arm64: dts: ti: k3-j722s-evm: Enable PMIC
Subsystems (2)
PATCH 1/1 arm64: dts: ti: k3-j722s-evm: Enable PMIC
Add support for TPS6522x PMIC family on wakeup I2C0 bus. This device provides regulators (bucks and LDOs), along with GPIOs, and monitors SOC's MCU error signal.
---
Bootlogs
https://gist.github.com/uditkumarti/961cdece09f176e1e1806efef7799cf2
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 88 +++++++++++++++++++++++++ 1 file changed, 88 insertions(+)
arch/arm64/boot/dts/ti/k3-j722s-evm.dts +88 -0
@@ -359,6 +359,13 @@ audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ >; }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x030, PIN_INPUT, 7) /* (K23) GPIO0_12 */ + >; + }; + }; &cpsw3g {
@@ -459,6 +466,87 @@ &wkup_i2c0 { clock-frequency = <400000>; status = "okay"; bootph-all; + + tps65224: pmic@48 { + compatible = "ti,tps65224-q1"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&main_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + ti,primary-pmic; + + gpio-controller; + #gpio-cells = <2>; + + buck12-supply = <&vsys_io_3v3>; + buck3-supply = <&vsys_io_3v3>; + buck4-supply = <&vsys_io_3v3>; + + ldo1-supply = <&vsys_io_3v3>; + ldo2-supply = <&vsys_io_3v3>; + ldo3-supply = <&vsys_io_3v3>; + + regulators { + + buck1: buck1 { + regulator-name = "vcc1v8_io_buck1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + bootph-all; + }; + + buck2: buck2 { + regulator-name = "vcc1v1_ddr_buck2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3: buck3 { + regulator-name = "vcc0v85_ram_buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "vcc0v75_ioret_buck4"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "vdda1v8_pll_ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "dvdd3v3_ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "vdd1v85_phy_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &k3_clks {
Signature · 1 line
2.34.1
Hi Udit Kumar,
Quoted 5 lines · Udit Kumar
Add support for TPS6522x PMIC family on wakeup I2C0 bus. This device provides regulators (bucks and LDOs), along with GPIOs, and monitors SOC's MCU error signal.
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/1] arm64: dts: ti: k3-j722s-evm: Enable PMIC
commit: 998ad09ad3b0ef1776fcb988af4916a062b92cc1
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D