMBOL_GPL(devm_usb_put_phy);
author maintainer
#88 lore raw

PATCH 87/110 xhci: Fix Link TRB DMA in command ring stopped completion event

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Faisal Hassan <[email protected]>

commit 075919f6df5dd82ad0b1894898b315fbb3c29b84 upstream.

During the aborting of a command, the software receives a command completion event for the command ring stopped, with the TRB pointing to the next TRB after the aborted command.

If the command we abort is located just before the Link TRB in the command ring, then during the 'command ring stopped' completion event, the xHC gives the Link TRB in the event's cmd DMA, which causes a mismatch in handling command completion event.

To address this situation, move the 'command ring stopped' completion event check slightly earlier, since the specific command it stopped on isn't of significant concern.

Fixes 7f84eef0dafb ("USB: xhci: No-op command queueing and irq handler.")
---
 drivers/usb/host/xhci-ring.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/usb/host/xhci-ring.c +8 -8
@@ -1582,6 +1582,14 @@ static void handle_cmd_completion(struct
 
 	trace_xhci_handle_command(xhci->cmd_ring, &cmd_trb->generic);
 
+	cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
+
+	/* If CMD ring stopped we own the trbs between enqueue and dequeue */
+	if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
+		complete_all(&xhci->cmd_ring_stop_completion);
+		return;
+	}
+
 	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
 			cmd_trb);
 	/*
@@ -1598,14 +1606,6 @@ static void handle_cmd_completion(struct
 
 	cancel_delayed_work(&xhci->cmd_timer);
 
-	cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
-
-	/* If CMD ring stopped we own the trbs between enqueue and dequeue */
-	if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
-		complete_all(&xhci->cmd_ring_stop_completion);
-		return;
-	}
-
 	if (cmd->command_trb != xhci->cmd_ring->dequeue) {
 		xhci_err(xhci,
 			 "Command completion event does not match command\n");
author maintainer
#89 lore raw

PATCH 88/110 xhci: Use pm_runtime_get to prevent RPM on unsupported systems

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Basavaraj Natikar <[email protected]>

commit 31004740e42846a6f0bb255e6348281df3eb8032 upstream.

Use pm_runtime_put in the remove function and pm_runtime_get to disable RPM on platforms that don't support runtime D3, as re-enabling it through sysfs auto power control may cause the controller to malfunction. This can lead to issues such as hotplug devices not being detected due to failed interrupt generation.

Fixes a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states")
Cc stable <[email protected]>
---
 drivers/usb/host/xhci-pci.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/host/xhci-pci.c +4 -2
@@ -516,7 +516,7 @@ static int xhci_pci_probe(struct pci_dev
 	pm_runtime_put_noidle(&dev->dev);
 
 	if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
-		pm_runtime_forbid(&dev->dev);
+		pm_runtime_get(&dev->dev);
 	else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
 		pm_runtime_allow(&dev->dev);
 
@@ -543,7 +543,9 @@ static void xhci_pci_remove(struct pci_d
 
 	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
-	if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
+	if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
+		pm_runtime_put(&dev->dev);
+	else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
 		pm_runtime_forbid(&dev->dev);
 
 	if (xhci->shared_hcd) {
author maintainer
#90 lore raw

PATCH 89/110 Revert "driver core: Fix uevent_show() vs driver detach race"

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <[email protected]>

commit 9a71892cbcdb9d1459c84f5a4c722b14354158a5 upstream.

This reverts commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c.

This commit causes a regression, so revert it for now until it can come back in a way that works for everyone.

Fixes 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
Cc stable <[email protected]>
Cc Ashish Sangwan <[email protected]>
Cc Namjae Jeon <[email protected]>
Cc Dirk Behme <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Rafael J. Wysocki <[email protected]>
Cc Dan Williams <[email protected]>
---
 drivers/base/core.c   |   13 +++++--------
 drivers/base/module.c |    4 ----
 2 files changed, 5 insertions(+), 12 deletions(-)
drivers/base/core.c +5 -8
@@ -25,7 +25,6 @@
 #include <linux/mutex.h>
 #include <linux/pm_runtime.h>
 #include <linux/netdevice.h>
-#include <linux/rcupdate.h>
 #include <linux/sched/signal.h>
 #include <linux/sched/mm.h>
 #include <linux/sysfs.h>
@@ -1910,7 +1909,6 @@ static int dev_uevent(struct kset *kset,
 		      struct kobj_uevent_env *env)
 {
 	struct device *dev = kobj_to_dev(kobj);
-	struct device_driver *driver;
 	int retval = 0;
 
 	/* add device node properties if present */
@@ -1939,12 +1937,8 @@ static int dev_uevent(struct kset *kset,
 	if (dev->type && dev->type->name)
 		add_uevent_var(env, "DEVTYPE=%s", dev->type->name);
 
-	/* Synchronize with module_remove_driver() */
-	rcu_read_lock();
-	driver = READ_ONCE(dev->driver);
-	if (driver)
-		add_uevent_var(env, "DRIVER=%s", driver->name);
-	rcu_read_unlock();
+	if (dev->driver)
+		add_uevent_var(env, "DRIVER=%s", dev->driver->name);
 
 	/* Add common DT information about the device */
 	of_device_uevent(dev, env);
@@ -2014,8 +2008,11 @@ static ssize_t uevent_show(struct device
 	if (!env)
 		return -ENOMEM;
 
+	/* Synchronize with really_probe() */
+	device_lock(dev);
 	/* let the kset specific function add its keys */
 	retval = kset->uevent_ops->uevent(kset, &dev->kobj, env);
+	device_unlock(dev);
 	if (retval)
 		goto out;
 
drivers/base/module.c +0 -4
@@ -7,7 +7,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/string.h>
-#include <linux/rcupdate.h>
 #include "base.h"
 
 static char *make_driver_name(struct device_driver *drv)
@@ -78,9 +77,6 @@ void module_remove_driver(struct device_
 	if (!drv)
 		return;
 
-	/* Synchronize with dev_uevent() */
-	synchronize_rcu();
-
 	sysfs_remove_link(&drv->p->kobj, "module");
 
 	if (drv->owner)
author maintainer
#91 lore raw

PATCH 90/110 wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <[email protected]>

commit 393b6bc174b0dd21bb2a36c13b36e62fc3474a23 upstream.

Avoid potentially crashing in the driver because of uninitialized private data

Fixes 5b3dc42b1b0d ("mac80211: add support for driver tx power reporting")
---
 net/mac80211/cfg.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/mac80211/cfg.c +2 -1
@@ -2720,7 +2720,8 @@ static int ieee80211_get_tx_power(struct
 	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
 
-	if (local->ops->get_txpower)
+	if (local->ops->get_txpower &&
+	    (sdata->flags & IEEE80211_SDATA_IN_DRIVER))
 		return drv_get_txpower(local, sdata, dbm);
 
 	if (!local->use_chanctx)
author maintainer
#92 lore raw

PATCH 91/110 wifi: ath10k: Fix memory leak in management tx

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Manikanta Pubbisetty <[email protected]>

commit e15d84b3bba187aa372dff7c58ce1fd5cb48a076 upstream.

In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic.

Kmemleak reports this problem as below,

unreferenced object 0xffffff80b64ed250 (size 16):
comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes):

    00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00  .+.......t......
  backtrace:
    [<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8
    [<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110
    [<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core]
    [<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core]
    [<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400
    [<ffffffe6e78d60b8>] worker_thread+0x208/0x328
    [<ffffffe6e78dc890>] kthread+0x100/0x1c0
    [<ffffffe6e78166c0>] ret_from_fork+0x10/0x20

Free the memory during completion and cleanup to fix the leak.

Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1

Fixes dc405152bb64 ("ath10k: handle mgmt tx completion event")
Fixes c730c477176a ("ath10k: Remove msdu from idr when management pkt send fails")
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |    7 ++++++-
 drivers/net/wireless/ath/ath10k/wmi.c     |    2 ++
 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/wmi-tlv.c +6 -1
@@ -3035,9 +3035,14 @@ ath10k_wmi_tlv_op_cleanup_mgmt_tx_send(s
 				       struct sk_buff *msdu)
 {
 	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(msdu);
+	struct ath10k_mgmt_tx_pkt_addr *pkt_addr;
 	struct ath10k_wmi *wmi = &ar->wmi;
 
-	idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
+	spin_lock_bh(&ar->data_lock);
+	pkt_addr = idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
+	spin_unlock_bh(&ar->data_lock);
+
+	kfree(pkt_addr);
 
 	return 0;
 }
drivers/net/wireless/ath/ath10k/wmi.c +2 -0
@@ -2440,6 +2440,7 @@ wmi_process_mgmt_tx_comp(struct ath10k *
 	dma_unmap_single(ar->dev, pkt_addr->paddr,
 			 msdu->len, DMA_TO_DEVICE);
 	info = IEEE80211_SKB_CB(msdu);
+	kfree(pkt_addr);
 
 	if (param->status) {
 		info->flags &= ~IEEE80211_TX_STAT_ACK;
@@ -9581,6 +9582,7 @@ static int ath10k_wmi_mgmt_tx_clean_up_p
 	dma_unmap_single(ar->dev, pkt_addr->paddr,
 			 msdu->len, DMA_TO_DEVICE);
 	ieee80211_free_txskb(ar->hw, msdu);
+	kfree(pkt_addr);
 
 	return 0;
 }
author maintainer
#93 lore raw

PATCH 92/110 wifi: iwlegacy: Clear stale interrupts before resuming device

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <[email protected]>

commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream.

iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up.

Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume.

Here's a debug log of the indicent:

[   12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000
[   12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000
[   12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio.
[   12.042653] iwl4965 0000:10:00.0: On demand firmware reload
[   12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282
[   12.052207] ieee80211 phy0: il4965_mac_start enter
[   12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff
[   12.052244] ieee80211 phy0: il4965_set_hw_ready hardware  ready
[   12.052324] ieee80211 phy0: il_apm_init Init card's basic functions
[   12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S
[   12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm
[   12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm
[   12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK
[   12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations
[   12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up
[   12.058737] ieee80211 phy0: il4965_mac_start Start UP work done.
[   12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down
[   12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout
[   12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort
[   12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver
[   12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared
[   12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state
[   12.058827] ieee80211 phy0: _il_apm_stop_master stop master
[   12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear.
[   12.058869] ieee80211 phy0: Hardware restart was requested
[   16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms.
[   16.132303] ------------[ cut here ]------------
[   16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.
[   16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143
[   16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.132463] Workqueue: async async_run_entry_fn
[   16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b
[   16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282
[   16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001
[   16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001
[   16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003
[   16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001
[   16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92
[   16.132515] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.132517] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.132521] Call Trace:
[   16.132525]  <TASK>
[   16.132526]  ? __warn+0x77/0x120
[   16.132532]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132564]  ? report_bug+0x15c/0x190
[   16.132568]  ? handle_bug+0x36/0x70
[   16.132571]  ? exc_invalid_op+0x13/0x60
[   16.132573]  ? asm_exc_invalid_op+0x16/0x20
[   16.132579]  ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[   16.132611]  ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core]
[   16.132617]  ? pick_eevdf+0x133/0x1c0
[   16.132622]  ? check_preempt_wakeup_fair+0x70/0x90
[   16.132626]  ? wakeup_preempt+0x4a/0x60
[   16.132628]  ? ttwu_do_activate.isra.0+0x5a/0x190
[   16.132632]  wiphy_resume+0x79/0x1a0 [cfg80211]
[   16.132675]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.132697]  dpm_run_callback+0x75/0x1b0
[   16.132703]  device_resume+0x97/0x200
[   16.132707]  async_resume+0x14/0x20
[   16.132711]  async_run_entry_fn+0x1b/0xa0
[   16.132714]  process_one_work+0x13d/0x350
[   16.132718]  worker_thread+0x2be/0x3d0
[   16.132722]  ? cancel_delayed_work_sync+0x70/0x70
[   16.132725]  kthread+0xc0/0xf0
[   16.132729]  ? kthread_park+0x80/0x80
[   16.132732]  ret_from_fork+0x28/0x40
[   16.132735]  ? kthread_park+0x80/0x80
[   16.132738]  ret_from_fork_asm+0x11/0x20
[   16.132741]  </TASK>
[   16.132742] ---[ end trace 0000000000000000 ]---
[   16.132930] ------------[ cut here ]------------
[   16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211]
[   16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[   16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G        W          6.11.0-cl+ #143
[   16.133018] Tainted: [W]=WARN
[   16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[   16.133021] Workqueue: async async_run_entry_fn
[   16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211]
[   16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e
[   16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246
[   16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0
[   16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0
[   16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000
[   16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60
[   16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8
[   16.133061] FS:  0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[   16.133063] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[   16.133067] Call Trace:
[   16.133069]  <TASK>
[   16.133070]  ? __warn+0x77/0x120
[   16.133075]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133098]  ? report_bug+0x15c/0x190
[   16.133100]  ? handle_bug+0x36/0x70
[   16.133103]  ? exc_invalid_op+0x13/0x60
[   16.133105]  ? asm_exc_invalid_op+0x16/0x20
[   16.133109]  ? drv_stop+0xe7/0xf0 [mac80211]
[   16.133132]  ieee80211_do_stop+0x55a/0x810 [mac80211]
[   16.133161]  ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel]
[   16.133164]  ieee80211_stop+0x4f/0x180 [mac80211]
[   16.133192]  __dev_close_many+0xa2/0x120
[   16.133195]  dev_close_many+0x90/0x150
[   16.133198]  dev_close+0x5d/0x80
[   16.133200]  cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211]
[   16.133223]  wiphy_resume+0xb2/0x1a0 [cfg80211]
[   16.133247]  ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[   16.133269]  dpm_run_callback+0x75/0x1b0
[   16.133273]  device_resume+0x97/0x200
[   16.133277]  async_resume+0x14/0x20
[   16.133280]  async_run_entry_fn+0x1b/0xa0
[   16.133283]  process_one_work+0x13d/0x350
[   16.133287]  worker_thread+0x2be/0x3d0
[   16.133290]  ? cancel_delayed_work_sync+0x70/0x70
[   16.133294]  kthread+0xc0/0xf0
[   16.133296]  ? kthread_park+0x80/0x80
[   16.133299]  ret_from_fork+0x28/0x40
[   16.133302]  ? kthread_park+0x80/0x80
[   16.133304]  ret_from_fork_asm+0x11/0x20
[   16.133307]  </TASK>
[   16.133308] ---[ end trace 0000000000000000 ]---
[   16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110
[   16.133360] ieee80211 phy0: PM: failed to restore async: error -110
---
 drivers/net/wireless/intel/iwlegacy/common.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/net/wireless/intel/iwlegacy/common.c +2 -0
@@ -4963,6 +4963,8 @@ il_pci_resume(struct device *device)
 	 */
 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
 
+	_il_wr(il, CSR_INT, 0xffffffff);
+	_il_wr(il, CSR_FH_INT_STATUS, 0xffffffff);
 	il_enable_interrupts(il);
 
 	if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
author maintainer
#94 lore raw

PATCH 93/110 staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zicheng Qu <[email protected]>

commit 6bd301819f8f69331a55ae2336c8b111fc933f3d upstream.

In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value.

---
 drivers/staging/iio/frequency/ad9832.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/staging/iio/frequency/ad9832.c +5 -2
@@ -129,12 +129,15 @@ static unsigned long ad9832_calc_freqreg
 static int ad9832_write_frequency(struct ad9832_state *st,
 				  unsigned int addr, unsigned long fout)
 {
+	unsigned long clk_freq;
 	unsigned long regval;
 
-	if (fout > (clk_get_rate(st->mclk) / 2))
+	clk_freq = clk_get_rate(st->mclk);
+
+	if (!clk_freq || fout > (clk_freq / 2))
 		return -EINVAL;
 
-	regval = ad9832_calc_freqreg(clk_get_rate(st->mclk), fout);
+	regval = ad9832_calc_freqreg(clk_freq, fout);
 
 	st->freq_data[0] = cpu_to_be16((AD9832_CMD_FRE8BITSW << CMD_SHIFT) |
 					(addr << ADD_SHIFT) |
author maintainer
#95 lore raw

PATCH 94/110 iio: light: veml6030: fix microlux value calculation

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <[email protected]>

commit 63dd163cd61dda6f38343776b42331cc6b7e56e0 upstream.

The raw value conversion to obtain a measurement in lux as INT_PLUS_MICRO does not calculate the decimal part properly to display it as micro (in this case microlux). It only calculates the module to obtain the decimal part from a resolution that is 10000 times the provided in the datasheet (0.5376 lux/cnt for the veml6030). The resulting value must still be multiplied by 100 to make it micro.

This bug was introduced with the original implementation of the driver.

Only the illuminance channel is fixed becuase the scale is non sensical for the intensity channels anyway.

---
 drivers/iio/light/veml6030.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/light/veml6030.c +1 -1
@@ -522,7 +522,7 @@ static int veml6030_read_raw(struct iio_
 			}
 			if (mask == IIO_CHAN_INFO_PROCESSED) {
 				*val = (reg * data->cur_resolution) / 10000;
-				*val2 = (reg * data->cur_resolution) % 10000;
+				*val2 = (reg * data->cur_resolution) % 10000 * 100;
 				return IIO_VAL_INT_PLUS_MICRO;
 			}
 			*val = reg;
author maintainer
#96 lore raw

PATCH 95/110 nilfs2: fix potential deadlock with newly created symlinks

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <[email protected]>

commit b3a033e3ecd3471248d474ef263aadc0059e516a upstream.

Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock.

This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem().

This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held:

Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints.

---
 fs/nilfs2/namei.c |    3 +++
 1 file changed, 3 insertions(+)
fs/nilfs2/namei.c +3 -0
@@ -156,6 +156,9 @@ static int nilfs_symlink(struct inode *d
 	/* slow symlink */
 	inode->i_op = &nilfs_symlink_inode_operations;
 	inode_nohighmem(inode);
+	mapping_set_gfp_mask(inode->i_mapping,
+			     mapping_gfp_constraint(inode->i_mapping,
+						    ~__GFP_FS));
 	inode->i_mapping->a_ops = &nilfs_aops;
 	err = page_symlink(inode, symname, l);
 	if (err)
author maintainer
#97 lore raw

PATCH 96/110 mm: add remap_pfn_range_notrack

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <[email protected]>

commit 74ffa5a3e68504dd289135b1cf0422c19ffb3f2e upstream.

Patch series "add remap_pfn_range_notrack instead of reinventing it in i915", v2.

i915 has some reason to want to avoid the track_pfn_remap overhead in remap_pfn_range. Add a function to the core VM to do just that rather than reinventing the functionality poorly in the driver.

Note that the remap_io_sg path does get exercises when using Xorg on my Thinkpad X1, so this should be considered lightly tested, I've not managed to hit the remap_io_mapping path at all.

This patch (of 4):

Add a version of remap_pfn_range that does not call track_pfn_range. This will be used to fix horrible abuses of VM internals in the i915 driver.

---
 include/linux/mm.h |    2 ++
 mm/memory.c        |   51 +++++++++++++++++++++++++++++++--------------------
 2 files changed, 33 insertions(+), 20 deletions(-)
include/linux/mm.h +2 -0
@@ -2749,6 +2749,8 @@ unsigned long change_prot_numa(struct vm
 struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr);
 int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
 			unsigned long pfn, unsigned long size, pgprot_t);
+int remap_pfn_range_notrack(struct vm_area_struct *vma, unsigned long addr,
+		unsigned long pfn, unsigned long size, pgprot_t prot);
 int vm_insert_page(struct vm_area_struct *, unsigned long addr, struct page *);
 int vm_insert_pages(struct vm_area_struct *vma, unsigned long addr,
 			struct page **pages, unsigned long *num);
mm/memory.c +31 -20

79 lines not on this page · raw message

author maintainer
#98 lore raw

PATCH 97/110 mm: avoid leaving partial pfn mappings around in error case

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <[email protected]>

commit 79a61cc3fc0466ad2b7b89618a6157785f0293b3 upstream.

As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'.

That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order.

In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries.

To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling.

---
 mm/memory.c |   27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)
mm/memory.c +22 -5
@@ -2290,11 +2290,7 @@ static inline int remap_p4d_range(struct
 	return 0;
 }
 
-/*
- * Variant of remap_pfn_range that does not call track_pfn_remap.  The caller
- * must have pre-validated the caching bits of the pgprot_t.
- */
-int remap_pfn_range_notrack(struct vm_area_struct *vma, unsigned long addr,
+static int remap_pfn_range_internal(struct vm_area_struct *vma, unsigned long addr,
 		unsigned long pfn, unsigned long size, pgprot_t prot)
 {
 	pgd_t *pgd;
@@ -2347,6 +2343,27 @@ int remap_pfn_range_notrack(struct vm_ar
 	return 0;
 }
 
+/*
+ * Variant of remap_pfn_range that does not call track_pfn_remap.  The caller
+ * must have pre-validated the caching bits of the pgprot_t.
+ */
+int remap_pfn_range_notrack(struct vm_area_struct *vma, unsigned long addr,
+		unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	int error = remap_pfn_range_internal(vma, addr, pfn, size, prot);
+
+	if (!error)
+		return 0;
+
+	/*
+	 * A partial pfn range mapping is dangerous: it does not
+	 * maintain page reference counts, and callers may free
+	 * pages due to the error. So zap it early.
+	 */
+	zap_page_range_single(vma, addr, size, NULL);
+	return error;
+}
+
 /**
  * remap_pfn_range - remap kernel memory to userspace
  * @vma: user vma to map to
author maintainer
#99 lore raw

PATCH 98/110 riscv: vdso: Prevent the compiler from inserting calls to memset()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexandre Ghiti <[email protected]>

[ Upstream commit bf40167d54d55d4b54d0103713d86a8638fb9290 ]

The compiler is smart enough to insert a call to memset() in riscv_vdso_get_cpus(), which generates a dynamic relocation.

So prevent this by using -fno-builtin option.

---
 arch/riscv/kernel/vdso/Makefile | 1 +
 1 file changed, 1 insertion(+)
arch/riscv/kernel/vdso/Makefile +1 -0
index f4ac7ff56bcea..53fe5e2ab32ed 100644
@@ -18,6 +18,7 @@ obj-vdso = $(patsubst %, %.o, $(vdso-syms)) note.o
 
 ccflags-y := -fno-stack-protector
 ccflags-y += -DDISABLE_BRANCH_PROFILING
+ccflags-y += -fno-builtin
 
 ifneq ($(c-gettimeofday-y),)
   CFLAGS_vgettimeofday.o += -fPIC -include $(c-gettimeofday-y)
Signature · 1 line
2.43.0
author maintainer
#100 lore raw

PATCH 99/110 riscv: efi: Set NX compat flag in PE/COFF header

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heinrich Schuchardt <[email protected]>

[ Upstream commit d41373a4b910961df5a5e3527d7bde6ad45ca438 ]

The IMAGE_DLLCHARACTERISTICS_NX_COMPAT informs the firmware that the EFI binary does not rely on pages that are both executable and writable.

The flag is used by some distro versions of GRUB to decide if the EFI binary may be executed.

As the Linux kernel neither has RWX sections nor needs RWX pages for relocation we should set the flag.

---
 arch/riscv/kernel/efi-header.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/efi-header.S +1 -1
index 8e733aa48ba6c..c306f3a6a800e 100644
@@ -59,7 +59,7 @@ extra_header_fields:
 	.long	efi_header_end - _start			// SizeOfHeaders
 	.long	0					// CheckSum
 	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION		// Subsystem
-	.short	0					// DllCharacteristics
+	.short	IMAGE_DLL_CHARACTERISTICS_NX_COMPAT	// DllCharacteristics
 	.quad	0					// SizeOfStackReserve
 	.quad	0					// SizeOfStackCommit
 	.quad	0					// SizeOfHeapReserve
Signature · 1 line
2.43.0
author maintainer
#101 lore raw

PATCH 100/110 riscv: Use %u to format the output of cpu

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: WangYuli <[email protected]>

[ Upstream commit e0872ab72630dada3ae055bfa410bf463ff1d1e0 ]

'cpu' is an unsigned integer, so its conversion specifier should be %u, not %d.

---
 arch/riscv/kernel/cpu-hotplug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/cpu-hotplug.c +1 -1
index df84e0c13db18..0e948e87bd813 100644
@@ -69,7 +69,7 @@ void __cpu_die(unsigned int cpu)
 	if (cpu_ops[cpu]->cpu_is_stopped)
 		ret = cpu_ops[cpu]->cpu_is_stopped(cpu);
 	if (ret)
-		pr_warn("CPU%d may not have stopped: %d\n", cpu, ret);
+		pr_warn("CPU%u may not have stopped: %d\n", cpu, ret);
 }
 
 /*
Signature · 1 line
2.43.0
author maintainer
#102 lore raw

PATCH 101/110 riscv: Remove unused GENERATING_ASM_OFFSETS

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chunyan Zhang <[email protected]>

[ Upstream commit 46d4e5ac6f2f801f97bcd0ec82365969197dc9b1 ]

The macro is not used in the current version of kernel, it looks like can be removed to avoid a build warning:

../arch/riscv/kernel/asm-offsets.c: At top level:
../arch/riscv/kernel/asm-offsets.c:7: warning: macro "GENERATING_ASM_OFFSETS" is not used [-Wunused-macros]
7 | #define GENERATING_ASM_OFFSETS

---
 arch/riscv/kernel/asm-offsets.c | 2 --
 1 file changed, 2 deletions(-)
arch/riscv/kernel/asm-offsets.c +0 -2
index 877ff65b4e136..a3d4317309d4c 100644
@@ -4,8 +4,6 @@
  * Copyright (C) 2017 SiFive
  */
 
-#define GENERATING_ASM_OFFSETS
-
 #include <linux/kbuild.h>
 #include <linux/sched.h>
 #include <asm/thread_info.h>
Signature · 1 line
2.43.0
author maintainer
#103 lore raw

PATCH 102/110 riscv: Remove duplicated GET_RM

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chunyan Zhang <[email protected]>

[ Upstream commit 164f66de6bb6ef454893f193c898dc8f1da6d18b ]

The macro GET_RM defined twice in this file, one can be removed.

---
 arch/riscv/kernel/traps_misaligned.c | 2 --
 1 file changed, 2 deletions(-)
arch/riscv/kernel/traps_misaligned.c +0 -2
index b246c3dc69930..d548d6992d988 100644
@@ -131,8 +131,6 @@
 #define REG_PTR(insn, pos, regs)	\
 	(ulong *)((ulong)(regs) + REG_OFFSET(insn, pos))
 
-#define GET_RM(insn)			(((insn) >> 12) & 7)
-
 #define GET_RS1(insn, regs)		(*REG_PTR(insn, SH_RS1, regs))
 #define GET_RS2(insn, regs)		(*REG_PTR(insn, SH_RS2, regs))
 #define GET_RS1S(insn, regs)		(*REG_PTR(RVC_RS1S(insn), 0, regs))
Signature · 1 line
2.43.0
author maintainer
#104 lore raw

PATCH 103/110 ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Edward Adam Davis <[email protected]>

[ Upstream commit bc0a2f3a73fcdac651fca64df39306d1e5ebe3b0 ]

Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two reasons for this: first, the parameter value passed is greater than ocfs2_max_inline_data_with_xattr, second, the start and end parameters of ocfs2_truncate_inline are "unsigned int".

So, we need to add a sanity check for byte_start and byte_len right before ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater than ocfs2_max_inline_data_with_xattr return -EINVAL.

---
 fs/ocfs2/file.c | 8 ++++++++
 1 file changed, 8 insertions(+)
fs/ocfs2/file.c +8 -0
index 5fd565a6228f7..09a62539ab74d 100644
@@ -1787,6 +1787,14 @@ int ocfs2_remove_inode_range(struct inode *inode,
 		return 0;
 
 	if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
+		int id_count = ocfs2_max_inline_data_with_xattr(inode->i_sb, di);
+
+		if (byte_start > id_count || byte_start + byte_len > id_count) {
+			ret = -EINVAL;
+			mlog_errno(ret);
+			goto out;
+		}
+
 		ret = ocfs2_truncate_inline(inode, di_bh, byte_start,
 					    byte_start + byte_len, 0);
 		if (ret) {
Signature · 1 line
2.43.0
author maintainer
#105 lore raw

PATCH 104/110 x86/bugs: Use code segment selector for VERW operand

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pawan Gupta <[email protected]>

commit e4d2102018542e3ae5e297bc6e229303abff8a0f upstream.

Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call:

  general protection fault: 0000 [#1] PREEMPT SMP
  CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1
  Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010
  EIP: restore_all_switch_stack+0xbe/0xcf
  EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
  ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc
  DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046
  CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0
  Call Trace:
   show_regs+0x70/0x78
   die_addr+0x29/0x70
   exc_general_protection+0x13c/0x348
   exc_bounds+0x98/0x98
   handle_exception+0x14d/0x14d
   exc_bounds+0x98/0x98
   restore_all_switch_stack+0xbe/0xcf
   exc_bounds+0x98/0x98
   restore_all_switch_stack+0xbe/0xcf

This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction:

#GP(0) - If a memory operand effective address is outside the CS, DS, ES,
FS, or GS segment limit.

CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds.

[ mingo: Fixed the SOB chain. ]

---
 arch/x86/include/asm/nospec-branch.h |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
arch/x86/include/asm/nospec-branch.h +10 -1
@@ -199,7 +199,16 @@
  */
 .macro CLEAR_CPU_BUFFERS
 	ALTERNATIVE "jmp .Lskip_verw_\@", "", X86_FEATURE_CLEAR_CPU_BUF
-	verw _ASM_RIP(mds_verw_sel)
+#ifdef CONFIG_X86_64
+	verw mds_verw_sel(%rip)
+#else
+	/*
+	 * In 32bit mode, the memory operand must be a %cs reference. The data
+	 * segments may not be usable (vm86 mode), and the stack segment may not
+	 * be flat (ESPFIX32).
+	 */
+	verw %cs:mds_verw_sel
+#endif
 .Lskip_verw_\@:
 .endm
 
author maintainer
#106 lore raw

PATCH 105/110 nilfs2: fix kernel bug due to missing clearing of checked flag

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <[email protected]>

commit 41e192ad2779cae0102879612dfe46726e4396aa upstream.

Syzbot reported that in directory operations after nilfs2 detects filesystem corruption and degrades to read-only, __block_write_begin_int(), which is called to prepare block writes, may fail the BUG_ON check for accesses exceeding the folio/page size, triggering a kernel bug.

This was found to be because the "checked" flag of a page/folio was not cleared when it was discarded by nilfs2's own routine, which causes the sanity check of directory entries to be skipped when the directory page/folio is reloaded. So, fix that.

This was necessary when the use of nilfs2's own page discard routine was applied to more than just metadata files.

Fixes 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Reported-by [email protected]
---
 fs/nilfs2/page.c |    1 +
 1 file changed, 1 insertion(+)
fs/nilfs2/page.c +1 -0
@@ -404,6 +404,7 @@ void nilfs_clear_dirty_page(struct page
 
 	ClearPageUptodate(page);
 	ClearPageMappedToDisk(page);
+	ClearPageChecked(page);
 
 	if (page_has_buffers(page)) {
 		struct buffer_head *bh, *head;
author maintainer
#107 lore raw

PATCH 106/110 mm: shmem: fix data-race in shmem_getattr()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeongjun Park <[email protected]>

commit d949d1d14fa281ace388b1de978e8f2cd52875cf upstream.

I got the following KCSAN report during syzbot testing:

==================================================================

BUG: KCSAN: data-race in generic_fillattr / inode_set_ctime_current

write to 0xffff888102eb3260 of 4 bytes by task 6565 on cpu 1:

 inode_set_ctime_to_ts include/linux/fs.h:1638 [inline]
 inode_set_ctime_current+0x169/0x1d0 fs/inode.c:2626
 shmem_mknod+0x117/0x180 mm/shmem.c:3443
 shmem_create+0x34/0x40 mm/shmem.c:3497
 lookup_open fs/namei.c:3578 [inline]
 open_last_lookups fs/namei.c:3647 [inline]
 path_openat+0xdbc/0x1f00 fs/namei.c:3883
 do_filp_open+0xf7/0x200 fs/namei.c:3913
 do_sys_openat2+0xab/0x120 fs/open.c:1416
 do_sys_open fs/open.c:1431 [inline]
 __do_sys_openat fs/open.c:1447 [inline]
 __se_sys_openat fs/open.c:1442 [inline]
 __x64_sys_openat+0xf3/0x120 fs/open.c:1442
 x64_sys_call+0x1025/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:258
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

read to 0xffff888102eb3260 of 4 bytes by task 3498 on cpu 0:

 inode_get_ctime_nsec include/linux/fs.h:1623 [inline]
 inode_get_ctime include/linux/fs.h:1629 [inline]
 generic_fillattr+0x1dd/0x2f0 fs/stat.c:62
 shmem_getattr+0x17b/0x200 mm/shmem.c:1157
 vfs_getattr_nosec fs/stat.c:166 [inline]
 vfs_getattr+0x19b/0x1e0 fs/stat.c:207
 vfs_statx_path fs/stat.c:251 [inline]
 vfs_statx+0x134/0x2f0 fs/stat.c:315
 vfs_fstatat+0xec/0x110 fs/stat.c:341
 __do_sys_newfstatat fs/stat.c:505 [inline]
 __se_sys_newfstatat+0x58/0x260 fs/stat.c:499
 __x64_sys_newfstatat+0x55/0x70 fs/stat.c:499
 x64_sys_call+0x141f/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:263
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

value changed: 0x2755ae53 -> 0x27ee44d3

Reported by Kernel Concurrency Sanitizer on:

CPU: 0 UID: 0 PID: 3498 Comm: udevd Not tainted 6.11.0-rc6-syzkaller-00326-gd1f2d51b711a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
==================================================================

When calling generic_fillattr(), if you don't hold read lock, data-race will occur in inode member variables, which can cause unexpected behavior.

Since there is no special protection when shmem_getattr() calls generic_fillattr(), data-race occurs by functions such as shmem_unlink() or shmem_mknod(). This can cause unexpected results, so commenting it out is not enough.

Therefore, when calling generic_fillattr() from shmem_getattr(), it is appropriate to protect the inode using inode_lock_shared() and inode_unlock_shared() to prevent data-race.

---
 mm/shmem.c |    2 ++
 1 file changed, 2 insertions(+)
mm/shmem.c +2 -0
@@ -1077,7 +1077,9 @@ static int shmem_getattr(const struct pa
 		shmem_recalc_inode(inode);
 		spin_unlock_irq(&info->lock);
 	}
+	inode_lock_shared(inode);
 	generic_fillattr(inode, stat);
+	inode_unlock_shared(inode);
 
 	if (is_huge_enabled(sb_info))
 		stat->blksize = HPAGE_PMD_SIZE;
author maintainer
#108 lore raw

PATCH 107/110 Revert "drm/mipi-dsi: Set the fwnode for mipi_dsi_device"

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Jason-JH.Lin" <[email protected]>

This reverts commit 139c27648f8d3b2283f74715d8e7f0df7f5e55ca which is commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 upstream.

Reason for revert:
1. The commit [1] does not land on linux-5.15, so this patch does not fix anything.

2. Since the fw_devlink improvements series [2] does not land on linux-5.15, using device_set_fwnode() causes the panel to flash during bootup.

Incorrect link management may lead to incorrect device initialization, affecting firmware node links and consumer relationships. The fwnode setting of panel to the DSI device would cause a DSI initialization error without series[2], so this patch was reverted to avoid using the incomplete fw_devlink functionality.

[1] commit 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
[2] Link: https://lore.kernel.org/all/[email protected]

---
 drivers/gpu/drm/drm_mipi_dsi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/drm_mipi_dsi.c +1 -1
@@ -221,7 +221,7 @@ mipi_dsi_device_register_full(struct mip
 		return dsi;
 	}
 
-	device_set_node(&dsi->dev, of_fwnode_handle(info->node));
+	dsi->dev.of_node = info->node;
 	dsi->channel = info->channel;
 	strlcpy(dsi->name, info->type, sizeof(dsi->name));
 
author maintainer
#109 lore raw

PATCH 108/110 drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wachowski, Karol <[email protected]>

commit 39bc27bd688066a63e56f7f64ad34fae03fbe3b8 upstream.

Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));

Return -EINVAL early if COW mapping is detected.

This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0;

Fixes 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Cc Noralf Trønnes <[email protected]>
Cc Eric Anholt <[email protected]>
Cc Rob Herring <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc Thomas Zimmermann <[email protected]>
Cc David Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc <[email protected]> # v5.2+

[ Artem: bp to fix CVE-2024-39497, in order to adapt this patch to branch 5.10
add header file mm/internal.h]

---
 drivers/gpu/drm/drm_gem_shmem_helper.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/drm_gem_shmem_helper.c +5 -0
@@ -17,6 +17,8 @@
 #include <drm/drm_prime.h>
 #include <drm/drm_print.h>
 
+#include "../../../mm/internal.h"   /* is_cow_mapping() */
+
 /**
  * DOC: overview
  *
@@ -630,6 +632,9 @@ int drm_gem_shmem_mmap(struct drm_gem_ob
 		return ret;
 	}
 
+	if (is_cow_mapping(vma->vm_flags))
+		return -EINVAL;
+
 	shmem = to_drm_gem_shmem_obj(obj);
 
 	ret = drm_gem_shmem_get_pages(shmem);
author maintainer
#110 lore raw

PATCH 109/110 vt: prevent kernel-infoleak in con_font_get()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeongjun Park <[email protected]>

commit f956052e00de211b5c9ebaa1958366c23f82ee9e upstream.

font.data may not initialize all memory spaces depending on the implementation of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it is safest to modify it to initialize the allocated memory space to 0, and it generally does not affect the overall performance of the system.

Reported-by [email protected]
Fixes 05e2600cb0a4 ("VT: Bump font size limitation to 64x128 pixels")
---
 drivers/tty/vt/vt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/vt/vt.c +1 -1
@@ -4603,7 +4603,7 @@ static int con_font_get(struct vc_data *
 	int c;
 
 	if (op->data) {
-		font.data = kmalloc(max_font_size, GFP_KERNEL);
+		font.data = kzalloc(max_font_size, GFP_KERNEL);
 		if (!font.data)
 			return -ENOMEM;
 	} else
author maintainer
#111 lore raw

PATCH 110/110 mac80211: always have ieee80211_sta_restart()

In reply to Greg Kroah-Hartman

5.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

commit 3fa5a0f5b0d69e31c6476cd81afeca3cc25a4927 upstream.

When CONFIG_PM isn't defined we don't have the function ieee80211_sta_restart() compiled in, but we always need it now for firmware restart. Move it out of the ifdef.

Fixes 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart")
---
 net/mac80211/mlme.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/mlme.c +1 -1
@@ -4778,6 +4778,7 @@ void ieee80211_mgd_quiesce(struct ieee80
 
 	sdata_unlock(sdata);
 }
+#endif
 
 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
 {
@@ -4813,7 +4814,6 @@ void ieee80211_sta_restart(struct ieee80
 
 	sdata_unlock(sdata);
 }
-#endif
 
 /* interface setup */
 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
Tested-by on the v1 series
#112 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 5.10.229 release. There are 110 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
maintainer Tested-by on the v1 series
#113 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.229 release. There are 110 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 08 Nov 2024 12:02:47 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.229-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    67 tests:	67 pass, 0 fail

Linux version: 5.10.229-rc1-g3cfcc23ba585
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by on the v1 series
#114 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.229 release. There are 110 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 08 Nov 2024 12:02:47 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.229-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

On a 64-bit ARM kernel, this warning is seen:

In file included from ./include/linux/mm.h:30,

                 from ./include/linux/pagemap.h:8,
                 from ./include/linux/buffer_head.h:14,
                 from fs/udf/udfdecl.h:12,
                 from fs/udf/super.c:41:
fs/udf/super.c: In function 'udf_fill_partdesc_info':
./include/linux/overflow.h:70:15: warning: comparison of distinct pointer types lacks a cast
  (void) (&__a == &__b);   \
               ^~
fs/udf/super.c:1155:7: note: in expansion of macro 'check_add_overflow'
   if (check_add_overflow(map->s_partition_len,
       ^~~~~~~~~~~~~~~~~~
Signature · 1 line
Florian
Tested-by Linux Kernel Functional Testing on the v1 series
#115 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.10.229 release. There are 110 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 08 Nov 2024 12:02:47 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.229-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.10.229-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 5d5f7338c1ba5235530d3a6b68406996feb2f021
* git describe: v5.10.227-164-g5d5f7338c1ba
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.227-164-g5d5f7338c1ba

## Test Regressions (compared to v5.10.227-53-g11656f6fe2df)

## Metric Regressions (compared to v5.10.227-53-g11656f6fe2df)

## Test Fixes (compared to v5.10.227-53-g11656f6fe2df)

## Metric Fixes (compared to v5.10.227-53-g11656f6fe2df)

## Test result summary
total: 59570, pass: 43633, fail: 1918, skip: 13945, xfail: 74

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 102 total, 102 passed, 0 failed
* arm64: 29 total, 29 passed, 0 failed
* i386: 23 total, 23 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* parisc: 3 total, 0 passed, 3 failed
* powerpc: 23 total, 23 passed, 0 failed
* riscv: 9 total, 9 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 25 total, 25 passed, 0 failed

## Test suites summary
* boot
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-watchdog
* kselftest-x86
* kunit
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

#117 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 8 lines

This is the start of the stable review cycle for the 5.10.229 release. There are 110 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Christoph Hellwig <[email protected]>
mm: add remap_pfn_range_notrack

This describes i915 horrors that need the function, but we don't seem to have i915 horrors in 5.10, and I don't see remap_pfn_range_notrack() used.

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany