Skip to contentSkip to conversation

nvme-fabrics: handle zero MAXCMD without closing the connection

PATCH Applied Maurizio Lombardi 3 participants 3 messages Dec 3, 2024 – Dec 4, 2024 NVMe

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 nvme-fabrics: handle zero MAXCMD without closing the connection

The NVMe specification states that MAXCMD is mandatory
for NVMe-over-Fabrics implementations. However, some NVMe/TCP and NVMe/FC arrays from major vendors have buggy firmware that reports MAXCMD as zero in the Identify Controller data structure.

Currently, the host implementation returns an error in such cases, completely preventing the host from connecting to the target.

Fix the issue by printing a clear warning message about the firmware bug and allowing the connection to proceed. It assumes that the target supports a MAXCMD value of SQSIZE + 1. If any issues arise, the user can manually adjust SQSIZE to mitigate them.

Fixes 4999568184e5 ("nvme-fabrics: check max outstanding commands")

---

V2: replace dev_err() with dev_warn()

 drivers/nvme/host/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/nvme/host/core.c +3 -2
index 52b01a15aad1..30327e3b2662 100644
@@ -3260,8 +3260,9 @@ static int nvme_check_ctrl_fabric_info(struct nvme_ctrl *ctrl, struct nvme_id_ct
 	}
 
 	if (!ctrl->maxcmd) {
-		dev_err(ctrl->device, "Maximum outstanding commands is 0\n");
-		return -EINVAL;
+		dev_warn(ctrl->device,
+			"Firmware bug: maximum outstanding commands is 0\n");
+		ctrl->maxcmd = ctrl->sqsize + 1;
 	}
 
 	return 0;
Signature · 1 line
2.43.5
maintainer Applied
#2 lore raw
In reply to Maurizio Lombardi
Quoted 5 lines · Maurizio Lombardi

The NVMe specification states that MAXCMD is mandatory
for NVMe-over-Fabrics implementations. However, some NVMe/TCP and NVMe/FC arrays from major vendors have buggy firmware that reports MAXCMD as zero in the Identify Controller data structure.

Quoted 7 lines

Currently, the host implementation returns an error in such cases, completely preventing the host from connecting to the target.

Fix the issue by printing a clear warning message about the firmware bug and allowing the connection to proceed. It assumes that the target supports a MAXCMD value of SQSIZE + 1. If any issues arise, the user can manually adjust SQSIZE to mitigate them.

Thanks, applied to nvme-6.13.