Bluetooth: SCO: Add support for 16 bits transparent voice setting
Subsystems (2)
PATCH v2 1/1 Bluetooth: SCO: Add support for 16 bits transparent voice setting
The voice setting is used by sco_connect() or sco_conn_defer_accept() after being set by sco_sock_setsockopt().
The BCM4349B1 supports 16 bits transparent data on its I2S port. If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
---
v1 -> v2: Enhance commit message
include/net/bluetooth/bluetooth.h | 1 + net/bluetooth/sco.c | 7 +++++-- 2 files changed, 6 insertions(+), 2 deletions(-)
include/net/bluetooth/bluetooth.h +1 -0
@@ -123,6 +123,7 @@ struct bt_voice {#define BT_VOICE_TRANSPARENT 0x0003#define BT_VOICE_CVSD_16BIT 0x0060 +#define BT_VOICE_TRANSPARENT_16BIT 0x0063#define BT_SNDMTU 12#define BT_RCVMTU 13
net/bluetooth/sco.c +5 -2
@@ -319,7 +319,8 @@ static int sco_connect(struct sock *sk)else type =SCO_LINK ; -if (sco_pi (sk)->setting ==BT_VOICE_TRANSPARENT && +if ((sco_pi (sk)->setting ==BT_VOICE_TRANSPARENT || +sco_pi (sk)->setting ==BT_VOICE_TRANSPARENT_16BIT ) && (!lmp_transp_capable (hdev) || !lmp_esco_capable (hdev))) { err = -EOPNOTSUPP ; goto unlock;
@@ -922,6 +923,7 @@ static int sco_sock_setsockopt(struct socket *sock, int level, int optname,/* Explicitly check for these values */ if (voice.setting !=BT_VOICE_TRANSPARENT && + voice.setting !=BT_VOICE_TRANSPARENT_16BIT && voice.setting !=BT_VOICE_CVSD_16BIT ) { err = -EINVAL ;break ;
@@ -935,7 +937,8 @@ static int sco_sock_setsockopt(struct socket *sock, int level, int optname,break ; }if (enhanced_sync_conn_capable (hdev) && - voice.setting ==BT_VOICE_TRANSPARENT ) + (voice.setting ==BT_VOICE_TRANSPARENT || + voice.setting ==BT_VOICE_TRANSPARENT_16BIT ))sco_pi (sk)->codec.id =BT_CODEC_TRANSPARENT ;hci_dev_put (hdev);break ;
Signature · 1 line
2.34.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=910540
---Test result---
Test Summary:
CheckPatch PENDING 0.29 seconds GitLint PENDING 0.19 seconds SubjectPrefix PASS 0.12 seconds BuildKernel PASS 24.81 seconds CheckAllWarning PASS 26.93 seconds CheckSparse WARNING 30.19 seconds BuildKernel32 PASS 24.36 seconds TestRunnerSetup PASS 434.33 seconds TestRunner_l2cap-tester PASS 20.42 seconds TestRunner_iso-tester FAIL 30.49 seconds TestRunner_bnep-tester PASS 4.77 seconds TestRunner_mgmt-tester PASS 118.06 seconds TestRunner_rfcomm-tester PASS 7.62 seconds TestRunner_sco-tester PASS 11.36 seconds TestRunner_ioctl-tester PASS 8.14 seconds TestRunner_mesh-tester PASS 6.40 seconds TestRunner_smp-tester PASS 6.98 seconds TestRunner_userchan-tester PASS 5.12 seconds IncrementalBuild PENDING 0.73 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:net/bluetooth/sco.c: note: in included file:./include/net/bluetooth/hci_core.h:147:35: warning: array of flexible structures
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
Total: 124, Passed: 120 (96.8%), Failed: 0, Not Run: 4
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:
---
Regards,
Linux Bluetooth