introduce IPsec Service in virtio-crypto
v2 cover introduce IPsec Service in virtio-crypto
This series enhances virtio-crypto by adding support for IPsec services. These patches aim to extend the capabilities of virtio-crypto, enabling it to handle IPsec operations efficiently. In addition to standard crypto processing, the IPsec protocol processing is also offloaded to the Crypto device as lookaside operation.
It utilizes new virtio basic facilities, including capability and resource objects. Below is a summary of the changes introduced:
Patch1:
This patch introduces the foundational support for IPsec services within the virtio-crypto framework, outlining the necessary capabilities for IPsec operations.
Patch2:
This patch adds resource objects required for programming IPsec Security Associations (SAs) for both encryption and decryption processes.
Patch3:
This patch includes new opcodes specific to IPsec operations, facilitating the handling of IPsec data requests within the virtio-crypto driver.
Patch4:
This patch specifies the requirements for both the device and the driver to support IPsec operations.
These enhancements are for providing support for IPsec within the virtio-crypto device/driver, improving security and performance for virtualized environments. We believe these additions will significantly benefit users who rely on virtio-crypto for secure data transmission.
v2:
- Addressed the review comments from Matias.
Srujana Challa (4):
virtio-crypto: Add IPsec service operation and Capabilities
virtio-crypto: Add resource objects for IPsec outbound and inbound SAs
virtio-crypto: Add new IPsec opcodes to data request
virtio-crypto: Add device and driver requirements for IPsec operation
device-types/crypto/description.tex | 473 ++++++++++++++++++++- device-types/crypto/device-conformance.tex | 1 + device-types/crypto/driver-conformance.tex | 1 + 3 files changed, 470 insertions(+), 5 deletions(-)
Signature · 1 line
2.25.1
RFC PATCH v2 1/4 virtio-crypto: Add IPsec service operation and Capabilities
This commit introduces the IPsec service operation to the Crypto device, enabling offloading of IPsec processing.
Capabilities:
1. IPsec Resource Capability (VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP):
Indicates the device's IPsec resource limits, such as the number of outbound and inbound Security Associations (SAs).
2. IPsec SA Capability (VIRTIO_CRYPTO_IPSEC_SA_CAP): Specifies the supported IPsec modes, along with the supported cryptographic algorithms, authentication algorithms, IPsec options and anti-replay window size.
--- device-types/crypto/description.tex | 160 +++++++++++++++++++++++++++- 1 file changed, 155 insertions(+), 5 deletions(-)
device-types/crypto/description.tex +155 -5
@@ -2,11 +2,11 @@ \section{Crypto Device}\label{sec:Device Types / Crypto Device} The virtio crypto device is a virtual cryptography device as well as a virtual cryptographic accelerator. The virtio crypto device provides the -following crypto services: CIPHER, MAC, HASH, AEAD and AKCIPHER. Virtio crypto -devices have a single control queue and at least one data queue. Crypto -operation requests are placed into a data queue, and serviced by the -device. Some crypto operation requests are only valid in the context of a -session. The role of the control queue is facilitating control operation +following crypto services: CIPHER, MAC, HASH, AEAD, AKCIPHER and IPSEC. +Virtio crypto devices have a single control queue and at least one data +queue. Crypto operation requests are placed into a data queue, and serviced +by the device. Some crypto operation requests are only valid in the context +of a session. The role of the control queue is facilitating control operation requests. Sessions management is realized with control operation requests.
@@ -72,6 +72,8 @@ \subsection{Supported crypto services}\label{sec:Device Types / Crypto Device / #define VIRTIO_CRYPTO_SERVICE_AEAD 3 /* AKCIPHER (Asymmetric Key Cipher) service */ #define VIRTIO_CRYPTO_SERVICE_AKCIPHER 4 +/* IPSEC service */ +#define VIRTIO_CRYPTO_SERVICE_IPSEC 5 \end{lstlisting} The above constants designate bits used to indicate the which of crypto services are
@@ -318,6 +320,20 @@ \subsection{Device Initialization}\label{sec:Device Types / Crypto Device / Devi \item The driver MUST read the supported algorithms based on \field{crypto_services} field. \end{itemize*} +\subsection{Device and driver capabilities}\label{sec:Device Types / Crypto Device / Device and driver capabilities} + +The crypto device has the following capabilities. + +\begin{tabularx}{\textwidth}{ |l||l|X| } +\hline +Identifier & Name & Description \\ +\hline \hline +0x0800 & \hyperref[par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-RESOURCE-CAP]{VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP} & IPsec resource capability \\ +\hline +0x0801 & \hyperref[par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP]{VIRTIO_CRYPTO_IPSEC_SA_CAP} & IPsec Security Association(SA) capability \\ +\hline +\end{tabularx} + \subsection{Device Operation}\label{sec:Device Types / Crypto Device / Device Operation} The operation of a virtio crypto device is driven by requests placed on the virtqueues.
@@ -1872,3 +1888,137 @@ \subsubsection{AKCIPHER Service Operation}\label{sec:Device Types / Crypto Devic \item VIRTIO_CRYPTO_ERR if any failure not mentioned above occurs. \end{itemize*} \end{itemize*} + +\subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / Device Operation / IPSEC Service Operation} + +A crypto device can support the programming of IPsec Security Associations(SAs). +In addition to standard crypto processing, the IPsec protocol processing is +also offloaded to the Crypto Device as lookaside operation. + +IPsec Inbound processing: The device will perform decryption, authentication, +integrity checking and remove additional headers, including tunnel headers if +in tunnel mode, as well as the ESP/AH header from the packet. The resulting +packet contains only the plain data. + +IPsec Outbound processing: The device will perform encryption, attach ICV, +update/add IP headers, add ESP/AH headers/trailers. + +A crypto device can support number of IPsec SAs, allowing it to manage multiple secure +connections simultaneously. + +The device and the driver indicate IPsec SA resource limits using the +VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP capability specifying the limits on the number of +IPsec outbound and inbound SA resource objects. +The VIRTIO_CRYPTO_IPSEC_SA_CAP capability specifies which IPsec protocol capabilities +the device supports. The driver indicates the IPsec parameters by setting the IPsec +SA capability prior to adding any resource objects. + +The driver controls the IPsec SA resource objects using administration commands described in +\ref{sec:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Device resource objects}. + +\paragraph{Device and driver capabilities} +\label{par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities} + +\subparagraph{VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP} +\label{par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-RESOURCE-CAP} + +The VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP capability indicates the IPsec SA resource limits. +\field{cap_specific_data} is in the format +\field{struct virtio_crypto_ipsec_resource_cap}. + +\begin{lstlisting} +struct virtio_crypto_ipsec_resource_cap { + le32 inb_sa_limit; + le32 outb_sa_limit; +}; +\end{lstlisting} + +\field{inb_sa_limit}, and \field{outb_sa_limit} denote the maximum number of IPsec +security Associations (SAs) that can be utilized for IPsec inbound and outbound processing, +respectively, which the device is capable of creating. + +\subparagraph{VIRTIO_CRYPTO_IPSEC_SA_CAP} +\label{par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP} + +The VIRTIO_CRYPTO_IPSEC_SA_CAP capability lists the supported IPsec modes along with +the supported cryptographic, authentication algorithms and anti-replay window size for +each IPsec mode. +\field{cap_specific_data} is in the format \field{struct virtio_crypto_ipsec_sa_cap_data}. + +\begin{lstlisting}[label={lst:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / virtio-crypto-ipsec-mode-cap}] +struct virtio_crypto_ipsec_mode_cap { + le32 replay_win_sz_max; + le32 options; + le64 cipher_algo; + le64 hmac_algo; + le32 aead_algo; + le32 max_cipher_key_len; + le32 max_auth_key_len; + u8 mode; + u8 padding[3]; +}; + +struct virtio_crypto_ipsec_sa_cap_data { + u8 count; + u8 reserved[7]; + struct virtio_crypto_ipsec_mode_cap mode[]; +}; +\end{lstlisting} + +\field{count} indicates number of valid entries in the \field{mode} array. +\field{mode[]} is an array of supported IPsec modes. Within each array entry: + +\field{mode} specifies the IPsec mode, as defined in table +\ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes}. +\field{replay_win_sz_max} specifies the maximum anti-replay window size the device supports. + +\field{options} Each bit indicates the IPsec protocol options supported by the device, as defined in table +\ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options}. + +\field{cipher_algo} CIPHER algorithms mask, see \ref{sec:Device Types / Crypto Device / Supported crypto services / CIPHER services}. + +\field{hmac_algo} HMAC algorithms mask, see \ref{sec:Device Types / Crypto Device / Supported crypto services / MAC services}. + +\field{aead_algo} AEAD algorithms mask, see \ref{sec:Device Types / Crypto Device / Supported crypto services / AEAD services}. + +\field{max_cipher_key_len} is the maximum length of cipher key supported by the device. + +\field{max_auth_key_len} is the maximum length of authenticated key supported by the device. + +\begin{table}[H] +\caption{IPsec Modes} +\label{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes} +\begin{tabularx}{\textwidth}{ |l|X|X| } +\hline +Type & Name & Description \\ +\hline \hline +0x0 & - & Reserved \\ +\hline +0x1 & VIRTIO_CRYPTO_IPSEC_MODE_ESP_TUNNEL & IPsec ESP protocol in tunnel mode \\ +\hline +0x2 & VIRTIO_CRYPTO_IPSEC_MODE_ESP_TRANSPORT & IPsec ESP protocol in transport mode \\ +\hline +0x3 & VIRTIO_CRYPTO_IPSEC_MODE_AH_TUNNEL & IPsec AH protocol in tunnel mode \\ +\hline +0x4 & VIRTIO_CRYPTO_IPSEC_MODE_AH_TRANSPORT & IPsec AH protocol in transport mode \\ +\hline +\end{tabularx} +\end{table} + +\begin{table}[H] +\caption{IPsec Options} +\label{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options} +\begin{tabularx}{\textwidth}{ |l|X|X| } +\hline +Bit Number & Name & Description \\ +\hline \hline +0 & VIRTIO_CRYPTO_IPSEC_ESN & Specifies whether extended sequence number is supported \\ +\hline +1 & VIRTIO_CRYPTO_IPSEC_UDP_ENCAP & Specifies whether udp encapsulation is supported \\ +\hline +2 & VIRTIO_CRYPTO_IPSEC_COPY_DSCP & Specifies whether copy dscp is supported \\ +\hline +3 & VIRTIO_CRYPTO_IPSEC_DEC_TTL & Specifies whether decrementing the time to live is supported \\ +\hline +\end{tabularx} +\end{table}
Signature · 1 line
2.25.1
RE: [PATCH RFC v2 1/4] virtio-crypto: Add IPsec service operation and Capabilities
Quoted 39 lines
From: Srujana Challa <[email protected]>
Sent: Monday, December 16, 2024 3:51 PMThis commit introduces the IPsec service operation to the Crypto device, enabling offloading of IPsec processing.
Capabilities:
1. IPsec Resource Capability (
VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP):
Indicates the device's IPsec resource limits, such as the number of outbound and inbound Security Associations (SAs).
2. IPsec SA Capability (VIRTIO_CRYPTO_IPSEC_SA_CAP): Specifies the supported IPsec modes, along with the supported cryptographic algorithms, authentication algorithms, IPsec options and anti-replay window size.Signed-off-by Srujana Challa <[email protected]>--- device-types/crypto/description.tex | 160 +++++++++++++++++++++++++++- 1 file changed, 155 insertions(+), 5 deletions(-)device- renamed from device-types/crypto/description.tex +0
-0types/crypto/description.tex
index 5705e26..df863da 100644device-types/crypto/description.tex +0
-0@@ -2,11 +2,11 @@ \section{Crypto Device}\label{sec:Device Types / Crypto Device} The virtio crypto device is a virtual cryptography device as well as a virtualcryptographic accelerator. The virtio crypto device provides the -following crypto services: CIPHER, MAC, HASH, AEAD and AKCIPHER. Virtio crypto - devices have a single control queue and at least one data queue. Crypto - operation requests are placed into a data queue, and serviced by the -device. Some crypto operation requests are only valid in the context of a -session. The role of the control queue is facilitating control operation
device-types/crypto/description.tex
Quoted 7 lines
device-types/crypto/description.tex +6
-0+following crypto services: CIPHER, MAC, HASH, AEAD, AKCIPHER and IPSEC. +Virtio crypto devices have a single control queue and at least one data +queue. Crypto operation requests are placed into a data queue, and +serviced by the device. Some crypto operation requests are only valid +in the context of a session. The role of the control queue is +facilitating control operation requests. Sessions management is realized with control operation requests.
Please mention that, the crypto device may have administration command interface through which IPsec service capabilities and resources are configured.
Quoted 47 lines
device-types/crypto/description.tex +0
-0@@ -72,6 +72,8 @@ \subsection{Supported cryptoservices}\label{sec:Device Types / Crypto Device /
#defineVIRTIO_CRYPTO_SERVICE_AEAD3
/* AKCIPHER (Asymmetric Key Cipher) service */ #defineVIRTIO_CRYPTO_SERVICE_AKCIPHER4device-types/crypto/description.tex +2
-0+/* IPSEC service */ +#define VIRTIO_CRYPTO_SERVICE_IPSEC 5 \end{lstlisting} The above constants designate bits used to indicate the which of cryptoservices are @@ -318,6 +320,20 @@ \subsection{Device Initialization}\label{sec:Device Types / Crypto Device / Devi \item The driver MUST read the supported algorithms based on \field{crypto_services} field.
\end{itemize*}+\subsection{Device and driver capabilities}\label{sec:Device Types /
device-types/crypto/description.tex +9
-0+Crypto Device / Device and driver capabilities} + +The crypto device has the following capabilities. + +\begin{tabularx}{\textwidth}{ |l||l|X| } \hline Identifier & Name & +Description \\ \hline \hline +0x0800 & \hyperref[par:Device Types / Crypto Device / Device Operation +/ IPsec Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-RESOURCE-CAP]{VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP} &
device-types/crypto/description.tex +6
-0+IPsec resource capability \\ \hline +0x0801 & \hyperref[par:Device Types / Crypto Device / Device Operation +/ IPsec Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-SA-CAP]{VIRTIO_CRYPTO_IPSEC_SA_CAP} & IPsec +Security Association(SA) capability \\ \hline \end{tabularx} + \subsection{Device Operation}\label{sec:Device Types / Crypto Device /Device Operation}
The operation of a virtio crypto device is driven by requests placed on the
virtqueues.device-types/crypto/description.tex +0
-0@@ -1872,3 +1888,137 @@ \subsubsection{AKCIPHER ServiceOperation}\label{sec:Device Types / Crypto Devic \item
VIRTIO_CRYPTO_ERRif any failure not mentioned above occurs.
\end{itemize*}
\end{itemize*}device-types/crypto/description.tex +5
-0+ +\subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto +Device / Device Operation / IPSEC Service Operation} + +A crypto device can support the programming of IPsec Security
Quoted 1 line
Associations(SAs).
Instead of programming, can we say processing of IPsec protocol processing/operations?
device-types/crypto/description.tex
Quoted 3 lines
device-types/crypto/description.tex +3
-0+In addition to standard crypto processing, the IPsec protocol +processing is also offloaded to the Crypto Device as lookaside operation. +
Lets avoid the term offloading in spec context.
device-types/crypto/description.tex
Quoted 8 lines
device-types/crypto/description.tex +8
-0+IPsec Inbound processing: The device will perform decryption, +authentication, integrity checking and remove additional headers, +including tunnel headers if in tunnel mode, as well as the ESP/AH +header from the packet. The resulting packet contains only the plain data. + +IPsec Outbound processing: The device will perform encryption, attach +ICV, update/add IP headers, add ESP/AH headers/trailers. +
Also lets avoid inbound and outbound context.
Let crypto just describe a set of operation. And give an example, such, Decryption. ... and then say,
For example and IPsec encrypted packet processing can use these operations.
Also header or headers?
device-types/crypto/description.tex
Quoted 3 lines
device-types/crypto/description.tex +3
-0+A crypto device can support number of IPsec SAs, allowing it to manage +multiple secure connections simultaneously. +
Lets add reference to IPSec SAs.
device-types/crypto/description.tex
Quoted 3 lines
device-types/crypto/description.tex +3
-0+The device and the driver indicate IPsec SA resource limits using the +VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP capability specifying the limits on +the number of IPsec outbound and inbound SA resource objects.
If possible, lets try to avoid inbound and outbound context. As long as we can say attach it to a specific resource type, possibly its ok.
Quoted 48 lines
device-types/crypto/description.tex +3
-0+The VIRTIO_CRYPTO_IPSEC_SA_CAP capability specifies which IPsec +protocol capabilities the device supports. The driver indicates the +IPsec parameters by setting the IPsec SA capability prior to adding anyresource objects.
device-types/crypto/description.tex +3
-0+ +The driver controls the IPsec SA resource objects using administration +commands described in \ref{sec:Basic Facilities of a Virtio Device / Devicegroups / Group administration commands / Device resource objects}.
device-types/crypto/description.tex +11
-0+ +\paragraph{Device and driver capabilities} \label{par:Device Types / +Crypto Device / Device Operation / IPsec Service Operation / Device and +driver capabilities} + +\subparagraph{VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-RESOURCE-CAP} + +The VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP capability indicates the IPsec SAresource limits.
+\field{cap_specific_data} is in the format \field{structdevice-types/crypto/description.tex +12
-0+virtio_crypto_ipsec_resource_cap}. + +\begin{lstlisting} +struct virtio_crypto_ipsec_resource_cap { + le32 inb_sa_limit; + le32 outb_sa_limit; +}; +\end{lstlisting} + +\field{inb_sa_limit}, and \field{outb_sa_limit} denote the maximum +number of IPsec security Associations (SAs) that can be utilized for +IPsec inbound and outbound processing, respectively, which the device iscapable of creating.
device-types/crypto/description.tex +10
-0+ +\subparagraph{VIRTIO_CRYPTO_IPSEC_SA_CAP} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-SA-CAP} + +The VIRTIO_CRYPTO_IPSEC_SA_CAP capability lists the supported IPsec +modes along with the supported cryptographic, authentication algorithms +and anti-replay window size for each IPsec mode. +\field{cap_specific_data} is in the format \field{struct
virtio_crypto_ipsec_sa_cap_data}.device-types/crypto/description.tex +3
-0+ +\begin{lstlisting}[label={lst:Device Types / Crypto Device / Device +Operation / IPsec Service Operation / Device and driver capabilities /
Quoted 3 lines
VIRTIO-CRYPTO-IPSEC-SA-CAP / virtio-crypto-ipsec-mode-cap}] struct
virtio_crypto_ipsec_mode_cap{
+ le32replay_win_sz_max;
To be consistent with below auth and cipher convention and other in the spec,
max_replay_win_size;
Quoted 18 lines
device-types/crypto/description.tex +17
-0+ le32 options; + le64 cipher_algo; + le64 hmac_algo; + le32 aead_algo; + le32 max_cipher_key_len; + le32 max_auth_key_len; + u8 mode; + u8 padding[3]; +}; + +struct virtio_crypto_ipsec_sa_cap_data { + u8 count; + u8 reserved[7]; + struct virtio_crypto_ipsec_mode_cap mode[]; }; \end{lstlisting} + +\field{count} indicates number of valid entries in the \field{mode} array. +\field{mode[]} is an array of supported IPsec modes. Within each arrayentry:
Quoted 8 lines
+
+\field{mode} specifies the IPsec mode, as defined in table +\ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes}.
+\field{replay_win_sz_max} specifies the maximum anti-replay window size the device supports.
+
If this applies to only inbound, lets add it.
Quoted 12 lines
+\field{options} Each bit indicates the IPsec protocol options supported +by the device, as defined in table \ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options}.
+
+\field{cipher_algo} CIPHER algorithms mask, see \ref{sec:Device Types / Crypto Device / Supported crypto services / CIPHER services}.
+
+\field{hmac_algo} HMAC algorithms mask, see \ref{sec:Device Types / Crypto Device / Supported crypto services / MAC services}.
+
+\field{aead_algo} AEAD algorithms mask, see \ref{sec:Device Types / Crypto
Quoted 8 lines
Device / Supported crypto services / AEAD services}.
+
+\field{max_cipher_key_len} is the maximum length of cipher key supported by the device.
+
+\field{max_auth_key_len} is the maximum length of authenticated key supported by the device.
+
s/authenticated/authentication?
If this applies to the AH processing, lets write one line for it.
Quoted 18 lines
+\begin{table}[H]
+\caption{IPsec Modes}
+\label{table:Device Types / Crypto Device / Device Operation / IPsecdevice-types/crypto/description.tex +8
-0+Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes} \begin{tabularx}{\textwidth}{ +|l|X|X| } \hline Type & Name & Description \\ \hline \hline +0x0 & - & Reserved \\ +\hline +0x1 & VIRTIO_CRYPTO_IPSEC_MODE_ESP_TUNNEL & IPsec ESP protocol in +tunnel mode \\ \hline +0x2 & VIRTIO_CRYPTO_IPSEC_MODE_ESP_TRANSPORT & IPsec ESP protocolin
+transport mode \\ \hline
+0x3 &VIRTIO_CRYPTO_IPSEC_MODE_AH_TUNNEL& IPsec AH protocol in tunnel
+mode \\ \hline
+0x4 &VIRTIO_CRYPTO_IPSEC_MODE_AH_TRANSPORT& IPsec AH protocol in
device-types/crypto/description.tex
Quoted 2 lines
device-types/crypto/description.tex +2
-0+transport mode \\ \hline \end{tabularx} \end{table} +
Yet to read full, but if not mentioned, lets add 1 or 2 lines that describes tunnel and transport mode.
Quoted 17 lines
+\begin{table}[H]
+\caption{IPsec Options}
+\label{table:Device Types / Crypto Device / Device Operation / IPsecdevice-types/crypto/description.tex +7
-0+Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options} +\begin{tabularx}{\textwidth}{ |l|X|X| } \hline Bit Number & Name & +Description \\ \hline \hline +0 & VIRTIO_CRYPTO_IPSEC_ESN & Specifies whether extended sequence +number is supported \\ \hline +1 & VIRTIO_CRYPTO_IPSEC_UDP_ENCAP & Specifies whether udpencapsulation
device-types/crypto/description.tex +5
-1+is supported \\ \hline +2 & VIRTIO_CRYPTO_IPSEC_COPY_DSCP & Specifies whether copy dscp is +supported \\ \hline +3 & VIRTIO_CRYPTO_IPSEC_DEC_TTL & Specifies whether decrementing the +time to live is supported \\ \hline \end{tabularx} \end{table} --
Quoted 1 line
2.25.1
If above each entry has some IPsec RFC reference, its ok, if not, lets add more for example, copy dscp from where to where.
RE: [PATCH RFC v2 1/4] virtio-crypto: Add IPsec service operation and Capabilities
Quoted 37 lines
Subject: [EXTERNAL] RE: [PATCH RFC v2 1/4] virtio-crypto: Add IPsec service operation and Capabilities
Quoted 30 lines
From: Srujana Challa <[email protected]>
Sent: Monday, December 16, 2024 3:51 PMThis commit introduces the IPsec service operation to the Crypto device, enabling offloading of IPsec processing.
Capabilities:
1. IPsec Resource Capability (
VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP):
Indicates the device's IPsec resource limits, such as the number of outbound and inbound Security Associations (SAs).
2. IPsec SA Capability (VIRTIO_CRYPTO_IPSEC_SA_CAP): Specifies the supported IPsec modes, along with the supported cryptographic algorithms, authentication algorithms, IPsec options and anti-replay window size.Signed-off-by Srujana Challa <[email protected]>--- device-types/crypto/description.tex | 160 +++++++++++++++++++++++++++- 1 file changed, 155 insertions(+), 5 deletions(-)device- renamed from device-types/crypto/description.tex +0
-0types/crypto/description.tex index 5705e26..df863da 100644
device-types/crypto/description.tex +0
-0@@ -2,11 +2,11 @@ \section{Crypto Device}\label{sec:Device Types / Crypto Device} The virtio crypto device is a virtual cryptography device as well asQuoted 4 lines
a virtual cryptographic accelerator. The virtio crypto device provides the -following crypto services: CIPHER, MAC, HASH, AEAD and AKCIPHER. Virtio crypto - devices have a single control queue and at least one data queue. Crypto - operation requests are placed into a data
queue, and serviced by the -device.
Quoted 13 lines
device-types/crypto/description.tex
Quoted 10 lines
Some crypto operation requests are only valid in the context of a -session. The role of the control queue is facilitating control operation
device-types/crypto/description.tex +6
-0+following crypto services: CIPHER, MAC, HASH, AEAD, AKCIPHER and IPSEC. +Virtio crypto devices have a single control queue and at least one +data queue. Crypto operation requests are placed into a data queue, +and serviced by the device. Some crypto operation requests are only +valid in the context of a session. The role of the control queue is +facilitating control operation requests. Sessions management is realized with control operation requests.Please mention that, the crypto device may have administration command interface through which IPsec service capabilities and resources are configured.
Will do.
Quoted 38 lines
Quoted 11 lines
device-types/crypto/description.tex +0
-0@@ -72,6 +72,8 @@ \subsection{Supported cryptoservices}\label{sec:Device Types / Crypto Device /
#defineVIRTIO_CRYPTO_SERVICE_AEAD3
/* AKCIPHER (Asymmetric Key Cipher) service */ #defineVIRTIO_CRYPTO_SERVICE_AKCIPHER4device-types/crypto/description.tex +2
-0+/* IPSEC service */ +#define VIRTIO_CRYPTO_SERVICE_IPSEC 5 \end{lstlisting} The above constants designate bits used to indicate the which ofQuoted 3 lines
crypto services are @@ -318,6 +320,20 @@ \subsection{Device Initialization}\label{sec:Device Types / Crypto Device / Devi \item The driver MUST read the supported algorithms based on
\field{crypto_services} field.
Quoted 23 lines
\end{itemize*}
+\subsection{Device and driver capabilities}\label{sec:Device Types /
device-types/crypto/description.tex +10
-0+Crypto Device / Device and driver capabilities} + +The crypto device has the following capabilities. + +\begin{tabularx}{\textwidth}{ |l||l|X| } \hline Identifier & Name & +Description \\ \hline \hline +0x0800 & \hyperref[par:Device Types / Crypto Device / Device +Operation / IPsec Service Operation / Device and driver capabilities +/ +VIRTIO-CRYPTO-IPSEC-RESOURCE-CAP]{VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP} &
device-types/crypto/description.tex +6
-0+IPsec resource capability \\ \hline +0x0801 & \hyperref[par:Device Types / Crypto Device / Device +Operation / IPsec Service Operation / Device and driver capabilities +/ VIRTIO-CRYPTO-IPSEC-SA-CAP]{VIRTIO_CRYPTO_IPSEC_SA_CAP} & IPsec +Security Association(SA) capability \\ \hline \end{tabularx} + \subsection{Device Operation}\label{sec:Device Types / Crypto Device/ Device Operation}
Quoted 15 lines
Quoted 12 lines
The operation of a virtio crypto device is driven by requests placed
on the virtqueues.device-types/crypto/description.tex +0
-0@@ -1872,3 +1888,137 @@ \subsubsection{AKCIPHER ServiceOperation}\label{sec:Device Types / Crypto Devic \item
VIRTIO_CRYPTO_ERRif any failure not mentioned above occurs.
\end{itemize*}
\end{itemize*}device-types/crypto/description.tex +5
-0+ +\subsubsection{IPSEC Service Operation}\label{sec:Device Types / +Crypto Device / Device Operation / IPSEC Service Operation} + +A crypto device can support the programming of IPsec SecurityQuoted 1 line
Associations(SAs).
Instead of programming, can we say processing of IPsec protocol processing/operations?
Yes, will do.
Quoted 5 lines
device-types/crypto/description.tex
Quoted 4 lines
device-types/crypto/description.tex +3
-0+In addition to standard crypto processing, the IPsec protocol +processing is also offloaded to the Crypto Device as lookaside operation. +Lets avoid the term offloading in spec context.
Will do.
Quoted 13 lines
device-types/crypto/description.tex
Quoted 9 lines
device-types/crypto/description.tex +8
-0+IPsec Inbound processing: The device will perform decryption, +authentication, integrity checking and remove additional headers, +including tunnel headers if in tunnel mode, as well as the ESP/AH +header from the packet. The resulting packet contains only the plain data. + +IPsec Outbound processing: The device will perform encryption, attach +ICV, update/add IP headers, add ESP/AH headers/trailers. +Also lets avoid inbound and outbound context.
Let crypto just describe a set of operation. And give an example, such, Decryption. ... and then say, For example and IPsec encrypted packet processing can use these operations.
Since the device handles the entire IPsec inbound and outbound operations, and the IPsec RFC uses the terms "IPsec inbound" and "IPsec outbound", can we use the same terminology here?
Quoted 2 lines
Also header or headers?
Will modify it to header.
Quoted 6 lines
device-types/crypto/description.tex
Quoted 4 lines
device-types/crypto/description.tex +3
-0+A crypto device can support number of IPsec SAs, allowing it to +manage multiple secure connections simultaneously. +Lets add reference to IPSec SAs.
I'll include it in the follow-up patch since the IPsec SA resource objects are defined there.
Quoted 64 lines
device-types/crypto/description.tex
Quoted 3 lines
device-types/crypto/description.tex +3
-0+The device and the driver indicate IPsec SA resource limits using the +VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP capability specifying the limits on +the number of IPsec outbound and inbound SA resource objects.If possible, lets try to avoid inbound and outbound context. As long as we can say attach it to a specific resource type, possibly its ok.
Quoted 53 lines
device-types/crypto/description.tex +4
-0+The VIRTIO_CRYPTO_IPSEC_SA_CAP capability specifies which IPsec +protocol capabilities the device supports. The driver indicates the +IPsec parameters by setting the IPsec SA capability prior to adding +anyresource objects.
device-types/crypto/description.tex +4
-0+ +The driver controls the IPsec SA resource objects using +administration commands described in \ref{sec:Basic Facilities of a +Virtio Device / Devicegroups / Group administration commands / Device resource objects}.
device-types/crypto/description.tex +12
-0+ +\paragraph{Device and driver capabilities} \label{par:Device Types / +Crypto Device / Device Operation / IPsec Service Operation / Device +and driver capabilities} + +\subparagraph{VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-RESOURCE-CAP} + +The VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP capability indicates the IPsec +SAresource limits.
+\field{cap_specific_data} is in the format \field{structdevice-types/crypto/description.tex +13
-0+virtio_crypto_ipsec_resource_cap}. + +\begin{lstlisting} +struct virtio_crypto_ipsec_resource_cap { + le32 inb_sa_limit; + le32 outb_sa_limit; +}; +\end{lstlisting} + +\field{inb_sa_limit}, and \field{outb_sa_limit} denote the maximum +number of IPsec security Associations (SAs) that can be utilized for +IPsec inbound and outbound processing, respectively, which the device +iscapable of creating.
device-types/crypto/description.tex +10
-0+ +\subparagraph{VIRTIO_CRYPTO_IPSEC_SA_CAP} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-SA-CAP} + +The VIRTIO_CRYPTO_IPSEC_SA_CAP capability lists the supported IPsec +modes along with the supported cryptographic, authentication +algorithms and anti-replay window size for each IPsec mode. +\field{cap_specific_data} is in the format \field{struct
virtio_crypto_ipsec_sa_cap_data}.device-types/crypto/description.tex +4
-0+ +\begin{lstlisting}[label={lst:Device Types / Crypto Device / Device +Operation / IPsec Service Operation / Device and driver capabilities +/Quoted 3 lines
VIRTIO-CRYPTO-IPSEC-SA-CAP / virtio-crypto-ipsec-mode-cap}] struct
virtio_crypto_ipsec_mode_cap{
+ le32replay_win_sz_max;To be consistent with below auth and cipher convention and other in the spec,
Quoted 1 line
max_replay_win_size;
Will do.
Quoted 24 lines
Quoted 24 lines
device-types/crypto/description.tex +19
-0+ le32 options; + le64 cipher_algo; + le64 hmac_algo; + le32 aead_algo; + le32 max_cipher_key_len; + le32 max_auth_key_len; + u8 mode; + u8 padding[3]; +}; + +struct virtio_crypto_ipsec_sa_cap_data { + u8 count; + u8 reserved[7]; + struct virtio_crypto_ipsec_mode_cap mode[]; }; +\end{lstlisting} + +\field{count} indicates number of valid entries in the \field{mode} array. +\field{mode[]} is an array of supported IPsec modes. Within each +arrayentry:
+
+\field{mode} specifies the IPsec mode, as defined in table +\ref{table:Device Types / Crypto Device / Device Operation / IPsec
Quoted 8 lines
Quoted 7 lines
+Service
Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes}. +\field{replay_win_sz_max} specifies the maximum anti-replay window +size
the device supports.
+If this applies to only inbound, lets add it.
Will do.
Quoted 19 lines
Quoted 19 lines
+\field{options} Each bit indicates the IPsec protocol options
device-types/crypto/description.tex +2
-0+supported by the device, as defined in table \ref{table:Device Types +/ Crypto Device /Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options}.
device-types/crypto/description.tex +3
-0+ +\field{cipher_algo} CIPHER algorithms mask, see \ref{sec:Device Types +/Crypto Device / Supported crypto services / CIPHER services}. +
+\field{hmac_algo} HMAC algorithms mask, see \ref{sec:Device Types / Crypto Device / Supported crypto services / MAC services}.device-types/crypto/description.tex +3
-0+ +\field{aead_algo} AEAD algorithms mask, see \ref{sec:Device Types / +CryptoDevice / Supported crypto services / AEAD services}. +
+\field{max_cipher_key_len} is the maximum length of cipher key
Quoted 8 lines
Quoted 6 lines
+supported
by the device.
+
+\field{max_auth_key_len} is the maximum length of authenticated key supported by the device.
+s/authenticated/authentication?
If this applies to the AH processing, lets write one line for it.
I believe, this applies for ESP processing also.
Quoted 14 lines
device-types/crypto/description.tex
Quoted 13 lines
+\begin{table}[H]
+\caption{IPsec Modes}
+\label{table:Device Types / Crypto Device / Device Operation / IPsecdevice-types/crypto/description.tex +9
-0+Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes} +\begin{tabularx}{\textwidth}{ +|l|X|X| } \hline Type & Name & Description \\ \hline \hline +0x0 & - & Reserved \\ +\hline +0x1 & VIRTIO_CRYPTO_IPSEC_MODE_ESP_TUNNEL & IPsec ESP protocol in +tunnel mode \\ \hline +0x2 & VIRTIO_CRYPTO_IPSEC_MODE_ESP_TRANSPORT & IPsec ESPprotocol
Quoted 11 lines
device-types/crypto/description.tex
Quoted 9 lines
in
+transport mode \\ \hline
+0x3 &VIRTIO_CRYPTO_IPSEC_MODE_AH_TUNNEL& IPsec AH protocol in tunnel
+mode \\ \hline
+0x4 &VIRTIO_CRYPTO_IPSEC_MODE_AH_TRANSPORT& IPsec AH protocol indevice-types/crypto/description.tex +2
-0+transport mode \\ \hline \end{tabularx} \end{table} +Yet to read full, but if not mentioned, lets add 1 or 2 lines that describes tunnel and transport mode.
Will do.
Quoted 13 lines
Quoted 13 lines
+\begin{table}[H]
+\caption{IPsec Options}
+\label{table:Device Types / Crypto Device / Device Operation / IPsecdevice-types/crypto/description.tex +7
-0+Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options} +\begin{tabularx}{\textwidth}{ |l|X|X| } \hline Bit Number & Name & +Description \\ \hline \hline +0 & VIRTIO_CRYPTO_IPSEC_ESN & Specifies whether extended sequence +number is supported \\ \hline +1 & VIRTIO_CRYPTO_IPSEC_UDP_ENCAP & Specifies whether udpencapsulation
+is supported \\ \hline
Quoted 9 lines
Quoted 6 lines
+2 &
VIRTIO_CRYPTO_IPSEC_COPY_DSCP& Specifies whether copy dscp isdevice-types/crypto/description.tex +3
-1+supported \\ \hline +3 & VIRTIO_CRYPTO_IPSEC_DEC_TTL & Specifies whether decrementing the +time to live is supported \\ \hline \end{tabularx} \end{table} --2.25.1
If above each entry has some IPsec RFC reference, its ok, if not, lets add more for example, copy dscp from where to where.
Thanks.
RFC PATCH v2 2/4 virtio-crypto: Add resource objects for IPsec outbound and inbound SAs
In reply to Srujana ChallaThis commit introduces resource objects to enable the driver/device to create IPsec Security Associations (SAs) for both inbound and outbound directions.
The IPsec SA objects include essential parameters required for packet outbound and inbound processing, such as SPI, tunnel headers, IPsec mode, IPsec options and cipher/authentication specific data.
--- device-types/crypto/description.tex | 134 ++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+)
device-types/crypto/description.tex +134 -0
@@ -334,6 +334,20 @@ \subsection{Device and driver capabilities}\label{sec:Device Types / Crypto Devi \hline \end{tabularx} +\subsection{Device resource objects}\label{sec:Device Types / Crypto Device / Device resource objects} + +The crypto device has the following resource objects. + +\begin{tabularx}{\textwidth}{ |l||l|X| } +\hline +type & Name & Description \\ +\hline \hline +0x0200 & \hyperref[par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA]{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA} & IPsec outbound SA resource object \\ +\hline +0x0201 & \hyperref[par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-INBOUND-SA]{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA} & IPsec inbound SA resource object \\ +\hline +\end{tabularx} + \subsection{Device Operation}\label{sec:Device Types / Crypto Device / Device Operation} The operation of a virtio crypto device is driven by requests placed on the virtqueues.
@@ -2022,3 +2036,123 @@ \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / \hline \end{tabularx} \end{table} + +\paragraph{Resource objects} +\label{par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Resource objects} + +\subparagraph{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA}\label{par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA} + +A driver can have outbound SAs between 0 and \field{outb_sa_limit}, as specified by the +capability VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the IPsec outbound SA resource object +\field{resource_obj_specific_data} is in the format +\field{struct virtio_crypto_resource_obj_ipsec_sa}. + +\begin{lstlisting} +struct virtio_crypto_ipsec_tunnel_param { + /* Tunnel type: IPv4 or IPv6 */ + u8 type; + u8 reserved[3]; + union { + /* IPv4 tunnel header parameters */ + struct { + /* IPv4 source address */ + struct in_addr src_ip; + /* IPv4 destination address */ + struct in_addr dst_ip; + /* IPv4 Differentiated Services Code Point */ + uint8_t dscp; + /* IPv4 Don't Fragment bit */ + uint8_t df; + /* IPv4 Time To Live */ + uint8_t ttl; + } ipv4; + /* IPv6 tunnel header parameters */ + struct { + /* IPv6 source address */ + struct in6_addr src_addr; + /* IPv6 destination address */ + struct in6_addr dst_addr; + /* IPv6 flow label */ + uint32_t flabel; + /* IPv6 hop limit */ + uint8_t hlimit; + /* IPv6 Differentiated Services Code Point */ + uint8_t dscp; + } ipv6; + }; +}; + +struct virtio_crypto_resource_obj_ipsec_sa { + le32 spi; + le32 salt; + le64 options; + struct virtio_crypto_ipsec_tunnel_param param; + le64 esn; + le16 udp_sport; + le16 udp_dport; + le32 replay_win_sz; + le64 cipher_algo; + struct { + u8 *data; + le16 length; + } cipher_key; + le64 auth_algo; + struct { + u8 *data; + le16 length; + } auth_key; + le32 obj_id; + u8 mode; + u8 direction; +} +\end{lstlisting} + +\field{spi} is the Security Parameter Index(SPI) used to uniquely identify the IPsec SA. +\field{salt} is the 32 bit salt value used in the cryptographic operations. + +\field{options} specifies the Options for configuring the IPsec SA, see +\ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options}. + +\field{param} specifies the parameters for IPsec tunnel mode. +\field{esn} is the starting sequence number. +\field{udp_sport} is the source port for UDP encapsulation. \field{udp_dport} is the +destination port for UDP encapsulation. +\field{replay_win_sz} is the anti-replay window size to enable sequence replay attack +handling, replay checking is disabled if the window size is 0. + +\field{cipher_algo} is the cipher algorithm identifier +see \ref{sec:Device Types / Crypto Device / Supported crypto services / CIPHER services} +\field{cipher_key} specifies the cipher key and its length. +\field{auth_algo} is the Authentication algorithm identifier +\field{auth_key} specifies the authentication key data and its length. +\field{obj_id} specifies the object id of the SA that can be used to retrieve +driver-defined data associated with the IPsec SA. + +\field{mode} specifies the mode of the IPsec SA, see +\ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes}. + +\field{direction} specifies IPsec SA direction, see +\ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA / IPsec Direction}. + +\begin{table}[H] +\caption{IPsec Direction} +\label{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA / IPsec Direction} +\begin{tabularx}{\textwidth}{ |l|X|X| } +\hline +Type & Name & Description \\ +\hline \hline +0x0 & - & Reserved \\ +\hline +0x1 & VIRTIO_CRYPTO_IPSEC_DIR_OUTBOUND & IPsec direction outbound \\ +\hline +0x2 & VIRTIO_CRYPTO_IPSEC_DIR_INBOUND & IPsec direction inbound \\ +\hline +\end{tabularx} +\end{table} + +\subparagraph{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA}\label{par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-INBOUND-SA} + +A driver can have inbound SAs between 0 and \field{inb_sa_limit}, as specified by the +capability VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the IPsec inbound SA resource object +\field{resource_obj_specific_data} is in the format +\field{struct virtio_crypto_resource_obj_ipsec_sa}.
Signature · 1 line
2.25.1
RE: [PATCH RFC v2 2/4] virtio-crypto: Add resource objects for IPsec outbound and inbound SAs
Quoted 69 lines
From: Srujana Challa <[email protected]>
Sent: Monday, December 16, 2024 3:51 PMThis commit introduces resource objects to enable the driver/device to create IPsec Security Associations (SAs) for both inbound and outbound directions.
The IPsec SA objects include essential parameters required for packet outbound and inbound processing, such as SPI, tunnel headers, IPsec mode, IPsec options and cipher/authentication specific data.
Signed-off-by Srujana Challa <[email protected]>--- device-types/crypto/description.tex | 134 ++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+)device- renamed from device-types/crypto/description.tex +0
-0types/crypto/description.tex
index df863da..23128da 100644device-types/crypto/description.tex +10
-0@@ -334,6 +334,20 @@ \subsection{Device and driver capabilities}\label{sec:Device Types / Crypto Devi \hline \end{tabularx} +\subsection{Device resource objects}\label{sec:Device Types / Crypto +Device / Device resource objects} + +The crypto device has the following resource objects. + +\begin{tabularx}{\textwidth}{ |l||l|X| } \hline type & Name & +Description \\ \hline \hline +0x0200 & \hyperref[par:Device Types / Crypto Device / Device Operation +/ IPsec Service Operation / Resource objects / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA]{VIRTIO_CRYPTO_RESOURCE_OB
device-types/crypto/description.tex +4
-0+J_IPSEC_OUTBOUND_SA} & IPsec outbound SA resource object \\ \hline +0x0201 & \hyperref[par:Device Types / Crypto Device / Device Operation +/ IPsec Service Operation / Resource objects / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-INBOUND-SA]{VIRTIO_CRYPTO_RESOURCE_OBJ
device-types/crypto/description.tex +3
-0+_IPSEC_INBOUND_SA} & IPsec inbound SA resource object \\ \hline +\end{tabularx} + \subsection{Device Operation}\label{sec:Device Types / Crypto Device /Device Operation}
The operation of a virtio crypto device is driven by requests placed on the
virtqueues.device-types/crypto/description.tex +6
-0@@ -2022,3 +2036,123 @@ \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / \hline \end{tabularx} \end{table} + +\paragraph{Resource objects} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Resource objects} + +\subparagraph{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA}\label{par:D
device-types/crypto/description.tex +9
-0+evice Types / Crypto Device / Device Operation / IPsec Service +Operation / Resource objects / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA} + +A driver can have outbound SAs between 0 and \field{outb_sa_limit}, as +specified by the capability VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the +IPsec outbound SA resource object \field{resource_obj_specific_data} is +in the format \field{struct virtio_crypto_resource_obj_ipsec_sa}. +
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2059
Quoted 10 lines
device-types/crypto/description.tex +10
-0+\begin{lstlisting} +struct virtio_crypto_ipsec_tunnel_param { + /* Tunnel type: IPv4 or IPv6 */ + u8 type; + u8 reserved[3]; + union { + /* IPv4 tunnel header parameters */ + struct { + /* IPv4 source address */ + struct in_addr src_ip;
Need to define in_addr and in6_addr.
Quoted 7 lines
device-types/crypto/description.tex +7
-0+ /* IPv4 destination address */ + struct in_addr dst_ip; + /* IPv4 Differentiated Services Code Point */ + uint8_t dscp; + /* IPv4 Don't Fragment bit */ + uint8_t df; + /* IPv4 Time To Live */
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2076
Quoted 10 lines
device-types/crypto/description.tex +10
-0+ uint8_t ttl; + } ipv4; + /* IPv6 tunnel header parameters */ + struct { + /* IPv6 source address */ + struct in6_addr src_addr; + /* IPv6 destination address */ + struct in6_addr dst_addr; + /* IPv6 flow label */ + uint32_t flabel;
Le32
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2084
Quoted 8 lines
device-types/crypto/description.tex +8
-0+ /* IPv6 hop limit */ + uint8_t hlimit; + /* IPv6 Differentiated Services Code Point */ + uint8_t dscp; + } ipv6; + }; +}; +
Later after the struct, we should write down saying fields A, B, C maps to RFC fields A, B, C respectively.
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2096
Quoted 12 lines
device-types/crypto/description.tex +12
-0+struct virtio_crypto_resource_obj_ipsec_sa { + le32 spi; + le32 salt; + le64 options; + struct virtio_crypto_ipsec_tunnel_param param; + le64 esn; + le16 udp_sport; + le16 udp_dport; + le32 replay_win_sz; + le64 cipher_algo; + struct { + u8 *data;
Shouldn't this be some descriptor pointer or?
Is this suppose to be inline data[] array of variable length? If its later, length should be before data so that one can discover it.
Quoted 1 line
+ le16 length;
Length to be first so one can do the length of the data.
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2103
Quoted 6 lines
device-types/crypto/description.tex +6
-0+ } cipher_key; + le64 auth_algo; + struct { + u8 *data; + le16 length; + } auth_key;
Same as above.
Quoted 65 lines
device-types/crypto/description.tex +7
-0+ le32 obj_id; + u8 mode; + u8 direction; +} +\end{lstlisting} + +\field{spi} is the Security Parameter Index(SPI) used to uniquely identify theIPsec SA.
+\field{salt} is the 32 bit salt value used in the cryptographic operations. +
+\field{options} specifies the Options for configuring the IPsec SA, see +\ref{table:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Device and driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options}.device-types/crypto/description.tex +18
-0+ +\field{param} specifies the parameters for IPsec tunnel mode. +\field{esn} is the starting sequence number. +\field{udp_sport} is the source port for UDP encapsulation. +\field{udp_dport} is the destination port for UDP encapsulation. +\field{replay_win_sz} is the anti-replay window size to enable sequence +replay attack handling, replay checking is disabled if the window size is 0. + +\field{cipher_algo} is the cipher algorithm identifier see +\ref{sec:Device Types / Crypto Device / Supported crypto services / +CIPHER services} \field{cipher_key} specifies the cipher key and its length. +\field{auth_algo} is the Authentication algorithm identifier +\field{auth_key} specifies the authentication key data and its length. +\field{obj_id} specifies the object id of the SA that can be used to +retrieve driver-defined data associated with the IPsec SA. + +\field{mode} specifies the mode of the IPsec SA, see \ref{table:Device +Types / Crypto Device / Device Operation / IPsec Service Operation / Deviceand driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes}.
device-types/crypto/description.tex +3
-0+ +\field{direction} specifies IPsec SA direction, see \ref{table:Device +Types / Crypto Device / Device Operation / IPsec Service Operation /Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA / IPsec Direction}.
device-types/crypto/description.tex +11
-0+ +\begin{table}[H] +\caption{IPsec Direction} +\label{table:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA / IPsec Direction} +\begin{tabularx}{\textwidth}{ |l|X|X| } \hline Type & Name & +Description \\ \hline \hline +0x0 & - & Reserved \\ +\hline +0x1 & VIRTIO_CRYPTO_IPSEC_DIR_OUTBOUND & IPsec direction outbound\\
+\hline
+0x2 &VIRTIO_CRYPTO_IPSEC_DIR_INBOUND& IPsec direction inbound \\
+\hline \end{tabularx} \end{table}
+ +\subparagraph{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA}\label {par:Dedevice-types/crypto/description.tex +7
-1+vice Types / Crypto Device / Device Operation / IPsec Service Operation +/ Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-INBOUND-SA} + +A driver can have inbound SAs between 0 and \field{inb_sa_limit}, as +specified by the capability VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the +IPsec inbound SA resource object \field{resource_obj_specific_data} is +in the format \field{struct virtio_crypto_resource_obj_ipsec_sa}. --2.25.1
RE: [PATCH RFC v2 2/4] virtio-crypto: Add resource objects for IPsec outbound and inbound SAs
Quoted 69 lines
Quoted 53 lines
From: Srujana Challa <[email protected]>
Sent: Monday, December 16, 2024 3:51 PMThis commit introduces resource objects to enable the driver/device to create IPsec Security Associations (SAs) for both inbound and outbound directions.
The IPsec SA objects include essential parameters required for packet outbound and inbound processing, such as SPI, tunnel headers, IPsec mode, IPsec options and cipher/authentication specific data.
Signed-off-by Srujana Challa <[email protected]>--- device-types/crypto/description.tex | 134 ++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+)device- renamed from device-types/crypto/description.tex +0
-0types/crypto/description.tex index df863da..23128da 100644
device-types/crypto/description.tex +0
-0@@ -334,6 +334,20 @@ \subsection{Device and drivercapabilities}\label{sec:Device Types / Crypto Devi \hline \end{tabularx}
+\subsection{Device resource objects}\label{sec:Device Types / Crypto
device-types/crypto/description.tex +9
-0+Device / Device resource objects} + +The crypto device has the following resource objects. + +\begin{tabularx}{\textwidth}{ |l||l|X| } \hline type & Name & +Description \\ \hline \hline +0x0200 & \hyperref[par:Device Types / Crypto Device / Device +Operation / IPsec Service Operation / Resource objects / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA]{VIRTIO_CRYPTO_RESOURCE_OB
device-types/crypto/description.tex +4
-0+J_IPSEC_OUTBOUND_SA} & IPsec outbound SA resource object \\ \hline +0x0201 & \hyperref[par:Device Types / Crypto Device / Device +Operation / IPsec Service Operation / Resource objects / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-INBOUND-SA]{VIRTIO_CRYPTO_RESOURCE_OBJ
device-types/crypto/description.tex +3
-0+_IPSEC_INBOUND_SA} & IPsec inbound SA resource object \\ \hline +\end{tabularx} + \subsection{Device Operation}\label{sec:Device Types / Crypto Device/ Device Operation}
The operation of a virtio crypto device is driven by requests placed
on the virtqueues.device-types/crypto/description.tex +0
-0@@ -2022,3 +2036,123 @@ \subsubsection{IPSEC ServiceOperation}\label{sec:Device Types / Crypto Device / \hline \end{tabularx} \end{table}
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2042
Quoted 5 lines
device-types/crypto/description.tex +5
-0+ +\paragraph{Resource objects} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Resource objects} ++\subparagraph{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA}\la
device-types/crypto/description.tex
Quoted 9 lines
bel{par:D
device-types/crypto/description.tex +8
-0+evice Types / Crypto Device / Device Operation / IPsec Service +Operation / Resource objects / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA} + +A driver can have outbound SAs between 0 and \field{outb_sa_limit}, +as specified by the capability VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For +the IPsec outbound SA resource object +\field{resource_obj_specific_data} is in the format \field{struct
virtio_crypto_resource_obj_ipsec_sa}.
Quoted 12 lines
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2059
Quoted 11 lines
device-types/crypto/description.tex +11
-0+ +\begin{lstlisting} +struct virtio_crypto_ipsec_tunnel_param { + /* Tunnel type: IPv4 or IPv6 */ + u8 type; + u8 reserved[3]; + union { + /* IPv4 tunnel header parameters */ + struct { + /* IPv4 source address */ + struct in_addr src_ip;Need to define
in_addrandin6_addr.
Will do.
Quoted 18 lines
Quoted 8 lines
device-types/crypto/description.tex +7
-0+ /* IPv4 destination address */ + struct in_addr dst_ip; + /* IPv4 Differentiated Services Code Point */ + uint8_t dscp; + /* IPv4 Don't Fragment bit */ + uint8_t df; + /* IPv4 Time To Live */device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2076
Quoted 10 lines
device-types/crypto/description.tex +10
-0+ uint8_t ttl; + } ipv4; + /* IPv6 tunnel header parameters */ + struct { + /* IPv6 source address */ + struct in6_addr src_addr; + /* IPv6 destination address */ + struct in6_addr dst_addr; + /* IPv6 flow label */ + uint32_t flabel;
Quoted 1 line
Le32
Will do.
Quoted 22 lines
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2084
Quoted 8 lines
device-types/crypto/description.tex +8
-0+ /* IPv6 hop limit */ + uint8_t hlimit; + /* IPv6 Differentiated Services Code Point */ + uint8_t dscp; + } ipv6; + }; +}; +Later after the struct, we should write down saying fields A, B, C maps to RFC fields A, B, C respectively.
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2096
Quoted 12 lines
device-types/crypto/description.tex +12
-0+struct virtio_crypto_resource_obj_ipsec_sa { + le32 spi; + le32 salt; + le64 options; + struct virtio_crypto_ipsec_tunnel_param param; + le64 esn; + le16 udp_sport; + le16 udp_dport; + le32 replay_win_sz; + le64 cipher_algo; + struct { + u8 *data;
Quoted 3 lines
Shouldn't this be some descriptor pointer or?
Is this suppose to be inline data[] array of variable length? If its later, length should be before data so that one can discover it.
It's later one, will modify it.
Quoted 72 lines
Quoted 2 lines
+ le16 length;
Length to be first so one can do the length of the data.
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2103
Quoted 6 lines
device-types/crypto/description.tex +6
-0+ } cipher_key; + le64 auth_algo; + struct { + u8 *data; + le16 length; + } auth_key;Same as above.
Quoted 16 lines
device-types/crypto/description.tex +8
-0+ le32 obj_id; + u8 mode; + u8 direction; +} +\end{lstlisting} + +\field{spi} is the Security Parameter Index(SPI) used to uniquely +identify theIPsec SA.
+\field{salt} is the 32 bit salt value used in the cryptographic operations.device-types/crypto/description.tex +4
-0+ +\field{options} specifies the Options for configuring the IPsec SA, +see \ref{table:Device Types / Crypto Device / Device Operation / +IPsec ServiceOperation / Device and driver capabilities /
VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Options}.device-types/crypto/description.tex
Quoted 7 lines
device-types/crypto/description.tex +7
-0+ +\field{param} specifies the parameters for IPsec tunnel mode. +\field{esn} is the starting sequence number. +\field{udp_sport} is the source port for UDP encapsulation. +\field{udp_dport} is the destination port for UDP encapsulation. +\field{replay_win_sz} is the anti-replay window size to enable +sequence replay attack handling, replay checking is disabled if the windowsize is 0.
Quoted 29 lines
device-types/crypto/description.tex +12
-0+ +\field{cipher_algo} is the cipher algorithm identifier see +\ref{sec:Device Types / Crypto Device / Supported crypto services / +CIPHER services} \field{cipher_key} specifies the cipher key and its length. +\field{auth_algo} is the Authentication algorithm identifier +\field{auth_key} specifies the authentication key data and its length. +\field{obj_id} specifies the object id of the SA that can be used to +retrieve driver-defined data associated with the IPsec SA. + +\field{mode} specifies the mode of the IPsec SA, see +\ref{table:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Deviceand driver capabilities / VIRTIO-CRYPTO-IPSEC-SA-CAP / IPsec Modes}.
device-types/crypto/description.tex +3
-0+ +\field{direction} specifies IPsec SA direction, see \ref{table:Device +Types / Crypto Device / Device Operation / IPsec Service Operation /Resource objects / VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA / IPsec Direction}.
device-types/crypto/description.tex +11
-0+ +\begin{table}[H] +\caption{IPsec Direction} +\label{table:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Device and driver capabilities / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-OUTBOUND-SA / IPsec Direction} +\begin{tabularx}{\textwidth}{ |l|X|X| } \hline Type & Name & +Description \\ \hline \hline +0x0 & - & Reserved \\ +\hline +0x1 & VIRTIO_CRYPTO_IPSEC_DIR_OUTBOUND & IPsec direction outboundQuoted 6 lines
\\
+\hline
+0x2 &VIRTIO_CRYPTO_IPSEC_DIR_INBOUND& IPsec direction inbound \\
+\hline \end{tabularx} \end{table}
++\subparagraph{VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA}\labe l
Quoted 11 lines
Quoted 11 lines
{par:De
device-types/crypto/description.tex +8
-1+vice Types / Crypto Device / Device Operation / IPsec Service +Operation / Resource objects / +VIRTIO-CRYPTO-RESOURCE-OBJ-IPSEC-INBOUND-SA} + +A driver can have inbound SAs between 0 and \field{inb_sa_limit}, as +specified by the capability VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the +IPsec inbound SA resource object \field{resource_obj_specific_data} +is in the format \field{struct virtio_crypto_resource_obj_ipsec_sa}. --2.25.1
Thanks.
RFC PATCH v2 3/4 virtio-crypto: Add new IPsec opcodes to data request
In reply to Srujana ChallaAdds new IPsec opcodes, VIRTIO_CRYPTO_IPSEC_OUTBOUND and VIRTIO_CRYPTO_IPSEC_INBOUND and defines opcode specific data structures for IPsec data processing.
--- device-types/crypto/description.tex | 81 ++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-)
device-types/crypto/description.tex +80 -1
@@ -990,6 +990,10 @@ \subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device / Device O VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02) #define VIRTIO_CRYPTO_AKCIPHER_VERIFY \ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03) +#define VIRTIO_CRYPTO_IPSEC_OUTBOUND \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_IPSEC, 0x00) +#define VIRTIO_CRYPTO_IPSEC_INBOUND \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_IPSEC, 0x01) le32 opcode; /* algo should be service-specific algorithms */ le32 algo;
@@ -1007,6 +1011,17 @@ \subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device / Device O If VIRTIO_CRYPTO_F_REVISION_1 is negotiated but VIRTIO_CRYPTO_F_<SERVICE>_STATELESS_MODE is not negotiated, then the device SHOULD reject <SERVICE> requests if VIRTIO_CRYPTO_FLAG_SESSION_MODE is not set (in \field{flag}). + +For VIRTIO_CRYPTO_IPSEC_OUTBOUND and VIRTIO_CRYPTO_IPSEC_INBOUND opcodes, +\field{algo} is ignored. + +For VIRTIO_CRYPTO_IPSEC_OUTBOUND opcode, \field{session_id} MUST be set to +one of the resource objects \field{id} created using +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA resource type. + +For VIRTIO_CRYPTO_IPSEC_INBOUND opcode, \field{session_id} MUST be set to +one of the resource objects \field{id} created using +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA resource type. \end{note} The dataq request is composed of four parts:
@@ -1094,6 +1109,13 @@ \subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device / Device O and struct virtio_crypto_akcipher_data_flf is padded to 48 bytes if NOT negotiated, and \field{op_vlf} is struct virtio_crypto_akcipher_data_vlf. \end{itemize*} +\item If the the opcode (in \field{header}) is VIRTIO_CRYPTO_IPSEC_OUTBOUND + or VIRTIO_CRYPTO_IPSEC_INBOUND then: + \begin{itemize*} + \item \field{op_flf} is struct virtio_crypto_ipsec_data_flf. + and \field{op_vlf} is struct virtio_crypto_ipsec_data_vlf. + Works only for session mode. + \end{itemize*} \end{itemize*} \field{inhdr} is a unified input header that used to return the status of
@@ -1914,8 +1936,23 @@ \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / in tunnel mode, as well as the ESP/AH header from the packet. The resulting packet contains only the plain data. +The driver can offload IPsec Inbound processing by +\begin{itemize*} +\item Creating inbound SAs using the VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA command. +\item Setting the \field{opcode} in struct virtio_crypto_op_data_req to +VIRTIO_CRYPTO_IPSEC_INBOUND. +\end{itemize*} + IPsec Outbound processing: The device will perform encryption, attach ICV, -update/add IP headers, add ESP/AH headers/trailers. +update/add IP headers, add ESP/AH headers/trailers during data processing. + +The driver can offload IPsec outbound processing by creating outbound SAs +\begin{itemize*} +\item Creating outbound SAs using the VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA command. +\item Setting the \field{opcode} in struct virtio_crypto_op_data_req to +VIRTIO_CRYPTO_IPSEC_OUTBOUND. +\end{itemize*} +See \ref{sec:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Data processing} A crypto device can support number of IPsec SAs, allowing it to manage multiple secure connections simultaneously.
@@ -2156,3 +2193,45 @@ \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / capability VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the IPsec inbound SA resource object \field{resource_obj_specific_data} is in the format \field{struct virtio_crypto_resource_obj_ipsec_sa}. + +\paragraph{Data processing} +\label{par:Device Types / Crypto Device / Device Operation / IPsec Service Operation / Data processing} + +Data requests for IPsec processing are as follows: + +\begin{lstlisting} +struct virtio_crypto_ipsec_data_flf { + /* length of source data, full IP/IPsec packet */ + le32 src_data_len; + /* length of dst data */ + le32 dst_data_len; +}; + +struct virtio_crypto_ipsec_data_vlf { + /* Device read only portion */ + /* Source data */ + u8 src_data[src_data_len]; + + /* Device write only portion */ + /* Pointer to output data */ + u8 dst_data[dst_data_len]; +}; +\end{lstlisting} + +Each data request uses the virtio_crypto_ipsec_data_flf structure and +the virtio_crypto_ipsec_data_vlf structure to store information used to +run the IPSEC operations. + +For IPsec encryption: +\field{src_data} is the full IP packet that will be processed. +\field{src_data_len} is the length of source data. +\field{dst_result} is the result ESP encrypted packet and +\field{dst_data_len} is the length of it. Please note, +dst_data_len SHOULD include additional header and trailer +lengths. + +For IPsec decryption: +\field{src_data} is the IPsec packet that will be processed. +\field{src_data_len} is the length of source data. +\field{dst_result} is the result plain IP packet and +\field{dst_data_len} is the length of it.
Signature · 1 line
2.25.1
RE: [PATCH RFC v2 3/4] virtio-crypto: Add new IPsec opcodes to data request
Quoted 76 lines
From: Srujana Challa <[email protected]>
Sent: Monday, December 16, 2024 3:51 PMAdds new IPsec opcodes,
VIRTIO_CRYPTO_IPSEC_OUTBOUNDandVIRTIO_CRYPTO_IPSEC_INBOUNDand defines opcode specific data structures for IPsec data processing.Reviewed-by Matias Ezequiel Vara Larsen <[email protected]>Signed-off-by Srujana Challa <[email protected]>--- device-types/crypto/description.tex | 81 ++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-)device- renamed from device-types/crypto/description.tex +0
-0types/crypto/description.tex
index 23128da..5f73039 100644device-types/crypto/description.tex +0
-0@@ -990,6 +990,10 @@ \subsubsection{Data Virtqueue}\label{sec:DeviceTypes / Crypto Device / Device O
VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02) #define VIRTIO_CRYPTO_AKCIPHER_VERIFY \ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03)device-types/crypto/description.tex +4
-0+#define VIRTIO_CRYPTO_IPSEC_OUTBOUND \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_IPSEC, 0x00) #define +VIRTIO_CRYPTO_IPSEC_INBOUND \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_IPSEC, 0x01) le32 opcode; /* algo should be service-specific algorithms */ le32 algo;@@ -1007,6 +1011,17 @@ \subsubsection{Data Virtqueue}\label{sec:DeviceTypes / Crypto Device / Device O If
VIRTIO_CRYPTO_F_REVISION_1is negotiated but VIRTIO_CRYPTO_F_<SERVICE>_STATELESS_MODE
is not negotiated, then the device SHOULD reject <SERVICE> requests ifVIRTIO_CRYPTO_FLAG_SESSION_MODEis not set (in \field{flag}).device-types/crypto/description.tex +2
-0+ +For VIRTIO_CRYPTO_IPSEC_OUTBOUND and
VIRTIO_CRYPTO_IPSEC_INBOUNDdevice-types/crypto/description.tex +3
-0+opcodes, \field{algo} is ignored. + +For VIRTIO_CRYPTO_IPSEC_OUTBOUND opcode, \field{session_id} MUST beset
device-types/crypto/description.tex +4
-0+to one of the resource objects \field{id} created using +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA resource type. + +For VIRTIO_CRYPTO_IPSEC_INBOUND opcode, \field{session_id} MUST beset
device-types/crypto/description.tex +2
-0+to one of the resource objects \field{id} created using +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA resource type. \end{note} The dataq request is composed of four parts:@@ -1094,6 +1109,13 @@ \subsubsection{Data Virtqueue}\label{sec:DeviceTypes / Crypto Device / Device O
and structvirtio_crypto_akcipher_data_flfis padded to 48 bytes if NOT
negotiated,
and \field{op_vlf} is structvirtio_crypto_akcipher_data_vlf.
\end{itemize*}
+\item If the the opcode (in \field{header}) isVIRTIO_CRYPTO_IPSEC_OUTBOUNDdevice-types/crypto/description.tex +6
-0+ or VIRTIO_CRYPTO_IPSEC_INBOUND then: + \begin{itemize*} + \item \field{op_flf} is struct virtio_crypto_ipsec_data_flf. + and \field{op_vlf} is struct virtio_crypto_ipsec_data_vlf. + Works only for session mode. + \end{itemize*} \end{itemize*} \field{inhdr} is a unified input header that used to return the status of @@ -1914,8 +1936,23 @@ \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / in tunnel mode, as well as the ESP/AH header from the packet. The resulting packet contains only the plain data.
Quoted 1 line
+The driver can offload IPsec Inbound processing by \begin{itemize*}
s/offload/request
Quoted 46 lines
+\item Creating inbound SAs using the
VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SAcommand.
+\item Setting the \field{opcode} in structvirtio_crypto_op_data_reqtodevice-types/crypto/description.tex +3
-0+VIRTIO_CRYPTO_IPSEC_INBOUND. +\end{itemize*} + IPsec Outbound processing: The device will perform encryption, attach ICV, -update/add IP headers, add ESP/AH headers/trailers.
device-types/crypto/description.tex +10
-0+update/add IP headers, add ESP/AH headers/trailers during data processing. + +The driver can offload IPsec outbound processing by creating outbound +SAs \begin{itemize*} \item Creating outbound SAs using the +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA command. +\item Setting the \field{opcode} in struct virtio_crypto_op_data_req to +VIRTIO_CRYPTO_IPSEC_OUTBOUND. +\end{itemize*} +See \ref{sec:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Data processing} A crypto device can support number of IPsec SAs, allowing it to managemultiple secure connections simultaneously.
device-types/crypto/description.tex +0
-0@@ -2156,3 +2193,45 @@ \subsubsection{IPSEC ServiceOperation}\label{sec:Device Types / Crypto Device / capability
VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the IPsec inbound SA resource object \field{resource_obj_specific_data} is in the format \field{structvirtio_crypto_resource_obj_ipsec_sa}.device-types/crypto/description.tex +20
-0+ +\paragraph{Data processing} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Data processing} + +Data requests for IPsec processing are as follows: + +\begin{lstlisting} +struct virtio_crypto_ipsec_data_flf { + /* length of source data, full IP/IPsec packet */ + le32 src_data_len; + /* length of dst data */ + le32 dst_data_len; +}; + +struct virtio_crypto_ipsec_data_vlf { + /* Device read only portion */ + /* Source data */ + u8 src_data[src_data_len]; +
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2224
Quoted 10 lines
device-types/crypto/description.tex +10
-0+ /* Device write only portion */ + /* Pointer to output data */ + u8 dst_data[dst_data_len]; +}; +\end{lstlisting} + +Each data request uses the virtio_crypto_ipsec_data_flf structure and +the virtio_crypto_ipsec_data_vlf structure to store information used to +run the IPSEC operations. +
I am not familiar with acronyms flf and vlf.
Can we right something else or?
Also do we need this length here? Or can this be the descriptor(s) itself?
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2232
Quoted 7 lines
device-types/crypto/description.tex +7
-0+For IPsec encryption: +\field{src_data} is the full IP packet that will be processed. +\field{src_data_len} is the length of source data. +\field{dst_result} is the result ESP encrypted packet and +\field{dst_data_len} is the length of it. Please note, dst_data_len +SHOULD include additional header and trailer lengths. +
I believe this should be MUST.
Quoted 7 lines
+For IPsec decryption:
+\field{src_data} is the IPsec packet that will be processed. +\field{src_data_len} is the length of source data. +\field{dst_result} is the result plain IP packet and +\field{dst_data_len} is the length of it.
--
2.25.1
RE: [PATCH RFC v2 3/4] virtio-crypto: Add new IPsec opcodes to data request
Quoted 79 lines
Quoted 23 lines
From: Srujana Challa <[email protected]>
Sent: Monday, December 16, 2024 3:51 PMAdds new IPsec opcodes,
VIRTIO_CRYPTO_IPSEC_OUTBOUNDandVIRTIO_CRYPTO_IPSEC_INBOUNDand defines opcode specific data structures for IPsec data processing.Reviewed-by Matias Ezequiel Vara Larsen <[email protected]>Signed-off-by Srujana Challa <[email protected]>--- device-types/crypto/description.tex | 81 ++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-)device- renamed from device-types/crypto/description.tex +0
-0types/crypto/description.tex index 23128da..5f73039 100644
device-types/crypto/description.tex +0
-0@@ -990,6 +990,10 @@ \subsubsection{Data Virtqueue}\label{sec:DeviceTypes / Crypto Device / Device O
VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02) #define VIRTIO_CRYPTO_AKCIPHER_VERIFY \ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03)device-types/crypto/description.tex \subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device / Device O · line 994
Quoted 2 lines
device-types/crypto/description.tex +2
-0+#define VIRTIO_CRYPTO_IPSEC_OUTBOUND \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_IPSEC, 0x00)#define
device-types/crypto/description.tex \subsubsection{Data
Quoted 6 lines
device-types/crypto/description.tex +2
-0+VIRTIO_CRYPTO_IPSEC_INBOUND \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_IPSEC, 0x01) le32 opcode; /* algo should be service-specific algorithms */ le32 algo;@@ -1007,6 +1011,17 @@ \subsubsection{DataVirtqueue}\label{sec:Device
device-types/crypto/description.tex
Quoted 10 lines
Types / Crypto Device / Device O If
VIRTIO_CRYPTO_F_REVISION_1is negotiated but VIRTIO_CRYPTO_F_<SERVICE>_STATELESS_MODE
is not negotiated, then the device SHOULD reject <SERVICE> requests
ifVIRTIO_CRYPTO_FLAG_SESSION_MODEis not set (in \field{flag}).device-types/crypto/description.tex +2
-0+ +For VIRTIO_CRYPTO_IPSEC_OUTBOUND and
VIRTIO_CRYPTO_IPSEC_INBOUNDdevice-types/crypto/description.tex +3
-0+opcodes, \field{algo} is ignored. + +For VIRTIO_CRYPTO_IPSEC_OUTBOUND opcode, \field{session_id} MUSTbe
device-types/crypto/description.tex \subsubsection{Data
Quoted 12 lines
set
device-types/crypto/description.tex +4
-0+to one of the resource objects \field{id} created using +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA resource type. + +For VIRTIO_CRYPTO_IPSEC_INBOUND opcode, \field{session_id} MUST beset
device-types/crypto/description.tex +2
-0+to one of the resource objects \field{id} created using +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA resource type. \end{note} The dataq request is composed of four parts:@@ -1094,6 +1109,13 @@ \subsubsection{DataVirtqueue}\label{sec:Device
Quoted 22 lines
Types / Crypto Device / Device O
and structvirtio_crypto_akcipher_data_flfis padded to 48
bytes if NOT negotiated,
and \field{op_vlf} is structvirtio_crypto_akcipher_data_vlf.
\end{itemize*}
+\item If the the opcode (in \field{header}) isVIRTIO_CRYPTO_IPSEC_OUTBOUNDdevice-types/crypto/description.tex +6
-0+ or VIRTIO_CRYPTO_IPSEC_INBOUND then: + \begin{itemize*} + \item \field{op_flf} is struct virtio_crypto_ipsec_data_flf. + and \field{op_vlf} is struct virtio_crypto_ipsec_data_vlf. + Works only for session mode. + \end{itemize*} \end{itemize*} \field{inhdr} is a unified input header that used to return thestatus of @@ -
1914,8 +1936,23 @@ \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / in tunnel mode, as well as the ESP/AH header from the packet. The resulting packet contains only the plain data.
Quoted 2 lines
Quoted 1 line
+The driver can offload IPsec Inbound processing by \begin{itemize*}
s/offload/request
Will do.
Quoted 61 lines
Quoted 10 lines
+\item Creating inbound SAs using the
VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SAcommand. +\item Setting the \field{opcode} in structvirtio_crypto_op_data_reqdevice-types/crypto/description.tex +3
-0+to VIRTIO_CRYPTO_IPSEC_INBOUND. +\end{itemize*} + IPsec Outbound processing: The device will perform encryption, attachICV, - update/add IP headers, add ESP/AH headers/trailers. +update/add IP headers, add ESP/AH headers/trailers during data
processing.
Quoted 37 lines
device-types/crypto/description.tex +9
-0+ +The driver can offload IPsec outbound processing by creating outbound +SAs \begin{itemize*} \item Creating outbound SAs using the +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA command. +\item Setting the \field{opcode} in struct virtio_crypto_op_data_req +to VIRTIO_CRYPTO_IPSEC_OUTBOUND. +\end{itemize*} +See \ref{sec:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Data processing} A crypto device can support number of IPsec SAs, allowing it tomanage multiple secure connections simultaneously.
device-types/crypto/description.tex +0
-0@@ -2156,3 +2193,45 @@ \subsubsection{IPSEC ServiceOperation}\label{sec:Device Types / Crypto Device / capability
VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP. For the IPsec inbound SA resource object \field{resource_obj_specific_data} is in the format \field{structvirtio_crypto_resource_obj_ipsec_sa}.device-types/crypto/description.tex +20
-0+ +\paragraph{Data processing} +\label{par:Device Types / Crypto Device / Device Operation / IPsec +Service Operation / Data processing} + +Data requests for IPsec processing are as follows: + +\begin{lstlisting} +struct virtio_crypto_ipsec_data_flf { + /* length of source data, full IP/IPsec packet */ + le32 src_data_len; + /* length of dst data */ + le32 dst_data_len; +}; + +struct virtio_crypto_ipsec_data_vlf { + /* Device read only portion */ + /* Source data */ + u8 src_data[src_data_len]; +device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2224
Quoted 10 lines
device-types/crypto/description.tex +10
-0+ /* Device write only portion */ + /* Pointer to output data */ + u8 dst_data[dst_data_len]; +}; +\end{lstlisting} + +Each data request uses the virtio_crypto_ipsec_data_flf structure and +the virtio_crypto_ipsec_data_vlf structure to store information used +to run the IPSEC operations. +I am not familiar with acronyms flf and vlf.
Can we right something else or?
Quoted 2 lines
Also do we need this length here? Or can this be the descriptor(s) itself?
flf stands for fixed length format and vlf is variable length format. These terms are used for all other crypto services.
Generic descriptor format of crypto data request is
struct virtio_crypto_op_data_req {
/* Device read only portion */
struct virtio_crypto_op_header header;
#define VIRTIO_CRYPTO_DATAQ_OP_SPEC_HDR_LEGACY 48
/* fixed length fields, opcode specific */
u8 op_flf[flf_len];
/* Device read && write portion */
/* variable length fields, opcode specific */
u8 op_vlf[vlf_len];
/* Device write only portion */
struct virtio_crypto_inhdr inhdr;
};For IPsec service operation, op_flf is struct virtio_crypto_ipsec_data_flf and op_vlf is struct virtio_crypto_ipsec_data_vlf.
Quoted 8 lines
device-types/crypto/description.tex \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / · line 2232
Quoted 7 lines
device-types/crypto/description.tex +7
-0+For IPsec encryption: +\field{src_data} is the full IP packet that will be processed. +\field{src_data_len} is the length of source data. +\field{dst_result} is the result ESP encrypted packet and +\field{dst_data_len} is the length of it. Please note, dst_data_len +SHOULD include additional header and trailer lengths. +I believe this should be MUST.
Will do.
Quoted 7 lines
Quoted 7 lines
+For IPsec decryption:
+\field{src_data} is the IPsec packet that will be processed. +\field{src_data_len} is the length of source data. +\field{dst_result} is the result plain IP packet and +\field{dst_data_len} is the length of it.
--
2.25.1
Thanks.
RFC PATCH v2 4/4 virtio-crypto: Add device and driver requirements for IPsec operation
In reply to Srujana ChallaAdd device and driver requirements for IPsec Operation.
--- device-types/crypto/description.tex | 100 +++++++++++++++++++++ device-types/crypto/device-conformance.tex | 1 + device-types/crypto/driver-conformance.tex | 1 + 3 files changed, 102 insertions(+)
device-types/crypto/description.tex +100 -0
@@ -2235,3 +2235,103 @@ \subsubsection{IPSEC Service Operation}\label{sec:Device Types / Crypto Device / \field{src_data_len} is the length of source data. \field{dst_result} is the result plain IP packet and \field{dst_data_len} is the length of it. + +\devicenormative{\paragraph}{IPsec Service Operation}{Device Types / Crypto Device / Device Operation / IPsec Service Operation} + +When the device supports IPsec operations, +\begin{itemize} +\item the device MUST set VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP, VIRTIO_CRYPTO_IPSEC_SA_CAP +capability in the \field{supported_caps} in the command VIRTIO_ADMIN_CMD_CAP_SUPPORT_QUERY. +\item the device MUST support the administration commands +VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE, +VIRTIO_ADMIN_CMD_RESOURCE_OBJ_MODIFY, VIRTIO_ADMIN_CMD_RESOURCE_OBJ_QUERY, +VIRTIO_ADMIN_CMD_RESOURCE_OBJ_DESTROY for the resource types +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA and VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA. +\end{itemize} + +When any of the VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP or VIRTIO_CRYPTO_IPSEC_SA_CAP +capability is disabled, the device MUST set \field{status} to +VIRTIO_ADMIN_STATUS_Q_INVALID_OPCODE for the commands +VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE, +VIRTIO_ADMIN_CMD_RESOURCE_OBJ_MODIFY, VIRTIO_ADMIN_CMD_RESOURCE_OBJ_QUERY, +and VIRTIO_ADMIN_CMD_RESOURCE_OBJ_DESTROY. + +The device MUST set \field{status} to VIRTIO_ADMIN_STATUS_EEXIST for the +command VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE when the resource \field{type} +is VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA or VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA, +if the object already exists with the supplied \field{id}. + +The device MUST set \field{status} to VIRTIO_ADMIN_STATUS_EBUSY for the +command VIRTIO_ADMIN_CMD_RESOURCE_OBJ_DESTROY when the resource \field{type} +is VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA or VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA, +if the object is in use. + +The device MUST fail the command VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE with +the \field{status} set to VIRTIO_ADMIN_STATUS_EINVAL, for the +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA object if, +\begin{itemize} +\item \field{id} is greater than or equal to \field{outb_sa_limit}. +\item the supplied SA parameters, such as mode, options, cipher and authentication + algorithms are not supported in the capabitlity VIRTIO_CRYPTO_IPSEC_SA_CAP. +\end{itemize} + +The device MUST fail the command VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE with +the \field{status} set to VIRTIO_ADMIN_STATUS_EINVAL, for the +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA object if, +\begin{itemize} +\item \field{id} is greater than or equal to \field{inb_sa_limit}. +\item the supplied SA parameters, such as mode, options, cipher and authentication + algorithms are not supported in the capabitlity VIRTIO_CRYPTO_IPSEC_SA_CAP. +\end{itemize} + +The device SHOULD maintain a table for subsequent lookups for inbound/outbound data +processing with the corresponding SA based on the supplied \field{id}. + +The device MUST allow recreating the resource objects using the command +VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE which was previously destroyed using +the command VIRTIO_ADMIN_CMD_RESOURCE_OBJ_DESTROY respectively without +undergoing a device reset. + +The device MAY fail the command VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE with +the \field{status} set to VIRTIO_ADMIN_STATUS_EINVAL for the +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA or VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA +commands if the resource object with the same \field{spi} already exists. + +On device reset, the device MUST destroy all the resource objects which have been created. + +The device MUST copy the result of IPsec operation in the \field{dst_data[]}. +The device MUST set the \field{status} field in struct virtio_crypto_inhdr to +one of the following values of enum VIRTIO_CRYPTO_STATUS: +\begin{itemize*} +\item VIRTIO_CRYPTO_OK if the operation success. +\item VIRTIO_CRYPTO_NOTSUPP if the requested algorithm or operation is unsupported. +\item VIRTIO_CRYPTO_BADMSG if the integrity check is failed for IPsec decryption. +\item VIRTIO_CRYPTO_INVSESS if the session ID invalid. +\item VIRTIO_CRYPTO_ERR if any failure not mentioned above occurs. +\end{itemize*} + +\drivernormative{\paragraph}{IPsec Service Operation}{Device Types / Crypto Device / Device Operation / IPsec Service Operation} + +The driver MUST query the capabilities using VIRTIO_ADMIN_CMD_CAP_ID_LIST_QUERY +to discover the capability types the device offers. + +The driver MUST get VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP and VIRTIO_CRYPTO_IPSEC_SA_CAP +if listed in VIRTIO_ADMIN_CMD_CAP_ID_LIST_QUERY command result, using +VIRTION_ADMIN_CMD_DEVICE_CAP_GET to discover the capabilities the device is +able to offer. +The driver MUST set VIRTIO_CRYPTO_IPSEC_RESOURCE_CAP and VIRTIO_CRYPTO_IPSEC_SA_CAP +using VIRTIO_ADMIN_CMD_DEVICE_CAP_SET to indicate the device which capability +the driver uses. + +For the command VIRTIO_ADMIN_CMD_RESOURCE_OBJ_CREATE, when creating a resource +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA, the driver MUST set all the parameters +in \field struct virtio_crypto_resource_obj_ipsec_sa with relevant values. +And when create a resource object VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA, +the driver MUST set all the parameters except +\field struct virtio_crypto_ipsec_tunnel_param. + +The driver MUST set \field{session_id} in struct virtio_crypto_op_header to a +valid VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_OUTBOUND_SA or +VIRTIO_CRYPTO_RESOURCE_OBJ_IPSEC_INBOUND_SA \field{id}. +The driver MUST set the \field{opcode} field in struct virtio_crypto_op_header +to one of VIRTIO_CRYPTO_IPSEC_OUTBOUND and VIRTIO_CRYPTO_IPSEC_INBOUND.
device-types/crypto/device-conformance.tex +1 -0
@@ -10,4 +10,5 @@ \item \ref{devicenormative:Device Types / Crypto Device / Device Operation / MAC Service Operation} \item \ref{devicenormative:Device Types / Crypto Device / Device Operation / Symmetric algorithms Operation} \item \ref{devicenormative:Device Types / Crypto Device / Device Operation / AEAD Service Operation} +\item \ref{devicenormative:Device Types / Crypto Device / Device Operation / IPsec Service Operation} \end{itemize}
device-types/crypto/driver-conformance.tex +1 -0
@@ -11,4 +11,5 @@ \item \ref{drivernormative:Device Types / Crypto Device / Device Operation / MAC Service Operation} \item \ref{drivernormative:Device Types / Crypto Device / Device Operation / Symmetric algorithms Operation} \item \ref{drivernormative:Device Types / Crypto Device / Device Operation / AEAD Service Operation} +\item \ref{drivernormative:Device Types / Crypto Device / Device Operation / IPsec Service Operation} \end{itemize}
Signature · 1 line
2.25.1