sched_ext: split global idle cpumask into per-NUMA cpumasks
Subsystems (2)
PATCH v3 1/1 sched_ext: split global idle cpumask into per-NUMA cpumasks
= Overview =
As discussed during the sched_ext office hours, using a global cpumask to keep track of the idle CPUs can be inefficient and it may not scale really well on large NUMA systems.
Therefore, split the idle cpumask into multiple per-NUMA node cpumasks to improve scalability and performance on such large systems.
Scalability issues seem to be more noticeable on Intel Sapphire Rapids dual-socket architectures.
= Test =
Hardware:
- System: DGX B200
- CPUs: 224 SMT threads (112 physical cores)
- Processor: INTEL(R) XEON(R) PLATINUM 8570
- 2 NUMA nodes
Scheduler:
- scx_simple [1] (so that we can focus at the built-in idle selection policy and not at the scheduling policy itself)
Test:
- Run a parallel kernel build make -j $(nproc) and measure the average elapsed time over 10 runs:
avg time | stdev
---------+------
before: 52.431s | 2.895 after: 50.342s | 2.895
= Conclusion =
Splitting the global cpumask into multiple per-NUMA cpumasks helped to achieve a speedup of approximately +4% with this particular architecture and test case.
I've repeated the same test on a DGX-1 (40 physical cores, Intel Xeon E5-2698 v4 @ 2.20GHz, 2 NUMA nodes) and I didn't observe any measurable difference.
In general, on smaller systems, I haven't noticed any measurable regressions or improvements with the same test (parallel kernel build) and scheduler (scx_simple).
NOTE: splitting the global cpumask into multiple cpumasks may increase the overhead of scx_bpf_pick_idle_cpu() or ops.select_cpu() (for schedulers relying on the built-in CPU idle selection policy) in presence of multiple NUMA nodes, particularly under high system load, since we may have to access multiple cpumasks to find an idle CPU.
However, this increased overhead seems to be highly compensated by a lower overhead when updating the idle state (__scx_update_idle()) and by the fact that CPUs are more likely operating within their local idle cpumask, reducing the stress on the cache coherency protocol.
= References =
[1] https://github.com/sched-ext/scx/blob/main/scheds/c/scx_simple.bpf.c
ChangeLog v2 -> v3:
- introduce for_each_online_node_wrap()
- re-introduce cpumask_intersects() in test_and_clear_cpu_idle() (to reduce memory writes / cache coherence pressure)
- get rid of the redundant scx_selcpu_topo_numa logic
[test results are pretty much identical, so I haven't updated them from v2]
ChangeLog v1 -> v2:
- renamed for_each_node_mask|state_from() -> for_each_node_mask|state_wrap()
- misc cpumask optimizations (thanks to Yury)
Andrea Righi (3):
nodemask: Introduce for_each_node_mask_wrap/for_each_node_state_wrap()
sched_ext: Introduce per-NUMA idle cpumasks
sched_ext: get rid of the scx_selcpu_topo_numa logic
include/linux/nodemask.h | 14 ++++ kernel/sched/ext.c | 200 ++++++++++++++++++++++++++--------------------- 2 files changed, 124 insertions(+), 90 deletions(-)
PATCH 1/3 nodemask: Introduce for_each_node_mask_wrap/for_each_node_state_wrap()
Introduce NUMA node iterators to support circular iteration, starting from a specified node.
--- include/linux/nodemask.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
include/linux/nodemask.h +14 -0
@@ -392,6 +392,16 @@ static inline void __nodes_fold(nodemask_t *dstp, const nodemask_t *origp, for ((node) = 0; (node) < 1 && !nodes_empty(mask); (node)++)#endif /* MAX_NUMNODES */ +#if MAX_NUMNODES >1 +#define for_each_node_mask_wrap (node, mask, start) \ + for_each_set_bit_wrap((node), (mask).bits, MAX_NUMNODES, (start)) +#else /* MAX_NUMNODES == 1 */ +#define for_each_node_mask_wrap (node, mask, start) \ + for ((node) = 0; \ + (node) < 1 && !nodes_empty(mask); \ + (node)++, (void)(start)) +#endif /* MAX_NUMNODES */ +/* * Bitmasks that are kept for all the nodes. */
@@ -441,6 +451,9 @@ static inline int num_node_state(enum node_states state)#define for_each_node_state (__node, __state) \ for_each_node_mask((__node), node_states[__state]) +#define for_each_node_state_wrap (__node, __state, __start) \ + for_each_node_mask_wrap((__node), node_states[__state], __start) +#define first_online_node first_node(node_states[N_ONLINE])#define first_memory_node first_node(node_states[N_MEMORY])static inline unsigned int next_online_node (int nid)
@@ -535,6 +548,7 @@ static inline int node_random(const nodemask_t *maskp)#define for_each_node (node) for_each_node_state(node, N_POSSIBLE)#define for_each_online_node (node) for_each_node_state(node, N_ONLINE) +#define for_each_online_node_wrap (node, start) for_each_node_state(node, N_ONLINE, start)/* * For nodemask scratch area.
Signature · 1 line
2.47.1
Re: [PATCH 1/3] nodemask: Introduce for_each_node_mask_wrap/for_each_node_state_wrap()
Quoted 4 lines · Andrea Righi
Introduce NUMA node iterators to support circular iteration, starting from a specified node.
Signed-off-by Andrea Righi <[email protected]>
Quoted 45 lines
--- include/linux/nodemask.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)include/linux/nodemask.h +14
-0@@ -392,6 +392,16 @@ static inline void __nodes_fold(nodemask_t *dstp, const nodemask_t *origp, for ((node) = 0; (node) < 1 && !nodes_empty(mask); (node)++)#endif /* MAX_NUMNODES */ +#if MAX_NUMNODES >1 +#define for_each_node_mask_wrap (node, mask, start) \ + for_each_set_bit_wrap((node), (mask).bits, MAX_NUMNODES, (start)) +#else /* MAX_NUMNODES == 1 */ +#define for_each_node_mask_wrap (node, mask, start) \ + for ((node) = 0; \ + (node) < 1 && !nodes_empty(mask); \ + (node)++, (void)(start)) +#endif /* MAX_NUMNODES */ +/* * Bitmasks that are kept for all the nodes. */ @@ -441,6 +451,9 @@ static inline int num_node_state(enum node_states state)#define for_each_node_state (__node, __state) \ for_each_node_mask((__node), node_states[__state]) +#define for_each_node_state_wrap (__node, __state, __start) \ + for_each_node_mask_wrap((__node), node_states[__state], __start) +#define first_online_node first_node(node_states[N_ONLINE])#define first_memory_node first_node(node_states[N_MEMORY])static inline unsigned int next_online_node (int nid)@@ -535,6 +548,7 @@ static inline int node_random(const nodemask_t *maskp)#define for_each_node (node) for_each_node_state(node, N_POSSIBLE)#define for_each_online_node (node) for_each_node_state(node, N_ONLINE) +#define for_each_online_node_wrap (node, start) for_each_node_state(node, N_ONLINE, start)/* * For nodemask scratch area. Signature · 1 line
2.47.1
PATCH 2/3 sched_ext: Introduce per-NUMA idle cpumasks
In reply to Andrea RighiUsing a single global idle mask can lead to inefficiencies and a lot of stress on the cache coherency protocol on large systems with multiple NUMA nodes, since all the CPUs can create a really intense read/write activity on the single global cpumask.
Therefore, split the global cpumask into multiple per-NUMA node cpumasks to improve scalability and performance on large systems.
The concept is that each cpumask will track only the idle CPUs within its corresponding NUMA node, treating CPUs in other NUMA nodes as busy. In this way concurrent access to the idle cpumask will be restricted within each NUMA node.
[Open issue]
The scx_bpf_get_idle_cpu/smtmask() kfunc's, that are supposed to return a single cpumask for all the CPUs, have been changed to report only the cpumask of the current NUMA node (using the current CPU); this breaks the old behavior, so it can potentially introduce regressions in some scx schedulers.
An alternative approach could be to construct a global cpumask on-the-fly, but this could add significant overhead to ops.select_cpu() for schedulers relying on these kfunc's. Additionally, it would be less reliable than accessing the actual cpumasks, as the copy could quickly become out of sync and not represent the actual idle state very well.
Probably a better way to solve this issue is to introduce new kfunc's to explicitly select specific per-NUMA cpumask and modify the scx schedulers to transition to this new API, for example:
const struct cpumask *scx_bpf_get_idle_numa_cpumask(int node) const struct cpumask *scx_bpf_get_idle_numa_smtmask(int node)
--- kernel/sched/ext.c | 159 ++++++++++++++++++++++++++++++++------------- 1 file changed, 114 insertions(+), 45 deletions(-)
kernel/sched/ext.c +114 -45
@@ -933,7 +933,37 @@ static struct delayed_work scx_watchdog_work;static struct {cpumask_var_t cpu;cpumask_var_t smt; -} idle_masks CL_ALIGNED_IF_ONSTACK; +} **idle_masks CL_ALIGNED_IF_ONSTACK; + +static struct cpumask *get_idle_cpumask (int cpu) +{ +int node =cpu_to_node (cpu); + +return idle_masks[node]->cpu; +} + +static struct cpumask *get_idle_smtmask (int cpu) +{ +int node =cpu_to_node (cpu); + +return idle_masks[node]->smt; +} + +static void idle_masks_init (void ) +{ +int node; + + idle_masks =kcalloc (num_possible_nodes (),sizeof (*idle_masks),GFP_KERNEL ); +BUG_ON (!idle_masks); + +for_each_node_state (node,N_POSSIBLE ) { + idle_masks[node] =kzalloc_node (sizeof (**idle_masks),GFP_KERNEL , node); +BUG_ON (!idle_masks[node]); + +BUG_ON (!alloc_cpumask_var_node (&idle_masks[node]->cpu,GFP_KERNEL , node)); +BUG_ON (!alloc_cpumask_var_node (&idle_masks[node]->smt,GFP_KERNEL , node)); + } +}#endif /* CONFIG_SMP */
@@ -3156,29 +3186,34 @@ static bool test_and_clear_cpu_idle(int cpu)*/ if (sched_smt_active ()) {const struct cpumask *smt =cpu_smt_mask (cpu); +struct cpumask *idle_smt =get_idle_smtmask (cpu);/* * If offline, @cpu is not its own sibling and * scx_pick_idle_cpu() can get caught in an infinite loop as -* @cpu is never cleared from idle_masks.smt. Ensure that @cpu -* is eventually cleared. +* @cpu is never cleared from the idle SMT mask. Ensure that +* @cpu is eventually cleared. +* +* NOTE: Use cpumask_intersects() and cpumask_test_cpu() to +* reduce memory writes, which may help alleviate cache +* coherence pressure. */ -if (cpumask_intersects (smt, idle_masks.smt)) -cpumask_andnot (idle_masks.smt, idle_masks.smt, smt); -else if (cpumask_test_cpu (cpu, idle_masks.smt)) -__cpumask_clear_cpu (cpu, idle_masks.smt); +if (cpumask_intersects (smt, idle_smt)) +cpumask_andnot (idle_smt, idle_smt, smt); +else if (cpumask_test_cpu (cpu, idle_smt)) +__cpumask_clear_cpu (cpu, idle_smt); }#endif -return cpumask_test_and_clear_cpu (cpu, idle_masks.cpu); +return cpumask_test_and_clear_cpu (cpu,get_idle_cpumask (cpu)); } -static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) +static s32 scx_pick_idle_cpu_from_node (int node,const struct cpumask *cpus_allowed,u64 flags) {int cpu; retry:if (sched_smt_active ()) { - cpu =cpumask_any_and_distribute (idle_masks.smt, cpus_allowed); + cpu =cpumask_any_and_distribute (idle_masks[node]->smt, cpus_allowed);if (cpu < nr_cpu_ids) goto found;
@@ -3186,15 +3221,42 @@ static s32 scx_pick_idle_cpu(const struct cpumask *cpus_allowed, u64 flags)return -EBUSY ; } - cpu =cpumask_any_and_distribute (idle_masks.cpu, cpus_allowed); -if (cpu >= nr_cpu_ids) -return -EBUSY ; + cpu =cpumask_any_and_distribute (idle_masks[node]->cpu, cpus_allowed); +if (cpu < nr_cpu_ids) + goto found; + +return -EBUSY ; found:if (test_and_clear_cpu_idle (cpu))return cpu;else goto retry; + +} + +static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) +{ +int start =cpu_to_node (smp_processor_id ()); +int node, cpu; + +for_each_node_state_wrap (node,N_ONLINE , start) { +/* +* scx_pick_idle_cpu_from_node() can be expensive and redundant +* if none of the CPUs in the NUMA node can be used (according +* to cpus_allowed). +* +* Therefore, check if the NUMA node is usable in advance to +* save some CPU cycles. +*/ +if (!cpumask_intersects (cpumask_of_node (node), cpus_allowed)) +continue ; + cpu =scx_pick_idle_cpu_from_node (node, cpus_allowed, flags); +if (cpu >=0 ) +return cpu; + } + +return -EBUSY ; }/*
@@ -3338,11 +3400,11 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu, {const struct cpumask *llc_cpus =NULL ;const struct cpumask *numa_cpus =NULL ; +int node =cpu_to_node (prev_cpu);s32 cpu; *found = false; -/* * This is necessary to protect llc_cpus. */
@@ -3361,7 +3423,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,*/ if (p->nr_cpus_allowed >=num_possible_cpus ()) {if (static_branch_maybe (CONFIG_NUMA , &scx_selcpu_topo_numa)) - numa_cpus =cpumask_of_node (cpu_to_node (prev_cpu)); + numa_cpus = p->cpus_ptr;if (static_branch_maybe (CONFIG_SCHED_MC , &scx_selcpu_topo_llc)) {struct sched_domain *sd;
@@ -3401,9 +3463,9 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,* piled up on it even if there is an idle core elsewhere on * the system. */ -if (!cpumask_empty (idle_masks.cpu) && - !(current->flags &PF_EXITING ) && -cpu_rq (cpu)->scx.local_dsq.nr ==0 ) { +if (!(current->flags &PF_EXITING ) && +cpu_rq (cpu)->scx.local_dsq.nr ==0 && + !cpumask_empty (get_idle_cpumask (cpu))) {if (cpumask_test_cpu (cpu, p->cpus_ptr)) goto cpu_found; }
@@ -3417,7 +3479,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,/* * Keep using @prev_cpu if it's part of a fully idle core. */ -if (cpumask_test_cpu (prev_cpu, idle_masks.smt) && +if (cpumask_test_cpu (prev_cpu,get_idle_smtmask (prev_cpu)) &&test_and_clear_cpu_idle (prev_cpu)) { cpu = prev_cpu; goto cpu_found;
@@ -3427,7 +3489,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,* Search for any fully idle core in the same LLC domain. */ if (llc_cpus) { - cpu =scx_pick_idle_cpu (llc_cpus,SCX_PICK_IDLE_CORE ); + cpu =scx_pick_idle_cpu_from_node (node, llc_cpus,SCX_PICK_IDLE_CORE );if (cpu >=0 ) goto cpu_found; }
@@ -3436,7 +3498,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,* Search for any fully idle core in the same NUMA node. */ if (numa_cpus) { - cpu =scx_pick_idle_cpu (numa_cpus,SCX_PICK_IDLE_CORE ); + cpu =scx_pick_idle_cpu_from_node (node, numa_cpus,SCX_PICK_IDLE_CORE );if (cpu >=0 ) goto cpu_found; }
@@ -3444,7 +3506,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,/* * Search for any full idle core usable by the task. */ - cpu =scx_pick_idle_cpu (p->cpus_ptr,SCX_PICK_IDLE_CORE ); + cpu =scx_pick_idle_cpu (p->cpus_ptr, prev_cpu,SCX_PICK_IDLE_CORE );if (cpu >=0 ) goto cpu_found; }
@@ -3461,7 +3523,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,* Search for any idle CPU in the same LLC domain. */ if (llc_cpus) { - cpu =scx_pick_idle_cpu (llc_cpus,0 ); + cpu =scx_pick_idle_cpu_from_node (node, llc_cpus,0 );if (cpu >=0 ) goto cpu_found; }
@@ -3470,7 +3532,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,* Search for any idle CPU in the same NUMA node. */ if (numa_cpus) { - cpu =scx_pick_idle_cpu (numa_cpus,0 ); + cpu =scx_pick_idle_cpu_from_node (node, numa_cpus,0 );if (cpu >=0 ) goto cpu_found; }
@@ -3478,7 +3540,7 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,/* * Search for any idle CPU usable by the task. */ - cpu =scx_pick_idle_cpu (p->cpus_ptr,0 ); + cpu =scx_pick_idle_cpu (p->cpus_ptr, prev_cpu,0 );if (cpu >=0 ) goto cpu_found;
@@ -3560,12 +3622,18 @@ static void set_cpus_allowed_scx(struct task_struct *p,static void reset_idle_masks (void ) { +int node; +/* * Consider all online cpus idle. Should converge to the actual state * quickly. */ -cpumask_copy (idle_masks.cpu, cpu_online_mask); -cpumask_copy (idle_masks.smt, cpu_online_mask); +for_each_node_state (node,N_POSSIBLE ) { +const struct cpumask *node_mask =cpumask_of_node (node); + +cpumask_and (idle_masks[node]->cpu, cpu_online_mask, node_mask); +cpumask_copy (idle_masks[node]->smt, idle_masks[node]->cpu); + } }void __scx_update_idle (struct rq *rq,bool idle)
@@ -3578,14 +3646,13 @@ void __scx_update_idle(struct rq *rq, bool idle)return ; } -if (idle) -cpumask_set_cpu (cpu, idle_masks.cpu); -else -cpumask_clear_cpu (cpu, idle_masks.cpu); +assign_cpu (cpu,get_idle_cpumask (cpu), idle);#ifdef CONFIG_SCHED_SMT if (sched_smt_active ()) {const struct cpumask *smt =cpu_smt_mask (cpu); +struct cpumask *idle_cpu =get_idle_cpumask (cpu); +struct cpumask *idle_smt =get_idle_smtmask (cpu);if (idle) {/*
@@ -3593,12 +3660,12 @@ void __scx_update_idle(struct rq *rq, bool idle)* it's only for optimization and self-correcting. */ for_each_cpu (cpu, smt) { -if (!cpumask_test_cpu (cpu, idle_masks.cpu)) +if (!cpumask_test_cpu (cpu, idle_cpu))return ; } - cpumask_or(idle_masks.smt, idle_masks.smt, smt); + cpumask_or(idle_smt, idle_smt, smt); }else { -cpumask_andnot (idle_masks.smt, idle_masks.smt, smt); +cpumask_andnot (idle_smt, idle_smt, smt); } }#endif
@@ -3646,7 +3713,10 @@ static void rq_offline_scx(struct rq *rq)#else /* CONFIG_SMP */ static bool test_and_clear_cpu_idle (int cpu) {return false; } -static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) {return -EBUSY ; } +static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,s32 prev_cpu,u64 flags) +{ +return -EBUSY ; +}static void reset_idle_masks (void ) {}#endif /* CONFIG_SMP */
@@ -6174,8 +6244,7 @@ void __init init_sched_ext_class(void)BUG_ON (rhashtable_init (&dsq_hash, &dsq_hash_params));#ifdef CONFIG_SMP -BUG_ON (!alloc_cpumask_var (&idle_masks.cpu,GFP_KERNEL )); -BUG_ON (!alloc_cpumask_var (&idle_masks.smt,GFP_KERNEL )); +idle_masks_init ();#endif scx_kick_cpus_pnt_seqs = __alloc_percpu(sizeof(scx_kick_cpus_pnt_seqs[0]) * nr_cpu_ids,
@@ -7321,7 +7390,7 @@ __bpf_kfunc void scx_bpf_put_cpumask(const struct cpumask *cpumask)/** * scx_bpf_get_idle_cpumask - Get a referenced kptr to the idle-tracking -* per-CPU cpumask. +* per-CPU cpumask of the current NUMA node. * * Returns NULL if idle tracking is not enabled, or running on a UP kernel. */
@@ -7333,7 +7402,7 @@ __bpf_kfunc const struct cpumask *scx_bpf_get_idle_cpumask(void) }#ifdef CONFIG_SMP -return idle_masks.cpu; +return get_idle_cpumask (smp_processor_id ());#else return cpu_none_mask;#endif
@@ -7341,8 +7410,8 @@ __bpf_kfunc const struct cpumask *scx_bpf_get_idle_cpumask(void)/** * scx_bpf_get_idle_smtmask - Get a referenced kptr to the idle-tracking, -* per-physical-core cpumask. Can be used to determine if an entire physical -* core is free. +* per-physical-core cpumask of the current NUMA node. Can be used to determine +* if an entire physical core is free. * * Returns NULL if idle tracking is not enabled, or running on a UP kernel. */
@@ -7355,9 +7424,9 @@ __bpf_kfunc const struct cpumask *scx_bpf_get_idle_smtmask(void)#ifdef CONFIG_SMP if (sched_smt_active ()) -return idle_masks.smt; +return get_idle_smtmask (smp_processor_id ());else -return idle_masks.cpu; +return get_idle_cpumask (smp_processor_id ());#else return cpu_none_mask;#endif
@@ -7427,7 +7496,7 @@ __bpf_kfunc s32 scx_bpf_pick_idle_cpu(const struct cpumask *cpus_allowed,return -EBUSY ; } -return scx_pick_idle_cpu (cpus_allowed, flags); +return scx_pick_idle_cpu (cpus_allowed,smp_processor_id (), flags); }/**
@@ -7450,7 +7519,7 @@ __bpf_kfunc s32 scx_bpf_pick_any_cpu(const struct cpumask *cpus_allowed,s32 cpu;if (static_branch_likely (&scx_builtin_idle_enabled)) { - cpu =scx_pick_idle_cpu (cpus_allowed, flags); + cpu =scx_pick_idle_cpu (cpus_allowed,smp_processor_id (), flags);if (cpu >=0 )return cpu; }
Signature · 1 line
2.47.1
Re: [PATCH 2/3] sched_ext: Introduce per-NUMA idle cpumasks
Hello,
On Tue, Dec 03, 2024 at 04:36:11PM +0100, Andrea Righi wrote:
...
Quoted 6 lines
Probably a better way to solve this issue is to introduce new kfunc's to explicitly select specific per-NUMA cpumask and modify the scx schedulers to transition to this new API, for example:
const struct cpumask *scx_bpf_get_idle_numa_cpumask(int node) const struct cpumask *scx_bpf_get_idle_numa_smtmask(int node)
Yeah, I don't think we want to break backward compat here. Can we introduce a flag to switch between node-aware and flattened logic and trigger ops error if the wrong flavor is used? Then, we can deprecate and drop the old behavior after a few releases. Also, I think it can be named scx_bpf_get_idle_cpumask_node().
kernel/sched/ext.c static struct delayed_work scx_watchdog_work; · line 950
Quoted 13 lines
kernel/sched/ext.c +13
-0+static struct cpumask *get_idle_cpumask (int cpu) +{ +int node =cpu_to_node (cpu); + +return idle_masks[node]->cpu; +} + +static struct cpumask *get_idle_smtmask (int cpu) +{ +int node =cpu_to_node (cpu); + +return idle_masks[node]->smt; +}
Hmm... why are they keyed by cpu? Wouldn't it make more sense to key them by node?
Quoted 9 lines
kernel/sched/ext.c +9
-0+static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) +{ +int start =cpu_to_node (smp_processor_id ()); +int node, cpu; + +for_each_node_state_wrap (node,N_ONLINE , start) { +/* +* scx_pick_idle_cpu_from_node() can be expensive and redundant +* if none of the CPUs in the NUMA node can be used (according
kernel/sched/ext.c static s32 scx_pick_idle_cpu(const struct cpumask *cpus_allowed, u64 flags) · line 3256
Quoted 10 lines
kernel/sched/ext.c +10
-0+* to cpus_allowed). +* +* Therefore, check if the NUMA node is usable in advance to +* save some CPU cycles. +*/ +if (!cpumask_intersects (cpumask_of_node (node), cpus_allowed)) +continue ; + cpu =scx_pick_idle_cpu_from_node (node, cpus_allowed, flags); +if (cpu >=0 ) +return cpu;
This is fine for now but it'd be ideal if the iteration is in inter-node distance order so that each CPU radiates from local node to the furthest ones.
Thanks.
Signature · 1 line
tejun
Yury Norov
maintainerRe: [PATCH 2/3] sched_ext: Introduce per-NUMA idle cpumasks
Quoted 49 lines · Tejun Heo
Hello,
On Tue, Dec 03, 2024 at 04:36:11PM +0100, Andrea Righi wrote:
...Quoted 6 lines
Probably a better way to solve this issue is to introduce new kfunc's to explicitly select specific per-NUMA cpumask and modify the scx schedulers to transition to this new API, for example:
const struct cpumask *scx_bpf_get_idle_numa_cpumask(int node) const struct cpumask *scx_bpf_get_idle_numa_smtmask(int node)
Yeah, I don't think we want to break backward compat here. Can we introduce a flag to switch between node-aware and flattened logic and trigger ops error if the wrong flavor is used? Then, we can deprecate and drop the old behavior after a few releases. Also, I think it can be named
scx_bpf_get_idle_cpumask_node().kernel/sched/ext.c static struct delayed_work scx_watchdog_work; · line 950
Quoted 13 lines
kernel/sched/ext.c +13
-0+static struct cpumask *get_idle_cpumask (int cpu) +{ +int node =cpu_to_node (cpu); + +return idle_masks[node]->cpu; +} + +static struct cpumask *get_idle_smtmask (int cpu) +{ +int node =cpu_to_node (cpu); + +return idle_masks[node]->smt; +}Hmm... why are they keyed by cpu? Wouldn't it make more sense to key them by node?
Quoted 15 lines
kernel/sched/ext.c +15
-0+static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) +{ +int start =cpu_to_node (smp_processor_id ()); +int node, cpu; + +for_each_node_state_wrap (node,N_ONLINE , start) { +/* +* scx_pick_idle_cpu_from_node() can be expensive and redundant +* if none of the CPUs in the NUMA node can be used (according +* to cpus_allowed). +* +* Therefore, check if the NUMA node is usable in advance to +* save some CPU cycles. +*/ +if (!cpumask_intersects (cpumask_of_node (node), cpus_allowed))
Quoted 8 lines
kernel/sched/ext.c static s32 scx_pick_idle_cpu(const struct cpumask *cpus_allowed, u64 flags) · line 3256
Quoted 4 lines
kernel/sched/ext.c +4
-0+continue ; + cpu =scx_pick_idle_cpu_from_node (node, cpus_allowed, flags); +if (cpu >=0 ) +return cpu;This is fine for now but it'd be ideal if the iteration is in inter-node distance order so that each CPU radiates from local node to the furthest ones.
cpumask_local_spread() does exactly that - traverses CPUs in NUMA-aware order. Or we can use for_each_numa_hop_mask() iterator, which does the same thing more efficiently.
Thanks,
Yury
Re: [PATCH 2/3] sched_ext: Introduce per-NUMA idle cpumasks
Quoted 1 line · Yury Norov
On Tue, Dec 03, 2024 at 02:04:15PM -1000, Tejun Heo wrote:
...
Quoted 24 lines
Quoted 15 lines
Quoted 15 lines
kernel/sched/ext.c +15
-0+static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) +{ +int start =cpu_to_node (smp_processor_id ()); +int node, cpu; + +for_each_node_state_wrap (node,N_ONLINE , start) { +/* +* scx_pick_idle_cpu_from_node() can be expensive and redundant +* if none of the CPUs in the NUMA node can be used (according +* to cpus_allowed). +* +* Therefore, check if the NUMA node is usable in advance to +* save some CPU cycles. +*/ +if (!cpumask_intersects (cpumask_of_node (node), cpus_allowed))Quoted 8 lines
kernel/sched/ext.c static s32 scx_pick_idle_cpu(const struct cpumask *cpus_allowed, u64 flags) · line 3256
Quoted 4 lines
kernel/sched/ext.c +4
-0+continue ; + cpu =scx_pick_idle_cpu_from_node (node, cpus_allowed, flags); +if (cpu >=0 ) +return cpu;This is fine for now but it'd be ideal if the iteration is in inter-node distance order so that each CPU radiates from local node to the furthest ones.
Quoted 3 lines
cpumask_local_spread()does exactly that - traverses CPUs in NUMA-aware order. Or we can usefor_each_numa_hop_mask()iterator, which does the same thing more efficiently.
Nice, for_each_numa_hop_mask() seems to be exactly what I need, there's also a starting node, so with that we don't need to introduce for_each_online_node_wrap() and the other new *_wrap() helpers.
Thanks,
-Andrea
Re: [PATCH 2/3] sched_ext: Introduce per-NUMA idle cpumasks
In reply to Tejun HeoQuoted 11 lines · Tejun Heo
External email: Use caution opening links or attachments
Hello,
On Tue, Dec 03, 2024 at 04:36:11PM +0100, Andrea Righi wrote:
...Quoted 4 lines
Probably a better way to solve this issue is to introduce new kfunc's to explicitly select specific per-NUMA cpumask and modify the scx schedulers to transition to this new API, for example:
Quoted 8 lines
Quoted 2 lines
const struct cpumask *scx_bpf_get_idle_numa_cpumask(int node) const struct cpumask *scx_bpf_get_idle_numa_smtmask(int node)
Yeah, I don't think we want to break backward compat here. Can we introduce a flag to switch between node-aware and flattened logic and trigger ops error if the wrong flavor is used? Then, we can deprecate and drop the old behavior after a few releases. Also, I think it can be named
scx_bpf_get_idle_cpumask_node().
I like the idea of introducing a flag. The default should be flattened cpumask, so everything remains the same, and if a scheduler explicitly enables SCX_OPS_NUMA_IDLE_MASK (suggestions for the name?) we can switch to the NUMA-aware idle logic.
Quoted 17 lines
Quoted 4 lines
kernel/sched/ext.c +3
-0+static struct cpumask *get_idle_cpumask (int cpu) +{ +int node =cpu_to_node (cpu);kernel/sched/ext.c static struct delayed_work scx_watchdog_work; · line 950
Quoted 10 lines
kernel/sched/ext.c +10
-0+ +return idle_masks[node]->cpu; +} + +static struct cpumask *get_idle_smtmask (int cpu) +{ +int node =cpu_to_node (cpu); + +return idle_masks[node]->smt; +}Hmm... why are they keyed by cpu? Wouldn't it make more sense to key them by node?
I was trying to save some code, but it's definitely more clear to use node as key and rename those get_idle_cpumask_node() / get_idle_smtmask_node(). Will change this.
Quoted 16 lines
Quoted 16 lines
kernel/sched/ext.c +15
-0+static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) +{ +int start =cpu_to_node (smp_processor_id ()); +int node, cpu; + +for_each_node_state_wrap (node,N_ONLINE , start) { +/* +* scx_pick_idle_cpu_from_node() can be expensive and redundant +* if none of the CPUs in the NUMA node can be used (according +* to cpus_allowed). +* +* Therefore, check if the NUMA node is usable in advance to +* save some CPU cycles. +*/ +if (!cpumask_intersects (cpumask_of_node (node), cpus_allowed))
Quoted 8 lines
kernel/sched/ext.c static s32 scx_pick_idle_cpu(const struct cpumask *cpus_allowed, u64 flags) · line 3256
Quoted 4 lines
kernel/sched/ext.c +4
-0+continue ; + cpu =scx_pick_idle_cpu_from_node (node, cpus_allowed, flags); +if (cpu >=0 ) +return cpu;This is fine for now but it'd be ideal if the iteration is in inter-node distance order so that each CPU radiates from local node to the furthest ones.
Ok.
Thanks,
-Andrea
Re: [PATCH 2/3] sched_ext: Introduce per-NUMA idle cpumasks
Hello,
On Wed, Dec 04, 2024 at 09:41:43AM +0100, Andrea Righi wrote:
...
Quoted 4 lines
I like the idea of introducing a flag. The default should be flattened cpumask, so everything remains the same, and if a scheduler explicitly enables
SCX_OPS_NUMA_IDLE_MASK(suggestions for the name?) we can switch to the NUMA-aware idle logic.
I think it generally works better to use "node" instead of "numa" for these interfaces. That's more common and matches the interface functions that need to be used and exposed, so maybe sth like SCX_OPS_BUILTIN_IDLE_PER_NODE or SCX_OPS_NODE_BUILTIN_IDLE?
Thanks.
Signature · 1 line
tejun
PATCH 3/3 sched_ext: get rid of the scx_selcpu_topo_numa logic
In reply to Andrea RighiWith the introduction of separate per-NUMA node cpumasks, we automatically track idle CPUs within each NUMA node.
This makes the special logic for determining idle CPUs in each NUMA node redundant and unnecessary, so we can get rid of it.
--- kernel/sched/ext.c | 57 +++++----------------------------------------- 1 file changed, 6 insertions(+), 51 deletions(-)
kernel/sched/ext.c +6 -51
@@ -886,7 +886,6 @@ static DEFINE_STATIC_KEY_FALSE(scx_builtin_idle_enabled);#ifdef CONFIG_SMP static DEFINE_STATIC_KEY_FALSE (scx_selcpu_topo_llc); -static DEFINE_STATIC_KEY_FALSE (scx_selcpu_topo_numa);#endif static struct static_key_false scx_has_op[SCX_OPI_END] =
@@ -3235,10 +3234,9 @@ static s32 scx_pick_idle_cpu_from_node(int node, const struct cpumask *cpus_allo } -static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,u64 flags) +static s32 scx_pick_idle_cpu (const struct cpumask *cpus_allowed,s32 prev_cpu,u64 flags) { -int start =cpu_to_node (smp_processor_id ()); -int node, cpu; +int node, cpu, start =cpu_to_node (prev_cpu);for_each_node_state_wrap (node,N_ONLINE , start) {/*
@@ -3319,9 +3317,8 @@ static bool llc_numa_mismatch(void)*/ static void update_selcpu_topology (void ) { -bool enable_llc = false, enable_numa = false; +bool enable_llc = false;struct sched_domain *sd; -const struct cpumask *cpus;s32 cpu =cpumask_first (cpu_online_mask);/*
@@ -3337,37 +3334,18 @@ static void update_selcpu_topology(void)rcu_read_lock (); sd =rcu_dereference (per_cpu (sd_llc, cpu));if (sd) { -if (sd->span_weight <num_online_cpus ()) +if ((sd->span_weight <num_online_cpus ()) &&llc_numa_mismatch ()) enable_llc = true; } - -/* -* Enable NUMA optimization only when there are multiple NUMA domains -* among the online CPUs and the NUMA domains don't perfectly overlaps -* with the LLC domains. -* -* If all CPUs belong to the same NUMA node and the same LLC domain, -* enabling both NUMA and LLC optimizations is unnecessary, as checking -* for an idle CPU in the same domain twice is redundant. -*/ - cpus =cpumask_of_node (cpu_to_node (cpu)); -if ((cpumask_weight (cpus) <num_online_cpus ()) &&llc_numa_mismatch ()) - enable_numa = true;rcu_read_unlock ();pr_debug ("sched_ext: LLC idle selection %s\n" , enable_llc ?"enabled" :"disabled" ); -pr_debug ("sched_ext: NUMA idle selection %s\n" , - enable_numa ?"enabled" :"disabled" );if (enable_llc)static_branch_enable_cpuslocked (&scx_selcpu_topo_llc);else static_branch_disable_cpuslocked (&scx_selcpu_topo_llc); -if (enable_numa) -static_branch_enable_cpuslocked (&scx_selcpu_topo_numa); -else -static_branch_disable_cpuslocked (&scx_selcpu_topo_numa); }/*
@@ -3388,9 +3366,8 @@ static void update_selcpu_topology(void)* 4. Pick a CPU within the same NUMA node, if enabled: * - choose a CPU from the same NUMA node to reduce memory access latency. * -* Step 3 and 4 are performed only if the system has, respectively, multiple -* LLC domains / multiple NUMA nodes (see scx_selcpu_topo_llc and -* scx_selcpu_topo_numa). +* Step 3 is performed only if the system has multiple LLC domains that are not +* perfectly overlapping with the NUMA domains (see scx_selcpu_topo_llc). * * NOTE: tasks that can only run on 1 CPU are excluded by this logic, because * we never call ops.select_cpu() for them, see select_task_rq().
@@ -3399,7 +3376,6 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu, u64 wake_flags, bool *found) {const struct cpumask *llc_cpus =NULL ; -const struct cpumask *numa_cpus =NULL ;int node =cpu_to_node (prev_cpu);s32 cpu;
@@ -3422,9 +3398,6 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu,* defined by user-space. */ if (p->nr_cpus_allowed >=num_possible_cpus ()) { -if (static_branch_maybe (CONFIG_NUMA , &scx_selcpu_topo_numa)) - numa_cpus = p->cpus_ptr; -if (static_branch_maybe (CONFIG_SCHED_MC , &scx_selcpu_topo_llc)) {struct sched_domain *sd;
@@ -3494,15 +3467,6 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu, goto cpu_found; } -/* -* Search for any fully idle core in the same NUMA node. -*/ -if (numa_cpus) { - cpu =scx_pick_idle_cpu_from_node (node, numa_cpus,SCX_PICK_IDLE_CORE ); -if (cpu >=0 ) - goto cpu_found; - } -/* * Search for any full idle core usable by the task. */
@@ -3528,15 +3492,6 @@ static s32 scx_select_cpu_dfl(struct task_struct *p, s32 prev_cpu, goto cpu_found; } -/* -* Search for any idle CPU in the same NUMA node. -*/ -if (numa_cpus) { - cpu =scx_pick_idle_cpu_from_node (node, numa_cpus,0 ); -if (cpu >=0 ) - goto cpu_found; - } -/* * Search for any idle CPU usable by the task. */
Signature · 1 line
2.47.1