Skip to contentSkip to conversation

MT8516/MT8167 dtsi fixes

PATCH Applied Val Packett 2 participants 15 messages Dec 4, 2024 – Dec 10, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover MT8516/MT8167 dtsi fixes

Hi everyone,

I've been working on mainline bringup on an MT8167 tablet I found at a junkyard sale (lenovo,tb7304f) for postmarketOS :3

This first series consists of basic device tree fixes for the MT8516 dtsi that the MT8167 one inherits from.

The changes that follow add support for the MT6392 PMIC, and that's mostly been implemented by Fabien Parent back in 2020 and not merged:

<https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/>
<https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/>

but I have a couple changes on top of those patches (like adding the missing mt6392_set_buck_vosel_reg). I'm wondering what the best way to get this in would be, should I squash my changes and submit the "final" patches with a Co-developed-by tag?

(Similar situation with DRM nodes, not merged due to "concerns about the driver architecture" in 2021, now missing GCE/CMDQ mailbox props:
<https://lore.kernel.org/[email protected]/>)

By the way, is anyone familiar with PSCI cpuidle/hot-unplug issues on Mediatek Android devices from around this time? Specifically on this tablet, I can't make the cores come back from suspend. I have investigated local-timer-stop and arm,no-tick-in-suspend, Fabien pointed me to the mediatek timer and its required clocks, but nothing helped. Trying the psci_checker, I realized that it's not just suspend: they do not come back from hot-unplug either. Initial CPU_ON on boot is fine, but then after a CPU_OFF they do not actually come back when CPU_ON supposedly turns them on. Now I can't help but notice that the only DTS in mainline for a device that came with Android, mt6795-sony-xperia-m5, does not have any cpuidle nodes in its SoC's dtsi either..

Val Packett (5):
arm64: dts: mediatek: mt8516: fix GICv2 range
arm64: dts: mediatek: mt8516: fix wdt irq type
arm64: dts: mediatek: mt8516: add i2c clock-div property
arm64: dts: mediatek: mt8516: reserve 192 KiB for TF-A
arm64: dts: mediatek: mt8516: add keypad node

 arch/arm64/boot/dts/mediatek/mt8516.dtsi      | 21 +++++++++++++++----
 .../boot/dts/mediatek/pumpkin-common.dtsi     |  2 --
 2 files changed, 17 insertions(+), 6 deletions(-)
Signature · 1 line
2.47.1
#1 lore raw

PATCH 1/5 arm64: dts: mediatek: mt8516: fix GICv2 range

On the MT8167 which is based on the MT8516 DTS, the following error was appearing on boot, breaking interrupt operation:

GICv2 detected, but range too small and irqchip.gicv2_force_probe not set

Similar to what's been proposed for MT7622 which has the same issue, fix by using the range reported by force_probe.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +1 -1
index d0b03dc4d3f4..444429341302 100644
@@ -268,7 +268,7 @@ gic: interrupt-controller@10310000 {
 			interrupt-parent = <&gic>;
 			interrupt-controller;
 			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
 			      <0 0x10340000 0 0x2000>,
 			      <0 0x10360000 0 0x2000>;
 			interrupts = <GIC_PPI 9
Signature · 1 line
2.47.1
maintainer Reviewed-by on v1 1/5
#2 lore raw

Re: [PATCH 1/5] arm64: dts: mediatek: mt8516: fix GICv2 range

Il 04/12/24 20:05, Val Packett ha scritto:

Quoted 11 lines

On the MT8167 which is based on the MT8516 DTS, the following error was appearing on boot, breaking interrupt operation:

GICv2 detected, but range too small and irqchip.gicv2_force_probe not set

Similar to what's been proposed for MT7622 which has the same issue, fix by using the range reported by force_probe.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")

Yeah, that's fine, I agree.

Quoted 17 lines
---
  arch/arm64/boot/dts/mediatek/mt8516.dtsi | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +1 -1
index d0b03dc4d3f4..444429341302 100644
@@ -268,7 +268,7 @@ gic: interrupt-controller@10310000 {
  			interrupt-parent = <&gic>;
  			interrupt-controller;
  			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
  			      <0 0x10340000 0 0x2000>,
  			      <0 0x10360000 0 0x2000>;
  			interrupts = <GIC_PPI 9
#3 lore raw

PATCH 2/5 arm64: dts: mediatek: mt8516: fix wdt irq type

In reply to Val Packett

The GICv2 does not support EDGE_FALLING interrupts, so the watchdog would refuse to attach due to a failing check coming from the GIC driver.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +1 -1
index 444429341302..098c32ebf678 100644
@@ -206,7 +206,7 @@ watchdog@10007000 {
 			compatible = "mediatek,mt8516-wdt",
 				     "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 			#reset-cells = <1>;
 		};
 
Signature · 1 line
2.47.1
maintainer Reviewed-by on v1 2/5
#4 lore raw

Re: [PATCH 2/5] arm64: dts: mediatek: mt8516: fix wdt irq type

Il 04/12/24 20:05, Val Packett ha scritto:

Quoted 5 lines

The GICv2 does not support EDGE_FALLING interrupts, so the watchdog would refuse to attach due to a failing check coming from the GIC driver.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
Quoted 17 lines
---
  arch/arm64/boot/dts/mediatek/mt8516.dtsi | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +1 -1
index 444429341302..098c32ebf678 100644
@@ -206,7 +206,7 @@ watchdog@10007000 {
  			compatible = "mediatek,mt8516-wdt",
  				     "mediatek,mt6589-wdt";
  			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
  			#reset-cells = <1>;
  		};
 
#5 lore raw

PATCH 3/5 arm64: dts: mediatek: mt8516: add i2c clock-div property

In reply to Val Packett

Move the clock-div property from the pumpkin board dtsi to the SoC's since it belongs to the SoC itself and is required on other devices.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi         | 3 +++
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +3 -0
index 098c32ebf678..dd17d8a88c19 100644
@@ -344,6 +344,7 @@ i2c0: i2c@11009000 {
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -358,6 +359,7 @@ i2c1: i2c@1100a000 {
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -372,6 +374,7 @@ i2c2: i2c@1100b000 {
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +0 -2
index ec8dfb3d1c6d..a356db5fcc5f 100644
@@ -47,7 +47,6 @@ key-volume-down {
 };
 
 &i2c0 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
@@ -156,7 +155,6 @@ cam-pwdn-hog {
 };
 
 &i2c2 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
Signature · 1 line
2.47.1
maintainer Reviewed-by on v1 3/5
#6 lore raw

Re: [PATCH 3/5] arm64: dts: mediatek: mt8516: add i2c clock-div property

Il 04/12/24 20:05, Val Packett ha scritto:

Quoted 5 lines

Move the clock-div property from the pumpkin board dtsi to the SoC's since it belongs to the SoC itself and is required on other devices.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
#7 lore raw

PATCH 4/5 arm64: dts: mediatek: mt8516: reserve 192 KiB for TF-A

In reply to Val Packett

The Android DTB for the related MT8167 reserves 0x30000. This is likely correct for MT8516 Android devices as well, and there's never any harm in reserving 64KiB more.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +2 -2
index dd17d8a88c19..e30623ebac0e 100644
@@ -144,10 +144,10 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
-		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@43000000 {
 			no-map;
-			reg = <0 0x43000000 0 0x20000>;
+			reg = <0 0x43000000 0 0x30000>;
 		};
 	};
 
Signature · 1 line
2.47.1
maintainer Reviewed-by on v1 4/5
#8 lore raw

Re: [PATCH 4/5] arm64: dts: mediatek: mt8516: reserve 192 KiB for TF-A

Il 04/12/24 20:05, Val Packett ha scritto:

Quoted 6 lines

The Android DTB for the related MT8167 reserves 0x30000. This is likely correct for MT8516 Android devices as well, and there's never any harm in reserving 64KiB more.

Fixes 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516")

That has changed over time with new bootloaders, yes, so there's no harm and it's actually a necessary change.

#9 lore raw

PATCH 5/5 arm64: dts: mediatek: mt8516: add keypad node

In reply to Val Packett

Add a keypad matrix node for the MT8516/MT8167 SoC.

---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +10 -0
index e30623ebac0e..3beb9f74ec79 100644
@@ -220,6 +220,16 @@ timer: timer@10008000 {
 			clock-names = "clk13m", "bus";
 		};
 
+		keypad: keypad@10002000 {
+			compatible = "mediatek,mt6779-keypad";
+			reg = <0 0x10002000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
 		syscfg_pctl: syscfg-pctl@10005000 {
 			compatible = "syscon";
 			reg = <0 0x10005000 0 0x1000>;
Signature · 1 line
2.47.1
#10 lore raw

Re: [PATCH 5/5] arm64: dts: mediatek: mt8516: add keypad node

Il 04/12/24 20:05, Val Packett ha scritto:

Quoted 12 lines

Add a keypad matrix node for the MT8516/MT8167 SoC.

---
  arch/arm64/boot/dts/mediatek/mt8516.dtsi | 10 ++++++++++
  1 file changed, 10 insertions(+)
arch/arm64/boot/dts/mediatek/mt8516.dtsi +0 -0
index e30623ebac0e..3beb9f74ec79 100644

arch/arm64/boot/dts/mediatek/mt8516.dtsi timer: timer@10008000 { · line 224

Quoted 5 lines
arch/arm64/boot/dts/mediatek/mt8516.dtsi +2 -0
@@ -220,6 +220,16 @@ timer: timer@10008000 {
  			clock-names = "clk13m", "bus";
  		};
 
+		keypad: keypad@10002000 {
+			compatible = "mediatek,mt6779-keypad";

Noupe, you have to add your SoC to the compatible list... both here and in the binding for mediatek.mt6779-keypad.yaml

compatible = "mediatek,mt8516-keypad", "mediatek,mt6779-keypad"

for the binding, it's just a simple addition to an enum, nothing else.

Cheers,
Angelo

Quoted 11 lines
arch/arm64/boot/dts/mediatek/mt8516.dtsi +8 -0
+			reg = <0 0x10002000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
  		syscfg_pctl: syscfg-pctl@10005000 {
  			compatible = "syscon";
  			reg = <0 0x10005000 0 0x1000>;
#11 lore raw
In reply to Val Packett

Il 04/12/24 20:05, Val Packett ha scritto:

Quoted 8 lines

Hi everyone,

I've been working on mainline bringup on an MT8167 tablet I found at a junkyard sale (lenovo,tb7304f) for postmarketOS :3

This first series consists of basic device tree fixes for the MT8516 dtsi that the MT8167 one inherits from.

...Yes, but I don't see any patch that is introducing your TB7304F device here.

I strongly suggest you to also send one that achieves basic boot with UART console as a first step for upstreaming your board, and then go for incremental changes everytime you get a new feature working.

Quoted 11 lines

The changes that follow add support for the MT6392 PMIC, and that's mostly been implemented by Fabien Parent back in 2020 and not merged:

<https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/>
<https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/>

but I have a couple changes on top of those patches (like adding the missing mt6392_set_buck_vosel_reg). I'm wondering what the best way to get this in would be, should I squash my changes and submit the "final" patches with a Co-developed-by tag?

Generally, if the patches are only simple additions, you could send the original patches without any author variation (and fixing that MT6392_IRQ_numbers enum in the original ones because lower case please!) and then your patches on top with your additions.

Otherwise, if you're "changing a lot of stuff" it makes sense to grab authorship and add the Co-Developed-by... but I don't think you're changing much, honestly.

Of course, you'll have to drop the TXT additions, as now they are YAML (where the YAML additions go to a separated dt-bindings patch!).

In the end, it's your choice - that's more or less a gist of how to do it.

Quoted 4 lines

(Similar situation with DRM nodes, not merged due to "concerns about the driver architecture" in 2021, now missing GCE/CMDQ mailbox props:
<https://lore.kernel.org/[email protected]/>)

The upstream driver just gained support for configuring the display paths entirely in the devicetree as those are obviously device specific.

You can make use of that for upstreaming your tablet after adding the display nodes (and bindings, if required) as if you go for the default configuration that's probably not going to work because it's for the pumpkin boards which will most probably have a different display pipeline compared to your board.

Quoted 12 lines

By the way, is anyone familiar with PSCI cpuidle/hot-unplug issues on Mediatek Android devices from around this time? Specifically on this tablet, I can't make the cores come back from suspend. I have investigated local-timer-stop and arm,no-tick-in-suspend, Fabien pointed me to the mediatek timer and its required clocks, but nothing helped. Trying the psci_checker, I realized that it's not just suspend: they do not come back from hot-unplug either. Initial CPU_ON on boot is fine, but then after a CPU_OFF they do not actually come back when CPU_ON supposedly turns them on. Now I can't help but notice that the only DTS in mainline for a device that came with Android, mt6795-sony-xperia-m5, does not have any cpuidle nodes in its SoC's dtsi either..

I did have some issues with an older bootloader on the Xperia M5 smartphone and would even lock up at boot, because on the old firmwares the power domains for the CPUs are not managed automatically by FW.

Before discovering that there was new FW (and this stuff is signed so you cannot cross-flash...) I did engineer a solution, but never upstreamed it because I did effectively lack time to clean it up and make it proper.

This solution is not upstreamable, as it makes the mtk-pm-domains driver to be usable only as built-in and not as module anymore... so that would probably need a separated driver or something like that.

Here's the (rather dirty, but working) code: https://gitlab.collabora.com/google/chromeos-kernel/-/commit/ae8f7048aadac03037391a64d9d79ca5af7b7a77

Cheers!
Angelo

Quoted 11 lines

Val Packett (5):
arm64: dts: mediatek: mt8516: fix GICv2 range
arm64: dts: mediatek: mt8516: fix wdt irq type
arm64: dts: mediatek: mt8516: add i2c clock-div property
arm64: dts: mediatek: mt8516: reserve 192 KiB for TF-A
arm64: dts: mediatek: mt8516: add keypad node

  arch/arm64/boot/dts/mediatek/mt8516.dtsi      | 21 +++++++++++++++----
  .../boot/dts/mediatek/pumpkin-common.dtsi     |  2 --
  2 files changed, 17 insertions(+), 6 deletions(-)
#12 lore raw
Quoted 3 lines · AngeloGioacchino Del Regno
Quoted 1 line

I strongly suggest you to also send one that achieves basic boot with UART console

as a first step for upstreaming your board, and then go for incremental changes everytime you get a new feature working.

Wanted to get the PMIC in first but sure, could try splitting out the initial version without the PMIC.

Oh! One dts/dtsi question: pretty much all MTK devices so far have all pinctrl configurations defined per-device. But on this SoC, pin assignments have their "canonical" function in the pin name e.g.: MT8167_PIN_58_SDA0__FUNC_SDA0_0 and on this device they are used as-is. Would it be fine to place these default pinctrl configs for SD/MMC, I2C etc. in the SoC dtsi?

Quoted 4 lines
Quoted 1 line

Generally, if the patches are only simple additions, you could send the original

patches without any author variation (and fixing that MT6392_IRQ_numbers enum in the original ones because lower case please!) and then your patches on top with your additions.

Right, I was mostly unsure if the email workflow supported just sending someone else's patches, but I guess that was silly - of course git-send-email should do the right thing!

Quoted 7 lines

The upstream driver just gained support for configuring the display paths entirely in the devicetree as those are obviously device specific.

You can make use of that for upstreaming your tablet after adding the display nodes (and bindings, if required) as if you go for the default configuration that's probably not going to work because it's for the pumpkin boards which will most probably have a different display pipeline compared to your board.

The pipeline seems to be the same.. The pumpkin board was brought up with DSI as well, the main pipeline I can find in the Android source is the same (+ PWM).

I am still struggling to get it to work though: DSI command mode configuration gets acknowledged fine, but in burst mode, the vblank never arrives. Tried fiddling with various things (CMDQ or not, mutex as vblank source since there was an Android commit doing that, etc.), nothing helped.

Quoted 6 lines
Quoted 2 lines

By the way, is anyone familiar with PSCI cpuidle/hot-unplug issues on Mediatek Android devices from around this time? [..]

I did have some issues with an older bootloader on the Xperia M5 smartphone and would even lock up at boot, because on the old firmwares the power domains for the CPUs are not managed automatically by FW.

Interesting, thanks for the pointer!

In the Android kernel sources I could find though, there are no CPU domains in the mtk-scpsys-mt8167 driver, and the only references I could even find to the related register bits are from code that *reads* the status of the CPU power domains to make decisions about sleep states (only_one_cpu_online in mtk_idle). Trying to add those to the driver anyway, did not succeed so far.

~val

#13 lore raw

Il 07/12/24 04:11, Val Packett ha scritto:

Quoted 8 lines · AngeloGioacchino Del Regno
Quoted 3 lines
Quoted 1 line

I strongly suggest you to also send one that achieves basic boot with UART console

as a first step for upstreaming your board, and then go for incremental changes everytime you get a new feature working.

Wanted to get the PMIC in first but sure, could try splitting out the initial version without the PMIC.

We all want to get XYZ in first, but then, you'll see that sometimes having at least something will help you justify other changes....

If there's nothing upstream, understanding your changes becomes increasingly difficult (depending on the nature of those changes, of course) - so... just take the advice: sending the initial DT will help you later in the process ;-)

Quoted 2 lines

Oh! One dts/dtsi question: pretty much all MTK devices so far have all pinctrl configurations defined per-device. But on this SoC, pin assignments have their "canonical" function in the pin name e.g.: MT8167_PIN_58_SDA0__FUNC_SDA0_0 and on this device they are used as-is. Would it be fine to place these default pinctrl configs for SD/MMC, I2C etc. in the SoC dtsi?

No, because even though this is the default on many boards, it's still something board specific, as other boards may define different functions.

Please define that in your board DT.

Quoted 10 lines
Quoted 4 lines
Quoted 1 line

Generally, if the patches are only simple additions, you could send the original

patches without any author variation (and fixing that MT6392_IRQ_numbers enum in the original ones because lower case please!) and then your patches on top with your additions.

Right, I was mostly unsure if the email workflow supported just sending someone else's patches, but I guess that was silly - of course git-send-email should do the right thing!

Quoted 3 lines

The upstream driver just gained support for configuring the display paths entirely in the devicetree as those are obviously device specific.

Quoted 9 lines
Quoted 4 lines

You can make use of that for upstreaming your tablet after adding the display nodes (and bindings, if required) as if you go for the default configuration that's probably not going to work because it's for the pumpkin boards which will most probably have a different display pipeline compared to your board.

The pipeline seems to be the same.. The pumpkin board was brought up with DSI as well, the main pipeline I can find in the Android source is the same (+ PWM).

I am still struggling to get it to work though: DSI command mode configuration gets acknowledged fine, but in burst mode, the vblank never arrives. Tried fiddling with various things (CMDQ or not, mutex as vblank source since there was an Android commit doing that, etc.), nothing helped.

DSI command mode is not supported upstream - only video mode... and that's why you can't get your display to work. There's no WDMA driver...

Convert it to video mode and it's gonna work just perfect :-)

P.S.: Also check if your mmsys+mutex configuration is correct!

Quoted 11 lines
Quoted 6 lines
Quoted 2 lines

By the way, is anyone familiar with PSCI cpuidle/hot-unplug issues on Mediatek Android devices from around this time? [..]

I did have some issues with an older bootloader on the Xperia M5 smartphone and would even lock up at boot, because on the old firmwares the power domains for the CPUs are not managed automatically by FW.

Interesting, thanks for the pointer!

In the Android kernel sources I could find though, there are no CPU domains in the mtk-scpsys-mt8167 driver, and the only references I could even find to the related register bits are from code that *reads* the status of the CPU power domains to make decisions about sleep states (only_one_cpu_online in mtk_idle). Trying to add those to the driver anyway, did not succeed so far.

Downstream, you will find references to "mtcmos" (or anyway cpu mtcmos) - that's how power domains are called there (I think. At least, in older downstream kernels that's how they're called - and that's the "real" hw name btw).

Cheers,
Angelo

Quoted 4 lines

~val

maintainer Applied
#14 lore raw

Re: (subset) [PATCH 0/5] MT8516/MT8167 dtsi fixes

In reply to Val Packett
Quoted 10 lines · Val Packett

I've been working on mainline bringup on an MT8167 tablet I found at a junkyard sale (lenovo,tb7304f) for postmarketOS :3

This first series consists of basic device tree fixes for the MT8516 dtsi that the MT8167 one inherits from.

The changes that follow add support for the MT6392 PMIC, and that's mostly been implemented by Fabien Parent back in 2020 and not merged:

[...]

Applied to v6.13-next/dts64, thanks!

[1/5] arm64: dts: mediatek: mt8516: fix GICv2 range

      commit: e3ee31e4409f051c021a30122f3c470f093a7386
[2/5] arm64: dts: mediatek: mt8516: fix wdt irq type
      commit: 03a80442030e7147391738fb6cbe5fa0b3b91bb1
[3/5] arm64: dts: mediatek: mt8516: add i2c clock-div property
      commit: eb72341fd92b7af510d236e5a8554d855ed38d3c
[4/5] arm64: dts: mediatek: mt8516: reserve 192 KiB for TF-A
      commit: 2561c7d5d497b988deccc36fe5eac7fd50b937f8

Cheers,
Angelo