Skip to contentSkip to conversation

firewire: ohci: use generic power management

PATCH In review Vaibhav Gupta 3 participants 4 messages Jul 20, 2020 – Dec 10, 2024 Firewire

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 firewire: ohci: use generic power management

Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers.

With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs.

This driver makes use of PCI helper functions like pci_save/restore_state(), pci_disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed.

Change function parameter in both .suspend() and .resume() to "struct device*" type. Use to_pci_dev() to get "struct pci_dev*" variable.

Compile-tested only.

---
 drivers/firewire/ohci.c | 43 ++++++++++++-----------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)
drivers/firewire/ohci.c +12 -31
index 54fdc39cd0bc..2d19db5e81a1 100644
@@ -3169,8 +3169,7 @@ static int ohci_set_iso_channels(struct fw_iso_context *base, u64 *channels)
 	return ret;
 }
 
-#ifdef CONFIG_PM
-static void ohci_resume_iso_dma(struct fw_ohci *ohci)
+static void __maybe_unused ohci_resume_iso_dma(struct fw_ohci *ohci)
 {
 	int i;
 	struct iso_context *ctx;
@@ -3187,7 +3186,6 @@ static void ohci_resume_iso_dma(struct fw_ohci *ohci)
 			ohci_start_iso(&ctx->base, 0, ctx->sync, ctx->tags);
 	}
 }
-#endif
 
 static int queue_iso_transmit(struct iso_context *ctx,
 			      struct fw_iso_packet *packet,
@@ -3793,39 +3791,24 @@ static void pci_remove(struct pci_dev *dev)
 	dev_notice(&dev->dev, "removed fw-ohci device\n");
 }
 
-#ifdef CONFIG_PM
-static int pci_suspend(struct pci_dev *dev, pm_message_t state)
+static int __maybe_unused pci_suspend(struct device *dev)
 {
-	struct fw_ohci *ohci = pci_get_drvdata(dev);
-	int err;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct fw_ohci *ohci = pci_get_drvdata(pdev);
 
 	software_reset(ohci);
-	err = pci_save_state(dev);
-	if (err) {
-		ohci_err(ohci, "pci_save_state failed\n");
-		return err;
-	}
-	err = pci_set_power_state(dev, pci_choose_state(dev, state));
-	if (err)
-		ohci_err(ohci, "pci_set_power_state failed with %d\n", err);
-	pmac_ohci_off(dev);
+	pmac_ohci_off(pdev);
 
 	return 0;
 }
 
-static int pci_resume(struct pci_dev *dev)
+static int __maybe_unused pci_resume(struct device *dev)
 {
-	struct fw_ohci *ohci = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct fw_ohci *ohci = pci_get_drvdata(pdev);
 	int err;
 
-	pmac_ohci_on(dev);
-	pci_set_power_state(dev, PCI_D0);
-	pci_restore_state(dev);
-	err = pci_enable_device(dev);
-	if (err) {
-		ohci_err(ohci, "pci_enable_device failed\n");
-		return err;
-	}
+	pmac_ohci_on(pdev);
 
 	/* Some systems don't setup GUID register on resume from ram  */
 	if (!reg_read(ohci, OHCI1394_GUIDLo) &&
@@ -3842,7 +3825,6 @@ static int pci_resume(struct pci_dev *dev)
 
 	return 0;
 }
-#endif
 
 static const struct pci_device_id pci_table[] = {
 	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) },
@@ -3851,15 +3833,14 @@ static const struct pci_device_id pci_table[] = {
 
 MODULE_DEVICE_TABLE(pci, pci_table);
 
+static SIMPLE_DEV_PM_OPS(pci_pm_ops, pci_suspend, pci_resume);
+
 static struct pci_driver fw_ohci_pci_driver = {
 	.name		= ohci_driver_name,
 	.id_table	= pci_table,
 	.probe		= pci_probe,
 	.remove		= pci_remove,
-#ifdef CONFIG_PM
-	.resume		= pci_resume,
-	.suspend	= pci_suspend,
-#endif
+	.driver.pm	= &pci_pm_ops,
 };
 
 static int __init fw_ohci_init(void)
Signature · 1 line
2.27.0
maintainer
#1 lore raw

Hi,

Quoted 13 lines · Vaibhav Gupta

Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers.

With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs.

This driver makes use of PCI helper functions like pci_save/restore_state(), pci_disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed.

Change function parameter in both .suspend() and .resume() to "struct device*" type. Use to_pci_dev() to get "struct pci_dev*" variable.

Quoted 6 lines

Compile-tested only.

---
 drivers/firewire/ohci.c | 43 ++++++++++++-----------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)

Although it takes a long time since the patch was posted, I applied it now to for-next branch with my handy changes to optimize to v6.13-rc1.

I still have a slight concern about the operation specific to powermac platforms, however let us fix when receiving any reports from the users.

Regards

Takashi Sakamoto

#2 lore raw
Quoted 16 lines · Takashi Sakamoto
Quoted 15 lines · Vaibhav Gupta

Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers.

With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs.

This driver makes use of PCI helper functions like pci_save/restore_state(), pci_disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed.

Change function parameter in both .suspend() and .resume() to "struct device*" type. Use to_pci_dev() to get "struct pci_dev*" variable.

Compile-tested only.

Quoted 7 lines
Quoted 4 lines
---
 drivers/firewire/ohci.c | 43 ++++++++++++-----------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)

Although it takes a long time since the patch was posted, I applied it now to for-next branch with my handy changes to optimize to v6.13-rc1.

Great! Thanks very much for rescuing this patch! We still have a couple stragglers, but we may yet be able to retire the legacy PCI power management.

Quoted 2 lines

I still have a slight concern about the operation specific to powermac platforms, however let us fix when receiving any reports from the users.

Please let us know if/when you see any reports, and we'll be happy to help fix them.

Bjorn

#3 lore raw
In reply to Takashi Sakamoto
Quoted 27 lines · Takashi Sakamoto

Hi,

Quoted 13 lines · Vaibhav Gupta

Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers.

With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs.

This driver makes use of PCI helper functions like pci_save/restore_state(), pci_disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed.

Change function parameter in both .suspend() and .resume() to "struct device*" type. Use to_pci_dev() to get "struct pci_dev*" variable.

Quoted 6 lines

Compile-tested only.

---
 drivers/firewire/ohci.c | 43 ++++++++++++-----------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)

Although it takes a long time since the patch was posted, I applied it now to for-next branch with my handy changes to optimize to v6.13-rc1.

Quoted 7 lines

I still have a slight concern about the operation specific to powermac platforms, however let us fix when receiving any reports from the users.

Regards

Takashi Sakamoto

Hey Takashi,

Thank you so much! One more step closer to getting rid of legacy stuff.

Yes, I will also keep a look on the mailing list for if someone reports an issue.

Best
Vaibhav Gupta