configs/netcube_kumquat_defconfig: new defconfig
PATCH 1/1 configs/netcube_kumquat_defconfig: new defconfig
Signed-off-by Lukas Schmid <[email protected]>
--- DEVELOPERS | 4 + board/netcube/kumquat/genimage.cfg | 38 +++ ...NetCube-Systems-Kumquat-device-tree-.patch | 317 ++++++++++++++++++ board/netcube/kumquat/linux_defconfig | 155 +++++++++ board/netcube/kumquat/readme.txt | 71 ++++ .../rootfs/boot/extlinux/extlinux.conf | 4 + .../netcube/kumquat/rootfs/etc/fw_env.config | 11 + .../kumquat/rootfs/etc/init.d/S35esphosted | 71 ++++ .../uboot-dts/sun8i-v3s-netcube-kumquat.dts | 274 +++++++++++++++ ...init-Try-to-load-macaddr-from-eeprom.patch | 114 +++++++ board/netcube/kumquat/uboot_defconfig | 56 ++++ configs/netcube_kumquat_defconfig | 41 +++ 12 files changed, 1156 insertions(+) create mode 100644 board/netcube/kumquat/genimage.cfg create mode 100644 board/netcube/kumquat/linux-patches/0001-ARM-kumquat-add-NetCube-Systems-Kumquat-device-tree-.patch create mode 100644 board/netcube/kumquat/linux_defconfig create mode 100644 board/netcube/kumquat/readme.txt create mode 100644 board/netcube/kumquat/rootfs/boot/extlinux/extlinux.conf create mode 100644 board/netcube/kumquat/rootfs/etc/fw_env.config create mode 100755 board/netcube/kumquat/rootfs/etc/init.d/S35esphosted create mode 100644 board/netcube/kumquat/uboot-dts/sun8i-v3s-netcube-kumquat.dts create mode 100644 board/netcube/kumquat/uboot-patches/0001-eth-sunxi-board-init-Try-to-load-macaddr-from-eeprom.patch create mode 100644 board/netcube/kumquat/uboot_defconfig create mode 100644 configs/netcube_kumquat_defconfig
DEVELOPERS +4 -0
@@ -2141,6 +2141,10 @@ F: support/legal-info/ N: Lucas De Marchi <[email protected]> F: package/fswebcam/ +N: Lukas Schmid <[email protected]> +F: board/netcube/ +F: configs/netcube_kuqmuat_defconfig + N: Lubomir Rintel <[email protected]> F: board/olpc/ F: configs/olpc_xo1_defconfig
board/netcube/kumquat/genimage.cfg new file +38 -0
@@ -0,0 +1,38 @@ +flash "w25q64" { + pebsize = 65536 + lebsize = 65408 + numpebs = 128 + minimum-io-unit-size = 1 + sub-page-size = 1 + vid-header-offset = 64 +} + +image nor-flash.img { + flash {} + flashtype = "w25q64" + + partition u-boot { + image = "u-boot-sunxi-with-spl.bin" + size = 1M + } + + partition u-boot-env1 { + image = "/dev/zero" + size = 512K + } + + partition u-boot-env2 { + image = "/dev/zero" + size = 512K + } +} + +image sdcard.img { + hdimage {} + + partition rootfs { + partition-type = 0x83 + bootable = "true" + image = "rootfs.ext4" + } +}
board/netcube/kumquat/linux-patches/0001-ARM-kumquat-add-NetCube-Systems-Kumquat-device-tree-.patch new file +317 -0
317 lines not on this page · raw message
board/netcube/kumquat/linux_defconfig new file +155 -0
155 lines not on this page · raw message
board/netcube/kumquat/readme.txt new file +71 -0
71 lines not on this page · raw message
board/netcube/kumquat/rootfs/boot/extlinux/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +LABEL default + kernel /boot/zImage + fdt /boot/allwinner/sun8i-v3s-netcube-kumquat.dtb + append root=/dev/mmcblk0p1 rootwait console=${console} rootfstype=ext4 panic=3 ${mtdparts}
board/netcube/kumquat/rootfs/etc/fw_env.config new file +11 -0
@@ -0,0 +1,11 @@ +# Configuration file for fw_(printenv/setenv) utility. +# Up to two entries are valid, in this case the redundant +# environment sector is assumed present. +# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash. +# Futhermore, if the Flash sector size is omitted, this value is assumed to +# be the same as the Environment size, which is valid for NOR and SPI-dataflash +# Device offset must be prefixed with 0x to be parsed as a hexadecimal value. + +# MTD device name Device offset Env. size Flash sector size Number of sectors +/dev/mtd1 0x0000 0x40000 +/dev/mtd2 0x0000 0x40000
board/netcube/kumquat/rootfs/etc/init.d/S35esphosted new file +71 -0
71 lines not on this page · raw message
board/netcube/kumquat/uboot-dts/sun8i-v3s-netcube-kumquat.dts new file +274 -0
274 lines not on this page · raw message
board/netcube/kumquat/uboot-patches/0001-eth-sunxi-board-init-Try-to-load-macaddr-from-eeprom.patch new file +114 -0
114 lines not on this page · raw message
board/netcube/kumquat/uboot_defconfig new file +56 -0
56 lines not on this page · raw message
configs/netcube_kumquat_defconfig new file +41 -0
41 lines not on this page · raw message
Signature · 7 lines
2.47.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot