Change ghes driver to use HEST-based offsets
cover Change ghes driver to use HEST-based offsets
This series was part of the previous PR to add generic error injection support on GHES. It depends on a cleanup patch series sent yesterday:
It contains the changes of the math used to calculate offsets at HEST table and hardware_error firmware file. It prepares for the addition of GHES error injection.
The first patch was previously at the cleanup series. It prepares the logic to support multiple sources.
The second patch adds a new firmware file to store HEST address.
The third patch use the new firmware to calculate offsets using HEST table.
Patches 4 and 5 add migration support. They assume that this series will be merged for qemu 9.2 (maybe it is too late for that, as QEMU is now on soft freeze).
I tested migration using both virt-9.1 and virt-9.2 machines on qemu 9.2.
I also tested migration with:
qemu-9.1 -M virt-9.1 -cpu cortex-a57 => qemu-9.2 -M virt-9.1 -cpu cortex-a57 qemu-9.2 -M virt-9.1 -cpu cortex-a57 => qemu-9.1 -M virt-9.1 -cpu cortex-a57
Mauro Carvalho Chehab (6):
acpi/ghes: Prepare to support multiple sources on ghes acpi/ghes: add a firmware file with HEST address acpi/ghes: rename the function which gets hw error offsets acpi/ghes: Use HEST table offsets when preparing GHES records acpi/generic_event_device: Update GHES migration to cover hest addr acpi/generic_event_device: add logic to detect if HEST addr is
available
hw/acpi/generic_event_device.c | 30 +++++++ hw/acpi/ghes.c | 158 +++++++++++++++++++++++++++++---- hw/arm/virt-acpi-build.c | 33 ++++++- hw/core/machine.c | 2 + include/hw/acpi/ghes.h | 23 +++-- 5 files changed, 217 insertions(+), 29 deletions(-)
Signature · 1 line
2.47.0
PATCH 1/6 acpi/ghes: Prepare to support multiple sources on ghes
The current code is actually dependent on having just one error structure with a single source.
As the number of sources should be arch-dependent, as it will depend on what kind of synchronous/assynchronous notifications will exist, change the logic to dynamically build the table.
Yet, for a proper support, we need to get the number of sources by reading the number from the HEST table. However, bios currently doesn't store a pointer to it.
For now just change the logic at table build time, while enforcing that it will behave like before with a single source ID.
A future patch will add a HEST table bios pointer and change the logic at acpi_ghes_record_errors() to dynamically use the new size.
--- hw/acpi/ghes.c | 43 ++++++++++++++++++++++++++-------------- hw/arm/virt-acpi-build.c | 5 +++++ include/hw/acpi/ghes.h | 21 +++++++++++++------- 3 files changed, 47 insertions(+), 22 deletions(-)
hw/acpi/ghes.c +28 -15
@@ -212,17 +212,26 @@ ghes_gen_err_data_uncorrectable_recoverable(GArray *block,* Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs. * See docs/specs/acpi_hest_ghes.rst for blobs format. */ -static void build_ghes_error_table (GArray *hardware_errors,BIOSLinker *linker) +static void build_ghes_error_table (GArray *hardware_errors,BIOSLinker *linker, +int num_sources) {int i, error_status_block_offset; +/* +* TODO: Current version supports only one source. +* A further patch will drop this check, after adding a proper migration +* code, as, for the code to work, we need to store a bios pointer to the +* HEST table. +*/ +assert (num_sources ==1 ); +/* Build error_block_address */ -for (i =0 ; i <ACPI_GHES_ERROR_SOURCE_COUNT ; i++) { +for (i =0 ; i < num_sources; i++) {build_append_int_noprefix (hardware_errors,0 ,sizeof (uint64_t )); }/* Build read_ack_register */ -for (i =0 ; i <ACPI_GHES_ERROR_SOURCE_COUNT ; i++) { +for (i =0 ; i < num_sources; i++) {/* * Initialize the value of read_ack_register to 1, so GHES can be * writable after (re)boot.
@@ -237,13 +246,13 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)/* Reserve space for Error Status Data Block */ acpi_data_push (hardware_errors, -ACPI_GHES_MAX_RAW_DATA_LENGTH *ACPI_GHES_ERROR_SOURCE_COUNT ); +ACPI_GHES_MAX_RAW_DATA_LENGTH * num_sources);/* Tell guest firmware to place hardware_errors blob into RAM */ bios_linker_loader_alloc (linker,ACPI_HW_ERROR_FW_CFG_FILE , hardware_errors,sizeof (uint64_t ), false); -for (i =0 ; i <ACPI_GHES_ERROR_SOURCE_COUNT ; i++) { +for (i =0 ; i < num_sources; i++) {/* * Tell firmware to patch error_block_address entries to point to * corresponding "Generic Error Status Block"
@@ -269,10 +278,12 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)/* Build Generic Hardware Error Source version 2 (GHESv2) */ static void build_ghes_v2 (GArray *table_data,BIOSLinker *linker, -enum AcpiGhesNotifyType notify, -uint16_t source_id) +const AcpiNotificationSourceId *notif_src, +uint16_t index,int num_sources) {uint64_t address_offset; +const uint16_t notify = notif_src->notify; +const uint16_t source_id = notif_src->source_id;/* * Type:
@@ -303,7 +314,7 @@ static void build_ghes_v2(GArray *table_data, address_offset +GAS_ADDR_OFFSET ,sizeof (uint64_t ),ACPI_HW_ERROR_FW_CFG_FILE , - source_id * sizeof(uint64_t)); + index * sizeof(uint64_t));/* Notification Structure */ build_ghes_hw_error_notification (table_data, notify);
@@ -323,8 +334,7 @@ static void build_ghes_v2(GArray *table_data, address_offset +GAS_ADDR_OFFSET ,sizeof (uint64_t ),ACPI_HW_ERROR_FW_CFG_FILE , - (ACPI_GHES_ERROR_SOURCE_COUNT + source_id) - * sizeof(uint64_t)); + (num_sources + index) * sizeof(uint64_t));/* * Read Ack Preserve field
@@ -339,19 +349,23 @@ static void build_ghes_v2(GArray *table_data,/* Build Hardware Error Source Table */ void acpi_build_hest (GArray *table_data,GArray *hardware_errors,BIOSLinker *linker, +const AcpiNotificationSourceId *const notif_source, +int num_sources,const char *oem_id,const char *oem_table_id) {AcpiTable table = { .sig ="HEST" , .rev =1 , .oem_id = oem_id, .oem_table_id = oem_table_id }; +int i; -build_ghes_error_table (hardware_errors, linker); +build_ghes_error_table (hardware_errors, linker, num_sources);acpi_table_begin (&table, table_data);/* Error Source Count */ -build_append_int_noprefix (table_data,ACPI_GHES_ERROR_SOURCE_COUNT ,4 ); -build_ghes_v2 (table_data, linker, -ACPI_GHES_NOTIFY_SEA ,ACPI_HEST_SRC_ID_SEA ); +build_append_int_noprefix (table_data, num_sources,4 ); +for (i =0 ; i < num_sources; i++) { +build_ghes_v2 (table_data, linker, ¬if_source[i], i, num_sources); + }acpi_table_end (linker, &table); }
@@ -416,7 +430,6 @@ void ghes_record_cper_errors(const void *cper, size_t len, } ags = &acpi_ged_state->ghes_state; -assert (ACPI_GHES_ERROR_SOURCE_COUNT ==1 );get_ghes_offsets (le64_to_cpu (ags->hw_error_le), &cper_addr, &read_ack_register_addr); cper_addr =le64_to_cpu (cper_addr);
hw/arm/virt-acpi-build.c +5 -0
@@ -889,6 +889,10 @@ static void acpi_align_size(GArray *blob, unsigned align)g_array_set_size (blob,ROUND_UP (acpi_data_len (blob), align)); } +static const AcpiNotificationSourceId hest_ghes_notify[] = { + {ACPI_HEST_SRC_ID_SYNC ,ACPI_GHES_NOTIFY_SEA }, +}; +static void virt_acpi_build (VirtMachineState *vms,AcpiBuildTables *tables) {
@@ -944,6 +948,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)if (vms->ras) {acpi_add_table (table_offsets, tables_blob);acpi_build_hest (tables_blob, tables->hardware_errors, tables->linker, + hest_ghes_notify,ARRAY_SIZE (hest_ghes_notify), vms->oem_id, vms->oem_table_id); }
include/hw/acpi/ghes.h +14 -7
@@ -57,20 +57,27 @@ enum AcpiGhesNotifyType { ACPI_GHES_NOTIFY_RESERVED = 12 }; -enum { -ACPI_HEST_SRC_ID_SEA =0 , -/* future ids go here */ - -ACPI_GHES_ERROR_SOURCE_COUNT -}; -typedef struct AcpiGhesState {uint64_t hw_error_le;bool present;/* True if GHES is present at all on this board */ }AcpiGhesState ; +/* +* ID numbers used to fill HEST source ID field +*/ +enum AcpiGhesSourceID { +ACPI_HEST_SRC_ID_SYNC , +}; + +typedef struct AcpiNotificationSourceId { +enum AcpiGhesSourceID source_id; +enum AcpiGhesNotifyType notify; +}AcpiNotificationSourceId ; +void acpi_build_hest (GArray *table_data,GArray *hardware_errors,BIOSLinker *linker, +const AcpiNotificationSourceId *const notif_source, +int num_sources,const char *oem_id,const char *oem_table_id);void acpi_ghes_add_fw_cfg (AcpiGhesState *vms,FWCfgState *s,GArray *hardware_errors);
Signature · 1 line
2.47.0
Re: [PATCH 1/6] acpi/ghes: Prepare to support multiple sources on ghes
Quoted 2 lines · On Wed, 13 Nov 2024 09:36:58 +0100 Mauro Carvalho Chehab…
The current code is actually dependent on having just one error structure with a single source.
Trivial: Very short line wrap of the description. Maybe more than 60 chars?
Quoted 14 lines
As the number of sources should be arch-dependent, as it will depend on what kind of synchronous/assynchronous notifications will exist, change the logic to dynamically build the table.
Yet, for a proper support, we need to get the number of sources by reading the number from the HEST table. However, bios currently doesn't store a pointer to it.
For now just change the logic at table build time, while enforcing that it will behave like before with a single source ID.
Quoted 6 lines
A future patch will add a HEST table bios pointer and change the logic at
acpi_ghes_record_errors()to dynamically use the new size.Signed-off-by Mauro Carvalho Chehab <[email protected]>Reviewed-by Jonathan Cameron <[email protected]>
Took a fresh look. One trivial comment.
hw/arm/virt-acpi-build.c static void acpi_align_size(GArray *blob, unsigned align) · line 893
Quoted 10 lines
hw/arm/virt-acpi-build.c +2
-0@@ -889,6 +889,10 @@ static void acpi_align_size(GArray *blob, unsigned align)g_array_set_size (blob,ROUND_UP (acpi_data_len (blob), align)); } +static const AcpiNotificationSourceId hest_ghes_notify[] = { + {ACPI_HEST_SRC_ID_SYNC ,ACPI_GHES_NOTIFY_SEA },
{ ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA },
seems to be local style.
Quoted 12 lines
hw/arm/virt-acpi-build.c +3
-0+}; +static void virt_acpi_build (VirtMachineState *vms,AcpiBuildTables *tables) {@@ -944,6 +948,7 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)if (vms->ras) {acpi_add_table (table_offsets, tables_blob);acpi_build_hest (tables_blob, tables->hardware_errors, tables->linker, + hest_ghes_notify,ARRAY_SIZE (hest_ghes_notify), vms->oem_id, vms->oem_table_id); }
PATCH 2/6 acpi/ghes: add a firmware file with HEST address
In reply to Mauro Carvalho ChehabStore HEST table address at GPA, placing its content at hest_addr_le variable.
---
Change from v8:
- hest_addr_lr is now pointing to the error source size and data.
--- hw/acpi/ghes.c | 15 +++++++++++++++ include/hw/acpi/ghes.h | 1 + 2 files changed, 16 insertions(+)
hw/acpi/ghes.c +15 -0
@@ -30,6 +30,7 @@#define ACPI_HW_ERROR_FW_CFG_FILE "etc/hardware_errors"#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" +#define ACPI_HEST_ADDR_FW_CFG_FILE "etc/acpi_table_hest_addr"/* The max size in bytes for one error block */ #define ACPI_GHES_MAX_RAW_DATA_LENGTH (1 * KiB)
@@ -361,6 +362,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,acpi_table_begin (&table, table_data); +int hest_offset = table_data->len; +/* Error Source Count */ build_append_int_noprefix (table_data, num_sources,4 );for (i =0 ; i < num_sources; i++) {
@@ -368,6 +371,15 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors, }acpi_table_end (linker, &table); + +/* +* tell firmware to write into GPA the address of HEST via fw_cfg, +* once initialized. +*/ +bios_linker_loader_write_pointer (linker, +ACPI_HEST_ADDR_FW_CFG_FILE ,0 , +sizeof (uint64_t ), +ACPI_BUILD_TABLE_FILE , hest_offset); } void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
@@ -381,6 +393,9 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,fw_cfg_add_file_callback (s,ACPI_HW_ERROR_ADDR_FW_CFG_FILE ,NULL ,NULL ,NULL , &(ags->hw_error_le),sizeof (ags->hw_error_le), false); +fw_cfg_add_file_callback (s,ACPI_HEST_ADDR_FW_CFG_FILE ,NULL ,NULL , +NULL , &(ags->hest_addr_le),sizeof (ags->hest_addr_le), false); + ags->present = true; }
include/hw/acpi/ghes.h +1 -0
@@ -58,6 +58,7 @@ enum AcpiGhesNotifyType { };typedef struct AcpiGhesState { +uint64_t hest_addr_le;uint64_t hw_error_le;bool present;/* True if GHES is present at all on this board */ }AcpiGhesState ;
Signature · 1 line
2.47.0
Re: [PATCH 2/6] acpi/ghes: add a firmware file with HEST address
Quoted 11 lines · On Wed, 13 Nov 2024 09:36:59 +0100 Mauro Carvalho Chehab…
Store HEST table address at GPA, placing its content at
hest_addr_levariable.Signed-off-by Mauro Carvalho Chehab <[email protected]>---
Change from v8:
-hest_addr_lris now pointing to the error source size and data.Signed-off-by Mauro Carvalho Chehab <[email protected]>
Drop the extra SoB. Doesn't matter really but looks strange in the patch.
One trivial inline.
This stuff always gives me a headache, so with that in mind, looks fine to me.
Quoted 27 lines
--- hw/acpi/ghes.c | 15 +++++++++++++++ include/hw/acpi/ghes.h | 1 + 2 files changed, 16 insertions(+)hw/acpi/ghes.c +3
-0@@ -30,6 +30,7 @@#define ACPI_HW_ERROR_FW_CFG_FILE "etc/hardware_errors"#define ACPI_HW_ERROR_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" +#define ACPI_HEST_ADDR_FW_CFG_FILE "etc/acpi_table_hest_addr"/* The max size in bytes for one error block */ #define ACPI_GHES_MAX_RAW_DATA_LENGTH (1 * KiB)@@ -361,6 +362,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,acpi_table_begin (&table, table_data); +int hest_offset = table_data->len; +/* Error Source Count */ build_append_int_noprefix (table_data, num_sources,4 );for (i =0 ; i < num_sources; i++) {
hw/acpi/ghes.c void acpi_build_hest(GArray *table_data, GArray *hardware_errors, · line 376
Quoted 6 lines
hw/acpi/ghes.c +3
-0@@ -368,6 +371,15 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors, }acpi_table_end (linker, &table); + +/* +* tell firmware to write into GPA the address of HEST via fw_cfg,
Tell
File is inconsistent but mostly uses a capital to start.
hw/acpi/ghes.c void acpi_build_hest(GArray *table_data, GArray *hardware_errors, · line 383
Quoted 7 lines
hw/acpi/ghes.c +6
-0+* once initialized. +*/ +bios_linker_loader_write_pointer (linker, +ACPI_HEST_ADDR_FW_CFG_FILE ,0 , +sizeof (uint64_t ), +ACPI_BUILD_TABLE_FILE , hest_offset); }
esState;
PATCH 3/6 acpi/ghes: rename the function which gets hw error offsets
In reply to Mauro Carvalho ChehabRename: get_ghes_offsets->get_hw_error_offsets
to make clear that this function return offsets based on the hardware error firmware.
--- hw/acpi/ghes.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
hw/acpi/ghes.c +5 -4
@@ -399,9 +399,9 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s, ags->present = true; } -static void get_ghes_offsets (uint64_t ghes_addr, -uint64_t *cper_addr, -uint64_t *read_ack_register_addr) +static void get_hw_error_offsets (uint64_t ghes_addr, +uint64_t *cper_addr, +uint64_t *read_ack_register_addr) {if (!ghes_addr) {return ;
@@ -445,7 +445,8 @@ void ghes_record_cper_errors(const void *cper, size_t len, } ags = &acpi_ged_state->ghes_state; -get_ghes_offsets (le64_to_cpu (ags->hw_error_le), &cper_addr, &read_ack_register_addr); +get_hw_error_offsets (le64_to_cpu (ags->hw_error_le), + &cper_addr, &read_ack_register_addr); cper_addr =le64_to_cpu (cper_addr);if (!cper_addr) {
Signature · 1 line
2.47.0
Re: [PATCH 3/6] acpi/ghes: rename the function which gets hw error offsets
Quoted 5 lines · On Wed, 13 Nov 2024 09:37:00 +0100 Mauro Carvalho Chehab…
Rename:
get_ghes_offsets->get_hw_error_offsets
to make clear that this function return offsets based on the hardware error firmware.Signed-off-by Mauro Carvalho Chehab <[email protected]>
Re: [PATCH 3/6] acpi/ghes: rename the function which gets hw error offsets
Em Wed, 20 Nov 2024 14:33:08 +0000
Jonathan Cameron <[email protected]> escreveu:
Quoted 9 lines
Quoted 5 lines · On Wed, 13 Nov 2024 09:37:00 +0100 Mauro Carvalho Chehab…
Rename:
get_ghes_offsets->get_hw_error_offsets
to make clear that this function return offsets based on the hardware error firmware.Signed-off-by Mauro Carvalho Chehab <[email protected]>Reviewed-by Jonathan Cameron <[email protected]>
As there were changes at the cleanup series, I ended merging this one there on patch 13/15:
https://lore.kernel.org/qemu-devel/e5661a6383449675b28e15c8479ebca42c939368.1732266152.git.mchehab+huawei@kernel.org/T/#u
Thanks,
Mauro
PATCH 4/6 acpi/ghes: Use HEST table offsets when preparing GHES records
In reply to Mauro Carvalho ChehabThere are two pointers that are needed during error injection:
1. The start address of the CPER block to be stored;
2. The address of the ack, which needs a reset before next error.
Calculate them preferrable from the HEST table, as this allows checking the source ID, the size of the table and the type of HEST error block structures.
Yet, keep the old code, as this is needed for migration purposes.
--- hw/acpi/ghes.c | 98 ++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 88 insertions(+), 10 deletions(-)
hw/acpi/ghes.c +88 -10
@@ -61,6 +61,23 @@*/ #define ACPI_GHES_GESB_SIZE 20 +/* +* Offsets with regards to the start of the HEST table stored at +* ags->hest_addr_le, according with the memory layout map at +* docs/specs/acpi_hest_ghes.rst. +*/ + +/* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2 +* Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure +*/ +#define HEST_GHES_V2_TABLE_SIZE 92 +#define GHES_ACK_OFFSET (64 + GAS_ADDR_OFFSET) + +/* ACPI 6.2: 18.3.2.7: Generic Hardware Error Source +* Table 18-380: 'Error Status Address' field +*/ +#define GHES_ERR_ST_ADDR_OFFSET (20 + GAS_ADDR_OFFSET) +/* * Values for error_severity field */
@@ -218,14 +235,6 @@ static void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker, {int i, error_status_block_offset; -/* -* TODO: Current version supports only one source. -* A further patch will drop this check, after adding a proper migration -* code, as, for the code to work, we need to store a bios pointer to the -* HEST table. -*/ -assert (num_sources ==1 ); -/* Build error_block_address */ for (i =0 ; i < num_sources; i++) {build_append_int_noprefix (hardware_errors,0 ,sizeof (uint64_t ));
@@ -425,6 +434,70 @@ static void get_hw_error_offsets(uint64_t ghes_addr, *read_ack_register_addr = ghes_addr +sizeof (uint64_t ); } +static void get_ghes_source_offsets (uint16_t source_id,uint64_t hest_addr, +uint64_t *cper_addr, +uint64_t *read_ack_start_addr, +Error **errp) +{ +uint64_t hest_err_block_addr, hest_read_ack_addr; +uint64_t err_source_struct, error_block_addr; +uint32_t num_sources, i; + +if (!hest_addr) { +return ; + } + +cpu_physical_memory_read (hest_addr, &num_sources,sizeof (num_sources)); + num_sources =le32_to_cpu (num_sources); + + err_source_struct = hest_addr +sizeof (num_sources); + +/* +* Currently, HEST Error source navigates only for GHESv2 tables +*/ + +for (i =0 ; i < num_sources; i++) { +uint64_t addr = err_source_struct; +uint16_t type, src_id; + +cpu_physical_memory_read (addr, &type,sizeof (type)); + type =le16_to_cpu (type); + +/* For now, we only know the size of GHESv2 table */ +if (type !=ACPI_GHES_SOURCE_GENERIC_ERROR_V2 ) { +error_setg (errp,"HEST: type %d not supported." , type); +return ; + } + +/* It is GHES. Compare CPER source address */ + addr +=sizeof (type); +cpu_physical_memory_read (addr, &src_id,sizeof (src_id)); + +if (src_id == source_id) { +break ; + } + + err_source_struct +=HEST_GHES_V2_TABLE_SIZE ; + } +if (i == num_sources) { +error_setg (errp,"HEST: Source %d not found." , source_id); +return ; + } + +/* Navigate though table address pointers */ + hest_err_block_addr = err_source_struct +GHES_ERR_ST_ADDR_OFFSET ; + hest_read_ack_addr = err_source_struct +GHES_ACK_OFFSET ; + +cpu_physical_memory_read (hest_err_block_addr, &error_block_addr, +sizeof (error_block_addr)); + +cpu_physical_memory_read (error_block_addr, cper_addr, +sizeof (*cper_addr)); + +cpu_physical_memory_read (hest_read_ack_addr, read_ack_start_addr, +sizeof (*read_ack_start_addr)); +} +void ghes_record_cper_errors (const void *cper,size_t len,uint16_t source_id,Error **errp) {
@@ -445,8 +518,13 @@ void ghes_record_cper_errors(const void *cper, size_t len, } ags = &acpi_ged_state->ghes_state; -get_hw_error_offsets (le64_to_cpu (ags->hw_error_le), - &cper_addr, &read_ack_register_addr); +if (!ags->hest_addr_le) { +get_hw_error_offsets (le64_to_cpu (ags->hw_error_le), + &cper_addr, &read_ack_register_addr); + }else { +get_ghes_source_offsets (source_id,le64_to_cpu (ags->hest_addr_le), + &cper_addr, &read_ack_register_addr, errp); + } cper_addr =le64_to_cpu (cper_addr);if (!cper_addr) {
Signature · 1 line
2.47.0
Re: [PATCH 4/6] acpi/ghes: Use HEST table offsets when preparing GHES records
Quoted 8 lines · On Wed, 13 Nov 2024 09:37:01 +0100 Mauro Carvalho Chehab…
There are two pointers that are needed during error injection:
1. The start address of the CPER block to be stored;
2. The address of the ack, which needs a reset before next error.Calculate them preferrable from the HEST table, as this allows checking the source ID, the size of the table and the type of HEST error block structures.
It is preferable to calculate them from the HEST table. This allows checking the source ID, the size of the table and the type of the HEST error block structures.
A few comments inline.
Jonathan
Quoted 13 lines
Yet, keep the old code, as this is needed for migration purposes.
Signed-off-by Mauro Carvalho Chehab <[email protected]>--- hw/acpi/ghes.c | 98 ++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 88 insertions(+), 10 deletions(-)hw/acpi/ghes.c +0
-0
hw/acpi/ghes.c line 69
Quoted 9 lines
hw/acpi/ghes.c +6
-0@@ -61,6 +61,23 @@*/ #define ACPI_GHES_GESB_SIZE 20 +/* +* Offsets with regards to the start of the HEST table stored at +* ags->hest_addr_le, according with the memory layout map at +* docs/specs/acpi_hest_ghes.rst. +*/ +
/*
* ACPI 6.2:
to be consistent with local style.
hw/acpi/ghes.c line 75
Quoted 6 lines
hw/acpi/ghes.c +6
-0+/* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2 +* Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure +*/ +#define HEST_GHES_V2_TABLE_SIZE 92 +#define GHES_ACK_OFFSET (64 + GAS_ADDR_OFFSET) +
/*
* ACPI 6.2:
Quoted 4 lines
hw/acpi/ghes.c +3
-0+/* ACPI 6.2: 18.3.2.7: Generic Hardware Error Source +* Table 18-380: 'Error Status Address' field +*/
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 446
Quoted 10 lines
hw/acpi/ghes.c +10
-0+static void get_ghes_source_offsets (uint16_t source_id,uint64_t hest_addr, +uint64_t *cper_addr, +uint64_t *read_ack_start_addr, +Error **errp) +{ +uint64_t hest_err_block_addr, hest_read_ack_addr; +uint64_t err_source_struct, error_block_addr; +uint32_t num_sources, i; + +if (!hest_addr) {
Trivial but I wonder if this should be named to indicate that it sin't the start of HEST but the first bit of the header.hest_body_address or something like that maybe? I don't care that much though if you prefer to keep as is.
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 457
Quoted 11 lines
hw/acpi/ghes.c +11
-0+return ; + } + +cpu_physical_memory_read (hest_addr, &num_sources,sizeof (num_sources)); + num_sources =le32_to_cpu (num_sources); + + err_source_struct = hest_addr +sizeof (num_sources); + +/* +* Currently, HEST Error source navigates only for GHESv2 tables +*/
Feels like duplication of the comment below where the type check is. Maybe drop this one?
Quoted 5 lines
hw/acpi/ghes.c +5
-0+ +for (i =0 ; i < num_sources; i++) { +uint64_t addr = err_source_struct; +uint16_t type, src_id; +
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 472
Quoted 10 lines
hw/acpi/ghes.c +10
-0+cpu_physical_memory_read (addr, &type,sizeof (type)); + type =le16_to_cpu (type); + +/* For now, we only know the size of GHESv2 table */ +if (type !=ACPI_GHES_SOURCE_GENERIC_ERROR_V2 ) { +error_setg (errp,"HEST: type %d not supported." , type); +return ; + } + +/* It is GHES. Compare CPER source address */
It's GHESv2 (of course this bit is the same, but none the less comment is misleading). I'd just go with
/* Compare CPER source address */
Quoted 11 lines
hw/acpi/ghes.c +11
-0+ addr +=sizeof (type); +cpu_physical_memory_read (addr, &src_id,sizeof (src_id)); + +if (src_id == source_id) { +break ; + } + + err_source_struct +=HEST_GHES_V2_TABLE_SIZE ; + } +if (i == num_sources) { +error_setg (errp,"HEST: Source %d not found." , source_id);
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 492
Quoted 10 lines
hw/acpi/ghes.c +9
-0+return ; + } + +/* Navigate though table address pointers */ + hest_err_block_addr = err_source_struct +GHES_ERR_ST_ADDR_OFFSET ; + hest_read_ack_addr = err_source_struct +GHES_ACK_OFFSET ; + +cpu_physical_memory_read (hest_err_block_addr, &error_block_addr, +sizeof (error_block_addr));
So this points to a registers
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 495
Quoted 3 lines
hw/acpi/ghes.c +3
-0+ +cpu_physical_memory_read (error_block_addr, cper_addr, +sizeof (*cper_addr));
and this reads the register. I'm not sure the spec defines the contents of that register to be constant. Maybe we should avoid reading the register here and do it instead at read of the record? I 'think' you could in theory use different storage for the CPER depending on other unhandled errors or whatever else meant you didn't want a fixed location.
Or maybe just add a comment to say that the location of CPER storage is fixed.
Quoted 4 lines
hw/acpi/ghes.c +4
-0+ +cpu_physical_memory_read (hest_read_ack_addr, read_ack_start_addr, +sizeof (*read_ack_start_addr)); +}
Re: [PATCH 4/6] acpi/ghes: Use HEST table offsets when preparing GHES records
Em Wed, 20 Nov 2024 14:59:30 +0000
Jonathan Cameron <[email protected]> escreveu:
Quoted 46 lines
Quoted 8 lines · On Wed, 13 Nov 2024 09:37:01 +0100 Mauro Carvalho Chehab…
There are two pointers that are needed during error injection:
1. The start address of the CPER block to be stored;
2. The address of the ack, which needs a reset before next error.Calculate them preferrable from the HEST table, as this allows checking the source ID, the size of the table and the type of HEST error block structures.
It is preferable to calculate them from the HEST table. This allows checking the source ID, the size of the table and the type of the HEST error block structures.
A few comments inline.
Jonathan
Quoted 13 lines
Yet, keep the old code, as this is needed for migration purposes.
Signed-off-by Mauro Carvalho Chehab <[email protected]>--- hw/acpi/ghes.c | 98 ++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 88 insertions(+), 10 deletions(-)hw/acpi/ghes.c +0
-0hw/acpi/ghes.c line 69
Quoted 9 lines
hw/acpi/ghes.c +6
-0@@ -61,6 +61,23 @@*/ #define ACPI_GHES_GESB_SIZE 20 +/* +* Offsets with regards to the start of the HEST table stored at +* ags->hest_addr_le, according with the memory layout map at +* docs/specs/acpi_hest_ghes.rst. +*/ +/*
* ACPI 6.2:
Quoted 1 line
to be consistent with local style.
Actually, the local style inside this file was preserved. See, before this series we have:
$ git grep "ACPI " hw/acpi/ghes.c hw/acpi/ghes.c: * ACPI 6.1/6.2: 18.3.2.7.1 Generic Error Data, hw/acpi/ghes.c: * ACPI 6.2: 18.3.2.7.1 Generic Error Data, hw/acpi/ghes.c: * ACPI 4.0: 17.3.2.7 Hardware Error Notification hw/acpi/ghes.c: * ACPI 6.1: 18.3.2.7.1 Generic Error Data hw/acpi/ghes.c: * ACPI 6.1: 18.3.2.7.1 Generic Error Data hw/acpi/ghes.c: /* invalid fru id: ACPI 4.0: 17.3.2.6.1 Generic Error Data, hw/acpi/ghes.c: * ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2 hw/acpi/ghes.c: * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source
Quoted 13 lines
hw/acpi/ghes.c line 75
Quoted 7 lines
hw/acpi/ghes.c +6
-0+/* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2 +* Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure +*/ +#define HEST_GHES_V2_TABLE_SIZE 92 +#define GHES_ACK_OFFSET (64 + GAS_ADDR_OFFSET) +/*
* ACPI 6.2:Quoted 3 lines
hw/acpi/ghes.c +3
-0+/* ACPI 6.2: 18.3.2.7: Generic Hardware Error Source +* Table 18-380: 'Error Status Address' field +*/
Quoted 15 lines
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 446
Quoted 10 lines
hw/acpi/ghes.c +10
-0+static void get_ghes_source_offsets (uint16_t source_id,uint64_t hest_addr, +uint64_t *cper_addr, +uint64_t *read_ack_start_addr, +Error **errp) +{ +uint64_t hest_err_block_addr, hest_read_ack_addr; +uint64_t err_source_struct, error_block_addr; +uint32_t num_sources, i; + +if (!hest_addr) {Trivial but I wonder if this should be named to indicate that it sin't the start of HEST but the first bit of the header.
hest_body_addressor something like that maybe? I don't care that much though if you prefer to keep as is.
I prefer to keep a simple name here, so let's keep as is.
Quoted 16 lines
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 457
Quoted 13 lines
hw/acpi/ghes.c +11
-0+return ; + } + +cpu_physical_memory_read (hest_addr, &num_sources,sizeof (num_sources)); + num_sources =le32_to_cpu (num_sources); + + err_source_struct = hest_addr +sizeof (num_sources); + +/* +* Currently, HEST Error source navigates only for GHESv2 tables +*/ Feels like duplication of the comment below where the type check is. Maybe drop this one?
If I recall correctly [1], Igor asked to place such comment, on one of the past versions of this code.
IMO, placing it clearly there helps to identify what needs to change when support for non-GHES tables is needed.
[1] this is the 12th version of this code - my memory is starting to fail to remind were exactly each change was requested.
Quoted 19 lines
Quoted 6 lines
hw/acpi/ghes.c +5
-0+ +for (i =0 ; i < num_sources; i++) { +uint64_t addr = err_source_struct; +uint16_t type, src_id; +hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 472
Quoted 10 lines
hw/acpi/ghes.c +10
-0+cpu_physical_memory_read (addr, &type,sizeof (type)); + type =le16_to_cpu (type); + +/* For now, we only know the size of GHESv2 table */ +if (type !=ACPI_GHES_SOURCE_GENERIC_ERROR_V2 ) { +error_setg (errp,"HEST: type %d not supported." , type); +return ; + } + +/* It is GHES. Compare CPER source address */ It's GHESv2 (of course this bit is the same, but none the less comment is misleading). I'd just go with
Quoted 1 line
/* Compare CPER source address */
I changed it to:
/* Compare CPER source address at the GHESv2 structure */
to better state what is there. IMO, it is important to let it clear, as, with:
ACPI 6.5: 18.3.2.11. Error Source Structure Header (Type 12 Onward)
what happens if that, if type <= 11, the struct is:
offset 0: type
offset 2: source ID
When type >= 12, the structure changes to:
offset 0: type
offset 2: Error Source Structure Length
As ACPI 6.5 doesn't define type 12, we don't know yet where source ID will be placed.
Quoted 33 lines
Quoted 12 lines
hw/acpi/ghes.c +11
-0+ addr +=sizeof (type); +cpu_physical_memory_read (addr, &src_id,sizeof (src_id)); + +if (src_id == source_id) { +break ; + } + + err_source_struct +=HEST_GHES_V2_TABLE_SIZE ; + } +if (i == num_sources) { +error_setg (errp,"HEST: Source %d not found." , source_id);hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 492
Quoted 10 lines
hw/acpi/ghes.c +9
-0+return ; + } + +/* Navigate though table address pointers */ + hest_err_block_addr = err_source_struct +GHES_ERR_ST_ADDR_OFFSET ; + hest_read_ack_addr = err_source_struct +GHES_ACK_OFFSET ; + +cpu_physical_memory_read (hest_err_block_addr, &error_block_addr, +sizeof (error_block_addr));So this points to a registers
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 495
Quoted 3 lines
hw/acpi/ghes.c +3
-0+ +cpu_physical_memory_read (error_block_addr, cper_addr, +sizeof (*cper_addr));and this reads the register. I'm not sure the spec defines the contents of that register to be constant. Maybe we should avoid reading the register here and do it instead at read of the record? I 'think' you could in theory use different storage for the CPER depending on other unhandled errors or whatever else meant you didn't want a fixed location.
Quoted 2 lines
Or maybe just add a comment to say that the location of CPER storage is fixed.
Sorry, but I missed your point. The actual offset of the error block address is defined when fw_cfg callback is called. When this happens, this function is called:
void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
GArray *hardware_error)
{
/* Create a read-only fw_cfg file for GHES */
fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
hardware_error->len);
/* Create a read-write fw_cfg file for Address */
fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
fw_cfg_add_file_callback(s, ACPI_HEST_ADDR_FW_CFG_FILE, NULL, NULL,
NULL, &(ags->hest_addr_le), sizeof(ags->hest_addr_le), false);
ags->present = true;
}The other calls for fw_cfg functions ensure the offset of the memory read inside the hardware_error firmware and this never changes, as such offsets are defined when the hardware_firmware is built at build_ghes_error_table() function. This will only change if such function is called again, which would, in turn, make acpi_ghes_add_fw_cfg() be called again.
In any case, no matter if build_ghes_error_table()/acpi_ghes_add_fw_cfg() is called only once or multiple times [1], at the time get_ghes_source_offsets() is called, such offsets are stable.
[1] On some tests I did adding printks, the GHES build logic and the callbacks are called twice - both before loading OSPM.
If migration is used, I suspect that it will be called again during migration but before starting OSPM. Again, when get_ghes_source_offsets() is called, the offsets are fixed.
Thanks,
Mauro
Re: [PATCH 4/6] acpi/ghes: Use HEST table offsets when preparing GHES records
Quoted 27 lines
Quoted 27 lines
Quoted 15 lines
Yet, keep the old code, as this is needed for migration purposes.
Signed-off-by Mauro Carvalho Chehab <[email protected]>--- hw/acpi/ghes.c | 98 ++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 88 insertions(+), 10 deletions(-)hw/acpi/ghes.c +0
-0hw/acpi/ghes.c line 69
Quoted 9 lines
hw/acpi/ghes.c +6
-0@@ -61,6 +61,23 @@*/ #define ACPI_GHES_GESB_SIZE 20 +/* +* Offsets with regards to the start of the HEST table stored at +* ags->hest_addr_le, according with the memory layout map at +* docs/specs/acpi_hest_ghes.rst. +*/ +/*
* ACPI 6.2:
Quoted 4 lines
Quoted 1 line
to be consistent with local style.
Actually, the local style inside this file was preserved. See, before this series we have:
Ah. That's me being lazy and unclear :(
What I meant was
/*
* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
So open the comment with a blank line.
Quoted 30 lines
$ git grep "ACPI " hw/acpi/ghes.c hw/acpi/ghes.c: * ACPI 6.1/6.2: 18.3.2.7.1 Generic Error Data, hw/acpi/ghes.c: * ACPI 6.2: 18.3.2.7.1 Generic Error Data, hw/acpi/ghes.c: * ACPI 4.0: 17.3.2.7 Hardware Error Notification hw/acpi/ghes.c: * ACPI 6.1: 18.3.2.7.1 Generic Error Data hw/acpi/ghes.c: * ACPI 6.1: 18.3.2.7.1 Generic Error Data hw/acpi/ghes.c: /* invalid fru id: ACPI 4.0: 17.3.2.6.1 Generic Error Data, hw/acpi/ghes.c: * ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2 hw/acpi/ghes.c: * ACPI 6.1: 18.3.2.8 Generic Hardware Error SourceQuoted 4 lines
Quoted 14 lines
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 457
Quoted 11 lines
hw/acpi/ghes.c +11
-0+return ; + } + +cpu_physical_memory_read (hest_addr, &num_sources,sizeof (num_sources)); + num_sources =le32_to_cpu (num_sources); + + err_source_struct = hest_addr +sizeof (num_sources); + +/* +* Currently, HEST Error source navigates only for GHESv2 tables +*/ Feels like duplication of the comment below where the type check is. Maybe drop this one?
Quoted 8 lines
If I recall correctly [1], Igor asked to place such comment, on one of the past versions of this code.
IMO, placing it clearly there helps to identify what needs to change when support for non-GHES tables is needed.
[1] this is the 12th version of this code - my memory is starting to fail to remind were exactly each change was requested.
Me too! :)
Quoted 40 lines
Quoted 33 lines
Quoted 12 lines
hw/acpi/ghes.c +11
-0+ addr +=sizeof (type); +cpu_physical_memory_read (addr, &src_id,sizeof (src_id)); + +if (src_id == source_id) { +break ; + } + + err_source_struct +=HEST_GHES_V2_TABLE_SIZE ; + } +if (i == num_sources) { +error_setg (errp,"HEST: Source %d not found." , source_id);hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 492
Quoted 10 lines
hw/acpi/ghes.c +9
-0+return ; + } + +/* Navigate though table address pointers */ + hest_err_block_addr = err_source_struct +GHES_ERR_ST_ADDR_OFFSET ; + hest_read_ack_addr = err_source_struct +GHES_ACK_OFFSET ; + +cpu_physical_memory_read (hest_err_block_addr, &error_block_addr, +sizeof (error_block_addr));So this points to a registers
hw/acpi/ghes.c static void get_hw_error_offsets(uint64_t ghes_addr, · line 495
Quoted 3 lines
hw/acpi/ghes.c +3
-0+ +cpu_physical_memory_read (error_block_addr, cper_addr, +sizeof (*cper_addr));and this reads the register. I'm not sure the spec defines the contents of that register to be constant. Maybe we should avoid reading the register here and do it instead at read of the record? I 'think' you could in theory use different storage for the CPER depending on other unhandled errors or whatever else meant you didn't want a fixed location.
Quoted 2 lines
Or maybe just add a comment to say that the location of CPER storage is fixed.
Sorry, but I missed your point. The actual offset of the error block address is defined when
fw_cfgcallback is called. When this happens, this function is called:
Quoted 16 lines
void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
GArray *hardware_error)
{
/* Create a read-only fw_cfg file for GHES */
fw_cfg_add_file(s, ACPI_HW_ERROR_FW_CFG_FILE, hardware_error->data,
hardware_error->len);
/* Create a read-write fw_cfg file for Address */
fw_cfg_add_file_callback(s, ACPI_HW_ERROR_ADDR_FW_CFG_FILE, NULL, NULL,
NULL, &(ags->hw_error_le), sizeof(ags->hw_error_le), false);
fw_cfg_add_file_callback(s, ACPI_HEST_ADDR_FW_CFG_FILE, NULL, NULL,
NULL, &(ags->hest_addr_le), sizeof(ags->hest_addr_le), false);
ags->present = true;
}My question was intended to be a little different but was based on a misread on my part. I'd failed to figure out this function is called on each addition of an error not just once.
Code is fine as is.
Jonathan
Quoted 20 lines
The other calls for
fw_cfgfunctions ensure the offset of the memory read inside thehardware_errorfirmware and this never changes, as such offsets are defined when thehardware_firmwareis built atbuild_ghes_error_table()function. This will only change if such function is called again, which would, in turn, makeacpi_ghes_add_fw_cfg()be called again.In any case, no matter if build_ghes_error_table()/acpi_ghes_add_fw_cfg() is called only once or multiple times [1], at the time
get_ghes_source_offsets()is called, such offsets are stable.[1] On some tests I did adding printks, the GHES build logic and the callbacks are called twice - both before loading OSPM.
If migration is used, I suspect that it will be called again during migration but before starting OSPM. Again, when
get_ghes_source_offsets()is called, the offsets are fixed.Thanks,
Mauro
PATCH 5/6 acpi/generic_event_device: Update GHES migration to cover hest addr
In reply to Mauro Carvalho ChehabThe GHES migration logic at GED should now support HEST table location too.
Increase migration version and change needed to check for both ghes_addr_le and hest_addr_le.
--- hw/acpi/generic_event_device.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
hw/acpi/generic_event_device.c +29 -0
@@ -387,6 +387,34 @@ static const VMStateDescription vmstate_ghes_state = { } }; +static const VMStateDescription vmstate_hest = { + .name ="acpi-hest" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (const VMStateField []) { +VMSTATE_UINT64 (hest_addr_le, AcpiGhesState), +VMSTATE_END_OF_LIST () + }, +}; + +static bool hest_needed (void *opaque) +{ +AcpiGedState *s = opaque; +return s->ghes_state.hest_addr_le; +} + +static const VMStateDescription vmstate_hest_state = { + .name ="acpi-ged/hest" , + .version_id =1 , + .minimum_version_id =1 , + .needed = hest_needed, + .fields = (const VMStateField []) { +VMSTATE_STRUCT (ghes_state, AcpiGedState,1 , + vmstate_hest, AcpiGhesState), +VMSTATE_END_OF_LIST () + } +}; +static const VMStateDescription vmstate_acpi_ged = { .name ="acpi-ged" , .version_id =1 ,
@@ -399,6 +427,7 @@ static const VMStateDescription vmstate_acpi_ged = { &vmstate_memhp_state, &vmstate_cpuhp_state, &vmstate_ghes_state, + &vmstate_hest_state, NULL } };
Signature · 1 line
2.47.0
Re: [PATCH 5/6] acpi/generic_event_device: Update GHES migration to cover hest addr
Quoted 5 lines · On Wed, 13 Nov 2024 09:37:02 +0100 Mauro Carvalho Chehab…
The GHES migration logic at GED should now support HEST table location too.
Increase migration version and change needed to check for both
ghes_addr_leandhest_addr_le.
Where is the migration version increased? Maybe I'm misunderstanding the comment.
Quoted 53 lines
Signed-off-by Mauro Carvalho Chehab <[email protected]>--- hw/acpi/generic_event_device.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)hw/acpi/generic_event_device.c +29
-0@@ -387,6 +387,34 @@ static const VMStateDescription vmstate_ghes_state = { } }; +static const VMStateDescription vmstate_hest = { + .name ="acpi-hest" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (const VMStateField []) { +VMSTATE_UINT64 (hest_addr_le, AcpiGhesState), +VMSTATE_END_OF_LIST () + }, +}; + +static bool hest_needed (void *opaque) +{ +AcpiGedState *s = opaque; +return s->ghes_state.hest_addr_le; +} + +static const VMStateDescription vmstate_hest_state = { + .name ="acpi-ged/hest" , + .version_id =1 , + .minimum_version_id =1 , + .needed = hest_needed, + .fields = (const VMStateField []) { +VMSTATE_STRUCT (ghes_state, AcpiGedState,1 , + vmstate_hest, AcpiGhesState), +VMSTATE_END_OF_LIST () + } +}; +static const VMStateDescription vmstate_acpi_ged = { .name ="acpi-ged" , .version_id =1 ,@@ -399,6 +427,7 @@ static const VMStateDescription vmstate_acpi_ged = { &vmstate_memhp_state, &vmstate_cpuhp_state, &vmstate_ghes_state, + &vmstate_hest_state, NULL } };
Re: [PATCH 5/6] acpi/generic_event_device: Update GHES migration to cover hest addr
Em Wed, 20 Nov 2024 15:01:19 +0000
Jonathan Cameron <[email protected]> escreveu:
Quoted 11 lines
Quoted 5 lines · On Wed, 13 Nov 2024 09:37:02 +0100 Mauro Carvalho Chehab…
The GHES migration logic at GED should now support HEST table location too.
Increase migration version and change needed to check for both
ghes_addr_leandhest_addr_le.Where is the migration version increased? Maybe I'm misunderstanding the comment.
Legacy comment. We dropped migration version increase, as this is not needed anymore.
Comment dropped.
Quoted 46 lines
Quoted 46 lines
Signed-off-by Mauro Carvalho Chehab <[email protected]>--- hw/acpi/generic_event_device.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)hw/acpi/generic_event_device.c +28
-0@@ -387,6 +387,34 @@ static const VMStateDescription vmstate_ghes_state = { } }; +static const VMStateDescription vmstate_hest = { + .name ="acpi-hest" , + .version_id =1 , + .minimum_version_id =1 , + .fields = (const VMStateField []) { +VMSTATE_UINT64 (hest_addr_le, AcpiGhesState), +VMSTATE_END_OF_LIST () + }, +}; + +static bool hest_needed (void *opaque) +{ +AcpiGedState *s = opaque; +return s->ghes_state.hest_addr_le; +} + +static const VMStateDescription vmstate_hest_state = { + .name ="acpi-ged/hest" , + .version_id =1 , + .minimum_version_id =1 , + .needed = hest_needed, + .fields = (const VMStateField []) { +VMSTATE_STRUCT (ghes_state, AcpiGedState,1 , + vmstate_hest, AcpiGhesState), +VMSTATE_END_OF_LIST () + } +}; +static const VMStateDescription vmstate_acpi_ged = { .name ="acpi-ged" , .version_id =1 ,
Quoted 9 lines
hw/acpi/generic_event_device.c static const VMStateDescription vmstate_acpi_ged = { · line 433
Quoted 8 lines
hw/acpi/generic_event_device.c +1
-0@@ -399,6 +427,7 @@ static const VMStateDescription vmstate_acpi_ged = { &vmstate_memhp_state, &vmstate_cpuhp_state, &vmstate_ghes_state, + &vmstate_hest_state, NULL } };
Thanks,
Mauro
PATCH 6/6 acpi/generic_event_device: add logic to detect if HEST addr is available
In reply to Mauro Carvalho ChehabCreate a new property (x-has-hest-addr) and use it to detect if the GHES table offsets can be calculated from the HEST address (qemu 9.2 and upper) or via the legacy way via an offset obtained from the hardware_errors firmware file.
--- hw/acpi/generic_event_device.c | 1 + hw/acpi/ghes.c | 27 ++++++++++++++++++++------- hw/arm/virt-acpi-build.c | 30 ++++++++++++++++++++++++++---- hw/core/machine.c | 2 ++ include/hw/acpi/ghes.h | 1 + 5 files changed, 50 insertions(+), 11 deletions(-)
hw/acpi/generic_event_device.c +1 -0
@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)static Property acpi_ged_properties[] = {DEFINE_PROP_UINT32 ("ged-event" , AcpiGedState, ged_event_bitmap,0 ), +DEFINE_PROP_BOOL ("x-has-hest-addr" , AcpiGedState, ghes_state.hest_lookup, true),DEFINE_PROP_END_OF_LIST (), };
hw/acpi/ghes.c +20 -7
@@ -365,6 +365,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors, {AcpiTable table = { .sig ="HEST" , .rev =1 , .oem_id = oem_id, .oem_table_id = oem_table_id }; +AcpiGedState *acpi_ged_state; +AcpiGhesState *ags =NULL ;int i;build_ghes_error_table (hardware_errors, linker, num_sources);
@@ -385,10 +387,19 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,* tell firmware to write into GPA the address of HEST via fw_cfg, * once initialized. */ -bios_linker_loader_write_pointer (linker, -ACPI_HEST_ADDR_FW_CFG_FILE ,0 , -sizeof (uint64_t ), -ACPI_BUILD_TABLE_FILE , hest_offset); + + acpi_ged_state =ACPI_GED (object_resolve_path_type ("" ,TYPE_ACPI_GED , +NULL )); +if (acpi_ged_state) { + ags = &acpi_ged_state->ghes_state; + } + +if (ags->hest_lookup) { +bios_linker_loader_write_pointer (linker, +ACPI_HEST_ADDR_FW_CFG_FILE ,0 , +sizeof (uint64_t ), +ACPI_BUILD_TABLE_FILE , hest_offset); + } } void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
@@ -402,8 +413,10 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,fw_cfg_add_file_callback (s,ACPI_HW_ERROR_ADDR_FW_CFG_FILE ,NULL ,NULL ,NULL , &(ags->hw_error_le),sizeof (ags->hw_error_le), false); -fw_cfg_add_file_callback (s,ACPI_HEST_ADDR_FW_CFG_FILE ,NULL ,NULL , -NULL , &(ags->hest_addr_le),sizeof (ags->hest_addr_le), false); +if (ags && ags->hest_lookup) { +fw_cfg_add_file_callback (s,ACPI_HEST_ADDR_FW_CFG_FILE ,NULL ,NULL , +NULL , &(ags->hest_addr_le),sizeof (ags->hest_addr_le), false); + } ags->present = true; }
@@ -518,7 +531,7 @@ void ghes_record_cper_errors(const void *cper, size_t len, } ags = &acpi_ged_state->ghes_state; -if (!ags->hest_addr_le) { +if (!ags->hest_lookup) {get_hw_error_offsets (le64_to_cpu (ags->hw_error_le), &cper_addr, &read_ack_register_addr); }else {
hw/arm/virt-acpi-build.c +26 -4
@@ -893,6 +893,10 @@ static const AcpiNotificationSourceId hest_ghes_notify[] = { {ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA}, }; +static const AcpiNotificationSourceId hest_ghes_notify_9_1[] = { + {ACPI_HEST_SRC_ID_SYNC ,ACPI_GHES_NOTIFY_SEA }, +}; +static void virt_acpi_build (VirtMachineState *vms,AcpiBuildTables *tables) {
@@ -946,10 +950,28 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)build_dbg2 (tables_blob, tables->linker, vms);if (vms->ras) { -acpi_add_table (table_offsets, tables_blob); -acpi_build_hest (tables_blob, tables->hardware_errors, tables->linker, - hest_ghes_notify,ARRAY_SIZE (hest_ghes_notify), - vms->oem_id, vms->oem_table_id); +AcpiGhesState *ags; +AcpiGedState *acpi_ged_state; + + acpi_ged_state =ACPI_GED (object_resolve_path_type ("" ,TYPE_ACPI_GED , +NULL )); +if (acpi_ged_state) { + ags = &acpi_ged_state->ghes_state; + +acpi_add_table (table_offsets, tables_blob); + +if (!ags->hest_lookup) { +acpi_build_hest (tables_blob, tables->hardware_errors, + tables->linker, hest_ghes_notify_9_1, +ARRAY_SIZE (hest_ghes_notify_9_1), + vms->oem_id, vms->oem_table_id); + }else { +acpi_build_hest (tables_blob, tables->hardware_errors, + tables->linker, hest_ghes_notify, +ARRAY_SIZE (hest_ghes_notify), + vms->oem_id, vms->oem_table_id); + } + } }if (ms->numa_state->num_nodes >0 ) {
hw/core/machine.c +2 -0
@@ -34,10 +34,12 @@#include "hw/virtio/virtio-pci.h" #include "hw/virtio/virtio-net.h" #include "hw/virtio/virtio-iommu.h" +#include "hw/acpi/generic_event_device.h" #include "audio/audio.h" GlobalProperty hw_compat_9_1[] = { {TYPE_PCI_DEVICE ,"x-pcie-ext-tag" ,"false" }, + {TYPE_ACPI_GED ,"x-has-hest-addr" ,"false" }, };const size_t hw_compat_9_1_len =G_N_ELEMENTS (hw_compat_9_1);
include/hw/acpi/ghes.h +1 -0
@@ -61,6 +61,7 @@ typedef struct AcpiGhesState {uint64_t hest_addr_le;uint64_t hw_error_le;bool present;/* True if GHES is present at all on this board */ +bool hest_lookup;/* True if HEST address is present */ } AcpiGhesState;/*
Signature · 1 line
2.47.0
Re: [PATCH 6/6] acpi/generic_event_device: add logic to detect if HEST addr is available
Quoted 6 lines · On Wed, 13 Nov 2024 09:37:03 +0100 Mauro Carvalho Chehab…
Create a new property (x-has-hest-addr) and use it to detect if the GHES table offsets can be calculated from the HEST address (qemu 9.2 and upper) or via the legacy way via an offset obtained from the
hardware_errorsfirmware file.Signed-off-by Mauro Carvalho Chehab <[email protected]>
Comments inline.
Nice work hammering all this into shape.
Thanks,
Jonathan
Quoted 35 lines
--- hw/acpi/generic_event_device.c | 1 + hw/acpi/ghes.c | 27 ++++++++++++++++++++------- hw/arm/virt-acpi-build.c | 30 ++++++++++++++++++++++++++---- hw/core/machine.c | 2 ++ include/hw/acpi/ghes.h | 1 + 5 files changed, 50 insertions(+), 11 deletions(-)hw/acpi/generic_event_device.c +1
-0@@ -318,6 +318,7 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)static Property acpi_ged_properties[] = {DEFINE_PROP_UINT32 ("ged-event" , AcpiGedState, ged_event_bitmap,0 ), +DEFINE_PROP_BOOL ("x-has-hest-addr" , AcpiGedState, ghes_state.hest_lookup, true),DEFINE_PROP_END_OF_LIST (), };hw/acpi/ghes.c +2
-0@@ -365,6 +365,8 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors, {AcpiTable table = { .sig ="HEST" , .rev =1 , .oem_id = oem_id, .oem_table_id = oem_table_id }; +AcpiGedState *acpi_ged_state; +AcpiGhesState *ags =NULL ;int i;build_ghes_error_table (hardware_errors, linker, num_sources);@@ -385,10 +387,19 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,* tell firmware to write into GPA the address of HEST via fw_cfg,
hw/acpi/ghes.c void acpi_build_hest(GArray *table_data, GArray *hardware_errors, · line 393
Quoted 10 lines
hw/acpi/ghes.c +4
-4* once initialized. */ -bios_linker_loader_write_pointer (linker, -ACPI_HEST_ADDR_FW_CFG_FILE ,0 , -sizeof (uint64_t ), -ACPI_BUILD_TABLE_FILE , hest_offset); + + acpi_ged_state =ACPI_GED (object_resolve_path_type ("" ,TYPE_ACPI_GED , +NULL )); +if (acpi_ged_state) {
Won't fail, but if it did (And given you have a check you are assuming it might).
hw/acpi/ghes.c void acpi_build_hest(GArray *table_data, GArray *hardware_errors, · line 396
Quoted 3 lines
hw/acpi/ghes.c +3
-0+ ags = &acpi_ged_state->ghes_state; + } +
Then ags is NULL and boom.
Quoted 13 lines
hw/acpi/ghes.c +6
-0+if (ags->hest_lookup) { +bios_linker_loader_write_pointer (linker, +ACPI_HEST_ADDR_FW_CFG_FILE ,0 , +sizeof (uint64_t ), +ACPI_BUILD_TABLE_FILE , hest_offset); + } }hw/arm/virt-acpi-build.c +0
-0
hw/arm/virt-acpi-build.c static const AcpiNotificationSourceId hest_ghes_notify[] = { · line 897
Quoted 5 lines
hw/arm/virt-acpi-build.c +2
-0@@ -893,6 +893,10 @@ static const AcpiNotificationSourceId hest_ghes_notify[] = { {ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA}, }; +static const AcpiNotificationSourceId hest_ghes_notify_9_1[] = { + {ACPI_HEST_SRC_ID_SYNC, ACPI_GHES_NOTIFY_SEA},
{ ACPI...
Quoted 1 line
hw/arm/virt-acpi-build.c +1
-0+};