Skip to contentSkip to conversation

Sub-device configuration models

RFC Superseded Sakari Ailus 2 participants 23 messages Dec 20, 2024 – Jan 9, 2025 Media (V4L/DVB)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover Sub-device configuration models

Hello everyone,

I've been recently working (with others) on sub-device streams support as well as on internal pads. The two can be used to make sub-device configuration more versatile.

At the same time, the added interfaces are much more useful if we require specific semantics of those interfaces, so that the user space knows exactly what e.g. a given selection target signifies. However, as the same selection rectangle could be used for a different purpose on a non-raw sensor device, we need a way to tell how should the user space determine how to use a given interface.

I'm proposing to solve this problem by introducing sub-device configuration models, and by the common raw sensor model, also present in this patchset, in particular.

This has been (and will, for some time, continue to be) the reason why I have reviewed few sensor driver related patches lately. As we're introducing a new interface, it's beneficial to be able to use that interface right from the start, rather than trying to later on offer compatibility support, which is almost always a fair amount of work with less than desirable results in the driver.

With this solved, I believe we can enable the use of the streams UAPI.

Comments are welcome.

RFC v3 is <[email protected]> on LMML.

RFC v2 (labelled as PATCH) is <[email protected]> on LMML.

RFC v1 is <[email protected]> on LMML.

We may end up postponing merging three last patches (those adding controls) until current control values are moved to sub-device (and video device) state. Discussion is needed on the topic.

The compiled documentation can be found here <URL:https://www.retiisi.eu/~sailus/v4l2/tmp/common-raw/output/userspace-api/media/v4l/dev-subdev.html#media-subdev-config-model-common-raw-sensor>.

since RFC v3:

- Fix binning control name in documentation.

- Note V4L2_CID_CONFIG_MODEL is read-only.

- Clarify wording in config model documentation based on Jacopo's comments.

- Clarify post-scaler digital crop behaviour.

since RFC v2:

- Remove the CROP_BOUNDS rectangle on the image data sink pad. It's redundant.

- Remove scaling from the sink compose rectangle, leaving binning and sub-sampling.

- Introduce scaling as well as post-scaler digital crop on source pad (image stream). This is a new patch, preceding control changes.

- Use monospace font for selection targets.

- Improvements in referring to previous configuration steps in text description.

since RFC v1:

- Rework the documentation according to the comments (spelling fixes, alignment mostly).

- Include separate patches for binning and sub-sampling controls.

- Allow binning, scaling and scaling to be configured using the compose rectangle. This will change to just scaling in the three last patches.

Sakari Ailus (9):
media: Documentation: Rework embedded data documentation
media: Documentation: Add a hyphen to list-based
media: Documentation: Reword split of sensor driver to two classes
media: Documentation: Add subdev configuration models, raw sensor
model
media: Documentation: Add scaling and post-scaler crop for common raw
media: uapi: Add V4L2_CID_CONFIG_MODEL control
media: uapi: Add V4L2_CID_BINNING control for binning configuration
media: uapi: Add controls for sub-sampling configuration
media: Documentation: Add binning and sub-sampling controls

 .../media/drivers/camera-sensor.rst           |  53 ++-
 .../media/v4l/common-raw-sensor.dia           | 441 ++++++++++++++++++
 .../media/v4l/common-raw-sensor.svg           | 134 ++++++
 .../userspace-api/media/v4l/dev-subdev.rst    |   2 +
 .../media/v4l/ext-ctrls-camera.rst            |  40 ++
 .../media/v4l/ext-ctrls-image-process.rst     |   4 +
 .../media/v4l/subdev-config-model.rst         | 233 +++++++++
 drivers/media/v4l2-core/v4l2-ctrls-defs.c     |   9 +
 include/uapi/linux/v4l2-controls.h            |   6 +
 9 files changed, 908 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.dia
 create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.svg
 create mode 100644 Documentation/userspace-api/media/v4l/subdev-config-model.rst

base-commit: 251513d49483c066e43c0bacd5650ffe44728584

Signature · 1 line
2.39.5
#1 lore raw

RFC v4 1/9 media: Documentation: Rework embedded data documentation

Rework embedded data documentation by removing the reference to the pixel data stream. The specific documentation of the embedded data interface will be elsewhere, in the near future either CCS or common raw camera sensor model documentation.

---
 .../userspace-api/media/drivers/camera-sensor.rst   | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +6 -7
index dc415b8f6c8e..8e1083417ae1 100644
@@ -111,13 +111,12 @@ the sensor configuration for the captured frame back to the host. While CSI-2 is
 the most common data interface used by such sensors, embedded data can be
 available on other interfaces as well.
 
-Such sensors expose two internal sink pads (pads that have both the
-``MEDIA_PAD_FL_SINK <MEDIA-PAD-FL-SINK>`` and ``MEDIA_PAD_FL_INTERNAL
-<MEDIA-PAD-FL-INTERNAL>`` flags set) to model the source of the image and
-embedded data streams. Both of these pads produces a single stream, and the
-sub-device routes those streams to the external (source) pad. If the sub-device
-driver supports disabling embedded data, this can be done by disabling the
-embedded data route via the ``VIDIOC_SUBDEV_S_ROUTING`` IOCTL.
+Embedded data support is indicated by the precence of an internal sink pad (pad
+that has both the ``MEDIA_PAD_FL_SINK <MEDIA-PAD-FL-SINK>`` and
+``MEDIA_PAD_FL_INTERNAL <MEDIA-PAD-FL-INTERNAL>`` flags set) with a metadata
+format to model the embedded data stream. If the sub-device driver supports
+disabling embedded data, this can be done by disabling the embedded data route
+via the ``VIDIOC_SUBDEV_S_ROUTING`` IOCTL.
 
 In general, changing the embedded data format from the driver-configured values
 is not supported. The height of the metadata is device-specific and the width
Signature · 1 line
2.39.5
Reviewed-by on v4 1/9
#2 lore raw

Re: [RFC v4 1/9] media: Documentation: Rework embedded data documentation

Hi,

Quoted 26 lines · Sakari Ailus

Rework embedded data documentation by removing the reference to the pixel data stream. The specific documentation of the embedded data interface will be elsewhere, in the near future either CCS or common raw camera sensor model documentation.

---
  .../userspace-api/media/drivers/camera-sensor.rst   | 13 ++++++-------
  1 file changed, 6 insertions(+), 7 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +0 -6
index dc415b8f6c8e..8e1083417ae1 100644
@@ -111,13 +111,12 @@ the sensor configuration for the captured frame back to the host. While CSI-2 is
  the most common data interface used by such sensors, embedded data can be
  available on other interfaces as well.
 
-Such sensors expose two internal sink pads (pads that have both the
-``MEDIA_PAD_FL_SINK <MEDIA-PAD-FL-SINK>`` and ``MEDIA_PAD_FL_INTERNAL
-<MEDIA-PAD-FL-INTERNAL>`` flags set) to model the source of the image and
-embedded data streams. Both of these pads produces a single stream, and the
-sub-device routes those streams to the external (source) pad. If the sub-device
-driver supports disabling embedded data, this can be done by disabling the

Documentation/userspace-api/media/drivers/camera-sensor.rst the sensor configuration for the captured frame back to the host. While CSI-2 is · line 122

Quoted 10 lines
Documentation/userspace-api/media/drivers/camera-sensor.rst +6 -1
-embedded data route via the ``VIDIOC_SUBDEV_S_ROUTING`` IOCTL.
+Embedded data support is indicated by the precence of an internal sink pad (pad
+that has both the ``MEDIA_PAD_FL_SINK <MEDIA-PAD-FL-SINK>`` and
+``MEDIA_PAD_FL_INTERNAL <MEDIA-PAD-FL-INTERNAL>`` flags set) with a metadata
+format to model the embedded data stream. If the sub-device driver supports
+disabling embedded data, this can be done by disabling the embedded data route
+via the ``VIDIOC_SUBDEV_S_ROUTING`` IOCTL.
 
  In general, changing the embedded data format from the driver-configured values
  is not supported. The height of the metadata is device-specific and the width

Tomi

#3 lore raw

RFC v4 2/9 media: Documentation: Add a hyphen to list-based

In reply to Sakari Ailus

Add a hyphen to list-based for uniform spelling in camera-sensor.rst.

---
 Documentation/userspace-api/media/drivers/camera-sensor.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +3 -3
index 8e1083417ae1..9a1e8aa9fc77 100644
@@ -26,10 +26,10 @@ of cropping and scaling operations from the device's pixel array's size.
 
 An example of such a driver is the CCS driver.
 
-Register list based drivers
+Register list-based drivers
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Register list based drivers generally, instead of able to configure the device
+Register list-based drivers generally, instead of able to configure the device
 they control based on user requests, are limited to a number of preset
 configurations that combine a number of different parameters that on hardware
 level are independent. How a driver picks such configuration is based on the
@@ -67,7 +67,7 @@ is pixels and the unit of the ``V4L2_CID_VBLANK`` is lines. The pixel rate in
 the sensor's **pixel array** is specified by ``V4L2_CID_PIXEL_RATE`` in the same
 sub-device. The unit of that control is pixels per second.
 
-Register list based drivers need to implement read-only sub-device nodes for the
+Register list-based drivers need to implement read-only sub-device nodes for the
 purpose. Devices that are not register list based need these to configure the
 device's internal processing pipeline.
 
Signature · 1 line
2.39.5
Reviewed-by on v4 2/9
#4 lore raw

Re: [RFC v4 2/9] media: Documentation: Add a hyphen to list-based

Hi,

Quoted 26 lines · Sakari Ailus

Add a hyphen to list-based for uniform spelling in camera-sensor.rst.

---
  Documentation/userspace-api/media/drivers/camera-sensor.rst | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +2 -2
index 8e1083417ae1..9a1e8aa9fc77 100644
@@ -26,10 +26,10 @@ of cropping and scaling operations from the device's pixel array's size.
 
  An example of such a driver is the CCS driver.
 
-Register list based drivers
+Register list-based drivers
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Register list based drivers generally, instead of able to configure the device
+Register list-based drivers generally, instead of able to configure the device
  they control based on user requests, are limited to a number of preset
  configurations that combine a number of different parameters that on hardware
  level are independent. How a driver picks such configuration is based on the

Documentation/userspace-api/media/drivers/camera-sensor.rst is pixels and the unit of the ``V4L2_CID_VBLANK`` is lines. The pixel rate in · line 73

Quoted 8 lines
Documentation/userspace-api/media/drivers/camera-sensor.rst +1 -1
@@ -67,7 +67,7 @@ is pixels and the unit of the ``V4L2_CID_VBLANK`` is lines. The pixel rate in
  the sensor's **pixel array** is specified by ``V4L2_CID_PIXEL_RATE`` in the same
  sub-device. The unit of that control is pixels per second.
 
-Register list based drivers need to implement read-only sub-device nodes for the
+Register list-based drivers need to implement read-only sub-device nodes for the
  purpose. Devices that are not register list based need these to configure the
  device's internal processing pipeline.
 

Tomi

#5 lore raw

RFC v4 3/9 media: Documentation: Reword split of sensor driver to two classes

In reply to Sakari Ailus

The sensor drivers do not configure the output size of the sensors but the entire internal pipeline. Reflect this in the documentation.

---
 .../userspace-api/media/drivers/camera-sensor.rst      | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +6 -4
index 9a1e8aa9fc77..bc55c861fb69 100644
@@ -10,11 +10,13 @@ used to control the camera sensor drivers.
 
 You may also find :ref:`media_writing_camera_sensor_drivers` useful.
 
-Frame size
-----------
+Sensor internal pipeline configuration
+--------------------------------------
 
-There are two distinct ways to configure the frame size produced by camera
-sensors.
+Camera sensors have an internal processing pipeline including cropping and
+binning functionality. The sensor drivers belong to two distinct classes, freely
+configurable and register list-based drivers, depending on how the driver
+configures this functionality.
 
 Freely configurable camera sensor drivers
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.39.5
Reviewed-by on v4 3/9
#6 lore raw

Re: [RFC v4 3/9] media: Documentation: Reword split of sensor driver to two classes

Hi,

Quoted 22 lines · Sakari Ailus

The sensor drivers do not configure the output size of the sensors but the entire internal pipeline. Reflect this in the documentation.

---
  .../userspace-api/media/drivers/camera-sensor.rst      | 10 ++++++----
  1 file changed, 6 insertions(+), 4 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +2 -2
index 9a1e8aa9fc77..bc55c861fb69 100644
@@ -10,11 +10,13 @@ used to control the camera sensor drivers.
 
  You may also find :ref:`media_writing_camera_sensor_drivers` useful.
 
-Frame size
-----------
+Sensor internal pipeline configuration
+--------------------------------------

Documentation/userspace-api/media/drivers/camera-sensor.rst used to control the camera sensor drivers. · line 22

Quoted 10 lines
Documentation/userspace-api/media/drivers/camera-sensor.rst +4 -2
 
-There are two distinct ways to configure the frame size produced by camera
-sensors.
+Camera sensors have an internal processing pipeline including cropping and
+binning functionality. The sensor drivers belong to two distinct classes, freely
+configurable and register list-based drivers, depending on how the driver
+configures this functionality.
 
  Freely configurable camera sensor drivers
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Tomi

#7 lore raw

RFC v4 4/9 media: Documentation: Add subdev configuration models, raw sensor model

In reply to Sakari Ailus

Sub-device configuration models define what V4L2 API elements are available on a compliant sub-device and how do they behave.

The patch also adds a model for common raw sensors.

---
 .../media/drivers/camera-sensor.rst           |   4 +
 .../media/v4l/common-raw-sensor.dia           | 441 ++++++++++++++++++
 .../media/v4l/common-raw-sensor.svg           | 134 ++++++
 .../userspace-api/media/v4l/dev-subdev.rst    |   2 +
 .../media/v4l/subdev-config-model.rst         | 209 +++++++++
 5 files changed, 790 insertions(+)
 create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.dia
 create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.svg
 create mode 100644 Documentation/userspace-api/media/v4l/subdev-config-model.rst
Documentation/userspace-api/media/drivers/camera-sensor.rst +4 -0
index bc55c861fb69..5bc4c79d230c 100644
@@ -18,6 +18,8 @@ binning functionality. The sensor drivers belong to two distinct classes, freely
 configurable and register list-based drivers, depending on how the driver
 configures this functionality.
 
+Also see :ref:`media_subdev_config_model_common_raw_sensor`.
+
 Freely configurable camera sensor drivers
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -105,6 +107,8 @@ values programmed by the register sequences. The default values of these
 controls shall be 0 (disabled). Especially these controls shall not be inverted,
 independently of the sensor's mounting rotation.
 
+.. _media_using_camera_sensor_drivers_embedded_data:
+
 Embedded data
 -------------
 
Documentation/userspace-api/media/v4l/common-raw-sensor.dia new file +441 -0

441 lines not on this page · raw message

Documentation/userspace-api/media/v4l/common-raw-sensor.svg new file +134 -0

134 lines not on this page · raw message

Documentation/userspace-api/media/v4l/dev-subdev.rst +2 -0
index dcfcbd52490d..4d145bd3bd09 100644
@@ -838,3 +838,5 @@ stream while it may be possible to enable and disable the embedded data stream.
 
 The embedded data format does not need to be configured on the sensor's pads as
 the format is dictated by the pixel data format in this case.
+
+.. include:: subdev-config-model.rst
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +209 -0

209 lines not on this page · raw message

Signature · 1 line
2.39.5
Reviewed-by on v4 4/9
#8 lore raw

Re: [RFC v4 4/9] media: Documentation: Add subdev configuration models, raw sensor model

Hi,

Quoted 616 lines · Sakari Ailus

Sub-device configuration models define what V4L2 API elements are available on a compliant sub-device and how do they behave.

The patch also adds a model for common raw sensors.

---
  .../media/drivers/camera-sensor.rst           |   4 +
  .../media/v4l/common-raw-sensor.dia           | 441 ++++++++++++++++++
  .../media/v4l/common-raw-sensor.svg           | 134 ++++++
  .../userspace-api/media/v4l/dev-subdev.rst    |   2 +
  .../media/v4l/subdev-config-model.rst         | 209 +++++++++
  5 files changed, 790 insertions(+)

create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.dia create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.svg create mode 100644 Documentation/userspace-api/media/v4l/subdev-config-model.rst

Documentation/userspace-api/media/drivers/camera-sensor.rst +4 -0
index bc55c861fb69..5bc4c79d230c 100644
@@ -18,6 +18,8 @@ binning functionality. The sensor drivers belong to two distinct classes, freely
  configurable and register list-based drivers, depending on how the driver
  configures this functionality.
 
+Also see :ref:`media_subdev_config_model_common_raw_sensor`.
+
  Freely configurable camera sensor drivers
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -105,6 +107,8 @@ values programmed by the register sequences. The default values of these
  controls shall be 0 (disabled). Especially these controls shall not be inverted,
  independently of the sensor's mounting rotation.
 
+.. _media_using_camera_sensor_drivers_embedded_data:
+
  Embedded data
  -------------
 
Documentation/userspace-api/media/v4l/common-raw-sensor.dia new file +441 -0
new file mode 100644
index 000000000000..aa927527eae3
@@ -0,0 +1,441 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/">
+  <dia:diagramdata>
+    <dia:attribute name="background">
+      <dia:color val="#ffffffff"/>
+    </dia:attribute>
+    <dia:attribute name="pagebreak">
+      <dia:color val="#000099ff"/>
+    </dia:attribute>
+    <dia:attribute name="paper">
+      <dia:composite type="paper">
+        <dia:attribute name="name">
+          <dia:string>#A4#</dia:string>
+        </dia:attribute>
+        <dia:attribute name="tmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="bmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="lmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="rmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="is_portrait">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="scaling">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="fitto">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="grid">
+      <dia:composite type="grid">
+        <dia:attribute name="dynamic">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="width_x">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="width_y">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_x">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_y">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:composite type="color"/>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="color">
+      <dia:color val="#d8e5e5ff"/>
+    </dia:attribute>
+    <dia:attribute name="guides"/>
+    <dia:attribute name="guide_color">
+      <dia:color val="#00ff00ff"/>
+    </dia:attribute>
+    <dia:attribute name="display">
+      <dia:composite type="display">
+        <dia:attribute name="antialiased">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="snap-to-grid">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+        <dia:attribute name="snap-to-guides">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="snap-to-object">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="show-grid">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="show-guides">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="show-connection-points">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+      </dia:composite>
+    </dia:attribute>
+  </dia:diagramdata>
+  <dia:layer name="Background" visible="true" connectable="false"/>
+  <dia:layer name="Background" visible="true" connectable="false"/>
+  <dia:layer name="Background" visible="true" connectable="true" active="true">
+    <dia:object type="Standard - Box" version="0" id="O0">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.35,11.5"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="16.3,11.45;25.8,18.45"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="16.35,11.5"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="9.4000000000000021"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="6.9000000000000021"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O1">
+      <dia:attribute name="obj_pos">
+        <dia:point val="25.5627,14.578"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.4627,14.478;26.0191,15.0344"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="25.5627,14.578"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.35638032780853468"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.35638032780853468"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000ff"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O2">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.7702,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.6702,13.1656;18.24,13.7354"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="17.7702,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000ff"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O3">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.7464,16.2056"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.6464,16.1056;18.2162,16.6754"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="17.7464,16.2056"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000ff"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O4">
+      <dia:attribute name="obj_pos">
+        <dia:point val="18.1609,16.3413"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="18.1016,14.5712;25.6221,16.4007"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="18.1609,16.3413"/>
+        <dia:point val="25.5627,14.7562"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O3" connection="8"/>
+        <dia:connection handle="1" to="O1" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O5">
+      <dia:attribute name="obj_pos">
+        <dia:point val="18.14,13.4505"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="18.0821,13.3926;25.6206,14.9674"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="18.14,13.4505"/>
+        <dia:point val="25.5627,14.7562"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O2" connection="3"/>
+        <dia:connection handle="1" to="O1" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O6">
+      <dia:attribute name="obj_pos">
+        <dia:point val="25.919,14.7562"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.8686,14.3879;31.0068,15.0497"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="25.919,14.7562"/>
+        <dia:point val="30.9564,14.7131"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O1" connection="3"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O7">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.9551,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.9551,12.5181;22.7051,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#image data (1)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="17.9551,13.1131"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O2" connection="1"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O8">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.9313,16.5754"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.9313,16.5754;24.1238,17.3229"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#embedded data (2)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="17.9313,17.1704"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="0"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O3" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O9">
+      <dia:attribute name="obj_pos">
+        <dia:point val="26.1,14.125"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="26.1,13.53;30.7475,14.2775"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#source pad (0)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="26.1,14.125"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+  </dia:layer>
+</dia:diagram>
Documentation/userspace-api/media/v4l/common-raw-sensor.svg new file +124 -0
new file mode 100644
index 000000000000..1d6055da2519
@@ -0,0 +1,134 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="296pt" height="142pt" viewBox="0 0 296 142" version="1.1">
+<defs>
+<g>
+<symbol overflow="visible" id="glyph0-0">
+<path style="stroke:none;" d="M 0.640625 2.265625 L 0.640625 -9.015625 L 7.03125 -9.015625 L 7.03125 2.265625 Z M 1.359375 1.546875 L 6.328125 1.546875 L 6.328125 -8.296875 L 1.359375 -8.296875 Z M 1.359375 1.546875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-1">
+<path style="stroke:none;" d="M 1.203125 -7 L 2.359375 -7 L 2.359375 0 L 1.203125 0 Z M 1.203125 -9.71875 L 2.359375 -9.71875 L 2.359375 -8.265625 L 1.203125 -8.265625 Z M 1.203125 -9.71875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-2">
+<path style="stroke:none;" d="M 6.65625 -5.65625 C 6.9375 -6.164062 7.273438 -6.546875 7.671875 -6.796875 C 8.078125 -7.046875 8.550781 -7.171875 9.09375 -7.171875 C 9.820312 -7.171875 10.382812 -6.914062 10.78125 -6.40625 C 11.175781 -5.894531 11.375 -5.164062 11.375 -4.21875 L 11.375 0 L 10.21875 0 L 10.21875 -4.1875 C 10.21875 -4.851562 10.097656 -5.347656 9.859375 -5.671875 C 9.628906 -6.003906 9.269531 -6.171875 8.78125 -6.171875 C 8.1875 -6.171875 7.710938 -5.972656 7.359375 -5.578125 C 7.015625 -5.179688 6.84375 -4.640625 6.84375 -3.953125 L 6.84375 0 L 5.6875 0 L 5.6875 -4.1875 C 5.6875 -4.863281 5.566406 -5.363281 5.328125 -5.6875 C 5.097656 -6.007812 4.734375 -6.171875 4.234375 -6.171875 C 3.648438 -6.171875 3.179688 -5.96875 2.828125 -5.5625 C 2.484375 -5.164062 2.3125 -4.628906 2.3125 -3.953125 L 2.3125 0 L 1.15625 0 L 1.15625 -7 L 2.3125 -7 L 2.3125 -5.90625 C 2.582031 -6.332031 2.898438 -6.648438 3.265625 -6.859375 C 3.628906 -7.066406 4.0625 -7.171875 4.5625 -7.171875 C 5.070312 -7.171875 5.503906 -7.039062 5.859375 -6.78125 C 6.222656 -6.519531 6.488281 -6.144531 6.65625 -5.65625 Z M 6.65625 -5.65625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-3">
+<path style="stroke:none;" d="M 4.390625 -3.515625 C 3.460938 -3.515625 2.816406 -3.40625 2.453125 -3.1875 C 2.097656 -2.976562 1.921875 -2.617188 1.921875 -2.109375 C 1.921875 -1.703125 2.050781 -1.378906 2.3125 -1.140625 C 2.582031 -0.898438 2.953125 -0.78125 3.421875 -0.78125 C 4.054688 -0.78125 4.566406 -1.003906 4.953125 -1.453125 C 5.335938 -1.910156 5.53125 -2.515625 5.53125 -3.265625 L 5.53125 -3.515625 Z M 6.671875 -4 L 6.671875 0 L 5.53125 0 L 5.53125 -1.0625 C 5.269531 -0.632812 4.941406 -0.316406 4.546875 -0.109375 C 4.160156 0.0859375 3.679688 0.1875 3.109375 0.1875 C 2.390625 0.1875 1.816406 -0.015625 1.390625 -0.421875 C 0.972656 -0.828125 0.765625 -1.363281 0.765625 -2.03125 C 0.765625 -2.820312 1.023438 -3.414062 1.546875 -3.8125 C 2.078125 -4.21875 2.867188 -4.421875 3.921875 -4.421875 L 5.53125 -4.421875 L 5.53125 -4.53125 C 5.53125 -5.0625 5.351562 -5.46875 5 -5.75 C 4.65625 -6.039062 4.171875 -6.1875 3.546875 -6.1875 C 3.140625 -6.1875 2.75 -6.140625 2.375 -6.046875 C 2 -5.953125 1.632812 -5.8125 1.28125 -5.625 L 1.28125 -6.671875 C 1.695312 -6.835938 2.101562 -6.960938 2.5 -7.046875 C 2.894531 -7.128906 3.28125 -7.171875 3.65625 -7.171875 C 4.675781 -7.171875 5.429688 -6.90625 5.921875 -6.375 C 6.421875 -5.851562 6.671875 -5.0625 6.671875 -4 Z M 6.671875 -4 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-4">
+<path style="stroke:none;" d="M 5.8125 -3.578125 C 5.8125 -4.410156 5.640625 -5.054688 5.296875 -5.515625 C 4.953125 -5.972656 4.46875 -6.203125 3.84375 -6.203125 C 3.226562 -6.203125 2.75 -5.972656 2.40625 -5.515625 C 2.0625 -5.054688 1.890625 -4.410156 1.890625 -3.578125 C 1.890625 -2.753906 2.0625 -2.113281 2.40625 -1.65625 C 2.75 -1.195312 3.226562 -0.96875 3.84375 -0.96875 C 4.46875 -0.96875 4.953125 -1.195312 5.296875 -1.65625 C 5.640625 -2.113281 5.8125 -2.753906 5.8125 -3.578125 Z M 6.953125 -0.875 C 6.953125 0.320312 6.6875 1.207031 6.15625 1.78125 C 5.632812 2.363281 4.828125 2.65625 3.734375 2.65625 C 3.328125 2.65625 2.945312 2.625 2.59375 2.5625 C 2.238281 2.507812 1.890625 2.421875 1.546875 2.296875 L 1.546875 1.171875 C 1.890625 1.359375 2.222656 1.492188 2.546875 1.578125 C 2.878906 1.671875 3.21875 1.71875 3.5625 1.71875 C 4.3125 1.71875 4.875 1.519531 5.25 1.125 C 5.625 0.726562 5.8125 0.132812 5.8125 -0.65625 L 5.8125 -1.234375 C 5.570312 -0.816406 5.265625 -0.503906 4.890625 -0.296875 C 4.523438 -0.0976562 4.082031 0 3.5625 0 C 2.707031 0 2.015625 -0.328125 1.484375 -0.984375 C 0.960938 -1.640625 0.703125 -2.503906 0.703125 -3.578125 C 0.703125 -4.660156 0.960938 -5.53125 1.484375 -6.1875 C 2.015625 -6.84375 2.707031 -7.171875 3.5625 -7.171875 C 4.082031 -7.171875 4.523438 -7.066406 4.890625 -6.859375 C 5.265625 -6.648438 5.570312 -6.34375 5.8125 -5.9375 L 5.8125 -7 L 6.953125 -7 Z M 6.953125 -0.875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-5">
+<path style="stroke:none;" d="M 7.1875 -3.78125 L 7.1875 -3.21875 L 1.90625 -3.21875 C 1.957031 -2.425781 2.195312 -1.820312 2.625 -1.40625 C 3.050781 -1 3.644531 -0.796875 4.40625 -0.796875 C 4.84375 -0.796875 5.269531 -0.847656 5.6875 -0.953125 C 6.101562 -1.066406 6.515625 -1.226562 6.921875 -1.4375 L 6.921875 -0.359375 C 6.515625 -0.179688 6.09375 -0.046875 5.65625 0.046875 C 5.21875 0.140625 4.78125 0.1875 4.34375 0.1875 C 3.21875 0.1875 2.328125 -0.132812 1.671875 -0.78125 C 1.023438 -1.4375 0.703125 -2.320312 0.703125 -3.4375 C 0.703125 -4.582031 1.007812 -5.488281 1.625 -6.15625 C 2.25 -6.832031 3.085938 -7.171875 4.140625 -7.171875 C 5.078125 -7.171875 5.816406 -6.863281 6.359375 -6.25 C 6.910156 -5.644531 7.1875 -4.820312 7.1875 -3.78125 Z M 6.046875 -4.125 C 6.035156 -4.75 5.859375 -5.25 5.515625 -5.625 C 5.171875 -6 4.71875 -6.1875 4.15625 -6.1875 C 3.507812 -6.1875 2.992188 -6.003906 2.609375 -5.640625 C 2.222656 -5.285156 2 -4.78125 1.9375 -4.125 Z M 6.046875 -4.125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-6">
+<path style="stroke:none;" d=""/>
+</symbol>
+<symbol overflow="visible" id="glyph0-7">
+<path style="stroke:none;" d="M 5.8125 -5.9375 L 5.8125 -9.71875 L 6.953125 -9.71875 L 6.953125 0 L 5.8125 0 L 5.8125 -1.046875 C 5.570312 -0.628906 5.265625 -0.316406 4.890625 -0.109375 C 4.523438 0.0859375 4.082031 0.1875 3.5625 0.1875 C 2.71875 0.1875 2.03125 -0.148438 1.5 -0.828125 C 0.96875 -1.503906 0.703125 -2.394531 0.703125 -3.5 C 0.703125 -4.59375 0.96875 -5.476562 1.5 -6.15625 C 2.03125 -6.832031 2.71875 -7.171875 3.5625 -7.171875 C 4.082031 -7.171875 4.523438 -7.066406 4.890625 -6.859375 C 5.265625 -6.660156 5.570312 -6.351562 5.8125 -5.9375 Z M 1.890625 -3.5 C 1.890625 -2.644531 2.0625 -1.976562 2.40625 -1.5 C 2.757812 -1.019531 3.238281 -0.78125 3.84375 -0.78125 C 4.457031 -0.78125 4.9375 -1.019531 5.28125 -1.5 C 5.632812 -1.976562 5.8125 -2.644531 5.8125 -3.5 C 5.8125 -4.34375 5.632812 -5.003906 5.28125 -5.484375 C 4.9375 -5.960938 4.457031 -6.203125 3.84375 -6.203125 C 3.238281 -6.203125 2.757812 -5.960938 2.40625 -5.484375 C 2.0625 -5.003906 1.890625 -4.34375 1.890625 -3.5 Z M 1.890625 -3.5 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-8">
+<path style="stroke:none;" d="M 2.34375 -8.984375 L 2.34375 -7 L 4.71875 -7 L 4.71875 -6.109375 L 2.34375 -6.109375 L 2.34375 -2.3125 C 2.34375 -1.738281 2.421875 -1.367188 2.578125 -1.203125 C 2.734375 -1.046875 3.050781 -0.96875 3.53125 -0.96875 L 4.71875 -0.96875 L 4.71875 0 L 3.53125 0 C 2.644531 0 2.03125 -0.164062 1.6875 -0.5 C 1.351562 -0.832031 1.1875 -1.4375 1.1875 -2.3125 L 1.1875 -6.109375 L 0.34375 -6.109375 L 0.34375 -7 L 1.1875 -7 L 1.1875 -8.984375 Z M 2.34375 -8.984375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-9">
+<path style="stroke:none;" d="M 3.96875 -9.703125 C 3.40625 -8.742188 2.988281 -7.796875 2.71875 -6.859375 C 2.445312 -5.929688 2.3125 -4.984375 2.3125 -4.015625 C 2.3125 -3.054688 2.445312 -2.101562 2.71875 -1.15625 C 3 -0.21875 3.414062 0.726562 3.96875 1.6875 L 2.96875 1.6875 C 2.34375 0.707031 1.875 -0.253906 1.5625 -1.203125 C 1.25 -2.148438 1.09375 -3.085938 1.09375 -4.015625 C 1.09375 -4.941406 1.25 -5.875 1.5625 -6.8125 C 1.875 -7.757812 2.34375 -8.722656 2.96875 -9.703125 Z M 3.96875 -9.703125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-10">
+<path style="stroke:none;" d="M 1.59375 -1.0625 L 3.65625 -1.0625 L 3.65625 -8.171875 L 1.40625 -7.734375 L 1.40625 -8.875 L 3.640625 -9.328125 L 4.90625 -9.328125 L 4.90625 -1.0625 L 6.953125 -1.0625 L 6.953125 0 L 1.59375 0 Z M 1.59375 -1.0625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-11">
+<path style="stroke:none;" d="M 1.03125 -9.703125 L 2.03125 -9.703125 C 2.65625 -8.722656 3.117188 -7.757812 3.421875 -6.8125 C 3.734375 -5.875 3.890625 -4.941406 3.890625 -4.015625 C 3.890625 -3.085938 3.734375 -2.148438 3.421875 -1.203125 C 3.117188 -0.253906 2.65625 0.707031 2.03125 1.6875 L 1.03125 1.6875 C 1.582031 0.726562 1.992188 -0.21875 2.265625 -1.15625 C 2.535156 -2.101562 2.671875 -3.054688 2.671875 -4.015625 C 2.671875 -4.984375 2.535156 -5.929688 2.265625 -6.859375 C 1.992188 -7.796875 1.582031 -8.742188 1.03125 -9.703125 Z M 1.03125 -9.703125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-12">
+<path style="stroke:none;" d="M 6.234375 -3.5 C 6.234375 -4.34375 6.054688 -5.003906 5.703125 -5.484375 C 5.359375 -5.960938 4.882812 -6.203125 4.28125 -6.203125 C 3.664062 -6.203125 3.179688 -5.960938 2.828125 -5.484375 C 2.484375 -5.003906 2.3125 -4.34375 2.3125 -3.5 C 2.3125 -2.644531 2.484375 -1.976562 2.828125 -1.5 C 3.179688 -1.019531 3.664062 -0.78125 4.28125 -0.78125 C 4.882812 -0.78125 5.359375 -1.019531 5.703125 -1.5 C 6.054688 -1.976562 6.234375 -2.644531 6.234375 -3.5 Z M 2.3125 -5.9375 C 2.5625 -6.351562 2.867188 -6.660156 3.234375 -6.859375 C 3.597656 -7.066406 4.039062 -7.171875 4.5625 -7.171875 C 5.40625 -7.171875 6.09375 -6.832031 6.625 -6.15625 C 7.15625 -5.476562 7.421875 -4.59375 7.421875 -3.5 C 7.421875 -2.394531 7.15625 -1.503906 6.625 -0.828125 C 6.09375 -0.148438 5.40625 0.1875 4.5625 0.1875 C 4.039062 0.1875 3.597656 0.0859375 3.234375 -0.109375 C 2.867188 -0.316406 2.5625 -0.628906 2.3125 -1.046875 L 2.3125 0 L 1.15625 0 L 1.15625 -9.71875 L 2.3125 -9.71875 Z M 2.3125 -5.9375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-13">
+<path style="stroke:none;" d="M 2.453125 -1.0625 L 6.859375 -1.0625 L 6.859375 0 L 0.9375 0 L 0.9375 -1.0625 C 1.414062 -1.5625 2.066406 -2.226562 2.890625 -3.0625 C 3.722656 -3.894531 4.242188 -4.429688 4.453125 -4.671875 C 4.859375 -5.128906 5.140625 -5.515625 5.296875 -5.828125 C 5.460938 -6.140625 5.546875 -6.445312 5.546875 -6.75 C 5.546875 -7.25 5.367188 -7.65625 5.015625 -7.96875 C 4.671875 -8.28125 4.21875 -8.4375 3.65625 -8.4375 C 3.257812 -8.4375 2.84375 -8.363281 2.40625 -8.21875 C 1.96875 -8.082031 1.5 -7.878906 1 -7.609375 L 1 -8.875 C 1.507812 -9.082031 1.984375 -9.238281 2.421875 -9.34375 C 2.867188 -9.445312 3.273438 -9.5 3.640625 -9.5 C 4.609375 -9.5 5.378906 -9.253906 5.953125 -8.765625 C 6.523438 -8.285156 6.8125 -7.640625 6.8125 -6.828125 C 6.8125 -6.453125 6.738281 -6.09375 6.59375 -5.75 C 6.445312 -5.40625 6.1875 -5 5.8125 -4.53125 C 5.707031 -4.40625 5.375 -4.054688 4.8125 -3.484375 C 4.257812 -2.910156 3.472656 -2.101562 2.453125 -1.0625 Z M 2.453125 -1.0625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-14">
+<path style="stroke:none;" d="M 5.671875 -6.796875 L 5.671875 -5.703125 C 5.347656 -5.867188 5.007812 -5.992188 4.65625 -6.078125 C 4.300781 -6.160156 3.9375 -6.203125 3.5625 -6.203125 C 3 -6.203125 2.570312 -6.113281 2.28125 -5.9375 C 2 -5.769531 1.859375 -5.507812 1.859375 -5.15625 C 1.859375 -4.882812 1.957031 -4.671875 2.15625 -4.515625 C 2.363281 -4.367188 2.773438 -4.226562 3.390625 -4.09375 L 3.78125 -4 C 4.601562 -3.832031 5.1875 -3.585938 5.53125 -3.265625 C 5.875 -2.941406 6.046875 -2.5 6.046875 -1.9375 C 6.046875 -1.28125 5.785156 -0.757812 5.265625 -0.375 C 4.753906 0 4.050781 0.1875 3.15625 0.1875 C 2.78125 0.1875 2.390625 0.148438 1.984375 0.078125 C 1.578125 0.00390625 1.144531 -0.101562 0.6875 -0.25 L 0.6875 -1.4375 C 1.113281 -1.21875 1.53125 -1.050781 1.9375 -0.9375 C 2.351562 -0.832031 2.765625 -0.78125 3.171875 -0.78125 C 3.710938 -0.78125 4.128906 -0.875 4.421875 -1.0625 C 4.710938 -1.25 4.859375 -1.507812 4.859375 -1.84375 C 4.859375 -2.15625 4.753906 -2.394531 4.546875 -2.5625 C 4.335938 -2.726562 3.875 -2.890625 3.15625 -3.046875 L 2.765625 -3.140625 C 2.046875 -3.285156 1.53125 -3.515625 1.21875 -3.828125 C 0.90625 -4.140625 0.75 -4.566406 0.75 -5.109375 C 0.75 -5.765625 0.976562 -6.269531 1.4375 -6.625 C 1.90625 -6.988281 2.570312 -7.171875 3.4375 -7.171875 C 3.851562 -7.171875 4.25 -7.140625 4.625 -7.078125 C 5 -7.015625 5.347656 -6.921875 5.671875 -6.796875 Z M 5.671875 -6.796875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-15">
+<path style="stroke:none;" d="M 3.921875 -6.1875 C 3.304688 -6.1875 2.816406 -5.945312 2.453125 -5.46875 C 2.097656 -4.988281 1.921875 -4.332031 1.921875 -3.5 C 1.921875 -2.65625 2.097656 -1.992188 2.453125 -1.515625 C 2.804688 -1.035156 3.296875 -0.796875 3.921875 -0.796875 C 4.535156 -0.796875 5.019531 -1.035156 5.375 -1.515625 C 5.726562 -2.003906 5.90625 -2.664062 5.90625 -3.5 C 5.90625 -4.320312 5.726562 -4.972656 5.375 -5.453125 C 5.019531 -5.941406 4.535156 -6.1875 3.921875 -6.1875 Z M 3.921875 -7.171875 C 4.921875 -7.171875 5.703125 -6.84375 6.265625 -6.1875 C 6.835938 -5.539062 7.125 -4.644531 7.125 -3.5 C 7.125 -2.351562 6.835938 -1.453125 6.265625 -0.796875 C 5.703125 -0.140625 4.921875 0.1875 3.921875 0.1875 C 2.910156 0.1875 2.117188 -0.140625 1.546875 -0.796875 C 0.984375 -1.453125 0.703125 -2.351562 0.703125 -3.5 C 0.703125 -4.644531 0.984375 -5.539062 1.546875 -6.1875 C 2.117188 -6.84375 2.910156 -7.171875 3.921875 -7.171875 Z M 3.921875 -7.171875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-16">
+<path style="stroke:none;" d="M 1.09375 -2.765625 L 1.09375 -7 L 2.234375 -7 L 2.234375 -2.8125 C 2.234375 -2.144531 2.363281 -1.644531 2.625 -1.3125 C 2.882812 -0.976562 3.269531 -0.8125 3.78125 -0.8125 C 4.40625 -0.8125 4.894531 -1.007812 5.25 -1.40625 C 5.613281 -1.800781 5.796875 -2.34375 5.796875 -3.03125 L 5.796875 -7 L 6.953125 -7 L 6.953125 0 L 5.796875 0 L 5.796875 -1.078125 C 5.515625 -0.648438 5.191406 -0.332031 4.828125 -0.125 C 4.460938 0.0820312 4.035156 0.1875 3.546875 0.1875 C 2.742188 0.1875 2.132812 -0.0625 1.71875 -0.5625 C 1.300781 -1.0625 1.09375 -1.796875 1.09375 -2.765625 Z M 3.984375 -7.171875 Z M 3.984375 -7.171875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-17">
+<path style="stroke:none;" d="M 5.265625 -5.921875 C 5.128906 -5.992188 4.984375 -6.046875 4.828125 -6.078125 C 4.679688 -6.117188 4.519531 -6.140625 4.34375 -6.140625 C 3.6875 -6.140625 3.179688 -5.925781 2.828125 -5.5 C 2.484375 -5.082031 2.3125 -4.476562 2.3125 -3.6875 L 2.3125 0 L 1.15625 0 L 1.15625 -7 L 2.3125 -7 L 2.3125 -5.90625 C 2.5625 -6.332031 2.878906 -6.648438 3.265625 -6.859375 C 3.648438 -7.066406 4.117188 -7.171875 4.671875 -7.171875 C 4.753906 -7.171875 4.84375 -7.164062 4.9375 -7.15625 C 5.03125 -7.144531 5.132812 -7.128906 5.25 -7.109375 Z M 5.265625 -5.921875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-18">
+<path style="stroke:none;" d="M 6.25 -6.734375 L 6.25 -5.65625 C 5.914062 -5.832031 5.585938 -5.960938 5.265625 -6.046875 C 4.941406 -6.140625 4.613281 -6.1875 4.28125 -6.1875 C 3.53125 -6.1875 2.945312 -5.953125 2.53125 -5.484375 C 2.125 -5.015625 1.921875 -4.351562 1.921875 -3.5 C 1.921875 -2.644531 2.125 -1.976562 2.53125 -1.5 C 2.945312 -1.03125 3.53125 -0.796875 4.28125 -0.796875 C 4.613281 -0.796875 4.941406 -0.835938 5.265625 -0.921875 C 5.585938 -1.015625 5.914062 -1.148438 6.25 -1.328125 L 6.25 -0.265625 C 5.925781 -0.117188 5.59375 -0.0078125 5.25 0.0625 C 4.90625 0.144531 4.539062 0.1875 4.15625 0.1875 C 3.09375 0.1875 2.25 -0.144531 1.625 -0.8125 C 1.007812 -1.476562 0.703125 -2.375 0.703125 -3.5 C 0.703125 -4.632812 1.015625 -5.53125 1.640625 -6.1875 C 2.273438 -6.84375 3.132812 -7.171875 4.21875 -7.171875 C 4.570312 -7.171875 4.914062 -7.132812 5.25 -7.0625 C 5.59375 -6.988281 5.925781 -6.878906 6.25 -6.734375 Z M 6.25 -6.734375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-19">
+<path style="stroke:none;" d="M 2.3125 -1.046875 L 2.3125 2.65625 L 1.15625 2.65625 L 1.15625 -7 L 2.3125 -7 L 2.3125 -5.9375 C 2.5625 -6.351562 2.867188 -6.660156 3.234375 -6.859375 C 3.597656 -7.066406 4.039062 -7.171875 4.5625 -7.171875 C 5.40625 -7.171875 6.09375 -6.832031 6.625 -6.15625 C 7.15625 -5.476562 7.421875 -4.59375 7.421875 -3.5 C 7.421875 -2.394531 7.15625 -1.503906 6.625 -0.828125 C 6.09375 -0.148438 5.40625 0.1875 4.5625 0.1875 C 4.039062 0.1875 3.597656 0.0859375 3.234375 -0.109375 C 2.867188 -0.316406 2.5625 -0.628906 2.3125 -1.046875 Z M 6.234375 -3.5 C 6.234375 -4.34375 6.054688 -5.003906 5.703125 -5.484375 C 5.359375 -5.960938 4.882812 -6.203125 4.28125 -6.203125 C 3.664062 -6.203125 3.179688 -5.960938 2.828125 -5.484375 C 2.484375 -5.003906 2.3125 -4.34375 2.3125 -3.5 C 2.3125 -2.644531 2.484375 -1.976562 2.828125 -1.5 C 3.179688 -1.019531 3.664062 -0.78125 4.28125 -0.78125 C 4.882812 -0.78125 5.359375 -1.019531 5.703125 -1.5 C 6.054688 -1.976562 6.234375 -2.644531 6.234375 -3.5 Z M 6.234375 -3.5 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-20">
+<path style="stroke:none;" d="M 4.0625 -8.5 C 3.414062 -8.5 2.925781 -8.175781 2.59375 -7.53125 C 2.269531 -6.894531 2.109375 -5.9375 2.109375 -4.65625 C 2.109375 -3.375 2.269531 -2.410156 2.59375 -1.765625 C 2.925781 -1.128906 3.414062 -0.8125 4.0625 -0.8125 C 4.71875 -0.8125 5.207031 -1.128906 5.53125 -1.765625 C 5.863281 -2.410156 6.03125 -3.375 6.03125 -4.65625 C 6.03125 -5.9375 5.863281 -6.894531 5.53125 -7.53125 C 5.207031 -8.175781 4.71875 -8.5 4.0625 -8.5 Z M 4.0625 -9.5 C 5.113281 -9.5 5.914062 -9.082031 6.46875 -8.25 C 7.019531 -7.425781 7.296875 -6.226562 7.296875 -4.65625 C 7.296875 -3.082031 7.019531 -1.878906 6.46875 -1.046875 C 5.914062 -0.222656 5.113281 0.1875 4.0625 0.1875 C 3.019531 0.1875 2.222656 -0.222656 1.671875 -1.046875 C 1.117188 -1.878906 0.84375 -3.082031 0.84375 -4.65625 C 0.84375 -6.226562 1.117188 -7.425781 1.671875 -8.25 C 2.222656 -9.082031 3.019531 -9.5 4.0625 -9.5 Z M 4.0625 -9.5 "/>
+</symbol>
+</g>
+</defs>
+<g id="surface11910">
+<rect x="0" y="0" width="296" height="142" style="fill:rgb(100%,100%,100%);fill-opacity:1;stroke:none;"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 16.35 11.5 L 25.75 11.5 L 25.75 18.4 L 16.35 18.4 Z M 16.35 11.5 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 25.919141 14.75625 C 25.919141 14.99375 25.562695 14.99375 25.562695 14.75625 C 25.562695 14.518555 25.919141 14.518555 25.919141 14.75625 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 18.140039 13.450586 C 18.140039 13.69707 17.770117 13.69707 17.770117 13.450586 C 17.770117 13.203906 18.140039 13.203906 18.140039 13.450586 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 18.116211 16.39043 C 18.116211 16.637109 17.746484 16.637109 17.746484 16.39043 C 17.746484 16.143945 18.116211 16.143945 18.116211 16.39043 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-dasharray:1,1;stroke-miterlimit:10;" d="M 18.160937 16.341406 L 25.344141 14.80293 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 25.016797 15.128711 L 25.45332 14.779687 L 24.912109 14.639844 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 18.140039 13.450586 L 25.342383 14.717383 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 24.916797 14.896484 L 25.452539 14.736914 L 25.003516 14.403906 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 25.918945 14.75625 L 30.732813 14.715039 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 30.34668 14.968359 L 30.844531 14.714062 L 30.342383 14.468359 " transform="matrix(20,0,0,20,-325,-228)"/>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-1" x="34.101562" y="34.267687"/>
+  <use xlink:href="#glyph0-2" x="37.712674" y="34.267687"/>
+  <use xlink:href="#glyph0-3" x="50.212674" y="34.267687"/>
+  <use xlink:href="#glyph0-4" x="57.990451" y="34.267687"/>
+  <use xlink:href="#glyph0-5" x="66.046007" y="34.267687"/>
+  <use xlink:href="#glyph0-6" x="73.823785" y="34.267687"/>
+  <use xlink:href="#glyph0-7" x="77.990451" y="34.267687"/>
+  <use xlink:href="#glyph0-3" x="86.046007" y="34.267687"/>
+  <use xlink:href="#glyph0-8" x="93.823785" y="34.267687"/>
+  <use xlink:href="#glyph0-3" x="98.823785" y="34.267687"/>
+  <use xlink:href="#glyph0-6" x="106.601562" y="34.267687"/>
+  <use xlink:href="#glyph0-9" x="110.768229" y="34.267687"/>
+  <use xlink:href="#glyph0-10" x="115.768229" y="34.267687"/>
+  <use xlink:href="#glyph0-11" x="123.823785" y="34.267687"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-5" x="33.625" y="115.412218"/>
+  <use xlink:href="#glyph0-2" x="41.402778" y="115.412218"/>
+  <use xlink:href="#glyph0-12" x="53.902778" y="115.412218"/>
+  <use xlink:href="#glyph0-5" x="61.958333" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="69.736111" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="77.791667" y="115.412218"/>
+  <use xlink:href="#glyph0-5" x="85.847222" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="93.625" y="115.412218"/>
+  <use xlink:href="#glyph0-6" x="101.680556" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="105.847222" y="115.412218"/>
+  <use xlink:href="#glyph0-3" x="113.902778" y="115.412218"/>
+  <use xlink:href="#glyph0-8" x="121.680556" y="115.412218"/>
+  <use xlink:href="#glyph0-3" x="126.680556" y="115.412218"/>
+  <use xlink:href="#glyph0-6" x="134.458333" y="115.412218"/>
+  <use xlink:href="#glyph0-9" x="138.625" y="115.412218"/>
+  <use xlink:href="#glyph0-13" x="143.625" y="115.412218"/>
+  <use xlink:href="#glyph0-11" x="151.680556" y="115.412218"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-14" x="197" y="54.505968"/>
+  <use xlink:href="#glyph0-15" x="203.666667" y="54.505968"/>
+  <use xlink:href="#glyph0-16" x="211.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-17" x="219.5" y="54.505968"/>
+  <use xlink:href="#glyph0-18" x="224.5" y="54.505968"/>
+  <use xlink:href="#glyph0-5" x="231.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-6" x="239.222222" y="54.505968"/>

Documentation/userspace-api/media/v4l/common-raw-sensor.svg line 134

Quoted 10 lines
Documentation/userspace-api/media/v4l/common-raw-sensor.svg new file +10 -0
+  <use xlink:href="#glyph0-19" x="243.388889" y="54.505968"/>
+  <use xlink:href="#glyph0-3" x="251.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-7" x="259.222222" y="54.505968"/>
+  <use xlink:href="#glyph0-6" x="267.277778" y="54.505968"/>
+  <use xlink:href="#glyph0-9" x="271.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-20" x="276.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-11" x="284.5" y="54.505968"/>
+</g>
+</g>
+</svg>

That's a lot of text for a simple picture =).

Quoted 79 lines
Documentation/userspace-api/media/v4l/dev-subdev.rst +2 -0
index dcfcbd52490d..4d145bd3bd09 100644
@@ -838,3 +838,5 @@ stream while it may be possible to enable and disable the embedded data stream.
 
  The embedded data format does not need to be configured on the sensor's pads as
  the format is dictated by the pixel data format in this case.
+
+.. include:: subdev-config-model.rst
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +63 -0
new file mode 100644
index 000000000000..b0bd09772ceb
@@ -0,0 +1,209 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
+
+.. _media_subdev_config_model:
+
+Sub-device configuration models
+===============================
+
+A sub-device configuration model specifies in detail what the user space can
+expect from a sub-device in terms of V4L2 sub-device interface support,
+semantics included.
+
+A sub-device may implement more than one configuration model at the same
+time. The implemented configuration models can be obtained from the sub-device's
+``V4L2_CID_CONFIG_MODEL`` control.
+
+.. _media_subdev_config_model_common_raw_sensor:
+
+Common raw camera sensor model
+------------------------------
+
+The common raw camera sensor model defines a set of enumeration and
+configuration interfaces (formats, selections etc.) that cover the vast majority
+of functionality of raw camera sensors. Not all of the interfaces are
+necessarily offered by all drivers.
+
+A sub-device complies with the common raw sensor model if the
+``V4L2_CONFIG_MODEL_COMMON_RAW`` bit is set in the ``V4L2_CID_CONFIG_MODEL``
+control of the sub-device.
+
+The common raw camera sensor model is aligned with
+:ref:`media_using_camera_sensor_drivers`. Please refer to that regarding aspects
+not specified here.
+
+Each camera sensor implementing the common raw sensor model exposes a single
+V4L2 sub-device. The sub-device contains a single source pad (0) and two or more
+internal pads: an image data internal pad (1) and optionally an embedded data
+pad (2). Additionally, further internal pads may be supported for other
+features, in which case they are documented separately for the given device.
+
+This is shown in :ref:`media_subdev_config_model_common_raw_sensor_subdev`.
+
+.. _media_subdev_config_model_common_raw_sensor_subdev:
+
+.. kernel-figure:: common-raw-sensor.svg
+    :alt:    common-raw-sensor.svg
+    :align:  center
+
+    **Common raw sensor sub-device**
+
+Routes
+^^^^^^
+
+A sub-device conforming to common raw camera sensor model implements the
+following routes.
+
+.. flat-table:: Routes
+    :header-rows: 1
+
+    * - Sink pad/stream
+      - Source pad/stream
+      - Static (X/M(aybe)/-)
+      - Mandatory (X/-)
+      - Synopsis

Documentation/userspace-api/media/v4l/subdev-config-model.rst line 73

Quoted 10 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +10 -0
+    * - 1/0
+      - 0/0
+      - X
+      - X
+      - Image data
+    * - 2/0
+      - 0/1
+      - M
+      - \-
+      - Embedded data

Maybe just have the X/M/- written out in the table (yes/maybe/no)? The letter coding feels like it just makes it harder to read.

Documentation/userspace-api/media/v4l/subdev-config-model.rst line 85

Quoted 12 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +12 -0
+
+Support for the embedded data stream is optional. Drivers supporting the
+embedded data stream may allow disabling and enabling the route when the
+streaming is disabled.
+
+Sensor pixel array size, cropping and binning
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The sensor's pixel array is divided into one or more areas. The areas around the
+edge of the pixel array, usually one or more sides, may contain optical black
+pixels, dummy pixels and other non-image pixels. The entire pixel array size is
+conveyed by the format on (pad, stream) pair 1/0.

I think we often need to refer to a stream (or to a pad if streams are not supported by the device). Maybe we can define a concise format, explained in one place, and then use it everywhere?

When referring to a pad, we should just say "pad". When referring to a stream, I don't think it helps to talk about pad-stream pairs, just say "stream".

E.g. If the subdev is implicit: "pad 1" or stream "1/0". Or if we're dealing with multiple subdevs, something like "pad ov1234:1" or "stream ov1234:1/0"? Or, if the subdev and pad are clear in the context, we can just say "stream 1".

Quoted 114 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +114 -0
+
+A rectangle within the pixel array contains the visible pixels. Capturing the
+non-visible pixels outside the visible pixel area may be supported by the
+sensor. The visible pixel area corresponds to the ``V4L2_SEL_TGT_CROP_DEFAULT``
+selection target on (pad, stream) pair 1/0.
+
+Sensors can perform multiple operations that affect the output image size. First
+of these is the analogue crop. Analogue crop limits the area of the pixel array
+which the sensor will read, affecting sensor timing as well. The granularity of
+the analogue crop configuration varies greatly across sensors: some sensors
+support only a few different analogue crop configurations whereas others may
+support anything divisible by a given number of pixels. The analogue crop
+configuration corresponds the ``V4L2_SEL_TGT_CROP`` selection target on (pad,
+stream) pair 1/0. The default analogue crop rectangle corresponds to the visible
+pixel area.
+
+In the next step, binning is performed on the image data read from camera
+sensor's pixel array, as determined by the analogue crop configuration. Enabling
+binning will effectively result in an image smaller than the original by given
+binning factors horizontally and vertically. Typical values are 1/2 and 1/3 but
+others may well be supported by the hardware as well.
+
+Sub-sampling follows binning. Sub-sampling, like binning, reduces the size of
+the image by including only a subset of samples read from the sensor's pixel
+matrix, typically every n'th pixel horizontally and vertically, taking the
+sensor's colour pattern into account. Sub-sampling is generally configurable
+separately horizontally and vertically.
+
+Binning and sub-sampling are configured using the ``V4L2_SEL_TGT_COMPOSE``
+rectangle, relative to the analogue crop rectangle, on (pad, stream) pair
+1/0. The driver implementation determines how to configure binning and
+sub-sampling to achieve the desired size.
+
+The digital crop operation takes place after binning and sub-sampling. It is
+configured by setting the ``V4L2_SEL_TGT_CROP`` rectangle on (pad, stream) pair
+0/0. The resulting image size is further output by the sensor.
+
+The sensor's output mbus code is configured by setting the format on the (pad,
+stream) pair 0/0. When setting the format, always use the same width and height
+as for the digital crop setting.
+
+Drivers may only support some of even none of these configurations, in which
+case they do not expose the corresponding selection rectangles. If any selection
+targets are omitted, the further selection rectangle or format is instead
+related to the previous implemented selection rectangle. For instance, if the
+sensor supports binning but not analogue crop, then the binning configuration
+(``V4L2_SEL_TGT_COMPOSE`` selection target) is done in relation to the visible
+pixel area (``V4L2_SEL_TGT_CROP_DEFAULT`` selection target).
+
+Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`.
+
+.. flat-table:: Selection targets on pads
+    :header-rows: 1
+
+    * - Pad/Stream
+      - Selection target/format
+      - Mandatory (X/-)
+      - Modifiable (X/-)
+      - Synopsis
+    * - 1/0
+      - Format
+      - X
+      - \-
+      - Image data format. The width and the height fields indicates the full
+        size of the pixel array, including non-visible pixels. The media bus
+        code of this format reflects the native pixel depth of the sensor.
+    * - 1/0
+      - ``V4L2_SEL_TGT_CROP_DEFAULT``
+      - X
+      - \
+      - The visible pixel area. This rectangle is relative to the format on the
+        same (pad, stream).
+    * - 1/0
+      - ``V4L2_SEL_TGT_CROP``
+      - \-
+      - X
+      - Analogue crop. Analogue crop typically has a coarse granularity. This
+        rectangle is relative to the format on the same (pad, stream).
+    * - 1/0
+      - ``V4L2_SEL_TGT_COMPOSE``
+      - \-
+      - X
+      - Binning and sub-sampling. This rectangle is relative to the
+        ``V4L2_SEL_TGT_CROP`` rectangle on the same (pad, stream). The
+        combination of binning and sub-sampling is configured using this
+        selection target.
+    * - 2/0
+      - Format
+      - X
+      - \-
+      - Embedded data format.
+    * - 0/0
+      - ``V4L2_SEL_TGT_CROP``
+      - \-
+      - X
+      - Digital crop. This rectangle is relative to the ``V4L2_SEL_TGT_COMPOSE``
+        rectangle on (pad, stream) pair 1/0.
+    * - 0/0
+      - Format
+      - X
+      - X
+      - Image data source format. Always assign the width and height fields of
+        the format to the same values than for the ``V4L2_SEL_TGT_CROP``
+        rectangle on (pad, stream) pair 0/0. The media bus code reflects the
+        pixel data output of the sensor.
+    * - 0/1
+      - Format
+      - X
+      - \-
+      - Embedded data source format.
+
+Embedded data
+^^^^^^^^^^^^^
+

Documentation/userspace-api/media/v4l/subdev-config-model.rst line 209

Quoted 10 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +10 -0
+The embedded data stream is produced by the sensor when the corresponding route
+is enabled. The embedded data route may also be immutable or not exist at all,
+in case the sensor (or the driver) does not support it.
+
+Generally the sensor embedded data width is determined by the width of the image
+data whereas the number of lines are constant for the embedded data. The user
+space may obtain the size of the embedded data once the image data size on the
+source pad has been configured.
+
+Also see :ref:`media_using_camera_sensor_drivers_embedded_data`.

I'm not that familiar with raw sensor pipelines and cropping, but looks good to me.

Tomi

#9 lore raw

Re: [RFC v4 4/9] media: Documentation: Add subdev configuration models, raw sensor model

Moi,

Quoted 619 lines · Tomi Valkeinen

Hi,

Quoted 616 lines · Sakari Ailus

Sub-device configuration models define what V4L2 API elements are available on a compliant sub-device and how do they behave.

The patch also adds a model for common raw sensors.

---
  .../media/drivers/camera-sensor.rst           |   4 +
  .../media/v4l/common-raw-sensor.dia           | 441 ++++++++++++++++++
  .../media/v4l/common-raw-sensor.svg           | 134 ++++++
  .../userspace-api/media/v4l/dev-subdev.rst    |   2 +
  .../media/v4l/subdev-config-model.rst         | 209 +++++++++
  5 files changed, 790 insertions(+)

create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.dia create mode 100644 Documentation/userspace-api/media/v4l/common-raw-sensor.svg create mode 100644 Documentation/userspace-api/media/v4l/subdev-config-model.rst

Documentation/userspace-api/media/drivers/camera-sensor.rst +4 -0
index bc55c861fb69..5bc4c79d230c 100644
@@ -18,6 +18,8 @@ binning functionality. The sensor drivers belong to two distinct classes, freely
  configurable and register list-based drivers, depending on how the driver
  configures this functionality.
+Also see :ref:`media_subdev_config_model_common_raw_sensor`.
+
  Freely configurable camera sensor drivers
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -105,6 +107,8 @@ values programmed by the register sequences. The default values of these
  controls shall be 0 (disabled). Especially these controls shall not be inverted,
  independently of the sensor's mounting rotation.
+.. _media_using_camera_sensor_drivers_embedded_data:
+
  Embedded data
  -------------
Documentation/userspace-api/media/v4l/common-raw-sensor.dia new file +441 -0
new file mode 100644
index 000000000000..aa927527eae3
@@ -0,0 +1,441 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/">
+  <dia:diagramdata>
+    <dia:attribute name="background">
+      <dia:color val="#ffffffff"/>
+    </dia:attribute>
+    <dia:attribute name="pagebreak">
+      <dia:color val="#000099ff"/>
+    </dia:attribute>
+    <dia:attribute name="paper">
+      <dia:composite type="paper">
+        <dia:attribute name="name">
+          <dia:string>#A4#</dia:string>
+        </dia:attribute>
+        <dia:attribute name="tmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="bmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="lmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="rmargin">
+          <dia:real val="2.8222"/>
+        </dia:attribute>
+        <dia:attribute name="is_portrait">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="scaling">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="fitto">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="grid">
+      <dia:composite type="grid">
+        <dia:attribute name="dynamic">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="width_x">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="width_y">
+          <dia:real val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_x">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:attribute name="visible_y">
+          <dia:int val="1"/>
+        </dia:attribute>
+        <dia:composite type="color"/>
+      </dia:composite>
+    </dia:attribute>
+    <dia:attribute name="color">
+      <dia:color val="#d8e5e5ff"/>
+    </dia:attribute>
+    <dia:attribute name="guides"/>
+    <dia:attribute name="guide_color">
+      <dia:color val="#00ff00ff"/>
+    </dia:attribute>
+    <dia:attribute name="display">
+      <dia:composite type="display">
+        <dia:attribute name="antialiased">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="snap-to-grid">
+          <dia:boolean val="false"/>
+        </dia:attribute>
+        <dia:attribute name="snap-to-guides">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="snap-to-object">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="show-grid">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="show-guides">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+        <dia:attribute name="show-connection-points">
+          <dia:boolean val="true"/>
+        </dia:attribute>
+      </dia:composite>
+    </dia:attribute>
+  </dia:diagramdata>
+  <dia:layer name="Background" visible="true" connectable="false"/>
+  <dia:layer name="Background" visible="true" connectable="false"/>
+  <dia:layer name="Background" visible="true" connectable="true" active="true">
+    <dia:object type="Standard - Box" version="0" id="O0">
+      <dia:attribute name="obj_pos">
+        <dia:point val="16.35,11.5"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="16.3,11.45;25.8,18.45"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="16.35,11.5"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="9.4000000000000021"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="6.9000000000000021"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O1">
+      <dia:attribute name="obj_pos">
+        <dia:point val="25.5627,14.578"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.4627,14.478;26.0191,15.0344"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="25.5627,14.578"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.35638032780853468"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.35638032780853468"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000ff"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O2">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.7702,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.6702,13.1656;18.24,13.7354"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="17.7702,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000ff"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Geometric - Perfect Circle" version="1" id="O3">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.7464,16.2056"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.6464,16.1056;18.2162,16.6754"/>
+      </dia:attribute>
+      <dia:attribute name="meta">
+        <dia:composite type="dict"/>
+      </dia:attribute>
+      <dia:attribute name="elem_corner">
+        <dia:point val="17.7464,16.2056"/>
+      </dia:attribute>
+      <dia:attribute name="elem_width">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="elem_height">
+        <dia:real val="0.36980024191863681"/>
+      </dia:attribute>
+      <dia:attribute name="line_width">
+        <dia:real val="0.10000000000000001"/>
+      </dia:attribute>
+      <dia:attribute name="line_colour">
+        <dia:color val="#000000ff"/>
+      </dia:attribute>
+      <dia:attribute name="fill_colour">
+        <dia:color val="#ffffffff"/>
+      </dia:attribute>
+      <dia:attribute name="show_background">
+        <dia:boolean val="true"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="0"/>
+        <dia:real val="1"/>
+      </dia:attribute>
+      <dia:attribute name="flip_horizontal">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="flip_vertical">
+        <dia:boolean val="false"/>
+      </dia:attribute>
+      <dia:attribute name="subscale">
+        <dia:real val="1"/>
+      </dia:attribute>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O4">
+      <dia:attribute name="obj_pos">
+        <dia:point val="18.1609,16.3413"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="18.1016,14.5712;25.6221,16.4007"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="18.1609,16.3413"/>
+        <dia:point val="25.5627,14.7562"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="line_style">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O3" connection="8"/>
+        <dia:connection handle="1" to="O1" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O5">
+      <dia:attribute name="obj_pos">
+        <dia:point val="18.14,13.4505"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="18.0821,13.3926;25.6206,14.9674"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="18.14,13.4505"/>
+        <dia:point val="25.5627,14.7562"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O2" connection="3"/>
+        <dia:connection handle="1" to="O1" connection="2"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Line" version="0" id="O6">
+      <dia:attribute name="obj_pos">
+        <dia:point val="25.919,14.7562"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="25.8686,14.3879;31.0068,15.0497"/>
+      </dia:attribute>
+      <dia:attribute name="conn_endpoints">
+        <dia:point val="25.919,14.7562"/>
+        <dia:point val="30.9564,14.7131"/>
+      </dia:attribute>
+      <dia:attribute name="numcp">
+        <dia:int val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_length">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:attribute name="end_arrow_width">
+        <dia:real val="0.5"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O1" connection="3"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O7">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.9551,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.9551,12.5181;22.7051,13.2656"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#image data (1)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="17.9551,13.1131"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="1"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O2" connection="1"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O8">
+      <dia:attribute name="obj_pos">
+        <dia:point val="17.9313,16.5754"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="17.9313,16.5754;24.1238,17.3229"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#embedded data (2)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="17.9313,17.1704"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="0"/>
+      </dia:attribute>
+      <dia:connections>
+        <dia:connection handle="0" to="O3" connection="0"/>
+      </dia:connections>
+    </dia:object>
+    <dia:object type="Standard - Text" version="1" id="O9">
+      <dia:attribute name="obj_pos">
+        <dia:point val="26.1,14.125"/>
+      </dia:attribute>
+      <dia:attribute name="obj_bb">
+        <dia:rectangle val="26.1,13.53;30.7475,14.2775"/>
+      </dia:attribute>
+      <dia:attribute name="text">
+        <dia:composite type="text">
+          <dia:attribute name="string">
+            <dia:string>#source pad (0)#</dia:string>
+          </dia:attribute>
+          <dia:attribute name="font">
+            <dia:font family="sans" style="0" name="Helvetica"/>
+          </dia:attribute>
+          <dia:attribute name="height">
+            <dia:real val="0.80000000000000004"/>
+          </dia:attribute>
+          <dia:attribute name="pos">
+            <dia:point val="26.1,14.125"/>
+          </dia:attribute>
+          <dia:attribute name="color">
+            <dia:color val="#000000ff"/>
+          </dia:attribute>
+          <dia:attribute name="alignment">
+            <dia:enum val="0"/>
+          </dia:attribute>
+        </dia:composite>
+      </dia:attribute>
+      <dia:attribute name="valign">
+        <dia:enum val="3"/>
+      </dia:attribute>
+    </dia:object>
+  </dia:layer>
+</dia:diagram>
Documentation/userspace-api/media/v4l/common-raw-sensor.svg new file +128 -0
new file mode 100644
index 000000000000..1d6055da2519
@@ -0,0 +1,134 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="296pt" height="142pt" viewBox="0 0 296 142" version="1.1">
+<defs>
+<g>
+<symbol overflow="visible" id="glyph0-0">
+<path style="stroke:none;" d="M 0.640625 2.265625 L 0.640625 -9.015625 L 7.03125 -9.015625 L 7.03125 2.265625 Z M 1.359375 1.546875 L 6.328125 1.546875 L 6.328125 -8.296875 L 1.359375 -8.296875 Z M 1.359375 1.546875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-1">
+<path style="stroke:none;" d="M 1.203125 -7 L 2.359375 -7 L 2.359375 0 L 1.203125 0 Z M 1.203125 -9.71875 L 2.359375 -9.71875 L 2.359375 -8.265625 L 1.203125 -8.265625 Z M 1.203125 -9.71875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-2">
+<path style="stroke:none;" d="M 6.65625 -5.65625 C 6.9375 -6.164062 7.273438 -6.546875 7.671875 -6.796875 C 8.078125 -7.046875 8.550781 -7.171875 9.09375 -7.171875 C 9.820312 -7.171875 10.382812 -6.914062 10.78125 -6.40625 C 11.175781 -5.894531 11.375 -5.164062 11.375 -4.21875 L 11.375 0 L 10.21875 0 L 10.21875 -4.1875 C 10.21875 -4.851562 10.097656 -5.347656 9.859375 -5.671875 C 9.628906 -6.003906 9.269531 -6.171875 8.78125 -6.171875 C 8.1875 -6.171875 7.710938 -5.972656 7.359375 -5.578125 C 7.015625 -5.179688 6.84375 -4.640625 6.84375 -3.953125 L 6.84375 0 L 5.6875 0 L 5.6875 -4.1875 C 5.6875 -4.863281 5.566406 -5.363281 5.328125 -5.6875 C 5.097656 -6.007812 4.734375 -6.171875 4.234375 -6.171875 C 3.648438 -6.171875 3.179688 -5.96875 2.828125 -5.5625 C 2.484375 -5.164062 2.3125 -4.628906 2.3125 -3.953125 L 2.3125 0 L 1.15625 0 L 1.15625 -7 L 2.3125 -7 L 2.3125 -5.90625 C 2.582031 -6.332031 2.898438 -6.648438 3.265625 -6.859375 C 3.628906 -7.066406 4.0625 -7.171875 4.5625 -7.171875 C 5.070312 -7.171875 5.503906 -7.039062 5.859375 -6.78125 C 6.222656 -6.519531 6.488281 -6.144531 6.65625 -5.65625 Z M 6.65625 -5.65625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-3">
+<path style="stroke:none;" d="M 4.390625 -3.515625 C 3.460938 -3.515625 2.816406 -3.40625 2.453125 -3.1875 C 2.097656 -2.976562 1.921875 -2.617188 1.921875 -2.109375 C 1.921875 -1.703125 2.050781 -1.378906 2.3125 -1.140625 C 2.582031 -0.898438 2.953125 -0.78125 3.421875 -0.78125 C 4.054688 -0.78125 4.566406 -1.003906 4.953125 -1.453125 C 5.335938 -1.910156 5.53125 -2.515625 5.53125 -3.265625 L 5.53125 -3.515625 Z M 6.671875 -4 L 6.671875 0 L 5.53125 0 L 5.53125 -1.0625 C 5.269531 -0.632812 4.941406 -0.316406 4.546875 -0.109375 C 4.160156 0.0859375 3.679688 0.1875 3.109375 0.1875 C 2.390625 0.1875 1.816406 -0.015625 1.390625 -0.421875 C 0.972656 -0.828125 0.765625 -1.363281 0.765625 -2.03125 C 0.765625 -2.820312 1.023438 -3.414062 1.546875 -3.8125 C 2.078125 -4.21875 2.867188 -4.421875 3.921875 -4.421875 L 5.53125 -4.421875 L 5.53125 -4.53125 C 5.53125 -5.0625 5.351562 -5.46875 5 -5.75 C 4.65625 -6.039062 4.171875 -6.1875 3.546875 -6.1875 C 3.140625 -6.1875 2.75 -6.140625 2.375 -6.046875 C 2 -5.953125 1.632812 -5.8125 1.28125 -5.625 L 1.28125 -6.671875 C 1.695312 -6.835938 2.101562 -6.960938 2.5 -7.046875 C 2.894531 -7.128906 3.28125 -7.171875 3.65625 -7.171875 C 4.675781 -7.171875 5.429688 -6.90625 5.921875 -6.375 C 6.421875 -5.851562 6.671875 -5.0625 6.671875 -4 Z M 6.671875 -4 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-4">
+<path style="stroke:none;" d="M 5.8125 -3.578125 C 5.8125 -4.410156 5.640625 -5.054688 5.296875 -5.515625 C 4.953125 -5.972656 4.46875 -6.203125 3.84375 -6.203125 C 3.226562 -6.203125 2.75 -5.972656 2.40625 -5.515625 C 2.0625 -5.054688 1.890625 -4.410156 1.890625 -3.578125 C 1.890625 -2.753906 2.0625 -2.113281 2.40625 -1.65625 C 2.75 -1.195312 3.226562 -0.96875 3.84375 -0.96875 C 4.46875 -0.96875 4.953125 -1.195312 5.296875 -1.65625 C 5.640625 -2.113281 5.8125 -2.753906 5.8125 -3.578125 Z M 6.953125 -0.875 C 6.953125 0.320312 6.6875 1.207031 6.15625 1.78125 C 5.632812 2.363281 4.828125 2.65625 3.734375 2.65625 C 3.328125 2.65625 2.945312 2.625 2.59375 2.5625 C 2.238281 2.507812 1.890625 2.421875 1.546875 2.296875 L 1.546875 1.171875 C 1.890625 1.359375 2.222656 1.492188 2.546875 1.578125 C 2.878906 1.671875 3.21875 1.71875 3.5625 1.71875 C 4.3125 1.71875 4.875 1.519531 5.25 1.125 C 5.625 0.726562 5.8125 0.132812 5.8125 -0.65625 L 5.8125 -1.234375 C 5.570312 -0.816406 5.265625 -0.503906 4.890625 -0.296875 C 4.523438 -0.0976562 4.082031 0 3.5625 0 C 2.707031 0 2.015625 -0.328125 1.484375 -0.984375 C 0.960938 -1.640625 0.703125 -2.503906 0.703125 -3.578125 C 0.703125 -4.660156 0.960938 -5.53125 1.484375 -6.1875 C 2.015625 -6.84375 2.707031 -7.171875 3.5625 -7.171875 C 4.082031 -7.171875 4.523438 -7.066406 4.890625 -6.859375 C 5.265625 -6.648438 5.570312 -6.34375 5.8125 -5.9375 L 5.8125 -7 L 6.953125 -7 Z M 6.953125 -0.875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-5">
+<path style="stroke:none;" d="M 7.1875 -3.78125 L 7.1875 -3.21875 L 1.90625 -3.21875 C 1.957031 -2.425781 2.195312 -1.820312 2.625 -1.40625 C 3.050781 -1 3.644531 -0.796875 4.40625 -0.796875 C 4.84375 -0.796875 5.269531 -0.847656 5.6875 -0.953125 C 6.101562 -1.066406 6.515625 -1.226562 6.921875 -1.4375 L 6.921875 -0.359375 C 6.515625 -0.179688 6.09375 -0.046875 5.65625 0.046875 C 5.21875 0.140625 4.78125 0.1875 4.34375 0.1875 C 3.21875 0.1875 2.328125 -0.132812 1.671875 -0.78125 C 1.023438 -1.4375 0.703125 -2.320312 0.703125 -3.4375 C 0.703125 -4.582031 1.007812 -5.488281 1.625 -6.15625 C 2.25 -6.832031 3.085938 -7.171875 4.140625 -7.171875 C 5.078125 -7.171875 5.816406 -6.863281 6.359375 -6.25 C 6.910156 -5.644531 7.1875 -4.820312 7.1875 -3.78125 Z M 6.046875 -4.125 C 6.035156 -4.75 5.859375 -5.25 5.515625 -5.625 C 5.171875 -6 4.71875 -6.1875 4.15625 -6.1875 C 3.507812 -6.1875 2.992188 -6.003906 2.609375 -5.640625 C 2.222656 -5.285156 2 -4.78125 1.9375 -4.125 Z M 6.046875 -4.125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-6">
+<path style="stroke:none;" d=""/>
+</symbol>
+<symbol overflow="visible" id="glyph0-7">
+<path style="stroke:none;" d="M 5.8125 -5.9375 L 5.8125 -9.71875 L 6.953125 -9.71875 L 6.953125 0 L 5.8125 0 L 5.8125 -1.046875 C 5.570312 -0.628906 5.265625 -0.316406 4.890625 -0.109375 C 4.523438 0.0859375 4.082031 0.1875 3.5625 0.1875 C 2.71875 0.1875 2.03125 -0.148438 1.5 -0.828125 C 0.96875 -1.503906 0.703125 -2.394531 0.703125 -3.5 C 0.703125 -4.59375 0.96875 -5.476562 1.5 -6.15625 C 2.03125 -6.832031 2.71875 -7.171875 3.5625 -7.171875 C 4.082031 -7.171875 4.523438 -7.066406 4.890625 -6.859375 C 5.265625 -6.660156 5.570312 -6.351562 5.8125 -5.9375 Z M 1.890625 -3.5 C 1.890625 -2.644531 2.0625 -1.976562 2.40625 -1.5 C 2.757812 -1.019531 3.238281 -0.78125 3.84375 -0.78125 C 4.457031 -0.78125 4.9375 -1.019531 5.28125 -1.5 C 5.632812 -1.976562 5.8125 -2.644531 5.8125 -3.5 C 5.8125 -4.34375 5.632812 -5.003906 5.28125 -5.484375 C 4.9375 -5.960938 4.457031 -6.203125 3.84375 -6.203125 C 3.238281 -6.203125 2.757812 -5.960938 2.40625 -5.484375 C 2.0625 -5.003906 1.890625 -4.34375 1.890625 -3.5 Z M 1.890625 -3.5 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-8">
+<path style="stroke:none;" d="M 2.34375 -8.984375 L 2.34375 -7 L 4.71875 -7 L 4.71875 -6.109375 L 2.34375 -6.109375 L 2.34375 -2.3125 C 2.34375 -1.738281 2.421875 -1.367188 2.578125 -1.203125 C 2.734375 -1.046875 3.050781 -0.96875 3.53125 -0.96875 L 4.71875 -0.96875 L 4.71875 0 L 3.53125 0 C 2.644531 0 2.03125 -0.164062 1.6875 -0.5 C 1.351562 -0.832031 1.1875 -1.4375 1.1875 -2.3125 L 1.1875 -6.109375 L 0.34375 -6.109375 L 0.34375 -7 L 1.1875 -7 L 1.1875 -8.984375 Z M 2.34375 -8.984375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-9">
+<path style="stroke:none;" d="M 3.96875 -9.703125 C 3.40625 -8.742188 2.988281 -7.796875 2.71875 -6.859375 C 2.445312 -5.929688 2.3125 -4.984375 2.3125 -4.015625 C 2.3125 -3.054688 2.445312 -2.101562 2.71875 -1.15625 C 3 -0.21875 3.414062 0.726562 3.96875 1.6875 L 2.96875 1.6875 C 2.34375 0.707031 1.875 -0.253906 1.5625 -1.203125 C 1.25 -2.148438 1.09375 -3.085938 1.09375 -4.015625 C 1.09375 -4.941406 1.25 -5.875 1.5625 -6.8125 C 1.875 -7.757812 2.34375 -8.722656 2.96875 -9.703125 Z M 3.96875 -9.703125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-10">
+<path style="stroke:none;" d="M 1.59375 -1.0625 L 3.65625 -1.0625 L 3.65625 -8.171875 L 1.40625 -7.734375 L 1.40625 -8.875 L 3.640625 -9.328125 L 4.90625 -9.328125 L 4.90625 -1.0625 L 6.953125 -1.0625 L 6.953125 0 L 1.59375 0 Z M 1.59375 -1.0625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-11">
+<path style="stroke:none;" d="M 1.03125 -9.703125 L 2.03125 -9.703125 C 2.65625 -8.722656 3.117188 -7.757812 3.421875 -6.8125 C 3.734375 -5.875 3.890625 -4.941406 3.890625 -4.015625 C 3.890625 -3.085938 3.734375 -2.148438 3.421875 -1.203125 C 3.117188 -0.253906 2.65625 0.707031 2.03125 1.6875 L 1.03125 1.6875 C 1.582031 0.726562 1.992188 -0.21875 2.265625 -1.15625 C 2.535156 -2.101562 2.671875 -3.054688 2.671875 -4.015625 C 2.671875 -4.984375 2.535156 -5.929688 2.265625 -6.859375 C 1.992188 -7.796875 1.582031 -8.742188 1.03125 -9.703125 Z M 1.03125 -9.703125 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-12">
+<path style="stroke:none;" d="M 6.234375 -3.5 C 6.234375 -4.34375 6.054688 -5.003906 5.703125 -5.484375 C 5.359375 -5.960938 4.882812 -6.203125 4.28125 -6.203125 C 3.664062 -6.203125 3.179688 -5.960938 2.828125 -5.484375 C 2.484375 -5.003906 2.3125 -4.34375 2.3125 -3.5 C 2.3125 -2.644531 2.484375 -1.976562 2.828125 -1.5 C 3.179688 -1.019531 3.664062 -0.78125 4.28125 -0.78125 C 4.882812 -0.78125 5.359375 -1.019531 5.703125 -1.5 C 6.054688 -1.976562 6.234375 -2.644531 6.234375 -3.5 Z M 2.3125 -5.9375 C 2.5625 -6.351562 2.867188 -6.660156 3.234375 -6.859375 C 3.597656 -7.066406 4.039062 -7.171875 4.5625 -7.171875 C 5.40625 -7.171875 6.09375 -6.832031 6.625 -6.15625 C 7.15625 -5.476562 7.421875 -4.59375 7.421875 -3.5 C 7.421875 -2.394531 7.15625 -1.503906 6.625 -0.828125 C 6.09375 -0.148438 5.40625 0.1875 4.5625 0.1875 C 4.039062 0.1875 3.597656 0.0859375 3.234375 -0.109375 C 2.867188 -0.316406 2.5625 -0.628906 2.3125 -1.046875 L 2.3125 0 L 1.15625 0 L 1.15625 -9.71875 L 2.3125 -9.71875 Z M 2.3125 -5.9375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-13">
+<path style="stroke:none;" d="M 2.453125 -1.0625 L 6.859375 -1.0625 L 6.859375 0 L 0.9375 0 L 0.9375 -1.0625 C 1.414062 -1.5625 2.066406 -2.226562 2.890625 -3.0625 C 3.722656 -3.894531 4.242188 -4.429688 4.453125 -4.671875 C 4.859375 -5.128906 5.140625 -5.515625 5.296875 -5.828125 C 5.460938 -6.140625 5.546875 -6.445312 5.546875 -6.75 C 5.546875 -7.25 5.367188 -7.65625 5.015625 -7.96875 C 4.671875 -8.28125 4.21875 -8.4375 3.65625 -8.4375 C 3.257812 -8.4375 2.84375 -8.363281 2.40625 -8.21875 C 1.96875 -8.082031 1.5 -7.878906 1 -7.609375 L 1 -8.875 C 1.507812 -9.082031 1.984375 -9.238281 2.421875 -9.34375 C 2.867188 -9.445312 3.273438 -9.5 3.640625 -9.5 C 4.609375 -9.5 5.378906 -9.253906 5.953125 -8.765625 C 6.523438 -8.285156 6.8125 -7.640625 6.8125 -6.828125 C 6.8125 -6.453125 6.738281 -6.09375 6.59375 -5.75 C 6.445312 -5.40625 6.1875 -5 5.8125 -4.53125 C 5.707031 -4.40625 5.375 -4.054688 4.8125 -3.484375 C 4.257812 -2.910156 3.472656 -2.101562 2.453125 -1.0625 Z M 2.453125 -1.0625 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-14">
+<path style="stroke:none;" d="M 5.671875 -6.796875 L 5.671875 -5.703125 C 5.347656 -5.867188 5.007812 -5.992188 4.65625 -6.078125 C 4.300781 -6.160156 3.9375 -6.203125 3.5625 -6.203125 C 3 -6.203125 2.570312 -6.113281 2.28125 -5.9375 C 2 -5.769531 1.859375 -5.507812 1.859375 -5.15625 C 1.859375 -4.882812 1.957031 -4.671875 2.15625 -4.515625 C 2.363281 -4.367188 2.773438 -4.226562 3.390625 -4.09375 L 3.78125 -4 C 4.601562 -3.832031 5.1875 -3.585938 5.53125 -3.265625 C 5.875 -2.941406 6.046875 -2.5 6.046875 -1.9375 C 6.046875 -1.28125 5.785156 -0.757812 5.265625 -0.375 C 4.753906 0 4.050781 0.1875 3.15625 0.1875 C 2.78125 0.1875 2.390625 0.148438 1.984375 0.078125 C 1.578125 0.00390625 1.144531 -0.101562 0.6875 -0.25 L 0.6875 -1.4375 C 1.113281 -1.21875 1.53125 -1.050781 1.9375 -0.9375 C 2.351562 -0.832031 2.765625 -0.78125 3.171875 -0.78125 C 3.710938 -0.78125 4.128906 -0.875 4.421875 -1.0625 C 4.710938 -1.25 4.859375 -1.507812 4.859375 -1.84375 C 4.859375 -2.15625 4.753906 -2.394531 4.546875 -2.5625 C 4.335938 -2.726562 3.875 -2.890625 3.15625 -3.046875 L 2.765625 -3.140625 C 2.046875 -3.285156 1.53125 -3.515625 1.21875 -3.828125 C 0.90625 -4.140625 0.75 -4.566406 0.75 -5.109375 C 0.75 -5.765625 0.976562 -6.269531 1.4375 -6.625 C 1.90625 -6.988281 2.570312 -7.171875 3.4375 -7.171875 C 3.851562 -7.171875 4.25 -7.140625 4.625 -7.078125 C 5 -7.015625 5.347656 -6.921875 5.671875 -6.796875 Z M 5.671875 -6.796875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-15">
+<path style="stroke:none;" d="M 3.921875 -6.1875 C 3.304688 -6.1875 2.816406 -5.945312 2.453125 -5.46875 C 2.097656 -4.988281 1.921875 -4.332031 1.921875 -3.5 C 1.921875 -2.65625 2.097656 -1.992188 2.453125 -1.515625 C 2.804688 -1.035156 3.296875 -0.796875 3.921875 -0.796875 C 4.535156 -0.796875 5.019531 -1.035156 5.375 -1.515625 C 5.726562 -2.003906 5.90625 -2.664062 5.90625 -3.5 C 5.90625 -4.320312 5.726562 -4.972656 5.375 -5.453125 C 5.019531 -5.941406 4.535156 -6.1875 3.921875 -6.1875 Z M 3.921875 -7.171875 C 4.921875 -7.171875 5.703125 -6.84375 6.265625 -6.1875 C 6.835938 -5.539062 7.125 -4.644531 7.125 -3.5 C 7.125 -2.351562 6.835938 -1.453125 6.265625 -0.796875 C 5.703125 -0.140625 4.921875 0.1875 3.921875 0.1875 C 2.910156 0.1875 2.117188 -0.140625 1.546875 -0.796875 C 0.984375 -1.453125 0.703125 -2.351562 0.703125 -3.5 C 0.703125 -4.644531 0.984375 -5.539062 1.546875 -6.1875 C 2.117188 -6.84375 2.910156 -7.171875 3.921875 -7.171875 Z M 3.921875 -7.171875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-16">
+<path style="stroke:none;" d="M 1.09375 -2.765625 L 1.09375 -7 L 2.234375 -7 L 2.234375 -2.8125 C 2.234375 -2.144531 2.363281 -1.644531 2.625 -1.3125 C 2.882812 -0.976562 3.269531 -0.8125 3.78125 -0.8125 C 4.40625 -0.8125 4.894531 -1.007812 5.25 -1.40625 C 5.613281 -1.800781 5.796875 -2.34375 5.796875 -3.03125 L 5.796875 -7 L 6.953125 -7 L 6.953125 0 L 5.796875 0 L 5.796875 -1.078125 C 5.515625 -0.648438 5.191406 -0.332031 4.828125 -0.125 C 4.460938 0.0820312 4.035156 0.1875 3.546875 0.1875 C 2.742188 0.1875 2.132812 -0.0625 1.71875 -0.5625 C 1.300781 -1.0625 1.09375 -1.796875 1.09375 -2.765625 Z M 3.984375 -7.171875 Z M 3.984375 -7.171875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-17">
+<path style="stroke:none;" d="M 5.265625 -5.921875 C 5.128906 -5.992188 4.984375 -6.046875 4.828125 -6.078125 C 4.679688 -6.117188 4.519531 -6.140625 4.34375 -6.140625 C 3.6875 -6.140625 3.179688 -5.925781 2.828125 -5.5 C 2.484375 -5.082031 2.3125 -4.476562 2.3125 -3.6875 L 2.3125 0 L 1.15625 0 L 1.15625 -7 L 2.3125 -7 L 2.3125 -5.90625 C 2.5625 -6.332031 2.878906 -6.648438 3.265625 -6.859375 C 3.648438 -7.066406 4.117188 -7.171875 4.671875 -7.171875 C 4.753906 -7.171875 4.84375 -7.164062 4.9375 -7.15625 C 5.03125 -7.144531 5.132812 -7.128906 5.25 -7.109375 Z M 5.265625 -5.921875 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-18">
+<path style="stroke:none;" d="M 6.25 -6.734375 L 6.25 -5.65625 C 5.914062 -5.832031 5.585938 -5.960938 5.265625 -6.046875 C 4.941406 -6.140625 4.613281 -6.1875 4.28125 -6.1875 C 3.53125 -6.1875 2.945312 -5.953125 2.53125 -5.484375 C 2.125 -5.015625 1.921875 -4.351562 1.921875 -3.5 C 1.921875 -2.644531 2.125 -1.976562 2.53125 -1.5 C 2.945312 -1.03125 3.53125 -0.796875 4.28125 -0.796875 C 4.613281 -0.796875 4.941406 -0.835938 5.265625 -0.921875 C 5.585938 -1.015625 5.914062 -1.148438 6.25 -1.328125 L 6.25 -0.265625 C 5.925781 -0.117188 5.59375 -0.0078125 5.25 0.0625 C 4.90625 0.144531 4.539062 0.1875 4.15625 0.1875 C 3.09375 0.1875 2.25 -0.144531 1.625 -0.8125 C 1.007812 -1.476562 0.703125 -2.375 0.703125 -3.5 C 0.703125 -4.632812 1.015625 -5.53125 1.640625 -6.1875 C 2.273438 -6.84375 3.132812 -7.171875 4.21875 -7.171875 C 4.570312 -7.171875 4.914062 -7.132812 5.25 -7.0625 C 5.59375 -6.988281 5.925781 -6.878906 6.25 -6.734375 Z M 6.25 -6.734375 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-19">
+<path style="stroke:none;" d="M 2.3125 -1.046875 L 2.3125 2.65625 L 1.15625 2.65625 L 1.15625 -7 L 2.3125 -7 L 2.3125 -5.9375 C 2.5625 -6.351562 2.867188 -6.660156 3.234375 -6.859375 C 3.597656 -7.066406 4.039062 -7.171875 4.5625 -7.171875 C 5.40625 -7.171875 6.09375 -6.832031 6.625 -6.15625 C 7.15625 -5.476562 7.421875 -4.59375 7.421875 -3.5 C 7.421875 -2.394531 7.15625 -1.503906 6.625 -0.828125 C 6.09375 -0.148438 5.40625 0.1875 4.5625 0.1875 C 4.039062 0.1875 3.597656 0.0859375 3.234375 -0.109375 C 2.867188 -0.316406 2.5625 -0.628906 2.3125 -1.046875 Z M 6.234375 -3.5 C 6.234375 -4.34375 6.054688 -5.003906 5.703125 -5.484375 C 5.359375 -5.960938 4.882812 -6.203125 4.28125 -6.203125 C 3.664062 -6.203125 3.179688 -5.960938 2.828125 -5.484375 C 2.484375 -5.003906 2.3125 -4.34375 2.3125 -3.5 C 2.3125 -2.644531 2.484375 -1.976562 2.828125 -1.5 C 3.179688 -1.019531 3.664062 -0.78125 4.28125 -0.78125 C 4.882812 -0.78125 5.359375 -1.019531 5.703125 -1.5 C 6.054688 -1.976562 6.234375 -2.644531 6.234375 -3.5 Z M 6.234375 -3.5 "/>
+</symbol>
+<symbol overflow="visible" id="glyph0-20">
+<path style="stroke:none;" d="M 4.0625 -8.5 C 3.414062 -8.5 2.925781 -8.175781 2.59375 -7.53125 C 2.269531 -6.894531 2.109375 -5.9375 2.109375 -4.65625 C 2.109375 -3.375 2.269531 -2.410156 2.59375 -1.765625 C 2.925781 -1.128906 3.414062 -0.8125 4.0625 -0.8125 C 4.71875 -0.8125 5.207031 -1.128906 5.53125 -1.765625 C 5.863281 -2.410156 6.03125 -3.375 6.03125 -4.65625 C 6.03125 -5.9375 5.863281 -6.894531 5.53125 -7.53125 C 5.207031 -8.175781 4.71875 -8.5 4.0625 -8.5 Z M 4.0625 -9.5 C 5.113281 -9.5 5.914062 -9.082031 6.46875 -8.25 C 7.019531 -7.425781 7.296875 -6.226562 7.296875 -4.65625 C 7.296875 -3.082031 7.019531 -1.878906 6.46875 -1.046875 C 5.914062 -0.222656 5.113281 0.1875 4.0625 0.1875 C 3.019531 0.1875 2.222656 -0.222656 1.671875 -1.046875 C 1.117188 -1.878906 0.84375 -3.082031 0.84375 -4.65625 C 0.84375 -6.226562 1.117188 -7.425781 1.671875 -8.25 C 2.222656 -9.082031 3.019531 -9.5 4.0625 -9.5 Z M 4.0625 -9.5 "/>
+</symbol>
+</g>
+</defs>
+<g id="surface11910">
+<rect x="0" y="0" width="296" height="142" style="fill:rgb(100%,100%,100%);fill-opacity:1;stroke:none;"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 16.35 11.5 L 25.75 11.5 L 25.75 18.4 L 16.35 18.4 Z M 16.35 11.5 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 25.919141 14.75625 C 25.919141 14.99375 25.562695 14.99375 25.562695 14.75625 C 25.562695 14.518555 25.919141 14.518555 25.919141 14.75625 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 18.140039 13.450586 C 18.140039 13.69707 17.770117 13.69707 17.770117 13.450586 C 17.770117 13.203906 18.140039 13.203906 18.140039 13.450586 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill-rule:evenodd;fill:rgb(100%,100%,100%);fill-opacity:1;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 18.116211 16.39043 C 18.116211 16.637109 17.746484 16.637109 17.746484 16.39043 C 17.746484 16.143945 18.116211 16.143945 18.116211 16.39043 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-dasharray:1,1;stroke-miterlimit:10;" d="M 18.160937 16.341406 L 25.344141 14.80293 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 25.016797 15.128711 L 25.45332 14.779687 L 24.912109 14.639844 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 18.140039 13.450586 L 25.342383 14.717383 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 24.916797 14.896484 L 25.452539 14.736914 L 25.003516 14.403906 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 25.918945 14.75625 L 30.732813 14.715039 " transform="matrix(20,0,0,20,-325,-228)"/>
+<path style="fill:none;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke:rgb(0%,0%,0%);stroke-opacity:1;stroke-miterlimit:10;" d="M 30.34668 14.968359 L 30.844531 14.714062 L 30.342383 14.468359 " transform="matrix(20,0,0,20,-325,-228)"/>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-1" x="34.101562" y="34.267687"/>
+  <use xlink:href="#glyph0-2" x="37.712674" y="34.267687"/>
+  <use xlink:href="#glyph0-3" x="50.212674" y="34.267687"/>
+  <use xlink:href="#glyph0-4" x="57.990451" y="34.267687"/>
+  <use xlink:href="#glyph0-5" x="66.046007" y="34.267687"/>
+  <use xlink:href="#glyph0-6" x="73.823785" y="34.267687"/>
+  <use xlink:href="#glyph0-7" x="77.990451" y="34.267687"/>
+  <use xlink:href="#glyph0-3" x="86.046007" y="34.267687"/>
+  <use xlink:href="#glyph0-8" x="93.823785" y="34.267687"/>
+  <use xlink:href="#glyph0-3" x="98.823785" y="34.267687"/>
+  <use xlink:href="#glyph0-6" x="106.601562" y="34.267687"/>
+  <use xlink:href="#glyph0-9" x="110.768229" y="34.267687"/>
+  <use xlink:href="#glyph0-10" x="115.768229" y="34.267687"/>
+  <use xlink:href="#glyph0-11" x="123.823785" y="34.267687"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-5" x="33.625" y="115.412218"/>
+  <use xlink:href="#glyph0-2" x="41.402778" y="115.412218"/>
+  <use xlink:href="#glyph0-12" x="53.902778" y="115.412218"/>
+  <use xlink:href="#glyph0-5" x="61.958333" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="69.736111" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="77.791667" y="115.412218"/>
+  <use xlink:href="#glyph0-5" x="85.847222" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="93.625" y="115.412218"/>
+  <use xlink:href="#glyph0-6" x="101.680556" y="115.412218"/>
+  <use xlink:href="#glyph0-7" x="105.847222" y="115.412218"/>
+  <use xlink:href="#glyph0-3" x="113.902778" y="115.412218"/>
+  <use xlink:href="#glyph0-8" x="121.680556" y="115.412218"/>
+  <use xlink:href="#glyph0-3" x="126.680556" y="115.412218"/>
+  <use xlink:href="#glyph0-6" x="134.458333" y="115.412218"/>
+  <use xlink:href="#glyph0-9" x="138.625" y="115.412218"/>
+  <use xlink:href="#glyph0-13" x="143.625" y="115.412218"/>
+  <use xlink:href="#glyph0-11" x="151.680556" y="115.412218"/>
+</g>
+<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
+  <use xlink:href="#glyph0-14" x="197" y="54.505968"/>
+  <use xlink:href="#glyph0-15" x="203.666667" y="54.505968"/>
+  <use xlink:href="#glyph0-16" x="211.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-17" x="219.5" y="54.505968"/>
+  <use xlink:href="#glyph0-18" x="224.5" y="54.505968"/>
+  <use xlink:href="#glyph0-5" x="231.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-6" x="239.222222" y="54.505968"/>
+  <use xlink:href="#glyph0-19" x="243.388889" y="54.505968"/>
+  <use xlink:href="#glyph0-3" x="251.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-7" x="259.222222" y="54.505968"/>
+  <use xlink:href="#glyph0-6" x="267.277778" y="54.505968"/>
Quoted 8 lines

Documentation/userspace-api/media/v4l/common-raw-sensor.svg line 134

Quoted 6 lines
Documentation/userspace-api/media/v4l/common-raw-sensor.svg new file +6 -0
+  <use xlink:href="#glyph0-9" x="271.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-20" x="276.444444" y="54.505968"/>
+  <use xlink:href="#glyph0-11" x="284.5" y="54.505968"/>
+</g>
+</g>
+</svg>

That's a lot of text for a simple picture =).

There are arrows and a box, too. It's around 140 lines, not entirely unreasonable in my opinion.

Quoted 84 lines
Quoted 84 lines
Documentation/userspace-api/media/v4l/dev-subdev.rst +2 -0
index dcfcbd52490d..4d145bd3bd09 100644
@@ -838,3 +838,5 @@ stream while it may be possible to enable and disable the embedded data stream.
  The embedded data format does not need to be configured on the sensor's pads as
  the format is dictated by the pixel data format in this case.
+
+.. include:: subdev-config-model.rst
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +68 -0
new file mode 100644
index 000000000000..b0bd09772ceb
@@ -0,0 +1,209 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
+
+.. _media_subdev_config_model:
+
+Sub-device configuration models
+===============================
+
+A sub-device configuration model specifies in detail what the user space can
+expect from a sub-device in terms of V4L2 sub-device interface support,
+semantics included.
+
+A sub-device may implement more than one configuration model at the same
+time. The implemented configuration models can be obtained from the sub-device's
+``V4L2_CID_CONFIG_MODEL`` control.
+
+.. _media_subdev_config_model_common_raw_sensor:
+
+Common raw camera sensor model
+------------------------------
+
+The common raw camera sensor model defines a set of enumeration and
+configuration interfaces (formats, selections etc.) that cover the vast majority
+of functionality of raw camera sensors. Not all of the interfaces are
+necessarily offered by all drivers.
+
+A sub-device complies with the common raw sensor model if the
+``V4L2_CONFIG_MODEL_COMMON_RAW`` bit is set in the ``V4L2_CID_CONFIG_MODEL``
+control of the sub-device.
+
+The common raw camera sensor model is aligned with
+:ref:`media_using_camera_sensor_drivers`. Please refer to that regarding aspects
+not specified here.
+
+Each camera sensor implementing the common raw sensor model exposes a single
+V4L2 sub-device. The sub-device contains a single source pad (0) and two or more
+internal pads: an image data internal pad (1) and optionally an embedded data
+pad (2). Additionally, further internal pads may be supported for other
+features, in which case they are documented separately for the given device.
+
+This is shown in :ref:`media_subdev_config_model_common_raw_sensor_subdev`.
+
+.. _media_subdev_config_model_common_raw_sensor_subdev:
+
+.. kernel-figure:: common-raw-sensor.svg
+    :alt:    common-raw-sensor.svg
+    :align:  center
+
+    **Common raw sensor sub-device**
+
+Routes
+^^^^^^
+
+A sub-device conforming to common raw camera sensor model implements the
+following routes.
+
+.. flat-table:: Routes
+    :header-rows: 1
+
+    * - Sink pad/stream
+      - Source pad/stream
+      - Static (X/M(aybe)/-)
+      - Mandatory (X/-)
+      - Synopsis
+    * - 1/0
+      - 0/0
+      - X
+      - X
+      - Image data
Quoted 8 lines

Documentation/userspace-api/media/v4l/subdev-config-model.rst line 73

Quoted 5 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +5 -0
+    * - 2/0
+      - 0/1
+      - M
+      - \-
+      - Embedded data

Maybe just have the X/M/- written out in the table (yes/maybe/no)? The letter coding feels like it just makes it harder to read.

We should follow the same notation here that's used in pre-existing documentation. Then we can separately discuss whether we should change the practices. I'll check the preceding streams / metadata patches, too, those may be using O for "optional".

Quoted 18 lines

Documentation/userspace-api/media/v4l/subdev-config-model.rst line 85

Quoted 13 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +12 -0
+
+Support for the embedded data stream is optional. Drivers supporting the
+embedded data stream may allow disabling and enabling the route when the
+streaming is disabled.
+
+Sensor pixel array size, cropping and binning
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The sensor's pixel array is divided into one or more areas. The areas around the
+edge of the pixel array, usually one or more sides, may contain optical black
+pixels, dummy pixels and other non-image pixels. The entire pixel array size is
+conveyed by the format on (pad, stream) pair 1/0.

I think we often need to refer to a stream (or to a pad if streams are not supported by the device). Maybe we can define a concise format, explained in one place, and then use it everywhere?

Quoted 8 lines

When referring to a pad, we should just say "pad". When referring to a stream, I don't think it helps to talk about pad-stream pairs, just say "stream".

E.g. If the subdev is implicit: "pad 1" or stream "1/0". Or if we're dealing with multiple subdevs, something like "pad ov1234:1" or "stream ov1234:1/0"? Or, if the subdev and pad are clear in the context, we can just say "stream 1".

The earlier patches in the set (around 50 in total now) use "(pad, stream) pair", and that was the result of a lengthy discussion. :-) I'm fine with changing that but we need to be consistent.

Quoted 129 lines
Quoted 115 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +114 -0
+
+A rectangle within the pixel array contains the visible pixels. Capturing the
+non-visible pixels outside the visible pixel area may be supported by the
+sensor. The visible pixel area corresponds to the ``V4L2_SEL_TGT_CROP_DEFAULT``
+selection target on (pad, stream) pair 1/0.
+
+Sensors can perform multiple operations that affect the output image size. First
+of these is the analogue crop. Analogue crop limits the area of the pixel array
+which the sensor will read, affecting sensor timing as well. The granularity of
+the analogue crop configuration varies greatly across sensors: some sensors
+support only a few different analogue crop configurations whereas others may
+support anything divisible by a given number of pixels. The analogue crop
+configuration corresponds the ``V4L2_SEL_TGT_CROP`` selection target on (pad,
+stream) pair 1/0. The default analogue crop rectangle corresponds to the visible
+pixel area.
+
+In the next step, binning is performed on the image data read from camera
+sensor's pixel array, as determined by the analogue crop configuration. Enabling
+binning will effectively result in an image smaller than the original by given
+binning factors horizontally and vertically. Typical values are 1/2 and 1/3 but
+others may well be supported by the hardware as well.
+
+Sub-sampling follows binning. Sub-sampling, like binning, reduces the size of
+the image by including only a subset of samples read from the sensor's pixel
+matrix, typically every n'th pixel horizontally and vertically, taking the
+sensor's colour pattern into account. Sub-sampling is generally configurable
+separately horizontally and vertically.
+
+Binning and sub-sampling are configured using the ``V4L2_SEL_TGT_COMPOSE``
+rectangle, relative to the analogue crop rectangle, on (pad, stream) pair
+1/0. The driver implementation determines how to configure binning and
+sub-sampling to achieve the desired size.
+
+The digital crop operation takes place after binning and sub-sampling. It is
+configured by setting the ``V4L2_SEL_TGT_CROP`` rectangle on (pad, stream) pair
+0/0. The resulting image size is further output by the sensor.
+
+The sensor's output mbus code is configured by setting the format on the (pad,
+stream) pair 0/0. When setting the format, always use the same width and height
+as for the digital crop setting.
+
+Drivers may only support some of even none of these configurations, in which
+case they do not expose the corresponding selection rectangles. If any selection
+targets are omitted, the further selection rectangle or format is instead
+related to the previous implemented selection rectangle. For instance, if the
+sensor supports binning but not analogue crop, then the binning configuration
+(``V4L2_SEL_TGT_COMPOSE`` selection target) is done in relation to the visible
+pixel area (``V4L2_SEL_TGT_CROP_DEFAULT`` selection target).
+
+Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`.
+
+.. flat-table:: Selection targets on pads
+    :header-rows: 1
+
+    * - Pad/Stream
+      - Selection target/format
+      - Mandatory (X/-)
+      - Modifiable (X/-)
+      - Synopsis
+    * - 1/0
+      - Format
+      - X
+      - \-
+      - Image data format. The width and the height fields indicates the full
+        size of the pixel array, including non-visible pixels. The media bus
+        code of this format reflects the native pixel depth of the sensor.
+    * - 1/0
+      - ``V4L2_SEL_TGT_CROP_DEFAULT``
+      - X
+      - \
+      - The visible pixel area. This rectangle is relative to the format on the
+        same (pad, stream).
+    * - 1/0
+      - ``V4L2_SEL_TGT_CROP``
+      - \-
+      - X
+      - Analogue crop. Analogue crop typically has a coarse granularity. This
+        rectangle is relative to the format on the same (pad, stream).
+    * - 1/0
+      - ``V4L2_SEL_TGT_COMPOSE``
+      - \-
+      - X
+      - Binning and sub-sampling. This rectangle is relative to the
+        ``V4L2_SEL_TGT_CROP`` rectangle on the same (pad, stream). The
+        combination of binning and sub-sampling is configured using this
+        selection target.
+    * - 2/0
+      - Format
+      - X
+      - \-
+      - Embedded data format.
+    * - 0/0
+      - ``V4L2_SEL_TGT_CROP``
+      - \-
+      - X
+      - Digital crop. This rectangle is relative to the ``V4L2_SEL_TGT_COMPOSE``
+        rectangle on (pad, stream) pair 1/0.
+    * - 0/0
+      - Format
+      - X
+      - X
+      - Image data source format. Always assign the width and height fields of
+        the format to the same values than for the ``V4L2_SEL_TGT_CROP``
+        rectangle on (pad, stream) pair 0/0. The media bus code reflects the
+        pixel data output of the sensor.
+    * - 0/1
+      - Format
+      - X
+      - \-
+      - Embedded data source format.
+
+Embedded data
+^^^^^^^^^^^^^
+

Documentation/userspace-api/media/v4l/subdev-config-model.rst line 209

Quoted 10 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst new file +10 -0
+The embedded data stream is produced by the sensor when the corresponding route
+is enabled. The embedded data route may also be immutable or not exist at all,
+in case the sensor (or the driver) does not support it.
+
+Generally the sensor embedded data width is determined by the width of the image
+data whereas the number of lines are constant for the embedded data. The user
+space may obtain the size of the embedded data once the image data size on the
+source pad has been configured.
+
+Also see :ref:`media_using_camera_sensor_drivers_embedded_data`.

I'm not that familiar with raw sensor pipelines and cropping, but looks good to me.

Quoted 1 line

Thanks!

Signature · 3 lines
Terveisin,

Sakari Ailus
#10 lore raw

RFC v4 5/9 media: Documentation: Add scaling and post-scaler crop for common raw

In reply to Sakari Ailus

Document scaling and post-scaler digital crop operations for the common raw sensor model.

---
 .../media/v4l/subdev-config-model.rst         | 24 +++++++++++++++----
 1 file changed, 19 insertions(+), 5 deletions(-)
Documentation/userspace-api/media/v4l/subdev-config-model.rst +19 -5
index b0bd09772ceb..f15e5495cc34 100644
@@ -118,11 +118,18 @@ sub-sampling to achieve the desired size.
 
 The digital crop operation takes place after binning and sub-sampling. It is
 configured by setting the ``V4L2_SEL_TGT_CROP`` rectangle on (pad, stream) pair
-0/0. The resulting image size is further output by the sensor.
+0/0.
+
+The scaling operation is performed after the digital crop. It is configured by
+setting the ``V4L2_SEL_TGT_COMPOSE`` rectangle on (pad, stream) pair 0/0,
+relative to the digital crop.
 
 The sensor's output mbus code is configured by setting the format on the (pad,
-stream) pair 0/0. When setting the format, always use the same width and height
-as for the digital crop setting.
+stream) pair 0/0. The width and height fields are used to configure post-scaler
+digital crop if supported by the driver, affecting the right and bottom edges of
+the frame. If post-scaler digital crop is not supported, the width and height
+fields of the format will match the compose rectangle sizes applied on the same
+0/0 (pad, stream) pair.
 
 Drivers may only support some of even none of these configurations, in which
 case they do not expose the corresponding selection rectangles. If any selection
@@ -180,12 +187,19 @@ Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`.
       - X
       - Digital crop. This rectangle is relative to the ``V4L2_SEL_TGT_COMPOSE``
         rectangle on (pad, stream) pair 1/0.
+    * - 0/0
+      - ``V4L2_SEL_TGT_COMPOSE``
+      - \-
+      - X
+      - Scaling. This rectangle is relative to the ``V4L2_SEL_TGT_CROP``
+        rectangle on (pad, stream) pair 0/0.
     * - 0/0
       - Format
       - X
       - X
-      - Image data source format. Always assign the width and height fields of
-        the format to the same values than for the ``V4L2_SEL_TGT_CROP``
+      - Image data source format and post-scaler crop. The width and height
+        fields of the format, used to configure post-scaler crop on the right
+        and bottom edges of the image, are related to the ``V4L2_SEL_TGT_COMPOSE``
         rectangle on (pad, stream) pair 0/0. The media bus code reflects the
         pixel data output of the sensor.
     * - 0/1
Signature · 1 line
2.39.5
Reviewed-by on v4 5/9
#11 lore raw

Re: [RFC v4 5/9] media: Documentation: Add scaling and post-scaler crop for common raw

Hi,

Quoted 3 lines · Sakari Ailus

Document scaling and post-scaler digital crop operations for the common raw sensor model.

Missing line feed, and "Signedg". checkpatch didn't complain?

Quoted 42 lines
---
  .../media/v4l/subdev-config-model.rst         | 24 +++++++++++++++----
  1 file changed, 19 insertions(+), 5 deletions(-)
Documentation/userspace-api/media/v4l/subdev-config-model.rst +16 -3
index b0bd09772ceb..f15e5495cc34 100644
@@ -118,11 +118,18 @@ sub-sampling to achieve the desired size.
 
  The digital crop operation takes place after binning and sub-sampling. It is
  configured by setting the ``V4L2_SEL_TGT_CROP`` rectangle on (pad, stream) pair
-0/0. The resulting image size is further output by the sensor.
+0/0.
+
+The scaling operation is performed after the digital crop. It is configured by
+setting the ``V4L2_SEL_TGT_COMPOSE`` rectangle on (pad, stream) pair 0/0,
+relative to the digital crop.
 
  The sensor's output mbus code is configured by setting the format on the (pad,
-stream) pair 0/0. When setting the format, always use the same width and height
-as for the digital crop setting.
+stream) pair 0/0. The width and height fields are used to configure post-scaler
+digital crop if supported by the driver, affecting the right and bottom edges of
+the frame. If post-scaler digital crop is not supported, the width and height
+fields of the format will match the compose rectangle sizes applied on the same
+0/0 (pad, stream) pair.
 
  Drivers may only support some of even none of these configurations, in which
  case they do not expose the corresponding selection rectangles. If any selection
@@ -180,12 +187,19 @@ Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`.
        - X
        - Digital crop. This rectangle is relative to the ``V4L2_SEL_TGT_COMPOSE``
          rectangle on (pad, stream) pair 1/0.
+    * - 0/0
+      - ``V4L2_SEL_TGT_COMPOSE``
+      - \-
+      - X
+      - Scaling. This rectangle is relative to the ``V4L2_SEL_TGT_CROP``
+        rectangle on (pad, stream) pair 0/0.
      * - 0/0
        - Format

Documentation/userspace-api/media/v4l/subdev-config-model.rst Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`. · line 205

Quoted 10 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst +3 -2
        - X
        - X
-      - Image data source format. Always assign the width and height fields of
-        the format to the same values than for the ``V4L2_SEL_TGT_CROP``
+      - Image data source format and post-scaler crop. The width and height
+        fields of the format, used to configure post-scaler crop on the right
+        and bottom edges of the image, are related to the ``V4L2_SEL_TGT_COMPOSE``
          rectangle on (pad, stream) pair 0/0. The media bus code reflects the
          pixel data output of the sensor.
      * - 0/1

Why wasn't this just part of the previous patch?

Tomi

#12 lore raw

Re: [RFC v4 5/9] media: Documentation: Add scaling and post-scaler crop for common raw

Moi,

Quoted 8 lines · Tomi Valkeinen

Hi,

Quoted 3 lines · Sakari Ailus

Document scaling and post-scaler digital crop operations for the common raw sensor model.

Missing line feed, and "Signedg". checkpatch didn't complain?

Well, this is in "RFC" phase so I haven't run it through a lot of tests yet. ;) I'll fix it.

Quoted 53 lines
Quoted 40 lines
---
  .../media/v4l/subdev-config-model.rst         | 24 +++++++++++++++----
  1 file changed, 19 insertions(+), 5 deletions(-)
Documentation/userspace-api/media/v4l/subdev-config-model.rst +16 -3
index b0bd09772ceb..f15e5495cc34 100644
@@ -118,11 +118,18 @@ sub-sampling to achieve the desired size.
  The digital crop operation takes place after binning and sub-sampling. It is
  configured by setting the ``V4L2_SEL_TGT_CROP`` rectangle on (pad, stream) pair
-0/0. The resulting image size is further output by the sensor.
+0/0.
+
+The scaling operation is performed after the digital crop. It is configured by
+setting the ``V4L2_SEL_TGT_COMPOSE`` rectangle on (pad, stream) pair 0/0,
+relative to the digital crop.
  The sensor's output mbus code is configured by setting the format on the (pad,
-stream) pair 0/0. When setting the format, always use the same width and height
-as for the digital crop setting.
+stream) pair 0/0. The width and height fields are used to configure post-scaler
+digital crop if supported by the driver, affecting the right and bottom edges of
+the frame. If post-scaler digital crop is not supported, the width and height
+fields of the format will match the compose rectangle sizes applied on the same
+0/0 (pad, stream) pair.
  Drivers may only support some of even none of these configurations, in which
  case they do not expose the corresponding selection rectangles. If any selection
@@ -180,12 +187,19 @@ Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`.
        - X
        - Digital crop. This rectangle is relative to the ``V4L2_SEL_TGT_COMPOSE``
          rectangle on (pad, stream) pair 1/0.
+    * - 0/0
+      - ``V4L2_SEL_TGT_COMPOSE``
+      - \-
+      - X
+      - Scaling. This rectangle is relative to the ``V4L2_SEL_TGT_CROP``
+        rectangle on (pad, stream) pair 0/0.
      * - 0/0
        - Format

Documentation/userspace-api/media/v4l/subdev-config-model.rst Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`. · line 205

Quoted 10 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst +3 -2
        - X
        - X
-      - Image data source format. Always assign the width and height fields of
-        the format to the same values than for the ``V4L2_SEL_TGT_CROP``
+      - Image data source format and post-scaler crop. The width and height
+        fields of the format, used to configure post-scaler crop on the right
+        and bottom edges of the image, are related to the ``V4L2_SEL_TGT_COMPOSE``
          rectangle on (pad, stream) pair 0/0. The media bus code reflects the
          pixel data output of the sensor.
      * - 0/1
Quoted 1 line

Why wasn't this just part of the previous patch?

There was discussion on whether this should be part of the patches merged in the first phase or not. If so, I think it indeed should be squashed.

Signature · 3 lines
Terveisin,

Sakari Ailus
#13 lore raw

RFC v4 6/9 media: uapi: Add V4L2_CID_CONFIG_MODEL control

In reply to Sakari Ailus

Add the V4L2_CID_CONFIG_MODEL control for the configuration model.

---
 .../userspace-api/media/v4l/ext-ctrls-image-process.rst      | 4 ++++
 drivers/media/v4l2-core/v4l2-ctrls-defs.c                    | 5 +++++
 include/uapi/linux/v4l2-controls.h                           | 3 +++
 3 files changed, 12 insertions(+)
Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst +4 -0
index 27803dca8d3e..2ae17ed99729 100644
@@ -55,3 +55,7 @@ Image Process Control IDs
     control value divided by e.g. 0x100, meaning that to get no
     digital gain the control value needs to be 0x100. The no-gain
     configuration is also typically the default.
+
+``V4L2_CID_CONFIG_MODEL (bitmask)``
+    Which configuration models the sub-device supports. Please see
+    :ref:`media_subdev_config_model`. This is a read-only control.
drivers/media/v4l2-core/v4l2-ctrls-defs.c +5 -0
index 1ea52011247a..24c9c25e20d1 100644
@@ -1164,6 +1164,7 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_TEST_PATTERN:		return "Test Pattern";
 	case V4L2_CID_DEINTERLACING_MODE:	return "Deinterlacing Mode";
 	case V4L2_CID_DIGITAL_GAIN:		return "Digital Gain";
+	case V4L2_CID_CONFIG_MODEL:		return "Sub-device configuration model";
 
 	/* DV controls */
 	/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1481,6 +1482,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_DV_RX_POWER_PRESENT:
 		*type = V4L2_CTRL_TYPE_BITMASK;
 		break;
+	case V4L2_CID_CONFIG_MODEL:
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		*type = V4L2_CTRL_TYPE_BITMASK;
+		break;
 	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
 	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:
 		*type = V4L2_CTRL_TYPE_INTEGER;
include/uapi/linux/v4l2-controls.h +3 -0
index 974fd254e573..0152240229ab 100644
@@ -1225,6 +1225,9 @@ enum v4l2_jpeg_chroma_subsampling {
 #define V4L2_CID_TEST_PATTERN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
 #define V4L2_CID_DEINTERLACING_MODE		(V4L2_CID_IMAGE_PROC_CLASS_BASE + 4)
 #define V4L2_CID_DIGITAL_GAIN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 5)
+#define V4L2_CID_CONFIG_MODEL			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 6)
+
+#define V4L2_CID_CONFIG_MODEL_COMMON_RAW	(1ULL << 0)
 
 /*  DV-class control IDs defined by V4L2 */
 #define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
Signature · 1 line
2.39.5
#14 lore raw

Re: [RFC v4 6/9] media: uapi: Add V4L2_CID_CONFIG_MODEL control

Hi,

Quoted 50 lines · Sakari Ailus

Add the V4L2_CID_CONFIG_MODEL control for the configuration model.

---
  .../userspace-api/media/v4l/ext-ctrls-image-process.rst      | 4 ++++
  drivers/media/v4l2-core/v4l2-ctrls-defs.c                    | 5 +++++
  include/uapi/linux/v4l2-controls.h                           | 3 +++
  3 files changed, 12 insertions(+)
Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst +4 -0
index 27803dca8d3e..2ae17ed99729 100644
@@ -55,3 +55,7 @@ Image Process Control IDs
      control value divided by e.g. 0x100, meaning that to get no
      digital gain the control value needs to be 0x100. The no-gain
      configuration is also typically the default.
+
+``V4L2_CID_CONFIG_MODEL (bitmask)``
+    Which configuration models the sub-device supports. Please see
+    :ref:`media_subdev_config_model`. This is a read-only control.
drivers/media/v4l2-core/v4l2-ctrls-defs.c +5 -0
index 1ea52011247a..24c9c25e20d1 100644
@@ -1164,6 +1164,7 @@ const char *v4l2_ctrl_get_name(u32 id)
  	case V4L2_CID_TEST_PATTERN:		return "Test Pattern";
  	case V4L2_CID_DEINTERLACING_MODE:	return "Deinterlacing Mode";
  	case V4L2_CID_DIGITAL_GAIN:		return "Digital Gain";
+	case V4L2_CID_CONFIG_MODEL:		return "Sub-device configuration model";
 
  	/* DV controls */
  	/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1481,6 +1482,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
  	case V4L2_CID_DV_RX_POWER_PRESENT:
  		*type = V4L2_CTRL_TYPE_BITMASK;
  		break;
+	case V4L2_CID_CONFIG_MODEL:
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		*type = V4L2_CTRL_TYPE_BITMASK;
+		break;
  	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
  	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:
  		*type = V4L2_CTRL_TYPE_INTEGER;
include/uapi/linux/v4l2-controls.h +0 -0
index 974fd254e573..0152240229ab 100644

include/uapi/linux/v4l2-controls.h enum v4l2_jpeg_chroma_subsampling { · line 1230

Quoted 6 lines
include/uapi/linux/v4l2-controls.h +3 -0
@@ -1225,6 +1225,9 @@ enum v4l2_jpeg_chroma_subsampling {
  #define V4L2_CID_TEST_PATTERN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
  #define V4L2_CID_DEINTERLACING_MODE		(V4L2_CID_IMAGE_PROC_CLASS_BASE + 4)
  #define V4L2_CID_DIGITAL_GAIN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 5)
+#define V4L2_CID_CONFIG_MODEL			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 6)
+
+#define V4L2_CID_CONFIG_MODEL_COMMON_RAW	(1ULL << 0)

32 models is enough, and the subdev can support multiple models?

It sounds sensible, I guess, but do you have any ideas what the other config models might be?

We could also have just a single 32 bit int for the model, but that allows only one model per subdev. Or maybe split the 32 bit int into 4 parts, which would allow 256 models, of which a subdev can support 4.

I'm not really suggesting anything here, I just fear we don't have a clue what the other models might be and how they're used =).

Tomi

#15 lore raw

Re: [RFC v4 6/9] media: uapi: Add V4L2_CID_CONFIG_MODEL control

Moi,

Quoted 64 lines · Tomi Valkeinen

Hi,

Quoted 49 lines · Sakari Ailus

Add the V4L2_CID_CONFIG_MODEL control for the configuration model.

---
  .../userspace-api/media/v4l/ext-ctrls-image-process.rst      | 4 ++++
  drivers/media/v4l2-core/v4l2-ctrls-defs.c                    | 5 +++++
  include/uapi/linux/v4l2-controls.h                           | 3 +++
  3 files changed, 12 insertions(+)
Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst +4 -0
index 27803dca8d3e..2ae17ed99729 100644
@@ -55,3 +55,7 @@ Image Process Control IDs
      control value divided by e.g. 0x100, meaning that to get no
      digital gain the control value needs to be 0x100. The no-gain
      configuration is also typically the default.
+
+``V4L2_CID_CONFIG_MODEL (bitmask)``
+    Which configuration models the sub-device supports. Please see
+    :ref:`media_subdev_config_model`. This is a read-only control.
drivers/media/v4l2-core/v4l2-ctrls-defs.c +5 -0
index 1ea52011247a..24c9c25e20d1 100644
@@ -1164,6 +1164,7 @@ const char *v4l2_ctrl_get_name(u32 id)
  	case V4L2_CID_TEST_PATTERN:		return "Test Pattern";
  	case V4L2_CID_DEINTERLACING_MODE:	return "Deinterlacing Mode";
  	case V4L2_CID_DIGITAL_GAIN:		return "Digital Gain";
+	case V4L2_CID_CONFIG_MODEL:		return "Sub-device configuration model";
  	/* DV controls */
  	/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1481,6 +1482,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
  	case V4L2_CID_DV_RX_POWER_PRESENT:
  		*type = V4L2_CTRL_TYPE_BITMASK;
  		break;
+	case V4L2_CID_CONFIG_MODEL:
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		*type = V4L2_CTRL_TYPE_BITMASK;
+		break;
  	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
  	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:
  		*type = V4L2_CTRL_TYPE_INTEGER;
include/uapi/linux/v4l2-controls.h +0 -0
index 974fd254e573..0152240229ab 100644

include/uapi/linux/v4l2-controls.h enum v4l2_jpeg_chroma_subsampling { · line 1230

Quoted 6 lines
include/uapi/linux/v4l2-controls.h +3 -0
@@ -1225,6 +1225,9 @@ enum v4l2_jpeg_chroma_subsampling {
  #define V4L2_CID_TEST_PATTERN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
  #define V4L2_CID_DEINTERLACING_MODE		(V4L2_CID_IMAGE_PROC_CLASS_BASE + 4)
  #define V4L2_CID_DIGITAL_GAIN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 5)
+#define V4L2_CID_CONFIG_MODEL			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 6)
+
+#define V4L2_CID_CONFIG_MODEL_COMMON_RAW	(1ULL << 0)

32 models is enough, and the subdev can support multiple models?

It sounds sensible, I guess, but do you have any ideas what the other config models might be?

Quoted 6 lines

We could also have just a single 32 bit int for the model, but that allows only one model per subdev. Or maybe split the 32 bit int into 4 parts, which would allow 256 models, of which a subdev can support 4.

I'm not really suggesting anything here, I just fear we don't have a clue what the other models might be and how they're used =).

Well, I think your test pattern generator is a candidate. :-)

The bitmask control is actually 32 bits, I'll use 1U.

Signature · 3 lines
Regards,

Sakari Ailus
#16 lore raw

RFC v4 7/9 media: uapi: Add V4L2_CID_BINNING control for binning configuration

In reply to Sakari Ailus

Add V4L2_CID_BINNING control for configuting binning and enumerating a camera sensor's binning capabilities. The control combines horizontal and vertical binning into a single control as the two are generally related.

New drivers should use this control to configure binning.

---
 .../media/drivers/camera-sensor.rst           | 10 +++++++
 .../media/v4l/ext-ctrls-camera.rst            | 29 +++++++++++++++++++
 drivers/media/v4l2-core/v4l2-ctrls-defs.c     |  2 ++
 include/uapi/linux/v4l2-controls.h            |  1 +
 4 files changed, 42 insertions(+)
Documentation/userspace-api/media/drivers/camera-sensor.rst +10 -0
index 5bc4c79d230c..c6167c91f46c 100644
@@ -107,6 +107,16 @@ values programmed by the register sequences. The default values of these
 controls shall be 0 (disabled). Especially these controls shall not be inverted,
 independently of the sensor's mounting rotation.
 
+Binning
+-------
+
+Binning has traditionally been configured using :ref:`the compose selection
+rectangle <v4l2-selection-targets-table>`. The :ref:`V4L2_CID_BINNING
+<v4l2-cid-camera-sensor-binning>` is also available for binning configuration and
+users should use it when it's available. Drivers supporting the control shall
+also support the compose rectangle, albeit the rectangle may be read-only when
+the control is present.
+
 .. _media_using_camera_sensor_drivers_embedded_data:
 
 Embedded data
Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +29 -0
index cdc515c60468..18b484ff5d75 100644
@@ -672,3 +672,32 @@ enum v4l2_scene_mode -
 
     As modes differ for each sensor, menu items are not standardized by this
     control and are left to the programmer.
+
+.. _v4l2-cid-camera-sensor-binning:
+
+``V4L2_CID_BINNING_FACTORS (integer menu)``
+
+    Horizontal and vertical binning factors. Binning combines several
+    horizontal, vertical or both pixel values into a single pixel. It is a way
+    to scale an image. Binning typically produces fairly good quality output.
+
+    Determines both horizontal and vertical binning factors for a camera
+    sensor. The values are encoded in the following way:
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Bits
+      - Synopsis
+    * - 48--63
+      - Horizontal binning numerator.
+    * - 32--47
+      - Horizontal binning denominator.
+    * - 16--31
+      - Vertical binning numerator.
+    * - 0--15
+      - Vertical binning denominator.
+
+For instance, a value of ``0x0001000300020003`` indicates binning by 3
+(horizontally) * 3/2 (vertically).
drivers/media/v4l2-core/v4l2-ctrls-defs.c +2 -0
index 24c9c25e20d1..5945976b841f 100644
@@ -1087,6 +1087,7 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_CAMERA_ORIENTATION:	return "Camera Orientation";
 	case V4L2_CID_CAMERA_SENSOR_ROTATION:	return "Camera Sensor Rotation";
 	case V4L2_CID_HDR_SENSOR_MODE:		return "HDR Sensor Mode";
+	case V4L2_CID_BINNING_FACTORS:		return "Binning Factors";
 
 	/* FM Radio Modulator controls */
 	/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1424,6 +1425,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_HDR_SENSOR_MODE:
 		*type = V4L2_CTRL_TYPE_MENU;
 		break;
+	case V4L2_CID_BINNING_FACTORS:
 	case V4L2_CID_LINK_FREQ:
 		*type = V4L2_CTRL_TYPE_INTEGER_MENU;
 		break;
include/uapi/linux/v4l2-controls.h +1 -0
index 0152240229ab..8d5815a058d7 100644
@@ -1088,6 +1088,7 @@ enum v4l2_auto_focus_range {
 #define V4L2_CID_CAMERA_SENSOR_ROTATION		(V4L2_CID_CAMERA_CLASS_BASE+35)
 
 #define V4L2_CID_HDR_SENSOR_MODE		(V4L2_CID_CAMERA_CLASS_BASE+36)
+#define V4L2_CID_BINNING_FACTORS		(V4L2_CID_CAMERA_CLASS_BASE+37)
 
 /* FM Modulator class control IDs */
 
Signature · 1 line
2.39.5
Reviewed-by on v4 7/9
#17 lore raw

Re: [RFC v4 7/9] media: uapi: Add V4L2_CID_BINNING control for binning configuration

Hi,

Quoted 1 line · Sakari Ailus

Add V4L2_CID_BINNING control for configuting binning and enumerating a

"configuring".

Quoted 2 lines

camera sensor's binning capabilities. The control combines horizontal and vertical binning into a single control as the two are generally related.

It's a bit sad we need to combine different values into one control like this, but I see the benefit.

Quoted 93 lines

New drivers should use this control to configure binning.

---
  .../media/drivers/camera-sensor.rst           | 10 +++++++
  .../media/v4l/ext-ctrls-camera.rst            | 29 +++++++++++++++++++
  drivers/media/v4l2-core/v4l2-ctrls-defs.c     |  2 ++
  include/uapi/linux/v4l2-controls.h            |  1 +
  4 files changed, 42 insertions(+)
Documentation/userspace-api/media/drivers/camera-sensor.rst +10 -0
index 5bc4c79d230c..c6167c91f46c 100644
@@ -107,6 +107,16 @@ values programmed by the register sequences. The default values of these
  controls shall be 0 (disabled). Especially these controls shall not be inverted,
  independently of the sensor's mounting rotation.
 
+Binning
+-------
+
+Binning has traditionally been configured using :ref:`the compose selection
+rectangle <v4l2-selection-targets-table>`. The :ref:`V4L2_CID_BINNING
+<v4l2-cid-camera-sensor-binning>` is also available for binning configuration and
+users should use it when it's available. Drivers supporting the control shall
+also support the compose rectangle, albeit the rectangle may be read-only when
+the control is present.
+
  .. _media_using_camera_sensor_drivers_embedded_data:
 
  Embedded data
Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +29 -0
index cdc515c60468..18b484ff5d75 100644
@@ -672,3 +672,32 @@ enum v4l2_scene_mode -
 
      As modes differ for each sensor, menu items are not standardized by this
      control and are left to the programmer.
+
+.. _v4l2-cid-camera-sensor-binning:
+
+``V4L2_CID_BINNING_FACTORS (integer menu)``
+
+    Horizontal and vertical binning factors. Binning combines several
+    horizontal, vertical or both pixel values into a single pixel. It is a way
+    to scale an image. Binning typically produces fairly good quality output.
+
+    Determines both horizontal and vertical binning factors for a camera
+    sensor. The values are encoded in the following way:
+
+.. flat-table::
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Bits
+      - Synopsis
+    * - 48--63
+      - Horizontal binning numerator.
+    * - 32--47
+      - Horizontal binning denominator.
+    * - 16--31
+      - Vertical binning numerator.
+    * - 0--15
+      - Vertical binning denominator.
+
+For instance, a value of ``0x0001000300020003`` indicates binning by 3
+(horizontally) * 3/2 (vertically).
drivers/media/v4l2-core/v4l2-ctrls-defs.c +2 -0
index 24c9c25e20d1..5945976b841f 100644
@@ -1087,6 +1087,7 @@ const char *v4l2_ctrl_get_name(u32 id)
  	case V4L2_CID_CAMERA_ORIENTATION:	return "Camera Orientation";
  	case V4L2_CID_CAMERA_SENSOR_ROTATION:	return "Camera Sensor Rotation";
  	case V4L2_CID_HDR_SENSOR_MODE:		return "HDR Sensor Mode";
+	case V4L2_CID_BINNING_FACTORS:		return "Binning Factors";
 
  	/* FM Radio Modulator controls */
  	/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1424,6 +1425,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
  	case V4L2_CID_HDR_SENSOR_MODE:
  		*type = V4L2_CTRL_TYPE_MENU;
  		break;
+	case V4L2_CID_BINNING_FACTORS:
  	case V4L2_CID_LINK_FREQ:
  		*type = V4L2_CTRL_TYPE_INTEGER_MENU;
  		break;
include/uapi/linux/v4l2-controls.h +0 -0
index 0152240229ab..8d5815a058d7 100644

include/uapi/linux/v4l2-controls.h enum v4l2_auto_focus_range { · line 1094

Quoted 7 lines
include/uapi/linux/v4l2-controls.h +1 -0
@@ -1088,6 +1088,7 @@ enum v4l2_auto_focus_range {
  #define V4L2_CID_CAMERA_SENSOR_ROTATION		(V4L2_CID_CAMERA_CLASS_BASE+35)
 
  #define V4L2_CID_HDR_SENSOR_MODE		(V4L2_CID_CAMERA_CLASS_BASE+36)
+#define V4L2_CID_BINNING_FACTORS		(V4L2_CID_CAMERA_CLASS_BASE+37)
 
  /* FM Modulator class control IDs */
 

Tomi

#18 lore raw

Re: [RFC v4 7/9] media: uapi: Add V4L2_CID_BINNING control for binning configuration

Moi,

Quoted 5 lines · Tomi Valkeinen

Hi,

Quoted 1 line · Sakari Ailus

Add V4L2_CID_BINNING control for configuting binning and enumerating a

Quoted 7 lines

"configuring".

Quoted 2 lines

camera sensor's binning capabilities. The control combines horizontal and vertical binning into a single control as the two are generally related.

It's a bit sad we need to combine different values into one control like this, but I see the benefit.

Well, ideally the binning rations horizontally and vertically would be independent but that's not how it's implemented in hardware. I thought of using a specific type but I don't think it's worth it.

Signature · 3 lines
Terveisin,

Sakari Ailus
#19 lore raw

RFC v4 8/9 media: uapi: Add controls for sub-sampling configuration

In reply to Sakari Ailus

Sub-sampling is a way to decrease the data rates after the pixel array by systematically discarding some samples, either vertically or horizontally or both. Add two controls for the purpose and document them. The sub-sampling configuration is taken into account in the compose rectangle.

---
 .../userspace-api/media/drivers/camera-sensor.rst  | 14 ++++++++++++--
 .../userspace-api/media/v4l/ext-ctrls-camera.rst   | 11 +++++++++++
 drivers/media/v4l2-core/v4l2-ctrls-defs.c          |  2 ++
 include/uapi/linux/v4l2-controls.h                 |  2 ++
 4 files changed, 27 insertions(+), 2 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +12 -2
index c6167c91f46c..e65e82c5940a 100644
@@ -107,8 +107,8 @@ values programmed by the register sequences. The default values of these
 controls shall be 0 (disabled). Especially these controls shall not be inverted,
 independently of the sensor's mounting rotation.
 
-Binning
--------
+Binning and sub-sampling
+------------------------
 
 Binning has traditionally been configured using :ref:`the compose selection
 rectangle <v4l2-selection-targets-table>`. The :ref:`V4L2_CID_BINNING
@@ -117,6 +117,16 @@ users should use it when it's available. Drivers supporting the control shall
 also support the compose rectangle, albeit the rectangle may be read-only when
 the control is present.
 
+Sub-sampling is often supported as part of a camera sensor's binning
+functionality and performed after the binning operation. Sub-sampling typically
+produces quality-wise worse results than binning. Sub-sampling factors are
+independent horizontally and vertically and they are controlled using two
+controls, :ref:`V4L2_CID_SUBSAMPLING_HORIZONTAL and
+V4L2_CID_SUBSAMPLING_VERTICAL <v4l2-cid-camera-sensor-subsampling>`. In
+sub-sampling, the image size before sub-sampling is horizontally and vertically
+divided by the respective sub-sampling factors. Drivers supporting the control shall
+also reflect the sub-sampling configuration in the compose rectangle.
+
 .. _media_using_camera_sensor_drivers_embedded_data:
 
 Embedded data
Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +11 -0
index 18b484ff5d75..577b73045bee 100644
@@ -701,3 +701,14 @@ enum v4l2_scene_mode -
 
 For instance, a value of ``0x0001000300020003`` indicates binning by 3
 (horizontally) * 3/2 (vertically).
+
+.. _v4l2-cid-camera-sensor-subsampling:
+
+``V4L2_CID_SUBSAMPLING_HORIZONTAL`` and ``V4L2_CID_SUBSAMPLING_VERTICAL``
+(integer)
+
+    Horizontal and vertical subsampling factors.
+
+    Sub-sampling is used to downscale an image, horizontally and vertically, by
+    discarding a part of the image data. Typically sub-sampling produces lower
+    quality images than binning.
drivers/media/v4l2-core/v4l2-ctrls-defs.c +2 -0
index 5945976b841f..cddece2876ce 100644
@@ -1088,6 +1088,8 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_CAMERA_SENSOR_ROTATION:	return "Camera Sensor Rotation";
 	case V4L2_CID_HDR_SENSOR_MODE:		return "HDR Sensor Mode";
 	case V4L2_CID_BINNING_FACTORS:		return "Binning Factors";
+	case V4L2_CID_SUBSAMPLING_HORIZONTAL:	return "Sub-Sampling Factor, Horizontal";
+	case V4L2_CID_SUBSAMPLING_VERTICAL:	return "Sub-Sampling Factor, Vertical";
 
 	/* FM Radio Modulator controls */
 	/* Keep the order of the 'case's the same as in v4l2-controls.h! */
include/uapi/linux/v4l2-controls.h +2 -0
index 8d5815a058d7..e85747e2181b 100644
@@ -1089,6 +1089,8 @@ enum v4l2_auto_focus_range {
 
 #define V4L2_CID_HDR_SENSOR_MODE		(V4L2_CID_CAMERA_CLASS_BASE+36)
 #define V4L2_CID_BINNING_FACTORS		(V4L2_CID_CAMERA_CLASS_BASE+37)
+#define V4L2_CID_SUBSAMPLING_HORIZONTAL		(V4L2_CID_CAMERA_CLASS_BASE+38)
+#define V4L2_CID_SUBSAMPLING_VERTICAL		(V4L2_CID_CAMERA_CLASS_BASE+39)
 
 /* FM Modulator class control IDs */
 
Signature · 1 line
2.39.5
Reviewed-by on v4 8/9
#20 lore raw

Re: [RFC v4 8/9] media: uapi: Add controls for sub-sampling configuration

Hi,

Quoted 82 lines · Sakari Ailus

Sub-sampling is a way to decrease the data rates after the pixel array by systematically discarding some samples, either vertically or horizontally or both. Add two controls for the purpose and document them. The sub-sampling configuration is taken into account in the compose rectangle.

---
  .../userspace-api/media/drivers/camera-sensor.rst  | 14 ++++++++++++--
  .../userspace-api/media/v4l/ext-ctrls-camera.rst   | 11 +++++++++++
  drivers/media/v4l2-core/v4l2-ctrls-defs.c          |  2 ++
  include/uapi/linux/v4l2-controls.h                 |  2 ++
  4 files changed, 27 insertions(+), 2 deletions(-)
Documentation/userspace-api/media/drivers/camera-sensor.rst +12 -2
index c6167c91f46c..e65e82c5940a 100644
@@ -107,8 +107,8 @@ values programmed by the register sequences. The default values of these
  controls shall be 0 (disabled). Especially these controls shall not be inverted,
  independently of the sensor's mounting rotation.
 
-Binning
--------
+Binning and sub-sampling
+------------------------
 
  Binning has traditionally been configured using :ref:`the compose selection
  rectangle <v4l2-selection-targets-table>`. The :ref:`V4L2_CID_BINNING
@@ -117,6 +117,16 @@ users should use it when it's available. Drivers supporting the control shall
  also support the compose rectangle, albeit the rectangle may be read-only when
  the control is present.
 
+Sub-sampling is often supported as part of a camera sensor's binning
+functionality and performed after the binning operation. Sub-sampling typically
+produces quality-wise worse results than binning. Sub-sampling factors are
+independent horizontally and vertically and they are controlled using two
+controls, :ref:`V4L2_CID_SUBSAMPLING_HORIZONTAL and
+V4L2_CID_SUBSAMPLING_VERTICAL <v4l2-cid-camera-sensor-subsampling>`. In
+sub-sampling, the image size before sub-sampling is horizontally and vertically
+divided by the respective sub-sampling factors. Drivers supporting the control shall
+also reflect the sub-sampling configuration in the compose rectangle.
+
  .. _media_using_camera_sensor_drivers_embedded_data:
 
  Embedded data
Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +11 -0
index 18b484ff5d75..577b73045bee 100644
@@ -701,3 +701,14 @@ enum v4l2_scene_mode -
 
  For instance, a value of ``0x0001000300020003`` indicates binning by 3
  (horizontally) * 3/2 (vertically).
+
+.. _v4l2-cid-camera-sensor-subsampling:
+
+``V4L2_CID_SUBSAMPLING_HORIZONTAL`` and ``V4L2_CID_SUBSAMPLING_VERTICAL``
+(integer)
+
+    Horizontal and vertical subsampling factors.
+
+    Sub-sampling is used to downscale an image, horizontally and vertically, by
+    discarding a part of the image data. Typically sub-sampling produces lower
+    quality images than binning.
drivers/media/v4l2-core/v4l2-ctrls-defs.c +2 -0
index 5945976b841f..cddece2876ce 100644
@@ -1088,6 +1088,8 @@ const char *v4l2_ctrl_get_name(u32 id)
  	case V4L2_CID_CAMERA_SENSOR_ROTATION:	return "Camera Sensor Rotation";
  	case V4L2_CID_HDR_SENSOR_MODE:		return "HDR Sensor Mode";
  	case V4L2_CID_BINNING_FACTORS:		return "Binning Factors";
+	case V4L2_CID_SUBSAMPLING_HORIZONTAL:	return "Sub-Sampling Factor, Horizontal";
+	case V4L2_CID_SUBSAMPLING_VERTICAL:	return "Sub-Sampling Factor, Vertical";
 
  	/* FM Radio Modulator controls */
  	/* Keep the order of the 'case's the same as in v4l2-controls.h! */
include/uapi/linux/v4l2-controls.h +0 -0
index 8d5815a058d7..e85747e2181b 100644

include/uapi/linux/v4l2-controls.h enum v4l2_auto_focus_range { · line 1096

Quoted 8 lines
include/uapi/linux/v4l2-controls.h +2 -0
@@ -1089,6 +1089,8 @@ enum v4l2_auto_focus_range {
 
  #define V4L2_CID_HDR_SENSOR_MODE		(V4L2_CID_CAMERA_CLASS_BASE+36)
  #define V4L2_CID_BINNING_FACTORS		(V4L2_CID_CAMERA_CLASS_BASE+37)
+#define V4L2_CID_SUBSAMPLING_HORIZONTAL		(V4L2_CID_CAMERA_CLASS_BASE+38)
+#define V4L2_CID_SUBSAMPLING_VERTICAL		(V4L2_CID_CAMERA_CLASS_BASE+39)
 
  /* FM Modulator class control IDs */
 

Tomi

#21 lore raw

RFC v4 9/9 media: Documentation: Add binning and sub-sampling controls

In reply to Sakari Ailus

Document the binning and scaling controls (V4L2_CID_BINNING and V4L2_CID_SUBSAMPLING_{HORIZONTAL,VERTICAL}) in the common raw sensor model.

---
 .../media/v4l/subdev-config-model.rst         | 20 ++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
Documentation/userspace-api/media/v4l/subdev-config-model.rst +15 -5
index f15e5495cc34..84957dc62800 100644
@@ -113,8 +113,12 @@ separately horizontally and vertically.
 
 Binning and sub-sampling are configured using the ``V4L2_SEL_TGT_COMPOSE``
 rectangle, relative to the analogue crop rectangle, on (pad, stream) pair
-1/0. The driver implementation determines how to configure binning and
-sub-sampling to achieve the desired size.
+1/0. It depends on the driver which of these operations are being used to
+achieve the resulting size. Binning and sub-sampling are also directly
+configured using :ref:`V4L2_CID_BINNING_FACTORS
+<v4l2-cid-camera-sensor-binning>` and :ref:`V4L2_CID_SUBSAMPLING_HORIZONTAL and
+V4L2_CID_SUBSAMPLING_VERTICAL <v4l2-cid-camera-sensor-subsampling>` controls on
+drivers that support them.
 
 The digital crop operation takes place after binning and sub-sampling. It is
 configured by setting the ``V4L2_SEL_TGT_CROP`` rectangle on (pad, stream) pair
@@ -173,9 +177,15 @@ Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`.
       - \-
       - X
       - Binning and sub-sampling. This rectangle is relative to the
-        ``V4L2_SEL_TGT_CROP`` rectangle on the same (pad, stream). The
-        combination of binning and sub-sampling is configured using this
-        selection target.
+        ``V4L2_SEL_TGT_CROP`` rectangle on the same (pad, stream). Binning is
+        configured using the :ref:`V4L2_CID_BINNING_FACTORS
+        <v4l2-cid-camera-sensor-binning>` control and sub-sampling is configured
+        using the :ref:`V4L2_CID_SUBSAMPLING_HORIZONTAL and
+        V4L2_CID_SUBSAMPLING_VERTICAL <v4l2-cid-camera-sensor-subsampling>`
+        controls on drivers that support these controls. To configure binning
+        and sub-sampling on drivers that do not support these controls, the
+        selection rectangle may be changed directly to configure the combined
+        effect on the image size.
     * - 2/0
       - Format
       - X
Signature · 1 line
2.39.5
Reviewed-by on v4 9/9
#22 lore raw

Re: [RFC v4 9/9] media: Documentation: Add binning and sub-sampling controls

Hi,

Quoted 37 lines · Sakari Ailus

Document the binning and scaling controls (V4L2_CID_BINNING and V4L2_CID_SUBSAMPLING_{HORIZONTAL,VERTICAL}) in the common raw sensor model.

---
  .../media/v4l/subdev-config-model.rst         | 20 ++++++++++++++-----
  1 file changed, 15 insertions(+), 5 deletions(-)
Documentation/userspace-api/media/v4l/subdev-config-model.rst +8 -5
index f15e5495cc34..84957dc62800 100644
@@ -113,8 +113,12 @@ separately horizontally and vertically.
 
  Binning and sub-sampling are configured using the ``V4L2_SEL_TGT_COMPOSE``
  rectangle, relative to the analogue crop rectangle, on (pad, stream) pair
-1/0. The driver implementation determines how to configure binning and
-sub-sampling to achieve the desired size.
+1/0. It depends on the driver which of these operations are being used to
+achieve the resulting size. Binning and sub-sampling are also directly
+configured using :ref:`V4L2_CID_BINNING_FACTORS
+<v4l2-cid-camera-sensor-binning>` and :ref:`V4L2_CID_SUBSAMPLING_HORIZONTAL and
+V4L2_CID_SUBSAMPLING_VERTICAL <v4l2-cid-camera-sensor-subsampling>` controls on
+drivers that support them.
 
  The digital crop operation takes place after binning and sub-sampling. It is
  configured by setting the ``V4L2_SEL_TGT_CROP`` rectangle on (pad, stream) pair
@@ -173,9 +177,15 @@ Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`.
        - \-
        - X
        - Binning and sub-sampling. This rectangle is relative to the
-        ``V4L2_SEL_TGT_CROP`` rectangle on the same (pad, stream). The
-        combination of binning and sub-sampling is configured using this
-        selection target.
+        ``V4L2_SEL_TGT_CROP`` rectangle on the same (pad, stream). Binning is
+        configured using the :ref:`V4L2_CID_BINNING_FACTORS

Documentation/userspace-api/media/v4l/subdev-config-model.rst Also refer to :ref:`Selection targets <v4l2-selection-targets-table>`. · line 191

Quoted 10 lines
Documentation/userspace-api/media/v4l/subdev-config-model.rst +7 -0
+        <v4l2-cid-camera-sensor-binning>` control and sub-sampling is configured
+        using the :ref:`V4L2_CID_SUBSAMPLING_HORIZONTAL and
+        V4L2_CID_SUBSAMPLING_VERTICAL <v4l2-cid-camera-sensor-subsampling>`
+        controls on drivers that support these controls. To configure binning
+        and sub-sampling on drivers that do not support these controls, the
+        selection rectangle may be changed directly to configure the combined
+        effect on the image size.
      * - 2/0
        - Format
        - X

Tomi