initramfs: kunit tests and cleanups
Subsystems (4)
v2 cover initramfs: kunit tests and cleanups
This patchset adds basic kunit test coverage for initramfs unpacking and cleans up some minor buffer handling issues / inefficiencies.
Changes since v2 (patch 2 only):
- fix !CONFIG_INITRAMFS_PRESERVE_MTIME kunit test checks
- add test MODULE_DESCRIPTION(), as suggested by Jeff Johnson
- add some missing headers, reported by kernel test robot
Changes since v1 (RFC):
- rebase atop v6.12-rc6 and filename field overrun fix from
https://lore.kernel.org/r/[email protected]
- add unit test coverage (new patches 1 and 2)
- add patch: fix hardlink hash leak without TRAILER
- rework patch: avoid static buffer for error message
+ drop unnecessary message propagation
- drop patch: cpio_buf reuse for built-in and bootloader initramfs
+ no good justification for the change
Feedback appreciated.
David Disseldorp (9):
init: add initramfs_internal.h
initramfs_test: kunit tests for initramfs unpacking
vsprintf: add simple_strntoul
initramfs: avoid memcpy for hex header fields
initramfs: remove extra symlink path buffer
initramfs: merge header_buf and name_buf
initramfs: reuse name_len for dir mtime tracking
initramfs: fix hardlink hash leak without TRAILER
initramfs: avoid static buffer for error message
include/linux/kstrtox.h | 1 + init/.kunitconfig | 3 + init/Kconfig | 7 + init/Makefile | 1 + init/initramfs.c | 73 +++++---- init/initramfs_internal.h | 8 + init/initramfs_test.c | 403 ++++++++++++++++++++++++++++++++++++++++++++++ lib/vsprintf.c | 7 + 8 files changed, 471 insertions(+), 32 deletions(-) create mode 100644 init/.kunitconfig create mode 100644 init/initramfs_internal.h create mode 100644 init/initramfs_test.c
PATCH v3 1/9 init: add initramfs_internal.h
The new header only exports a single unpack function and a CPIO_HDRLEN constant for future test use.
--- init/initramfs.c | 16 +++++++++++++--- init/initramfs_internal.h | 8 ++++++++ 2 files changed, 21 insertions(+), 3 deletions(-) create mode 100644 init/initramfs_internal.h
init/initramfs.c +13 -3
@@ -20,6 +20,7 @@#include <linux/security.h> #include "do_mounts.h" +#include "initramfs_internal.h" static __initdata bool csum_present;static __initdata u32 io_csum;
@@ -256,7 +257,7 @@ static __initdata char *header_buf, *symlink_buf, *name_buf;static int __init do_start (void ) { -read_into (header_buf,110 , GotHeader); +read_into (header_buf,CPIO_HDRLEN , GotHeader);return 0 ; }
@@ -497,14 +498,23 @@ static unsigned long my_inptr __initdata; /* index of next byte to be processed#include <linux/decompress/generic.h> -static char *__init unpack_to_rootfs (char *buf,unsigned long len) +/** +* unpack_to_rootfs - decompress and extract an initramfs archive +* @buf: input initramfs archive to extract +* @len: length of initramfs data to process +* +* Returns: NULL for success or an error message string +* +* This symbol shouldn't be used externally. It's available for unit tests. +*/ +char *__init unpack_to_rootfs (char *buf,unsigned long len) {long written;decompress_fn decompress;const char *compress_name;static __initdata char msg_buf[64 ]; - header_buf =kmalloc (110 ,GFP_KERNEL ); + header_buf =kmalloc (CPIO_HDRLEN ,GFP_KERNEL ); symlink_buf =kmalloc (PATH_MAX +N_ALIGN (PATH_MAX ) +1 ,GFP_KERNEL ); name_buf =kmalloc (N_ALIGN (PATH_MAX ),GFP_KERNEL );
init/initramfs_internal.h new file +8 -0
@@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +#ifndef __INITRAMFS_INTERNAL_H__ +#define __INITRAMFS_INTERNAL_H__ + +char *unpack_to_rootfs (char *buf,unsigned long len); +#define CPIO_HDRLEN 110 + +#endif
Signature · 1 line
2.43.0
PATCH v3 2/9 initramfs_test: kunit tests for initramfs unpacking
In reply to David DisseldorpProvide some basic initramfs unpack sanity tests covering:
- simple file / dir extraction
- filename field overrun, as reported and fixed separately via
https://lore.kernel.org/r/[email protected]
- "070702" cpio data checksums
- hardlinks
--- init/.kunitconfig | 3 + init/Kconfig | 7 + init/Makefile | 1 + init/initramfs_test.c | 408 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 419 insertions(+) create mode 100644 init/.kunitconfig create mode 100644 init/initramfs_test.c
init/.kunitconfig new file +3 -0
@@ -0,0 +1,3 @@ +CONFIG_KUNIT=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_TEST=y
init/Kconfig +7 -0
@@ -1431,6 +1431,13 @@ config INITRAMFS_PRESERVE_MTIME If unsure, say Y. +config INITRAMFS_TEST + bool "Test initramfs cpio archive extraction" if !KUNIT_ALL_TESTS + depends on BLK_DEV_INITRD && KUNIT=y + default KUNIT_ALL_TESTS + help + Build KUnit tests for initramfs. See Documentation/dev-tools/kunit + choice prompt "Compiler optimization level" default CC_OPTIMIZE_FOR_PERFORMANCE
init/Makefile +1 -0
@@ -12,6 +12,7 @@ else obj-$(CONFIG_BLK_DEV_INITRD) += initramfs.o endif obj-$(CONFIG_GENERIC_CALIBRATE_DELAY) += calibrate.o +obj-$(CONFIG_INITRAMFS_TEST) += initramfs_test.o obj-y += init_task.o
init/initramfs_test.c new file +408 -0
408 lines not on this page · raw message
Signature · 1 line
2.43.0
kernel test robot
build botRe: [PATCH v3 2/9] initramfs_test: kunit tests for initramfs unpacking
kernel test robot noticed the following build warnings:
Hi David,
kernel test robot noticed the following build warnings:
[auto build test WARNING on akpm-mm/mm-nonmm-unstable]
[also build test WARNING on brauner-vfs/vfs.all linus/master v6.12-rc6 next-20241108] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/David-Disseldorp/init-add-initramfs_internal-h/20241107-083002 base: https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-nonmm-unstable patch link: https://lore.kernel.org/r/20241107002044.16477-3-ddiss%40suse.de patch subject: [PATCH v3 2/9] initramfs_test: kunit tests for initramfs unpacking config: sh-randconfig-r122-20241108 (https://download.01.org/0day-ci/archive/20241109/[email protected]/config) compiler: sh4-linux-gcc (GCC) 14.2.0 reproduce: (https://download.01.org/0day-ci/archive/20241109/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>, old ones prefixed by <<):
>> WARNING: modpost: vmlinux: section mismatch in reference: initramfs_test_cases+0x0 (section: .data) -> set_reset_devices (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: initramfs_test_cases+0x1c (section: .data) -> set_reset_devices (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: initramfs_test_cases+0x38 (section: .data) -> set_reset_devices (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: initramfs_test_cases+0x54 (section: .data) -> set_reset_devices (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: initramfs_test_cases+0x70 (section: .data) -> set_reset_devices (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: initramfs_test_cases+0x8c (section: .data) -> set_reset_devices (section: .init.text)
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
PATCH v3 3/9 vsprintf: add simple_strntoul
In reply to David Disseldorpcpio extraction currently does a memcpy to ensure that the archive hex fields are null terminated for simple_strtoul(). simple_strntoul() will allow us to avoid the memcpy.
--- include/linux/kstrtox.h | 1 + lib/vsprintf.c | 7 +++++++ 2 files changed, 8 insertions(+)
include/linux/kstrtox.h +1 -0
@@ -143,6 +143,7 @@ static inline int __must_check kstrtos32_from_user(const char __user *s, size_t*/ extern unsigned long simple_strtoul (const char *,char **,unsigned int ); +extern unsigned long simple_strntoul (const char *,char **,unsigned int ,size_t );extern long simple_strtol (const char *,char **,unsigned int );extern unsigned long long simple_strtoull (const char *,char **,unsigned int );extern long long simple_strtoll (const char *,char **,unsigned int );
lib/vsprintf.c +7 -0
@@ -114,6 +114,13 @@ unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base) }EXPORT_SYMBOL (simple_strtoul); +unsigned long simple_strntoul (const char *cp,char **endp,unsigned int base, +size_t max_chars) +{ +return simple_strntoull (cp, endp, base, max_chars); +} +EXPORT_SYMBOL (simple_strntoul); +/** * simple_strtol - convert a string to a signed long * @cp: The start of the string
Signature · 1 line
2.43.0
PATCH v3 4/9 initramfs: avoid memcpy for hex header fields
In reply to David Disseldorpnewc/crc cpio headers contain a bunch of 8-character hexadecimal fields which we convert via simple_strtoul(), following memcpy() into a zero-terminated stack buffer. The new simple_strntoul() helper allows us to pass in max_chars=8 to avoid zero-termination and memcpy().
--- init/initramfs.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
init/initramfs.c +3 -6
@@ -189,14 +189,11 @@ static __initdata u32 hdr_csum;static void __init parse_header (char *s) {unsigned long parsed[13 ]; -char buf[9 ];int i; - buf[8 ] ='\0' ; -for (i =0 , s +=6 ; i <13 ; i++, s +=8 ) { -memcpy (buf, s,8 ); - parsed[i] =simple_strtoul (buf,NULL ,16 ); - } +for (i =0 , s +=6 ; i <13 ; i++, s +=8 ) + parsed[i] =simple_strntoul (s,NULL ,16 ,8 ); + ino = parsed[0 ]; mode = parsed[1 ]; uid = parsed[2 ];
Signature · 1 line
2.43.0
PATCH v3 5/9 initramfs: remove extra symlink path buffer
In reply to David DisseldorpA (newc/crc) cpio entry with mode.S_IFLNK set carries the symlink target in the cpio data segment, following the padded name_len sized file path. symlink_buf is heap-allocated for staging both file path and symlink target, while name_buf is additionally allocated for staging paths for non-symlink cpio entries.
Separate symlink / non-symlink buffers are unnecessary, so just extend the size of name_buf and use it for both.
--- init/initramfs.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
init/initramfs.c +5 -7
@@ -250,7 +250,7 @@ static void __init read_into(char *buf, unsigned size, enum state next) } } -static __initdata char *header_buf, *symlink_buf, *name_buf; +static __initdata char *header_buf, *name_buf;static int __init do_start (void ) {
@@ -294,7 +294,7 @@ static int __init do_header(void)if (S_ISLNK (mode)) {if (body_len >PATH_MAX )return 0 ; - collect = collected = symlink_buf; + collect = collected = name_buf; remains =N_ALIGN (name_len) + body_len; next_state = GotSymlink; state = Collect;
@@ -512,10 +512,9 @@ char * __init unpack_to_rootfs(char *buf, unsigned long len)static __initdata char msg_buf[64 ]; header_buf =kmalloc (CPIO_HDRLEN ,GFP_KERNEL ); - symlink_buf =kmalloc (PATH_MAX +N_ALIGN (PATH_MAX ) +1 ,GFP_KERNEL ); - name_buf =kmalloc (N_ALIGN (PATH_MAX ),GFP_KERNEL ); - -if (!header_buf || !symlink_buf || !name_buf) +/* 2x PATH_MAX as @name_buf is also used for staging symlink targets */ + name_buf =kmalloc (N_ALIGN (PATH_MAX ) +PATH_MAX +1 ,GFP_KERNEL ); +if (!header_buf || !name_buf)panic_show_mem ("can't allocate buffers" ); state = Start;
@@ -561,7 +560,6 @@ char * __init unpack_to_rootfs(char *buf, unsigned long len) }dir_utime ();kfree (name_buf); -kfree (symlink_buf);kfree (header_buf);return message; }
Signature · 1 line
2.43.0
PATCH v3 6/9 initramfs: merge header_buf and name_buf
In reply to David Disseldorpheader_buf is only used in FSM states up to GotHeader, while name_buf is only used in states following GotHeader (Collect is shared, but the collect pointer tracks each buffer). These buffers can therefore be combined into a single cpio_buf, which can be used for both header and file name storage.
--- init/initramfs.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-)
init/initramfs.c +15 -11
@@ -250,11 +250,11 @@ static void __init read_into(char *buf, unsigned size, enum state next) } } -static __initdata char *header_buf, *name_buf; +static __initdata char *cpio_buf;static int __init do_start (void ) { -read_into (header_buf,CPIO_HDRLEN , GotHeader); +read_into (cpio_buf,CPIO_HDRLEN , GotHeader);return 0 ; }
@@ -294,14 +294,14 @@ static int __init do_header(void)if (S_ISLNK (mode)) {if (body_len >PATH_MAX )return 0 ; - collect = collected = name_buf; + collect = collected = cpio_buf; remains =N_ALIGN (name_len) + body_len; next_state = GotSymlink; state = Collect;return 0 ; }if (S_ISREG (mode) || !body_len) -read_into (name_buf,N_ALIGN (name_len), GotName); +read_into (cpio_buf,N_ALIGN (name_len), GotName);return 0 ; }
@@ -511,11 +511,16 @@ char * __init unpack_to_rootfs(char *buf, unsigned long len)const char *compress_name;static __initdata char msg_buf[64 ]; - header_buf =kmalloc (CPIO_HDRLEN ,GFP_KERNEL ); -/* 2x PATH_MAX as @name_buf is also used for staging symlink targets */ - name_buf =kmalloc (N_ALIGN (PATH_MAX ) +PATH_MAX +1 ,GFP_KERNEL ); -if (!header_buf || !name_buf) -panic_show_mem ("can't allocate buffers" ); +/* +* @cpio_buf can be used for staging the 110 byte newc/crc cpio header, +* after which parse_header() converts and stashes fields into +* corresponding types. The same buffer can then be reused for file +* path staging. 2 x PATH_MAX covers any possible symlink target. +*/ +BUILD_BUG_ON (CPIO_HDRLEN >N_ALIGN (PATH_MAX ) +PATH_MAX +1 ); + cpio_buf =kmalloc (N_ALIGN (PATH_MAX ) +PATH_MAX +1 ,GFP_KERNEL ); +if (!cpio_buf) +panic_show_mem ("can't allocate buffer" ); state = Start; this_header =0 ;
@@ -559,8 +564,7 @@ char * __init unpack_to_rootfs(char *buf, unsigned long len) len -= my_inptr; }dir_utime (); -kfree (name_buf); -kfree (header_buf); +kfree (cpio_buf);return message; }
Signature · 1 line
2.43.0
PATCH v3 7/9 initramfs: reuse name_len for dir mtime tracking
In reply to David DisseldorpWe already have a nulterm-inclusive, checked name_len for the directory name, so use that instead of calling strlen().
--- init/initramfs.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
init/initramfs.c +3 -4
@@ -144,9 +144,8 @@ struct dir_entry {char name[]; }; -static void __init dir_add (const char *name,time64_t mtime) +static void __init dir_add (const char *name,size_t nlen,time64_t mtime) { -size_t nlen =strlen (name) +1 ;struct dir_entry *de; de =kmalloc (sizeof (struct dir_entry ) + nlen,GFP_KERNEL );
@@ -170,7 +169,7 @@ static void __init dir_utime(void)#else static void __init do_utime (char *filename,time64_t mtime) {}static void __init do_utime_path (const struct path *path,time64_t mtime) {} -static void __init dir_add (const char *name,time64_t mtime) {} +static void __init dir_add (const char *name,size_t nlen,time64_t mtime) {}static void __init dir_utime (void ) {}#endif
@@ -394,7 +393,7 @@ static int __init do_name(void)init_mkdir (collected, mode);init_chown (collected, uid, gid,0 );init_chmod (collected, mode); -dir_add (collected, mtime); +dir_add (collected, name_len, mtime); }else if (S_ISBLK (mode) ||S_ISCHR (mode) ||S_ISFIFO (mode) ||S_ISSOCK (mode)) {if (maybe_link () ==0 ) {
Signature · 1 line
2.43.0
PATCH v3 8/9 initramfs: fix hardlink hash leak without TRAILER
In reply to David DisseldorpCovered in Documentation/driver-api/early-userspace/buffer-format.rst , initramfs archives can carry an optional "TRAILER!!!" entry which serves as a boundary for collecting and associating hardlinks with matching inode and major / minor device numbers.
Although optional, if hardlinks are found in an archive without a subsequent "TRAILER!!!" entry then the hardlink state hash table is leaked, e.g. unfixed kernel, with initramfs_test.c hunk applied only:
unreferenced object 0xffff9405408cc000 (size 8192):
comm "kunit_try_catch", pid 53, jiffies 4294892519
hex dump (first 32 bytes):
01 00 00 00 01 00 00 00 00 00 00 00 ff 81 00 00 ................
00 00 00 00 00 00 00 00 69 6e 69 74 72 61 6d 66 ........initramf
backtrace (crc a9fb0ee0):
[<0000000066739faa>] __kmalloc_cache_noprof+0x11d/0x250
[<00000000fc755219>] maybe_link.part.5+0xbc/0x120
[<000000000526a128>] do_name+0xce/0x2f0
[<00000000145c1048>] write_buffer+0x22/0x40
[<000000003f0b4f32>] unpack_to_rootfs+0xf9/0x2a0
[<00000000d6f7e5af>] initramfs_test_hardlink+0xe3/0x3f0
[<0000000014fde8d6>] kunit_try_run_case+0x5f/0x130
[<00000000dc9dafc5>] kunit_generic_run_threadfn_adapter+0x18/0x30
[<000000001076c239>] kthread+0xc8/0x100
[<00000000d939f1c1>] ret_from_fork+0x2b/0x40
[<00000000f848ad1a>] ret_from_fork_asm+0x1a/0x30Fix this by calling free_hash() after initramfs buffer processing in unpack_to_rootfs(). An extra hardlink_seen global is added as an optimization to avoid walking the 32 entry hash array unnecessarily. The expectation is that a "TRAILER!!!" entry will normally be present, and initramfs hardlinks are uncommon.
There is one user facing side-effect of this fix: hardlinks can currently be associated across built-in and external initramfs archives, *if* the built-in initramfs archive lacks a "TRAILER!!!" terminator. I'd consider this cross-archive association broken, but perhaps it's used.
--- init/initramfs.c | 7 ++++++- init/initramfs_test.c | 5 ----- 2 files changed, 6 insertions(+), 6 deletions(-)
init/initramfs.c +6 -1
@@ -76,6 +76,7 @@ static __initdata struct hash {struct hash *next;char name[N_ALIGN (PATH_MAX )]; } *head[32 ]; +static __initdata bool hardlink_seen;static inline int hash (int major,int minor,int ino) {
@@ -109,19 +110,21 @@ static char __init *find_link(int major, int minor, int ino,strcpy (q->name, name); q->next =NULL ; *p = q; + hardlink_seen = true;return NULL ; }static void __init free_hash (void ) {struct hash **p, *q; -for (p = head; p < head +32 ; p++) { +for (p = head; hardlink_seen && p < head +32 ; p++) {while (*p) { q = *p; *p = q->next;kfree (q); } } + hardlink_seen = false; }#ifdef CONFIG_INITRAMFS_PRESERVE_MTIME
@@ -563,6 +566,8 @@ char * __init unpack_to_rootfs(char *buf, unsigned long len) len -= my_inptr; }dir_utime (); +/* free any hardlink state collected without optional TRAILER!!! */ +free_hash ();kfree (cpio_buf);return message; }
init/initramfs_test.c +0 -5
@@ -319,11 +319,6 @@ static void __init initramfs_test_hardlink(struct kunit *test) .namesize = sizeof("initramfs_test_hardlink_link"), .fname = "initramfs_test_hardlink_link", .data = "ASDF", - }, { -/* hardlink hashtable leaks when the archive omits a trailer */ - .magic = "070701", - .namesize = sizeof("TRAILER!!!"), - .fname = "TRAILER!!!", } }; cpio_srcbuf =kmalloc (8192 ,GFP_KERNEL );
Signature · 1 line
2.43.0
Re: [PATCH v3 8/9] initramfs: fix hardlink hash leak without TRAILER
Quoted 8 lines · David Disseldorp
Covered in
Documentation/driver-api/early-userspace/buffer-format.rst, initramfs archives can carry an optional "TRAILER!!!" entry which serves as a boundary for collecting and associating hardlinks with matching inode and major / minor device numbers.Although optional, if hardlinks are found in an archive without a subsequent "TRAILER!!!" entry then the hardlink state hash table is leaked
One further leak is possible if extraction ends prior to fput(wfile) in CopyFile state, e.g. due to lack of data:
nilchar="\0"
data="123456789ABCDEF"
magic="070701"
ino=1
mode=$(( 0100777 ))
uid=0
gid=0
nlink=1
mtime=1
filesize=$(( ${#data} + 20 )) # too much
devmajor=0
devminor=1
rdevmajor=0
rdevminor=0
csum=0
fname="initramfs_test_archive_overrun"
namelen=$(( ${#fname} + 1 )) # plus one to account for terminator
printf "%s%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%s" \
$magic $ino $mode $uid $gid $nlink $mtime $filesize \
$devmajor $devminor $rdevmajor $rdevminor $namelen $csum $fname
termpadlen=$(( 1 + ((4 - ((110 + $namelen) & 3)) % 4) ))
printf "%.s${nilchar}" $(seq 1 $termpadlen)
# $filesize reaches 20 bytes beyond end of data
printf "%s" "$data"bash data_repro.sh|gzip >> initramfs
unreferenced object 0xffff8fdb0192e000 (size 176):
comm "kworker/u8:0", pid 11, jiffies 4294892503 hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 1e 80 5d 00 ..............].
80 7d a1 a7 ff ff ff ff 10 b1 2f 02 db 8f ff ff .}......../.....
backtrace (crc 807bd733):
[<00000000e68e8b32>] kmem_cache_alloc_noprof+0x11e/0x260
[<00000000a6f24fcd>] alloc_empty_file+0x45/0x120
[<00000000130beec8>] path_openat+0x2f/0xf30
[<0000000024613ad7>] do_filp_open+0xa7/0x110
[<000000005f4f0158>] file_open_name+0x118/0x180
[<0000000003ed573f>] filp_open+0x27/0x50
[<0000000091ec9e44>] do_name+0xc4/0x2b0
[<000000008e084ec8>] write_buffer+0x22/0x40
[<000000002ea2ff4b>] flush_buffer+0x2f/0x90
[<000000009085f8b5>] gunzip+0x25a/0x310
[<000000000c1c83c3>] unpack_to_rootfs+0x176/0x2a0
[<00000000c966fda5>] do_populate_rootfs+0x6a/0x180
[<0000000051fb877d>] async_run_entry_fn+0x31/0x120
[<00000000a3ee305f>] process_scheduled_works+0xbe/0x310
[<0000000083c835bb>] worker_thread+0x100/0x240
[<000000006ea2f0b3>] kthread+0xc8/0x100Not sure whether others are interested in seeing these kinds of leak-on-malformed-archive bugs fixed, but I'll send through a v4 with a fix + unit test for it.
PATCH v3 9/9 initramfs: avoid static buffer for error message
In reply to David DisseldorpThe dynamic error message printed if CONFIG_RD_$ALG compression support is missing needn't be propagated up to the caller via a static buffer. Print it immediately via pr_err() and set @message to a const string to flag error.
Before:
text data bss dec hex filename
7695 1102 8 8805 2265 ./init/initramfs.o
After:
text data bss dec hex filename
7683 1006 8 8697 21f9 ./init/initramfs.o
--- init/initramfs.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
init/initramfs.c +3 -7
@@ -511,7 +511,6 @@ char * __init unpack_to_rootfs(char *buf, unsigned long len)long written;decompress_fn decompress;const char *compress_name; -static __initdata char msg_buf[64 ];/* * @cpio_buf can be used for staging the 110 byte newc/crc cpio header,
@@ -551,12 +550,9 @@ char * __init unpack_to_rootfs(char *buf, unsigned long len)if (res)error ("decompressor failed" ); }else if (compress_name) { -if (!message) { -snprintf (msg_buf,sizeof msg_buf, -"compression method %s not configured" , - compress_name); - message = msg_buf; - } +pr_err ("compression method %s not configured\n" , + compress_name); +error ("decompressor failed" ); }else error ("invalid magic at start of compressed archive" );if (state != Reset)
Signature · 1 line
2.43.0