tests/qtest: Update tests using PL011 UART
v7 cover tests/qtest: Update tests using PL011 UART
(Series fully reviewed)
Since v6:
- Corrected ASM comment (Fabiano)
This series split a patch [*] which was previously posted too compact in multiple trivial steps. The last patch initializes the PL011 Control register, enabling the UART and its transmit channel, before using it to send the 'T' character in the boot-serial-test.
[*] https://lore.kernel.org/qemu-devel/[email protected]/
Philippe Mathieu-Daudé (4):
tests/qtest/boot-serial-test: Improve ASM comments of PL011 tests tests/qtest/boot-serial-test: Reduce for() loop in PL011 tests tests/qtest/boot-serial-test: Reorder pair of instructions in PL011
test
tests/qtest/boot-serial-test: Initialize PL011 Control register
tests/qtest/boot-serial-test.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)
Signature · 1 line
2.47.1
PATCH v7 1/4 tests/qtest/boot-serial-test: Improve ASM comments of PL011 tests
Re-indent ASM comments adding the 'loop:' label.
--- tests/qtest/boot-serial-test.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
tests/qtest/boot-serial-test.c +9 -9
@@ -70,18 +70,18 @@ static const uint8_t kernel_plml605[] = { };static const uint8_t bios_raspi2[] = { -0x08 ,0x30 ,0x9f ,0xe5 ,/* ldr r3,[pc,#8] Get base */ -0x54 ,0x20 ,0xa0 ,0xe3 ,/* mov r2,#'T' */ -0x00 ,0x20 ,0xc3 ,0xe5 ,/* strb r2,[r3] */ -0xfb ,0xff ,0xff ,0xea ,/* b loop */ -0x00 ,0x10 ,0x20 ,0x3f ,/* 0x3f201000 = UART0 base addr */ +0x08 ,0x30 ,0x9f ,0xe5 ,/* loop: ldr r3, [pc, #8] Get &UART0 */ +0x54 ,0x20 ,0xa0 ,0xe3 ,/* mov r2, #'T' */ +0x00 ,0x20 ,0xc3 ,0xe5 ,/* strb r2, [r3] *TXDAT = 'T' */ +0xfb ,0xff ,0xff ,0xea ,/* b -12 (loop) */ +0x00 ,0x10 ,0x20 ,0x3f ,/* UART0: 0x3f201000 */ };static const uint8_t kernel_aarch64[] = { -0x81 ,0x0a ,0x80 ,0x52 ,/* mov w1, #0x54 */ -0x02 ,0x20 ,0xa1 ,0xd2 ,/* mov x2, #0x9000000 */ -0x41 ,0x00 ,0x00 ,0x39 ,/* strb w1, [x2] */ -0xfd ,0xff ,0xff ,0x17 ,/* b -12 (loop) */ +0x81 ,0x0a ,0x80 ,0x52 ,/* loop: mov w1, #'T' */ +0x02 ,0x20 ,0xa1 ,0xd2 ,/* mov x2, #0x9000000 Load UART0 */ +0x41 ,0x00 ,0x00 ,0x39 ,/* strb w1, [x2] *TXDAT = 'T' */ +0xfd ,0xff ,0xff ,0x17 ,/* b -12 (loop) */ };static const uint8_t kernel_nrf51[] = {
Signature · 1 line
2.47.1
PATCH v7 2/4 tests/qtest/boot-serial-test: Reduce for() loop in PL011 tests
In reply to Philippe Mathieu-DaudéSince registers are not modified, we don't need to refill their values. Directly jump to the previous store instruction to keep filling the TXDAT register.
The equivalent C code remains:
while (true) {
*UART_DATA = 'T';
}--- tests/qtest/boot-serial-test.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
tests/qtest/boot-serial-test.c +6 -6
@@ -70,18 +70,18 @@ static const uint8_t kernel_plml605[] = { };static const uint8_t bios_raspi2[] = { -0x08 ,0x30 ,0x9f ,0xe5 ,/* loop: ldr r3, [pc, #8] Get &UART0 */ +0x08 ,0x30 ,0x9f ,0xe5 ,/* ldr r3, [pc, #8] Get &UART0 */ 0x54 ,0x20 ,0xa0 ,0xe3 ,/* mov r2, #'T' */ -0x00 ,0x20 ,0xc3 ,0xe5 ,/* strb r2, [r3] *TXDAT = 'T' */ -0xfb ,0xff ,0xff ,0xea ,/* b -12 (loop) */ +0x00 ,0x20 ,0xc3 ,0xe5 ,/* loop: strb r2, [r3] *TXDAT = 'T' */ +0xff ,0xff ,0xff ,0xea ,/* b -4 (loop) */ 0x00 ,0x10 ,0x20 ,0x3f ,/* UART0: 0x3f201000 */ };static const uint8_t kernel_aarch64[] = { -0x81 ,0x0a ,0x80 ,0x52 ,/* loop: mov w1, #'T' */ +0x81 ,0x0a ,0x80 ,0x52 ,/* mov w1, #'T' */ 0x02 ,0x20 ,0xa1 ,0xd2 ,/* mov x2, #0x9000000 Load UART0 */ -0x41 ,0x00 ,0x00 ,0x39 ,/* strb w1, [x2] *TXDAT = 'T' */ -0xfd ,0xff ,0xff ,0x17 ,/* b -12 (loop) */ +0x41 ,0x00 ,0x00 ,0x39 ,/* loop: strb w1, [x2] *TXDAT = 'T' */ +0xff ,0xff ,0xff ,0x17 ,/* b -4 (loop) */ };static const uint8_t kernel_nrf51[] = {
Signature · 1 line
2.47.1
PATCH v7 3/4 tests/qtest/boot-serial-test: Reorder pair of instructions in PL011 test
In reply to Philippe Mathieu-DaudéIn the next commit we are going to use a different value for the $w1 register, maintaining the same $x2 value. In order to keep the next commit trivial to review, set $x2 before $w1.
--- tests/qtest/boot-serial-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/qtest/boot-serial-test.c +1 -1
@@ -78,8 +78,8 @@ static const uint8_t bios_raspi2[] = { };static const uint8_t kernel_aarch64[] = { -0x81 ,0x0a ,0x80 ,0x52 ,/* mov w1, #'T' */ 0x02 ,0x20 ,0xa1 ,0xd2 ,/* mov x2, #0x9000000 Load UART0 */ +0x81 ,0x0a ,0x80 ,0x52 ,/* mov w1, #'T' */ 0x41 ,0x00 ,0x00 ,0x39 ,/* loop: strb w1, [x2] *TXDAT = 'T' */ 0xff ,0xff ,0xff ,0x17 ,/* b -4 (loop) */ };
Signature · 1 line
2.47.1
PATCH v7 4/4 tests/qtest/boot-serial-test: Initialize PL011 Control register
In reply to Philippe Mathieu-DaudéThe tests using the PL011 UART of the virt and raspi machines weren't properly enabling the UART and its transmitter previous to sending characters. Follow the PL011 manual initialization recommendation by setting the proper bits of the control register.
Update the ASM code prefixing:
*UART_CTRL = UART_ENABLE | TX_ENABLE;
to:
while (true) {
*UART_DATA = 'T';
}Note, since commit 51b61dd4d56 ("hw/char/pl011: Warn when using disabled transmitter") incomplete PL011 initialization can be logged using the '-d guest_errors' command line option.
--- tests/qtest/boot-serial-test.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
tests/qtest/boot-serial-test.c +6 -1
@@ -70,15 +70,20 @@ static const uint8_t kernel_plml605[] = { };static const uint8_t bios_raspi2[] = { -0x08 ,0x30 ,0x9f ,0xe5 ,/* ldr r3, [pc, #8] Get &UART0 */ +0x10 ,0x30 ,0x9f ,0xe5 ,/* ldr r3, [pc, #16] Get &UART0 */ +0x10 ,0x20 ,0x9f ,0xe5 ,/* ldr r2, [pc, #16] Get &CR */ +0xb0 ,0x23 ,0xc3 ,0xe1 ,/* strh r2, [r3, #48] Set CR */ 0x54 ,0x20 ,0xa0 ,0xe3 ,/* mov r2, #'T' */ 0x00 ,0x20 ,0xc3 ,0xe5 ,/* loop: strb r2, [r3] *TXDAT = 'T' */ 0xff ,0xff ,0xff ,0xea ,/* b -4 (loop) */ 0x00 ,0x10 ,0x20 ,0x3f ,/* UART0: 0x3f201000 */ +0x01 ,0x01 ,0x00 ,0x00 ,/* CR: 0x101 = UARTEN|TXE */ };static const uint8_t kernel_aarch64[] = {0x02 ,0x20 ,0xa1 ,0xd2 ,/* mov x2, #0x9000000 Load UART0 */ +0x21 ,0x20 ,0x80 ,0x52 ,/* mov w1, 0x101 CR = UARTEN|TXE */ +0x41 ,0x60 ,0x00 ,0x79 ,/* strh w1, [x2, #48] Set CR */ 0x81 ,0x0a ,0x80 ,0x52 ,/* mov w1, #'T' */ 0x41 ,0x00 ,0x00 ,0x39 ,/* loop: strb w1, [x2] *TXDAT = 'T' */ 0xff ,0xff ,0xff ,0x17 ,/* b -4 (loop) */
Signature · 1 line
2.47.1
Peter Maydell
AppliedQuoted 12 lines · Philippe Mathieu-Daudé
(Series fully reviewed)
Since v6:
- Corrected ASM comment (Fabiano)This series split a patch [*] which was previously posted too compact in multiple trivial steps. The last patch initializes the PL011 Control register, enabling the UART and its transmit channel, before using it to send the 'T' character in the boot-serial-test.
Quoted 8 lines
[*] https://lore.kernel.org/qemu-devel/[email protected]/
Philippe Mathieu-Daudé (4):
tests/qtest/boot-serial-test: Improve ASM comments of PL011 tests tests/qtest/boot-serial-test: Reducefor()loop in PL011 tests tests/qtest/boot-serial-test: Reorder pair of instructions in PL011
test
tests/qtest/boot-serial-test: Initialize PL011 Control register
Applied to target-arm.next, thanks.
-- PMM