drm/xe/vf: Post-migration recovery of GGTT nodes and CTB
Subsystems (3)
v2 cover drm/xe/vf: Post-migration recovery of GGTT nodes and CTB
To support VF Migration, it is necessary to do fixups to any non-virtualized resources. These fixups need to be applied within VM, on the KMD working with VF.
This series adds two fixup functions to the recovery worker:
* for fixing drm_mm nodes which represent GGTT allocations
* for fixing content of outgoing CTB buffer
v2: Fixed missing include, made checkpatch happy
Tomasz Lis (3):
drm/drm_mm: Safe macro for iterating through nodes in range drm/xe/sriov: Shifting GGTT area post migration drm/xe/vf: Fixup CTB send buffer messages after migration
drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 177 ++++++++++++++++++++++ drivers/gpu/drm/xe/xe_gt_sriov_vf.h | 1 + drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h | 2 + drivers/gpu/drm/xe/xe_guc_ct.c | 146 ++++++++++++++++++ drivers/gpu/drm/xe/xe_guc_ct.h | 2 + drivers/gpu/drm/xe/xe_sriov_vf.c | 27 ++++ include/drm/drm_mm.h | 19 +++ 7 files changed, 374 insertions(+)
Signature · 1 line
2.25.1
PATCH v2 1/3 drm/drm_mm: Safe macro for iterating through nodes in range
Benefits of drm_mm_for_each_node_safe and drm_mm_for_each_node_in_range squished together into one macro.
--- include/drm/drm_mm.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
include/drm/drm_mm.h +19 -0
@@ -504,6 +504,25 @@ __drm_mm_interval_first(const struct drm_mm *mm, u64 start, u64 last); node__->start < (end__); \ node__ = list_next_entry(node__, node_list)) +/** +* drm_mm_for_each_node_in_range_safe - iterator to walk over a range of +* allocated nodes +* @node__: drm_mm_node structure to assign to in each iteration step +* @next__: &struct drm_mm_node to store the next step +* @mm__: drm_mm allocator to walk +* @start__: starting offset, the first node will overlap this +* @end__: ending offset, the last node will start before this (but may overlap) +* +* This iterator walks over all nodes in the range allocator that lie +* between @start and @end. It is implemented similarly to list_for_each_safe(), +* so safe against removal of elements. +*/ +#define drm_mm_for_each_node_in_range_safe (node__, next__, mm__, start__, end__) \ + for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1), \ + next__ = list_next_entry(node__, node_list); \ + node__->start < (end__); \ + node__ = next__, next__ = list_next_entry(next__, node_list)) + void drm_mm_scan_init_with_range(struct drm_mm_scan *scan, struct drm_mm *mm, u64 size, u64 alignment, unsigned long color,
Signature · 1 line
2.25.1
Re: [PATCH v2 1/3] drm/drm_mm: Safe macro for iterating through nodes in range
+ dri-devel
Quoted 38 lines · Tomasz Lis
Benefits of
drm_mm_for_each_node_safeanddrm_mm_for_each_node_in_rangesquished together into one macro.Signed-off-by Tomasz Lis <[email protected]>--- include/drm/drm_mm.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)include/drm/drm_mm.h +19
-0@@ -504,6 +504,25 @@ __drm_mm_interval_first(const struct drm_mm *mm, u64 start, u64 last); node__->start < (end__); \ node__ = list_next_entry(node__, node_list)) +/** +* drm_mm_for_each_node_in_range_safe - iterator to walk over a range of +* allocated nodes +* @node__: drm_mm_node structure to assign to in each iteration step +* @next__: &struct drm_mm_node to store the next step +* @mm__: drm_mm allocator to walk +* @start__: starting offset, the first node will overlap this +* @end__: ending offset, the last node will start before this (but may overlap) +* +* This iterator walks over all nodes in the range allocator that lie +* between @start and @end. It is implemented similarly to list_for_each_safe(), +* so safe against removal of elements. +*/ +#define drm_mm_for_each_node_in_range_safe (node__, next__, mm__, start__, end__) \ + for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1), \ + next__ = list_next_entry(node__, node_list); \ + node__->start < (end__); \ + node__ = next__, next__ = list_next_entry(next__, node_list)) + void drm_mm_scan_init_with_range(struct drm_mm_scan *scan, struct drm_mm *mm, u64 size, u64 alignment, unsigned long color,
PATCH v2 2/3 drm/xe/sriov: Shifting GGTT area post migration
In reply to Tomasz LisWe have only one GGTT for all IOV functions, with each VF having assigned a range of addresses for its use. After migration, a VF can receive a different range of addresses than it had initially.
This implements shifting GGTT addresses within drm_mm nodes, so that VMAs stay valid after migration. This will make the driver use new addresses when accessing GGTT from the moment the shifting ends.
By taking the ggtt->lock for the period of VMA fixups, this change also adds constaint on that mutex. Any locks used during the recovery cannot ever wait for hardware response - because after migration, the hardware will not do anything until fixups are finished.
--- drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 175 ++++++++++++++++++++++++++++ drivers/gpu/drm/xe/xe_gt_sriov_vf.h | 1 + drivers/gpu/drm/xe/xe_sriov_vf.c | 15 +++ 3 files changed, 191 insertions(+)
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +175 -0
@@ -912,6 +912,181 @@ int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt)return err; } +static u64 drm_mm_node_end (struct drm_mm_node *node) +{ +return node->start + node->size; +} + +static s64 vf_get_post_migration_ggtt_shift (struct xe_gt *gt) +{ +struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config; +struct xe_tile *tile =gt_to_tile (gt); +u64 old_base; +s64 ggtt_shift; + + old_base =drm_mm_node_end (&tile->sriov.vf.ggtt_balloon[0 ]->base); + ggtt_shift = config->ggtt_base - (s64 )old_base; + +xe_gt_sriov_info (gt,"GGTT base shifted from %#llx to %#llx\n" , + old_base, old_base + ggtt_shift); + +return ggtt_shift; +} + +static void xe_ggtt_mm_shift_nodes (struct xe_ggtt *ggtt,struct drm_mm_node *balloon_beg, +struct drm_mm_node *balloon_fin,s64 shift) +{ +struct drm_mm_node *node, *tmpn; +int err; +LIST_HEAD (temp_list_head); + +lockdep_assert_held (&ggtt->lock); + +/* +* Move nodes, from range previously assigned to this VF, into temp list. +* +* The balloon_beg and balloon_fin nodes are there to eliminate unavailable +* ranges from use: first reserves the GGTT area below the range for current VF, +* and second reserves area above. There may also exist extra nodes at the bottom +* or top of GGTT range, as long as there are no free spaces inbetween. Such +* extra nodes will be left unchanged. +* +* Below is a GGTT layout of example VF, with a certain address range assigned to +* said VF, and inaccessible areas above and below: +* +* 0 ggtt->size +* |<--------------------------- Total GGTT size ----------------------------->| +* +* +-----------+-------------------------+----------+--------------+-----------+ +* |\\\\\\\\\\\|/////////////////////////| VF mem |//////////////|\\\\\\\\\\\| +* +-----------+-------------------------+----------+--------------+-----------+ +* +* Hardware enforced access rules before migration: +* +* |<------- inaccessible for VF ------->|<VF owned>|<-- inaccessible for VF ->| +* +* drm_mm nodes used for tracking allocations: +* +* |<- extra ->|<------- balloon ------->|<- nodes->|<-- balloon ->|<- extra ->| +* +* After the migration, GGTT area assigned to the VF might have shifted, either +* to lower or to higher address. But we expect the total size and extra areas to +* be identical, as migration can only happen between matching platforms. +* Below is an example of GGTT layout of the VF after migration. Content of the +* GGTT for VF has been moved to a new area, and we receive its address from GuC: +* +* +-----------+--------------+----------+-------------------------+-----------+ +* |\\\\\\\\\\\|//////////////| VF mem |/////////////////////////|\\\\\\\\\\\| +* +-----------+--------------+----------+-------------------------+-----------+ +* +* Hardware enforced access rules after migration: +* +* |<- inaccessible for VF -->|<VF owned>|<------- inaccessible for VF ------->| +* +* So the VF has a new slice of GGTT assigned, and during migration process, the +* memory content was copied to that new area. But the drm_mm nodes within i915 +* are still tracking allocations using the old addresses. The nodes within VF +* owned area have to be shifted, and balloon nodes need to be resized to +* properly mask out areas not owned by the VF. +* +* Fixed drm_mm nodes used for tracking allocations: +* +* |<- extra ->|<- balloon ->|<-- VF -->|<-------- balloon ------>|<- extra ->| +* +* Due to use of GPU profiles, we do not expect the old and new GGTT ares to +* overlap; but our node shifting will fix addresses properly regardless. +* +*/ +drm_mm_for_each_node_in_range_safe (node, tmpn, &ggtt->mm, +drm_mm_node_end (balloon_beg), + balloon_fin->start) { +drm_mm_remove_node (node); +list_add (&node->node_list, &temp_list_head); + } + +/* shift and re-add ballooning nodes */ +if (drm_mm_node_allocated (balloon_beg)) +drm_mm_remove_node (balloon_beg); +if (drm_mm_node_allocated (balloon_fin)) +drm_mm_remove_node (balloon_fin); + balloon_beg->size += shift; + balloon_fin->start += shift; + balloon_fin->size -= shift; +if (balloon_beg->size !=0 ) { + err =drm_mm_reserve_node (&ggtt->mm, balloon_beg); +XE_WARN_ON (err); + } +if (balloon_fin->size !=0 ) { + err =drm_mm_reserve_node (&ggtt->mm, balloon_fin); +XE_WARN_ON (err); + } + +/* +* Now the GGTT VM contains only nodes outside of area assigned to this VF. +* We can re-add all VF nodes with shifted offsets. +*/ +list_for_each_entry_safe (node, tmpn, &temp_list_head, node_list) { +list_del (&node->node_list); + node->start += shift; + err =drm_mm_reserve_node (&ggtt->mm, node); +XE_WARN_ON (err); + } +} + +static void xe_ggtt_node_shift_nodes (struct xe_ggtt *ggtt,struct xe_ggtt_node *balloon_beg, +struct xe_ggtt_node *balloon_fin,s64 shift) +{ +struct drm_mm_node *balloon_mm_beg, *balloon_mm_end; +struct drm_mm_node loc_beg, loc_end; + +if (balloon_beg && balloon_beg->ggtt) + balloon_mm_beg = &balloon_beg->base; +else { + loc_beg.color =0 ; + loc_beg.flags =0 ; + loc_beg.start =xe_wopcm_size (ggtt->tile->xe); + loc_beg.size =0 ; + balloon_mm_beg = &loc_beg; + } + +if (balloon_fin && balloon_fin->ggtt) + balloon_mm_end = &balloon_fin->base; +else { + loc_end.color =0 ; + loc_end.flags =0 ; + loc_end.start =GUC_GGTT_TOP ; + loc_end.size =0 ; + balloon_mm_end = &loc_end; + } + +drm_dbg (&ggtt->tile->xe->drm,"tli: node shift start beg %llx %llx end %llx %llx\n" , + balloon_mm_beg->start, balloon_mm_beg->size, + balloon_mm_end->start, balloon_mm_end->size); +xe_ggtt_mm_shift_nodes (ggtt, balloon_mm_beg, balloon_mm_end, shift); +drm_dbg (&ggtt->tile->xe->drm,"tli: node shift end\n" ); +} + +/** +* xe_gt_sriov_vf_fixup_ggtt_nodes - Shift GGTT allocations to match assigned range. +* @gt: the &xe_gt struct instance +* +* Since Global GTT is not virtualized, each VF has an assigned range +* within the global space. This range might have changed during migration, +* which requires all memory addresses pointing to GGTT to be shifted. +*/ +void xe_gt_sriov_vf_fixup_ggtt_nodes (struct xe_gt *gt) +{ +struct xe_tile *tile =gt_to_tile (gt); +struct xe_ggtt *ggtt = tile->mem.ggtt; +s64 ggtt_shift; + +mutex_lock (&ggtt->lock); + ggtt_shift =vf_get_post_migration_ggtt_shift (gt); +xe_ggtt_node_shift_nodes (ggtt, tile->sriov.vf.ggtt_balloon[0 ], + tile->sriov.vf.ggtt_balloon[1 ], ggtt_shift); +mutex_unlock (&ggtt->lock); +} +static int vf_runtime_reg_cmp (const void *a,const void *b) {const struct vf_runtime_reg *ra = a;
drivers/gpu/drm/xe/xe_gt_sriov_vf.h +1 -0
@@ -17,6 +17,7 @@ int xe_gt_sriov_vf_query_config(struct xe_gt *gt);int xe_gt_sriov_vf_connect (struct xe_gt *gt);int xe_gt_sriov_vf_query_runtime (struct xe_gt *gt);int xe_gt_sriov_vf_prepare_ggtt (struct xe_gt *gt); +void xe_gt_sriov_vf_fixup_ggtt_nodes (struct xe_gt *gt);int xe_gt_sriov_vf_notify_resfix_done (struct xe_gt *gt);void xe_gt_sriov_vf_migrated_event_handler (struct xe_gt *gt);
drivers/gpu/drm/xe/xe_sriov_vf.c +15 -0
@@ -7,6 +7,7 @@#include "xe_assert.h" #include "xe_device.h" +#include "xe_gt.h" #include "xe_gt_sriov_printk.h" #include "xe_gt_sriov_vf.h" #include "xe_pm.h"
@@ -170,6 +171,19 @@ static bool vf_post_migration_imminent(struct xe_device *xe)work_pending (&xe->sriov.vf.migration.worker); } +static void vf_post_migration_fixup_ggtt_nodes (struct xe_device *xe) +{ +struct xe_gt *gt; +unsigned int id; + +for_each_gt (gt, xe, id) { +/* media doesn't have its own ggtt */ +if (xe_gt_is_media_type (gt)) +continue ; +xe_gt_sriov_vf_fixup_ggtt_nodes (gt); + } +} +/* * Notify all GuCs about resource fixups apply finished. */
@@ -201,6 +215,7 @@ static void vf_post_migration_recovery(struct xe_device *xe)if (unlikely (err)) goto fail; +vf_post_migration_fixup_ggtt_nodes (xe);/* FIXME: add the recovery steps */ vf_post_migration_notify_resfix_done (xe);xe_pm_runtime_put (xe);
Signature · 1 line
2.25.1
Re: [PATCH v2 2/3] drm/xe/sriov: Shifting GGTT area post migration
Quoted 26 lines · Tomasz Lis
We have only one GGTT for all IOV functions, with each VF having assigned a range of addresses for its use. After migration, a VF can receive a different range of addresses than it had initially.
This implements shifting GGTT addresses within
drm_mmnodes, so that VMAs stay valid after migration. This will make the driver use new addresses when accessing GGTT from the moment the shifting ends.By taking the
ggtt->lockfor the period of VMA fixups, this change also adds constaint on that mutex. Any locks used during the recovery cannot ever wait for hardware response - because after migration, the hardware will not do anything until fixups are finished.Signed-off-by Tomasz Lis <[email protected]>--- drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 175 ++++++++++++++++++++++++++++ drivers/gpu/drm/xe/xe_gt_sriov_vf.h | 1 + drivers/gpu/drm/xe/xe_sriov_vf.c | 15 +++ 3 files changed, 191 insertions(+)drivers/gpu/drm/xe/xe_gt_sriov_vf.c +0
-0@@ -912,6 +912,181 @@ int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt)return err;
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 922
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +8
-0} +static u64 drm_mm_node_end (struct drm_mm_node *node) +{ +return node->start + node->size; +} + +static s64 vf_get_post_migration_ggtt_shift (struct xe_gt *gt) +{ +struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config;
I'm wondering whether it would be possible to set/remember any GGTT shift when VF was querying it's new config?
Quoted 5 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +5
-0+struct xe_tile *tile =gt_to_tile (gt); +u64 old_base; +s64 ggtt_shift; + + old_base =drm_mm_node_end (&tile->sriov.vf.ggtt_balloon[0 ]->base);
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 937
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+ ggtt_shift = config->ggtt_base - (s64 )old_base; + +xe_gt_sriov_info (gt,"GGTT base shifted from %#llx to %#llx\n" , + old_base, old_base + ggtt_shift); + +return ggtt_shift; +} + +static void xe_ggtt_mm_shift_nodes (struct xe_ggtt *ggtt,struct drm_mm_node *balloon_beg, +struct drm_mm_node *balloon_fin,s64 shift)
there is way too much internals that should be just known to the xe_ggtt maybe better to move most of this function to xe_ggtt.c ?
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 941
Quoted 4 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +4
-0+{ +struct drm_mm_node *node, *tmpn; +int err; +LIST_HEAD (temp_list_head);
nit: I think our Xe maintainers prefer declarations in Reverse Christmas Tree Format
Quoted 19 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +19
-0+ +lockdep_assert_held (&ggtt->lock); + +/* +* Move nodes, from range previously assigned to this VF, into temp list. +* +* The balloon_beg and balloon_fin nodes are there to eliminate unavailable +* ranges from use: first reserves the GGTT area below the range for current VF, +* and second reserves area above. There may also exist extra nodes at the bottom +* or top of GGTT range, as long as there are no free spaces inbetween. Such +* extra nodes will be left unchanged. +* +* Below is a GGTT layout of example VF, with a certain address range assigned to +* said VF, and inaccessible areas above and below: +* +* 0 ggtt->size +* |<--------------------------- Total GGTT size ----------------------------->| +* +* +-----------+-------------------------+----------+--------------+-----------+
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 970
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+* |\\\\\\\\\\\|/////////////////////////| VF mem |//////////////|\\\\\\\\\\\| +* +-----------+-------------------------+----------+--------------+-----------+ +* +* Hardware enforced access rules before migration: +* +* |<------- inaccessible for VF ------->|<VF owned>|<-- inaccessible for VF ->| +* +* drm_mm nodes used for tracking allocations: +* +* |<- extra ->|<------- balloon ------->|<- nodes->|<-- balloon ->|<- extra ->|
in Xe we don't have 'extra' regions since xe_ggtt already covers only GuC accessible GGTT region, so it's like:
0 4GiB
|<----------------- Total GGTT size ------------------------>|
WOPCM GUC_TOP
+-------+-------------------+-----------+------------+-------+ |\\\\\\\|///////////////////| VF mem |////////////|\\\\\\\| +-------+-------------------+-----------+------------+-------+
0 ggtt->size
|<--balloon-------->|<--nodes-->|<-balloon->|Quoted 7 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +7
-0+* +* After the migration, GGTT area assigned to the VF might have shifted, either +* to lower or to higher address. But we expect the total size and extra areas to +* be identical, as migration can only happen between matching platforms. +* Below is an example of GGTT layout of the VF after migration. Content of the +* GGTT for VF has been moved to a new area, and we receive its address from GuC: +*
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 987
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+* +-----------+--------------+----------+-------------------------+-----------+ +* |\\\\\\\\\\\|//////////////| VF mem |/////////////////////////|\\\\\\\\\\\| +* +-----------+--------------+----------+-------------------------+-----------+ +* +* Hardware enforced access rules after migration: +* +* |<- inaccessible for VF -->|<VF owned>|<------- inaccessible for VF ------->| +* +* So the VF has a new slice of GGTT assigned, and during migration process, the +* memory content was copied to that new area. But the drm_mm nodes within i915
i915 ?
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 992
Quoted 5 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +5
-0+* are still tracking allocations using the old addresses. The nodes within VF +* owned area have to be shifted, and balloon nodes need to be resized to +* properly mask out areas not owned by the VF. +* +* Fixed drm_mm nodes used for tracking allocations:
drm_mm nodes are implementation details of the xe_ggtt_nodes
Quoted 19 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +19
-0+* +* |<- extra ->|<- balloon ->|<-- VF -->|<-------- balloon ------>|<- extra ->| +* +* Due to use of GPU profiles, we do not expect the old and new GGTT ares to +* overlap; but our node shifting will fix addresses properly regardless. +* +*/ +drm_mm_for_each_node_in_range_safe (node, tmpn, &ggtt->mm, +drm_mm_node_end (balloon_beg), + balloon_fin->start) { +drm_mm_remove_node (node); +list_add (&node->node_list, &temp_list_head); + } + +/* shift and re-add ballooning nodes */ +if (drm_mm_node_allocated (balloon_beg)) +drm_mm_remove_node (balloon_beg); +if (drm_mm_node_allocated (balloon_fin)) +drm_mm_remove_node (balloon_fin);
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1021
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+ balloon_beg->size += shift; + balloon_fin->start += shift; + balloon_fin->size -= shift; +if (balloon_beg->size !=0 ) { + err =drm_mm_reserve_node (&ggtt->mm, balloon_beg); +XE_WARN_ON (err); + } +if (balloon_fin->size !=0 ) { + err =drm_mm_reserve_node (&ggtt->mm, balloon_fin); +XE_WARN_ON (err);
maybe xe_tile_assert() will work here?
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1032
Quoted 11 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +11
-0+ } + +/* +* Now the GGTT VM contains only nodes outside of area assigned to this VF. +* We can re-add all VF nodes with shifted offsets. +*/ +list_for_each_entry_safe (node, tmpn, &temp_list_head, node_list) { +list_del (&node->node_list); + node->start += shift; + err =drm_mm_reserve_node (&ggtt->mm, node); +XE_WARN_ON (err);
ditto
Quoted 24 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +24
-0+ } +} + +static void xe_ggtt_node_shift_nodes (struct xe_ggtt *ggtt,struct xe_ggtt_node *balloon_beg, +struct xe_ggtt_node *balloon_fin,s64 shift) +{ +struct drm_mm_node *balloon_mm_beg, *balloon_mm_end; +struct drm_mm_node loc_beg, loc_end; + +if (balloon_beg && balloon_beg->ggtt) + balloon_mm_beg = &balloon_beg->base; +else { + loc_beg.color =0 ; + loc_beg.flags =0 ; + loc_beg.start =xe_wopcm_size (ggtt->tile->xe); + loc_beg.size =0 ; + balloon_mm_beg = &loc_beg; + } + +if (balloon_fin && balloon_fin->ggtt) + balloon_mm_end = &balloon_fin->base; +else { + loc_end.color =0 ; + loc_end.flags =0 ;
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1066
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+ loc_end.start =GUC_GGTT_TOP ; + loc_end.size =0 ; + balloon_mm_end = &loc_end; + } + +drm_dbg (&ggtt->tile->xe->drm,"tli: node shift start beg %llx %llx end %llx %llx\n" , + balloon_mm_beg->start, balloon_mm_beg->size, + balloon_mm_end->start, balloon_mm_end->size); +xe_ggtt_mm_shift_nodes (ggtt, balloon_mm_beg, balloon_mm_end, shift); +drm_dbg (&ggtt->tile->xe->drm,"tli: node shift end\n" );
tli ? looks like your private debug logs
Quoted 8 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +8
-0+} + +/** +* xe_gt_sriov_vf_fixup_ggtt_nodes - Shift GGTT allocations to match assigned range. +* @gt: the &xe_gt struct instance +* +* Since Global GTT is not virtualized, each VF has an assigned range +* within the global space. This range might have changed during migration,
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1084
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+* which requires all memory addresses pointing to GGTT to be shifted. +*/ +void xe_gt_sriov_vf_fixup_ggtt_nodes (struct xe_gt *gt) +{ +struct xe_tile *tile =gt_to_tile (gt); +struct xe_ggtt *ggtt = tile->mem.ggtt; +s64 ggtt_shift; + +mutex_lock (&ggtt->lock); + ggtt_shift =vf_get_post_migration_ggtt_shift (gt);
do we still need to do anything if shift is 0?
Quoted 33 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +5
-0+xe_ggtt_node_shift_nodes (ggtt, tile->sriov.vf.ggtt_balloon[0 ], + tile->sriov.vf.ggtt_balloon[1 ], ggtt_shift); +mutex_unlock (&ggtt->lock); +} +static int vf_runtime_reg_cmp (const void *a,const void *b) {const struct vf_runtime_reg *ra = a;drivers/gpu/drm/xe/xe_gt_sriov_vf.h +1
-0@@ -17,6 +17,7 @@ int xe_gt_sriov_vf_query_config(struct xe_gt *gt);int xe_gt_sriov_vf_connect (struct xe_gt *gt);int xe_gt_sriov_vf_query_runtime (struct xe_gt *gt);int xe_gt_sriov_vf_prepare_ggtt (struct xe_gt *gt); +void xe_gt_sriov_vf_fixup_ggtt_nodes (struct xe_gt *gt);int xe_gt_sriov_vf_notify_resfix_done (struct xe_gt *gt);void xe_gt_sriov_vf_migrated_event_handler (struct xe_gt *gt);drivers/gpu/drm/xe/xe_sriov_vf.c +1
-0@@ -7,6 +7,7 @@#include "xe_assert.h" #include "xe_device.h" +#include "xe_gt.h" #include "xe_gt_sriov_printk.h" #include "xe_gt_sriov_vf.h" #include "xe_pm.h"
drivers/gpu/drm/xe/xe_sriov_vf.c static bool vf_post_migration_imminent(struct xe_device *xe) · line 179
Quoted 9 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +6
-0@@ -170,6 +171,19 @@ static bool vf_post_migration_imminent(struct xe_device *xe)work_pending (&xe->sriov.vf.migration.worker); } +static void vf_post_migration_fixup_ggtt_nodes (struct xe_device *xe) +{ +struct xe_gt *gt; +unsigned int id; + +for_each_gt (gt, xe, id) {
maybe for_each_tile() would be a better fit here?
Quoted 18 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +8
-0+/* media doesn't have its own ggtt */ +if (xe_gt_is_media_type (gt)) +continue ; +xe_gt_sriov_vf_fixup_ggtt_nodes (gt); + } +} +/* * Notify all GuCs about resource fixups apply finished. */ @@ -201,6 +215,7 @@ static void vf_post_migration_recovery(struct xe_device *xe)if (unlikely (err)) goto fail; +vf_post_migration_fixup_ggtt_nodes (xe);/* FIXME: add the recovery steps */ vf_post_migration_notify_resfix_done (xe);xe_pm_runtime_put (xe);
Re: [PATCH v2 2/3] drm/xe/sriov: Shifting GGTT area post migration
Quoted 29 lines · Michal Wajdeczko
Quoted 28 lines · Tomasz Lis
We have only one GGTT for all IOV functions, with each VF having assigned a range of addresses for its use. After migration, a VF can receive a different range of addresses than it had initially.
This implements shifting GGTT addresses within
drm_mmnodes, so that VMAs stay valid after migration. This will make the driver use new addresses when accessing GGTT from the moment the shifting ends.By taking the
ggtt->lockfor the period of VMA fixups, this change also adds constaint on that mutex. Any locks used during the recovery cannot ever wait for hardware response - because after migration, the hardware will not do anything until fixups are finished.Signed-off-by Tomasz Lis<[email protected]>--- drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 175 ++++++++++++++++++++++++++++ drivers/gpu/drm/xe/xe_gt_sriov_vf.h | 1 + drivers/gpu/drm/xe/xe_sriov_vf.c | 15 +++ 3 files changed, 191 insertions(+)drivers/gpu/drm/xe/xe_gt_sriov_vf.c +0
-0@@ -912,6 +912,181 @@ int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt)return err; }
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 922
Quoted 8 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +8
-0+static u64 drm_mm_node_end (struct drm_mm_node *node) +{ +return node->start + node->size; +} + +static s64 vf_get_post_migration_ggtt_shift (struct xe_gt *gt) +{ +struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config;I'm wondering whether it would be possible to set/remember any GGTT shift when VF was querying it's new config?
The querying happens within post-migration recovery worker, after the upcoming lock is taken.
So subtracting old from new just after the GuC config query would be doable.
Yeah, will do that.
Quoted 9 lines
Quoted 9 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +9
-0+struct xe_tile *tile =gt_to_tile (gt); +u64 old_base; +s64 ggtt_shift; + + old_base =drm_mm_node_end (&tile->sriov.vf.ggtt_balloon[0 ]->base); + ggtt_shift = config->ggtt_base - (s64 )old_base; + +xe_gt_sriov_info (gt,"GGTT base shifted from %#llx to %#llx\n" , + old_base, old_base + ggtt_shift);
Quoted 8 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 937
Quoted 6 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +6
-0+ +return ggtt_shift; +} + +static void xe_ggtt_mm_shift_nodes (struct xe_ggtt *ggtt,struct drm_mm_node *balloon_beg, +struct drm_mm_node *balloon_fin,s64 shift)there is way too much internals that should be just known to the
xe_ggttmaybe better to move most of this function toxe_ggtt.c?
Sure, I can move them. Will do.
Quoted 6 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 941
Quoted 4 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +4
-0+{ +struct drm_mm_node *node, *tmpn; +int err; +LIST_HEAD (temp_list_head);nit: I think our Xe maintainers prefer declarations in Reverse Christmas Tree Format
I though the rule is - uninitialized, then initialized. But I see all possible conventions within the existing sources, so there just seem to be no rule.
Quoted 35 lines
Quoted 19 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +19
-0+ +lockdep_assert_held (&ggtt->lock); + +/* +* Move nodes, from range previously assigned to this VF, into temp list. +* +* The balloon_beg and balloon_fin nodes are there to eliminate unavailable +* ranges from use: first reserves the GGTT area below the range for current VF, +* and second reserves area above. There may also exist extra nodes at the bottom +* or top of GGTT range, as long as there are no free spaces inbetween. Such +* extra nodes will be left unchanged. +* +* Below is a GGTT layout of example VF, with a certain address range assigned to +* said VF, and inaccessible areas above and below: +* +* 0 ggtt->size +* |<--------------------------- Total GGTT size ----------------------------->| +* +* +-----------+-------------------------+----------+--------------+-----------+ drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 970
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+* |\\\\\\\\\\\|/////////////////////////| VF mem |//////////////|\\\\\\\\\\\| +* +-----------+-------------------------+----------+--------------+-----------+ +* +* Hardware enforced access rules before migration: +* +* |<------- inaccessible for VF ------->|<VF owned>|<-- inaccessible for VF ->| +* +* drm_mm nodes used for tracking allocations: +* +* |<- extra ->|<------- balloon ------->|<- nodes->|<-- balloon ->|<- extra ->| in Xe we don't have 'extra' regions since
xe_ggttalready covers only GuC accessible GGTT region, so it's like:0 4GiB
|<----------------- Total GGTT size ------------------------>|
Quoted 7 lines
WOPCM
GUC_TOP+-------+-------------------+-----------+------------+-------+ |\\\\\\\|///////////////////| VF mem |////////////|\\\\\\\| +-------+-------------------+-----------+------------+-------+0 ggtt->size |<--balloon-------->|<--nodes-->|<-balloon->|
will update.
Quoted 10 lines
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +10
-0+* +* After the migration, GGTT area assigned to the VF might have shifted, either +* to lower or to higher address. But we expect the total size and extra areas to +* be identical, as migration can only happen between matching platforms. +* Below is an example of GGTT layout of the VF after migration. Content of the +* GGTT for VF has been moved to a new area, and we receive its address from GuC: +* +* +-----------+--------------+----------+-------------------------+-----------+ +* |\\\\\\\\\\\|//////////////| VF mem |/////////////////////////|\\\\\\\\\\\| +* +-----------+--------------+----------+-------------------------+-----------+
Quoted 8 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 987
Quoted 7 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +7
-0+* +* Hardware enforced access rules after migration: +* +* |<- inaccessible for VF -->|<VF owned>|<------- inaccessible for VF ------->| +* +* So the VF has a new slice of GGTT assigned, and during migration process, the +* memory content was copied to that new area. But the drm_mm nodes within i915 i915 ?
ack
Quoted 6 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 992
Quoted 5 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +5
-0+* are still tracking allocations using the old addresses. The nodes within VF +* owned area have to be shifted, and balloon nodes need to be resized to +* properly mask out areas not owned by the VF. +* +* Fixed drm_mm nodes used for tracking allocations:
drm_mmnodes are implementation details of thexe_ggtt_nodes
You could equally say xe_ggtt_nodes are wrappers for drm_mm nodes. Neither of these is going anywhere
for the lifetime of the driver within the kernel. And even calling these approaches equal is a stretch.
It is easier to explain how something works using generic terms, and I'm sure you agree drm_mm nodes are
more generic than the xe-specific wrappers.
The function is not fixing anything beyond the drm_mm - there are no modifications to the xe decorator.
And note, vast majority of people reading the code will see the xe nodes as just that - drm_mm node decorators.
Quoted 22 lines
Quoted 22 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +22
-0+* +* |<- extra ->|<- balloon ->|<-- VF -->|<-------- balloon ------>|<- extra ->| +* +* Due to use of GPU profiles, we do not expect the old and new GGTT ares to +* overlap; but our node shifting will fix addresses properly regardless. +* +*/ +drm_mm_for_each_node_in_range_safe (node, tmpn, &ggtt->mm, +drm_mm_node_end (balloon_beg), + balloon_fin->start) { +drm_mm_remove_node (node); +list_add (&node->node_list, &temp_list_head); + } + +/* shift and re-add ballooning nodes */ +if (drm_mm_node_allocated (balloon_beg)) +drm_mm_remove_node (balloon_beg); +if (drm_mm_node_allocated (balloon_fin)) +drm_mm_remove_node (balloon_fin); + balloon_beg->size += shift; + balloon_fin->start += shift; + balloon_fin->size -= shift;
Quoted 8 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1021
Quoted 7 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +7
-0+if (balloon_beg->size !=0 ) { + err =drm_mm_reserve_node (&ggtt->mm, balloon_beg); +XE_WARN_ON (err); + } +if (balloon_fin->size !=0 ) { + err =drm_mm_reserve_node (&ggtt->mm, balloon_fin); +XE_WARN_ON (err);maybe
xe_tile_assert()will work here?
sound good.
Quoted 40 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1032
Quoted 11 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +11
-0+ } + +/* +* Now the GGTT VM contains only nodes outside of area assigned to this VF. +* We can re-add all VF nodes with shifted offsets. +*/ +list_for_each_entry_safe (node, tmpn, &temp_list_head, node_list) { +list_del (&node->node_list); + node->start += shift; + err =drm_mm_reserve_node (&ggtt->mm, node); +XE_WARN_ON (err);ditto
Quoted 27 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +27
-0+ } +} + +static void xe_ggtt_node_shift_nodes (struct xe_ggtt *ggtt,struct xe_ggtt_node *balloon_beg, +struct xe_ggtt_node *balloon_fin,s64 shift) +{ +struct drm_mm_node *balloon_mm_beg, *balloon_mm_end; +struct drm_mm_node loc_beg, loc_end; + +if (balloon_beg && balloon_beg->ggtt) + balloon_mm_beg = &balloon_beg->base; +else { + loc_beg.color =0 ; + loc_beg.flags =0 ; + loc_beg.start =xe_wopcm_size (ggtt->tile->xe); + loc_beg.size =0 ; + balloon_mm_beg = &loc_beg; + } + +if (balloon_fin && balloon_fin->ggtt) + balloon_mm_end = &balloon_fin->base; +else { + loc_end.color =0 ; + loc_end.flags =0 ; + loc_end.start =GUC_GGTT_TOP ; + loc_end.size =0 ; + balloon_mm_end = &loc_end;
Quoted 8 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1066
Quoted 7 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +7
-0+ } + +drm_dbg (&ggtt->tile->xe->drm,"tli: node shift start beg %llx %llx end %llx %llx\n" , + balloon_mm_beg->start, balloon_mm_beg->size, + balloon_mm_end->start, balloon_mm_end->size); +xe_ggtt_mm_shift_nodes (ggtt, balloon_mm_beg, balloon_mm_end, shift); +drm_dbg (&ggtt->tile->xe->drm,"tli: node shift end\n" );tli ? looks like your private debug logs
yeah, forgot about these.
Quoted 11 lines
Quoted 11 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +11
-0+} + +/** +* xe_gt_sriov_vf_fixup_ggtt_nodes - Shift GGTT allocations to match assigned range. +* @gt: the &xe_gt struct instance +* +* Since Global GTT is not virtualized, each VF has an assigned range +* within the global space. This range might have changed during migration, +* which requires all memory addresses pointing to GGTT to be shifted. +*/ +void xe_gt_sriov_vf_fixup_ggtt_nodes (struct xe_gt *gt)
Quoted 8 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt) · line 1084
Quoted 7 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +7
-0+{ +struct xe_tile *tile =gt_to_tile (gt); +struct xe_ggtt *ggtt = tile->mem.ggtt; +s64 ggtt_shift; + +mutex_lock (&ggtt->lock); + ggtt_shift =vf_get_post_migration_ggtt_shift (gt);do we still need to do anything if shift is 0?
Decreasing recovery time when possible does make sense. Will add a condition.
Quoted 36 lines
Quoted 36 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +5
-0+xe_ggtt_node_shift_nodes (ggtt, tile->sriov.vf.ggtt_balloon[0 ], + tile->sriov.vf.ggtt_balloon[1 ], ggtt_shift); +mutex_unlock (&ggtt->lock); +} +static int vf_runtime_reg_cmp (const void *a,const void *b) {const struct vf_runtime_reg *ra = a;drivers/gpu/drm/xe/xe_gt_sriov_vf.h +1
-0@@ -17,6 +17,7 @@ int xe_gt_sriov_vf_query_config(struct xe_gt *gt);int xe_gt_sriov_vf_connect (struct xe_gt *gt);int xe_gt_sriov_vf_query_runtime (struct xe_gt *gt);int xe_gt_sriov_vf_prepare_ggtt (struct xe_gt *gt); +void xe_gt_sriov_vf_fixup_ggtt_nodes (struct xe_gt *gt);int xe_gt_sriov_vf_notify_resfix_done (struct xe_gt *gt);void xe_gt_sriov_vf_migrated_event_handler (struct xe_gt *gt);drivers/gpu/drm/xe/xe_sriov_vf.c +1
-0@@ -7,6 +7,7 @@#include "xe_assert.h" #include "xe_device.h" +#include "xe_gt.h" #include "xe_gt_sriov_printk.h" #include "xe_gt_sriov_vf.h" #include "xe_pm.h" @@ -170,6 +171,19 @@ static bool vf_post_migration_imminent(struct xe_device *xe)work_pending (&xe->sriov.vf.migration.worker); }
Quoted 7 lines
drivers/gpu/drm/xe/xe_sriov_vf.c static bool vf_post_migration_imminent(struct xe_device *xe) · line 179
Quoted 6 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +6
-0+static void vf_post_migration_fixup_ggtt_nodes (struct xe_device *xe) +{ +struct xe_gt *gt; +unsigned int id; + +for_each_gt (gt, xe, id) {maybe
for_each_tile()would be a better fit here?
Since current platforms have ggtt per-tile rather than per-gt, it does makes sense. Will change.
-Tomasz
Quoted 18 lines
Quoted 18 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +8
-0+/* media doesn't have its own ggtt */ +if (xe_gt_is_media_type (gt)) +continue ; +xe_gt_sriov_vf_fixup_ggtt_nodes (gt); + } +} +/* * Notify all GuCs about resource fixups apply finished. */ @@ -201,6 +215,7 @@ static void vf_post_migration_recovery(struct xe_device *xe)if (unlikely (err)) goto fail; +vf_post_migration_fixup_ggtt_nodes (xe);/* FIXME: add the recovery steps */ vf_post_migration_notify_resfix_done (xe);xe_pm_runtime_put (xe);
PATCH v2 3/3 drm/xe/vf: Fixup CTB send buffer messages after migration
In reply to Tomasz LisDuring post-migration recovery of a VF, it in necessary to update GGTT references included in messages which are going to be sent to GuC. GuC will start consuming messages after VF KMD will inform it about fixups being done; before that, the VF KMD is expected to update any H2G messages which are already in send buffer but were not consumed by GuC.
Only a small subset of messages allowed for VFs have GGTT references in them. This patch adds the functionality to parse the CTB send ring buffer and shift addresses contained within.
While fixing the CTB content, ct->lock is not taken. This means the only barier taken remains GGTT address lock - which is ok, because only requests with GGTT addresses matter, but it also means tail changes can happen during the CTB fixups execution (which may be ignored as any new messages will not have anything to fix).
The GGTT address locking will be introduced in a future series.
--- drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 2 + drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h | 2 + drivers/gpu/drm/xe/xe_guc_ct.c | 146 ++++++++++++++++++++++ drivers/gpu/drm/xe/xe_guc_ct.h | 2 + drivers/gpu/drm/xe/xe_sriov_vf.c | 12 ++ 5 files changed, 164 insertions(+)
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +2 -0
@@ -920,12 +920,14 @@ static u64 drm_mm_node_end(struct drm_mm_node *node)static s64 vf_get_post_migration_ggtt_shift (struct xe_gt *gt) {struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config; +struct xe_gt_sriov_vf_runtime *runtime = >->sriov.vf.runtime;struct xe_tile *tile =gt_to_tile (gt);u64 old_base;s64 ggtt_shift; old_base =drm_mm_node_end (&tile->sriov.vf.ggtt_balloon[0 ]->base); ggtt_shift = config->ggtt_base - (s64 )old_base; + runtime->ggtt_shift = ggtt_shift;xe_gt_sriov_info (gt,"GGTT base shifted from %#llx to %#llx\n" , old_base, old_base + ggtt_shift);
drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h +2 -0
@@ -65,6 +65,8 @@ struct xe_gt_sriov_vf_runtime {/** @regs.value: register value. */ u32 value; } *regs; +/** @ggtt_shift: difference in ggtt_base on last migration */ +s64 ggtt_shift; };/**
drivers/gpu/drm/xe/xe_guc_ct.c +146 -0
158 lines not on this page · raw message
drivers/gpu/drm/xe/xe_guc_ct.h +2 -0
@@ -22,6 +22,8 @@ void xe_guc_ct_snapshot_print(struct xe_guc_ct_snapshot *snapshot, struct drm_prvoid xe_guc_ct_snapshot_free (struct xe_guc_ct_snapshot *snapshot);void xe_guc_ct_print (struct xe_guc_ct *ct,struct drm_printer *p,bool want_ctb); +int xe_guc_ct_update_addresses (struct xe_guc_ct *ct); +static inline bool xe_guc_ct_enabled (struct xe_guc_ct *ct) {return ct->state ==XE_GUC_CT_STATE_ENABLED ;
drivers/gpu/drm/xe/xe_sriov_vf.c +12 -0
@@ -10,6 +10,7 @@#include "xe_gt.h" #include "xe_gt_sriov_printk.h" #include "xe_gt_sriov_vf.h" +#include "xe_guc_ct.h" #include "xe_pm.h" #include "xe_sriov.h" #include "xe_sriov_printk.h"
@@ -158,6 +159,15 @@ static int vf_post_migration_requery_guc(struct xe_device *xe)return ret; } +static void vf_post_migration_fixup_ctb (struct xe_device *xe) +{ +struct xe_gt *gt; +unsigned int id; + +for_each_gt (gt, xe, id) +xe_guc_ct_update_addresses (>->uc.guc.ct); +} +/* * vf_post_migration_imminent - Check if post-restore recovery is coming. * @xe: the &xe_device struct instance
@@ -217,6 +227,8 @@ static void vf_post_migration_recovery(struct xe_device *xe)vf_post_migration_fixup_ggtt_nodes (xe);/* FIXME: add the recovery steps */ +vf_post_migration_fixup_ctb (xe); +vf_post_migration_notify_resfix_done (xe);xe_pm_runtime_put (xe);drm_notice (&xe->drm,"migration recovery ended\n" );
Signature · 1 line
2.25.1
Re: [PATCH v2 3/3] drm/xe/vf: Fixup CTB send buffer messages after migration
Quoted 7 lines · Tomasz Lis
During post-migration recovery of a VF, it in necessary to update GGTT references included in messages which are going to be sent to GuC. GuC will start consuming messages after VF KMD will inform it about fixups being done; before that, the VF KMD is expected to update any H2G messages which are already in send buffer but were not consumed by GuC.
Quoted 6 lines
Only a small subset of messages allowed for VFs have GGTT references in them. This patch adds the functionality to parse the CTB send ring buffer and shift addresses contained within.
While fixing the CTB content,
ct->lockis not taken. This means the only barier taken remains GGTT address lock - which is ok,
typo barrier
Quoted 21 lines
because only requests with GGTT addresses matter, but it also means tail changes can happen during the CTB fixups execution (which may be ignored as any new messages will not have anything to fix).
The GGTT address locking will be introduced in a future series.
Signed-off-by Tomasz Lis <[email protected]>--- drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 2 + drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h | 2 + drivers/gpu/drm/xe/xe_guc_ct.c | 146 ++++++++++++++++++++++ drivers/gpu/drm/xe/xe_guc_ct.h | 2 + drivers/gpu/drm/xe/xe_sriov_vf.c | 12 ++ 5 files changed, 164 insertions(+)drivers/gpu/drm/xe/xe_gt_sriov_vf.c +0
-0@@ -920,12 +920,14 @@ static u64 drm_mm_node_end(struct drm_mm_node *node)static s64 vf_get_post_migration_ggtt_shift (struct xe_gt *gt)
drivers/gpu/drm/xe/xe_gt_sriov_vf.c static u64 drm_mm_node_end(struct drm_mm_node *node) · line 930
Quoted 10 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +2
-0{struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config; +struct xe_gt_sriov_vf_runtime *runtime = >->sriov.vf.runtime;struct xe_tile *tile =gt_to_tile (gt);u64 old_base;s64 ggtt_shift; old_base =drm_mm_node_end (&tile->sriov.vf.ggtt_balloon[0 ]->base); ggtt_shift = config->ggtt_base - (s64 )old_base; + runtime->ggtt_shift = ggtt_shift;
can't we store that when reading new config?
drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h struct xe_gt_sriov_vf_runtime { · line 69
Quoted 13 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +0
-0xe_gt_sriov_info (gt,"GGTT base shifted from %#llx to %#llx\n" , old_base, old_base + ggtt_shift);drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h +2
-0@@ -65,6 +65,8 @@ struct xe_gt_sriov_vf_runtime {/** @regs.value: register value. */ u32 value; } *regs; +/** @ggtt_shift: difference in ggtt_base on last migration */ +s64 ggtt_shift;
by 'VF runtime data' we meant here the missing HW data obtained at _runtime_ from the GuC/PF (see "runtime-regs")
this 'shift' is more like a migration specific data and doesn't really fit here, so better define a separate struct for it
Quoted 39 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h +0
-0};/** drivers/gpu/drm/xe/xe_guc_ct.c +21
-0@@ -84,6 +84,8 @@ struct g2h_fence {bool done; }; +#define make_u64 (hi, lo) ((u64)((u64)(u32)(hi) << 32 | (u32)(lo))) +static void g2h_fence_init (struct g2h_fence *g2h_fence,u32 *response_buffer) { g2h_fence->response_buffer = response_buffer;@@ -1620,6 +1622,150 @@ static void g2h_worker_func(struct work_struct *w)receive_g2h (ct); } +/* +* ct_update_addresses_in_message - Shift any GGTT addresses within +* a single message left within CTB from before post-migration recovery. +* @ct: pointer to CT struct of the target GuC +* @cmds: iomap buffer containing CT messages +* @head: start of the target message within the buffer +* @len: length of the target message +* @size: size of the commands buffer +* @shift: the address shift to be added to each GGTT reference +*/ +static void ct_update_addresses_in_message (struct xe_guc_ct *ct, +struct iosys_map *cmds,u32 head, +u32 len,u32 size,s64 shift) +{ +struct xe_device *xe =ct_to_xe (ct); +u32 action, i, n; +u32 msg[2 ]; +u64 offset; +
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1653
Quoted 10 lines
drivers/gpu/drm/xe/xe_guc_ct.c +10
-0+#define read32 (o, p) \ +do { \ + xe_map_memcpy_from(xe, msg, cmds, (head + p) * sizeof(u32), \ + 1 * sizeof(u32)); \ + o = msg[0]; \ +} while (0) +#define fixup64 (p) \ +do { \ + xe_map_memcpy_from(xe, msg, cmds, (head + p) * sizeof(u32), \ + 2 * sizeof(u32)); \
what about buffer wrap?
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1659
Quoted 6 lines
drivers/gpu/drm/xe/xe_guc_ct.c +6
-0+ offset =make_u64 (msg[1 ], msg[0 ]); \ + offset += shift; \ + msg[0 ] =lower_32_bits (offset); \ + msg[1 ] =upper_32_bits (offset); \ +xe_map_memcpy_to (xe, cmds, (head + p) *sizeof (u32), msg,2 *sizeof (u32)); \ +}while (0 )
those macros are quite ugly and violating many rules maybe they should be converted into inlines?
Quoted 33 lines
drivers/gpu/drm/xe/xe_guc_ct.c +33
-0+ +xe_map_memcpy_from (xe, msg, cmds, head *sizeof (u32), +1 *sizeof (u32)); + action =FIELD_GET (GUC_HXG_REQUEST_MSG_0_ACTION , msg[0 ]); +switch (action) { +case XE_GUC_ACTION_REGISTER_CONTEXT : +case XE_GUC_ACTION_REGISTER_CONTEXT_MULTI_LRC : +/* field wq_desc */ +fixup64 (5 ); +/* field wq_base */ +fixup64 (7 ); +if (action ==XE_GUC_ACTION_REGISTER_CONTEXT_MULTI_LRC ) { +/* field number_children */ +read32 (n,10 ); +/* field hwlrca and child lrcas */ +for (i =0 ; i < n; i++) +fixup64 (11 +2 * i); + }else { +/* field hwlrca */ +fixup64 (10 ); + } +break ; +default : +break ; + } +#undef fixup64 +#undef read32 +} + +static int ct_update_addresses_in_buffer (struct xe_guc_ct *ct, +struct guc_ctb *h2g, +s64 shift,u32 *mhead,s32 avail) +{
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1702
Quoted 10 lines
drivers/gpu/drm/xe/xe_guc_ct.c +10
-0+struct xe_device *xe =ct_to_xe (ct); +u32 head = *mhead; +u32 size = h2g->info.size; +u32 msg[1 ]; +u32 len; + +/* Read header */ +xe_map_memcpy_from (xe, msg, &h2g->cmds,sizeof (u32) * head, +sizeof (u32)); + len =FIELD_GET (GUC_CTB_MSG_0_NUM_DWORDS , msg[0 ]) +GUC_CTB_MSG_MIN_LEN ;
is it ok to access here all this CTB data without any lock?
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1709
Quoted 7 lines
drivers/gpu/drm/xe/xe_guc_ct.c +7
-0+ +if (unlikely (len > (u32 )avail)) { +struct xe_gt *gt =ct_to_gt (ct); + +xe_gt_err (gt,"H2G channel broken on read, avail=%d, len=%d, fixups skipped\n" , + avail, len); +return 0 ;
shouldn't we return some -errno to correctly report failure to the caller?
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1721
Quoted 12 lines
drivers/gpu/drm/xe/xe_guc_ct.c +12
-0+ } + + head = (head +1 ) % size; +ct_update_addresses_in_message (ct, &h2g->cmds, head, len -1 , size, shift); + *mhead = (head + len -1 ) % size; + +return avail - len; +} + +/** +* xe_guc_ct_update_addresses - Shifts any GGTT addresses left +* within CTB from before post-migration recovery.
"Fixup any pending H2G CTB messages by updating GGTT offsets in their payloads" ?
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1728
Quoted 7 lines
drivers/gpu/drm/xe/xe_guc_ct.c +7
-0+* @ct: pointer to CT struct of the target GuC +*/ +int xe_guc_ct_update_addresses (struct xe_guc_ct *ct) +{ +struct xe_guc *guc =ct_to_guc (ct); +struct xe_gt *gt =guc_to_gt (guc); +struct xe_gt_sriov_vf_runtime *runtime = >->sriov.vf.runtime;
please provide ggtt-shift explicitly to avoid direct access to the VF data from the CT code
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1739
Quoted 11 lines
drivers/gpu/drm/xe/xe_guc_ct.c +11
-0+struct guc_ctb *h2g = &ct->ctbs.h2g; +u32 head = h2g->info.head; +u32 tail =READ_ONCE (h2g->info.tail); +u32 size = h2g->info.size; +s32 avail; +s64 ggtt_shift; + +if (unlikely (h2g->info.broken)) +return -EPIPE ; + +XE_WARN_ON (head > size);
use xe_gt_WARN() or xe_gt_assert() instead - depends on what exactly do you want to check here
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1742
Quoted 3 lines
drivers/gpu/drm/xe/xe_guc_ct.c +3
-0+ +if (unlikely (tail >= size)) { + xe_gt_err(gt, "H2G channel has Invalid tail offset (%u >= %u)\n",
s/Invalid/invalid
Quoted 71 lines
drivers/gpu/drm/xe/xe_guc_ct.c +26
-0+ tail, size); + goto corrupted; + } + + avail = tail - head; + +/* beware of buffer wrap case */ +if (unlikely (avail <0 )) + avail += size; +xe_gt_dbg (gt,"available %d (%u:%u:%u)\n" , avail, head, tail, size); +XE_WARN_ON (avail <0 ); + + ggtt_shift = runtime->ggtt_shift; + +while (avail >0 ) + avail =ct_update_addresses_in_buffer (ct, h2g, ggtt_shift, &head, avail); + +return 0 ; + +corrupted: +xe_gt_err (gt,"Corrupted descriptor head=%u tail=%u\n" , + head, tail); + h2g->info.broken = true; +return -EPIPE ; +} +static struct xe_guc_ct_snapshot *guc_ct_snapshot_alloc (struct xe_guc_ct *ct,bool atomic,bool want_ctb) {drivers/gpu/drm/xe/xe_guc_ct.h +2
-0@@ -22,6 +22,8 @@ void xe_guc_ct_snapshot_print(struct xe_guc_ct_snapshot *snapshot, struct drm_prvoid xe_guc_ct_snapshot_free (struct xe_guc_ct_snapshot *snapshot);void xe_guc_ct_print (struct xe_guc_ct *ct,struct drm_printer *p,bool want_ctb); +int xe_guc_ct_update_addresses (struct xe_guc_ct *ct); +static inline bool xe_guc_ct_enabled (struct xe_guc_ct *ct) {return ct->state ==XE_GUC_CT_STATE_ENABLED ;drivers/gpu/drm/xe/xe_sriov_vf.c +10
-0@@ -10,6 +10,7 @@#include "xe_gt.h" #include "xe_gt_sriov_printk.h" #include "xe_gt_sriov_vf.h" +#include "xe_guc_ct.h" #include "xe_pm.h" #include "xe_sriov.h" #include "xe_sriov_printk.h" @@ -158,6 +159,15 @@ static int vf_post_migration_requery_guc(struct xe_device *xe)return ret; } +static void vf_post_migration_fixup_ctb (struct xe_device *xe) +{ +struct xe_gt *gt; +unsigned int id; + +for_each_gt (gt, xe, id) +xe_guc_ct_update_addresses (>->uc.guc.ct); +} +/* * vf_post_migration_imminent - Check if post-restore recovery is coming. * @xe: the &xe_device struct instance
drivers/gpu/drm/xe/xe_sriov_vf.c static void vf_post_migration_recovery(struct xe_device *xe) · line 231
Quoted 5 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +2
-0@@ -217,6 +227,8 @@ static void vf_post_migration_recovery(struct xe_device *xe)vf_post_migration_fixup_ggtt_nodes (xe);/* FIXME: add the recovery steps */ +vf_post_migration_fixup_ctb (xe); +
why this extra separation line?
Quoted 3 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +0
-0vf_post_migration_notify_resfix_done (xe);xe_pm_runtime_put (xe);drm_notice (&xe->drm,"migration recovery ended\n" );
Re: [PATCH v2 3/3] drm/xe/vf: Fixup CTB send buffer messages after migration
Quoted 8 lines · Michal Wajdeczko
Quoted 7 lines · Tomasz Lis
During post-migration recovery of a VF, it in necessary to update GGTT references included in messages which are going to be sent to GuC. GuC will start consuming messages after VF KMD will inform it about fixups being done; before that, the VF KMD is expected to update any H2G messages which are already in send buffer but were not consumed by GuC.
Quoted 7 lines
Quoted 6 lines
Only a small subset of messages allowed for VFs have GGTT references in them. This patch adds the functionality to parse the CTB send ring buffer and shift addresses contained within.
While fixing the CTB content,
ct->lockis not taken. This means the only barier taken remains GGTT address lock - which is ok,typo barrier
ack
Quoted 28 lines
Quoted 28 lines
because only requests with GGTT addresses matter, but it also means tail changes can happen during the CTB fixups execution (which may be ignored as any new messages will not have anything to fix).
The GGTT address locking will be introduced in a future series.
Signed-off-by Tomasz Lis<[email protected]>--- drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 2 + drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h | 2 + drivers/gpu/drm/xe/xe_guc_ct.c | 146 ++++++++++++++++++++++ drivers/gpu/drm/xe/xe_guc_ct.h | 2 + drivers/gpu/drm/xe/xe_sriov_vf.c | 12 ++ 5 files changed, 164 insertions(+)drivers/gpu/drm/xe/xe_gt_sriov_vf.c +1
-0@@ -920,12 +920,14 @@ static u64 drm_mm_node_end(struct drm_mm_node *node)static s64 vf_get_post_migration_ggtt_shift (struct xe_gt *gt) {struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config; +struct xe_gt_sriov_vf_runtime *runtime = >->sriov.vf.runtime;struct xe_tile *tile =gt_to_tile (gt);u64 old_base;s64 ggtt_shift;
Quoted 4 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c static u64 drm_mm_node_end(struct drm_mm_node *node) · line 930
Quoted 3 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +1
-0old_base =drm_mm_node_end (&tile->sriov.vf.ggtt_balloon[0 ]->base); ggtt_shift = config->ggtt_base - (s64 )old_base; + runtime->ggtt_shift = ggtt_shift;can't we store that when reading new config?
will do.
Quoted 17 lines
Quoted 9 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf.c +0
-0xe_gt_sriov_info (gt,"GGTT base shifted from %#llx to %#llx\n" , old_base, old_base + ggtt_shift);drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h +0
-0drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h struct xe_gt_sriov_vf_runtime { · line 69
Quoted 5 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h +2
-0@@ -65,6 +65,8 @@ struct xe_gt_sriov_vf_runtime {/** @regs.value: register value. */ u32 value; } *regs; +/** @ggtt_shift: difference in ggtt_base on last migration */ +s64 ggtt_shift;by 'VF runtime data' we meant here the missing HW data obtained at _runtime_ from the GuC/PF (see "runtime-regs")
Quoted 2 lines
this 'shift' is more like a migration specific data and doesn't really fit here, so better define a separate struct for it
since it's now part of getting config, will add it there.
Quoted 43 lines
Quoted 43 lines
drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h +0
-0};/** drivers/gpu/drm/xe/xe_guc_ct.c +24
-0@@ -84,6 +84,8 @@ struct g2h_fence {bool done; }; +#define make_u64 (hi, lo) ((u64)((u64)(u32)(hi) << 32 | (u32)(lo))) +static void g2h_fence_init (struct g2h_fence *g2h_fence,u32 *response_buffer) { g2h_fence->response_buffer = response_buffer;@@ -1620,6 +1622,150 @@ static void g2h_worker_func(struct work_struct *w)receive_g2h (ct); } +/* +* ct_update_addresses_in_message - Shift any GGTT addresses within +* a single message left within CTB from before post-migration recovery. +* @ct: pointer to CT struct of the target GuC +* @cmds: iomap buffer containing CT messages +* @head: start of the target message within the buffer +* @len: length of the target message +* @size: size of the commands buffer +* @shift: the address shift to be added to each GGTT reference +*/ +static void ct_update_addresses_in_message (struct xe_guc_ct *ct, +struct iosys_map *cmds,u32 head, +u32 len,u32 size,s64 shift) +{ +struct xe_device *xe =ct_to_xe (ct); +u32 action, i, n; +u32 msg[2 ]; +u64 offset; + +#define read32 (o, p) \ +do { \ + xe_map_memcpy_from(xe, msg, cmds, (head + p) * sizeof(u32), \
Quoted 8 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1653
Quoted 7 lines
drivers/gpu/drm/xe/xe_guc_ct.c +7
-0+ 1 * sizeof(u32)); \ + o = msg[0 ]; \ +} while (0) +#define fixup64 (p) \ +do { \ + xe_map_memcpy_from(xe, msg, cmds, (head + p) * sizeof(u32), \ + 2 * sizeof(u32)); \what about buffer wrap?
I don't see any implementation of ability to wrap with cutting a message in half. Rather, h2g_write() fills remaining area with null messages.
No special support is needed.
Quoted 9 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1659
Quoted 7 lines
drivers/gpu/drm/xe/xe_guc_ct.c +6
-0+ offset =make_u64 (msg[1 ], msg[0 ]); \ + offset += shift; \ + msg[0 ] =lower_32_bits (offset); \ + msg[1 ] =upper_32_bits (offset); \ +xe_map_memcpy_to (xe, cmds, (head + p) *sizeof (u32), msg,2 *sizeof (u32)); \ +}while (0 )those macros are quite ugly and violating many rules maybe they should be converted into inlines?
will do.
Quoted 37 lines
Quoted 37 lines
drivers/gpu/drm/xe/xe_guc_ct.c +36
-0+ +xe_map_memcpy_from (xe, msg, cmds, head *sizeof (u32), +1 *sizeof (u32)); + action =FIELD_GET (GUC_HXG_REQUEST_MSG_0_ACTION , msg[0 ]); +switch (action) { +case XE_GUC_ACTION_REGISTER_CONTEXT : +case XE_GUC_ACTION_REGISTER_CONTEXT_MULTI_LRC : +/* field wq_desc */ +fixup64 (5 ); +/* field wq_base */ +fixup64 (7 ); +if (action ==XE_GUC_ACTION_REGISTER_CONTEXT_MULTI_LRC ) { +/* field number_children */ +read32 (n,10 ); +/* field hwlrca and child lrcas */ +for (i =0 ; i < n; i++) +fixup64 (11 +2 * i); + }else { +/* field hwlrca */ +fixup64 (10 ); + } +break ; +default : +break ; + } +#undef fixup64 +#undef read32 +} + +static int ct_update_addresses_in_buffer (struct xe_guc_ct *ct, +struct guc_ctb *h2g, +s64 shift,u32 *mhead,s32 avail) +{ +struct xe_device *xe =ct_to_xe (ct); +u32 head = *mhead; +u32 size = h2g->info.size;
Quoted 8 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1702
Quoted 7 lines
drivers/gpu/drm/xe/xe_guc_ct.c +7
-0+u32 msg[1 ]; +u32 len; + +/* Read header */ +xe_map_memcpy_from (xe, msg, &h2g->cmds,sizeof (u32) * head, +sizeof (u32)); + len =FIELD_GET (GUC_CTB_MSG_0_NUM_DWORDS , msg[0 ]) +GUC_CTB_MSG_MIN_LEN ;is it ok to access here all this CTB data without any lock?
Yes, it is ok. The lack of lock is explained in patch comment.
Quoted 8 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1709
Quoted 7 lines
drivers/gpu/drm/xe/xe_guc_ct.c +7
-0+ +if (unlikely (len > (u32 )avail)) { +struct xe_gt *gt =ct_to_gt (ct); + +xe_gt_err (gt,"H2G channel broken on read, avail=%d, len=%d, fixups skipped\n" , + avail, len); +return 0 ;shouldn't we return some -errno to correctly report failure to the caller?
Why would we do this? What error handling would we do?
We are within a delicate, unusual situation during the recovery. The goal of migration recovery is clearly stated, and it is not verification of the state of buffers.
If that condition was reached, then:
* Maybe we've got double migration at a very specific time and we're operating on a living GuC. In that case, we should just back off and not touch it. (low probability of hitting that precise timings)
* Maybe the CTB was broken before migration, or got broken while restoring - the post-migration recovery is not a place to react on that. (low probability, as we check the head and tail before)
* Maybe our CTB parser is imperfect, or our locking will be imperfect (or more likely, it will regress due to unrelated changes) - in that case we also should back off.
In general, if we've failed with CTB fixups, it doesn't mean the GFX is unusable. There is actually much greater chance that no outgoing message required fixups - most workloads are not registering contexts every second. There is no point in propagating errors which do not break the recovery. And if something is broken, then we should have mechanisms within driver to deal with that. Post-migration recovery is not for that.
Quoted 15 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1721
Quoted 13 lines
drivers/gpu/drm/xe/xe_guc_ct.c +12
-0+ } + + head = (head +1 ) % size; +ct_update_addresses_in_message (ct, &h2g->cmds, head, len -1 , size, shift); + *mhead = (head + len -1 ) % size; + +return avail - len; +} + +/** +* xe_guc_ct_update_addresses - Shifts any GGTT addresses left +* within CTB from before post-migration recovery. "Fixup any pending H2G CTB messages by updating GGTT offsets in their payloads" ?
ok, will switch to this.
Quoted 10 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1728
Quoted 8 lines
drivers/gpu/drm/xe/xe_guc_ct.c +7
-0+* @ct: pointer to CT struct of the target GuC +*/ +int xe_guc_ct_update_addresses (struct xe_guc_ct *ct) +{ +struct xe_guc *guc =ct_to_guc (ct); +struct xe_gt *gt =guc_to_gt (guc); +struct xe_gt_sriov_vf_runtime *runtime = >->sriov.vf.runtime;please provide ggtt-shift explicitly to avoid direct access to the VF data from the CT code
will do.
Quoted 14 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1739
Quoted 12 lines
drivers/gpu/drm/xe/xe_guc_ct.c +11
-0+struct guc_ctb *h2g = &ct->ctbs.h2g; +u32 head = h2g->info.head; +u32 tail =READ_ONCE (h2g->info.tail); +u32 size = h2g->info.size; +s32 avail; +s64 ggtt_shift; + +if (unlikely (h2g->info.broken)) +return -EPIPE ; + +XE_WARN_ON (head > size);use
xe_gt_WARN()orxe_gt_assert()instead - depends on what exactly do you want to check here
ack
Quoted 5 lines
drivers/gpu/drm/xe/xe_guc_ct.c static void g2h_worker_func(struct work_struct *w) · line 1742
Quoted 4 lines
drivers/gpu/drm/xe/xe_guc_ct.c +3
-0+ +if (unlikely (tail >= size)) { + xe_gt_err(gt, "H2G channel has Invalid tail offset (%u >= %u)\n",s/Invalid/invalid
ok
Quoted 72 lines
Quoted 72 lines
drivers/gpu/drm/xe/xe_guc_ct.c +26
-0+ tail, size); + goto corrupted; + } + + avail = tail - head; + +/* beware of buffer wrap case */ +if (unlikely (avail <0 )) + avail += size; +xe_gt_dbg (gt,"available %d (%u:%u:%u)\n" , avail, head, tail, size); +XE_WARN_ON (avail <0 ); + + ggtt_shift = runtime->ggtt_shift; + +while (avail >0 ) + avail =ct_update_addresses_in_buffer (ct, h2g, ggtt_shift, &head, avail); + +return 0 ; + +corrupted: +xe_gt_err (gt,"Corrupted descriptor head=%u tail=%u\n" , + head, tail); + h2g->info.broken = true; +return -EPIPE ; +} +static struct xe_guc_ct_snapshot *guc_ct_snapshot_alloc (struct xe_guc_ct *ct,bool atomic,bool want_ctb) {drivers/gpu/drm/xe/xe_guc_ct.h +2
-0@@ -22,6 +22,8 @@ void xe_guc_ct_snapshot_print(struct xe_guc_ct_snapshot *snapshot, struct drm_prvoid xe_guc_ct_snapshot_free (struct xe_guc_ct_snapshot *snapshot);void xe_guc_ct_print (struct xe_guc_ct *ct,struct drm_printer *p,bool want_ctb); +int xe_guc_ct_update_addresses (struct xe_guc_ct *ct); +static inline bool xe_guc_ct_enabled (struct xe_guc_ct *ct) {return ct->state ==XE_GUC_CT_STATE_ENABLED ;drivers/gpu/drm/xe/xe_sriov_vf.c +10
-0@@ -10,6 +10,7 @@#include "xe_gt.h" #include "xe_gt_sriov_printk.h" #include "xe_gt_sriov_vf.h" +#include "xe_guc_ct.h" #include "xe_pm.h" #include "xe_sriov.h" #include "xe_sriov_printk.h" @@ -158,6 +159,15 @@ static int vf_post_migration_requery_guc(struct xe_device *xe)return ret; } +static void vf_post_migration_fixup_ctb (struct xe_device *xe) +{ +struct xe_gt *gt; +unsigned int id; + +for_each_gt (gt, xe, id) +xe_guc_ct_update_addresses (>->uc.guc.ct); +} +/* * vf_post_migration_imminent - Check if post-restore recovery is coming. * @xe: the &xe_device struct instance @@ -217,6 +227,8 @@ static void vf_post_migration_recovery(struct xe_device *xe)
Quoted 5 lines
drivers/gpu/drm/xe/xe_sriov_vf.c static void vf_post_migration_recovery(struct xe_device *xe) · line 231
Quoted 4 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +2
-0vf_post_migration_fixup_ggtt_nodes (xe);/* FIXME: add the recovery steps */ +vf_post_migration_fixup_ctb (xe); +why this extra separation line?
it separates fixups from finalization. Similarly, there's a line at start of fixups.
-Tomasz
Quoted 3 lines
Quoted 3 lines
drivers/gpu/drm/xe/xe_sriov_vf.c +0
-0vf_post_migration_notify_resfix_done (xe);xe_pm_runtime_put (xe);drm_notice (&xe->drm,"migration recovery ended\n" );
Patchwork
CI✓ CI.Patch_applied: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
In reply to Tomasz Lis== Series Details ==
== Series Details ==
Series: drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
URL : https://patchwork.freedesktop.org/series/141439/
State : success
== Summary ==
=== Applying kernel patches on branch 'drm-tip' with base: ===
Base commit: 9a7388467f79 drm-tip: 2024y-11m-16d-00h-00m-45s UTC integration manifest === git am output follows ===
Applying: drm/drm_mm: Safe macro for iterating through nodes in range
Applying: drm/xe/sriov: Shifting GGTT area post migration
Applying: drm/xe/vf: Fixup CTB send buffer messages after migration
Patchwork
CI✗ CI.checkpatch: warning for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
In reply to Tomasz Lis== Series Details ==
== Series Details ==
Series: drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
URL : https://patchwork.freedesktop.org/series/141439/
State : warning
== Summary ==
+ KERNEL=/kernel
+ git clone https://gitlab.freedesktop.org/drm/maintainer-tools mt Cloning into 'mt'...
warning: redirecting to https://gitlab.freedesktop.org/drm/maintainer-tools.git/
+ git -C mt rev-list -n1 origin/master 30ab6715fc09baee6cc14cb3c89ad8858688d474
+ cd /kernel
+ git config --global --add safe.directory /kernel
+ git log -n1
commit 92e00ec09ea2e7026264fbd635da4c9bde405270
Author: Tomasz Lis <[email protected]> Date: Sat Nov 16 03:12:38 2024 +0100
drm/xe/vf: Fixup CTB send buffer messages after migration
During post-migration recovery of a VF, it in necessary to update GGTT references included in messages which are going to be sent to GuC. GuC will start consuming messages after VF KMD will inform it about fixups being done; before that, the VF KMD is expected to update any H2G messages which are already in send buffer but were not consumed by GuC.
Only a small subset of messages allowed for VFs have GGTT references in them. This patch adds the functionality to parse the CTB send ring buffer and shift addresses contained within.
While fixing the CTB content, ct->lock is not taken. This means the only barier taken remains GGTT address lock - which is ok, because only requests with GGTT addresses matter, but it also means tail changes can happen during the CTB fixups execution (which may be ignored as any new messages will not have anything to fix).
The GGTT address locking will be introduced in a future series.
+ /mt/dim checkpatch 9a7388467f79fb74c67a2444c5b1add91652f89e drm-intel 4d2ba25c1794 drm/drm_mm: Safe macro for iterating through nodes in range -:32: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'node__' - possible side-effects? #32: FILE: include/drm/drm_mm.h:520:
+#define drm_mm_for_each_node_in_range_safe(node__, next__, mm__, start__, end__) \
+ for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1), \
+ next__ = list_next_entry(node__, node_list); \
+ node__->start < (end__); \
+ node__ = next__, next__ = list_next_entry(next__, node_list))
-:32: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'next__' - possible side-effects? #32: FILE: include/drm/drm_mm.h:520:
+#define drm_mm_for_each_node_in_range_safe(node__, next__, mm__, start__, end__) \
+ for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1), \
+ next__ = list_next_entry(node__, node_list); \
+ node__->start < (end__); \
+ node__ = next__, next__ = list_next_entry(next__, node_list))
-:32: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'end__' - possible side-effects? #32: FILE: include/drm/drm_mm.h:520:
+#define drm_mm_for_each_node_in_range_safe(node__, next__, mm__, start__, end__) \
+ for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1), \
+ next__ = list_next_entry(node__, node_list); \
+ node__->start < (end__); \
+ node__ = next__, next__ = list_next_entry(next__, node_list))
-:33: CHECK:SPACING: spaces preferred around that '-' (ctx:VxV) #33: FILE: include/drm/drm_mm.h:521:
+ for (node__ = __drm_mm_interval_first((mm__), (start__), (end__)-1), \
^
total: 0 errors, 0 warnings, 4 checks, 25 lines checked 7ad5c07295cc drm/xe/sriov: Shifting GGTT area post migration -:45: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #45: FILE: drivers/gpu/drm/xe/xe_gt_sriov_vf.c:931:
+ xe_gt_sriov_info(gt, "GGTT base shifted from %#llx to %#llx\n",
+ old_base, old_base + ggtt_shift);
-:51: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #51: FILE: drivers/gpu/drm/xe/xe_gt_sriov_vf.c:937:
+static void xe_ggtt_mm_shift_nodes(struct xe_ggtt *ggtt, struct drm_mm_node *balloon_beg,
+ struct drm_mm_node *balloon_fin, s64 shift)
-:151: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #151: FILE: drivers/gpu/drm/xe/xe_gt_sriov_vf.c:1037:
+static void xe_ggtt_node_shift_nodes(struct xe_ggtt *ggtt, struct xe_ggtt_node *balloon_beg,
+ struct xe_ggtt_node *balloon_fin, s64 shift)
-:156: CHECK:BRACES: braces {} should be used on all arms of this statement #156: FILE: drivers/gpu/drm/xe/xe_gt_sriov_vf.c:1042:
+ if (balloon_beg && balloon_beg->ggtt)
[...]
+ else {
[...]
-:158: CHECK:BRACES: Unbalanced braces around else statement #158: FILE: drivers/gpu/drm/xe/xe_gt_sriov_vf.c:1044:
+ else {
-:166: CHECK:BRACES: braces {} should be used on all arms of this statement #166: FILE: drivers/gpu/drm/xe/xe_gt_sriov_vf.c:1052:
+ if (balloon_fin && balloon_fin->ggtt)
[...]
+ else {
[...]
-:168: CHECK:BRACES: Unbalanced braces around else statement #168: FILE: drivers/gpu/drm/xe/xe_gt_sriov_vf.c:1054:
+ else {
total: 0 errors, 0 warnings, 7 checks, 221 lines checked 92e00ec09ea2 drm/xe/vf: Fixup CTB send buffer messages after migration -:87: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #87: FILE: drivers/gpu/drm/xe/xe_guc_ct.c:1636:
+static void ct_update_addresses_in_message(struct xe_guc_ct *ct,
+ struct iosys_map *cmds, u32 head,
-:95: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'p' may be better as '(p)' to avoid precedence issues #95: FILE: drivers/gpu/drm/xe/xe_guc_ct.c:1644:
+#define read32(o, p) \
+do { \
+ xe_map_memcpy_from(xe, msg, cmds, (head + p) * sizeof(u32), \
+ 1 * sizeof(u32)); \
+ o = msg[0]; \
+} while (0)
-:101: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'p' - possible side-effects? #101: FILE: drivers/gpu/drm/xe/xe_guc_ct.c:1650:
+#define fixup64(p) \
+do { \
+ xe_map_memcpy_from(xe, msg, cmds, (head + p) * sizeof(u32), \
+ 2 * sizeof(u32)); \
+ offset = make_u64(msg[1], msg[0]); \
+ offset += shift; \
+ msg[0] = lower_32_bits(offset); \
+ msg[1] = upper_32_bits(offset); \
+ xe_map_memcpy_to(xe, cmds, (head + p) * sizeof(u32), msg, 2 * sizeof(u32)); \
+} while (0)
-:101: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'p' may be better as '(p)' to avoid precedence issues #101: FILE: drivers/gpu/drm/xe/xe_guc_ct.c:1650:
+#define fixup64(p) \
+do { \
+ xe_map_memcpy_from(xe, msg, cmds, (head + p) * sizeof(u32), \
+ 2 * sizeof(u32)); \
+ offset = make_u64(msg[1], msg[0]); \
+ offset += shift; \
+ msg[0] = lower_32_bits(offset); \
+ msg[1] = upper_32_bits(offset); \
+ xe_map_memcpy_to(xe, cmds, (head + p) * sizeof(u32), msg, 2 * sizeof(u32)); \
+} while (0)
-:194: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #194: FILE: drivers/gpu/drm/xe/xe_guc_ct.c:1743:
+ xe_gt_err(gt, "H2G channel has Invalid tail offset (%u >= %u)\n",
+ tail, size);
-:215: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #215: FILE: drivers/gpu/drm/xe/xe_guc_ct.c:1764:
+ xe_gt_err(gt, "Corrupted descriptor head=%u tail=%u\n",
+ head, tail);
total: 0 errors, 0 warnings, 6 checks, 218 lines checked
Patchwork
CI✓ CI.KUnit: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
In reply to Tomasz Lis== Series Details ==
== Series Details ==
Series: drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
URL : https://patchwork.freedesktop.org/series/141439/
State : success
== Summary ==
+ trap cleanup EXIT
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/xe/.kunitconfig [02:17:44] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
[02:17:48] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json ARCH=um O=.kunit --jobs=48
../lib/iomap.c:156:5: warning: no previous prototype for ‘ioread64_lo_hi’ [-Wmissing-prototypes]
156 | u64 ioread64_lo_hi(const void __iomem *addr)
| ^~~~~~~~~~~~~~
../lib/iomap.c:163:5: warning: no previous prototype for ‘ioread64_hi_lo’ [-Wmissing-prototypes]
163 | u64 ioread64_hi_lo(const void __iomem *addr)
| ^~~~~~~~~~~~~~
../lib/iomap.c:170:5: warning: no previous prototype for ‘ioread64be_lo_hi’ [-Wmissing-prototypes]
170 | u64 ioread64be_lo_hi(const void __iomem *addr)
| ^~~~~~~~~~~~~~~~
../lib/iomap.c:178:5: warning: no previous prototype for ‘ioread64be_hi_lo’ [-Wmissing-prototypes]
178 | u64 ioread64be_hi_lo(const void __iomem *addr)
| ^~~~~~~~~~~~~~~~
../lib/iomap.c:264:6: warning: no previous prototype for ‘iowrite64_lo_hi’ [-Wmissing-prototypes]
264 | void iowrite64_lo_hi(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~
../lib/iomap.c:272:6: warning: no previous prototype for ‘iowrite64_hi_lo’ [-Wmissing-prototypes]
272 | void iowrite64_hi_lo(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~
../lib/iomap.c:280:6: warning: no previous prototype for ‘iowrite64be_lo_hi’ [-Wmissing-prototypes]
280 | void iowrite64be_lo_hi(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~~~
../lib/iomap.c:288:6: warning: no previous prototype for ‘iowrite64be_hi_lo’ [-Wmissing-prototypes]
288 | void iowrite64be_hi_lo(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~~~[02:18:16] Starting KUnit Kernel (1/1)...
[02:18:16] ============================================================ Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt [02:18:17] =================== guc_dbm (7 subtests) =================== [02:18:17] [PASSED] test_empty [02:18:17] [PASSED] test_default [02:18:17] ======================== test_size ======================== [02:18:17] [PASSED] 4 [02:18:17] [PASSED] 8 [02:18:17] [PASSED] 32 [02:18:17] [PASSED] 256 [02:18:17] ==================== [PASSED] test_size ==================== [02:18:17] ======================= test_reuse ======================== [02:18:17] [PASSED] 4 [02:18:17] [PASSED] 8 [02:18:17] [PASSED] 32 [02:18:17] [PASSED] 256 [02:18:17] =================== [PASSED] test_reuse ==================== [02:18:17] =================== test_range_overlap ==================== [02:18:17] [PASSED] 4 [02:18:17] [PASSED] 8 [02:18:17] [PASSED] 32 [02:18:17] [PASSED] 256 [02:18:17] =============== [PASSED] test_range_overlap ================ [02:18:17] =================== test_range_compact ==================== [02:18:17] [PASSED] 4 [02:18:17] [PASSED] 8 [02:18:17] [PASSED] 32 [02:18:17] [PASSED] 256 [02:18:17] =============== [PASSED] test_range_compact ================ [02:18:17] ==================== test_range_spare ===================== [02:18:17] [PASSED] 4 [02:18:17] [PASSED] 8 [02:18:17] [PASSED] 32 [02:18:17] [PASSED] 256 [02:18:17] ================ [PASSED] test_range_spare ================= [02:18:17] ===================== [PASSED] guc_dbm ===================== [02:18:17] =================== guc_idm (6 subtests) =================== [02:18:17] [PASSED] bad_init [02:18:17] [PASSED] no_init [02:18:17] [PASSED] init_fini [02:18:17] [PASSED] check_used [02:18:17] [PASSED] check_quota [02:18:17] [PASSED] check_all [02:18:17] ===================== [PASSED] guc_idm ===================== [02:18:17] ================== no_relay (3 subtests) =================== [02:18:17] [PASSED] xe_drops_guc2pf_if_not_ready [02:18:17] [PASSED] xe_drops_guc2vf_if_not_ready [02:18:17] [PASSED] xe_rejects_send_if_not_ready [02:18:17] ==================== [PASSED] no_relay ===================== [02:18:17] ================== pf_relay (14 subtests) ================== [02:18:17] [PASSED] pf_rejects_guc2pf_too_short [02:18:17] [PASSED] pf_rejects_guc2pf_too_long [02:18:17] [PASSED] pf_rejects_guc2pf_no_payload [02:18:17] [PASSED] pf_fails_no_payload [02:18:17] [PASSED] pf_fails_bad_origin [02:18:17] [PASSED] pf_fails_bad_type [02:18:17] [PASSED] pf_txn_reports_error [02:18:17] [PASSED] pf_txn_sends_pf2guc [02:18:17] [PASSED] pf_sends_pf2guc [02:18:17] [SKIPPED] pf_loopback_nop [02:18:17] [SKIPPED] pf_loopback_echo [02:18:17] [SKIPPED] pf_loopback_fail [02:18:17] [SKIPPED] pf_loopback_busy [02:18:17] [SKIPPED] pf_loopback_retry [02:18:17] ==================== [PASSED] pf_relay ===================== [02:18:17] ================== vf_relay (3 subtests) =================== [02:18:17] [PASSED] vf_rejects_guc2vf_too_short [02:18:17] [PASSED] vf_rejects_guc2vf_too_long [02:18:17] [PASSED] vf_rejects_guc2vf_no_payload [02:18:17] ==================== [PASSED] vf_relay ===================== [02:18:17] ================= pf_service (11 subtests) ================= [02:18:17] [PASSED] pf_negotiate_any [02:18:17] [PASSED] pf_negotiate_base_match [02:18:17] [PASSED] pf_negotiate_base_newer [02:18:17] [PASSED] pf_negotiate_base_next [02:18:17] [SKIPPED] pf_negotiate_base_older [02:18:17] [PASSED] pf_negotiate_base_prev [02:18:17] [PASSED] pf_negotiate_latest_match [02:18:17] [PASSED] pf_negotiate_latest_newer [02:18:17] [PASSED] pf_negotiate_latest_next [02:18:17] [SKIPPED] pf_negotiate_latest_older [02:18:17] [SKIPPED] pf_negotiate_latest_prev [02:18:17] =================== [PASSED] pf_service ==================== [02:18:17] ===================== lmtt (1 subtest) ===================== [02:18:17] ======================== test_ops ========================= [02:18:17] [PASSED] 2-level [02:18:17] [PASSED] multi-level [02:18:17] ==================== [PASSED] test_ops ===================== [02:18:17] ====================== [PASSED] lmtt ======================= [02:18:17] =================== xe_mocs (2 subtests) =================== [02:18:17] ================ xe_live_mocs_kernel_kunit ================ [02:18:17] =========== [SKIPPED] xe_live_mocs_kernel_kunit ============ [02:18:17] ================ xe_live_mocs_reset_kunit ================= [02:18:17] ============ [SKIPPED] xe_live_mocs_reset_kunit ============ [02:18:17] ==================== [SKIPPED] xe_mocs ===================== [02:18:17] ================= xe_migrate (2 subtests) ================== [02:18:17] ================= xe_migrate_sanity_kunit ================= [02:18:17] ============ [SKIPPED] xe_migrate_sanity_kunit ============= [02:18:17] ================== xe_validate_ccs_kunit ================== [02:18:17] ============= [SKIPPED] xe_validate_ccs_kunit ============== [02:18:17] =================== [SKIPPED] xe_migrate =================== [02:18:17] ================== xe_dma_buf (1 subtest) ================== [02:18:17] ==================== xe_dma_buf_kunit ===================== [02:18:17] ================ [SKIPPED] xe_dma_buf_kunit ================ [02:18:17] =================== [SKIPPED] xe_dma_buf =================== [02:18:17] ==================== xe_bo (3 subtests) ==================== [02:18:17] ================== xe_ccs_migrate_kunit =================== [02:18:17] ============== [SKIPPED] xe_ccs_migrate_kunit ============== [02:18:17] ==================== xe_bo_evict_kunit ==================== [02:18:17] =============== [SKIPPED] xe_bo_evict_kunit ================ [02:18:17] =================== xe_bo_shrink_kunit ==================== [02:18:17] =============== [SKIPPED] xe_bo_shrink_kunit =============== [02:18:17] ===================== [SKIPPED] xe_bo ====================== [02:18:17] ==================== args (11 subtests) ==================== [02:18:17] [PASSED] count_args_test [02:18:17] [PASSED] call_args_example [02:18:17] [PASSED] call_args_test [02:18:17] [PASSED] drop_first_arg_example [02:18:17] [PASSED] drop_first_arg_test [02:18:17] [PASSED] first_arg_example [02:18:17] [PASSED] first_arg_test [02:18:17] [PASSED] last_arg_example [02:18:17] [PASSED] last_arg_test [02:18:17] [PASSED] pick_arg_example [02:18:17] [PASSED] sep_comma_examplestty: 'standard input': Inappropriate ioctl for device
[02:18:17] ====================== [PASSED] args ======================= [02:18:17] =================== xe_pci (2 subtests) ==================== [02:18:17] [PASSED] xe_gmdid_graphics_ip
[02:18:17] [PASSED] xe_gmdid_media_ip
[02:18:17] ===================== [PASSED] xe_pci ====================== [02:18:17] =================== xe_rtp (2 subtests) ==================== [02:18:17] =============== xe_rtp_process_to_sr_tests ================ [02:18:17] [PASSED] coalesce-same-reg
[02:18:17] [PASSED] no-match-no-add
[02:18:17] [PASSED] match-or
[02:18:17] [PASSED] match-or-xfail
[02:18:17] [PASSED] no-match-no-add-multiple-rules
[02:18:17] [PASSED] two-regs-two-entries
[02:18:17] [PASSED] clr-one-set-other
[02:18:17] [PASSED] set-field
[02:18:17] [PASSED] conflict-duplicate
[02:18:17] [PASSED] conflict-not-disjoint
[02:18:17] [PASSED] conflict-reg-type
[02:18:17] =========== [PASSED] xe_rtp_process_to_sr_tests ============ [02:18:17] ================== xe_rtp_process_tests =================== [02:18:17] [PASSED] active1
[02:18:17] [PASSED] active2
[02:18:17] [PASSED] active-inactive
[02:18:17] [PASSED] inactive-active
[02:18:17] [PASSED] inactive-1st_or_active-inactive
[02:18:17] [PASSED] inactive-2nd_or_active-inactive
[02:18:17] [PASSED] inactive-last_or_active-inactive
[02:18:17] [PASSED] inactive-no_or_active-inactive
[02:18:17] ============== [PASSED] xe_rtp_process_tests =============== [02:18:17] ===================== [PASSED] xe_rtp ====================== [02:18:17] ==================== xe_wa (1 subtest) ===================== [02:18:17] ======================== xe_wa_gt ========================= [02:18:17] [PASSED] TIGERLAKE (B0)
[02:18:17] [PASSED] DG1 (A0)
[02:18:17] [PASSED] DG1 (B0)
[02:18:17] [PASSED] ALDERLAKE_S (A0)
[02:18:17] [PASSED] ALDERLAKE_S (B0)
[02:18:17] [PASSED] ALDERLAKE_S (C0)
[02:18:17] [PASSED] ALDERLAKE_S (D0)
[02:18:17] [PASSED] ALDERLAKE_P (A0)
[02:18:17] [PASSED] ALDERLAKE_P (B0)
[02:18:17] [PASSED] ALDERLAKE_P (C0)
[02:18:17] [PASSED] ALDERLAKE_S_RPLS (D0)
[02:18:17] [PASSED] ALDERLAKE_P_RPLU (E0)
[02:18:17] [PASSED] DG2_G10 (C0)
[02:18:17] [PASSED] DG2_G11 (B1)
[02:18:17] [PASSED] DG2_G12 (A1)
[02:18:17] [PASSED] METEORLAKE (g:A0, m:A0)
[02:18:17] [PASSED] METEORLAKE (g:A0, m:A0)
[02:18:17] [PASSED] METEORLAKE (g:A0, m:A0)
[02:18:17] [PASSED] LUNARLAKE (g:A0, m:A0)
[02:18:17] [PASSED] LUNARLAKE (g:B0, m:A0)
[02:18:17] [PASSED] BATTLEMAGE (g:A0, m:A1)
[02:18:17] ==================== [PASSED] xe_wa_gt ===================== [02:18:17] ====================== [PASSED] xe_wa ====================== [02:18:17] ============================================================ [02:18:17] Testing complete. Ran 122 tests: passed: 106, skipped: 16 [02:18:17] Elapsed time: 32.863s total, 4.463s configuring, 28.133s building, 0.223s running
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/tests/.kunitconfig [02:18:17] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
[02:18:18] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json ARCH=um O=.kunit --jobs=48
../lib/iomap.c:156:5: warning: no previous prototype for ‘ioread64_lo_hi’ [-Wmissing-prototypes]
156 | u64 ioread64_lo_hi(const void __iomem *addr)
| ^~~~~~~~~~~~~~
../lib/iomap.c:163:5: warning: no previous prototype for ‘ioread64_hi_lo’ [-Wmissing-prototypes]
163 | u64 ioread64_hi_lo(const void __iomem *addr)
| ^~~~~~~~~~~~~~
../lib/iomap.c:170:5: warning: no previous prototype for ‘ioread64be_lo_hi’ [-Wmissing-prototypes]
170 | u64 ioread64be_lo_hi(const void __iomem *addr)
| ^~~~~~~~~~~~~~~~
../lib/iomap.c:178:5: warning: no previous prototype for ‘ioread64be_hi_lo’ [-Wmissing-prototypes]
178 | u64 ioread64be_hi_lo(const void __iomem *addr)
| ^~~~~~~~~~~~~~~~
../lib/iomap.c:264:6: warning: no previous prototype for ‘iowrite64_lo_hi’ [-Wmissing-prototypes]
264 | void iowrite64_lo_hi(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~
../lib/iomap.c:272:6: warning: no previous prototype for ‘iowrite64_hi_lo’ [-Wmissing-prototypes]
272 | void iowrite64_hi_lo(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~
../lib/iomap.c:280:6: warning: no previous prototype for ‘iowrite64be_lo_hi’ [-Wmissing-prototypes]
280 | void iowrite64be_lo_hi(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~~~
../lib/iomap.c:288:6: warning: no previous prototype for ‘iowrite64be_hi_lo’ [-Wmissing-prototypes]
288 | void iowrite64be_hi_lo(u64 val, void __iomem *addr)
| ^~~~~~~~~~~~~~~~~[02:18:41] Starting KUnit Kernel (1/1)...
[02:18:41] ============================================================ Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt [02:18:41] ================== drm_buddy (7 subtests) ================== [02:18:41] [PASSED] drm_test_buddy_alloc_limit [02:18:41] [PASSED] drm_test_buddy_alloc_optimistic [02:18:41] [PASSED] drm_test_buddy_alloc_pessimistic [02:18:41] [PASSED] drm_test_buddy_alloc_pathological [02:18:41] [PASSED] drm_test_buddy_alloc_contiguous [02:18:41] [PASSED] drm_test_buddy_alloc_clear [02:18:41] [PASSED] drm_test_buddy_alloc_range_bias [02:18:41] ==================== [PASSED] drm_buddy ==================== [02:18:41] ============= drm_cmdline_parser (40 subtests) ============= [02:18:41] [PASSED] drm_test_cmdline_force_d_only [02:18:41] [PASSED] drm_test_cmdline_force_D_only_dvi [02:18:41] [PASSED] drm_test_cmdline_force_D_only_hdmi [02:18:41] [PASSED] drm_test_cmdline_force_D_only_not_digital [02:18:41] [PASSED] drm_test_cmdline_force_e_only [02:18:41] [PASSED] drm_test_cmdline_res [02:18:41] [PASSED] drm_test_cmdline_res_vesa [02:18:41] [PASSED] drm_test_cmdline_res_vesa_rblank [02:18:41] [PASSED] drm_test_cmdline_res_rblank [02:18:41] [PASSED] drm_test_cmdline_res_bpp [02:18:41] [PASSED] drm_test_cmdline_res_refresh [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh_margins [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh_force_off [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_analog [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_digital [02:18:41] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced_margins_force_on [02:18:41] [PASSED] drm_test_cmdline_res_margins_force_on [02:18:41] [PASSED] drm_test_cmdline_res_vesa_margins [02:18:41] [PASSED] drm_test_cmdline_name [02:18:41] [PASSED] drm_test_cmdline_name_bpp [02:18:41] [PASSED] drm_test_cmdline_name_option [02:18:41] [PASSED] drm_test_cmdline_name_bpp_option [02:18:41] [PASSED] drm_test_cmdline_rotate_0 [02:18:41] [PASSED] drm_test_cmdline_rotate_90 [02:18:41] [PASSED] drm_test_cmdline_rotate_180 [02:18:41] [PASSED] drm_test_cmdline_rotate_270 [02:18:41] [PASSED] drm_test_cmdline_hmirror [02:18:41] [PASSED] drm_test_cmdline_vmirror [02:18:41] [PASSED] drm_test_cmdline_margin_options [02:18:41] [PASSED] drm_test_cmdline_multiple_options [02:18:41] [PASSED] drm_test_cmdline_bpp_extra_and_option [02:18:41] [PASSED] drm_test_cmdline_extra_and_option [02:18:41] [PASSED] drm_test_cmdline_freestanding_options [02:18:41] [PASSED] drm_test_cmdline_freestanding_force_e_and_options [02:18:41] [PASSED] drm_test_cmdline_panel_orientation [02:18:41] ================ drm_test_cmdline_invalid ================= [02:18:41] [PASSED] margin_only [02:18:41] [PASSED] interlace_only [02:18:41] [PASSED] res_missing_x [02:18:41] [PASSED] res_missing_y [02:18:41] [PASSED] res_bad_y [02:18:41] [PASSED] res_missing_y_bpp [02:18:41] [PASSED] res_bad_bpp [02:18:41] [PASSED] res_bad_refresh [02:18:41] [PASSED] res_bpp_refresh_force_on_off [02:18:41] [PASSED] res_invalid_mode [02:18:41] [PASSED] res_bpp_wrong_place_mode [02:18:41] [PASSED] name_bpp_refresh [02:18:41] [PASSED] name_refresh [02:18:41] [PASSED] name_refresh_wrong_mode [02:18:41] [PASSED] name_refresh_invalid_mode [02:18:41] [PASSED] rotate_multiple [02:18:41] [PASSED] rotate_invalid_val [02:18:41] [PASSED] rotate_truncated [02:18:41] [PASSED] invalid_option [02:18:41] [PASSED] invalid_tv_option [02:18:41] [PASSED] truncated_tv_option [02:18:41] ============ [PASSED] drm_test_cmdline_invalid ============= [02:18:41] =============== drm_test_cmdline_tv_options =============== [02:18:41] [PASSED] NTSC [02:18:41] [PASSED] NTSC_443 [02:18:41] [PASSED] NTSC_J [02:18:41] [PASSED] PAL [02:18:41] [PASSED] PAL_M [02:18:41] [PASSED] PAL_N [02:18:41] [PASSED] SECAM [02:18:41] [PASSED] MONO_525 [02:18:41] [PASSED] MONO_625 [02:18:41] =========== [PASSED] drm_test_cmdline_tv_options =========== [02:18:41] =============== [PASSED] drm_cmdline_parser ================ [02:18:41] ========== drmm_connector_hdmi_init (19 subtests) ========== [02:18:41] [PASSED] drm_test_connector_hdmi_init_valid [02:18:41] [PASSED] drm_test_connector_hdmi_init_bpc_8 [02:18:41] [PASSED] drm_test_connector_hdmi_init_bpc_10 [02:18:41] [PASSED] drm_test_connector_hdmi_init_bpc_12 [02:18:41] [PASSED] drm_test_connector_hdmi_init_bpc_invalid [02:18:41] [PASSED] drm_test_connector_hdmi_init_bpc_null [02:18:41] [PASSED] drm_test_connector_hdmi_init_formats_empty [02:18:41] [PASSED] drm_test_connector_hdmi_init_formats_no_rgb [02:18:41] [PASSED] drm_test_connector_hdmi_init_null_ddc [02:18:41] [PASSED] drm_test_connector_hdmi_init_null_product [02:18:41] [PASSED] drm_test_connector_hdmi_init_null_vendor [02:18:41] [PASSED] drm_test_connector_hdmi_init_product_length_exact [02:18:41] [PASSED] drm_test_connector_hdmi_init_product_length_too_long [02:18:41] [PASSED] drm_test_connector_hdmi_init_product_valid [02:18:41] [PASSED] drm_test_connector_hdmi_init_vendor_length_exact [02:18:41] [PASSED] drm_test_connector_hdmi_init_vendor_length_too_long [02:18:41] [PASSED] drm_test_connector_hdmi_init_vendor_valid [02:18:41] ========= drm_test_connector_hdmi_init_type_valid ========= [02:18:41] [PASSED] HDMI-A [02:18:41] [PASSED] HDMI-B [02:18:41] ===== [PASSED] drm_test_connector_hdmi_init_type_valid ===== [02:18:41] ======== drm_test_connector_hdmi_init_type_invalid ======== [02:18:41] [PASSED] Unknown [02:18:41] [PASSED] VGA [02:18:41] [PASSED] DVI-I [02:18:41] [PASSED] DVI-D [02:18:41] [PASSED] DVI-A [02:18:41] [PASSED] Composite [02:18:41] [PASSED] SVIDEO [02:18:41] [PASSED] LVDS [02:18:41] [PASSED] Component [02:18:41] [PASSED] DIN [02:18:41] [PASSED] DP [02:18:41] [PASSED] TV [02:18:41] [PASSED] eDP [02:18:41] [PASSED] Virtual [02:18:41] [PASSED] DSI [02:18:41] [PASSED] DPI [02:18:41] [PASSED] Writeback [02:18:41] [PASSED] SPI [02:18:41] [PASSED] USB [02:18:41] ==== [PASSED] drm_test_connector_hdmi_init_type_invalid ==== [02:18:41] ============ [PASSED] drmm_connector_hdmi_init ============= [02:18:41] ============= drmm_connector_init (3 subtests) ============= [02:18:41] [PASSED] drm_test_drmm_connector_init [02:18:41] [PASSED] drm_test_drmm_connector_init_null_ddc [02:18:41] ========= drm_test_drmm_connector_init_type_valid ========= [02:18:41] [PASSED] Unknown [02:18:41] [PASSED] VGA [02:18:41] [PASSED] DVI-I [02:18:41] [PASSED] DVI-D [02:18:41] [PASSED] DVI-A [02:18:41] [PASSED] Composite [02:18:41] [PASSED] SVIDEO [02:18:41] [PASSED] LVDS [02:18:41] [PASSED] Component [02:18:41] [PASSED] DIN [02:18:41] [PASSED] DP [02:18:41] [PASSED] HDMI-A [02:18:41] [PASSED] HDMI-B [02:18:41] [PASSED] TV [02:18:41] [PASSED] eDP [02:18:41] [PASSED] Virtual [02:18:41] [PASSED] DSI [02:18:41] [PASSED] DPI [02:18:41] [PASSED] Writeback [02:18:41] [PASSED] SPI [02:18:41] [PASSED] USB [02:18:41] ===== [PASSED] drm_test_drmm_connector_init_type_valid ===== [02:18:41] =============== [PASSED] drmm_connector_init =============== [02:18:41] = drm_connector_attach_broadcast_rgb_property (2 subtests) = [02:18:41] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property [02:18:41] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector [02:18:41] === [PASSED] drm_connector_attach_broadcast_rgb_property === [02:18:41] ========== drm_get_tv_mode_from_name (2 subtests) ========== [02:18:41] ========== drm_test_get_tv_mode_from_name_valid =========== [02:18:41] [PASSED] NTSC [02:18:41] [PASSED] NTSC-443 [02:18:41] [PASSED] NTSC-J [02:18:41] [PASSED] PAL [02:18:41] [PASSED] PAL-M [02:18:41] [PASSED] PAL-N [02:18:41] [PASSED] SECAM [02:18:41] [PASSED] Mono [02:18:41] ====== [PASSED] drm_test_get_tv_mode_from_name_valid ======= [02:18:41] [PASSED] drm_test_get_tv_mode_from_name_truncated [02:18:41] ============ [PASSED] drm_get_tv_mode_from_name ============ [02:18:41] = drm_test_connector_hdmi_compute_mode_clock (12 subtests) = [02:18:41] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb [02:18:41] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc [02:18:41] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc_vic_1 [02:18:41] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc [02:18:41] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc_vic_1 [02:18:41] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_double [02:18:41] = drm_test_connector_hdmi_compute_mode_clock_yuv420_valid = [02:18:41] [PASSED] VIC 96 [02:18:41] [PASSED] VIC 97 [02:18:41] [PASSED] VIC 101 [02:18:41] [PASSED] VIC 102 [02:18:41] [PASSED] VIC 106 [02:18:41] [PASSED] VIC 107 [02:18:41] === [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_valid === [02:18:41] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_10_bpc [02:18:41] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_12_bpc [02:18:41] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_8_bpc [02:18:41] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_10_bpc [02:18:41] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_12_bpc [02:18:41] === [PASSED] drm_test_connector_hdmi_compute_mode_clock ==== [02:18:41] == drm_hdmi_connector_get_broadcast_rgb_name (2 subtests) == [02:18:41] === drm_test_drm_hdmi_connector_get_broadcast_rgb_name ==== [02:18:41] [PASSED] Automatic [02:18:41] [PASSED] Full [02:18:41] [PASSED] Limited 16:235 [02:18:41] === [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name === [02:18:41] [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name_invalid [02:18:41] ==== [PASSED] drm_hdmi_connector_get_broadcast_rgb_name ==== [02:18:41] == drm_hdmi_connector_get_output_format_name (2 subtests) == [02:18:41] === drm_test_drm_hdmi_connector_get_output_format_name ==== [02:18:41] [PASSED] RGB [02:18:41] [PASSED] YUV 4:2:0 [02:18:41] [PASSED] YUV 4:2:2 [02:18:41] [PASSED] YUV 4:4:4 [02:18:41] === [PASSED] drm_test_drm_hdmi_connector_get_output_format_name === [02:18:41] [PASSED] drm_test_drm_hdmi_connector_get_output_format_name_invalid [02:18:41] ==== [PASSED] drm_hdmi_connector_get_output_format_name ==== [02:18:41] ============= drm_damage_helper (21 subtests) ============== [02:18:41] [PASSED] drm_test_damage_iter_no_damage [02:18:41] [PASSED] drm_test_damage_iter_no_damage_fractional_src [02:18:41] [PASSED] drm_test_damage_iter_no_damage_src_moved [02:18:41] [PASSED] drm_test_damage_iter_no_damage_fractional_src_moved [02:18:41] [PASSED] drm_test_damage_iter_no_damage_not_visible [02:18:41] [PASSED] drm_test_damage_iter_no_damage_no_crtc [02:18:41] [PASSED] drm_test_damage_iter_no_damage_no_fb [02:18:41] [PASSED] drm_test_damage_iter_simple_damage [02:18:41] [PASSED] drm_test_damage_iter_single_damage [02:18:41] [PASSED] drm_test_damage_iter_single_damage_intersect_src [02:18:41] [PASSED] drm_test_damage_iter_single_damage_outside_src [02:18:41] [PASSED] drm_test_damage_iter_single_damage_fractional_src [02:18:41] [PASSED] drm_test_damage_iter_single_damage_intersect_fractional_src [02:18:41] [PASSED] drm_test_damage_iter_single_damage_outside_fractional_src [02:18:41] [PASSED] drm_test_damage_iter_single_damage_src_moved [02:18:41] [PASSED] drm_test_damage_iter_single_damage_fractional_src_moved [02:18:41] [PASSED] drm_test_damage_iter_damage [02:18:41] [PASSED] drm_test_damage_iter_damage_one_intersect [02:18:41] [PASSED] drm_test_damage_iter_damage_one_outside [02:18:41] [PASSED] drm_test_damage_iter_damage_src_moved [02:18:41] [PASSED] drm_test_damage_iter_damage_not_visible [02:18:41] ================ [PASSED] drm_damage_helper ================ [02:18:41] ============== drm_dp_mst_helper (3 subtests) ============== [02:18:41] ============== drm_test_dp_mst_calc_pbn_mode ============== [02:18:41] [PASSED] Clock 154000 BPP 30 DSC disabled [02:18:41] [PASSED] Clock 234000 BPP 30 DSC disabled [02:18:41] [PASSED] Clock 297000 BPP 24 DSC disabled [02:18:41] [PASSED] Clock 332880 BPP 24 DSC enabled [02:18:41] [PASSED] Clock 324540 BPP 24 DSC enabled [02:18:41] ========== [PASSED] drm_test_dp_mst_calc_pbn_mode ========== [02:18:41] ============== drm_test_dp_mst_calc_pbn_div =============== [02:18:41] [PASSED] Link rate 2000000 lane count 4 [02:18:41] [PASSED] Link rate 2000000 lane count 2 [02:18:41] [PASSED] Link rate 2000000 lane count 1 [02:18:41] [PASSED] Link rate 1350000 lane count 4 [02:18:41] [PASSED] Link rate 1350000 lane count 2 [02:18:41] [PASSED] Link rate 1350000 lane count 1 [02:18:41] [PASSED] Link rate 1000000 lane count 4 [02:18:41] [PASSED] Link rate 1000000 lane count 2 [02:18:41] [PASSED] Link rate 1000000 lane count 1 [02:18:41] [PASSED] Link rate 810000 lane count 4 [02:18:41] [PASSED] Link rate 810000 lane count 2 [02:18:41] [PASSED] Link rate 810000 lane count 1 [02:18:41] [PASSED] Link rate 540000 lane count 4 [02:18:41] [PASSED] Link rate 540000 lane count 2 [02:18:41] [PASSED] Link rate 540000 lane count 1 [02:18:41] [PASSED] Link rate 270000 lane count 4 [02:18:41] [PASSED] Link rate 270000 lane count 2 [02:18:41] [PASSED] Link rate 270000 lane count 1 [02:18:41] [PASSED] Link rate 162000 lane count 4 [02:18:41] [PASSED] Link rate 162000 lane count 2 [02:18:41] [PASSED] Link rate 162000 lane count 1 [02:18:41] ========== [PASSED] drm_test_dp_mst_calc_pbn_div =========== [02:18:41] ========= drm_test_dp_mst_sideband_msg_req_decode ========= [02:18:41] [PASSED] DP_ENUM_PATH_RESOURCES with port number [02:18:41] [PASSED] DP_POWER_UP_PHY with port number [02:18:41] [PASSED] DP_POWER_DOWN_PHY with port number [02:18:41] [PASSED] DP_ALLOCATE_PAYLOAD with SDP stream sinks [02:18:41] [PASSED] DP_ALLOCATE_PAYLOAD with port number [02:18:41] [PASSED] DP_ALLOCATE_PAYLOAD with VCPI [02:18:41] [PASSED] DP_ALLOCATE_PAYLOAD with PBN [02:18:41] [PASSED] DP_QUERY_PAYLOAD with port number [02:18:41] [PASSED] DP_QUERY_PAYLOAD with VCPI [02:18:41] [PASSED] DP_REMOTE_DPCD_READ with port number [02:18:41] [PASSED] DP_REMOTE_DPCD_READ with DPCD address [02:18:41] [PASSED] DP_REMOTE_DPCD_READ with max number of bytes [02:18:41] [PASSED] DP_REMOTE_DPCD_WRITE with port number [02:18:41] [PASSED] DP_REMOTE_DPCD_WRITE with DPCD address [02:18:41] [PASSED] DP_REMOTE_DPCD_WRITE with data array [02:18:41] [PASSED] DP_REMOTE_I2C_READ with port number [02:18:41] [PASSED] DP_REMOTE_I2C_READ with I2C device ID [02:18:41] [PASSED] DP_REMOTE_I2C_READ with transactions array [02:18:41] [PASSED] DP_REMOTE_I2C_WRITE with port number [02:18:41] [PASSED] DP_REMOTE_I2C_WRITE with I2C device ID [02:18:41] [PASSED] DP_REMOTE_I2C_WRITE with data array [02:18:41] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream ID [02:18:41] [PASSED] DP_QUERY_STREAM_ENC_STATUS with client ID [02:18:41] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream event [02:18:41] [PASSED] DP_QUERY_STREAM_ENC_STATUS with valid stream event [02:18:41] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream behavior [02:18:41] [PASSED] DP_QUERY_STREAM_ENC_STATUS with a valid stream behavior [02:18:41] ===== [PASSED] drm_test_dp_mst_sideband_msg_req_decode ===== [02:18:41] ================ [PASSED] drm_dp_mst_helper ================ [02:18:41] ================== drm_exec (7 subtests) =================== [02:18:41] [PASSED] sanitycheck [02:18:41] [PASSED] test_lock [02:18:41] [PASSED] test_lock_unlock [02:18:41] [PASSED] test_duplicates [02:18:41] [PASSED] test_prepare [02:18:41] [PASSED] test_prepare_array [02:18:41] [PASSED] test_multiple_loops [02:18:41] ==================== [PASSED] drm_exec ===================== [02:18:41] =========== drm_format_helper_test (17 subtests) =========== [02:18:41] ============== drm_test_fb_xrgb8888_to_gray8 ============== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ========== [PASSED] drm_test_fb_xrgb8888_to_gray8 ========== [02:18:41] ============= drm_test_fb_xrgb8888_to_rgb332 ============== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb332 ========== [02:18:41] ============= drm_test_fb_xrgb8888_to_rgb565 ============== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb565 ========== [02:18:41] ============ drm_test_fb_xrgb8888_to_xrgb1555 ============= [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======== [PASSED] drm_test_fb_xrgb8888_to_xrgb1555 ========= [02:18:41] ============ drm_test_fb_xrgb8888_to_argb1555 ============= [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======== [PASSED] drm_test_fb_xrgb8888_to_argb1555 ========= [02:18:41] ============ drm_test_fb_xrgb8888_to_rgba5551 ============= [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======== [PASSED] drm_test_fb_xrgb8888_to_rgba5551 ========= [02:18:41] ============= drm_test_fb_xrgb8888_to_rgb888 ============== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb888 ========== [02:18:41] ============ drm_test_fb_xrgb8888_to_argb8888 ============= [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======== [PASSED] drm_test_fb_xrgb8888_to_argb8888 ========= [02:18:41] =========== drm_test_fb_xrgb8888_to_xrgb2101010 =========== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======= [PASSED] drm_test_fb_xrgb8888_to_xrgb2101010 ======= [02:18:41] =========== drm_test_fb_xrgb8888_to_argb2101010 =========== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======= [PASSED] drm_test_fb_xrgb8888_to_argb2101010 ======= [02:18:41] ============== drm_test_fb_xrgb8888_to_mono =============== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ========== [PASSED] drm_test_fb_xrgb8888_to_mono =========== [02:18:41] ==================== drm_test_fb_swab ===================== [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ================ [PASSED] drm_test_fb_swab ================= [02:18:41] ============ drm_test_fb_xrgb8888_to_xbgr8888 ============= [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======== [PASSED] drm_test_fb_xrgb8888_to_xbgr8888 ========= [02:18:41] ============ drm_test_fb_xrgb8888_to_abgr8888 ============= [02:18:41] [PASSED] single_pixel_source_buffer [02:18:41] [PASSED] single_pixel_clip_rectangle [02:18:41] [PASSED] well_known_colors [02:18:41] [PASSED] destination_pitch [02:18:41] ======== [PASSED] drm_test_fb_xrgb8888_to_abgr8888 ========= [02:18:41] ================= drm_test_fb_clip_offset ================= [02:18:41] [PASSED] pass through [02:18:41] [PASSED] horizontal offset [02:18:41] [PASSED] vertical offset [02:18:41] [PASSED] horizontal and vertical offset [02:18:41] [PASSED] horizontal offset (custom pitch) [02:18:41] [PASSED] vertical offset (custom pitch) [02:18:41] [PASSED] horizontal and vertical offset (custom pitch) [02:18:41] ============= [PASSED] drm_test_fb_clip_offset ============= [02:18:41] ============== drm_test_fb_build_fourcc_list ============== [02:18:41] [PASSED] no native formats [02:18:41] [PASSED] XRGB8888 as native format [02:18:41] [PASSED] remove duplicates [02:18:41] [PASSED] convert alpha formats [02:18:41] [PASSED] random formats [02:18:41] ========== [PASSED] drm_test_fb_build_fourcc_list ========== [02:18:41] =================== drm_test_fb_memcpy ==================== [02:18:41] [PASSED] single_pixel_source_buffer: XR24 little-endian (0x34325258) [02:18:41] [PASSED] single_pixel_source_buffer: XRA8 little-endian (0x38415258) [02:18:41] [PASSED] single_pixel_source_buffer: YU24 little-endian (0x34325559) [02:18:41] [PASSED] single_pixel_clip_rectangle: XB24 little-endian (0x34324258) [02:18:41] [PASSED] single_pixel_clip_rectangle: XRA8 little-endian (0x38415258) [02:18:41] [PASSED] single_pixel_clip_rectangle: YU24 little-endian (0x34325559) [02:18:41] [PASSED] well_known_colors: XB24 little-endian (0x34324258) [02:18:41] [PASSED] well_known_colors: XRA8 little-endian (0x38415258) [02:18:41] [PASSED] well_known_colors: YU24 little-endian (0x34325559) [02:18:41] [PASSED] destination_pitch: XB24 little-endian (0x34324258) [02:18:41] [PASSED] destination_pitch: XRA8 little-endian (0x38415258) [02:18:41] [PASSED] destination_pitch: YU24 little-endian (0x34325559) [02:18:41] =============== [PASSED] drm_test_fb_memcpy ================ [02:18:41] ============= [PASSED] drm_format_helper_test ============== [02:18:41] ================= drm_format (18 subtests) ================= [02:18:41] [PASSED] drm_test_format_block_width_invalid [02:18:41] [PASSED] drm_test_format_block_width_one_plane [02:18:41] [PASSED] drm_test_format_block_width_two_plane [02:18:41] [PASSED] drm_test_format_block_width_three_plane [02:18:41] [PASSED] drm_test_format_block_width_tiled [02:18:41] [PASSED] drm_test_format_block_height_invalid [02:18:41] [PASSED] drm_test_format_block_height_one_plane [02:18:41] [PASSED] drm_test_format_block_height_two_plane [02:18:41] [PASSED] drm_test_format_block_height_three_plane [02:18:41] [PASSED] drm_test_format_block_height_tiled [02:18:41] [PASSED] drm_test_format_min_pitch_invalid [02:18:41] [PASSED] drm_test_format_min_pitch_one_plane_8bpp [02:18:41] [PASSED] drm_test_format_min_pitch_one_plane_16bpp [02:18:41] [PASSED] drm_test_format_min_pitch_one_plane_24bpp [02:18:41] [PASSED] drm_test_format_min_pitch_one_plane_32bpp [02:18:41] [PASSED] drm_test_format_min_pitch_two_plane [02:18:41] [PASSED] drm_test_format_min_pitch_three_plane_8bpp [02:18:41] [PASSED] drm_test_format_min_pitch_tiled [02:18:41] =================== [PASSED] drm_format ==================== [02:18:41] ============== drm_framebuffer (10 subtests) =============== [02:18:41] ========== drm_test_framebuffer_check_src_coords ========== [02:18:41] [PASSED] Success: source fits into fb [02:18:41] [PASSED] Fail: overflowing fb with x-axis coordinate [02:18:41] [PASSED] Fail: overflowing fb with y-axis coordinate [02:18:41] [PASSED] Fail: overflowing fb with source width [02:18:41] [PASSED] Fail: overflowing fb with source height [02:18:41] ====== [PASSED] drm_test_framebuffer_check_src_coords ====== [02:18:41] [PASSED] drm_test_framebuffer_cleanup [02:18:41] =============== drm_test_framebuffer_create =============== [02:18:41] [PASSED] ABGR8888 normal sizes [02:18:41] [PASSED] ABGR8888 max sizes [02:18:41] [PASSED] ABGR8888 pitch greater than min required [02:18:41] [PASSED] ABGR8888 pitch less than min required [02:18:41] [PASSED] ABGR8888 Invalid width [02:18:41] [PASSED] ABGR8888 Invalid buffer handle [02:18:41] [PASSED] No pixel format [02:18:41] [PASSED] ABGR8888 Width 0 [02:18:41] [PASSED] ABGR8888 Height 0 [02:18:41] [PASSED] ABGR8888 Out of bound height * pitch combination [02:18:41] [PASSED] ABGR8888 Large buffer offset [02:18:41] [PASSED] ABGR8888 Buffer offset for inexistent plane [02:18:41] [PASSED] ABGR8888 Invalid flag [02:18:41] [PASSED] ABGR8888 Set DRM_MODE_FB_MODIFIERS without modifiers [02:18:41] [PASSED] ABGR8888 Valid buffer modifier [02:18:41] [PASSED] ABGR8888 Invalid buffer modifier(DRM_FORMAT_MOD_SAMSUNG_64_32_TILE) [02:18:41] [PASSED] ABGR8888 Extra pitches without DRM_MODE_FB_MODIFIERS [02:18:41] [PASSED] ABGR8888 Extra pitches with DRM_MODE_FB_MODIFIERS [02:18:41] [PASSED] NV12 Normal sizes [02:18:41] [PASSED] NV12 Max sizes [02:18:41] [PASSED] NV12 Invalid pitch [02:18:41] [PASSED] NV12 Invalid modifier/missing DRM_MODE_FB_MODIFIERS flag [02:18:41] [PASSED] NV12 different modifier per-plane [02:18:41] [PASSED] NV12 with DRM_FORMAT_MOD_SAMSUNG_64_32_TILE [02:18:41] [PASSED] NV12 Valid modifiers without DRM_MODE_FB_MODIFIERS [02:18:41] [PASSED] NV12 Modifier for inexistent plane [02:18:41] [PASSED] NV12 Handle for inexistent plane [02:18:41] [PASSED] NV12 Handle for inexistent plane without DRM_MODE_FB_MODIFIERS [02:18:41] [PASSED] YVU420 DRM_MODE_FB_MODIFIERS set without modifier [02:18:41] [PASSED] YVU420 Normal sizes [02:18:41] [PASSED] YVU420 Max sizes [02:18:41] [PASSED] YVU420 Invalid pitch [02:18:41] [PASSED] YVU420 Different pitches [02:18:41] [PASSED] YVU420 Different buffer offsets/pitches [02:18:41] [PASSED] YVU420 Modifier set just for plane 0, without DRM_MODE_FB_MODIFIERS [02:18:41] [PASSED] YVU420 Modifier set just for planes 0, 1, without DRM_MODE_FB_MODIFIERS [02:18:41] [PASSED] YVU420 Modifier set just for plane 0, 1, with DRM_MODE_FB_MODIFIERS [02:18:41] [PASSED] YVU420 Valid modifier [02:18:41] [PASSED] YVU420 Different modifiers per plane [02:18:41] [PASSED] YVU420 Modifier for inexistent plane [02:18:41] [PASSED] YUV420_10BIT Invalid modifier(DRM_FORMAT_MOD_LINEAR) [02:18:41] [PASSED] X0L2 Normal sizes [02:18:41] [PASSED] X0L2 Max sizes [02:18:41] [PASSED] X0L2 Invalid pitch [02:18:41] [PASSED] X0L2 Pitch greater than minimum required [02:18:41] [PASSED] X0L2 Handle for inexistent plane [02:18:41] [PASSED] X0L2 Offset for inexistent plane, without DRM_MODE_FB_MODIFIERS set [02:18:41] [PASSED] X0L2 Modifier without DRM_MODE_FB_MODIFIERS set [02:18:41] [PASSED] X0L2 Valid modifier [02:18:41] [PASSED] X0L2 Modifier for inexistent plane [02:18:41] =========== [PASSED] drm_test_framebuffer_create =========== [02:18:41] [PASSED] drm_test_framebuffer_free [02:18:41] [PASSED] drm_test_framebuffer_init [02:18:41] [PASSED] drm_test_framebuffer_init_bad_format [02:18:41] [PASSED] drm_test_framebuffer_init_dev_mismatch [02:18:41] [PASSED] drm_test_framebuffer_lookup [02:18:41] [PASSED] drm_test_framebuffer_lookup_inexistent [02:18:41] [PASSED] drm_test_framebuffer_modifiers_not_supported [02:18:41] ================= [PASSED] drm_framebuffer ================= [02:18:41] ================ drm_gem_shmem (8 subtests) ================ [02:18:41] [PASSED] drm_gem_shmem_test_obj_create [02:18:41] [PASSED] drm_gem_shmem_test_obj_create_private [02:18:41] [PASSED] drm_gem_shmem_test_pin_pages [02:18:41] [PASSED] drm_gem_shmem_test_vmap [02:18:41] [PASSED] drm_gem_shmem_test_get_pages_sgt [02:18:41] [PASSED] drm_gem_shmem_test_get_sg_table [02:18:41] [PASSED] drm_gem_shmem_test_madvise [02:18:41] [PASSED] drm_gem_shmem_test_purge [02:18:41] ================== [PASSED] drm_gem_shmem ================== [02:18:41] === drm_atomic_helper_connector_hdmi_check (22 subtests) === [02:18:41] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode [02:18:41] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode_vic_1 [02:18:41] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode [02:18:41] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode_vic_1 [02:18:41] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode [02:18:41] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode_vic_1 [02:18:41] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_changed [02:18:41] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_not_changed [02:18:41] [PASSED] drm_test_check_hdmi_funcs_reject_rate [02:18:41] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback [02:18:41] [PASSED] drm_test_check_max_tmds_rate_format_fallback [02:18:41] [PASSED] drm_test_check_output_bpc_crtc_mode_changed [02:18:41] [PASSED] drm_test_check_output_bpc_crtc_mode_not_changed [02:18:41] [PASSED] drm_test_check_output_bpc_dvi [02:18:41] [PASSED] drm_test_check_output_bpc_format_vic_1 [02:18:41] [PASSED] drm_test_check_output_bpc_format_display_8bpc_only [02:18:41] [PASSED] drm_test_check_output_bpc_format_display_rgb_only [02:18:41] [PASSED] drm_test_check_output_bpc_format_driver_8bpc_only [02:18:41] [PASSED] drm_test_check_output_bpc_format_driver_rgb_only [02:18:41] [PASSED] drm_test_check_tmds_char_rate_rgb_8bpc [02:18:41] [PASSED] drm_test_check_tmds_char_rate_rgb_10bpc [02:18:41] [PASSED] drm_test_check_tmds_char_rate_rgb_12bpc [02:18:41] ===== [PASSED] drm_atomic_helper_connector_hdmi_check ====== [02:18:41] === drm_atomic_helper_connector_hdmi_reset (6 subtests) ==== [02:18:41] [PASSED] drm_test_check_broadcast_rgb_value [02:18:41] [PASSED] drm_test_check_bpc_8_value [02:18:41] [PASSED] drm_test_check_bpc_10_value [02:18:41] [PASSED] drm_test_check_bpc_12_value [02:18:41] [PASSED] drm_test_check_format_value [02:18:41] [PASSED] drm_test_check_tmds_char_value [02:18:41] ===== [PASSED] drm_atomic_helper_connector_hdmi_reset ====== [02:18:41] ================= drm_managed (2 subtests) ================= [02:18:41] [PASSED] drm_test_managed_release_action [02:18:41] [PASSED] drm_test_managed_run_action [02:18:41] =================== [PASSED] drm_managed =================== [02:18:41] =================== drm_mm (6 subtests) ==================== [02:18:41] [PASSED] drm_test_mm_init [02:18:41] [PASSED] drm_test_mm_debug [02:18:41] [PASSED] drm_test_mm_align32 [02:18:41] [PASSED] drm_test_mm_align64 [02:18:41] [PASSED] drm_test_mm_lowest [02:18:41] [PASSED] drm_test_mm_highest [02:18:41] ===================== [PASSED] drm_mm ====================== [02:18:41] ============= drm_modes_analog_tv (5 subtests) ============= [02:18:41] [PASSED] drm_test_modes_analog_tv_mono_576i [02:18:41] [PASSED] drm_test_modes_analog_tv_ntsc_480i [02:18:41] [PASSED] drm_test_modes_analog_tv_ntsc_480i_inlined [02:18:41] [PASSED] drm_test_modes_analog_tv_pal_576i [02:18:41] [PASSED] drm_test_modes_analog_tv_pal_576i_inlined [02:18:41] =============== [PASSED] drm_modes_analog_tv =============== stty: 'standard input': Inappropriate ioctl for device [02:18:41] ============== drm_plane_helper (2 subtests) =============== [02:18:41] =============== drm_test_check_plane_state ================ [02:18:41] [PASSED] clipping_simple [02:18:41] [PASSED] clipping_rotate_reflect [02:18:41] [PASSED] positioning_simple [02:18:41] [PASSED] upscaling [02:18:41] [PASSED] downscaling [02:18:41] [PASSED] rounding1 [02:18:41] [PASSED] rounding2 [02:18:41] [PASSED] rounding3 [02:18:41] [PASSED] rounding4 [02:18:41] =========== [PASSED] drm_test_check_plane_state ============ [02:18:41] =========== drm_test_check_invalid_plane_state ============ [02:18:41] [PASSED] positioning_invalid [02:18:41] [PASSED] upscaling_invalid [02:18:41] [PASSED] downscaling_invalid [02:18:41] ======= [PASSED] drm_test_check_invalid_plane_state ======== [02:18:41] ================ [PASSED] drm_plane_helper ================= [02:18:41] ====== drm_connector_helper_tv_get_modes (1 subtest) ======= [02:18:41] ====== drm_test_connector_helper_tv_get_modes_check ======= [02:18:41] [PASSED] None [02:18:41] [PASSED] PAL [02:18:41] [PASSED] NTSC [02:18:41] [PASSED] Both, NTSC Default [02:18:41] [PASSED] Both, PAL Default [02:18:41] [PASSED] Both, NTSC Default, with PAL on command-line [02:18:41] [PASSED] Both, PAL Default, with NTSC on command-line [02:18:41] == [PASSED] drm_test_connector_helper_tv_get_modes_check === [02:18:41] ======== [PASSED] drm_connector_helper_tv_get_modes ======== [02:18:41] ================== drm_rect (9 subtests) =================== [02:18:41] [PASSED] drm_test_rect_clip_scaled_div_by_zero [02:18:41] [PASSED] drm_test_rect_clip_scaled_not_clipped [02:18:41] [PASSED] drm_test_rect_clip_scaled_clipped [02:18:41] [PASSED] drm_test_rect_clip_scaled_signed_vs_unsigned [02:18:41] ================= drm_test_rect_intersect ================= [02:18:41] [PASSED] top-left x bottom-right: 2x2+1+1 x 2x2+0+0 [02:18:41] [PASSED] top-right x bottom-left: 2x2+0+0 x 2x2+1-1 [02:18:41] [PASSED] bottom-left x top-right: 2x2+1-1 x 2x2+0+0 [02:18:41] [PASSED] bottom-right x top-left: 2x2+0+0 x 2x2+1+1 [02:18:41] [PASSED] right x left: 2x1+0+0 x 3x1+1+0 [02:18:41] [PASSED] left x right: 3x1+1+0 x 2x1+0+0 [02:18:41] [PASSED] up x bottom: 1x2+0+0 x 1x3+0-1 [02:18:41] [PASSED] bottom x up: 1x3+0-1 x 1x2+0+0 [02:18:41] [PASSED] touching corner: 1x1+0+0 x 2x2+1+1 [02:18:41] [PASSED] touching side: 1x1+0+0 x 1x1+1+0 [02:18:41] [PASSED] equal rects: 2x2+0+0 x 2x2+0+0 [02:18:41] [PASSED] inside another: 2x2+0+0 x 1x1+1+1 [02:18:41] [PASSED] far away: 1x1+0+0 x 1x1+3+6 [02:18:41] [PASSED] points intersecting: 0x0+5+10 x 0x0+5+10 [02:18:41] [PASSED] points not intersecting: 0x0+0+0 x 0x0+5+10 [02:18:41] ============= [PASSED] drm_test_rect_intersect ============= [02:18:41] ================ drm_test_rect_calc_hscale ================ [02:18:41] [PASSED] normal use [02:18:41] [PASSED] out of max range [02:18:41] [PASSED] out of min range [02:18:41] [PASSED] zero dst [02:18:41] [PASSED] negative src [02:18:41] [PASSED] negative dst [02:18:41] ============ [PASSED] drm_test_rect_calc_hscale ============ [02:18:41] ================ drm_test_rect_calc_vscale ================ [02:18:41] [PASSED] normal use [02:18:41] [PASSED] out of max range [02:18:41] [PASSED] out of min range [02:18:41] [PASSED] zero dst [02:18:41] [PASSED] negative src [02:18:41] [PASSED] negative dst [02:18:41] ============ [PASSED] drm_test_rect_calc_vscale ============ [02:18:41] ================== drm_test_rect_rotate =================== [02:18:41] [PASSED] reflect-x [02:18:41] [PASSED] reflect-y [02:18:41] [PASSED] rotate-0 [02:18:41] [PASSED] rotate-90 [02:18:41] [PASSED] rotate-180 [02:18:41] [PASSED] rotate-270 [02:18:41] ============== [PASSED] drm_test_rect_rotate =============== [02:18:41] ================ drm_test_rect_rotate_inv ================= [02:18:41] [PASSED] reflect-x [02:18:41] [PASSED] reflect-y [02:18:41] [PASSED] rotate-0 [02:18:41] [PASSED] rotate-90 [02:18:41] [PASSED] rotate-180 [02:18:41] [PASSED] rotate-270 [02:18:41] ============ [PASSED] drm_test_rect_rotate_inv ============= [02:18:41] ==================== [PASSED] drm_rect ===================== [02:18:41] ============================================================ [02:18:41] Testing complete. Ran 526 tests: passed: 526 [02:18:41] Elapsed time: 24.250s total, 1.616s configuring, 22.465s building, 0.168s running
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/ttm/tests/.kunitconfig [02:18:41] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig [02:18:43] Building KUnit Kernel ... Populating config with: $ make ARCH=um O=.kunit olddefconfig Building with: $ make all compile_commands.json ARCH=um O=.kunit --jobs=48 [02:18:51] Starting KUnit Kernel (1/1)... [02:18:51] ============================================================ Running tests with: $ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt [02:18:51] ================= ttm_device (5 subtests) ================== [02:18:51] [PASSED] ttm_device_init_basic [02:18:51] [PASSED] ttm_device_init_multiple [02:18:51] [PASSED] ttm_device_fini_basic [02:18:51] [PASSED] ttm_device_init_no_vma_man [02:18:51] ================== ttm_device_init_pools ================== [02:18:51] [PASSED] No DMA allocations, no DMA32 required [02:18:51] [PASSED] DMA allocations, DMA32 required [02:18:51] [PASSED] No DMA allocations, DMA32 required [02:18:51] [PASSED] DMA allocations, no DMA32 required [02:18:51] ============== [PASSED] ttm_device_init_pools ============== [02:18:51] =================== [PASSED] ttm_device ==================== [02:18:51] ================== ttm_pool (8 subtests) =================== [02:18:51] ================== ttm_pool_alloc_basic =================== [02:18:51] [PASSED] One page [02:18:51] [PASSED] More than one page [02:18:51] [PASSED] Above the allocation limit [02:18:51] [PASSED] One page, with coherent DMA mappings enabled [02:18:51] [PASSED] Above the allocation limit, with coherent DMA mappings enabled [02:18:51] ============== [PASSED] ttm_pool_alloc_basic =============== [02:18:51] ============== ttm_pool_alloc_basic_dma_addr ============== [02:18:51] [PASSED] One page [02:18:51] [PASSED] More than one page [02:18:51] [PASSED] Above the allocation limit [02:18:51] [PASSED] One page, with coherent DMA mappings enabled [02:18:51] [PASSED] Above the allocation limit, with coherent DMA mappings enabled [02:18:51] ========== [PASSED] ttm_pool_alloc_basic_dma_addr ========== [02:18:51] [PASSED] ttm_pool_alloc_order_caching_match [02:18:51] [PASSED] ttm_pool_alloc_caching_mismatch [02:18:51] [PASSED] ttm_pool_alloc_order_mismatch [02:18:51] [PASSED] ttm_pool_free_dma_alloc [02:18:51] [PASSED] ttm_pool_free_no_dma_alloc [02:18:51] [PASSED] ttm_pool_fini_basic [02:18:51] ==================== [PASSED] ttm_pool ===================== [02:18:51] ================ ttm_resource (8 subtests) ================= [02:18:51] ================= ttm_resource_init_basic ================= [02:18:51] [PASSED] Init resource in TTM_PL_SYSTEM [02:18:51] [PASSED] Init resource in TTM_PL_VRAM [02:18:51] [PASSED] Init resource in a private placement [02:18:51] [PASSED] Init resource in TTM_PL_SYSTEM, set placement flags [02:18:51] ============= [PASSED] ttm_resource_init_basic ============= [02:18:51] [PASSED] ttm_resource_init_pinned [02:18:51] [PASSED] ttm_resource_fini_basic [02:18:51] [PASSED] ttm_resource_manager_init_basic [02:18:51] [PASSED] ttm_resource_manager_usage_basic [02:18:51] [PASSED] ttm_resource_manager_set_used_basic [02:18:51] [PASSED] ttm_sys_man_alloc_basic [02:18:51] [PASSED] ttm_sys_man_free_basic [02:18:51] ================== [PASSED] ttm_resource =================== [02:18:51] =================== ttm_tt (15 subtests) =================== [02:18:51] ==================== ttm_tt_init_basic ==================== [02:18:51] [PASSED] Page-aligned size [02:18:51] [PASSED] Extra pages requested [02:18:51] ================ [PASSED] ttm_tt_init_basic ================ [02:18:51] [PASSED] ttm_tt_init_misaligned [02:18:51] [PASSED] ttm_tt_fini_basic [02:18:51] [PASSED] ttm_tt_fini_sg [02:18:51] [PASSED] ttm_tt_fini_shmem [02:18:51] [PASSED] ttm_tt_create_basic [02:18:51] [PASSED] ttm_tt_create_invalid_bo_type [02:18:51] [PASSED] ttm_tt_create_ttm_exists [02:18:51] [PASSED] ttm_tt_create_failed [02:18:51] [PASSED] ttm_tt_destroy_basic [02:18:51] [PASSED] ttm_tt_populate_null_ttm [02:18:51] [PASSED] ttm_tt_populate_populated_ttm [02:18:51] [PASSED] ttm_tt_unpopulate_basic [02:18:51] [PASSED] ttm_tt_unpopulate_empty_ttm [02:18:51] [PASSED] ttm_tt_swapin_basic [02:18:51] ===================== [PASSED] ttm_tt ====================== [02:18:51] =================== ttm_bo (14 subtests) =================== [02:18:51] =========== ttm_bo_reserve_optimistic_no_ticket =========== [02:18:51] [PASSED] Cannot be interrupted and sleeps [02:18:51] [PASSED] Cannot be interrupted, locks straight away [02:18:51] [PASSED] Can be interrupted, sleeps [02:18:51] ======= [PASSED] ttm_bo_reserve_optimistic_no_ticket ======= [02:18:51] [PASSED] ttm_bo_reserve_locked_no_sleep [02:18:51] [PASSED] ttm_bo_reserve_no_wait_ticket [02:18:51] [PASSED] ttm_bo_reserve_double_resv [02:18:51] [PASSED] ttm_bo_reserve_interrupted [02:18:51] [PASSED] ttm_bo_reserve_deadlock [02:18:51] [PASSED] ttm_bo_unreserve_basic [02:18:51] [PASSED] ttm_bo_unreserve_pinned [02:18:51] [PASSED] ttm_bo_unreserve_bulk [02:18:51] [PASSED] ttm_bo_put_basic [02:18:51] [PASSED] ttm_bo_put_shared_resv [02:18:51] [PASSED] ttm_bo_pin_basic [02:18:51] [PASSED] ttm_bo_pin_unpin_resource [02:18:51] [PASSED] ttm_bo_multiple_pin_one_unpin [02:18:51] ===================== [PASSED] ttm_bo ====================== [02:18:51] ============== ttm_bo_validate (22 subtests) =============== [02:18:51] ============== ttm_bo_init_reserved_sys_man =============== [02:18:51] [PASSED] Buffer object for userspace [02:18:51] [PASSED] Kernel buffer object [02:18:51] [PASSED] Shared buffer object [02:18:51] ========== [PASSED] ttm_bo_init_reserved_sys_man =========== [02:18:51] ============== ttm_bo_init_reserved_mock_man ============== [02:18:51] [PASSED] Buffer object for userspace [02:18:51] [PASSED] Kernel buffer object [02:18:51] [PASSED] Shared buffer object [02:18:51] ========== [PASSED] ttm_bo_init_reserved_mock_man ========== [02:18:51] [PASSED] ttm_bo_init_reserved_resv [02:18:51] ================== ttm_bo_validate_basic ================== [02:18:51] [PASSED] Buffer object for userspace [02:18:51] [PASSED] Kernel buffer object [02:18:51] [PASSED] Shared buffer object [02:18:51] ============== [PASSED] ttm_bo_validate_basic ============== [02:18:51] [PASSED] ttm_bo_validate_invalid_placement [02:18:51] ============= ttm_bo_validate_same_placement ============== [02:18:51] [PASSED] System manager [02:18:51] [PASSED] VRAM manager [02:18:51] ========= [PASSED] ttm_bo_validate_same_placement ========== [02:18:51] [PASSED] ttm_bo_validate_failed_alloc [02:18:51] [PASSED] ttm_bo_validate_pinned [02:18:51] [PASSED] ttm_bo_validate_busy_placement [02:18:51] ================ ttm_bo_validate_multihop ================= [02:18:51] [PASSED] Buffer object for userspace [02:18:51] [PASSED] Kernel buffer object [02:18:51] [PASSED] Shared buffer object [02:18:51] ============ [PASSED] ttm_bo_validate_multihop ============= [02:18:51] ========== ttm_bo_validate_no_placement_signaled ========== [02:18:51] [PASSED] Buffer object in system domain, no page vector [02:18:51] [PASSED] Buffer object in system domain with an existing page vector [02:18:51] ====== [PASSED] ttm_bo_validate_no_placement_signaled ====== [02:18:51] ======== ttm_bo_validate_no_placement_not_signaled ======== [02:18:51] [PASSED] Buffer object for userspace [02:18:51] [PASSED] Kernel buffer object [02:18:51] [PASSED] Shared buffer object [02:18:51] ==== [PASSED] ttm_bo_validate_no_placement_not_signaled ==== [02:18:51] [PASSED] ttm_bo_validate_move_fence_signaled [02:18:51] ========= ttm_bo_validate_move_fence_not_signaled ========= [02:18:51] [PASSED] Waits for GPU [02:18:51] [PASSED] Tries to lock straight away [02:18:51] ===== [PASSED] ttm_bo_validate_move_fence_not_signaled ===== [02:18:51] [PASSED] ttm_bo_validate_swapout [02:18:51] [PASSED] ttm_bo_validate_happy_evict [02:18:51] [PASSED] ttm_bo_validate_all_pinned_evict [02:18:51] [PASSED] ttm_bo_validate_allowed_only_evict [02:18:51] [PASSED] ttm_bo_validate_deleted_evict [02:18:51] [PASSED] ttm_bo_validate_busy_domain_evict [02:18:51] [PASSED] ttm_bo_validate_evict_gutting [02:18:51] [PASSED] ttm_bo_validate_recrusive_evict stty: 'standard input': Inappropriate ioctl for device [02:18:51] ================= [PASSED] ttm_bo_validate ================= [02:18:51] ============================================================ [02:18:51] Testing complete. Ran 102 tests: passed: 102 [02:18:51] Elapsed time: 9.973s total, 1.612s configuring, 7.744s building, 0.535s running
+ cleanup
++ stat -c %u:%g /kernel
+ chown -R 1003:1003 /kernel
Patchwork
CI✓ CI.Build: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
In reply to Tomasz Lis== Series Details ==
== Series Details ==
Series: drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
URL : https://patchwork.freedesktop.org/series/141439/
State : success
== Summary ==
lib/modules/6.12.0-rc7-xe/kernel/arch/x86/events/rapl.ko lib/modules/6.12.0-rc7-xe/kernel/arch/x86/kvm/ lib/modules/6.12.0-rc7-xe/kernel/arch/x86/kvm/kvm.ko lib/modules/6.12.0-rc7-xe/kernel/arch/x86/kvm/kvm-intel.ko lib/modules/6.12.0-rc7-xe/kernel/arch/x86/kvm/kvm-amd.ko lib/modules/6.12.0-rc7-xe/kernel/kernel/ lib/modules/6.12.0-rc7-xe/kernel/kernel/kheaders.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/ lib/modules/6.12.0-rc7-xe/kernel/crypto/ecrdsa_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/xcbc.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/serpent_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/aria_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/crypto_simd.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/adiantum.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/tcrypt.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/crypto_engine.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/zstd.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/asymmetric_keys/ lib/modules/6.12.0-rc7-xe/kernel/crypto/asymmetric_keys/pkcs7_test_key.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/asymmetric_keys/pkcs8_key_parser.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/des_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/xctr.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/authenc.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/sm4_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/keywrap.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/camellia_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/sm3.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/pcrypt.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/aegis128.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/af_alg.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/algif_aead.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/cmac.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/sm3_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/aes_ti.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/chacha_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/poly1305_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/nhpoly1305.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/crc32_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/essiv.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/ccm.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/wp512.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/streebog_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/authencesn.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/echainiv.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/lrw.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/cryptd.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/crypto_user.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/algif_hash.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/vmac.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/polyval-generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/hctr2.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/842.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/pcbc.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/ansi_cprng.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/cast6_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/twofish_common.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/twofish_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/lz4hc.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/blowfish_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/md4.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/chacha20poly1305.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/curve25519-generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/lz4.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/rmd160.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/algif_skcipher.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/cast5_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/fcrypt.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/ecdsa_generic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/sm4.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/cast_common.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/blowfish_common.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/michael_mic.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/async_tx/ lib/modules/6.12.0-rc7-xe/kernel/crypto/async_tx/async_xor.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/async_tx/async_tx.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/async_tx/async_memcpy.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/async_tx/async_pq.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/async_tx/async_raid6_recov.ko lib/modules/6.12.0-rc7-xe/kernel/crypto/algif_rng.ko lib/modules/6.12.0-rc7-xe/kernel/block/ lib/modules/6.12.0-rc7-xe/kernel/block/bfq.ko lib/modules/6.12.0-rc7-xe/kernel/block/kyber-iosched.ko lib/modules/6.12.0-rc7-xe/build lib/modules/6.12.0-rc7-xe/modules.alias.bin lib/modules/6.12.0-rc7-xe/modules.builtin lib/modules/6.12.0-rc7-xe/modules.softdep lib/modules/6.12.0-rc7-xe/modules.alias lib/modules/6.12.0-rc7-xe/modules.order lib/modules/6.12.0-rc7-xe/modules.symbols lib/modules/6.12.0-rc7-xe/modules.dep.bin
+ mv kernel-nodebug.tar.gz ..
+ cd ..
+ rm -rf archive
++ date +%s
+ echo -e '\e[0Ksection_end:1731724592:package_x86_64_nodebug\r\e[0K'
+ sync
[0Ksection_end:1731724592:package_x86_64_nodebug
[0K
+ cleanup
++ stat -c %u:%g /kernel
+ chown -R 1003:1003 /kernel
Patchwork
CI✗ CI.Hooks: failure for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
In reply to Tomasz Lis== Series Details ==
== Series Details ==
Series: drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
URL : https://patchwork.freedesktop.org/series/141439/
State : failure
== Summary ==
run-parts: executing /workspace/ci/hooks/00-showenv
+ export
+ grep -Ei '(^|\W)CI_'
declare -x CI_KERNEL_BUILD_DIR="/workspace/kernel/build64-default" declare -x CI_KERNEL_SRC_DIR="/workspace/kernel" declare -x CI_TOOLS_SRC_DIR="/workspace/ci"
declare -x CI_WORKSPACE_DIR="/workspace"
run-parts: executing /workspace/ci/hooks/10-build-W1
+ SRC_DIR=/workspace/kernel
+ RESTORE_DISPLAY_CONFIG=0
+ '[' -n /workspace/kernel/build64-default ']'
+ BUILD_DIR=/workspace/kernel/build64-default
+ cd /workspace/kernel
++ nproc
+ make -j48 O=/workspace/kernel/build64-default modules_prepare make[1]: Entering directory '/workspace/kernel/build64-default'
GEN Makefile UPD include/config/kernel.release UPD include/generated/utsrelease.h mkdir -p /workspace/kernel/build64-default/tools/objtool && make O=/workspace/kernel/build64-default subdir=tools/objtool --no-print-directory -C objtool CALL ../scripts/checksyscalls.sh INSTALL libsubcmd_headers CC /workspace/kernel/build64-default/tools/objtool/libsubcmd/exec-cmd.o CC /workspace/kernel/build64-default/tools/objtool/libsubcmd/help.o CC /workspace/kernel/build64-default/tools/objtool/libsubcmd/pager.o CC /workspace/kernel/build64-default/tools/objtool/libsubcmd/parse-options.o CC /workspace/kernel/build64-default/tools/objtool/libsubcmd/run-command.o CC /workspace/kernel/build64-default/tools/objtool/libsubcmd/sigchain.o CC /workspace/kernel/build64-default/tools/objtool/libsubcmd/subcmd-config.o LD /workspace/kernel/build64-default/tools/objtool/libsubcmd/libsubcmd-in.o AR /workspace/kernel/build64-default/tools/objtool/libsubcmd/libsubcmd.a CC /workspace/kernel/build64-default/tools/objtool/weak.o CC /workspace/kernel/build64-default/tools/objtool/check.o CC /workspace/kernel/build64-default/tools/objtool/special.o CC /workspace/kernel/build64-default/tools/objtool/builtin-check.o CC /workspace/kernel/build64-default/tools/objtool/elf.o CC /workspace/kernel/build64-default/tools/objtool/objtool.o CC /workspace/kernel/build64-default/tools/objtool/orc_gen.o CC /workspace/kernel/build64-default/tools/objtool/orc_dump.o CC /workspace/kernel/build64-default/tools/objtool/arch/x86/special.o CC /workspace/kernel/build64-default/tools/objtool/libstring.o CC /workspace/kernel/build64-default/tools/objtool/libctype.o CC /workspace/kernel/build64-default/tools/objtool/str_error_r.o CC /workspace/kernel/build64-default/tools/objtool/arch/x86/decode.o CC /workspace/kernel/build64-default/tools/objtool/librbtree.o CC /workspace/kernel/build64-default/tools/objtool/arch/x86/orc.o LD /workspace/kernel/build64-default/tools/objtool/arch/x86/objtool-in.o LD /workspace/kernel/build64-default/tools/objtool/objtool-in.o LINK /workspace/kernel/build64-default/tools/objtool/objtool
make[1]: Leaving directory '/workspace/kernel/build64-default' ++ nproc
+ make -j48 O=/workspace/kernel/build64-default W=1 drivers/gpu/drm/xe make[1]: Entering directory '/workspace/kernel/build64-default' make[2]: Nothing to be done for 'drivers/gpu/drm/xe'.
make[1]: Leaving directory '/workspace/kernel/build64-default'
run-parts: executing /workspace/ci/hooks/11-build-32b
+++ realpath /workspace/ci/hooks/11-build-32b
++ dirname /workspace/ci/hooks/11-build-32b
+ THIS_SCRIPT_DIR=/workspace/ci/hooks
+ SRC_DIR=/workspace/kernel
+ TOOLS_SRC_DIR=/workspace/ci
+ '[' -n /workspace/kernel/build64-default ']'
+ BUILD_DIR=/workspace/kernel/build64-default
+ BUILD_DIR=/workspace/kernel/build64-default/build32
+ cd /workspace/kernel
+ mkdir -p /workspace/kernel/build64-default/build32
++ nproc
+ make -j48 ARCH=i386 O=/workspace/kernel/build64-default/build32 defconfig make[1]: Entering directory '/workspace/kernel/build64-default/build32'
GEN Makefile HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/confdata.o HOSTCC scripts/kconfig/expr.o LEX scripts/kconfig/lexer.lex.c YACC scripts/kconfig/parser.tab.[ch] HOSTCC scripts/kconfig/menu.o HOSTCC scripts/kconfig/preprocess.o HOSTCC scripts/kconfig/symbol.o HOSTCC scripts/kconfig/util.o HOSTCC scripts/kconfig/lexer.lex.o HOSTCC scripts/kconfig/parser.tab.o HOSTLD scripts/kconfig/conf *** Default configuration is based on 'i386_defconfig' # # configuration written to .config # make[1]: Leaving directory '/workspace/kernel/build64-default/build32' + cd /workspace/kernel/build64-default/build32 + /workspace/kernel/scripts/kconfig/merge_config.sh .config /workspace/ci/kernel/10-xe.fragment Using .config as base Merging /workspace/ci/kernel/10-xe.fragment The merge file '/workspace/ci/kernel/10-xe.fragment' does not exist. Exit. run-parts: /workspace/ci/hooks/11-build-32b exited with return code 1
Patchwork
CI✗ CI.checksparse: warning for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
In reply to Tomasz Lis== Series Details ==
== Series Details ==
Series: drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
URL : https://patchwork.freedesktop.org/series/141439/
State : warning
== Summary ==
+ trap cleanup EXIT
+ KERNEL=/kernel
+ MT=/root/linux/maintainer-tools
+ git clone https://gitlab.freedesktop.org/drm/maintainer-tools /root/linux/maintainer-tools Cloning into '/root/linux/maintainer-tools'...
warning: redirecting to https://gitlab.freedesktop.org/drm/maintainer-tools.git/
+ make -C /root/linux/maintainer-tools
make: Entering directory '/root/linux/maintainer-tools'
cc -O2 -g -Wextra -o remap-log remap-log.c
make: Leaving directory '/root/linux/maintainer-tools'
+ cd /kernel
+ git config --global --add safe.directory /kernel
+ /root/linux/maintainer-tools/dim sparse --fast 9a7388467f79fb74c67a2444c5b1add91652f89e /root/linux/maintainer-tools/dim: line 2068: sparse: command not found
Sparse version:
Fast mode used, each commit won't be checked separately.
+ cleanup
++ stat -c %u:%g /kernel
+ chown -R 1003:1003 /kernel
Patchwork
CI✓ CI.BAT: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
In reply to Tomasz Lis== Series Details ==
== Series Details ==
Series: drm/xe/vf: Post-migration recovery of GGTT nodes and CTB (rev2)
URL : https://patchwork.freedesktop.org/series/141439/
State : success
== Summary ==
CI Bug Log - changes from xe-2242-9a7388467f79fb74c67a2444c5b1add91652f89e_BAT -> xe-pw-141439v2_BAT
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Participating hosts (9 -> 9)
------------------------------
No changes in participating hosts
Known issues
------------
Here are the changes found in xe-pw-141439v2_BAT that come from known issues:
### IGT changes ###
#### Possible fixes ####
* igt@kms_frontbuffer_tracking@basic:
- bat-adlp-7: [DMESG-FAIL][1] ([Intel XE#1033]) -> [PASS][2]
[1]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-2242-9a7388467f79fb74c67a2444c5b1add91652f89e/bat-adlp-7/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-141439v2/bat-adlp-7/igt@[email protected]
[Intel XE#1033]: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1033
Build changes
-------------
* Linux: xe-2242-9a7388467f79fb74c67a2444c5b1add91652f89e -> xe-pw-141439v2
IGT_8114: 8114
xe-2242-9a7388467f79fb74c67a2444c5b1add91652f89e: 9a7388467f79fb74c67a2444c5b1add91652f89e
xe-pw-141439v2: 141439v2
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/xe-pw-141439v2/index.html