tst_cgroup.c: Force tst_cg_scan only scan specific cgroup version if needs_ver exist
PATCH 1/1 tst_cgroup.c: Force tst_cg_scan only scan specific cgroup version if needs_ver exist
tst_cgroup.c will scan cgroup mount point and check system's cgroup support status, both cgroupv1 and cgroupv2, if your case only need check cgroupv1(such as needs_cgroup_ver = TST_CG_V1) but your system contain cgroupv2 mount point, then TCONF will happen tell you your system already mount cgroupv2, so test case will be skipped.
This change will fix above scenario, force check specific version of cgroup once you set needs_ver, then test will continue try to create needs_ver of cgroup mount point.
This patch can be used by following cpuset02 case:
https://patchwork.ozlabs.org/project/ltp/patch/[email protected]/
--- include/tst_cgroup.h | 2 +- lib/newlib_tests/tst_cgroup01.c | 2 +- lib/newlib_tests/tst_cgroup02.c | 2 +- lib/tst_cgroup.c | 15 +++++++-------- testcases/lib/tst_cgctl.c | 4 ++-- 5 files changed, 12 insertions(+), 13 deletions(-)
include/tst_cgroup.h +1 -1
@@ -117,7 +117,7 @@ extern const struct tst_cg_group *const tst_cg_drain;/* Search the system for mounted cgroups and available * controllers. Called automatically by tst_cg_require. */ -void tst_cg_scan (void ); +void tst_cg_scan (enum tst_cg_ver needs_ver);/* Print the config detected by tst_cg_scan and print the internal * state associated with each controller. Output can be passed to * tst_cg_load_config to configure the internal state to that of the
lib/newlib_tests/tst_cgroup01.c +1 -1
@@ -23,7 +23,7 @@ static void setup(void) { cgopts.needs_ver = !!only_mount_v1 ?TST_CG_V1 :0 ; -tst_cg_scan (); +tst_cg_scan (0 );tst_cg_print_config ();tst_cg_require ("memory" , &cgopts);
lib/newlib_tests/tst_cgroup02.c +1 -1
@@ -58,7 +58,7 @@ static void setup(void) { cgopts.needs_ver = !!only_mount_v1 ?TST_CG_V1 :0 ; -tst_cg_scan (); +tst_cg_scan (0 );tst_cg_print_config ();tst_cg_require ("memory" , &cgopts);
lib/tst_cgroup.c +7 -8
@@ -657,7 +657,7 @@ discard:close (mnt_dfd); } -void tst_cg_scan (void ) +void tst_cg_scan (enum tst_cg_ver needs_ver) {struct mntent *mnt;FILE *f =setmntent ("/proc/self/mounts" ,"r" );
@@ -674,10 +674,9 @@ void tst_cg_scan(void) }do { -if (strncmp (mnt->mnt_type,"cgroup" ,6 )) -continue ; - -cgroup_root_scan (mnt->mnt_type, mnt->mnt_dir, mnt->mnt_opts); +if ((!strcmp (mnt->mnt_type,"cgroup" ) && (needs_ver !=TST_CG_V2 )) || + (!strcmp (mnt->mnt_type,"cgroup2" ) && (needs_ver !=TST_CG_V1 ))) +cgroup_root_scan (mnt->mnt_type, mnt->mnt_dir, mnt->mnt_opts); }while ((mnt =getmntent (f))); }
@@ -717,7 +716,7 @@ mount:if (!ret) {tst_res (TINFO ,"Mounted V2 CGroups on %s" , mnt_path); -tst_cg_scan (); +tst_cg_scan (TST_CG_V2 ); roots[0 ].we_mounted_it =1 ;return ; }
@@ -775,7 +774,7 @@ mount: }tst_res (TINFO ,"Mounted V1 %s CGroup on %s" , ctrl->ctrl_name, mnt_path); -tst_cg_scan (); +tst_cg_scan (TST_CG_V1 );if (!ctrl->ctrl_root)return ;
@@ -856,7 +855,7 @@ void tst_cg_require(const char *const ctrl_name,if (ctrl->ctrl_root) goto mkdirs; -tst_cg_scan (); +tst_cg_scan (options->needs_ver);if (ctrl->ctrl_root) goto mkdirs;
testcases/lib/tst_cgctl.c +2 -2
@@ -30,7 +30,7 @@ static int cgctl_require(const char *ctrl, int test_pid)static int cgctl_cleanup (const char *const config) { -tst_cg_scan (); +tst_cg_scan (0 );tst_cg_load_config (config);tst_cg_cleanup ();
@@ -39,7 +39,7 @@ static int cgctl_cleanup(const char *const config)static int cgctl_print (void ) { -tst_cg_scan (); +tst_cg_scan (0 );tst_cg_print_config ();return 0 ;
Signature · 5 lines
2.35.3 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Hi!
Quoted 4 lines
tst_cgroup.cwill scan cgroup mount point and check system's cgroup support status, both cgroupv1 and cgroupv2, if your case only need checkcgroupv1(such as needs_cgroup_ver = TST_CG_V1)but your system contain cgroupv2 mount point, then TCONF will happen tell you your system already mount cgroupv2, so test case will be skipped.
I do not get what happens here. What is the exact test output that does not work for you?
We have tst_cg_require() which attempts to mount either v1 or v2 as described in options. However a controller can be mouted either in v1 or v2 but not in both, so skipping the scan will not solve anything.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Quoted 8 lines · Cyril Hrubis
Hi!
Quoted 4 lines
tst_cgroup.cwill scan cgroup mount point and check system's cgroup support status, both cgroupv1 and cgroupv2, if your case only need checkcgroupv1(such as needs_cgroup_ver = TST_CG_V1)but your system contain cgroupv2 mount point, then TCONF will happen tell you your system already mount cgroupv2, so test case will be skipped.I do not get what happens here. What is the exact test output that does not work for you?
If you add .needs_cgroup_ver = TST_CG_V1 in cpuset02.c and running on sle-micro you will hit
https://github.com/linux-test-project/ltp/blob/6408294d83682635393e36c14bbd6ebd94fead94/lib/tst_cgroup.c#L892
Since sle-micro platform already create cgroupv2 mount point, the tst_cg_scan will get cgroupv2 info and will not call cgroup_mount_v1.
Quoted 8 lines
We have
tst_cg_require()which attempts to mount either v1 or v2 as described in options. However a controller can be mouted either in v1 or v2 but not in both, so skipping the scan will not solve anything.Signature · 2 lines
Cyril Hrubis [email protected]
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Hi!
Quoted 5 lines
If you add .needs_cgroup_ver =
TST_CG_V1incpuset02.cand running on sle-micro you will hit
https://github.com/linux-test-project/ltp/blob/6408294d83682635393e36c14bbd6ebd94fead94/lib/tst_cgroup.c#L892Since sle-micro platform already create cgroupv2 mount point, the
tst_cg_scanwill get cgroupv2 info and will not callcgroup_mount_v1.
And that is, as far as I can tell, correct. You cannot mount a controller under v1 when it was already mounted under v2.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Quoted 9 lines · Cyril Hrubis
Hi!
Quoted 5 lines
If you add .needs_cgroup_ver =
TST_CG_V1incpuset02.cand running on sle-micro you will hit
https://github.com/linux-test-project/ltp/blob/6408294d83682635393e36c14bbd6ebd94fead94/lib/tst_cgroup.c#L892Since sle-micro platform already create cgroupv2 mount point, the
tst_cg_scanwill get cgroupv2 info and will not callcgroup_mount_v1.And that is, as far as I can tell, correct. You cannot mount a controller under v1 when it was already mounted under v2.
On sle-micro 6.1, you can mount v1 controller when it was already mounted under v2 And after you force mount v1 cpuset controller, the v2 cpuset controller will be removed
localhost:~ # mount | grep cgroup
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot)
localhost:~ # ll /sys/fs/cgroup/
total 0
-r--r--r-- 1 root root 0 Nov 11 01:39 cgroup.controllers -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.depth -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.descendants -rw-r--r-- 1 root root 0 Nov 11 01:39 cgroup.procs -r--r--r-- 1 root root 0 Nov 11 01:44 cgroup.stat -rw-r--r-- 1 root root 0 Nov 11 01:39 cgroup.subtree_control -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.threads -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat.local -r--r--r-- 1 root root 0 Nov 11 01:44 cpuset.cpus.effective <<<< -r--r--r-- 1 root root 0 Nov 11 01:44 cpuset.mems.effective <<<< drwxr-xr-x 2 root root 0 Nov 11 01:39 dev-hugepages.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 dev-mqueue.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 init.scope -rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.model -rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.qos -r--r--r-- 1 root root 0 Nov 11 01:44 io.stat drwxr-xr-x 2 root root 0 Nov 11 01:39 machine.slice -r--r--r-- 1 root root 0 Nov 11 01:44 memory.numa_stat --w------- 1 root root 0 Nov 11 01:44 memory.reclaim -r--r--r-- 1 root root 0 Nov 11 01:44 memory.stat -r--r--r-- 1 root root 0 Nov 11 01:44 misc.capacity drwxr-xr-x 2 root root 0 Nov 11 01:39 proc-fs-nfsd.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-fs-fuse-connections.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-config.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-debug.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-tracing.mount
drwxr-xr-x 40 root root 0 Nov 11 01:42 system.slice drwxr-xr-x 2 root root 0 Nov 11 01:39 user.slice
localhost:/tmp # mkdir /var/tmp/cpuset
localhost:/tmp # mount -t cgroup -o cpuset cpuset /var/tmp/cpuset <<<<<< localhost:/tmp # ll /var/tmp/cpuset/
total 0
-rw-r--r-- 1 root root 0 Nov 11 01:53 cgroup.clone_children -rw-r--r-- 1 root root 0 Nov 11 01:53 cgroup.procs
-r--r--r-- 1 root root 0 Nov 11 01:53 cgroup.sane_behavior -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.cpu_exclusive -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.cpus
-r--r--r-- 1 root root 0 Nov 11 01:53 cpuset.effective_cpus -r--r--r-- 1 root root 0 Nov 11 01:53 cpuset.effective_mems -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.mem_exclusive -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.mem_hardwall -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_migrate -r--r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_pressure -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_pressure_enabled -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_spread_page -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_spread_slab -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.mems
-rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.sched_load_balance <<<<<< -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.sched_relax_domain_level -rw-r--r-- 1 root root 0 Nov 11 01:53 notify_on_release -rw-r--r-- 1 root root 0 Nov 11 01:53 release_agent -rw-r--r-- 1 root root 0 Nov 11 01:53 tasks
localhost:/tmp # ll /sys/fs/cgroup/
total 0
-r--r--r-- 1 root root 0 Nov 11 01:44 cgroup.controllers -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.depth -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.descendants -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.procs -r--r--r-- 1 root root 0 Nov 11 01:44 cgroup.stat -rw-r--r-- 1 root root 0 Nov 11 01:39 cgroup.subtree_control -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.threads -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat.local drwxr-xr-x 2 root root 0 Nov 11 01:39 dev-hugepages.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 dev-mqueue.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 init.scope -rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.model -rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.qos -r--r--r-- 1 root root 0 Nov 11 01:44 io.stat drwxr-xr-x 2 root root 0 Nov 11 01:39 machine.slice -r--r--r-- 1 root root 0 Nov 11 01:44 memory.numa_stat --w------- 1 root root 0 Nov 11 01:44 memory.reclaim -r--r--r-- 1 root root 0 Nov 11 01:44 memory.stat -r--r--r-- 1 root root 0 Nov 11 01:44 misc.capacity drwxr-xr-x 2 root root 0 Nov 11 01:39 proc-fs-nfsd.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-fs-fuse-connections.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-config.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-debug.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-tracing.mount
drwxr-xr-x 40 root root 0 Nov 11 02:01 system.slice drwxr-xr-x 2 root root 0 Nov 11 01:39 user.slice
localhost:/tmp # mount | grep cgroup
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot) cpuset on /var/tmp/cpuset type cgroup (rw,relatime,cpuset)
Quoted 4 lines
Signature · 3 lines
-- Cyril Hrubis [email protected]
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Hi!
Quoted 35 lines
On sle-micro 6.1, you can mount v1 controller when it was already mounted under v2 And after you force mount v1 cpuset controller, the v2 cpuset controller will be removed
localhost:~ # mount | grep cgroup
cgroup2 on/sys/fs/cgrouptype cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot)localhost:~ # ll
/sys/fs/cgroup/
total 0(quoted diff) +0
-11-r--r--r-- 1 root root 0 Nov 11 01:39 cgroup.controllers -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.depth -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.descendants -rw-r--r-- 1 root root 0 Nov 11 01:39 cgroup.procs -r--r--r-- 1 root root 0 Nov 11 01:44 cgroup.stat -rw-r--r-- 1 root root 0 Nov 11 01:39 cgroup.subtree_control -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.threads -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat.local -r--r--r-- 1 root root 0 Nov 11 01:44 cpuset.cpus.effective <<<< -r--r--r-- 1 root root 0 Nov 11 01:44 cpuset.mems.effective <<<<drwxr-xr-x 2 root root 0 Nov 11 01:39 dev-hugepages.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 dev-mqueue.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 init.scope(quoted diff) +0
-3-rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.model -rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.qos -r--r--r-- 1 root root 0 Nov 11 01:44 io.statdrwxr-xr-x 2 root root 0 Nov 11 01:39 machine.slice
(quoted diff) +0
-4-r--r--r-- 1 root root 0 Nov 11 01:44 memory.numa_stat --w------- 1 root root 0 Nov 11 01:44 memory.reclaim -r--r--r-- 1 root root 0 Nov 11 01:44 memory.stat -r--r--r-- 1 root root 0 Nov 11 01:44 misc.capacitydrwxr-xr-x 2 root root 0 Nov 11 01:39 proc-fs-nfsd.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-fs-fuse-connections.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-config.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-debug.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-tracing.mount
Quoted 5 lines
drwxr-xr-x 40 root root 0 Nov 11 01:42 system.slice drwxr-xr-x 2 root root 0 Nov 11 01:39 user.slice
localhost:/tmp # mkdir
/var/tmp/cpuset
localhost:/tmp # mount -t cgroup -o cpuset cpuset/var/tmp/cpuset<<<<<<
You are supposed to get an error here, at least that is what I thought.
I do get error here on vanilla 6.10 but on debian 6.1 the mount succeeds as well. CCing Michal.
Michal I was under an impression that a controller that has been bound to v2 cannot be removed from there and bound to v1 anymore, but it seems that it may happen in some cases.
Quoted 56 lines
localhost:/tmp # ll
/var/tmp/cpuset/
total 0(quoted diff) +0
-20-rw-r--r-- 1 root root 0 Nov 11 01:53 cgroup.clone_children -rw-r--r-- 1 root root 0 Nov 11 01:53 cgroup.procs -r--r--r-- 1 root root 0 Nov 11 01:53 cgroup.sane_behavior -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.cpu_exclusive -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.cpus -r--r--r-- 1 root root 0 Nov 11 01:53 cpuset.effective_cpus -r--r--r-- 1 root root 0 Nov 11 01:53 cpuset.effective_mems -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.mem_exclusive -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.mem_hardwall -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_migrate -r--r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_pressure -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_pressure_enabled -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_spread_page -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.memory_spread_slab -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.mems -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.sched_load_balance <<<<<< -rw-r--r-- 1 root root 0 Nov 11 01:53 cpuset.sched_relax_domain_level -rw-r--r-- 1 root root 0 Nov 11 01:53 notify_on_release -rw-r--r-- 1 root root 0 Nov 11 01:53 release_agent -rw-r--r-- 1 root root 0 Nov 11 01:53 taskslocalhost:/tmp # ll
/sys/fs/cgroup/
total 0(quoted diff) +0
-9-r--r--r-- 1 root root 0 Nov 11 01:44 cgroup.controllers -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.depth -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.max.descendants -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.procs -r--r--r-- 1 root root 0 Nov 11 01:44 cgroup.stat -rw-r--r-- 1 root root 0 Nov 11 01:39 cgroup.subtree_control -rw-r--r-- 1 root root 0 Nov 11 01:44 cgroup.threads -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat -r--r--r-- 1 root root 0 Nov 11 01:44 cpu.stat.localdrwxr-xr-x 2 root root 0 Nov 11 01:39 dev-hugepages.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 dev-mqueue.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 init.scope(quoted diff) +0
-3-rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.model -rw-r--r-- 1 root root 0 Nov 11 01:44 io.cost.qos -r--r--r-- 1 root root 0 Nov 11 01:44 io.statdrwxr-xr-x 2 root root 0 Nov 11 01:39 machine.slice
(quoted diff) +0
-4-r--r--r-- 1 root root 0 Nov 11 01:44 memory.numa_stat --w------- 1 root root 0 Nov 11 01:44 memory.reclaim -r--r--r-- 1 root root 0 Nov 11 01:44 memory.stat -r--r--r-- 1 root root 0 Nov 11 01:44 misc.capacitydrwxr-xr-x 2 root root 0 Nov 11 01:39 proc-fs-nfsd.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-fs-fuse-connections.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-config.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-debug.mount drwxr-xr-x 2 root root 0 Nov 11 01:39 sys-kernel-tracing.mountdrwxr-xr-x 40 root root 0 Nov 11 02:01 system.slice drwxr-xr-x 2 root root 0 Nov 11 01:39 user.slice
localhost:/tmp # mount | grep cgroup
cgroup2 on/sys/fs/cgrouptype cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot) cpuset on/var/tmp/cpusettype cgroup (rw,relatime,cpuset)
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
A message that is not in the archive (sent off-list or not yet received): dnhjiv6iqwbref6kaq2amylqbwrksnph3l7ewxgqetp6crrz3s@3k5j5t4sy2gl
Hi!
Quoted 12 lines
Quoted 1 line
You are supposed to get an error here, at least that is what I thought.
That depends -- if the controller's tasks are all in its (only) root cgroup, it can be re-bind between hierarchies (v1 to v2 or vice versa).
Quoted 2 lines
I do get error here on vanilla 6.10 but on debian 6.1 the mount succeeds as well. CCing Michal.
If
/sys/fs/cgroup/cgroup.subtree_controlcontainscpuset, it's likely used by some of the services, hence not all tasks are in the root cgroup and re-binding fails. That's what can differ between systems.
Quoted 7 lines
Quoted 3 lines
Michal I was under an impression that a controller that has been bound to v2 cannot be removed from there and bound to v1 anymore, but it seems that it may happen in some cases.
It can happen under the condition above.
(And in a future kernel it may be truly unavailable in v1 with !CONFIG_CPUSETS_V1.)
Thanks for the clarifications.
I still do not think that re-binding controllers to v1 is a good idea though. Firstly v1 is being phased out and we will eventually get rid of it, so there is no point in investing too much effort into v1 testing in hybrid environments.
And secondly I fear that we may end up skipping v2 tests because of the rebinding. What I think may happen is that the cgroup cleanup is asynchronous which means that there still would be remnants of the v1 cpuset cgroup even after the particular v1 test would exit, which would cause next test a v2 test to be skipped, because the rebinding would fail.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Quoted 28 lines · Cyril Hrubis
Hi!
Quoted 12 lines
Quoted 1 line
You are supposed to get an error here, at least that is what I thought.
That depends -- if the controller's tasks are all in its (only) root cgroup, it can be re-bind between hierarchies (v1 to v2 or vice versa).
Quoted 2 lines
I do get error here on vanilla 6.10 but on debian 6.1 the mount succeeds as well. CCing Michal.
If
/sys/fs/cgroup/cgroup.subtree_controlcontainscpuset, it's likely used by some of the services, hence not all tasks are in the root cgroup and re-binding fails. That's what can differ between systems.Quoted 7 lines
Quoted 3 lines
Michal I was under an impression that a controller that has been bound to v2 cannot be removed from there and bound to v1 anymore, but it seems that it may happen in some cases.
It can happen under the condition above.
(And in a future kernel it may be truly unavailable in v1 with !CONFIG_CPUSETS_V1.)Thanks for the clarifications.
I still do not think that re-binding controllers to v1 is a good idea though. Firstly v1 is being phased out and we will eventually get rid of it, so there is no point in investing too much effort into v1 testing in hybrid environments.
Quoted 6 lines
And secondly I fear that we may end up skipping v2 tests because of the rebinding. What I think may happen is that the cgroup cleanup is asynchronous which means that there still would be remnants of the v1 cpuset cgroup even after the particular v1 test would exit, which would cause next test a v2 test to be skipped, because the rebinding would fail.
Thanks all for feedback, so we can skip this patch.
Quoted 4 lines
Signature · 3 lines
-- Cyril Hrubis [email protected]
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp