move per-vma lock into vm_area_struct
Subsystems (6)
Suren Baghdasaryan
maintainercover move per-vma lock into vm_area_struct
Back when per-vma locks were introduces, vm_lock was moved out of vm_area_struct in [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
This patchset moves vm_lock back into vm_area_struct, aligning it at the cacheline boundary and changing the cache to be cache-aligned as well. This causes VMA memory consumption to grow from 160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:
slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock ... 40 102 1 : ...
vm_area_struct ... 160 51 2 : ...
slabinfo after moving vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct ... 256 32 2 : ...
Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages, which is 5.5MB per 100000 VMAs.
To minimize memory overhead, vm_lock implementation is changed from using rw_semaphore (40 bytes) to an atomic (8 bytes) and several vm_area_struct members are moved into the last cacheline, resulting in a less fragmented structure:
struct vm_area_struct {
union {
struct {
long unsigned int vm_start; /* 0 8 */
long unsigned int vm_end; /* 8 8 */
}; /* 0 16 */
struct callback_head vm_rcu ; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
struct mm_struct * vm_mm; /* 16 8 */
pgprot_t vm_page_prot; /* 24 8 */
union {
const vm_flags_t vm_flags; /* 32 8 */
vm_flags_t __vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 */
/* XXX 3 bytes hole, try to pack */
unsigned int vm_lock_seq; /* 44 4 */
struct list_head anon_vma_chain; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct anon_vma * anon_vma; /* 64 8 */
const struct vm_operations_struct * vm_ops; /* 72 8 */
long unsigned int vm_pgoff; /* 80 8 */
struct file * vm_file; /* 88 8 */
void * vm_private_data; /* 96 8 */
atomic_long_t swap_readahead_info; /* 104 8 */
struct mempolicy * vm_policy; /* 112 8 */
/* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
struct vma_lock vm_lock (__aligned__(64)); /* 128 4 */
/* XXX 4 bytes hole, try to pack */
struct {
struct rb_node rb (__aligned__(8)); /* 136 24 */
long unsigned int rb_subtree_last; /* 160 8 */
} __attribute__((__aligned__(8))) shared; /* 136 32 */
struct vm_userfaultfd_ctx vm_userfaultfd_ctx; /* 168 0 */
/* size: 192, cachelines: 3, members: 17 */
/* sum members: 153, holes: 3, sum holes: 15 */
/* padding: 24 */
/* forced alignments: 3, forced holes: 2, sum forced holes: 12 */
} __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages, saving 2 pages compared to the 50 pages in the baseline:
slabinfo after vm_area_struct changes:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct ... 192 42 2 : ...
Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/
Suren Baghdasaryan (4):
mm: introduce vma_start_read_locked{_nested} helpers
mm: move per-vma lock into vm_area_struct
mm: replace rw_semaphore with atomic_t in vma_lock
mm: move lesser used vma_area_struct members into the last cacheline
include/linux/mm.h | 163 +++++++++++++++++++++++++++++++++++--- include/linux/mm_types.h | 59 +++++++++----- include/linux/mmap_lock.h | 3 + kernel/fork.c | 50 ++---------- mm/init-mm.c | 2 + mm/userfaultfd.c | 14 ++-- 6 files changed, 205 insertions(+), 86 deletions(-)
base-commit: 931086f2a88086319afb57cd3925607e8cda0a9f
Signature · 1 line
2.47.0.277.g8800431eea-goog
Suren Baghdasaryan
maintainerPATCH 1/4 mm: introduce vma_start_read_locked{_nested} helpers
Introduce helper functions which can be used to read-lock a VMA when holding mmap_lock for read. Replace direct accesses to vma->vm_lock with these new helpers.
--- include/linux/mm.h | 20 ++++++++++++++++++++ mm/userfaultfd.c | 14 ++++++-------- 2 files changed, 26 insertions(+), 8 deletions(-)
include/linux/mm.h +20 -0
@@ -722,6 +722,26 @@ static inline bool vma_start_read(struct vm_area_struct *vma)return true; } +/* +* Use only while holding mmap_read_lock which guarantees that nobody can lock +* the vma for write (vma_start_write()) from under us. +*/ +static inline void vma_start_read_locked_nested (struct vm_area_struct *vma,int subclass) +{ +mmap_assert_locked (vma->vm_mm); +down_read_nested (&vma->vm_lock->lock, subclass); +} + +/* +* Use only while holding mmap_read_lock which guarantees that nobody can lock +* the vma for write (vma_start_write()) from under us. +*/ +static inline void vma_start_read_locked (struct vm_area_struct *vma) +{ +mmap_assert_locked (vma->vm_mm); +down_read (&vma->vm_lock->lock); +} +static inline void vma_end_read (struct vm_area_struct *vma) {rcu_read_lock ();/* keeps vma alive till the end of up_read */
mm/userfaultfd.c +6 -8
@@ -86,13 +86,11 @@ static struct vm_area_struct *uffd_lock_vma(struct mm_struct *mm, vma =find_vma_and_prepare_anon (mm, address);if (!IS_ERR (vma)) {/* +* While holding mmap_lock we can't fail * We cannot use vma_start_read() as it may fail due to -* false locked (see comment in vma_start_read()). We -* can avoid that by directly locking vm_lock under -* mmap_lock, which guarantees that nobody can lock the -* vma for write (vma_start_write()) under us. +* false locked (see comment in vma_start_read()). */ -down_read (&vma->vm_lock->lock); +vma_start_read_locked (vma); }mmap_read_unlock (mm);
@@ -1480,10 +1478,10 @@ static int uffd_move_lock(struct mm_struct *mm,* See comment in uffd_lock_vma() as to why not using * vma_start_read() here. */ -down_read (&(*dst_vmap)->vm_lock->lock); +vma_start_read_locked (*dst_vmap);if (*dst_vmap != *src_vmap) -down_read_nested (&(*src_vmap)->vm_lock->lock, -SINGLE_DEPTH_NESTING ); +vma_start_read_locked_nested (*src_vmap, +SINGLE_DEPTH_NESTING ); }mmap_read_unlock (mm);return err;
Signature · 1 line
2.47.0.277.g8800431eea-goog
Suren Baghdasaryan
maintainerPATCH 2/4 mm: move per-vma lock into vm_area_struct
In reply to Suren BaghdasaryanBack when per-vma locks were introduces, vm_lock was moved out of vm_area_struct in [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
This patchset moves vm_lock back into vm_area_struct, aligning it at the cacheline boundary and changing the cache to be cache-aligned as well. This causes VMA memory consumption to grow from 160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:
slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock ... 40 102 1 : ...
vm_area_struct ... 160 51 2 : ...
slabinfo after moving vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct ... 256 32 2 : ...
Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages, which is 5.5MB per 100000 VMAs. This memory consumption growth will be addressed in the patches that follow.
[1] https://lore.kernel.org/all/[email protected]/T/#m861679f3fe0e22c945d6334b88dc996fef5ea6cc
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/
--- include/linux/mm.h | 27 ++++++++++++---------- include/linux/mm_types.h | 6 +++-- kernel/fork.c | 50 +++++----------------------------------- 3 files changed, 25 insertions(+), 58 deletions(-)
include/linux/mm.h +15 -12
@@ -684,6 +684,11 @@ static inline void vma_numab_state_free(struct vm_area_struct *vma) {}#endif /* CONFIG_NUMA_BALANCING */ #ifdef CONFIG_PER_VMA_LOCK +static inline void vma_lock_init (struct vma_lock *vm_lock) +{ +init_rwsem (&vm_lock->lock); +} +/* * Try to read-lock a vma. The function is allowed to occasionally yield false * locked result to avoid performance overhead, in which case we fall back to
@@ -701,7 +706,7 @@ static inline bool vma_start_read(struct vm_area_struct *vma)if (READ_ONCE (vma->vm_lock_seq) ==READ_ONCE (vma->vm_mm->mm_lock_seq.sequence))return false; -if (unlikely (down_read_trylock (&vma->vm_lock->lock) ==0 )) +if (unlikely (down_read_trylock (&vma->vm_lock.lock) ==0 ))return false;/*
@@ -716,7 +721,7 @@ static inline bool vma_start_read(struct vm_area_struct *vma)* This pairs with RELEASE semantics in vma_end_write_all(). */ if (unlikely (vma->vm_lock_seq ==raw_read_seqcount (&vma->vm_mm->mm_lock_seq))) { -up_read (&vma->vm_lock->lock); +up_read (&vma->vm_lock.lock);return false; }return true;
@@ -729,7 +734,7 @@ static inline bool vma_start_read(struct vm_area_struct *vma)static inline void vma_start_read_locked_nested (struct vm_area_struct *vma,int subclass) {mmap_assert_locked (vma->vm_mm); -down_read_nested (&vma->vm_lock->lock, subclass); +down_read_nested (&vma->vm_lock.lock, subclass); }/*
@@ -739,13 +744,13 @@ static inline void vma_start_read_locked_nested(struct vm_area_struct *vma, intstatic inline void vma_start_read_locked (struct vm_area_struct *vma) {mmap_assert_locked (vma->vm_mm); -down_read (&vma->vm_lock->lock); +down_read (&vma->vm_lock.lock); }static inline void vma_end_read (struct vm_area_struct *vma) {rcu_read_lock ();/* keeps vma alive till the end of up_read */ -up_read (&vma->vm_lock->lock); +up_read (&vma->vm_lock.lock);rcu_read_unlock (); }
@@ -774,7 +779,7 @@ static inline void vma_start_write(struct vm_area_struct *vma)if (__is_vma_write_locked (vma, &mm_lock_seq))return ; -down_write (&vma->vm_lock->lock); +down_write (&vma->vm_lock.lock);/* * We should use WRITE_ONCE() here because we can have concurrent reads * from the early lockless pessimistic check in vma_start_read().
@@ -782,7 +787,7 @@ static inline void vma_start_write(struct vm_area_struct *vma)* we should use WRITE_ONCE() for cleanliness and to keep KCSAN happy. */ WRITE_ONCE (vma->vm_lock_seq, mm_lock_seq); -up_write (&vma->vm_lock->lock); +up_write (&vma->vm_lock.lock); }static inline void vma_assert_write_locked (struct vm_area_struct *vma)
@@ -794,7 +799,7 @@ static inline void vma_assert_write_locked(struct vm_area_struct *vma)static inline void vma_assert_locked (struct vm_area_struct *vma) { -if (!rwsem_is_locked (&vma->vm_lock->lock)) +if (!rwsem_is_locked (&vma->vm_lock.lock))vma_assert_write_locked (vma); }
@@ -861,10 +866,6 @@ static inline void assert_fault_locked(struct vm_fault *vmf)extern const struct vm_operations_struct vma_dummy_vm_ops; -/* -* WARNING: vma_init does not initialize vma->vm_lock. -* Use vm_area_alloc()/vm_area_free() if vma needs locking. -*/ static inline void vma_init (struct vm_area_struct *vma,struct mm_struct *mm) {memset (vma,0 ,sizeof (*vma));
@@ -873,6 +874,8 @@ static inline void vma_init(struct vm_area_struct *vma, struct mm_struct *mm)INIT_LIST_HEAD (&vma->anon_vma_chain);vma_mark_detached (vma, false);vma_numab_state_init (vma); +vma_lock_init (&vma->vm_lock); + vma->vm_lock_seq =UINT_MAX ; }/* Use when VMA is not part of the VMA tree and needs no locking */
include/linux/mm_types.h +4 -2
@@ -716,8 +716,6 @@ struct vm_area_struct {* slowpath. */ unsigned int vm_lock_seq; -/* Unstable RCU readers are allowed to read this. */ -struct vma_lock *vm_lock;#endif /*
@@ -770,6 +768,10 @@ struct vm_area_struct {struct vma_numab_state *numab_state;/* NUMA Balancing state */ #endif struct vm_userfaultfd_ctx vm_userfaultfd_ctx; +#ifdef CONFIG_PER_VMA_LOCK +/* Unstable RCU readers are allowed to read this. */ +struct vma_lock vm_lock____cacheline_aligned_in_smp ; +#endif } __randomize_layout;#ifdef CONFIG_NUMA
kernel/fork.c +6 -44
86 lines not on this page · raw message
Signature · 1 line
2.47.0.277.g8800431eea-goog
kernel test robot
build botRe: [PATCH 2/4] mm: move per-vma lock into vm_area_struct
kernel test robot noticed the following build warnings:
Hi Suren,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 931086f2a88086319afb57cd3925607e8cda0a9f]
url: https://github.com/intel-lab-lkp/linux/commits/Suren-Baghdasaryan/mm-introduce-vma_start_read_locked-_nested-helpers/20241112-050531 base: 931086f2a88086319afb57cd3925607e8cda0a9f patch link: https://lore.kernel.org/r/20241111205506.3404479-3-surenb%40google.com patch subject: [PATCH 2/4] mm: move per-vma lock into vm_area_struct config: um-defconfig (https://download.01.org/0day-ci/archive/20241112/[email protected]/config) compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 592c0fe55f6d9a811028b5f3507be91458ab2713) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241112/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
| ^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:255:10: warning: array index 1 is past the end of the array (that has type 'unsigned long[1]') [-Warray-bounds]
255 | case 2: set->sig[1] = -1;
| ^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
24 | unsigned long sig[_NSIG_WORDS];
| ^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:2234:
include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
In file included from ipc/msg.c:33:
In file included from include/linux/security.h:35:
In file included from include/linux/bpf.h:31:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/um/include/asm/hardirq.h:5:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:548:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
548 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:561:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
561 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
In file included from ipc/msg.c:33:
In file included from include/linux/security.h:35:
In file included from include/linux/bpf.h:31:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/um/include/asm/hardirq.h:5:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:574:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
574 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
In file included from ipc/msg.c:33:
In file included from include/linux/security.h:35:
In file included from include/linux/bpf.h:31:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/um/include/asm/hardirq.h:5:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:585:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
585 | __raw_writeb(value, PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:595:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
595 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:605:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
605 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:693:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
693 | readsb(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:701:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
701 | readsw(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:709:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
709 | readsl(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:718:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
718 | writesb(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:727:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
727 | writesw(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:736:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
736 | writesl(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
>> ipc/msg.c:497:20: warning: implicit conversion from 'int' to 'unsigned short' changes value from 32768000 to 0 [-Wconstant-conversion]
497 | msginfo->msgseg = MSGSEG;
| ~ ^~~~~~
include/uapi/linux/msg.h:87:38: note: expanded from macro 'MSGSEG'
87 | #define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
| ^~~~~~~~
include/uapi/linux/msg.h:86:36: note: expanded from macro '__MSGSEG'
86 | #define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
| ~~~~~~~~~~~~~~~~~^~~~~~~~ 63 warnings and 3 errors generated.
--
In file included from drivers/tty/tty_port.c:8:
In file included from include/linux/tty.h:11:
In file included from include/linux/tty_port.h:5:
In file included from include/linux/kfifo.h:40:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:8:
include/linux/mm.h:877:2: error: call to undeclared function 'vma_lock_init'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
877 | vma_lock_init(&vma->vm_lock);
| ^
include/linux/mm.h:877:2: note: did you mean 'osq_lock_init'?
include/linux/osq_lock.h:23:20: note: 'osq_lock_init' declared here
23 | static inline void osq_lock_init(struct optimistic_spin_queue *lock)
| ^
In file included from drivers/tty/tty_port.c:8:
In file included from include/linux/tty.h:11:
In file included from include/linux/tty_port.h:5:
In file included from include/linux/kfifo.h:40:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:8:
include/linux/mm.h:877:22: error: no member named 'vm_lock' in 'struct vm_area_struct'
877 | vma_lock_init(&vma->vm_lock);
| ~~~ ^
include/linux/mm.h:878:7: error: no member named 'vm_lock_seq' in 'struct vm_area_struct'
878 | vma->vm_lock_seq = UINT_MAX;
| ~~~ ^
In file included from drivers/tty/tty_port.c:8:
In file included from include/linux/tty.h:11:
In file included from include/linux/tty_port.h:5:
In file included from include/linux/kfifo.h:40:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:8:
In file included from include/linux/mm.h:2234:
include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
In file included from drivers/tty/tty_port.c:8:
In file included from include/linux/tty.h:11:
In file included from include/linux/tty_port.h:5:
In file included from include/linux/kfifo.h:40:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:9:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:548:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
548 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:561:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
561 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
In file included from drivers/tty/tty_port.c:8:
In file included from include/linux/tty.h:11:
In file included from include/linux/tty_port.h:5:
In file included from include/linux/kfifo.h:40:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:9:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:574:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
574 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
In file included from drivers/tty/tty_port.c:8:
In file included from include/linux/tty.h:11:
In file included from include/linux/tty_port.h:5:
In file included from include/linux/kfifo.h:40:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:9:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:585:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
585 | __raw_writeb(value, PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:595:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
595 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:605:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
605 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:693:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
693 | readsb(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:701:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
701 | readsw(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:709:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
709 | readsl(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:718:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
718 | writesb(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:727:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
727 | writesw(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:736:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
736 | writesl(PCI_IOBASE + addr, buffer, count);
| ~~~~~~~~~~ ^
>> drivers/tty/tty_port.c:266:2: warning: implicit conversion from 'unsigned long' to 'unsigned int' changes value from 18446744073709551615 to 4294967295 [-Wconstant-conversion]
266 | INIT_KFIFO(port->xmit_fifo);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/kfifo.h:136:69: note: expanded from macro 'INIT_KFIFO'
136 | __kfifo->mask = __is_kfifo_ptr(__tmp) ? 0 : ARRAY_SIZE(__tmp->buf) - 1;\
| ~ ~~~~~~~~~~~~~~~~~~~~~~~^~~14 warnings and 3 errors generated.
vim +497 ipc/msg.c
a0d092fc2df845 Pierre Peiffer 2008-04-29 476
156d9ed1260ee5 Al Viro 2017-07-09 477 static int msgctl_info(struct ipc_namespace *ns, int msqid,
156d9ed1260ee5 Al Viro 2017-07-09 478 int cmd, struct msginfo *msginfo)
a0d092fc2df845 Pierre Peiffer 2008-04-29 479 {
2cafed30f150f7 Davidlohr Bueso 2013-07-08 480 int err;
27c331a1746142 Manfred Spraul 2018-08-21 481 int max_idx;
5a06a363ef4844 Ingo Molnar 2006-07-30 482
5a06a363ef4844 Ingo Molnar 2006-07-30 483 /*
5a06a363ef4844 Ingo Molnar 2006-07-30 484 * We must not return kernel stack data.
^1da177e4c3f41 Linus Torvalds 2005-04-16 485 * due to padding, it's not enough
^1da177e4c3f41 Linus Torvalds 2005-04-16 486 * to set all member fields.
^1da177e4c3f41 Linus Torvalds 2005-04-16 487 */
^1da177e4c3f41 Linus Torvalds 2005-04-16 488 err = security_msg_queue_msgctl(NULL, cmd);
^1da177e4c3f41 Linus Torvalds 2005-04-16 489 if (err)
^1da177e4c3f41 Linus Torvalds 2005-04-16 490 return err;
^1da177e4c3f41 Linus Torvalds 2005-04-16 491
156d9ed1260ee5 Al Viro 2017-07-09 492 memset(msginfo, 0, sizeof(*msginfo));
156d9ed1260ee5 Al Viro 2017-07-09 493 msginfo->msgmni = ns->msg_ctlmni;
156d9ed1260ee5 Al Viro 2017-07-09 494 msginfo->msgmax = ns->msg_ctlmax;
156d9ed1260ee5 Al Viro 2017-07-09 495 msginfo->msgmnb = ns->msg_ctlmnb;
156d9ed1260ee5 Al Viro 2017-07-09 496 msginfo->msgssz = MSGSSZ;
156d9ed1260ee5 Al Viro 2017-07-09 @497 msginfo->msgseg = MSGSEG;
d9a605e40b1376 Davidlohr Bueso 2013-09-11 498 down_read(&msg_ids(ns).rwsem);
72d1e611082eda Jiebin Sun 2022-09-14 499 if (cmd == MSG_INFO)
156d9ed1260ee5 Al Viro 2017-07-09 500 msginfo->msgpool = msg_ids(ns).in_use;
72d1e611082eda Jiebin Sun 2022-09-14 501 max_idx = ipc_get_maxidx(&msg_ids(ns));
72d1e611082eda Jiebin Sun 2022-09-14 502 up_read(&msg_ids(ns).rwsem);
72d1e611082eda Jiebin Sun 2022-09-14 503 if (cmd == MSG_INFO) {
72d1e611082eda Jiebin Sun 2022-09-14 504 msginfo->msgmap = min_t(int,
72d1e611082eda Jiebin Sun 2022-09-14 505 percpu_counter_sum(&ns->percpu_msg_hdrs),
72d1e611082eda Jiebin Sun 2022-09-14 506 INT_MAX);
72d1e611082eda Jiebin Sun 2022-09-14 507 msginfo->msgtql = min_t(int,
72d1e611082eda Jiebin Sun 2022-09-14 508 percpu_counter_sum(&ns->percpu_msg_bytes),
72d1e611082eda Jiebin Sun 2022-09-14 509 INT_MAX);
^1da177e4c3f41 Linus Torvalds 2005-04-16 510 } else {
156d9ed1260ee5 Al Viro 2017-07-09 511 msginfo->msgmap = MSGMAP;
156d9ed1260ee5 Al Viro 2017-07-09 512 msginfo->msgpool = MSGPOOL;
156d9ed1260ee5 Al Viro 2017-07-09 513 msginfo->msgtql = MSGTQL;
^1da177e4c3f41 Linus Torvalds 2005-04-16 514 }
27c331a1746142 Manfred Spraul 2018-08-21 515 return (max_idx < 0) ? 0 : max_idx;
^1da177e4c3f41 Linus Torvalds 2005-04-16 516 }2cafed30f150f7 Davidlohr Bueso 2013-07-08 517
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
kernel test robot
build botRe: [PATCH 2/4] mm: move per-vma lock into vm_area_struct
In reply to Suren Baghdasaryankernel test robot noticed the following build errors:
Hi Suren,
kernel test robot noticed the following build errors:
[auto build test ERROR on 931086f2a88086319afb57cd3925607e8cda0a9f]
url: https://github.com/intel-lab-lkp/linux/commits/Suren-Baghdasaryan/mm-introduce-vma_start_read_locked-_nested-helpers/20241112-050531 base: 931086f2a88086319afb57cd3925607e8cda0a9f patch link: https://lore.kernel.org/r/20241111205506.3404479-3-surenb%40google.com patch subject: [PATCH 2/4] mm: move per-vma lock into vm_area_struct config: um-x86_64_defconfig (https://download.01.org/0day-ci/archive/20241112/[email protected]/config) compiler: clang version 15.0.7 (https://github.com/llvm/llvm-project 8dfdcc7b7bf66834a761bd8de445840ef68e4d1a) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241112/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
In file included from ipc/util.c:47:
>> include/linux/mm.h:877:2: error: call to undeclared function 'vma_lock_init'; ISO C99 and later do not support implicit function declarations [-Werror,-Wimplicit-function-declaration]
vma_lock_init(&vma->vm_lock);
^
include/linux/mm.h:877:2: note: did you mean 'osq_lock_init'?
include/linux/osq_lock.h:23:20: note: 'osq_lock_init' declared here
static inline void osq_lock_init(struct optimistic_spin_queue *lock)
^
In file included from ipc/util.c:47:
include/linux/mm.h:877:22: error: no member named 'vm_lock' in 'struct vm_area_struct'
vma_lock_init(&vma->vm_lock);
~~~ ^
include/linux/mm.h:878:7: error: no member named 'vm_lock_seq' in 'struct vm_area_struct'
vma->vm_lock_seq = UINT_MAX;
~~~ ^
In file included from ipc/util.c:47:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:98:11: warning: array index 3 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set->sig[3] | set->sig[2] |
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/util.c:47:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:98:25: warning: array index 2 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set->sig[3] | set->sig[2] |
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/util.c:47:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:99:4: warning: array index 1 is past the end of the array (which contains 1 element) [-Warray-bounds]
set->sig[1] | set->sig[0]) == 0;
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/util.c:47:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:101:11: warning: array index 1 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set->sig[1] | set->sig[0]) == 0;
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/util.c:47:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:114:11: warning: array index 3 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set1->sig[3] == set2->sig[3]) &&
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/util.c:47:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:114:27: warning: array index 3 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set1->sig[3] == set2->sig[3]) &&
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/util.c:47:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:115:5: warning: array index 2 is past the end of the array (which contains 1 element) [-Warray-bounds]
(set1->sig[2] == set2->sig[2]) &&
--
In file included from ipc/msgutil.c:9:
In file included from include/linux/security.h:33:
>> include/linux/mm.h:877:2: error: call to undeclared function 'vma_lock_init'; ISO C99 and later do not support implicit function declarations [-Werror,-Wimplicit-function-declaration]
vma_lock_init(&vma->vm_lock);
^
include/linux/mm.h:877:2: note: did you mean 'osq_lock_init'?
include/linux/osq_lock.h:23:20: note: 'osq_lock_init' declared here
static inline void osq_lock_init(struct optimistic_spin_queue *lock)
^
In file included from ipc/msgutil.c:9:
In file included from include/linux/security.h:33:
include/linux/mm.h:877:22: error: no member named 'vm_lock' in 'struct vm_area_struct'
vma_lock_init(&vma->vm_lock);
~~~ ^
include/linux/mm.h:878:7: error: no member named 'vm_lock_seq' in 'struct vm_area_struct'
vma->vm_lock_seq = UINT_MAX;
~~~ ^
In file included from ipc/msgutil.c:9:
In file included from include/linux/security.h:35:
In file included from include/linux/bpf.h:31:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/um/include/asm/hardirq.h:5:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:548:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __raw_readb(PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:561:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
^
In file included from ipc/msgutil.c:9:
In file included from include/linux/security.h:35:
In file included from include/linux/bpf.h:31:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/um/include/asm/hardirq.h:5:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:574:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
^
In file included from ipc/msgutil.c:9:
In file included from include/linux/security.h:35:
In file included from include/linux/bpf.h:31:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from arch/um/include/asm/hardirq.h:5:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/um/include/asm/io.h:24:
include/asm-generic/io.h:585:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writeb(value, PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:595:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:605:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:693:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
readsb(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:701:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
readsw(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:709:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
readsl(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:718:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
writesb(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:727:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
writesw(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:736:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
writesl(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
12 warnings and 3 errors generated.
--
In file included from ipc/msg.c:30:
>> include/linux/mm.h:877:2: error: call to undeclared function 'vma_lock_init'; ISO C99 and later do not support implicit function declarations [-Werror,-Wimplicit-function-declaration]
vma_lock_init(&vma->vm_lock);
^
include/linux/mm.h:877:2: note: did you mean 'osq_lock_init'?
include/linux/osq_lock.h:23:20: note: 'osq_lock_init' declared here
static inline void osq_lock_init(struct optimistic_spin_queue *lock)
^
In file included from ipc/msg.c:30:
include/linux/mm.h:877:22: error: no member named 'vm_lock' in 'struct vm_area_struct'
vma_lock_init(&vma->vm_lock);
~~~ ^
include/linux/mm.h:878:7: error: no member named 'vm_lock_seq' in 'struct vm_area_struct'
vma->vm_lock_seq = UINT_MAX;
~~~ ^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:98:11: warning: array index 3 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set->sig[3] | set->sig[2] |
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:98:25: warning: array index 2 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set->sig[3] | set->sig[2] |
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:99:4: warning: array index 1 is past the end of the array (which contains 1 element) [-Warray-bounds]
set->sig[1] | set->sig[0]) == 0;
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:101:11: warning: array index 1 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set->sig[1] | set->sig[0]) == 0;
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:114:11: warning: array index 3 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set1->sig[3] == set2->sig[3]) &&
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:114:27: warning: array index 3 is past the end of the array (which contains 1 element) [-Warray-bounds]
return (set1->sig[3] == set2->sig[3]) &&
^ ~
arch/x86/include/asm/signal.h:24:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
In file included from ipc/msg.c:30:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:115:5: warning: array index 2 is past the end of the array (which contains 1 element) [-Warray-bounds]
(set1->sig[2] == set2->sig[2]) &&..
vim +/vma_lock_init +877 include/linux/mm.h
868
869 static inline void vma_init(struct vm_area_struct *vma, struct mm_struct *mm)
870 {
871 memset(vma, 0, sizeof(*vma));
872 vma->vm_mm = mm;
873 vma->vm_ops = &vma_dummy_vm_ops;
874 INIT_LIST_HEAD(&vma->anon_vma_chain);
875 vma_mark_detached(vma, false);
876 vma_numab_state_init(vma);
> 877 vma_lock_init(&vma->vm_lock);
878 vma->vm_lock_seq = UINT_MAX;
879 }
880
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
kernel test robot
build botRe: [PATCH 2/4] mm: move per-vma lock into vm_area_struct
In reply to Suren Baghdasaryankernel test robot noticed the following build warnings:
Hi Suren,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 931086f2a88086319afb57cd3925607e8cda0a9f]
url: https://github.com/intel-lab-lkp/linux/commits/Suren-Baghdasaryan/mm-introduce-vma_start_read_locked-_nested-helpers/20241112-050531 base: 931086f2a88086319afb57cd3925607e8cda0a9f patch link: https://lore.kernel.org/r/20241111205506.3404479-3-surenb%40google.com patch subject: [PATCH 2/4] mm: move per-vma lock into vm_area_struct config: hexagon-randconfig-002-20241112 (https://download.01.org/0day-ci/archive/20241112/[email protected]/config) compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 592c0fe55f6d9a811028b5f3507be91458ab2713) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241112/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
| ^
include/uapi/asm-generic/signal.h:62:2: note: array 'sig' declared here
62 | unsigned long sig[_NSIG_WORDS];
| ^
In file included from kernel/dma/direct.c:7:
In file included from include/linux/memblock.h:12:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:187:1: warning: array index 3 is past the end of the array (that has type 'unsigned long[2]') [-Warray-bounds]
187 | _SIG_SET_OP(signotset, _sig_not)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/signal.h:174:10: note: expanded from macro '_SIG_SET_OP'
174 | case 4: set->sig[3] = op(set->sig[3]); \
| ^ ~
include/uapi/asm-generic/signal.h:62:2: note: array 'sig' declared here
62 | unsigned long sig[_NSIG_WORDS];
| ^
In file included from kernel/dma/direct.c:7:
In file included from include/linux/memblock.h:12:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:187:1: warning: array index 2 is past the end of the array (that has type 'unsigned long[2]') [-Warray-bounds]
187 | _SIG_SET_OP(signotset, _sig_not)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/signal.h:175:20: note: expanded from macro '_SIG_SET_OP'
175 | set->sig[2] = op(set->sig[2]); \
| ^ ~
include/linux/signal.h:186:24: note: expanded from macro '_sig_not'
186 | #define _sig_not(x) (~(x))
| ^
include/uapi/asm-generic/signal.h:62:2: note: array 'sig' declared here
62 | unsigned long sig[_NSIG_WORDS];
| ^
In file included from kernel/dma/direct.c:7:
In file included from include/linux/memblock.h:12:
In file included from include/linux/mm.h:1143:
In file included from include/linux/huge_mm.h:7:
In file included from include/linux/fs.h:33:
In file included from include/linux/percpu-rwsem.h:7:
In file included from include/linux/rcuwait.h:6:
In file included from include/linux/sched/signal.h:6:
include/linux/signal.h:187:1: warning: array index 2 is past the end of the array (that has type 'unsigned long[2]') [-Warray-bounds]
187 | _SIG_SET_OP(signotset, _sig_not)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/signal.h:175:3: note: expanded from macro '_SIG_SET_OP'
175 | set->sig[2] = op(set->sig[2]); \
| ^ ~
include/uapi/asm-generic/signal.h:62:2: note: array 'sig' declared here
62 | unsigned long sig[_NSIG_WORDS];
| ^
In file included from kernel/dma/direct.c:7:
In file included from include/linux/memblock.h:12:
In file included from include/linux/mm.h:2234:
include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
In file included from kernel/dma/direct.c:7:
In file included from include/linux/memblock.h:13:
In file included from arch/hexagon/include/asm/dma.h:9:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:548:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
548 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:561:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
561 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
In file included from kernel/dma/direct.c:7:
In file included from include/linux/memblock.h:13:
In file included from arch/hexagon/include/asm/dma.h:9:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:574:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
574 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
In file included from kernel/dma/direct.c:7:
In file included from include/linux/memblock.h:13:
In file included from arch/hexagon/include/asm/dma.h:9:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:585:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
585 | __raw_writeb(value, PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:595:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
595 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:605:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
605 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
>> kernel/dma/direct.c:147:20: warning: shift count >= width of type [-Wshift-count-overflow]
146 | if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
147 | phys_limit < DMA_BIT_MASK(64) &&
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
148 | !(gfp & (GFP_DMA32 | GFP_DMA))) {
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:77:54: note: expanded from macro 'DMA_BIT_MASK'
77 | #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
| ^
include/linux/compiler.h:55:47: note: expanded from macro 'if'
55 | #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:57:52: note: expanded from macro '__trace_if_var'
57 | #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
| ^~~~
>> kernel/dma/direct.c:147:20: warning: shift count >= width of type [-Wshift-count-overflow]
146 | if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
147 | phys_limit < DMA_BIT_MASK(64) &&
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
148 | !(gfp & (GFP_DMA32 | GFP_DMA))) {
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:77:54: note: expanded from macro 'DMA_BIT_MASK'
77 | #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
| ^
include/linux/compiler.h:55:47: note: expanded from macro 'if'
55 | #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:57:61: note: expanded from macro '__trace_if_var'
57 | #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
| ^~~~
>> kernel/dma/direct.c:147:20: warning: shift count >= width of type [-Wshift-count-overflow]
146 | if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
147 | phys_limit < DMA_BIT_MASK(64) &&
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
148 | !(gfp & (GFP_DMA32 | GFP_DMA))) {
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:77:54: note: expanded from macro 'DMA_BIT_MASK'
77 | #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
| ^
include/linux/compiler.h:55:47: note: expanded from macro 'if'
55 | #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:57:86: note: expanded from macro '__trace_if_var'
57 | #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
| ~~~~~~~~~~~~~~~~~^~~~~
include/linux/compiler.h:68:3: note: expanded from macro '__trace_if_value'
68 | (cond) ? \
| ^~~~ 38 warnings and 3 errors generated.
--
In file included from drivers/iio/adc/fsl-imx25-gcq.c:12:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:548:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
548 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:561:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
561 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
In file included from drivers/iio/adc/fsl-imx25-gcq.c:12:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:574:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
574 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
In file included from drivers/iio/adc/fsl-imx25-gcq.c:12:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:14:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:585:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
585 | __raw_writeb(value, PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:595:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
595 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:605:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
605 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
In file included from drivers/iio/adc/fsl-imx25-gcq.c:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:21:
include/linux/mm.h:877:2: error: call to undeclared function 'vma_lock_init'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
877 | vma_lock_init(&vma->vm_lock);
| ^
include/linux/mm.h:877:2: note: did you mean 'osq_lock_init'?
include/linux/osq_lock.h:23:20: note: 'osq_lock_init' declared here
23 | static inline void osq_lock_init(struct optimistic_spin_queue *lock)
| ^
In file included from drivers/iio/adc/fsl-imx25-gcq.c:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:21:
include/linux/mm.h:877:22: error: no member named 'vm_lock' in 'struct vm_area_struct'
877 | vma_lock_init(&vma->vm_lock);
| ~~~ ^
include/linux/mm.h:878:7: error: no member named 'vm_lock_seq' in 'struct vm_area_struct'
878 | vma->vm_lock_seq = UINT_MAX;
| ~~~ ^
In file included from drivers/iio/adc/fsl-imx25-gcq.c:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:21:
In file included from include/linux/mm.h:2234:
include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
>> drivers/iio/adc/fsl-imx25-gcq.c:116:8: warning: shift count is negative [-Wshift-count-negative]
116 | MX25_ADCQ_ITEM(0, chan->channel));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/mfd/imx25-tsadc.h:54:3: note: expanded from macro 'MX25_ADCQ_ITEM'
54 | _MX25_ADCQ_ITEM((item) - 8, (x)) : _MX25_ADCQ_ITEM((item), (x)))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/mfd/imx25-tsadc.h:52:39: note: expanded from macro '_MX25_ADCQ_ITEM'
52 | #define _MX25_ADCQ_ITEM(item, x) ((x) << ((item) * 4))
| ^ ~~~~~~~~~~~~
8 warnings and 3 errors generated.
vim +147 kernel/dma/direct.c
aea7e2a86a94b25 kernel/dma/direct.c Christoph Hellwig 2021-10-21 117
26749b3201ab05e kernel/dma/direct.c Christoph Hellwig 2020-06-15 118 static struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
92826e967535db2 kernel/dma/direct.c Christoph Hellwig 2022-04-23 119 gfp_t gfp, bool allow_highmem)
a8463d4b0e47d1f lib/dma-noop.c Christian Borntraeger 2016-02-02 120 {
90ae409f9eb3bca kernel/dma/direct.c Christoph Hellwig 2019-08-20 121 int node = dev_to_node(dev);
080321d3b3139b3 lib/dma-direct.c Christoph Hellwig 2017-12-22 122 struct page *page = NULL;
a7ba70f1787f977 kernel/dma/direct.c Nicolas Saenz Julienne 2019-11-21 123 u64 phys_limit;
a8463d4b0e47d1f lib/dma-noop.c Christian Borntraeger 2016-02-02 124
633d5fce78a61e8 kernel/dma/direct.c David Rientjes 2020-06-11 125 WARN_ON_ONCE(!PAGE_ALIGNED(size));
633d5fce78a61e8 kernel/dma/direct.c David Rientjes 2020-06-11 126
aea7e2a86a94b25 kernel/dma/direct.c Christoph Hellwig 2021-10-21 127 if (is_swiotlb_for_alloc(dev))
aea7e2a86a94b25 kernel/dma/direct.c Christoph Hellwig 2021-10-21 128 return dma_direct_alloc_swiotlb(dev, size);
aea7e2a86a94b25 kernel/dma/direct.c Christoph Hellwig 2021-10-21 129
25a4ce564921db0 kernel/dma/direct.c Petr Tesarik 2023-02-20 130 gfp |= dma_direct_optimal_gfp_mask(dev, &phys_limit);
633d5fce78a61e8 kernel/dma/direct.c David Rientjes 2020-06-11 131 page = dma_alloc_contiguous(dev, size, gfp);
92826e967535db2 kernel/dma/direct.c Christoph Hellwig 2022-04-23 132 if (page) {
92826e967535db2 kernel/dma/direct.c Christoph Hellwig 2022-04-23 133 if (!dma_coherent_ok(dev, page_to_phys(page), size) ||
92826e967535db2 kernel/dma/direct.c Christoph Hellwig 2022-04-23 134 (!allow_highmem && PageHighMem(page))) {
633d5fce78a61e8 kernel/dma/direct.c David Rientjes 2020-06-11 135 dma_free_contiguous(dev, page, size);
90ae409f9eb3bca kernel/dma/direct.c Christoph Hellwig 2019-08-20 136 page = NULL;
90ae409f9eb3bca kernel/dma/direct.c Christoph Hellwig 2019-08-20 137 }
92826e967535db2 kernel/dma/direct.c Christoph Hellwig 2022-04-23 138 }
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 139 again:
90ae409f9eb3bca kernel/dma/direct.c Christoph Hellwig 2019-08-20 140 if (!page)
633d5fce78a61e8 kernel/dma/direct.c David Rientjes 2020-06-11 141 page = alloc_pages_node(node, gfp, get_order(size));
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 142 if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) {
f689a3ab7b8ece9 kernel/dma/direct.c Chen Yu 2024-08-31 143 __free_pages(page, get_order(size));
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 144 page = NULL;
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 145
de7eab301de7886 lib/dma-direct.c Takashi Iwai 2018-04-16 146 if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
a7ba70f1787f977 kernel/dma/direct.c Nicolas Saenz Julienne 2019-11-21 @147 phys_limit < DMA_BIT_MASK(64) &&
de7eab301de7886 lib/dma-direct.c Takashi Iwai 2018-04-16 148 !(gfp & (GFP_DMA32 | GFP_DMA))) {
de7eab301de7886 lib/dma-direct.c Takashi Iwai 2018-04-16 149 gfp |= GFP_DMA32;
de7eab301de7886 lib/dma-direct.c Takashi Iwai 2018-04-16 150 goto again;
de7eab301de7886 lib/dma-direct.c Takashi Iwai 2018-04-16 151 }
de7eab301de7886 lib/dma-direct.c Takashi Iwai 2018-04-16 152
fbce251baa6e357 kernel/dma/direct.c Christoph Hellwig 2019-02-13 153 if (IS_ENABLED(CONFIG_ZONE_DMA) && !(gfp & GFP_DMA)) {
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 154 gfp = (gfp & ~GFP_DMA32) | GFP_DMA;
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 155 goto again;
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 156 }
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 157 }
95f183916d4b0bc lib/dma-direct.c Christoph Hellwig 2018-01-09 158
b18814e767a4455 kernel/dma/direct.c Christoph Hellwig 2018-11-04 159 return page;
b18814e767a4455 kernel/dma/direct.c Christoph Hellwig 2018-11-04 160 }
b18814e767a4455 kernel/dma/direct.c Christoph Hellwig 2018-11-04 161 Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Re: [PATCH 2/4] mm: move per-vma lock into vm_area_struct
In reply to Suren Baghdasaryankernel/fork.c void __vm_area_free(struct vm_area_struct *vma) · line 480
Quoted 7 lines · Suren Baghdasaryan
kernel/fork.c +0
-1@@ -511,7 +476,6 @@ void __vm_area_free(struct vm_area_struct *vma) {vma_numab_state_free (vma);free_anon_vma_name (vma); -vma_lock_free (vma);kmem_cache_free (vm_area_cachep, vma); }
Have you investigated if this allows to perform vma_numab_state_free() and free_anon_vma_name() immediately, and only kfree_rcu() the vma itself, instead of performing all this in a call_rcu() callback?
Of course if we succeed converting vma's to SLAB_TYPESAFE_RCU this immediate freeing of numab state and anon_vma_name would be implied, but maybe it's an useful intermediate step on its own.
Suren Baghdasaryan
maintainerRe: [PATCH 2/4] mm: move per-vma lock into vm_area_struct
Quoted 13 lines · Vlastimil Babka
kernel/fork.c void __vm_area_free(struct vm_area_struct *vma) · line 480
Quoted 7 lines · Suren Baghdasaryan
kernel/fork.c +0
-1@@ -511,7 +476,6 @@ void __vm_area_free(struct vm_area_struct *vma) {vma_numab_state_free (vma);free_anon_vma_name (vma); -vma_lock_free (vma);kmem_cache_free (vm_area_cachep, vma); }Have you investigated if this allows to perform
vma_numab_state_free()andfree_anon_vma_name()immediately, and onlykfree_rcu()the vma itself, instead of performing all this in acall_rcu()callback?
Yes, it should be fine to free them immediately. lock_vma_under_rcu() does not use neither vma->numab_state, nor vma->anon_name.
Quoted 4 lines
Of course if we succeed converting vma's to
SLAB_TYPESAFE_RCUthis immediate freeing of numab state andanon_vma_namewould be implied, but maybe it's an useful intermediate step on its own.
I'm thinking maybe I should post SLAB_TYPESAFE_RCU conversion before anything else. It's simple and quite uncontroversial. I will probably do that today.
Suren Baghdasaryan
maintainerRe: [PATCH 2/4] mm: move per-vma lock into vm_area_struct
Quoted 20 lines · Suren Baghdasaryan
Quoted 13 lines · Vlastimil Babka
kernel/fork.c void __vm_area_free(struct vm_area_struct *vma) · line 480
Quoted 7 lines · Suren Baghdasaryan
kernel/fork.c +0
-1@@ -511,7 +476,6 @@ void __vm_area_free(struct vm_area_struct *vma) {vma_numab_state_free (vma);free_anon_vma_name (vma); -vma_lock_free (vma);kmem_cache_free (vm_area_cachep, vma); }Have you investigated if this allows to perform
vma_numab_state_free()andfree_anon_vma_name()immediately, and onlykfree_rcu()the vma itself, instead of performing all this in acall_rcu()callback?Yes, it should be fine to free them immediately.
lock_vma_under_rcu()does not use neithervma->numab_state, norvma->anon_name.Quoted 1 line
Quoted 7 lines
Quoted 3 lines
Of course if we succeed converting vma's to
SLAB_TYPESAFE_RCUthis immediate freeing of numab state andanon_vma_namewould be implied, but maybe it's an useful intermediate step on its own.I'm thinking maybe I should post
SLAB_TYPESAFE_RCUconversion before anything else. It's simple and quite uncontroversial. I will probably do that today.
Uh, I forgot that I can't post SLAB_TYPESAFE_RCU until I eliminate this vma_lock_free() call inside __vm_area_free(). So, I have to bundle moving vm_lock into vm_area_struct with SLAB_TYPESAFE_RCU.
Suren Baghdasaryan
maintainerPATCH 3/4 mm: replace rw_semaphore with atomic_t in vma_lock
In reply to Suren Baghdasaryanrw_semaphore is a sizable structure of 40 bytes and consumes considerable space for each vm_area_struct. However vma_lock has two important specifics which can be used to replace rw_semaphore with a simpler structure:
1. Readers never wait. They try to take the vma_lock and fall back to mmap_lock if that fails.
2. Only one writer at a time will ever try to write-lock a vma_lock because writers first take mmap_lock in write mode.
Because of these requirements, full rw_semaphore functionality is not needed and we can replace rw_semaphore with an atomic variable. When a reader takes read lock, it increments the atomic, unless the top two bits are set indicating a writer is present.
When writer takes write lock, it sets VMA_LOCK_WR_LOCKED bit if there are no readers or VMA_LOCK_WR_WAIT bit if readers are holding the lock and puts itself onto newly introduced mm.vma_writer_wait. Since all writers take mmap_lock in write mode first, there can be only one writer at a time. The last reader to release the lock will signal the writer to wake up.atomic_t might overflow if there are many competing readers, therefore vma_start_read() implements an overflow check and if that occurs it exits with a failure to lock. vma_start_read_locked{_nested} may cause an overflow but it is later handled by __vma_end_read().
--- include/linux/mm.h | 142 ++++++++++++++++++++++++++++++++++---- include/linux/mm_types.h | 18 ++++- include/linux/mmap_lock.h | 3 + kernel/fork.c | 2 +- mm/init-mm.c | 2 + 5 files changed, 151 insertions(+), 16 deletions(-)
include/linux/mm.h +128 -14
@@ -686,7 +686,41 @@ static inline void vma_numab_state_free(struct vm_area_struct *vma) {}#ifdef CONFIG_PER_VMA_LOCK static inline void vma_lock_init (struct vma_lock *vm_lock) { -init_rwsem (&vm_lock->lock); +#ifdef CONFIG_DEBUG_LOCK_ALLOC +static struct lock_class_key lockdep_key; + +lockdep_init_map (&vm_lock->dep_map,"vm_lock" , &lockdep_key,0 ); +#endif +atomic_set (&vm_lock->count,VMA_LOCK_UNLOCKED ); +} + +static inline unsigned int vma_lock_reader_count (unsigned int counter) +{ +return counter &VMA_LOCK_RD_COUNT_MASK ; +} + +static inline void __vma_end_read (struct mm_struct *mm,struct vm_area_struct *vma) +{ +unsigned int count, prev, new; + + count = (unsigned int )atomic_read (&vma->vm_lock.count); +for (;;) { +if (unlikely (vma_lock_reader_count (count) ==0 )) { +/* +* Overflow was possible in vma_start_read_locked(). +* When detected, wrap around preserving writer bits. +*/ + new = count | ~(VMA_LOCK_WR_LOCKED |VMA_LOCK_WR_WAIT ); + }else + new = count -1 ; + prev =atomic_cmpxchg (&vma->vm_lock.count, count, new); +if (prev == count) +break ; + count = prev; + } +rwsem_release (&vma->vm_lock.dep_map, _RET_IP_); +if (vma_lock_reader_count (new) ==0 && (new &VMA_LOCK_WR_WAIT )) +wake_up (&mm->vma_writer_wait); }/*
@@ -696,6 +730,9 @@ static inline void vma_lock_init(struct vma_lock *vm_lock)*/ static inline bool vma_start_read (struct vm_area_struct *vma) { +struct mm_struct *mm = vma->vm_mm; +unsigned int count, prev, new; +/* * Check before locking. A race might cause false locked result. * We can use READ_ONCE() for the mm_lock_seq here, and don't need
@@ -703,11 +740,35 @@ static inline bool vma_start_read(struct vm_area_struct *vma)* we don't rely on for anything - the mm_lock_seq read against which we * need ordering is below. */ -if (READ_ONCE (vma->vm_lock_seq) ==READ_ONCE (vma->vm_mm->mm_lock_seq.sequence)) +if (READ_ONCE (vma->vm_lock_seq) ==READ_ONCE (mm->mm_lock_seq.sequence))return false; -if (unlikely (down_read_trylock (&vma->vm_lock.lock) ==0 )) -return false; +rwsem_acquire_read (&vma->vm_lock.dep_map,0 ,0 , _RET_IP_); + count = (unsigned int )atomic_read (&vma->vm_lock.count); +for (;;) { +/* Is VMA is write-locked or writer is waiting? */ +if (count & (VMA_LOCK_WR_LOCKED |VMA_LOCK_WR_WAIT )) { +rwsem_release (&vma->vm_lock.dep_map, _RET_IP_); +return false; + } + + new = count +1 ; +/* If atomic_t overflows, fail to lock. */ +if (new & (VMA_LOCK_WR_LOCKED |VMA_LOCK_WR_WAIT )) { +rwsem_release (&vma->vm_lock.dep_map, _RET_IP_); +return false; + } + +/* +* Atomic RMW will provide implicit mb on success to pair with smp_wmb in +* vma_start_write, on failure we retry. +*/ + prev =atomic_cmpxchg (&vma->vm_lock.count, count, new); +if (prev == count) +break ; + count = prev; + } +lock_acquired (&vma->vm_lock.dep_map, _RET_IP_);/* * Overflow might produce false locked result.
@@ -720,8 +781,8 @@ static inline bool vma_start_read(struct vm_area_struct *vma)* after it has been unlocked. * This pairs with RELEASE semantics in vma_end_write_all(). */ -if (unlikely (vma->vm_lock_seq ==raw_read_seqcount (&vma->vm_mm->mm_lock_seq))) { -up_read (&vma->vm_lock.lock); +if (unlikely (vma->vm_lock_seq ==raw_read_seqcount (&mm->mm_lock_seq))) { +__vma_end_read (mm, vma);return false; }return true;
@@ -733,8 +794,30 @@ static inline bool vma_start_read(struct vm_area_struct *vma)*/ static inline void vma_start_read_locked_nested (struct vm_area_struct *vma,int subclass) { -mmap_assert_locked (vma->vm_mm); -down_read_nested (&vma->vm_lock.lock, subclass); +struct mm_struct *mm = vma->vm_mm; +unsigned int count, prev, new; + +mmap_assert_locked (mm); + +rwsem_acquire_read (&vma->vm_lock.dep_map, subclass,0 , _RET_IP_); + count = (unsigned int )atomic_read (&vma->vm_lock.count); +for (;;) { +/* We are holding mmap_lock, no active or waiting writers are possible. */ +VM_BUG_ON_VMA (count & (VMA_LOCK_WR_LOCKED |VMA_LOCK_WR_WAIT ), vma); + new = count +1 ; +/* Unlikely but if atomic_t overflows, wrap around to. */ +if (WARN_ON (new & (VMA_LOCK_WR_LOCKED |VMA_LOCK_WR_WAIT ))) + new =0 ; +/* +* Atomic RMW will provide implicit mb on success to pair with smp_wmb in +* vma_start_write, on failure we retry. +*/ + prev =atomic_cmpxchg (&vma->vm_lock.count, count, new); +if (prev == count) +break ; + count = prev; + } +lock_acquired (&vma->vm_lock.dep_map, _RET_IP_); }/*
@@ -743,14 +826,15 @@ static inline void vma_start_read_locked_nested(struct vm_area_struct *vma, int*/ static inline void vma_start_read_locked (struct vm_area_struct *vma) { -mmap_assert_locked (vma->vm_mm); -down_read (&vma->vm_lock.lock); +vma_start_read_locked_nested (vma,0 ); }static inline void vma_end_read (struct vm_area_struct *vma) { +struct mm_struct *mm = vma->vm_mm; +rcu_read_lock ();/* keeps vma alive till the end of up_read */ -up_read (&vma->vm_lock.lock); +__vma_end_read (mm, vma);rcu_read_unlock (); }
@@ -774,12 +858,34 @@ static bool __is_vma_write_locked(struct vm_area_struct *vma, unsigned int *mm_l*/ static inline void vma_start_write (struct vm_area_struct *vma) { +unsigned int count, prev, new;unsigned int mm_lock_seq; +might_sleep ();if (__is_vma_write_locked (vma, &mm_lock_seq))return ; -down_write (&vma->vm_lock.lock); +rwsem_acquire (&vma->vm_lock.dep_map,0 ,0 , _RET_IP_); + count = (unsigned int )atomic_read (&vma->vm_lock.count); +for (;;) { +if (vma_lock_reader_count (count) >0 ) + new = count |VMA_LOCK_WR_WAIT ; +else + new = count |VMA_LOCK_WR_LOCKED ; + prev =atomic_cmpxchg (&vma->vm_lock.count, count, new); +if (prev == count) +break ; + count = prev; + } +if (new &VMA_LOCK_WR_WAIT ) { +lock_contended (&vma->vm_lock.dep_map, _RET_IP_); +wait_event (vma->vm_mm->vma_writer_wait, +atomic_cmpxchg (&vma->vm_lock.count,VMA_LOCK_WR_WAIT , +VMA_LOCK_WR_LOCKED ) ==VMA_LOCK_WR_WAIT ); + + } +lock_acquired (&vma->vm_lock.dep_map, _RET_IP_); +/* * We should use WRITE_ONCE() here because we can have concurrent reads * from the early lockless pessimistic check in vma_start_read().
@@ -787,7 +893,10 @@ static inline void vma_start_write(struct vm_area_struct *vma)* we should use WRITE_ONCE() for cleanliness and to keep KCSAN happy. */ WRITE_ONCE (vma->vm_lock_seq, mm_lock_seq); -up_write (&vma->vm_lock.lock); +/* Write barrier to ensure vm_lock_seq change is visible before count */ +smp_wmb (); +rwsem_release (&vma->vm_lock.dep_map, _RET_IP_); +atomic_set (&vma->vm_lock.count,VMA_LOCK_UNLOCKED ); }static inline void vma_assert_write_locked (struct vm_area_struct *vma)
@@ -797,9 +906,14 @@ static inline void vma_assert_write_locked(struct vm_area_struct *vma)VM_BUG_ON_VMA (!__is_vma_write_locked (vma, &mm_lock_seq), vma); } +static inline bool is_vma_read_locked (struct vm_area_struct *vma) +{ +return vma_lock_reader_count ((unsigned int )atomic_read (&vma->vm_lock.count)) >0 ; +} +static inline void vma_assert_locked (struct vm_area_struct *vma) { -if (!rwsem_is_locked (&vma->vm_lock.lock)) +if (!is_vma_read_locked (vma))vma_assert_write_locked (vma); }
include/linux/mm_types.h +17 -1
@@ -615,8 +615,23 @@ static inline struct anon_vma_name *anon_vma_name_alloc(const char *name) }#endif +#define VMA_LOCK_UNLOCKED 0 +#define VMA_LOCK_WR_LOCKED (1 << 31) +#define VMA_LOCK_WR_WAIT (1 << 30) + +#define VMA_LOCK_RD_COUNT_MASK (VMA_LOCK_WR_WAIT - 1) +struct vma_lock { -struct rw_semaphore lock; +/* +* count & VMA_LOCK_RD_COUNT_MASK > 0 ==> read-locked with 'count' number of readers +* count & VMA_LOCK_WR_LOCKED != 0 ==> write-locked +* count & VMA_LOCK_WR_WAIT != 0 ==> writer is waiting +* count = 0 ==> unlocked +*/ +atomic_t count; +#ifdef CONFIG_DEBUG_LOCK_ALLOC +struct lockdep_map dep_map; +#endif };struct vma_numab_state {
@@ -883,6 +898,7 @@ struct mm_struct {* by mmlist_lock */ #ifdef CONFIG_PER_VMA_LOCK +struct wait_queue_head vma_writer_wait;/* * This field has lock-like semantics, meaning it is sometimes * accessed with ACQUIRE/RELEASE semantics.
include/linux/mmap_lock.h +3 -0
@@ -121,6 +121,9 @@ static inline void mmap_init_lock(struct mm_struct *mm) {init_rwsem (&mm->mmap_lock);mm_lock_seqcount_init (mm); +#ifdef CONFIG_PER_VMA_LOCK +init_waitqueue_head (&mm->vma_writer_wait); +#endif }static inline void mmap_write_lock (struct mm_struct *mm)
kernel/fork.c +1 -1
@@ -486,7 +486,7 @@ static void vm_area_free_rcu_cb(struct rcu_head *head) vm_rcu);/* The vma should not be locked while being destroyed. */ -VM_BUG_ON_VMA (rwsem_is_locked (&vma->vm_lock.lock), vma); +VM_BUG_ON_VMA (is_vma_read_locked (vma), vma); __vm_area_free(vma); }#endif
mm/init-mm.c +2 -0
@@ -40,6 +40,8 @@ struct mm_struct init_mm = { .arg_lock = __SPIN_LOCK_UNLOCKED(init_mm.arg_lock), .mmlist =LIST_HEAD_INIT (init_mm.mmlist), #ifdef CONFIG_PER_VMA_LOCK + .vma_writer_wait = +__WAIT_QUEUE_HEAD_INITIALIZER (init_mm.vma_writer_wait), .mm_lock_seq = SEQCNT_ZERO(init_mm.mm_lock_seq), #endif .user_ns = &init_user_ns,
Signature · 1 line
2.47.0.277.g8800431eea-goog
Andrew Morton
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 1 line · On Mon, 11 Nov 2024 12:55:05 -0800 Suren Baghdasaryan <[email protected]> wrote:
include/linux/mm.h | 142 ++++++++++++++++++++++++++++++++++----
There's soooo much inlining happening here. Perhaps we should have a "default to uninlined, unless a benefit is demonstrated" guideline?
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 7 lines · Andrew Morton
Quoted 1 line · On Mon, 11 Nov 2024 12:55:05 -0800 Suren Baghdasaryan <[email protected]> wrote:
include/linux/mm.h | 142 ++++++++++++++++++++++++++++++++++----There's soooo much inlining happening here. Perhaps we should have a "default to uninlined, unless a benefit is demonstrated" guideline?
Implementing this lock as a separate type as you suggested should help with the amount of inlining here. I'll try to keep it sane once I finalize that.
Re: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
In reply to Suren Baghdasaryaninclude/linux/mm.h static inline void vma_start_write(struct vm_area_struct *vma) · line 899
Quoted 9 lines · Suren Baghdasaryan
include/linux/mm.h +4
-1@@ -787,7 +893,10 @@ static inline void vma_start_write(struct vm_area_struct *vma)* we should use WRITE_ONCE() for cleanliness and to keep KCSAN happy. */ WRITE_ONCE (vma->vm_lock_seq, mm_lock_seq); -up_write (&vma->vm_lock.lock); +/* Write barrier to ensure vm_lock_seq change is visible before count */ +smp_wmb (); +rwsem_release (&vma->vm_lock.dep_map, _RET_IP_); +atomic_set (&vma->vm_lock.count,VMA_LOCK_UNLOCKED );
Too many barriers here. Just do atomic_set_release and remove that smp_wmb(). And what you are doing is really ensuring nothing leaks out of the critical region, so that comment should also be more generic.
I would expect regression testing to catch this sort of thing.
...
include/linux/mm_types.h struct mm_struct { · line 901
Quoted 2 lines
include/linux/mm_types.h +1
-0#ifdef CONFIG_PER_VMA_LOCK +struct wait_queue_head vma_writer_wait;
You might want to use rcuwait here instead, which is much more optimized for the single waiter requirement vmas have.
Thanks,
Davidlohr
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 16 lines · Davidlohr Bueso
include/linux/mm.h static inline void vma_start_write(struct vm_area_struct *vma) · line 899
Quoted 9 lines · Suren Baghdasaryan
include/linux/mm.h +4
-1@@ -787,7 +893,10 @@ static inline void vma_start_write(struct vm_area_struct *vma)* we should use WRITE_ONCE() for cleanliness and to keep KCSAN happy. */ WRITE_ONCE (vma->vm_lock_seq, mm_lock_seq); -up_write (&vma->vm_lock.lock); +/* Write barrier to ensure vm_lock_seq change is visible before count */ +smp_wmb (); +rwsem_release (&vma->vm_lock.dep_map, _RET_IP_); +atomic_set (&vma->vm_lock.count,VMA_LOCK_UNLOCKED );Too many barriers here. Just do
atomic_set_releaseand remove thatsmp_wmb(). And what you are doing is really ensuring nothing leaks out of the critical region, so that comment should also be more generic.
Uh, yes. I missed that.
Quoted 2 lines
I would expect regression testing to catch this sort of thing.
Well, it's in vma_start_write(), which is in the write-locking path. Maybe that's why it's not very visible.
Quoted 8 lines
...
Quoted 2 lines
#ifdef
CONFIG_PER_VMA_LOCK
+ structwait_queue_headvma_writer_wait;You might want to use rcuwait here instead, which is much more optimized for the single waiter requirement vmas have.
Thanks for the suggestion! I'll give it a try.
Quoted 3 lines
Thanks,
Davidlohr
Re: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
In reply to Suren BaghdasaryanQuoted 8 lines · Suren Baghdasaryan
When a reader takes read lock, it increments the atomic, unless the top two bits are set indicating a writer is present.
When writer takes write lock, it setsVMA_LOCK_WR_LOCKEDbit if there are no readers orVMA_LOCK_WR_WAITbit if readers are holding the lock and puts itself onto newly introduced mm.vma_writer_wait. Since all writers takemmap_lockin write mode first, there can be only one writer at a time. The last reader to release the lock will signal the writer to wake up.
I don't think you need two bits. You can do it this way:
0x8000'0000 - No readers, no writers 0x1-7fff'ffff - Some number of readers0x0 - Writer held
0x8000'0001-0xffff'ffff - Reader held, writer waiting
A prospective writer subtracts 0x8000'0000. If the result is 0, it got the lock, otherwise it sleeps until it is 0.
A writer unlocks by adding 0x8000'0000 (not by setting the value to 0x8000'0000).
A reader unlocks by adding 1. If the result is 0, it wakes the writer.
A prospective reader subtracts 1. If the result is positive, it got the lock, otherwise it does the unlock above (this might be the one which wakes the writer).
And ... that's it. See how we use the CPU arithmetic flags to tell us everything we need to know without doing arithmetic separately?
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 24 lines · Matthew Wilcox
Quoted 8 lines · Suren Baghdasaryan
When a reader takes read lock, it increments the atomic, unless the top two bits are set indicating a writer is present.
When writer takes write lock, it setsVMA_LOCK_WR_LOCKEDbit if there are no readers orVMA_LOCK_WR_WAITbit if readers are holding the lock and puts itself onto newly introduced mm.vma_writer_wait. Since all writers takemmap_lockin write mode first, there can be only one writer at a time. The last reader to release the lock will signal the writer to wake up.I don't think you need two bits. You can do it this way:
0x8000'0000 - No readers, no writers 0x1-7fff'ffff - Some number of readers
0x0- Writer held
0x8000'0001-0xffff'ffff - Reader held, writer waitingA prospective writer subtracts 0x8000'0000. If the result is 0, it got the lock, otherwise it sleeps until it is 0.
A writer unlocks by adding 0x8000'0000 (not by setting the value to 0x8000'0000).
Quoted 8 lines
A reader unlocks by adding 1. If the result is 0, it wakes the writer.
A prospective reader subtracts 1. If the result is positive, it got the lock, otherwise it does the unlock above (this might be the one which wakes the writer).
And ... that's it. See how we use the CPU arithmetic flags to tell us everything we need to know without doing arithmetic separately?
Yes, this is neat! You are using the fact that write-locked == no readers to eliminate unnecessary state. I'll give that a try. Thanks!
Quoted 1 line
Peter Zijlstra
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 31 lines · Suren Baghdasaryan
Quoted 30 lines · Matthew Wilcox
Quoted 8 lines · Suren Baghdasaryan
When a reader takes read lock, it increments the atomic, unless the top two bits are set indicating a writer is present.
When writer takes write lock, it setsVMA_LOCK_WR_LOCKEDbit if there are no readers orVMA_LOCK_WR_WAITbit if readers are holding the lock and puts itself onto newly introduced mm.vma_writer_wait. Since all writers takemmap_lockin write mode first, there can be only one writer at a time. The last reader to release the lock will signal the writer to wake up.I don't think you need two bits. You can do it this way:
0x8000'0000 - No readers, no writers 0x1-7fff'ffff - Some number of readers
0x0- Writer held
0x8000'0001-0xffff'ffff - Reader held, writer waitingA prospective writer subtracts 0x8000'0000. If the result is 0, it got the lock, otherwise it sleeps until it is 0.
A writer unlocks by adding 0x8000'0000 (not by setting the value to 0x8000'0000).
A reader unlocks by adding 1. If the result is 0, it wakes the writer.
A prospective reader subtracts 1. If the result is positive, it got the lock, otherwise it does the unlock above (this might be the one which wakes the writer).
Quoted 5 lines
Quoted 2 lines
And ... that's it. See how we use the CPU arithmetic flags to tell us everything we need to know without doing arithmetic separately?
Yes, this is neat! You are using the fact that write-locked == no readers to eliminate unnecessary state. I'll give that a try. Thanks!
The reason I got here is that Vlastimil poked me about the whole TYPESAFE_BY_RCU thing.
So the normal way those things work is with a refcount, if the refcount is non-zero, the identifying fields should be stable and you can determine if you have the right object, otherwise tough luck.
And I was thinking that since you abuse this rwsem you have, you might as well turn that into a refcount with some extra.
So I would propose a slightly different solution.
Replace vm_lock with vm_refcnt. Replace vm_detached with vm_refcnt == 0 -- that is, attach sets refcount to 1 to indicate it is part of the mas, detached is the final 'put'.
RCU lookup does the inc_not_zero thing, when increment succeeds, compare mm/addr to validate.
vma_start_write() already relies on mmap_lock being held for writing, and thus does not have to worry about writer-vs-writer contention, that is fully resolved by mmap_sem. This means we only need to wait for readers to drop out.
vma_start_write()
add(0x8000'0001); // could fetch_add and double check the high // bit wasn't already set. wait-until(refcnt == 0x8000'0002); // mas + writer ref WRITE_ONCE(vma->vm_lock_seq, mm_lock_seq); sub(0x8000'0000);
vma_end_write()
put();
vma_start_read() then becomes something like:
if (vm_lock_seq == mm_lock_seq)
return false;
cnt = fetch_inc(1);
if (cnt & msb || vm_lock_seq == mm_lock_seq) {
put();
return false;
}
return true;vma_end_read() then becomes:
put();
and the down_read() from uffffffd requires mmap_read_lock() and thus does not have to worry about writers, it can simpy be inc() and put(), no?
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 46 lines · Peter Zijlstra
Quoted 31 lines · Suren Baghdasaryan
Quoted 30 lines · Matthew Wilcox
Quoted 8 lines · Suren Baghdasaryan
When a reader takes read lock, it increments the atomic, unless the top two bits are set indicating a writer is present.
When writer takes write lock, it setsVMA_LOCK_WR_LOCKEDbit if there are no readers orVMA_LOCK_WR_WAITbit if readers are holding the lock and puts itself onto newly introduced mm.vma_writer_wait. Since all writers takemmap_lockin write mode first, there can be only one writer at a time. The last reader to release the lock will signal the writer to wake up.I don't think you need two bits. You can do it this way:
0x8000'0000 - No readers, no writers 0x1-7fff'ffff - Some number of readers
0x0- Writer held
0x8000'0001-0xffff'ffff - Reader held, writer waitingA prospective writer subtracts 0x8000'0000. If the result is 0, it got the lock, otherwise it sleeps until it is 0.
A writer unlocks by adding 0x8000'0000 (not by setting the value to 0x8000'0000).
A reader unlocks by adding 1. If the result is 0, it wakes the writer.
A prospective reader subtracts 1. If the result is positive, it got the lock, otherwise it does the unlock above (this might be the one which wakes the writer).
Quoted 5 lines
Quoted 2 lines
And ... that's it. See how we use the CPU arithmetic flags to tell us everything we need to know without doing arithmetic separately?
Yes, this is neat! You are using the fact that write-locked == no readers to eliminate unnecessary state. I'll give that a try. Thanks!
The reason I got here is that Vlastimil poked me about the whole
TYPESAFE_BY_RCUthing.So the normal way those things work is with a refcount, if the refcount is non-zero, the identifying fields should be stable and you can determine if you have the right object, otherwise tough luck.
Quoted 8 lines
And I was thinking that since you abuse this rwsem you have, you might as well turn that into a refcount with some extra.
So I would propose a slightly different solution.
Replace
vm_lockwithvm_refcnt. Replacevm_detachedwithvm_refcnt== 0 -- that is, attach sets refcount to 1 to indicate it is part of the mas, detached is the final 'put'.
I need to double-check if we ever write-lock a detached vma. I don't think we do but better be safe. If we do then that wait-until() should accept 0x8000'0001 as well.
Quoted 10 lines
RCU lookup does the
inc_not_zerothing, when increment succeeds, compare mm/addr to validate.
vma_start_write()already relies onmmap_lockbeing held for writing, and thus does not have to worry about writer-vs-writer contention, that is fully resolved bymmap_sem. This means we only need to wait for readers to drop out.
vma_start_write()
Quoted 8 lines
add(0x8000'0001); // could fetch_add and double check the high // bit wasn't already set. wait-until(refcnt == 0x8000'0002); // mas + writer ref WRITE_ONCE(vma->vm_lock_seq, mm_lock_seq); sub(0x8000'0000);
vma_end_write()put();
We don't really have vma_end_write(). Instead it's vma_end_write_all() which increments mm_lock_seq unlocking all write-locked VMAs. Therefore in vma_start_write() I think we can sub(0x8000'0001) at the end.
Quoted 14 lines
vma_start_read()then becomes something like:if (vm_lock_seq == mm_lock_seq) return false; cnt = fetch_inc(1); if (cnt & msb || vm_lock_seq == mm_lock_seq) { put(); return false; } return true;
Quoted 7 lines
vma_end_read()then becomes:put();and the
down_read()from uffffffd requiresmmap_read_lock()and thus does not have to worry about writers, it can simpy beinc()andput(), no?
I think your proposal should work. Let me try to code it and see if something breaks.
Thanks Peter!
Peter Zijlstra
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 7 lines · Suren Baghdasaryan
Quoted 3 lines
Replace
vm_lockwithvm_refcnt. Replacevm_detachedwithvm_refcnt== 0 -- that is, attach sets refcount to 1 to indicate it is part of the mas, detached is the final 'put'.I need to double-check if we ever write-lock a detached vma. I don't think we do but better be safe. If we do then that wait-until() should accept 0x8000'0001 as well.
vma_start_write()
__is_vma_write_locked()
mmap_assert_write_locked(vma->vm_mm);
So this really should hold afaict.
Quoted 15 lines
Quoted 15 lines
RCU lookup does the
inc_not_zerothing, when increment succeeds, compare mm/addr to validate.
vma_start_write()already relies onmmap_lockbeing held for writing, and thus does not have to worry about writer-vs-writer contention, that is fully resolved bymmap_sem. This means we only need to wait for readers to drop out.
vma_start_write()add(0x8000'0001); // could fetch_add and double check the high // bit wasn't already set. wait-until(refcnt == 0x8000'0002); // mas + writer ref WRITE_ONCE(vma->vm_lock_seq, mm_lock_seq); sub(0x8000'0000);
Quoted 7 lines
Quoted 2 lines
vma_end_write()put();We don't really have
vma_end_write(). Instead it'svma_end_write_all()which incrementsmm_lock_sequnlocking all write-locked VMAs. Therefore invma_start_write()I think we can sub(0x8000'0001) at the end.
Right, I know you don't, but you should :-), I've suggested adding this before.
Quoted 17 lines
Quoted 17 lines
vma_start_read()then becomes something like:if (vm_lock_seq == mm_lock_seq) return false; cnt = fetch_inc(1); if (cnt & msb || vm_lock_seq == mm_lock_seq) { put(); return false; } return true;
vma_end_read()then becomes:put();
Quoted 6 lines
Quoted 3 lines
and the
down_read()from uffffffd requiresmmap_read_lock()and thus does not have to worry about writers, it can simpy beinc()andput(), no?I think your proposal should work. Let me try to code it and see if something breaks.
Btw, for the wait-until() and put() you can use rcuwait; that is the simplest wait form we have. It's suitable because we only ever have the one waiter.
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 35 lines · Peter Zijlstra
Quoted 7 lines · Suren Baghdasaryan
Quoted 3 lines
Replace
vm_lockwithvm_refcnt. Replacevm_detachedwithvm_refcnt== 0 -- that is, attach sets refcount to 1 to indicate it is part of the mas, detached is the final 'put'.I need to double-check if we ever write-lock a detached vma. I don't think we do but better be safe. If we do then that wait-until() should accept 0x8000'0001 as well.
vma_start_write()
__is_vma_write_locked()mmap_assert_write_locked(vma->vm_mm);So this really should hold afaict.
Quoted 18 lines
Quoted 17 lines
RCU lookup does the
inc_not_zerothing, when increment succeeds, compare mm/addr to validate.
vma_start_write()already relies onmmap_lockbeing held for writing, and thus does not have to worry about writer-vs-writer contention, that is fully resolved bymmap_sem. This means we only need to wait for readers to drop out.
vma_start_write()add(0x8000'0001); // could fetch_add and double check the high // bit wasn't already set. wait-until(refcnt == 0x8000'0002); // mas + writer ref WRITE_ONCE(vma->vm_lock_seq, mm_lock_seq); sub(0x8000'0000);
vma_end_write()put();
Quoted 7 lines
Quoted 4 lines
We don't really have
vma_end_write(). Instead it'svma_end_write_all()which incrementsmm_lock_sequnlocking all write-locked VMAs. Therefore invma_start_write()I think we can sub(0x8000'0001) at the end.Right, I know you don't, but you should :-), I've suggested adding this before.
I'll look into adding it. IIRC there was some issue with that but I can't recall...
Quoted 22 lines
Quoted 22 lines
Quoted 21 lines
vma_start_read()then becomes something like:if (vm_lock_seq == mm_lock_seq) return false; cnt = fetch_inc(1); if (cnt & msb || vm_lock_seq == mm_lock_seq) { put(); return false; } return true;
vma_end_read()then becomes:put();and the
down_read()from uffffffd requiresmmap_read_lock()and thus does not have to worry about writers, it can simpy beinc()andput(), no?
Quoted 6 lines
Quoted 2 lines
I think your proposal should work. Let me try to code it and see if something breaks.
Btw, for the wait-until() and
put()you can use rcuwait; that is the simplest wait form we have. It's suitable because we only ever have the one waiter.
Yes, Davidlohr mentioned that before. I'll do that. Thanks!
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 42 lines · Suren Baghdasaryan
Quoted 40 lines · Peter Zijlstra
Quoted 7 lines · Suren Baghdasaryan
Quoted 3 lines
Replace
vm_lockwithvm_refcnt. Replacevm_detachedwithvm_refcnt== 0 -- that is, attach sets refcount to 1 to indicate it is part of the mas, detached is the final 'put'.I need to double-check if we ever write-lock a detached vma. I don't think we do but better be safe. If we do then that wait-until() should accept 0x8000'0001 as well.
vma_start_write()
__is_vma_write_locked()mmap_assert_write_locked(vma->vm_mm);So this really should hold afaict.
Quoted 22 lines
Quoted 9 lines
RCU lookup does the
inc_not_zerothing, when increment succeeds, compare mm/addr to validate.
vma_start_write()already relies onmmap_lockbeing held for writing, and thus does not have to worry about writer-vs-writer contention, that is fully resolved bymmap_sem. This means we only need to wait for readers to drop out.
vma_start_write()Quoted 8 lines
add(0x8000'0001); // could fetch_add and double check the high // bit wasn't already set. wait-until(refcnt == 0x8000'0002); // mas + writer ref WRITE_ONCE(vma->vm_lock_seq, mm_lock_seq); sub(0x8000'0000);
vma_end_write()put();We don't really have
vma_end_write(). Instead it'svma_end_write_all()which incrementsmm_lock_sequnlocking all write-locked VMAs. Therefore invma_start_write()I think we can sub(0x8000'0001) at the end.
Quoted 30 lines
Quoted 2 lines
Right, I know you don't, but you should :-), I've suggested adding this before.
I'll look into adding it. IIRC there was some issue with that but I can't recall...
Quoted 24 lines
Quoted 24 lines
Quoted 14 lines
vma_start_read()then becomes something like:if (vm_lock_seq == mm_lock_seq) return false; cnt = fetch_inc(1); if (cnt & msb || vm_lock_seq == mm_lock_seq) { put(); return false; } return true;Quoted 7 lines
vma_end_read()then becomes:put();and the
down_read()from uffffffd requiresmmap_read_lock()and thus does not have to worry about writers, it can simpy beinc()andput(), no?I think your proposal should work. Let me try to code it and see if something breaks.
Ok, I tried it out and things are a bit more complex:
1. We should allow write-locking a detached VMA, IOW vma_start_write() can be called when vm_refcnt is 0. In that situation add(0x8000'0001) leads to "addition on 0; use-after-free". Maybe I can introduce a new refcnt function which does not complain when adding to 0?
2. Adding 0x80000000 saturates refcnt, so I have to use a lower bit 0x40000000 to denote writers.
3. Currently vma_mark_attached() can be called on an already attached VMA. With vma->detached being a separate attribute that works fine but when we combine it with the vm_lock things break (extra attach would leak into lock count). I'll see if I can catch all the cases when we do this and clean them up (not call vma_mark_attached() when not necessary).
Quoted 6 lines
Quoted 4 lines
Btw, for the wait-until() and
put()you can use rcuwait; that is the simplest wait form we have. It's suitable because we only ever have the one waiter.Yes, Davidlohr mentioned that before. I'll do that. Thanks!
Peter Zijlstra
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 6 lines · Suren Baghdasaryan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I think your proposal should work. Let me try to code it and see if something breaks.
Ok, I tried it out and things are a bit more complex:
1. We should allow write-locking a detached VMA, IOWvma_start_write()can be called whenvm_refcntis 0.
This sounds dodgy, refcnt being zero basically means the object is dead and you shouldn't be touching it no more. Where does this happen and why?
Notably, it being 0 means it is no longer in the mas tree and can't be found anymore.
Quoted 2 lines
2. Adding
0x80000000saturates refcnt, so I have to use a lower bit0x40000000to denote writers.
I'm confused, what? We're talking about atomic_t, right?
Quoted 6 lines
3. Currently
vma_mark_attached()can be called on an already attached VMA. Withvma->detachedbeing a separate attribute that works fine but when we combine it with thevm_lockthings break (extra attach would leak into lock count). I'll see if I can catch all the cases when we do this and clean them up (not callvma_mark_attached()when not necessary).
Right, I hadn't looked at that thing in detail, that sounds like it needs a wee cleanup like you suggest.
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 10 lines · Peter Zijlstra
Quoted 6 lines · Suren Baghdasaryan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I think your proposal should work. Let me try to code it and see if something breaks.
Ok, I tried it out and things are a bit more complex:
1. We should allow write-locking a detached VMA, IOWvma_start_write()can be called whenvm_refcntis 0.
Quoted 6 lines
This sounds dodgy, refcnt being zero basically means the object is dead and you shouldn't be touching it no more. Where does this happen and why?
Notably, it being 0 means it is no longer in the mas tree and can't be found anymore.
It happens when a newly created vma that was not yet attached (vma->vm_refcnt = 0) is write-locked before being added into the vma tree. For example:mmap()
mmap_write_lock()
vma = vm_area_alloc() // vma->vm_refcnt = 0 (detached) //vma attributes are initialized
vma_start_write() // write 0x8000 0001 into vma->vm_refcnt mas_store_gfp()
vma_mark_attached()
mmap_write_lock() // vma_end_write_all()
In this scenario, we write-lock the VMA before adding it into the tree to prevent readers (pagefaults) from using it until we drop the mmap_write_lock(). In your proposal, the first thing vma_start_write() does is add(0x8000'0001) and that will trigger a warning.
For now instead of add(0x8000'0001) I can play this game to avoid the warning:
if (refcount_inc_not_zero(&vma->vm_refcnt))
refcount_add(0x80000000, &vma->vm_refcnt);
else
refcount_set(&vma->vm_refcnt, 0x80000001);this refcount_set() works because vma with vm_refcnt==0 could not be found by readers. I'm not sure this will still work when we add TYPESAFE_BY_RCU and introduce vma reuse possibility.
Quoted 5 lines
Quoted 3 lines
2. Adding
0x80000000saturates refcnt, so I have to use a lower bit0x40000000to denote writers.I'm confused, what? We're talking about
atomic_t, right?
I thought you suggested using refcount_t. According to
https://elixir.bootlin.com/linux/v6.13-rc2/source/include/linux/refcount.h#L22
valid values would be [0..0x7fff_ffff] and 0x80000000 is outside of that range. What am I missing?
Quoted 10 lines
Quoted 7 lines
3. Currently
vma_mark_attached()can be called on an already attached VMA. Withvma->detachedbeing a separate attribute that works fine but when we combine it with thevm_lockthings break (extra attach would leak into lock count). I'll see if I can catch all the cases when we do this and clean them up (not callvma_mark_attached()when not necessary).Right, I hadn't looked at that thing in detail, that sounds like it needs a wee cleanup like you suggest.
Yes, I'll embark on that today. Will see how much of a problem that is.
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 19 lines · Suren Baghdasaryan
Quoted 10 lines · Peter Zijlstra
Quoted 6 lines · Suren Baghdasaryan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I think your proposal should work. Let me try to code it and see if something breaks.
Ok, I tried it out and things are a bit more complex:
1. We should allow write-locking a detached VMA, IOWvma_start_write()can be called whenvm_refcntis 0.Quoted 6 lines
This sounds dodgy, refcnt being zero basically means the object is dead and you shouldn't be touching it no more. Where does this happen and why?
Notably, it being 0 means it is no longer in the mas tree and can't be found anymore.
Quoted 11 lines
It happens when a newly created vma that was not yet attached (
vma->vm_refcnt= 0) is write-locked before being added into the vma tree. For example:mmap()
mmap_write_lock()
vma =vm_area_alloc()//vma->vm_refcnt= 0 (detached) //vma attributes are initialized
vma_start_write()// write0x80000001 intovma->vm_refcntmas_store_gfp()
vma_mark_attached()
mmap_write_lock()//vma_end_write_all()
s/mmap_write_lock()/mmap_write_unlock()
Quoted 39 lines
In this scenario, we write-lock the VMA before adding it into the tree to prevent readers (pagefaults) from using it until we drop the
mmap_write_lock(). In your proposal, the first thingvma_start_write()does is add(0x8000'0001) and that will trigger a warning.
For now instead of add(0x8000'0001) I can play this game to avoid the warning:if (
refcount_inc_not_zero(&vma->vm_refcnt))refcount_add(0x80000000, &vma->vm_refcnt); else refcount_set(&vma->vm_refcnt, 0x80000001);this
refcount_set()works because vma with vm_refcnt==0 could not be found by readers. I'm not sure this will still work when we addTYPESAFE_BY_RCUand introduce vma reuse possibility.Quoted 5 lines
Quoted 3 lines
2. Adding
0x80000000saturates refcnt, so I have to use a lower bit0x40000000to denote writers.I'm confused, what? We're talking about
atomic_t, right?I thought you suggested using
refcount_t. According to
https://elixir.bootlin.com/linux/v6.13-rc2/source/include/linux/refcount.h#L22
valid values would be [0..0x7fff_ffff] and0x80000000is outside of that range. What am I missing?Quoted 10 lines
Quoted 7 lines
3. Currently
vma_mark_attached()can be called on an already attached VMA. Withvma->detachedbeing a separate attribute that works fine but when we combine it with thevm_lockthings break (extra attach would leak into lock count). I'll see if I can catch all the cases when we do this and clean them up (not callvma_mark_attached()when not necessary).Right, I hadn't looked at that thing in detail, that sounds like it needs a wee cleanup like you suggest.
Yes, I'll embark on that today. Will see how much of a problem that is.
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 33 lines · Suren Baghdasaryan
Quoted 19 lines · Suren Baghdasaryan
Quoted 10 lines · Peter Zijlstra
Quoted 6 lines · Suren Baghdasaryan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I think your proposal should work. Let me try to code it and see if something breaks.
Ok, I tried it out and things are a bit more complex:
1. We should allow write-locking a detached VMA, IOWvma_start_write()can be called whenvm_refcntis 0.Quoted 6 lines
This sounds dodgy, refcnt being zero basically means the object is dead and you shouldn't be touching it no more. Where does this happen and why?
Notably, it being 0 means it is no longer in the mas tree and can't be found anymore.
Quoted 11 lines
It happens when a newly created vma that was not yet attached (
vma->vm_refcnt= 0) is write-locked before being added into the vma tree. For example:mmap()
mmap_write_lock()
vma =vm_area_alloc()//vma->vm_refcnt= 0 (detached) //vma attributes are initialized
vma_start_write()// write0x80000001 intovma->vm_refcntmas_store_gfp()
vma_mark_attached()
mmap_write_lock()//vma_end_write_all()
Quoted 40 lines
s/mmap_write_lock()/mmap_write_unlock()
Quoted 39 lines
In this scenario, we write-lock the VMA before adding it into the tree to prevent readers (pagefaults) from using it until we drop the
mmap_write_lock(). In your proposal, the first thingvma_start_write()does is add(0x8000'0001) and that will trigger a warning.
For now instead of add(0x8000'0001) I can play this game to avoid the warning:if (
refcount_inc_not_zero(&vma->vm_refcnt))refcount_add(0x80000000, &vma->vm_refcnt); else refcount_set(&vma->vm_refcnt, 0x80000001);this
refcount_set()works because vma with vm_refcnt==0 could not be found by readers. I'm not sure this will still work when we addTYPESAFE_BY_RCUand introduce vma reuse possibility.Quoted 5 lines
Quoted 3 lines
2. Adding
0x80000000saturates refcnt, so I have to use a lower bit0x40000000to denote writers.I'm confused, what? We're talking about
atomic_t, right?I thought you suggested using
refcount_t. According to
https://elixir.bootlin.com/linux/v6.13-rc2/source/include/linux/refcount.h#L22
valid values would be [0..0x7fff_ffff] and0x80000000is outside of that range. What am I missing?Quoted 10 lines
Quoted 7 lines
3. Currently
vma_mark_attached()can be called on an already attached VMA. Withvma->detachedbeing a separate attribute that works fine but when we combine it with thevm_lockthings break (extra attach would leak into lock count). I'll see if I can catch all the cases when we do this and clean them up (not callvma_mark_attached()when not necessary).Right, I hadn't looked at that thing in detail, that sounds like it needs a wee cleanup like you suggest.
Yes, I'll embark on that today. Will see how much of a problem that is.
Ok, I think I was able to implement this in a way that ignores duplicate attach/detach calls. One issue that I hit and don't know a good way to fix is a circular dependency in the header files once I try adding rcuwait into mm_struct. Once I include rcuwait.h into mm_types.h leads to the following cycle:
In file included from ./arch/x86/include/asm/uaccess.h:12,
from ./include/linux/uaccess.h:12,
from ./include/linux/sched/task.h:13,
from ./include/linux/sched/signal.h:9,
from ./include/linux/rcuwait.h:6,
from ./include/linux/mm_types.h:22,./arch/x86/include/asm/uaccess.h includes mm_types.h. But in fact there is a shorter cycle:
rcuwait.h needs signal.h since it uses uses inlined signal_pending_state() signal.h needs mm_types.h since it uses vm_fault_t
The way I worked around it for now is by removing signal.h include from rcuwait.h and wrapping signal_pending_state() into a non-inlined function so I can forward-declare it. That requires adding linux/sched/signal.h or linux/sched/task.h into many other places:
arch/x86/coco/sev/core.c | 1 + arch/x86/kernel/fpu/xstate.c | 1 + block/blk-lib.c | 1 + block/ioctl.c | 1 + drivers/accel/qaic/qaic_control.c | 1 + drivers/base/firmware_loader/main.c | 1 + drivers/block/ublk_drv.c | 1 + drivers/crypto/ccp/sev-dev.c | 1 + drivers/dma-buf/heaps/cma_heap.c | 1 + drivers/dma-buf/heaps/system_heap.c | 1 + drivers/gpio/gpio-sloppy-logic-analyzer.c | 1 + drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 1 + drivers/iommu/iommufd/ioas.c | 1 + drivers/iommu/iommufd/pages.c | 1 + .../staging/vc04_services/interface/vchiq_arm/vchiq_dev.c | 1 + drivers/tty/n_tty.c | 1 + fs/bcachefs/fs-io-buffered.c | 1 + fs/bcachefs/journal_reclaim.c | 1 + fs/bcachefs/thread_with_file.c | 1 + fs/bcachefs/util.c | 1 + fs/btrfs/defrag.h | 1 + fs/btrfs/fiemap.c | 2 ++ fs/btrfs/free-space-cache.h | 1 + fs/btrfs/reflink.c | 1 + fs/exfat/balloc.c | 1 + fs/gfs2/ops_fstype.c | 1 + fs/kernel_read_file.c | 1 + fs/netfs/buffered_write.c | 1 + fs/zonefs/file.c | 1 + include/linux/fs.h | 2 +- include/linux/rcuwait.h | 4 ++-- io_uring/io_uring.h | 1 + kernel/dma/map_benchmark.c | 1 + kernel/futex/core.c | 1 + kernel/futex/pi.c | 1 + kernel/rcu/update.c | 5 +++++ kernel/task_work.c | 1 + lib/kunit/user_alloc.c | 1 + mm/damon/vaddr.c | 1 + mm/memcontrol-v1.c | 1 + mm/shrinker_debug.c | 1 + net/dns_resolver/dns_key.c | 1 + 42 files changed, 48 insertions(+), 3 deletions(-)
I'm not sure if this is the best way to deal with this circular dependency. Any other ideas?
Peter Zijlstra
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 2 lines · Suren Baghdasaryan
I'm not sure if this is the best way to deal with this circular dependency. Any other ideas?
Move the waiting into an out-of-line slow-path?
if (atomic_read(&vma->refcnt) != 2)
__vma_write_start_wait(mm, vma);or somesuch..
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 10 lines · Peter Zijlstra
Quoted 2 lines · Suren Baghdasaryan
I'm not sure if this is the best way to deal with this circular dependency. Any other ideas?
Move the waiting into an out-of-line slow-path?
if (atomic_read(&vma->refcnt) != 2) __vma_write_start_wait(mm, vma);
The problem is not a function but the addition of struct rcuwait into struct mm_struct. The type should be known and I don't want to add it via a pointer to avoid extra dereferences. After thinking it over, I think the simplest way would be to move the definition of struct rcuwait into a separate header and include that header in mm_types.h. That, with some uninlining like you suggested, should do the trick.
Quoted 2 lines
or somesuch..
Re: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 3 lines · Suren Baghdasaryan
think the simplest way would be to move the definition of struct rcuwait into a separate header and include that header in
mm_types.h. That, with some uninlining like you suggested, should do the trick.
I'd suggest struct rcuwait should live in types.h alongside list_head, rcuref and so on.
Peter Zijlstra
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
In reply to Suren BaghdasaryanQuoted 7 lines · Suren Baghdasaryan
Quoted 6 lines · Peter Zijlstra
Quoted 2 lines · Suren Baghdasaryan
I'm not sure if this is the best way to deal with this circular dependency. Any other ideas?
Quoted 6 lines
Quoted 4 lines
Move the waiting into an out-of-line slow-path?
if (atomic_read(&vma->refcnt) != 2) __vma_write_start_wait(mm, vma);The problem is not a function but the addition of struct rcuwait into
Durr, in my brain that was a struct task_struct pointer, totally forgot we had a type there. Yeah, as Willy says, move it to compiler_types.h or somesuch.
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 11 lines · Peter Zijlstra
Quoted 9 lines · Suren Baghdasaryan
Quoted 8 lines · Peter Zijlstra
Quoted 2 lines · Suren Baghdasaryan
I'm not sure if this is the best way to deal with this circular dependency. Any other ideas?
Move the waiting into an out-of-line slow-path?
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
if (atomic_read(&vma->refcnt) != 2) __vma_write_start_wait(mm, vma);The problem is not a function but the addition of struct rcuwait into
Durr, in my brain that was a struct
task_structpointer, totally forgot we had a type there. Yeah, as Willy says, move it tocompiler_types.hor somesuch.
Got it. Thank you both!
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 16 lines · Suren Baghdasaryan
Quoted 14 lines · Peter Zijlstra
Quoted 12 lines · Suren Baghdasaryan
Quoted 10 lines · Peter Zijlstra
Quoted 2 lines · Suren Baghdasaryan
I'm not sure if this is the best way to deal with this circular dependency. Any other ideas?
Move the waiting into an out-of-line slow-path?
if (atomic_read(&vma->refcnt) != 2) __vma_write_start_wait(mm, vma);
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
The problem is not a function but the addition of struct rcuwait into
Durr, in my brain that was a struct
task_structpointer, totally forgot we had a type there. Yeah, as Willy says, move it tocompiler_types.hor somesuch.Got it. Thank you both!
I posted the implementation of the mechanism we discussed here at:
https://lore.kernel.org/all/[email protected]/
It ended up becoming a large patchset but most patches are very small logical units.
Feedback is greatly appreciated!
Peter Zijlstra
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
In reply to Suren BaghdasaryanQuoted 30 lines · Suren Baghdasaryan
Quoted 10 lines · Peter Zijlstra
Quoted 6 lines · Suren Baghdasaryan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I think your proposal should work. Let me try to code it and see if something breaks.
Ok, I tried it out and things are a bit more complex:
1. We should allow write-locking a detached VMA, IOWvma_start_write()can be called whenvm_refcntis 0.Quoted 6 lines
This sounds dodgy, refcnt being zero basically means the object is dead and you shouldn't be touching it no more. Where does this happen and why?
Notably, it being 0 means it is no longer in the mas tree and can't be found anymore.
It happens when a newly created vma that was not yet attached (
vma->vm_refcnt= 0) is write-locked before being added into the vma tree. For example:mmap()
mmap_write_lock()
vma =vm_area_alloc()//vma->vm_refcnt= 0 (detached) //vma attributes are initialized
vma_start_write()// write0x80000001 intovma->vm_refcntmas_store_gfp()
vma_mark_attached()
mmap_write_lock()//vma_end_write_all()
Quoted 3 lines
In this scenario, we write-lock the VMA before adding it into the tree to prevent readers (pagefaults) from using it until we drop the
mmap_write_lock().
Ah, but you can do that by setting vma->vm_lock_seq and setting the ref to 1 before adding it (its not visible before adding anyway, so nobody cares).
You'll note that the read thing checks both the msb (or other high bit depending on the actual type you're going with) *and* the seq. That is needed because we must not set the sequence number before all existing readers are drained, but since this is pre-add that is not a concern.
Quoted 9 lines
Quoted 4 lines
Quoted 2 lines
2. Adding
0x80000000saturates refcnt, so I have to use a lower bit0x40000000to denote writers.I'm confused, what? We're talking about
atomic_t, right?I thought you suggested using
refcount_t. According to
https://elixir.bootlin.com/linux/v6.13-rc2/source/include/linux/refcount.h#L22
valid values would be [0..0x7fff_ffff] and0x80000000is outside of that range. What am I missing?
I was talking about atomic_t :-), but yeah, maybe we can use refcount_t, but I hadn't initially considered that.
Suren Baghdasaryan
maintainerRe: [PATCH 3/4] mm: replace rw_semaphore with atomic_t in vma_lock
Quoted 36 lines · Peter Zijlstra
Quoted 30 lines · Suren Baghdasaryan
Quoted 10 lines · Peter Zijlstra
Quoted 6 lines · Suren Baghdasaryan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I think your proposal should work. Let me try to code it and see if something breaks.
Ok, I tried it out and things are a bit more complex:
1. We should allow write-locking a detached VMA, IOWvma_start_write()can be called whenvm_refcntis 0.Quoted 6 lines
This sounds dodgy, refcnt being zero basically means the object is dead and you shouldn't be touching it no more. Where does this happen and why?
Notably, it being 0 means it is no longer in the mas tree and can't be found anymore.
It happens when a newly created vma that was not yet attached (
vma->vm_refcnt= 0) is write-locked before being added into the vma tree. For example:mmap()
mmap_write_lock()
vma =vm_area_alloc()//vma->vm_refcnt= 0 (detached) //vma attributes are initialized
vma_start_write()// write0x80000001 intovma->vm_refcntmas_store_gfp()
vma_mark_attached()
mmap_write_lock()//vma_end_write_all()Quoted 3 lines
In this scenario, we write-lock the VMA before adding it into the tree to prevent readers (pagefaults) from using it until we drop the
mmap_write_lock().
Quoted 8 lines
Ah, but you can do that by setting
vma->vm_lock_seqand setting the ref to 1 before adding it (its not visible before adding anyway, so nobody cares).You'll note that the read thing checks both the msb (or other high bit depending on the actual type you're going with) *and* the seq. That is needed because we must not set the sequence number before all existing readers are drained, but since this is pre-add that is not a concern.
Yes, I realized that there is an interesting rule that help in this
case: vma_mark_attached() is called only on a newly created vma which can't be found by anyone else or the vma is already locked, therefore vma_start_write() can never race with vma_mark_attached(). Considering that vma_mark_attached() is the only one that can raise vma->vm_refcnt from 0, vma_start_write() can set vma->vm_lock_seq without modifying vma->vm_refcnt at all if vma->vm_refcnt==0.
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
2. Adding
0x80000000saturates refcnt, so I have to use a lower bit0x40000000to denote writers.I'm confused, what? We're talking about
atomic_t, right?
Quoted 7 lines
Quoted 4 lines
I thought you suggested using
refcount_t. According to
https://elixir.bootlin.com/linux/v6.13-rc2/source/include/linux/refcount.h#L22
valid values would be [0..0x7fff_ffff] and0x80000000is outside of that range. What am I missing?I was talking about
atomic_t:-), but yeah, maybe we can userefcount_t, but I hadn't initially considered that.
My current implementation is using refcount_t but I might have to change that to atomic_t to handle vm_refcnt overflows in vma_start_read().
Quoted 1 line
Suren Baghdasaryan
maintainerPATCH 4/4 mm: move lesser used vma_area_struct members into the last cacheline
In reply to Suren BaghdasaryanMove several vma_area_struct members which are rarely or never used during page fault handling into the last cacheline to better pack vm_area_struct. As a result vm_area_struct will fit into 3 cachelines as opposed to 4 cachelines before this change. New vm_area_struct layout:
struct vm_area_struct {
union {
struct {
long unsigned int vm_start; /* 0 8 */
long unsigned int vm_end; /* 8 8 */
}; /* 0 16 */
struct callback_head vm_rcu ; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
struct mm_struct * vm_mm; /* 16 8 */
pgprot_t vm_page_prot; /* 24 8 */
union {
const vm_flags_t vm_flags; /* 32 8 */
vm_flags_t __vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 */
/* XXX 3 bytes hole, try to pack */
unsigned int vm_lock_seq; /* 44 4 */
struct list_head anon_vma_chain; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct anon_vma * anon_vma; /* 64 8 */
const struct vm_operations_struct * vm_ops; /* 72 8 */
long unsigned int vm_pgoff; /* 80 8 */
struct file * vm_file; /* 88 8 */
void * vm_private_data; /* 96 8 */
atomic_long_t swap_readahead_info; /* 104 8 */
struct mempolicy * vm_policy; /* 112 8 */
/* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
struct vma_lock vm_lock (__aligned__(64)); /* 128 4 */
/* XXX 4 bytes hole, try to pack */
struct {
struct rb_node rb (__aligned__(8)); /* 136 24 */
long unsigned int rb_subtree_last; /* 160 8 */
} __attribute__((__aligned__(8))) shared; /* 136 32 */
struct vm_userfaultfd_ctx vm_userfaultfd_ctx; /* 168 0 */
/* size: 192, cachelines: 3, members: 17 */
/* sum members: 153, holes: 3, sum holes: 15 */
/* padding: 24 */
/* forced alignments: 3, forced holes: 2, sum forced holes: 12 */
} __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages:
slabinfo after vm_area_struct changes:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct ... 192 42 2 : ...
--- include/linux/mm_types.h | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-)
include/linux/mm_types.h +18 -19
@@ -733,16 +733,6 @@ struct vm_area_struct {unsigned int vm_lock_seq;#endif -/* -* For areas with an address space and backing store, -* linkage into the address_space->i_mmap interval tree. -* -*/ -struct { -struct rb_node rb; -unsigned long rb_subtree_last; - } shared; -/* * A file's MAP_PRIVATE vma can be in both i_mmap tree and anon_vma * list, after a COW of one of the file pages. A MAP_SHARED vma
@@ -762,14 +752,6 @@ struct vm_area_struct {struct file * vm_file;/* File we map to (can be NULL). */ void * vm_private_data;/* was vm_pte (shared mem) */ -#ifdef CONFIG_ANON_VMA_NAME -/* -* For private and shared anonymous mappings, a pointer to a null -* terminated string containing the name given to the vma, or NULL if -* unnamed. Serialized by mmap_lock. Use anon_vma_name to access. -*/ -struct anon_vma_name *anon_name; -#endif #ifdef CONFIG_SWAP atomic_long_t swap_readahead_info;#endif
@@ -782,11 +764,28 @@ struct vm_area_struct {#ifdef CONFIG_NUMA_BALANCING struct vma_numab_state *numab_state;/* NUMA Balancing state */ #endif -struct vm_userfaultfd_ctx vm_userfaultfd_ctx;#ifdef CONFIG_PER_VMA_LOCK /* Unstable RCU readers are allowed to read this. */ struct vma_lock vm_lock____cacheline_aligned_in_smp ;#endif +/* +* For areas with an address space and backing store, +* linkage into the address_space->i_mmap interval tree. +* +*/ +struct { +struct rb_node rb; +unsigned long rb_subtree_last; + } shared; +#ifdef CONFIG_ANON_VMA_NAME +/* +* For private and shared anonymous mappings, a pointer to a null +* terminated string containing the name given to the vma, or NULL if +* unnamed. Serialized by mmap_lock. Use anon_vma_name to access. +*/ +struct anon_vma_name *anon_name; +#endif +struct vm_userfaultfd_ctx vm_userfaultfd_ctx; } __randomize_layout;#ifdef CONFIG_NUMA
Signature · 1 line
2.47.0.277.g8800431eea-goog
Re: [PATCH 4/4] mm: move lesser used vma_area_struct members into the last cacheline
Quoted 39 lines · Suren Baghdasaryan
Move several
vma_area_structmembers which are rarely or never used during page fault handling into the last cacheline to better packvm_area_struct. As a resultvm_area_structwill fit into 3 cachelines as opposed to 4 cachelines before this change. Newvm_area_structlayout:struct
vm_area_struct{
union {
struct {
long unsigned intvm_start; /* 0 8 */
long unsigned intvm_end; /* 8 8 */
}; /* 0 16 */
structcallback_headvm_rcu; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
structmm_struct*vm_mm; /* 16 8 */
pgprot_tvm_page_prot; /* 24 8 */
union {
constvm_flags_tvm_flags; /* 32 8 */
vm_flags_t__vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 *//* XXX 3 bytes hole, try to pack */
unsigned int
vm_lock_seq; /* 44 4 */
structlist_headanon_vma_chain; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
structanon_vma*anon_vma; /* 64 8 */
const structvm_operations_struct*vm_ops; /* 72 8 */
long unsigned intvm_pgoff; /* 80 8 */
struct file *vm_file; /* 88 8 */
void *vm_private_data; /* 96 8 */
atomic_long_tswap_readahead_info; /* 104 8 */
struct mempolicy *vm_policy; /* 112 8 *//* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
structvma_lockvm_lock(__aligned__(64)); /* 128 4 */
Quoted 7 lines
/* XXX 4 bytes hole, try to pack */
struct {
structrb_noderb (__aligned__(8)); /* 136 24 */
long unsigned intrb_subtree_last; /* 160 8 */
} __attribute__((__aligned__(8))) shared; /* 136 32 */
structvm_userfaultfd_ctxvm_userfaultfd_ctx; /* 168 0 */
I don't see anon_name in the output, I thought it was added for Android? :)
Quoted 4 lines
/* size: 192, cachelines: 3, members: 17 */ /* sum members: 153, holes: 3, sum holes: 15 */ /* padding: 24 */
Instead you seem to have padding so an attempt to use SLAB_TYPESAFE_BY_RCU should use that and not add more up to 256 pages.
Perhaps this pahole output wasn't generated with a fully representative config?
Quoted 82 lines
/* forced alignments: 3, forced holes: 2, sum forced holes: 12 */ } __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages:
slabinfo after
vm_area_structchanges:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 192 42 2 : ...Signed-off-by Suren Baghdasaryan <[email protected]>--- include/linux/mm_types.h | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-)include/linux/mm_types.h +18
-19@@ -733,16 +733,6 @@ struct vm_area_struct {unsigned int vm_lock_seq;#endif -/* -* For areas with an address space and backing store, -* linkage into the address_space->i_mmap interval tree. -* -*/ -struct { -struct rb_node rb; -unsigned long rb_subtree_last; - } shared; -/* * A file's MAP_PRIVATE vma can be in both i_mmap tree and anon_vma * list, after a COW of one of the file pages. A MAP_SHARED vma @@ -762,14 +752,6 @@ struct vm_area_struct {struct file * vm_file;/* File we map to (can be NULL). */ void * vm_private_data;/* was vm_pte (shared mem) */ -#ifdef CONFIG_ANON_VMA_NAME -/* -* For private and shared anonymous mappings, a pointer to a null -* terminated string containing the name given to the vma, or NULL if -* unnamed. Serialized by mmap_lock. Use anon_vma_name to access. -*/ -struct anon_vma_name *anon_name; -#endif #ifdef CONFIG_SWAP atomic_long_t swap_readahead_info;#endif @@ -782,11 +764,28 @@ struct vm_area_struct {#ifdef CONFIG_NUMA_BALANCING struct vma_numab_state *numab_state;/* NUMA Balancing state */ #endif -struct vm_userfaultfd_ctx vm_userfaultfd_ctx;#ifdef CONFIG_PER_VMA_LOCK /* Unstable RCU readers are allowed to read this. */ struct vma_lock vm_lock____cacheline_aligned_in_smp ;#endif +/* +* For areas with an address space and backing store, +* linkage into the address_space->i_mmap interval tree. +* +*/ +struct { +struct rb_node rb; +unsigned long rb_subtree_last; + } shared; +#ifdef CONFIG_ANON_VMA_NAME +/* +* For private and shared anonymous mappings, a pointer to a null +* terminated string containing the name given to the vma, or NULL if +* unnamed. Serialized by mmap_lock. Use anon_vma_name to access. +*/ +struct anon_vma_name *anon_name; +#endif +struct vm_userfaultfd_ctx vm_userfaultfd_ctx; } __randomize_layout;#ifdef CONFIG_NUMA
Suren Baghdasaryan
maintainerRe: [PATCH 4/4] mm: move lesser used vma_area_struct members into the last cacheline
Quoted 43 lines · Vlastimil Babka
Quoted 41 lines · Suren Baghdasaryan
Move several
vma_area_structmembers which are rarely or never used during page fault handling into the last cacheline to better packvm_area_struct. As a resultvm_area_structwill fit into 3 cachelines as opposed to 4 cachelines before this change. Newvm_area_structlayout:struct
vm_area_struct{
union {
struct {
long unsigned intvm_start; /* 0 8 */
long unsigned intvm_end; /* 8 8 */
}; /* 0 16 */
structcallback_headvm_rcu; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
structmm_struct*vm_mm; /* 16 8 */
pgprot_tvm_page_prot; /* 24 8 */
union {
constvm_flags_tvm_flags; /* 32 8 */
vm_flags_t__vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 *//* XXX 3 bytes hole, try to pack */
unsigned int
vm_lock_seq; /* 44 4 */
structlist_headanon_vma_chain; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
structanon_vma*anon_vma; /* 64 8 */
const structvm_operations_struct*vm_ops; /* 72 8 */
long unsigned intvm_pgoff; /* 80 8 */
struct file *vm_file; /* 88 8 */
void *vm_private_data; /* 96 8 */
atomic_long_tswap_readahead_info; /* 104 8 */
struct mempolicy *vm_policy; /* 112 8 *//* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
structvma_lockvm_lock(__aligned__(64)); /* 128 4 *//* XXX 4 bytes hole, try to pack */
Quoted 7 lines
Quoted 5 lines
struct { struct rb_node rb (__aligned__(8)); /* 136 24 */ long unsigned int rb_subtree_last; /* 160 8 */ } __attribute__((__aligned__(8))) shared; /* 136 32 */ struct vm_userfaultfd_ctx vm_userfaultfd_ctx; /* 168 0 */I don't see
anon_namein the output, I thought it was added for Android? :)
Yes, this output is generated with defconfig. That's why you see some holes in this structure. On my x86 machine I have non-zero vm_userfaultfd_ctx and numab_state, on Android I have vm_userfaultfd_ctx and anon_name.
Quoted 8 lines
Quoted 5 lines
/* size: 192, cachelines: 3, members: 17 */ /* sum members: 153, holes: 3, sum holes: 15 */ /* padding: 24 */Instead you seem to have padding so an attempt to use
SLAB_TYPESAFE_BY_RCUshould use that and not add more up to 256 pages.
Yes, thanks for the tip about SLAB_TYPESAFE_BY_RCU freelist. In actual configurations where I saw SLAB_TYPESAFE_BY_RCU causing this structure to grow I had less padding at the end.
Quoted 1 line
Perhaps this pahole output wasn't generated with a fully representative config?
You are right. I'll replace it with the actual output from my x86 setup (Android probably has a smaller interested audience).
Quoted 84 lines
Quoted 83 lines
/* forced alignments: 3, forced holes: 2, sum forced holes: 12 */ } __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages:
slabinfo after
vm_area_structchanges:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 192 42 2 : ...Signed-off-by Suren Baghdasaryan <[email protected]>--- include/linux/mm_types.h | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-)include/linux/mm_types.h +18
-19@@ -733,16 +733,6 @@ struct vm_area_struct {unsigned int vm_lock_seq;#endif -/* -* For areas with an address space and backing store, -* linkage into the address_space->i_mmap interval tree. -* -*/ -struct { -struct rb_node rb; -unsigned long rb_subtree_last; - } shared; -/* * A file's MAP_PRIVATE vma can be in both i_mmap tree and anon_vma * list, after a COW of one of the file pages. A MAP_SHARED vma @@ -762,14 +752,6 @@ struct vm_area_struct {struct file * vm_file;/* File we map to (can be NULL). */ void * vm_private_data;/* was vm_pte (shared mem) */ -#ifdef CONFIG_ANON_VMA_NAME -/* -* For private and shared anonymous mappings, a pointer to a null -* terminated string containing the name given to the vma, or NULL if -* unnamed. Serialized by mmap_lock. Use anon_vma_name to access. -*/ -struct anon_vma_name *anon_name; -#endif #ifdef CONFIG_SWAP atomic_long_t swap_readahead_info;#endif @@ -782,11 +764,28 @@ struct vm_area_struct {#ifdef CONFIG_NUMA_BALANCING struct vma_numab_state *numab_state;/* NUMA Balancing state */ #endif -struct vm_userfaultfd_ctx vm_userfaultfd_ctx;#ifdef CONFIG_PER_VMA_LOCK /* Unstable RCU readers are allowed to read this. */ struct vma_lock vm_lock____cacheline_aligned_in_smp ;#endif +/* +* For areas with an address space and backing store, +* linkage into the address_space->i_mmap interval tree. +* +*/ +struct { +struct rb_node rb; +unsigned long rb_subtree_last; + } shared; +#ifdef CONFIG_ANON_VMA_NAME +/* +* For private and shared anonymous mappings, a pointer to a null +* terminated string containing the name given to the vma, or NULL if +* unnamed. Serialized by mmap_lock. Use anon_vma_name to access. +*/ +struct anon_vma_name *anon_name; +#endif +struct vm_userfaultfd_ctx vm_userfaultfd_ctx; } __randomize_layout;#ifdef CONFIG_NUMA
Suren Baghdasaryan
maintainerQuoted 83 lines · Suren Baghdasaryan
Back when per-vma locks were introduces,
vm_lockwas moved out ofvm_area_structin [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
This patchset movesvm_lockback intovm_area_struct, aligning it at the cacheline boundary and changing the cache to be cache-aligned as well. This causes VMA memory consumption to grow from 160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock... 40 102 1 : ...
vm_area_struct... 160 51 2 : ...slabinfo after moving
vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 256 32 2 : ...Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages, which is 5.5MB per 100000 VMAs.
To minimize memory overhead,vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:struct
vm_area_struct{
union {
struct {
long unsigned intvm_start; /* 0 8 */
long unsigned intvm_end; /* 8 8 */
}; /* 0 16 */
structcallback_headvm_rcu; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
structmm_struct*vm_mm; /* 16 8 */
pgprot_tvm_page_prot; /* 24 8 */
union {
constvm_flags_tvm_flags; /* 32 8 */
vm_flags_t__vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 *//* XXX 3 bytes hole, try to pack */
unsigned int
vm_lock_seq; /* 44 4 */
structlist_headanon_vma_chain; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
structanon_vma*anon_vma; /* 64 8 */
const structvm_operations_struct*vm_ops; /* 72 8 */
long unsigned intvm_pgoff; /* 80 8 */
struct file *vm_file; /* 88 8 */
void *vm_private_data; /* 96 8 */
atomic_long_tswap_readahead_info; /* 104 8 */
struct mempolicy *vm_policy; /* 112 8 *//* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
structvma_lockvm_lock(__aligned__(64)); /* 128 4 *//* XXX 4 bytes hole, try to pack */
struct {
structrb_noderb (__aligned__(8)); /* 136 24 */
long unsigned intrb_subtree_last; /* 160 8 */
} __attribute__((__aligned__(8))) shared; /* 136 32 */
structvm_userfaultfd_ctxvm_userfaultfd_ctx; /* 168 0 *//* size: 192, cachelines: 3, members: 17 */
/* sum members: 153, holes: 3, sum holes: 15 */
/* padding: 24 */
/* forced alignments: 3, forced holes: 2, sum forced holes: 12 */
} __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages, saving 2 pages compared to the 50 pages in the baseline:
slabinfo after
vm_area_structchanges:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 192 42 2 : ...
Quoted 7 lines
Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/
And of course I forgot to update Lorenzo's new locking documentation :/ Will add that in the next version.
Quoted 20 lines
Suren Baghdasaryan (4):
mm: introduce vma_start_read_locked{_nested} helpers
mm: move per-vma lock intovm_area_struct
mm: replacerw_semaphorewithatomic_tinvma_lock
mm: move lesser usedvma_area_structmembers into the last cachelineinclude/linux/mm.h | 163 +++++++++++++++++++++++++++++++++++--- include/linux/mm_types.h | 59 +++++++++----- include/linux/mmap_lock.h | 3 + kernel/fork.c | 50 ++---------- mm/init-mm.c | 2 + mm/userfaultfd.c | 14 ++-- 6 files changed, 205 insertions(+), 86 deletions(-)base-commit:
931086f2a88086319afb57cd3925607e8cda0a9f--
2.47.0.277.g8800431eea-goog
Quoted 22 lines · Suren Baghdasaryan
Quoted 21 lines · Suren Baghdasaryan
Back when per-vma locks were introduces,
vm_lockwas moved out ofvm_area_structin [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
This patchset movesvm_lockback intovm_area_struct, aligning it at the cacheline boundary and changing the cache to be cache-aligned as well. This causes VMA memory consumption to grow from 160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock... 40 102 1 : ...
vm_area_struct... 160 51 2 : ...slabinfo after moving
vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 256 32 2 : ...
Quoted 6 lines
Quoted 6 lines
Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages, which is 5.5MB per 100000 VMAs.
To minimize memory overhead,vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:
Wait a second, this is taking 40B down to 8B, but the alignment of the vma will surely absorb that 32B difference? The struct sum is 153B according to what you have below so we won't go over 192B. What am I missing?
Quoted 87 lines
Quoted 56 lines
struct
vm_area_struct{
union {
struct {
long unsigned intvm_start; /* 0 8 */
long unsigned intvm_end; /* 8 8 */
}; /* 0 16 */
structcallback_headvm_rcu; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
structmm_struct*vm_mm; /* 16 8 */
pgprot_tvm_page_prot; /* 24 8 */
union {
constvm_flags_tvm_flags; /* 32 8 */
vm_flags_t__vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 *//* XXX 3 bytes hole, try to pack */
unsigned int
vm_lock_seq; /* 44 4 */
structlist_headanon_vma_chain; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
structanon_vma*anon_vma; /* 64 8 */
const structvm_operations_struct*vm_ops; /* 72 8 */
long unsigned intvm_pgoff; /* 80 8 */
struct file *vm_file; /* 88 8 */
void *vm_private_data; /* 96 8 */
atomic_long_tswap_readahead_info; /* 104 8 */
struct mempolicy *vm_policy; /* 112 8 *//* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
structvma_lockvm_lock(__aligned__(64)); /* 128 4 *//* XXX 4 bytes hole, try to pack */
struct {
structrb_noderb (__aligned__(8)); /* 136 24 */
long unsigned intrb_subtree_last; /* 160 8 */
} __attribute__((__aligned__(8))) shared; /* 136 32 */
structvm_userfaultfd_ctxvm_userfaultfd_ctx; /* 168 0 *//* size: 192, cachelines: 3, members: 17 */
/* sum members: 153, holes: 3, sum holes: 15 */
/* padding: 24 */
/* forced alignments: 3, forced holes: 2, sum forced holes: 12 */
} __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages, saving 2 pages compared to the 50 pages in the baseline:
slabinfo after
vm_area_structchanges:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 192 42 2 : ...Quoted 7 lines
Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/And of course I forgot to update Lorenzo's new locking documentation :/ Will add that in the next version.
Quoted 20 lines
Suren Baghdasaryan (4):
mm: introduce vma_start_read_locked{_nested} helpers
mm: move per-vma lock intovm_area_struct
mm: replacerw_semaphorewithatomic_tinvma_lock
mm: move lesser usedvma_area_structmembers into the last cachelineinclude/linux/mm.h | 163 +++++++++++++++++++++++++++++++++++--- include/linux/mm_types.h | 59 +++++++++----- include/linux/mmap_lock.h | 3 + kernel/fork.c | 50 ++---------- mm/init-mm.c | 2 + mm/userfaultfd.c | 14 ++-- 6 files changed, 205 insertions(+), 86 deletions(-)base-commit:
931086f2a88086319afb57cd3925607e8cda0a9f--
2.47.0.277.g8800431eea-goog
Suren Baghdasaryan
maintainerQuoted 31 lines · Liam R. Howlett' via kernel-team
Quoted 22 lines · Suren Baghdasaryan
Quoted 21 lines · Suren Baghdasaryan
Back when per-vma locks were introduces,
vm_lockwas moved out ofvm_area_structin [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
This patchset movesvm_lockback intovm_area_struct, aligning it at the cacheline boundary and changing the cache to be cache-aligned as well. This causes VMA memory consumption to grow from 160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock... 40 102 1 : ...
vm_area_struct... 160 51 2 : ...slabinfo after moving
vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 256 32 2 : ...Quoted 6 lines
Quoted 6 lines
Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages, which is 5.5MB per 100000 VMAs.
To minimize memory overhead,vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:
Quoted 4 lines
Wait a second, this is taking 40B down to 8B, but the alignment of the vma will surely absorb that 32B difference? The struct sum is 153B according to what you have below so we won't go over 192B. What am I missing?
Take a look at the last patch in the series called "[PATCH 4/4] mm:
move lesser used vma_area_struct members into the last cacheline". I move some struct members from the earlier cachelines into cacheline #4 where the vm_lock is staying.
Quoted 91 lines
Quoted 61 lines
Quoted 61 lines
struct
vm_area_struct{
union {
struct {
long unsigned intvm_start; /* 0 8 */
long unsigned intvm_end; /* 8 8 */
}; /* 0 16 */
structcallback_headvm_rcu; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
structmm_struct*vm_mm; /* 16 8 */
pgprot_tvm_page_prot; /* 24 8 */
union {
constvm_flags_tvm_flags; /* 32 8 */
vm_flags_t__vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 *//* XXX 3 bytes hole, try to pack */
unsigned int
vm_lock_seq; /* 44 4 */
structlist_headanon_vma_chain; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
structanon_vma*anon_vma; /* 64 8 */
const structvm_operations_struct*vm_ops; /* 72 8 */
long unsigned intvm_pgoff; /* 80 8 */
struct file *vm_file; /* 88 8 */
void *vm_private_data; /* 96 8 */
atomic_long_tswap_readahead_info; /* 104 8 */
struct mempolicy *vm_policy; /* 112 8 *//* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
structvma_lockvm_lock(__aligned__(64)); /* 128 4 *//* XXX 4 bytes hole, try to pack */
struct {
structrb_noderb (__aligned__(8)); /* 136 24 */
long unsigned intrb_subtree_last; /* 160 8 */
} __attribute__((__aligned__(8))) shared; /* 136 32 */
structvm_userfaultfd_ctxvm_userfaultfd_ctx; /* 168 0 *//* size: 192, cachelines: 3, members: 17 */
/* sum members: 153, holes: 3, sum holes: 15 */
/* padding: 24 */
/* forced alignments: 3, forced holes: 2, sum forced holes: 12 */
} __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages, saving 2 pages compared to the 50 pages in the baseline:
slabinfo after
vm_area_structchanges:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 192 42 2 : ...Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
Quoted 27 lines
Quoted 3 lines
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/And of course I forgot to update Lorenzo's new locking documentation :/ Will add that in the next version.
Quoted 20 lines
Suren Baghdasaryan (4):
mm: introduce vma_start_read_locked{_nested} helpers
mm: move per-vma lock intovm_area_struct
mm: replacerw_semaphorewithatomic_tinvma_lock
mm: move lesser usedvma_area_structmembers into the last cachelineinclude/linux/mm.h | 163 +++++++++++++++++++++++++++++++++++--- include/linux/mm_types.h | 59 +++++++++----- include/linux/mmap_lock.h | 3 + kernel/fork.c | 50 ++---------- mm/init-mm.c | 2 + mm/userfaultfd.c | 14 ++-- 6 files changed, 205 insertions(+), 86 deletions(-)base-commit:
931086f2a88086319afb57cd3925607e8cda0a9f--
2.47.0.277.g8800431eea-googTo unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
Quoted 4 lines · Suren Baghdasaryan
To minimize memory overhead,
vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:
I am not a fan of building a custom lock, replacing a standard one. How much do we really care about this? rwsems are quite optimized and are known to heavily affect mm performance altogether.
...
Quoted 3 lines
Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
pft is a very micro benchmark, these results do not justify this change, imo.
Thanks,
Davidlohr
Suren Baghdasaryan
maintainerQuoted 9 lines · Davidlohr Bueso
Quoted 4 lines · Suren Baghdasaryan
To minimize memory overhead,
vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:I am not a fan of building a custom lock, replacing a standard one.
Understandable.
Quoted 1 line
How much do we really care about this?
In the Android world I got complaints after introducing per-vma locks. More specifically, moving from 5.15 to 6.1 kernel, where we first started using these locks, the memory usage increased by 10MB on average. Not a huge deal but if we can trim it without too much complexity, that would be definitely appreciated.
Quoted 1 line
rwsems are quite optimized and are known to heavily affect mm performance altogether.
I know, that's why I spent an additional week profiling the new implementation. I asked Oliver (CC'ed) to rerun the tests he used in
https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/ to confirm no regressions.
Quoted 8 lines
...
Quoted 3 lines
Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
pft is a very micro benchmark, these results do not justify this change, imo.
I'm not really trying to claim performance gains here. I just want to make sure there are no regressions.
Thanks,
Suren.
Quoted 3 lines
Thanks,
Davidlohr
Quoted 2 lines · Suren Baghdasaryan
I'm not really trying to claim performance gains here. I just want to make sure there are no regressions.
You might also fine tune the atomics with acquire/release standard locking semantics, you will probably see better numbers in Android than what you currently have in patch 3 with full barriers - and not particularly risky as callers expect that behaviour already.
Thanks,
Davidlohr
Suren Baghdasaryan
maintainerQuoted 10 lines · Davidlohr Bueso
Quoted 2 lines · Suren Baghdasaryan
I'm not really trying to claim performance gains here. I just want to make sure there are no regressions.
You might also fine tune the atomics with acquire/release standard locking semantics, you will probably see better numbers in Android than what you currently have in patch 3 with full barriers - and not particularly risky as callers expect that behaviour already.
Ack. Will try that. Thanks!
Quoted 3 lines
Thanks,
Davidlohr
Andrew Morton
maintainerQuoted 4 lines · On Mon, 11 Nov 2024 15:19:22 -0800 Suren Baghdasaryan <[email protected]> wrote:
Quoted 3 lines · Davidlohr Bueso
On Mon, 11 Nov 2024, Suren Baghdasaryan wrote:
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
To minimize memory overhead,
vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:I am not a fan of building a custom lock, replacing a standard one.
Understandable.
If we're going to invent a new lock type, I'm thinking we should do that - make it a standaline thing, add full lockdep support, etc.
I wonder if we could remove the lock from the vma altogeher and use an old-fashioned hashed lock. An array of locks indexed by the vma address. It might work well enough, although sizing the array would be difficult.
Suren Baghdasaryan
maintainerQuoted 12 lines · Andrew Morton
Quoted 9 lines · On Mon, 11 Nov 2024 15:19:22 -0800 Suren Baghdasaryan <[email protected]> wrote:
Quoted 8 lines · Davidlohr Bueso
Quoted 4 lines · Suren Baghdasaryan
To minimize memory overhead,
vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I am not a fan of building a custom lock, replacing a standard one.
Understandable.
If we're going to invent a new lock type, I'm thinking we should do that - make it a standaline thing, add full lockdep support, etc.
Yeah, that will make it easy to experiment and replace it with a different lock type if needed.
Quoted 5 lines
I wonder if we could remove the lock from the vma altogeher and use an old-fashioned hashed lock. An array of locks indexed by the vma address. It might work well enough, although sizing the array would be difficult.
Ok, sounds like I'll need to experiment a bit with different lock implementations.
I'll post a new version without the last two patches, keeping rw_semaphore for now.
Thanks!
Quoted 1 line
Quoted 61 lines · Suren Baghdasaryan
Back when per-vma locks were introduces,
vm_lockwas moved out ofvm_area_structin [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
This patchset movesvm_lockback intovm_area_struct, aligning it at the cacheline boundary and changing the cache to be cache-aligned as well. This causes VMA memory consumption to grow from 160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock... 40 102 1 : ...
vm_area_struct... 160 51 2 : ...slabinfo after moving
vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 256 32 2 : ...Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages, which is 5.5MB per 100000 VMAs.
To minimize memory overhead,vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:struct
vm_area_struct{
union {
struct {
long unsigned intvm_start; /* 0 8 */
long unsigned intvm_end; /* 8 8 */
}; /* 0 16 */
structcallback_headvm_rcu; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
structmm_struct*vm_mm; /* 16 8 */
pgprot_tvm_page_prot; /* 24 8 */
union {
constvm_flags_tvm_flags; /* 32 8 */
vm_flags_t__vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 *//* XXX 3 bytes hole, try to pack */
unsigned int
vm_lock_seq; /* 44 4 */
structlist_headanon_vma_chain; /* 48 16 */ 40 + 16
/* --- cacheline 1 boundary (64 bytes) --- */
structanon_vma*anon_vma; /* 64 8 */ 56 + 8
const structvm_operations_struct*vm_ops; /* 72 8 */
long unsigned intvm_pgoff; /* 80 8 */
struct file *vm_file; /* 88 8 */
void *vm_private_data; /* 96 8 */
atomic_long_tswap_readahead_info; /* 104 8 */
struct mempolicy *vm_policy; /* 112 8 *//* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
structvma_lockvm_lock(__aligned__(64)); /* 128 4 */
Quoted 7 lines
/* XXX 4 bytes hole, try to pack */
struct {
structrb_noderb (__aligned__(8)); /* 136 24 */
long unsigned intrb_subtree_last; /* 160 8 */
} __attribute__((__aligned__(8))) shared; /* 136 32 */
structvm_userfaultfd_ctxvm_userfaultfd_ctx; /* 168 0 */
This is 8 bytes on my compile, I guess you have userfaultfd disabled?
Considering this will end up being 256 anyways these changes may not matter, but we can pack this better.
1. move vm_lock to after anon_vma (ends up at 64B in the end)
2. move vm_lock_seq to after vm_lock
4. move struct to the new 112 offset (which is 8B aligned at 112)
3. move detached to the end of the structure
This should limit the holes and maintain the alignments.
The down side is detached is now in the last used cache line and away from what would probably be used with it, but maybe it doesn't matter considering prefetch.
But maybe you have other reasons for the placement?
Quoted 41 lines
/* size: 192, cachelines: 3, members: 17 */ /* sum members: 153, holes: 3, sum holes: 15 */ /* padding: 24 */ /* forced alignments: 3, forced holes: 2, sum forced holes: 12 */ } __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages, saving 2 pages compared to the 50 pages in the baseline:
slabinfo after
vm_area_structchanges:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 192 42 2 : ...Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/Suren Baghdasaryan (4):
mm: introduce vma_start_read_locked{_nested} helpers
mm: move per-vma lock intovm_area_struct
mm: replacerw_semaphorewithatomic_tinvma_lock
mm: move lesser usedvma_area_structmembers into the last cachelineinclude/linux/mm.h | 163 +++++++++++++++++++++++++++++++++++--- include/linux/mm_types.h | 59 +++++++++----- include/linux/mmap_lock.h | 3 + kernel/fork.c | 50 ++---------- mm/init-mm.c | 2 + mm/userfaultfd.c | 14 ++-- 6 files changed, 205 insertions(+), 86 deletions(-)base-commit:
931086f2a88086319afb57cd3925607e8cda0a9fSignature · 1 line
2.47.0.277.g8800431eea-goog
Suren Baghdasaryan
maintainerQuoted 65 lines · Liam R. Howlett
Quoted 63 lines · Suren Baghdasaryan
Back when per-vma locks were introduces,
vm_lockwas moved out ofvm_area_structin [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
This patchset movesvm_lockback intovm_area_struct, aligning it at the cacheline boundary and changing the cache to be cache-aligned as well. This causes VMA memory consumption to grow from 160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock... 40 102 1 : ...
vm_area_struct... 160 51 2 : ...slabinfo after moving
vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 256 32 2 : ...Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages, which is 5.5MB per 100000 VMAs.
To minimize memory overhead,vm_lockimplementation is changed from usingrw_semaphore(40 bytes) to an atomic (8 bytes) and severalvm_area_structmembers are moved into the last cacheline, resulting in a less fragmented structure:struct
vm_area_struct{
union {
struct {
long unsigned intvm_start; /* 0 8 */
long unsigned intvm_end; /* 8 8 */
}; /* 0 16 */
structcallback_headvm_rcu; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 16 */
structmm_struct*vm_mm; /* 16 8 */
pgprot_tvm_page_prot; /* 24 8 */
union {
constvm_flags_tvm_flags; /* 32 8 */
vm_flags_t__vm_flags; /* 32 8 */
}; /* 32 8 */
bool detached; /* 40 1 *//* XXX 3 bytes hole, try to pack */
unsigned int
vm_lock_seq; /* 44 4 */
structlist_headanon_vma_chain; /* 48 16 */ 40 + 16
/* --- cacheline 1 boundary (64 bytes) --- */
structanon_vma*anon_vma; /* 64 8 */ 56 + 8
const structvm_operations_struct*vm_ops; /* 72 8 */
long unsigned intvm_pgoff; /* 80 8 */
struct file *vm_file; /* 88 8 */
void *vm_private_data; /* 96 8 */
atomic_long_tswap_readahead_info; /* 104 8 */
struct mempolicy *vm_policy; /* 112 8 *//* XXX 8 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
structvma_lockvm_lock(__aligned__(64)); /* 128 4 *//* XXX 4 bytes hole, try to pack */
Quoted 7 lines
Quoted 5 lines
struct { struct rb_node rb (__aligned__(8)); /* 136 24 */ long unsigned int rb_subtree_last; /* 160 8 */ } __attribute__((__aligned__(8))) shared; /* 136 32 */ struct vm_userfaultfd_ctx vm_userfaultfd_ctx; /* 168 0 */This is 8 bytes on my compile, I guess you have userfaultfd disabled?
Yeah, I show here results with the defconfig. After I move things around at the end we will have space for to keep everything under 3 cachelines.
Quoted 5 lines
Considering this will end up being 256 anyways these changes may not matter, but we can pack this better.
1. movevm_lockto afteranon_vma(ends up at 64B in the end)
2. movevm_lock_seqto aftervm_lock
Nope, for performance reasons it's important to keep vm_lock_seq in the first cacheline. It's used very extensively when read-locking the VMA.
Quoted 2 lines
4. move struct to the new 112 offset (which is 8B aligned at 112)
3. move detached to the end of the structure
detached also should stay in the first cacheline, otherwise we will get performance regression. I spent a week experimenting with what we can and can't move :)
Quoted 6 lines
This should limit the holes and maintain the alignments.
The down side is detached is now in the last used cache line and away from what would probably be used with it, but maybe it doesn't matter considering prefetch.
It very much does matter :)
Quoted 44 lines
But maybe you have other reasons for the placement?
Quoted 41 lines
/* size: 192, cachelines: 3, members: 17 */ /* sum members: 153, holes: 3, sum holes: 15 */ /* padding: 24 */ /* forced alignments: 3, forced holes: 2, sum forced holes: 12 */ } __attribute__((__aligned__(64)));Memory consumption per 1000 VMAs becomes 48 pages, saving 2 pages compared to the 50 pages in the baseline:
slabinfo after
vm_area_structchanges:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct... 192 42 2 : ...Performance measurements using pft test on x86 do not show considerable difference, on Pixel 6 running Android it results in 3-5% improvement in faults per second.
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/Suren Baghdasaryan (4):
mm: introduce vma_start_read_locked{_nested} helpers
mm: move per-vma lock intovm_area_struct
mm: replacerw_semaphorewithatomic_tinvma_lock
mm: move lesser usedvma_area_structmembers into the last cachelineinclude/linux/mm.h | 163 +++++++++++++++++++++++++++++++++++--- include/linux/mm_types.h | 59 +++++++++----- include/linux/mmap_lock.h | 3 + kernel/fork.c | 50 ++---------- mm/init-mm.c | 2 + mm/userfaultfd.c | 14 ++-- 6 files changed, 205 insertions(+), 86 deletions(-)base-commit:
931086f2a88086319afb57cd3925607e8cda0a9f--
2.47.0.277.g8800431eea-goog
Quoted 6 lines · Suren Baghdasaryan
Back when per-vma locks were introduces,
vm_lockwas moved out ofvm_area_structin [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
Sorry to nag + add workload, but could you also add changes to the Documentation/mm/process_addrs.rst file to reflect this as part of the series? It'd be really cool to have the change as part of your series, so when it lands we update the documentation with it.
This change fundamentally changes internals that are documented there so it makes sense to :)
Thanks!
Suren Baghdasaryan
maintainerQuoted 9 lines · Lorenzo Stoakes
Quoted 6 lines · Suren Baghdasaryan
Back when per-vma locks were introduces,
vm_lockwas moved out ofvm_area_structin [1] because of the performance regression caused by false cacheline sharing. Recent investigation [2] revealed that the regressions is limited to a rather old Broadwell microarchitecture and even there it can be mitigated by disabling adjacent cacheline prefetching, see [3].
Quoted 7 lines
Sorry to nag + add workload, but could you also add changes to the
Documentation/mm/process_addrs.rstfile to reflect this as part of the series? It'd be really cool to have the change as part of your series, so when it lands we update the documentation with it.This change fundamentally changes internals that are documented there so it makes sense to :)
Yep, I already prepared the documentation patch to be included in v2. Sorry for missing it the first time around and thanks for the reminder.
Quoted 2 lines
Thanks!