Skip to contentSkip to conversation

6.1.124-rc1 review

PATCH In review Greg Kroah-Hartman 12 participants 93 messages Jan 6, 2025 – Jan 8, 2025

Subsystems (3)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 6.1.124-rc1 review

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.124-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 6.1.124-rc1

Paolo Abeni <[email protected]>
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()

Paolo Abeni <[email protected]>
mptcp: fix recvbuffer adjust on sleeping rcvmsg

Paolo Abeni <[email protected]>
mptcp: fix TCP options overflow.

Seiji Nishikawa <[email protected]>
mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim()

Yafang Shao <[email protected]>
mm/readahead: fix large folio support in async readahead

Biju Das <[email protected]>
dt-bindings: display: adi,adv7533: Drop single lane support

Biju Das <[email protected]>
drm: adv7511: Drop dsi single lane support

Nikolay Kuratov <[email protected]>
net/sctp: Prevent autoclose integer overflow in sctp_association_init()

Pascal Hambourg <[email protected]>

    sky2: Add device ID 11ab:4373 for Marvell 88E8075

Evgenii Shatokhin <[email protected]>
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking

Dan Carpenter <[email protected]>
RDMA/uverbs: Prevent integer overflow issue

Arnd Bergmann <[email protected]>
kcov: mark in_softirq_really() as __always_inline

Takashi Iwai <[email protected]>
ALSA: seq: oss: Fix races at processing SysEx messages

Daniel Schaefer <[email protected]>
ALSA hda/realtek: Add quirk for Framework F111:000C

Masahiro Yamada <[email protected]>
modpost: fix the missed iteration for the max bit in do_input()

Masahiro Yamada <[email protected]>
modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host

Michal Pecio <[email protected]>
usb: xhci: Avoid queuing redundant Stop Endpoint commands

Leon Romanovsky <[email protected]>
ARC: build: Try to guess GCC variant of cross compiler

Uros Bizjak <[email protected]>
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base

Luiz Augusto von Dentz <[email protected]>
Bluetooth: hci_core: Fix sleeping function called from invalid context

Daniele Palmas <[email protected]>
net: usb: qmi_wwan: add Telit FE910C04 compositions

Hobin Woo <[email protected]>
ksmbd: retry iterate_dir in smb2_query_dir

Anton Protopopov <[email protected]>
bpf: fix potential error return

Adrian Ratiu <[email protected]>
sound: usb: format: don't warn that raw DSD is unsupported

Adrian Ratiu <[email protected]>
sound: usb: enable DSD output for ddHiFi TC44C

Vasiliy Kovalev <[email protected]>
ALSA: hda/realtek: Add new alc2xx-fixup-headset-mic model

Filipe Manana <[email protected]>
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount

Prike Liang <[email protected]>
drm/amdkfd: Correct the migration DMA map direction

Emmanuel Grumbach <[email protected]>
wifi: mac80211: wake the queues in case of failure in resume

Filipe Manana <[email protected]>
btrfs: fix use-after-free when COWing tree bock and tracing is enabled

Filipe Manana <[email protected]>
btrfs: rename and export __btrfs_cow_block()

Eric Dumazet <[email protected]>
ila: serialize calls to nf_register_net_hooks()

Eric Dumazet <[email protected]>
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK

Eric Dumazet <[email protected]>
af_packet: fix vlan_get_tci() vs MSG_PEEK

Maciej S. Szmigiero <[email protected]>
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()

Eric Dumazet <[email protected]>
net: restrict SO_REUSEPORT to inet sockets

Willem de Bruijn <[email protected]>
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets

Li Zhijian <[email protected]>
RDMA/rtrs: Ensure 'ib_sge list' is accessible

Jinjian Song <[email protected]>
net: wwan: t7xx: Fix FSM command timeout issue

Joe Hattori <[email protected]>
net: mv643xx_eth: fix an OF node reference leak

Vitalii Mordan <[email protected]>

    eth: bcmsysport: fix call balance of priv->clk handling routines

Tanya Agarwal <[email protected]>
ALSA: usb-audio: US16x08: Initialize array before use

Antonio Pastor <[email protected]>

    net: llc: reset skb->transport_header

Pablo Neira Ayuso <[email protected]>
netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext

Rodrigo Vivi <[email protected]>
drm/i915/dg1: Fix power gate sequence.

Ilya Shchipletsov <[email protected]>
netrom: check buffer length before accessing it

Xiao Liang <[email protected]>
net: Fix netns for ip_tunnel_init_flow()

Ido Schimmel <[email protected]>
ipv4: ip_tunnel: Unmask upper DSCP bits in ip_tunnel_xmit()

Ido Schimmel <[email protected]>
ipv4: ip_tunnel: Unmask upper DSCP bits in ip_md_tunnel_xmit()

Ido Schimmel <[email protected]>
ipv4: ip_tunnel: Unmask upper DSCP bits in ip_tunnel_bind_dev()

Eric Dumazet <[email protected]>

    ip_tunnel: annotate data-races around t->parms.link

Christian Ehrig <[email protected]>
ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices

Wang Liang <[email protected]>
net: fix memory leak in tcp_conn_request()

Joe Hattori <[email protected]>
net: stmmac: restructure the error path of stmmac_probe_config_dt()

Andrew Halaney <[email protected]>
net: stmmac: don't create a MDIO bus if unnecessary

Bartosz Golaszewski <[email protected]>
net: stmmac: platform: provide devm_stmmac_probe_config_dt()

Chengchang Tang <[email protected]>
RDMA/hns: Fix missing flush CQE for DWQE

Chengchang Tang <[email protected]>
RDMA/hns: Fix warning storm caused by invalid input in IO path

wenglianfa <[email protected]>
RDMA/hns: Fix mapping error of zero-hop WQE buffer

Chengchang Tang <[email protected]>
RDMA/hns: Remove unused parameters and variables

Chengchang Tang <[email protected]>
RDMA/hns: Refactor mtr find

Tristram Ha <[email protected]>
net: dsa: microchip: Fix LAN937X set_ageing_time function

Oleksij Rempel <[email protected]>
net: dsa: microchip: add ksz_rmw8() function

Tristram Ha <[email protected]>
net: dsa: microchip: Fix KSZ9477 set_ageing_time function

Stefan Ekenberg <[email protected]>
drm/bridge: adv7511_audio: Update Audio InfoFrame properly

Selvin Xavier <[email protected]>
RDMA/bnxt_re: Fix the locking while accessing the QP table

Selvin Xavier <[email protected]>
RDMA/bnxt_re: Fix max_qp_wrs reported

Kalesh AP <[email protected]>
RDMA/bnxt_re: Fix reporting hw_ver in query_device

Saravanan Vajravel <[email protected]>
RDMA/bnxt_re: Add check for path mtu in modify_qp

Patrisious Haddad <[email protected]>
RDMA/mlx5: Enforce same type port association for multiport RoCE

Jeremy Kerr <[email protected]>
net: mctp: handle skb cleanup on sock_queue failures

Mathias Nyman <[email protected]>
xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic

Michal Pecio <[email protected]>
usb: xhci: Limit Stop Endpoint retries

Michal Pecio <[email protected]>
xhci: retry Stop Endpoint on buggy NEC controllers

Mario Limonciello <[email protected]>
thunderbolt: Don't display nvm_version unless upgrade supported

Mika Westerberg <[email protected]>
thunderbolt: Add support for Intel Panther Lake-M/P

Mika Westerberg <[email protected]>
thunderbolt: Add support for Intel Lunar Lake

Steven Rostedt <[email protected]>
tracing: Have process_string() also allow arrays

Johannes Thumshirn <[email protected]>
btrfs: fix use-after-free in btrfs_encoded_read_endio()

Thiébaud Weksteen <[email protected]>
selinux: ignore unknown extended permissions

Naman Jain <[email protected]>
x86/hyperv: Fix hv tsc page based sched_clock for hibernation

-------------

Diffstat:

 .../bindings/display/bridge/adi,adv7533.yaml       |   2 +-
 Makefile                                           |   4 +-
 arch/arc/Makefile                                  |   2 +-
 arch/x86/kernel/cpu/mshyperv.c                     |  58 ++++++++
 drivers/clocksource/hyperv_timer.c                 |  14 +-
 drivers/gpu/drm/amd/amdkfd/kfd_migrate.c           |   4 +-
 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c     |  14 +-
 drivers/gpu/drm/bridge/adv7511/adv7533.c           |   2 +-
 drivers/gpu/drm/i915/gt/intel_rc6.c                |   2 +-
 drivers/infiniband/core/uverbs_cmd.c               |  16 ++-
 drivers/infiniband/hw/bnxt_re/ib_verbs.c           |  28 ++--
 drivers/infiniband/hw/bnxt_re/qplib_fp.c           |   2 +
 drivers/infiniband/hw/bnxt_re/qplib_sp.c           |   2 +-
 drivers/infiniband/hw/hns/hns_roce_alloc.c         |   3 +-
 drivers/infiniband/hw/hns/hns_roce_cq.c            |  11 +-
 drivers/infiniband/hw/hns/hns_roce_device.h        |  12 +-
 drivers/infiniband/hw/hns/hns_roce_hem.c           |  54 +++++---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c         | 130 ++++++++---------
 drivers/infiniband/hw/hns/hns_roce_mr.c            |  95 ++++++++-----
 drivers/infiniband/hw/hns/hns_roce_qp.c            |   4 +-
 drivers/infiniband/hw/hns/hns_roce_srq.c           |   4 +-
 drivers/infiniband/hw/mlx5/main.c                  |   6 +-
 drivers/infiniband/ulp/rtrs/rtrs-srv.c             |   2 +-
 drivers/irqchip/irq-gic.c                          |   2 +-
 drivers/net/dsa/microchip/ksz9477.c                |  47 +++++--
 drivers/net/dsa/microchip/ksz9477_reg.h            |   4 +-
 drivers/net/dsa/microchip/ksz_common.h             |   5 +
 drivers/net/dsa/microchip/lan937x_main.c           |  62 ++++++++-
 drivers/net/dsa/microchip/lan937x_reg.h            |   9 +-
 drivers/net/ethernet/broadcom/bcmsysport.c         |  21 ++-
 drivers/net/ethernet/marvell/mv643xx_eth.c         |  14 +-
 drivers/net/ethernet/marvell/sky2.c                |   1 +
 .../net/ethernet/mellanox/mlxsw/spectrum_span.c    |   3 +-
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  | 153 +++++++++++++++------
 .../net/ethernet/stmicro/stmmac/stmmac_platform.h  |   2 +
 drivers/net/usb/qmi_wwan.c                         |   3 +
 drivers/net/wwan/iosm/iosm_ipc_mmio.c              |   2 +-
 drivers/net/wwan/t7xx/t7xx_state_monitor.c         |  26 ++--
 drivers/net/wwan/t7xx/t7xx_state_monitor.h         |   5 +-
 drivers/pinctrl/pinctrl-mcp23s08.c                 |   6 +
 drivers/thunderbolt/nhi.c                          |  12 ++
 drivers/thunderbolt/nhi.h                          |   6 +
 drivers/thunderbolt/retimer.c                      |  17 ++-
 drivers/usb/host/xhci-ring.c                       |  42 +++++-
 drivers/usb/host/xhci.c                            |  21 ++-
 drivers/usb/host/xhci.h                            |   2 +
 fs/btrfs/ctree.c                                   |  37 +++--
 fs/btrfs/ctree.h                                   |   7 +
 fs/btrfs/disk-io.c                                 |   9 ++
 fs/btrfs/inode.c                                   |   2 +-
 fs/smb/server/smb2pdu.c                            |  12 +-
 fs/smb/server/vfs.h                                |   1 +
 include/clocksource/hyperv_timer.h                 |   2 +
 include/linux/if_vlan.h                            |  16 ++-
 include/linux/mlx5/driver.h                        |   6 +
 include/net/bluetooth/hci_core.h                   | 108 ++++++++++-----
 include/net/ip_tunnels.h                           |  28 ++--
 include/net/netfilter/nf_tables.h                  |   7 +-
 kernel/bpf/core.c                                  |   6 +-
 kernel/kcov.c                                      |   2 +-
 kernel/trace/trace_events.c                        |  12 ++
 mm/readahead.c                                     |   6 +-
 mm/vmscan.c                                        |   9 +-
 net/bluetooth/hci_core.c                           |  10 +-
 net/bluetooth/iso.c                                |   6 +
 net/bluetooth/l2cap_core.c                         |  12 +-
 net/bluetooth/rfcomm/core.c                        |   6 +
 net/bluetooth/sco.c                                |  12 +-
 net/core/dev.c                                     |   4 +-
 net/core/sock.c                                    |   5 +-
 net/ipv4/ip_tunnel.c                               |  60 +++++---
 net/ipv4/ipip.c                                    |   1 +
 net/ipv4/tcp_input.c                               |   1 +
 net/ipv6/ila/ila_xlat.c                            |  16 ++-
 net/ipv6/sit.c                                     |   2 +-
 net/llc/llc_input.c                                |   2 +-
 net/mac80211/util.c                                |   3 +
 net/mctp/route.c                                   |  36 +++--
 net/mptcp/options.c                                |   7 +
 net/mptcp/protocol.c                               |  22 +--
 net/netrom/nr_route.c                              |   6 +
 net/packet/af_packet.c                             |  28 +---
 net/sctp/associola.c                               |   3 +-
 scripts/mod/file2alias.c                           |   4 +-
 security/selinux/ss/services.c                     |   8 +-
 sound/core/seq/oss/seq_oss_synth.c                 |   2 +
 sound/pci/hda/patch_realtek.c                      |   2 +
 sound/usb/format.c                                 |   7 +-
 sound/usb/mixer_us16x08.c                          |   2 +-
 sound/usb/quirks.c                                 |   2 +
 90 files changed, 1031 insertions(+), 444 deletions(-)
author maintainer
#1 lore raw

PATCH 1/81 x86/hyperv: Fix hv tsc page based sched_clock for hibernation

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Naman Jain <[email protected]>

commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream.

read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is bigger than the variable hv_sched_clock_offset, which is cached during early boot, but depending on the timing this assumption may be false when a hibernated VM starts again (the clock counter starts from 0 again) and is resuming back (Note: hv_init_tsc_clocksource() is not called during hibernation/resume); consequently, read_hv_sched_clock_tsc() may return a negative integer (which is interpreted as a huge positive integer since the return type is u64) and new kernel messages are prefixed with huge timestamps before read_hv_sched_clock_tsc() grows big enough (which typically takes several seconds).

Fix the issue by saving the Hyper-V clock counter just before the suspend, and using it to correct the hv_sched_clock_offset in resume. This makes hv tsc page based sched_clock continuous and ensures that post resume, it starts from where it left off during suspend. Override x86_platform.save_sched_clock_state and x86_platform.restore_sched_clock_state routines to correct this as soon as possible.

Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see __restore_processor_state() -> tsc_verify_tsc_adjust(true) and x86_platform.restore_sched_clock_state().

Fixes 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")

Message-ID: <[email protected]>

---
 arch/x86/kernel/cpu/mshyperv.c     |   58 +++++++++++++++++++++++++++++++++++++
 drivers/clocksource/hyperv_timer.c |   14 ++++++++
 include/clocksource/hyperv_timer.h |    2 +
 3 files changed, 73 insertions(+), 1 deletion(-)
arch/x86/kernel/cpu/mshyperv.c +58 -0
@@ -152,6 +152,63 @@ static void hv_machine_crash_shutdown(st
 	hyperv_cleanup();
 }
 #endif /* CONFIG_KEXEC_CORE */
+
+static u64 hv_ref_counter_at_suspend;
+static void (*old_save_sched_clock_state)(void);
+static void (*old_restore_sched_clock_state)(void);
+
+/*
+ * Hyper-V clock counter resets during hibernation. Save and restore clock
+ * offset during suspend/resume, while also considering the time passed
+ * before suspend. This is to make sure that sched_clock using hv tsc page
+ * based clocksource, proceeds from where it left off during suspend and
+ * it shows correct time for the timestamps of kernel messages after resume.
+ */
+static void save_hv_clock_tsc_state(void)
+{
+	hv_ref_counter_at_suspend = hv_read_reference_counter();
+}
+
+static void restore_hv_clock_tsc_state(void)
+{
+	/*
+	 * Adjust the offsets used by hv tsc clocksource to
+	 * account for the time spent before hibernation.
+	 * adjusted value = reference counter (time) at suspend
+	 *                - reference counter (time) now.
+	 */
+	hv_adj_sched_clock_offset(hv_ref_counter_at_suspend - hv_read_reference_counter());
+}
+
+/*
+ * Functions to override save_sched_clock_state and restore_sched_clock_state
+ * functions of x86_platform. The Hyper-V clock counter is reset during
+ * suspend-resume and the offset used to measure time needs to be
+ * corrected, post resume.
+ */
+static void hv_save_sched_clock_state(void)
+{
+	old_save_sched_clock_state();
+	save_hv_clock_tsc_state();
+}
+
+static void hv_restore_sched_clock_state(void)
+{
+	restore_hv_clock_tsc_state();
+	old_restore_sched_clock_state();
+}
+
+static void __init x86_setup_ops_for_tsc_pg_clock(void)
+{
+	if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
+		return;
+
+	old_save_sched_clock_state = x86_platform.save_sched_clock_state;
+	x86_platform.save_sched_clock_state = hv_save_sched_clock_state;
+
+	old_restore_sched_clock_state = x86_platform.restore_sched_clock_state;
+	x86_platform.restore_sched_clock_state = hv_restore_sched_clock_state;
+}
 #endif /* CONFIG_HYPERV */
 
 static uint32_t  __init ms_hyperv_platform(void)
@@ -454,6 +511,7 @@ static void __init ms_hyperv_init_platfo
 
 	/* Register Hyper-V specific clocksource */
 	hv_init_clocksource();
+	x86_setup_ops_for_tsc_pg_clock();
 #endif
 	/*
 	 * TSC should be marked as unstable only after Hyper-V
drivers/clocksource/hyperv_timer.c +13 -1
@@ -27,7 +27,8 @@
 #include <asm/mshyperv.h>
 
 static struct clock_event_device __percpu *hv_clock_event;
-static u64 hv_sched_clock_offset __ro_after_init;
+/* Note: offset can hold negative values after hibernation. */
+static u64 hv_sched_clock_offset __read_mostly;
 
 /*
  * If false, we're using the old mechanism for stimer0 interrupts
@@ -417,6 +418,17 @@ static void resume_hv_clock_tsc(struct c
 	hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
 }
 
+/*
+ * Called during resume from hibernation, from overridden
+ * x86_platform.restore_sched_clock_state routine. This is to adjust offsets
+ * used to calculate time for hv tsc page based sched_clock, to account for
+ * time spent before hibernation.
+ */
+void hv_adj_sched_clock_offset(u64 offset)
+{
+	hv_sched_clock_offset -= offset;
+}
+
 #ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
 static int hv_cs_enable(struct clocksource *cs)
 {
include/clocksource/hyperv_timer.h +2 -0
@@ -34,6 +34,8 @@ extern void hv_init_clocksource(void);
 
 extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
 
+extern void hv_adj_sched_clock_offset(u64 offset);
+
 static inline notrace u64
 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg, u64 *cur_tsc)
 {
author maintainer
#2 lore raw

PATCH 2/81 selinux: ignore unknown extended permissions

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thiébaud Weksteen <[email protected]>

commit 900f83cf376bdaf798b6f5dcb2eae0c822e908b6 upstream.

When evaluating extended permissions, ignore unknown permissions instead of calling BUG(). This commit ensures that future permissions can be added without interfering with older kernels.

Fixes fa1aa143ac4a ("selinux: extended permissions for ioctls")
---
 security/selinux/ss/services.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
security/selinux/ss/services.c +6 -2
@@ -969,7 +969,10 @@ void services_compute_xperms_decision(st
 					xpermd->driver))
 			return;
 	} else {
-		BUG();
+		pr_warn_once(
+			"SELinux: unknown extended permission (%u) will be ignored\n",
+			node->datum.u.xperms->specified);
+		return;
 	}
 
 	if (node->key.specified == AVTAB_XPERMS_ALLOWED) {
@@ -1006,7 +1009,8 @@ void services_compute_xperms_decision(st
 					node->datum.u.xperms->perms.p[i];
 		}
 	} else {
-		BUG();
+		pr_warn_once("SELinux: unknown specified key (%u)\n",
+			     node->key.specified);
 	}
 }
 
author maintainer
#3 lore raw

PATCH 3/81 btrfs: fix use-after-free in btrfs_encoded_read_endio()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Thumshirn <[email protected]>

commit 05b36b04d74a517d6675bf2f90829ff1ac7e28dc upstream.

Shinichiro reported the following use-after free that sometimes is happening in our CI system when running fstests' btrfs/284 on a TCMU runner device:

  BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
  Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219

  CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
  Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
  Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
  Call Trace:
   <TASK>
   dump_stack_lvl+0x6e/0xa0
   ? lock_release+0x708/0x780
   print_report+0x174/0x505
   ? lock_release+0x708/0x780
   ? __virt_addr_valid+0x224/0x410
   ? lock_release+0x708/0x780
   kasan_report+0xda/0x1b0
   ? lock_release+0x708/0x780
   ? __wake_up+0x44/0x60
   lock_release+0x708/0x780
   ? __pfx_lock_release+0x10/0x10
   ? __pfx_do_raw_spin_lock+0x10/0x10
   ? lock_is_held_type+0x9a/0x110
   _raw_spin_unlock_irqrestore+0x1f/0x60
   __wake_up+0x44/0x60
   btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
   btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
   ? lock_release+0x1b0/0x780
   ? trace_lock_acquire+0x12f/0x1a0
   ? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
   ? process_one_work+0x7e3/0x1460
   ? lock_acquire+0x31/0xc0
   ? process_one_work+0x7e3/0x1460
   process_one_work+0x85c/0x1460
   ? __pfx_process_one_work+0x10/0x10
   ? assign_work+0x16c/0x240
   worker_thread+0x5e6/0xfc0
   ? __pfx_worker_thread+0x10/0x10
   kthread+0x2c3/0x3a0
   ? __pfx_kthread+0x10/0x10
   ret_from_fork+0x31/0x70
   ? __pfx_kthread+0x10/0x10
   ret_from_fork_asm+0x1a/0x30
   </TASK>

  Allocated by task 3661:
   kasan_save_stack+0x30/0x50
   kasan_save_track+0x14/0x30
   __kasan_kmalloc+0xaa/0xb0
   btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
   send_extent_data+0xf0f/0x24a0 [btrfs]
   process_extent+0x48a/0x1830 [btrfs]
   changed_cb+0x178b/0x2ea0 [btrfs]
   btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
   _btrfs_ioctl_send+0x117/0x330 [btrfs]
   btrfs_ioctl+0x184a/0x60a0 [btrfs]
   __x64_sys_ioctl+0x12e/0x1a0
   do_syscall_64+0x95/0x180
   entry_SYSCALL_64_after_hwframe+0x76/0x7e

  Freed by task 3661:
   kasan_save_stack+0x30/0x50
   kasan_save_track+0x14/0x30
   kasan_save_free_info+0x3b/0x70
   __kasan_slab_free+0x4f/0x70
   kfree+0x143/0x490
   btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
   send_extent_data+0xf0f/0x24a0 [btrfs]
   process_extent+0x48a/0x1830 [btrfs]
   changed_cb+0x178b/0x2ea0 [btrfs]
   btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
   _btrfs_ioctl_send+0x117/0x330 [btrfs]
   btrfs_ioctl+0x184a/0x60a0 [btrfs]
   __x64_sys_ioctl+0x12e/0x1a0
   do_syscall_64+0x95/0x180
   entry_SYSCALL_64_after_hwframe+0x76/0x7e

  The buggy address belongs to the object at ffff888106a83f00
   which belongs to the cache kmalloc-rnd-07-96 of size 96
  The buggy address is located 24 bytes inside of
   freed 96-byte region [ffff888106a83f00, ffff888106a83f60)

  The buggy address belongs to the physical page:
  page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
  flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
  page_type: f5(slab)
  raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
  raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
   ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
  >ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                              ^
   ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
   ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ==================================================================

Further analyzing the trace and the crash dump's vmcore file shows that the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on the wait_queue that is in the private data passed to the end_io handler.

Commit 4ff47df40447 ("btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()") moved 'struct btrfs_encoded_read_private' off the stack.

Before that commit one can see a corruption of the private data when analyzing the vmcore after a crash:

*(struct btrfs_encoded_read_private *)0xffff88815626eec8 = {
	.wait = (wait_queue_head_t){
		.lock = (spinlock_t){
			.rlock = (struct raw_spinlock){
				.raw_lock = (arch_spinlock_t){
					.val = (atomic_t){
						.counter = (int)-2005885696,
					},
					.locked = (u8)0,
					.pending = (u8)157,
					.locked_pending = (u16)40192,
					.tail = (u16)34928,
				},
				.magic = (unsigned int)536325682,
				.owner_cpu = (unsigned int)29,
				.owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0,
				.dep_map = (struct lockdep_map){
					.key = (struct lock_class_key *)0xffff8881575a3b6c,
					.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
					.name = (const char *)0xffff88815626f100 = "",
					.wait_type_outer = (u8)37,
					.wait_type_inner = (u8)178,
					.lock_type = (u8)154,
				},
			},
			.__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 },
			.dep_map = (struct lockdep_map){
				.key = (struct lock_class_key *)0xffff8881575a3b6c,
				.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
				.name = (const char *)0xffff88815626f100 = "",
				.wait_type_outer = (u8)37,
				.wait_type_inner = (u8)178,
				.lock_type = (u8)154,
			},
		},
		.head = (struct list_head){
			.next = (struct list_head *)0x112cca,
			.prev = (struct list_head *)0x47,
		},
	},
	.pending = (atomic_t){
		.counter = (int)-1491499288,
	},
	.status = (blk_status_t)130,
}

Here we can see several indicators of in-memory data corruption, e.g. the large negative atomic values of ->pending or ->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic 0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus pointer values for ->wait->head.

To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the corruption, as atomic_dec_return() is defined as two instructions on x86_64, whereas atomic_dec_and_test() is defined as a single atomic operation. This can lead to a situation where counter value is already decremented but the if statement in btrfs_encoded_read_endio() is not completely processed, i.e. the 0 test has not completed. If another thread continues executing btrfs_encoded_read_regular_fill_pages() the atomic_dec_return() there can see an already updated ->pending counter and continues by freeing the private data. Continuing in the endio handler the test for 0 succeeds and the wait_queue is woken up, resulting in a use-after-free.

---
 fs/btrfs/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/inode.c +1 -1
@@ -10469,7 +10469,7 @@ static void btrfs_encoded_read_endio(str
 		 */
 		WRITE_ONCE(priv->status, status);
 	}
-	if (!atomic_dec_return(&priv->pending))
+	if (atomic_dec_and_test(&priv->pending))
 		wake_up(&priv->wait);
 	btrfs_bio_free_csum(bbio);
 	bio_put(&bbio->bio);
author maintainer
#4 lore raw

PATCH 4/81 tracing: Have process_string() also allow arrays

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <[email protected]>

commit afc6717628f959941d7b33728570568b4af1c4b8 upstream.

In order to catch a common bug where a TRACE_EVENT() TP_fast_assign() assigns an address of an allocated string to the ring buffer and then references it in TP_printk(), which can be executed hours later when the string is free, the function test_event_printk() runs on all events as they are registered to make sure there's no unwanted dereferencing.

It calls process_string() to handle cases in TP_printk() format that has "%s". It returns whether or not the string is safe. But it can have some false positives.

For instance, xe_bo_move() has:

TP_printk("move_lacks_source:%s, migrate object %p [size %zu] from %s to %s device_id:%s",

            __entry->move_lacks_source ? "yes" : "no", __entry->bo, __entry->size,
            xe_mem_type_to_name[__entry->old_placement],
            xe_mem_type_to_name[__entry->new_placement], __get_str(device_id))

Where the "%s" references into xe_mem_type_to_name[]. This is an array of pointers that should be safe for the event to access. Instead of flagging this as a bad reference, if a reference points to an array, where the record field is the index, consider it safe.

Cc Masami Hiramatsu <[email protected]>
Cc Mathieu Desnoyers <[email protected]>
Fixes 65a25d9f7ac02 ("tracing: Add "%s" check in test_event_printk()")
---
 kernel/trace/trace_events.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)
kernel/trace/trace_events.c +12 -0
@@ -359,6 +359,18 @@ static bool process_string(const char *f
 	} while (s < e);
 
 	/*
+	 * Check for arrays. If the argument has: foo[REC->val]
+	 * then it is very likely that foo is an array of strings
+	 * that are safe to use.
+	 */
+	r = strstr(s, "[");
+	if (r && r < e) {
+		r = strstr(r, "REC->");
+		if (r && r < e)
+			return true;
+	}
+
+	/*
 	 * If there's any strings in the argument consider this arg OK as it
 	 * could be: REC->field ? "foo" : "bar" and we don't want to get into
 	 * verifying that logic here.
author maintainer
#5 lore raw

PATCH 5/81 thunderbolt: Add support for Intel Lunar Lake

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <[email protected]>

[ Upstream commit 2cd3da4e37453019e21a486d9de3144f46b4fdf7 ]

Intel Lunar Lake has similar integrated Thunderbolt/USB4 controller as Intel Meteor Lake with some small differences in the host router (it has 3 DP IN adapters for instance). Add the Intel Lunar Lake PCI IDs to the driver list of supported devices.

Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P")

---
 drivers/thunderbolt/nhi.c | 4 ++++
 drivers/thunderbolt/nhi.h | 2 ++
 2 files changed, 6 insertions(+)
drivers/thunderbolt/nhi.c +4 -0
index 288aaa05d007..5301effa6ab0 100644
@@ -1479,6 +1479,10 @@ static struct pci_device_id nhi_ids[] = {
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_P_NHI1),
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_LNL_NHI0),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_LNL_NHI1),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI) },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI) },
 
drivers/thunderbolt/nhi.h +2 -0
index 0f029ce75882..7a07c7c1a9c2 100644
@@ -90,6 +90,8 @@ extern const struct tb_nhi_ops icl_nhi_ops;
 #define PCI_DEVICE_ID_INTEL_TGL_H_NHI1			0x9a21
 #define PCI_DEVICE_ID_INTEL_RPL_NHI0			0xa73e
 #define PCI_DEVICE_ID_INTEL_RPL_NHI1			0xa76d
+#define PCI_DEVICE_ID_INTEL_LNL_NHI0			0xa833
+#define PCI_DEVICE_ID_INTEL_LNL_NHI1			0xa834
 
 #define PCI_CLASS_SERIAL_USB_USB4			0x0c0340
 
Signature · 1 line
2.39.5
author maintainer
#6 lore raw

PATCH 6/81 thunderbolt: Add support for Intel Panther Lake-M/P

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <[email protected]>

[ Upstream commit 8644b48714dca8bf2f42a4ff8311de8efc9bd8c3 ]

Intel Panther Lake-M/P has the same integrated Thunderbolt/USB4 controller as Lunar Lake. Add these PCI IDs to the driver list of supported devices.

---
 drivers/thunderbolt/nhi.c | 8 ++++++++
 drivers/thunderbolt/nhi.h | 4 ++++
 2 files changed, 12 insertions(+)
drivers/thunderbolt/nhi.c +8 -0
index 5301effa6ab0..56a9222b439a 100644
@@ -1483,6 +1483,14 @@ static struct pci_device_id nhi_ids[] = {
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_LNL_NHI1),
 	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_PTL_M_NHI0),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_PTL_M_NHI1),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_PTL_P_NHI0),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_PTL_P_NHI1),
+	  .driver_data = (kernel_ulong_t)&icl_nhi_ops },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI) },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI) },
 
drivers/thunderbolt/nhi.h +4 -0
index 7a07c7c1a9c2..16744f25a9a0 100644
@@ -92,6 +92,10 @@ extern const struct tb_nhi_ops icl_nhi_ops;
 #define PCI_DEVICE_ID_INTEL_RPL_NHI1			0xa76d
 #define PCI_DEVICE_ID_INTEL_LNL_NHI0			0xa833
 #define PCI_DEVICE_ID_INTEL_LNL_NHI1			0xa834
+#define PCI_DEVICE_ID_INTEL_PTL_M_NHI0			0xe333
+#define PCI_DEVICE_ID_INTEL_PTL_M_NHI1			0xe334
+#define PCI_DEVICE_ID_INTEL_PTL_P_NHI0			0xe433
+#define PCI_DEVICE_ID_INTEL_PTL_P_NHI1			0xe434
 
 #define PCI_CLASS_SERIAL_USB_USB4			0x0c0340
 
Signature · 1 line
2.39.5
author maintainer
#7 lore raw

PATCH 7/81 thunderbolt: Dont display nvm_version unless upgrade supported

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <[email protected]>

[ Upstream commit e34f1717ef0632fcec5cb827e5e0e9f223d70c9b ]

The read will never succeed if NVM wasn't initialized due to an unknown format.

Add a new callback for visibility to only show when supported.

Fixes aef9c693e7e5 ("thunderbolt: Move vendor specific NVM handling into nvm.c")
---
 drivers/thunderbolt/retimer.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
drivers/thunderbolt/retimer.c +15 -2
index edbd92435b41..5bd5c22a5085 100644
@@ -98,6 +98,7 @@ static int tb_retimer_nvm_add(struct tb_retimer *rt)
 
 err_nvm:
 	dev_dbg(&rt->dev, "NVM upgrade disabled\n");
+	rt->no_nvm_upgrade = true;
 	if (!IS_ERR(nvm))
 		tb_nvm_free(nvm);
 
@@ -177,8 +178,6 @@ static ssize_t nvm_authenticate_show(struct device *dev,
 
 	if (!rt->nvm)
 		ret = -EAGAIN;
-	else if (rt->no_nvm_upgrade)
-		ret = -EOPNOTSUPP;
 	else
 		ret = sysfs_emit(buf, "%#x\n", rt->auth_status);
 
@@ -304,6 +303,19 @@ static ssize_t vendor_show(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RO(vendor);
 
+static umode_t retimer_is_visible(struct kobject *kobj, struct attribute *attr,
+				  int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct tb_retimer *rt = tb_to_retimer(dev);
+
+	if (attr == &dev_attr_nvm_authenticate.attr ||
+	    attr == &dev_attr_nvm_version.attr)
+		return rt->no_nvm_upgrade ? 0 : attr->mode;
+
+	return attr->mode;
+}
+
 static struct attribute *retimer_attrs[] = {
 	&dev_attr_device.attr,
 	&dev_attr_nvm_authenticate.attr,
@@ -313,6 +325,7 @@ static struct attribute *retimer_attrs[] = {
 };
 
 static const struct attribute_group retimer_group = {
+	.is_visible = retimer_is_visible,
 	.attrs = retimer_attrs,
 };
 
Signature · 1 line
2.39.5
author maintainer
#8 lore raw

PATCH 8/81 xhci: retry Stop Endpoint on buggy NEC controllers

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Pecio <[email protected]>

[ Upstream commit fd9d55d190c0e5fefd3a9165ea361809427885a1 ]

Two NEC uPD720200 adapters have been observed to randomly misbehave:
a Stop Endpoint command fails with Context Error, the Output Context indicates Stopped state, and the endpoint keeps running. Very often, Set TR Dequeue Pointer is seen to fail next with Context Error too, in addition to problems from unexpectedly completed cancelled work.

The pathology is common on fast running isoc endpoints like uvcvideo, but has also been reproduced on a full-speed bulk endpoint of pl2303. It seems all EPs are affected, with risk proportional to their load.

Reproduction involves receiving any kind of stream and closing it to make the device driver cancel URBs already queued in advance.

Deal with it by retrying the command like in the Running state.

Stable-dep-of: e21ebe51af68 ("xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic")

---
 drivers/usb/host/xhci-ring.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/usb/host/xhci-ring.c +9 -0
index 975d825091cb..d193d5ad8789 100644
@@ -1141,6 +1141,15 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 				break;
 			ep->ep_state &= ~EP_STOP_CMD_PENDING;
 			return;
+		case EP_STATE_STOPPED:
+			/*
+			 * NEC uPD720200 sometimes sets this state and fails with
+			 * Context Error while continuing to process TRBs.
+			 * Be conservative and trust EP_CTX_STATE on other chips.
+			 */
+			if (!(xhci->quirks & XHCI_NEC_HOST))
+				break;
+			fallthrough;
 		case EP_STATE_RUNNING:
 			/* Race, HW handled stop ep cmd before ep was running */
 			xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n");
Signature · 1 line
2.39.5
author maintainer
#9 lore raw

PATCH 9/81 usb: xhci: Limit Stop Endpoint retries

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Pecio <[email protected]>

[ Upstream commit 42b7581376015c1bbcbe5831f043cd0ac119d028 ]

Some host controllers fail to atomically transition an endpoint to the Running state on a doorbell ring and enter a hidden "Restarting" state, which looks very much like Stopped, with the important difference that it will spontaneously transition to Running anytime soon.

A Stop Endpoint command queued in the Restarting state typically fails with Context State Error and the completion handler sees the Endpoint Context State as either still Stopped or already Running. Even a case of Halted was observed, when an error occurred right after the restart.

The Halted state is already recovered from by resetting the endpoint. The Running state is handled by retrying Stop Endpoint.

The Stopped state was recognized as a problem on NEC controllers and worked around also by retrying, because the endpoint soon restarts and then stops for good. But there is a risk: the command may fail if the endpoint is "stopped for good" already, and retries will fail forever.

The possibility of this was not realized at the time, but a number of cases were discovered later and reproduced. Some proved difficult to deal with, and it is outright impossible to predict if an endpoint may fail to ever start at all due to a hardware bug. One such bug (albeit on ASM3142, not on NEC) was found to be reliably triggered simply by toggling an AX88179 NIC up/down in a tight loop for a few seconds.

An endless retries storm is quite nasty. Besides putting needless load on the xHC and CPU, it causes URBs never to be given back, paralyzing the device and connection/disconnection logic for the whole bus if the device is unplugged. User processes waiting for URBs become unkillable, drivers and kworker threads lock up and xhci_hcd cannot be reloaded.

For peace of mind, impose a timeout on Stop Endpoint retries in this case. If they don't succeed in 100ms, consider the endpoint stopped permanently for some reason and just give back the unlinked URBs. This failure case is rare already and work is under way to make it rarer.

Start this work today by also handling one simple case of race with Reset Endpoint, because it costs just two lines to implement.

Fixes fd9d55d190c0 ("xhci: retry Stop Endpoint on buggy NEC controllers")

Stable-dep-of: e21ebe51af68 ("xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic")

---
 drivers/usb/host/xhci-ring.c | 28 ++++++++++++++++++++++++----
 drivers/usb/host/xhci.c      |  2 ++
 drivers/usb/host/xhci.h      |  1 +
 3 files changed, 27 insertions(+), 4 deletions(-)
drivers/usb/host/xhci-ring.c +24 -4
index d193d5ad8789..4a3a8a3fa69d 100644
@@ -52,6 +52,7 @@
  *   endpoint rings; it generates events on the event ring for these.
  */
 
+#include <linux/jiffies.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
@@ -1143,16 +1144,35 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 			return;
 		case EP_STATE_STOPPED:
 			/*
-			 * NEC uPD720200 sometimes sets this state and fails with
-			 * Context Error while continuing to process TRBs.
-			 * Be conservative and trust EP_CTX_STATE on other chips.
+			 * Per xHCI 4.6.9, Stop Endpoint command on a Stopped
+			 * EP is a Context State Error, and EP stays Stopped.
+			 *
+			 * But maybe it failed on Halted, and somebody ran Reset
+			 * Endpoint later. EP state is now Stopped and EP_HALTED
+			 * still set because Reset EP handler will run after us.
+			 */
+			if (ep->ep_state & EP_HALTED)
+				break;
+			/*
+			 * On some HCs EP state remains Stopped for some tens of
+			 * us to a few ms or more after a doorbell ring, and any
+			 * new Stop Endpoint fails without aborting the restart.
+			 * This handler may run quickly enough to still see this
+			 * Stopped state, but it will soon change to Running.
+			 *
+			 * Assume this bug on unexpected Stop Endpoint failures.
+			 * Keep retrying until the EP starts and stops again, on
+			 * chips where this is known to help. Wait for 100ms.
 			 */
 			if (!(xhci->quirks & XHCI_NEC_HOST))
 				break;
+			if (time_is_before_jiffies(ep->stop_time + msecs_to_jiffies(100)))
+				break;
 			fallthrough;
 		case EP_STATE_RUNNING:
 			/* Race, HW handled stop ep cmd before ep was running */
-			xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n");
+			xhci_dbg(xhci, "Stop ep completion ctx error, ctx_state %d\n",
+					GET_EP_CTX_STATE(ep_ctx));
 
 			command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
 			if (!command) {
drivers/usb/host/xhci.c +2 -0
index b072154badf3..ae14c7ade9bc 100644
@@ -8,6 +8,7 @@
  * Some code borrowed from the Linux EHCI driver.
  */
 
+#include <linux/jiffies.h>
 #include <linux/pci.h>
 #include <linux/iommu.h>
 #include <linux/iopoll.h>
@@ -1911,6 +1912,7 @@ static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			ret = -ENOMEM;
 			goto done;
 		}
+		ep->stop_time = jiffies;
 		ep->ep_state |= EP_STOP_CMD_PENDING;
 		xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id,
 					 ep_index, 0);
drivers/usb/host/xhci.h +1 -0
index 0b526edf636f..a75b8122538d 100644
@@ -717,6 +717,7 @@ struct xhci_virt_ep {
 	/* Bandwidth checking storage */
 	struct xhci_bw_info	bw_info;
 	struct list_head	bw_endpoint_list;
+	unsigned long		stop_time;
 	/* Isoch Frame ID checking storage */
 	int			next_frame_id;
 	/* Use new Isoch TRB layout needed for extended TBC support */
Signature · 1 line
2.39.5
author maintainer
#10 lore raw

PATCH 10/81 xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <[email protected]>

[ Upstream commit e21ebe51af688eb98fd6269240212a3c7300deea ]

xHC hosts from several vendors have the same issue where endpoints start so slowly that a later queued 'Stop Endpoint' command may complete before endpoint is up and running.

The 'Stop Endpoint' command fails with context state error as the endpoint still appears as stopped.

See commit 42b758137601 ("usb: xhci: Limit Stop Endpoint retries") for details

---
 drivers/usb/host/xhci-ring.c | 2 --
 1 file changed, 2 deletions(-)
drivers/usb/host/xhci-ring.c +0 -2
index 4a3a8a3fa69d..e5b2a3b551e3 100644
@@ -1164,8 +1164,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 			 * Keep retrying until the EP starts and stops again, on
 			 * chips where this is known to help. Wait for 100ms.
 			 */
-			if (!(xhci->quirks & XHCI_NEC_HOST))
-				break;
 			if (time_is_before_jiffies(ep->stop_time + msecs_to_jiffies(100)))
 				break;
 			fallthrough;
Signature · 1 line
2.39.5
author maintainer
#11 lore raw

PATCH 11/81 net: mctp: handle skb cleanup on sock_queue failures

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeremy Kerr <[email protected]>

[ Upstream commit ce1219c3f76bb131d095e90521506d3c6ccfa086 ]

Currently, we don't use the return value from sock_queue_rcv_skb, which means we may leak skbs if a message is not successfully queued to a socket.

Instead, ensure that we're freeing the skb where the sock hasn't otherwise taken ownership of the skb by adding checks on the sock_queue_rcv_skb() to invoke a kfree on failure.

In doing so, rather than using the 'rc' value to trigger the kfree_skb(), use the skb pointer itself, which is more explicit.

Also, add a kunit test for the sock delivery failure cases.

Fixes 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly")
---
 net/mctp/route.c | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)
net/mctp/route.c +26 -10
index ea7cb9973128..e72cdd4ce588 100644
@@ -334,8 +334,13 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb)
 	msk = NULL;
 	rc = -EINVAL;
 
-	/* we may be receiving a locally-routed packet; drop source sk
-	 * accounting
+	/* We may be receiving a locally-routed packet; drop source sk
+	 * accounting.
+	 *
+	 * From here, we will either queue the skb - either to a frag_queue, or
+	 * to a receiving socket. When that succeeds, we clear the skb pointer;
+	 * a non-NULL skb on exit will be otherwise unowned, and hence
+	 * kfree_skb()-ed.
 	 */
 	skb_orphan(skb);
 
@@ -389,7 +394,9 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb)
 		 * pending key.
 		 */
 		if (flags & MCTP_HDR_FLAG_EOM) {
-			sock_queue_rcv_skb(&msk->sk, skb);
+			rc = sock_queue_rcv_skb(&msk->sk, skb);
+			if (!rc)
+				skb = NULL;
 			if (key) {
 				/* we've hit a pending reassembly; not much we
 				 * can do but drop it
@@ -398,7 +405,6 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb)
 						   MCTP_TRACE_KEY_REPLIED);
 				key = NULL;
 			}
-			rc = 0;
 			goto out_unlock;
 		}
 
@@ -425,8 +431,10 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb)
 			 * this function.
 			 */
 			rc = mctp_key_add(key, msk);
-			if (!rc)
+			if (!rc) {
 				trace_mctp_key_acquire(key);
+				skb = NULL;
+			}
 
 			/* we don't need to release key->lock on exit, so
 			 * clean up here and suppress the unlock via
@@ -444,6 +452,8 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb)
 				key = NULL;
 			} else {
 				rc = mctp_frag_queue(key, skb);
+				if (!rc)
+					skb = NULL;
 			}
 		}
 
@@ -458,12 +468,19 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb)
 		else
 			rc = mctp_frag_queue(key, skb);
 
+		if (rc)
+			goto out_unlock;
+
+		/* we've queued; the queue owns the skb now */
+		skb = NULL;
+
 		/* end of message? deliver to socket, and we're done with
 		 * the reassembly/response key
 		 */
-		if (!rc && flags & MCTP_HDR_FLAG_EOM) {
-			sock_queue_rcv_skb(key->sk, key->reasm_head);
-			key->reasm_head = NULL;
+		if (flags & MCTP_HDR_FLAG_EOM) {
+			rc = sock_queue_rcv_skb(key->sk, key->reasm_head);
+			if (!rc)
+				key->reasm_head = NULL;
 			__mctp_key_done_in(key, net, f, MCTP_TRACE_KEY_REPLIED);
 			key = NULL;
 		}
@@ -482,8 +499,7 @@ static int mctp_route_input(struct mctp_route *route, struct sk_buff *skb)
 	if (any_key)
 		mctp_key_unref(any_key);
 out:
-	if (rc)
-		kfree_skb(skb);
+	kfree_skb(skb);
 	return rc;
 }
 
Signature · 1 line
2.39.5
author maintainer
#12 lore raw

PATCH 12/81 RDMA/mlx5: Enforce same type port association for multiport RoCE

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Patrisious Haddad <[email protected]>

[ Upstream commit e05feab22fd7dabcd6d272c4e2401ec1acdfdb9b ]

Different core device types such as PFs and VFs shouldn't be affiliated together since they have different capabilities, fix that by enforcing type check before doing the affiliation.

---
 drivers/infiniband/hw/mlx5/main.c | 6 ++++--
 include/linux/mlx5/driver.h       | 6 ++++++
 2 files changed, 10 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx5/main.c +4 -2
index bce31e28eb30..45a414e8d35f 100644
@@ -3265,7 +3265,8 @@ static int mlx5_ib_init_multiport_master(struct mlx5_ib_dev *dev)
 		list_for_each_entry(mpi, &mlx5_ib_unaffiliated_port_list,
 				    list) {
 			if (dev->sys_image_guid == mpi->sys_image_guid &&
-			    (mlx5_core_native_port_num(mpi->mdev) - 1) == i) {
+			    (mlx5_core_native_port_num(mpi->mdev) - 1) == i &&
+			    mlx5_core_same_coredev_type(dev->mdev, mpi->mdev)) {
 				bound = mlx5_ib_bind_slave_port(dev, mpi);
 			}
 
@@ -4280,7 +4281,8 @@ static int mlx5r_mp_probe(struct auxiliary_device *adev,
 
 	mutex_lock(&mlx5_ib_multiport_mutex);
 	list_for_each_entry(dev, &mlx5_ib_dev_list, ib_dev_list) {
-		if (dev->sys_image_guid == mpi->sys_image_guid)
+		if (dev->sys_image_guid == mpi->sys_image_guid &&
+		    mlx5_core_same_coredev_type(dev->mdev, mpi->mdev))
 			bound = mlx5_ib_bind_slave_port(dev, mpi);
 
 		if (bound) {
include/linux/mlx5/driver.h +6 -0
index 1cae12185cf0..2588ddd3512b 100644
@@ -1212,6 +1212,12 @@ static inline bool mlx5_core_is_vf(const struct mlx5_core_dev *dev)
 	return dev->coredev_type == MLX5_COREDEV_VF;
 }
 
+static inline bool mlx5_core_same_coredev_type(const struct mlx5_core_dev *dev1,
+					       const struct mlx5_core_dev *dev2)
+{
+	return dev1->coredev_type == dev2->coredev_type;
+}
+
 static inline bool mlx5_core_is_ecpf(const struct mlx5_core_dev *dev)
 {
 	return dev->caps.embedded_cpu;
Signature · 1 line
2.39.5
author maintainer
#13 lore raw

PATCH 13/81 RDMA/bnxt_re: Add check for path mtu in modify_qp

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Saravanan Vajravel <[email protected]>

[ Upstream commit 798653a0ee30d3cd495099282751c0f248614ae7 ]

When RDMA app configures path MTU, add a check in modify_qp verb to make sure that it doesn't go beyond interface MTU. If this check fails, driver will fail the modify_qp verb.

---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 26 +++++++++++++-----------
 1 file changed, 14 insertions(+), 12 deletions(-)
drivers/infiniband/hw/bnxt_re/ib_verbs.c +14 -12
index 13102ba93847..01883d67a48e 100644
@@ -1940,18 +1940,20 @@ int bnxt_re_modify_qp(struct ib_qp *ib_qp, struct ib_qp_attr *qp_attr,
 		}
 	}
 
-	if (qp_attr_mask & IB_QP_PATH_MTU) {
-		qp->qplib_qp.modify_flags |=
-				CMDQ_MODIFY_QP_MODIFY_MASK_PATH_MTU;
-		qp->qplib_qp.path_mtu = __from_ib_mtu(qp_attr->path_mtu);
-		qp->qplib_qp.mtu = ib_mtu_enum_to_int(qp_attr->path_mtu);
-	} else if (qp_attr->qp_state == IB_QPS_RTR) {
-		qp->qplib_qp.modify_flags |=
-			CMDQ_MODIFY_QP_MODIFY_MASK_PATH_MTU;
-		qp->qplib_qp.path_mtu =
-			__from_ib_mtu(iboe_get_mtu(rdev->netdev->mtu));
-		qp->qplib_qp.mtu =
-			ib_mtu_enum_to_int(iboe_get_mtu(rdev->netdev->mtu));
+	if (qp_attr->qp_state == IB_QPS_RTR) {
+		enum ib_mtu qpmtu;
+
+		qpmtu = iboe_get_mtu(rdev->netdev->mtu);
+		if (qp_attr_mask & IB_QP_PATH_MTU) {
+			if (ib_mtu_enum_to_int(qp_attr->path_mtu) >
+			    ib_mtu_enum_to_int(qpmtu))
+				return -EINVAL;
+			qpmtu = qp_attr->path_mtu;
+		}
+
+		qp->qplib_qp.modify_flags |= CMDQ_MODIFY_QP_MODIFY_MASK_PATH_MTU;
+		qp->qplib_qp.path_mtu = __from_ib_mtu(qpmtu);
+		qp->qplib_qp.mtu = ib_mtu_enum_to_int(qpmtu);
 	}
 
 	if (qp_attr_mask & IB_QP_TIMEOUT) {
Signature · 1 line
2.39.5
author maintainer
#14 lore raw

PATCH 14/81 RDMA/bnxt_re: Fix reporting hw_ver in query_device

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kalesh AP <[email protected]>

[ Upstream commit 7179fe0074a3c962e43a9e51169304c4911989ed ]

Driver currently populates subsystem_device id in the "hw_ver" field of ib_attr structure in query_device.

Updated to populate PCI revision ID.

---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/bnxt_re/ib_verbs.c +1 -1
index 01883d67a48e..94c34ba103ea 100644
@@ -138,7 +138,7 @@ int bnxt_re_query_device(struct ib_device *ibdev,
 
 	ib_attr->vendor_id = rdev->en_dev->pdev->vendor;
 	ib_attr->vendor_part_id = rdev->en_dev->pdev->device;
-	ib_attr->hw_ver = rdev->en_dev->pdev->subsystem_device;
+	ib_attr->hw_ver = rdev->en_dev->pdev->revision;
 	ib_attr->max_qp = dev_attr->max_qp;
 	ib_attr->max_qp_wr = dev_attr->max_qp_wqes;
 	ib_attr->device_cap_flags =
Signature · 1 line
2.39.5
author maintainer
#15 lore raw

PATCH 15/81 RDMA/bnxt_re: Fix max_qp_wrs reported

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Selvin Xavier <[email protected]>

[ Upstream commit 40be32303ec829ea12f9883e499bfd3fe9e52baf ]

While creating qps, driver adds one extra entry to the sq size passed by the ULPs in order to avoid queue full condition. When ULPs creates QPs with max_qp_wr reported, driver creates QP with 1 more than the max_wqes supported by HW. Create QP fails in this case. To avoid this error, reduce 1 entry in max_qp_wqes and report it to the stack.

---
 drivers/infiniband/hw/bnxt_re/qplib_sp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/bnxt_re/qplib_sp.c +1 -1
index bae7d8926143..f59e8755f611 100644
@@ -124,7 +124,7 @@ int bnxt_qplib_get_dev_attr(struct bnxt_qplib_rcfw *rcfw,
 	attr->max_qp_init_rd_atom =
 		sb->max_qp_init_rd_atom > BNXT_QPLIB_MAX_OUT_RD_ATOM ?
 		BNXT_QPLIB_MAX_OUT_RD_ATOM : sb->max_qp_init_rd_atom;
-	attr->max_qp_wqes = le16_to_cpu(sb->max_qp_wr);
+	attr->max_qp_wqes = le16_to_cpu(sb->max_qp_wr) - 1;
 	/*
 	 * 128 WQEs needs to be reserved for the HW (8916). Prevent
 	 * reporting the max number
Signature · 1 line
2.39.5
author maintainer
#16 lore raw

PATCH 16/81 RDMA/bnxt_re: Fix the locking while accessing the QP table

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Selvin Xavier <[email protected]>

[ Upstream commit 9272cba0ded71b5a2084da3004ec7806b8cb7fd2 ]

QP table handling is synchronized with destroy QP and Async event from the HW. The same needs to be synchronized during create_qp also. Use the same lock in create_qp also.

Fixes 76d3ddff7153 ("RDMA/bnxt_re: synchronize the qp-handle table array")
Fixes f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
---
 drivers/infiniband/hw/bnxt_re/qplib_fp.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/hw/bnxt_re/qplib_fp.c +2 -0
index 7bd7ac8d52e6..23f9a48828dc 100644
@@ -1149,9 +1149,11 @@ int bnxt_qplib_create_qp(struct bnxt_qplib_res *res, struct bnxt_qplib_qp *qp)
 		rq->dbinfo.db = qp->dpi->dbr;
 		rq->dbinfo.max_slot = bnxt_qplib_set_rq_max_slot(rq->wqe_size);
 	}
+	spin_lock_bh(&rcfw->tbl_lock);
 	tbl_indx = map_qp_id_to_tbl_indx(qp->id, rcfw);
 	rcfw->qp_tbl[tbl_indx].qp_id = qp->id;
 	rcfw->qp_tbl[tbl_indx].qp_handle = (void *)qp;
+	spin_unlock_bh(&rcfw->tbl_lock);
 
 	return 0;
 fail:
Signature · 1 line
2.39.5
author maintainer
#17 lore raw

PATCH 17/81 drm/bridge: adv7511_audio: Update Audio InfoFrame properly

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Ekenberg <[email protected]>

[ Upstream commit 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 ]

AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1 while updating Audio InfoFrame information and then set to 0 when done. Otherwise partially updated Audio InfoFrames could be sent out. Two cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing AUDIO_UPDATE bit.

The problem with corrupted audio infoframes were discovered by letting a HDMI logic analyser check the output of ADV7535.

Note that this patchs replaces writing REG_GC(1) with REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field GC_PP[3:0] and that field doesn't control audio infoframe and is read- only. My conclusion therefore was that the author if this code meant to clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.

---
 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/adv7511/adv7511_audio.c +12 -2
index 61f4a38e7d2b..8f786592143b 100644
@@ -153,7 +153,16 @@ static int adv7511_hdmi_hw_params(struct device *dev, void *data,
 			   ADV7511_AUDIO_CFG3_LEN_MASK, len);
 	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
 			   ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
-	regmap_write(adv7511->regmap, 0x73, 0x1);
+
+	/* send current Audio infoframe values while updating */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
+			   BIT(5), BIT(5));
+
+	regmap_write(adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME(0), 0x1);
+
+	/* use Audio infoframe updated info */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
+			   BIT(5), 0);
 
 	return 0;
 }
@@ -184,8 +193,9 @@ static int audio_startup(struct device *dev, void *data)
 	regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0),
 				BIT(7) | BIT(6), BIT(7));
 	/* use Audio infoframe updated info */
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1),
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
 				BIT(5), 0);
+
 	/* enable SPDIF receiver */
 	if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF)
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
Signature · 1 line
2.39.5
author maintainer
#18 lore raw

PATCH 18/81 net: dsa: microchip: Fix KSZ9477 set_ageing_time function

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tristram Ha <[email protected]>

[ Upstream commit 262bfba8ab820641c8cfbbf03b86d6c00242c078 ]

The aging count is not a simple 11-bit value but comprises a 3-bit multiplier and an 8-bit second count. The code tries to use the original multiplier which is 4 as the second count is still 300 seconds by default.

Fixes 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time")
---
 drivers/net/dsa/microchip/ksz9477.c     | 47 +++++++++++++++++++------
 drivers/net/dsa/microchip/ksz9477_reg.h |  4 +--
 2 files changed, 37 insertions(+), 14 deletions(-)
drivers/net/dsa/microchip/ksz9477.c +36 -11
index e9fa92a83322..b854ee425fcd 100644
@@ -2,7 +2,7 @@
 /*
  * Microchip KSZ9477 switch driver main logic
  *
- * Copyright (C) 2017-2019 Microchip Technology Inc.
+ * Copyright (C) 2017-2024 Microchip Technology Inc.
  */
 
 #include <linux/kernel.h>
@@ -964,26 +964,51 @@ void ksz9477_get_caps(struct ksz_device *dev, int port,
 int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
 {
 	u32 secs = msecs / 1000;
-	u8 value;
-	u8 data;
+	u8 data, mult, value;
+	u32 max_val;
 	int ret;
 
-	value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs);
+#define MAX_TIMER_VAL	((1 << 8) - 1)
 
-	ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value);
-	if (ret < 0)
-		return ret;
+	/* The aging timer comprises a 3-bit multiplier and an 8-bit second
+	 * value.  Either of them cannot be zero.  The maximum timer is then
+	 * 7 * 255 = 1785 seconds.
+	 */
+	if (!secs)
+		secs = 1;
 
-	data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs);
+	/* Return error if too large. */
+	else if (secs > 7 * MAX_TIMER_VAL)
+		return -EINVAL;
 
 	ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value);
 	if (ret < 0)
 		return ret;
 
-	value &= ~SW_AGE_CNT_M;
-	value |= FIELD_PREP(SW_AGE_CNT_M, data);
+	/* Check whether there is need to update the multiplier. */
+	mult = FIELD_GET(SW_AGE_CNT_M, value);
+	max_val = MAX_TIMER_VAL;
+	if (mult > 0) {
+		/* Try to use the same multiplier already in the register as
+		 * the hardware default uses multiplier 4 and 75 seconds for
+		 * 300 seconds.
+		 */
+		max_val = DIV_ROUND_UP(secs, mult);
+		if (max_val > MAX_TIMER_VAL || max_val * mult != secs)
+			max_val = MAX_TIMER_VAL;
+	}
+
+	data = DIV_ROUND_UP(secs, max_val);
+	if (mult != data) {
+		value &= ~SW_AGE_CNT_M;
+		value |= FIELD_PREP(SW_AGE_CNT_M, data);
+		ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value);
+		if (ret < 0)
+			return ret;
+	}
 
-	return ksz_write8(dev, REG_SW_LUE_CTRL_0, value);
+	value = DIV_ROUND_UP(secs, data);
+	return ksz_write8(dev, REG_SW_LUE_CTRL_3, value);
 }
 
 void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
drivers/net/dsa/microchip/ksz9477_reg.h +1 -3
index 04086e9ab0a0..ffb9484018ed 100644
@@ -2,7 +2,7 @@
 /*
  * Microchip KSZ9477 register definitions
  *
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2024 Microchip Technology Inc.
  */
 
 #ifndef __KSZ9477_REGS_H
@@ -190,8 +190,6 @@
 #define SW_VLAN_ENABLE			BIT(7)
 #define SW_DROP_INVALID_VID		BIT(6)
 #define SW_AGE_CNT_M			GENMASK(5, 3)
-#define SW_AGE_CNT_S			3
-#define SW_AGE_PERIOD_10_8_M		GENMASK(10, 8)
 #define SW_RESV_MCAST_ENABLE		BIT(2)
 #define SW_HASH_OPTION_M		0x03
 #define SW_HASH_OPTION_CRC		1
Signature · 1 line
2.39.5
author maintainer
#19 lore raw

PATCH 19/81 net: dsa: microchip: add ksz_rmw8() function

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oleksij Rempel <[email protected]>

[ Upstream commit 6f1b986a43ce9aa67b11a7e54ac75530705d04e7 ]

Add ksz_rmw8(), it will be used in the next patch.

Stable-dep-of: bb9869043438 ("net: dsa: microchip: Fix LAN937X set_ageing_time function")

---
 drivers/net/dsa/microchip/ksz_common.h | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/dsa/microchip/ksz_common.h +5 -0
index d1b2db8e6533..a3a7a90dad96 100644
@@ -454,6 +454,11 @@ static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
 	return regmap_bulk_write(dev->regmap[2], reg, val, 2);
 }
 
+static inline int ksz_rmw8(struct ksz_device *dev, int offset, u8 mask, u8 val)
+{
+	return regmap_update_bits(dev->regmap[0], offset, mask, val);
+}
+
 static inline int ksz_pread8(struct ksz_device *dev, int port, int offset,
 			     u8 *data)
 {
Signature · 1 line
2.39.5
author maintainer
#20 lore raw

PATCH 20/81 net: dsa: microchip: Fix LAN937X set_ageing_time function

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tristram Ha <[email protected]>

[ Upstream commit bb9869043438af5b94230f94fb4c39206525d758 ]

The aging count is not a simple 20-bit value but comprises a 3-bit multiplier and a 20-bit second time. The code tries to use the original multiplier which is 4 as the second count is still 300 seconds by default.

As the 20-bit number is now too large for practical use there is an option to interpret it as microseconds instead of seconds.

Fixes 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time")
---
 drivers/net/dsa/microchip/lan937x_main.c | 62 ++++++++++++++++++++++--
 drivers/net/dsa/microchip/lan937x_reg.h  |  9 ++--
 2 files changed, 65 insertions(+), 6 deletions(-)
drivers/net/dsa/microchip/lan937x_main.c +59 -3
index 7e4f307a0387..338eff0818df 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Microchip LAN937X switch driver main logic
- * Copyright (C) 2019-2022 Microchip Technology Inc.
+ * Copyright (C) 2019-2024 Microchip Technology Inc.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -249,10 +249,66 @@ int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu)
 
 int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
 {
-	u32 secs = msecs / 1000;
-	u32 value;
+	u8 data, mult, value8;
+	bool in_msec = false;
+	u32 max_val, value;
+	u32 secs = msecs;
 	int ret;
 
+#define MAX_TIMER_VAL	((1 << 20) - 1)
+
+	/* The aging timer comprises a 3-bit multiplier and a 20-bit second
+	 * value.  Either of them cannot be zero.  The maximum timer is then
+	 * 7 * 1048575 = 7340025 seconds.  As this value is too large for
+	 * practical use it can be interpreted as microseconds, making the
+	 * maximum timer 7340 seconds with finer control.  This allows for
+	 * maximum 122 minutes compared to 29 minutes in KSZ9477 switch.
+	 */
+	if (msecs % 1000)
+		in_msec = true;
+	else
+		secs /= 1000;
+	if (!secs)
+		secs = 1;
+
+	/* Return error if too large. */
+	else if (secs > 7 * MAX_TIMER_VAL)
+		return -EINVAL;
+
+	/* Configure how to interpret the number value. */
+	ret = ksz_rmw8(dev, REG_SW_LUE_CTRL_2, SW_AGE_CNT_IN_MICROSEC,
+		       in_msec ? SW_AGE_CNT_IN_MICROSEC : 0);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value8);
+	if (ret < 0)
+		return ret;
+
+	/* Check whether there is need to update the multiplier. */
+	mult = FIELD_GET(SW_AGE_CNT_M, value8);
+	max_val = MAX_TIMER_VAL;
+	if (mult > 0) {
+		/* Try to use the same multiplier already in the register as
+		 * the hardware default uses multiplier 4 and 75 seconds for
+		 * 300 seconds.
+		 */
+		max_val = DIV_ROUND_UP(secs, mult);
+		if (max_val > MAX_TIMER_VAL || max_val * mult != secs)
+			max_val = MAX_TIMER_VAL;
+	}
+
+	data = DIV_ROUND_UP(secs, max_val);
+	if (mult != data) {
+		value8 &= ~SW_AGE_CNT_M;
+		value8 |= FIELD_PREP(SW_AGE_CNT_M, data);
+		ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value8);
+		if (ret < 0)
+			return ret;
+	}
+
+	secs = DIV_ROUND_UP(secs, data);
+
 	value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs);
 
 	ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value);
drivers/net/dsa/microchip/lan937x_reg.h +6 -3
index 5bc16a4c4441..f36ef2ce4065 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /* Microchip LAN937X switch register definitions
- * Copyright (C) 2019-2021 Microchip Technology Inc.
+ * Copyright (C) 2019-2024 Microchip Technology Inc.
  */
 #ifndef __LAN937X_REG_H
 #define __LAN937X_REG_H
@@ -48,8 +48,7 @@
 
 #define SW_VLAN_ENABLE			BIT(7)
 #define SW_DROP_INVALID_VID		BIT(6)
-#define SW_AGE_CNT_M			0x7
-#define SW_AGE_CNT_S			3
+#define SW_AGE_CNT_M			GENMASK(5, 3)
 #define SW_RESV_MCAST_ENABLE		BIT(2)
 
 #define REG_SW_LUE_CTRL_1		0x0311
@@ -62,6 +61,10 @@
 #define SW_FAST_AGING			BIT(1)
 #define SW_LINK_AUTO_AGING		BIT(0)
 
+#define REG_SW_LUE_CTRL_2		0x0312
+
+#define SW_AGE_CNT_IN_MICROSEC		BIT(7)
+
 #define REG_SW_AGE_PERIOD__1		0x0313
 #define SW_AGE_PERIOD_7_0_M		GENMASK(7, 0)
 
Signature · 1 line
2.39.5
author maintainer
#21 lore raw

PATCH 21/81 RDMA/hns: Refactor mtr find

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chengchang Tang <[email protected]>

[ Upstream commit a4ca341080758d847db155b97887bff6f84016a4 ]

hns_roce_mtr_find() is a collection of multiple functions, and the return value is also difficult to understand, which is not conducive to modification and maintenance.

Separate the function of obtaining MTR root BA from this function. And some adjustments has been made to improve readability.

Stable-dep-of: 8673a6c2d9e4 ("RDMA/hns: Fix mapping error of zero-hop WQE buffer")

---
 drivers/infiniband/hw/hns/hns_roce_cq.c     |  11 +--
 drivers/infiniband/hw/hns/hns_roce_device.h |   7 +-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c  | 102 ++++++++++----------
 drivers/infiniband/hw/hns/hns_roce_mr.c     |  86 +++++++++++------
 4 files changed, 121 insertions(+), 85 deletions(-)
drivers/infiniband/hw/hns/hns_roce_cq.c +5 -6
index 9b91731a6207..5e0d78f4e545 100644
@@ -133,14 +133,12 @@ static int alloc_cqc(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
 	struct hns_roce_cq_table *cq_table = &hr_dev->cq_table;
 	struct ib_device *ibdev = &hr_dev->ib_dev;
 	u64 mtts[MTT_MIN_COUNT] = {};
-	dma_addr_t dma_handle;
 	int ret;
 
-	ret = hns_roce_mtr_find(hr_dev, &hr_cq->mtr, 0, mtts, ARRAY_SIZE(mtts),
-				&dma_handle);
-	if (!ret) {
+	ret = hns_roce_mtr_find(hr_dev, &hr_cq->mtr, 0, mtts, ARRAY_SIZE(mtts));
+	if (ret) {
 		ibdev_err(ibdev, "failed to find CQ mtr, ret = %d.\n", ret);
-		return -EINVAL;
+		return ret;
 	}
 
 	/* Get CQC memory HEM(Hardware Entry Memory) table */
@@ -157,7 +155,8 @@ static int alloc_cqc(struct hns_roce_dev *hr_dev, struct hns_roce_cq *hr_cq)
 		goto err_put;
 	}
 
-	ret = hns_roce_create_cqc(hr_dev, hr_cq, mtts, dma_handle);
+	ret = hns_roce_create_cqc(hr_dev, hr_cq, mtts,
+				  hns_roce_get_mtr_ba(&hr_cq->mtr));
 	if (ret)
 		goto err_xa;
 
drivers/infiniband/hw/hns/hns_roce_device.h +6 -1
index 5b8b68b2d69c..461008bf0fcf 100644
@@ -1117,8 +1117,13 @@ void hns_roce_cmd_use_polling(struct hns_roce_dev *hr_dev);
 
 /* hns roce hw need current block and next block addr from mtt */
 #define MTT_MIN_COUNT	 2
+static inline dma_addr_t hns_roce_get_mtr_ba(struct hns_roce_mtr *mtr)
+{
+	return mtr->hem_cfg.root_ba;
+}
+
 int hns_roce_mtr_find(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
-		      u32 offset, u64 *mtt_buf, int mtt_max, u64 *base_addr);
+		      u32 offset, u64 *mtt_buf, int mtt_max);
 int hns_roce_mtr_create(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 			struct hns_roce_buf_attr *buf_attr,
 			unsigned int page_shift, struct ib_udata *udata,
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +53 -49

190 lines not on this page · raw message

drivers/infiniband/hw/hns/hns_roce_mr.c +57 -29

115 lines not on this page · raw message

Signature · 1 line
2.39.5
author maintainer
#22 lore raw

PATCH 22/81 RDMA/hns: Remove unused parameters and variables

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chengchang Tang <[email protected]>

[ Upstream commit f4caa864af84f801a5821ea2ba6c1cc46f8252c1 ]

Remove unused parameters and variables.

Stable-dep-of: 8673a6c2d9e4 ("RDMA/hns: Fix mapping error of zero-hop WQE buffer")

---
 drivers/infiniband/hw/hns/hns_roce_alloc.c  |  3 +--
 drivers/infiniband/hw/hns/hns_roce_device.h |  5 ++---
 drivers/infiniband/hw/hns/hns_roce_hem.c    | 13 +++++--------
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c  | 20 +++++++-------------
 drivers/infiniband/hw/hns/hns_roce_mr.c     |  4 ++--
 drivers/infiniband/hw/hns/hns_roce_qp.c     |  4 +---
 drivers/infiniband/hw/hns/hns_roce_srq.c    |  4 ++--
 7 files changed, 20 insertions(+), 33 deletions(-)
drivers/infiniband/hw/hns/hns_roce_alloc.c +1 -2
index 11a78ceae568..950c133d4220 100644
@@ -153,8 +153,7 @@ int hns_roce_get_kmem_bufs(struct hns_roce_dev *hr_dev, dma_addr_t *bufs,
 	return total;
 }
 
-int hns_roce_get_umem_bufs(struct hns_roce_dev *hr_dev, dma_addr_t *bufs,
-			   int buf_cnt, struct ib_umem *umem,
+int hns_roce_get_umem_bufs(dma_addr_t *bufs, int buf_cnt, struct ib_umem *umem,
 			   unsigned int page_shift)
 {
 	struct ib_block_iter biter;
drivers/infiniband/hw/hns/hns_roce_device.h +2 -3
index 461008bf0fcf..060797001353 100644
@@ -882,8 +882,7 @@ struct hns_roce_hw {
 	int (*rereg_write_mtpt)(struct hns_roce_dev *hr_dev,
 				struct hns_roce_mr *mr, int flags,
 				void *mb_buf);
-	int (*frmr_write_mtpt)(struct hns_roce_dev *hr_dev, void *mb_buf,
-			       struct hns_roce_mr *mr);
+	int (*frmr_write_mtpt)(void *mb_buf, struct hns_roce_mr *mr);
 	int (*mw_write_mtpt)(void *mb_buf, struct hns_roce_mw *mw);
 	void (*write_cqc)(struct hns_roce_dev *hr_dev,
 			  struct hns_roce_cq *hr_cq, void *mb_buf, u64 *mtts,
@@ -1182,7 +1181,7 @@ struct hns_roce_buf *hns_roce_buf_alloc(struct hns_roce_dev *hr_dev, u32 size,
 int hns_roce_get_kmem_bufs(struct hns_roce_dev *hr_dev, dma_addr_t *bufs,
 			   int buf_cnt, struct hns_roce_buf *buf,
 			   unsigned int page_shift);
-int hns_roce_get_umem_bufs(struct hns_roce_dev *hr_dev, dma_addr_t *bufs,
+int hns_roce_get_umem_bufs(dma_addr_t *bufs,
 			   int buf_cnt, struct ib_umem *umem,
 			   unsigned int page_shift);
 
drivers/infiniband/hw/hns/hns_roce_hem.c +5 -8
index f605eb8fd13a..6e0ca8a4b2a8 100644
@@ -1043,15 +1043,13 @@ static void hem_list_free_all(struct hns_roce_dev *hr_dev,
 	}
 }
 
-static void hem_list_link_bt(struct hns_roce_dev *hr_dev, void *base_addr,
-			     u64 table_addr)
+static void hem_list_link_bt(void *base_addr, u64 table_addr)
 {
 	*(u64 *)(base_addr) = table_addr;
 }
 
 /* assign L0 table address to hem from root bt */
-static void hem_list_assign_bt(struct hns_roce_dev *hr_dev,
-			       struct hns_roce_hem_item *hem, void *cpu_addr,
+static void hem_list_assign_bt(struct hns_roce_hem_item *hem, void *cpu_addr,
 			       u64 phy_addr)
 {
 	hem->addr = cpu_addr;
@@ -1222,8 +1220,7 @@ static int hem_list_alloc_mid_bt(struct hns_roce_dev *hr_dev,
 		if (level > 1) {
 			pre = hem_ptrs[level - 1];
 			step = (cur->start - pre->start) / step * BA_BYTE_LEN;
-			hem_list_link_bt(hr_dev, pre->addr + step,
-					 cur->dma_addr);
+			hem_list_link_bt(pre->addr + step, cur->dma_addr);
 		}
 	}
 
@@ -1281,7 +1278,7 @@ static int alloc_fake_root_bt(struct hns_roce_dev *hr_dev, void *cpu_base,
 	if (!hem)
 		return -ENOMEM;
 
-	hem_list_assign_bt(hr_dev, hem, cpu_base, phy_base);
+	hem_list_assign_bt(hem, cpu_base, phy_base);
 	list_add(&hem->list, branch_head);
 	list_add(&hem->sibling, leaf_head);
 
@@ -1304,7 +1301,7 @@ static int setup_middle_bt(struct hns_roce_dev *hr_dev, void *cpu_base,
 	/* if exist mid bt, link L1 to L0 */
 	list_for_each_entry_safe(hem, temp_hem, branch_head, list) {
 		offset = (hem->start - r->offset) / step * BA_BYTE_LEN;
-		hem_list_link_bt(hr_dev, cpu_base + offset, hem->dma_addr);
+		hem_list_link_bt(cpu_base + offset, hem->dma_addr);
 		total++;
 	}
 
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +7 -13
index 105ad0aec922..60628ef1c46e 100644
@@ -3400,8 +3400,7 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev,
 	return ret;
 }
 
-static int hns_roce_v2_frmr_write_mtpt(struct hns_roce_dev *hr_dev,
-				       void *mb_buf, struct hns_roce_mr *mr)
+static int hns_roce_v2_frmr_write_mtpt(void *mb_buf, struct hns_roce_mr *mr)
 {
 	dma_addr_t pbl_ba = hns_roce_get_mtr_ba(&mr->pbl_mtr);
 	struct hns_roce_v2_mpt_entry *mpt_entry;
@@ -4367,8 +4366,7 @@ static void set_access_flags(struct hns_roce_qp *hr_qp,
 }
 
 static void set_qpc_wqe_cnt(struct hns_roce_qp *hr_qp,
-			    struct hns_roce_v2_qp_context *context,
-			    struct hns_roce_v2_qp_context *qpc_mask)
+			    struct hns_roce_v2_qp_context *context)
 {
 	hr_reg_write(context, QPC_SGE_SHIFT,
 		     to_hr_hem_entries_shift(hr_qp->sge.sge_cnt,
@@ -4390,7 +4388,6 @@ static inline int get_pdn(struct ib_pd *ib_pd)
 }
 
 static void modify_qp_reset_to_init(struct ib_qp *ibqp,
-				    const struct ib_qp_attr *attr,
 				    struct hns_roce_v2_qp_context *context,
 				    struct hns_roce_v2_qp_context *qpc_mask)
 {
@@ -4409,7 +4406,7 @@ static void modify_qp_reset_to_init(struct ib_qp *ibqp,
 
 	hr_reg_write(context, QPC_RQWS, ilog2(hr_qp->rq.max_gs));
 
-	set_qpc_wqe_cnt(hr_qp, context, qpc_mask);
+	set_qpc_wqe_cnt(hr_qp, context);
 
 	/* No VLAN need to set 0xFFF */
 	hr_reg_write(context, QPC_VLAN_ID, 0xfff);
@@ -4454,7 +4451,6 @@ static void modify_qp_reset_to_init(struct ib_qp *ibqp,
 }
 
 static void modify_qp_init_to_init(struct ib_qp *ibqp,
-				   const struct ib_qp_attr *attr,
 				   struct hns_roce_v2_qp_context *context,
 				   struct hns_roce_v2_qp_context *qpc_mask)
 {
@@ -4752,8 +4748,7 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,
 	return 0;
 }
 
-static int modify_qp_rtr_to_rts(struct ib_qp *ibqp,
-				const struct ib_qp_attr *attr, int attr_mask,
+static int modify_qp_rtr_to_rts(struct ib_qp *ibqp, int attr_mask,
 				struct hns_roce_v2_qp_context *context,
 				struct hns_roce_v2_qp_context *qpc_mask)
 {
@@ -5121,15 +5116,14 @@ static int hns_roce_v2_set_abs_fields(struct ib_qp *ibqp,
 
 	if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) {
 		memset(qpc_mask, 0, hr_dev->caps.qpc_sz);
-		modify_qp_reset_to_init(ibqp, attr, context, qpc_mask);
+		modify_qp_reset_to_init(ibqp, context, qpc_mask);
 	} else if (cur_state == IB_QPS_INIT && new_state == IB_QPS_INIT) {
-		modify_qp_init_to_init(ibqp, attr, context, qpc_mask);
+		modify_qp_init_to_init(ibqp, context, qpc_mask);
 	} else if (cur_state == IB_QPS_INIT && new_state == IB_QPS_RTR) {
 		ret = modify_qp_init_to_rtr(ibqp, attr, attr_mask, context,
 					    qpc_mask);
 	} else if (cur_state == IB_QPS_RTR && new_state == IB_QPS_RTS) {
-		ret = modify_qp_rtr_to_rts(ibqp, attr, attr_mask, context,
-					   qpc_mask);
+		ret = modify_qp_rtr_to_rts(ibqp, attr_mask, context, qpc_mask);
 	}
 
 	return ret;
drivers/infiniband/hw/hns/hns_roce_mr.c +2 -2
index 7b59b95f87c2..acdcd5c9f42f 100644
@@ -154,7 +154,7 @@ static int hns_roce_mr_enable(struct hns_roce_dev *hr_dev,
 	if (mr->type != MR_TYPE_FRMR)
 		ret = hr_dev->hw->write_mtpt(hr_dev, mailbox->buf, mr);
 	else
-		ret = hr_dev->hw->frmr_write_mtpt(hr_dev, mailbox->buf, mr);
+		ret = hr_dev->hw->frmr_write_mtpt(mailbox->buf, mr);
 	if (ret) {
 		dev_err(dev, "failed to write mtpt, ret = %d.\n", ret);
 		goto err_page;
@@ -714,7 +714,7 @@ static int mtr_map_bufs(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 		return -ENOMEM;
 
 	if (mtr->umem)
-		npage = hns_roce_get_umem_bufs(hr_dev, pages, page_count,
+		npage = hns_roce_get_umem_bufs(pages, page_count,
 					       mtr->umem, page_shift);
 	else
 		npage = hns_roce_get_kmem_bufs(hr_dev, pages, page_count,
drivers/infiniband/hw/hns/hns_roce_qp.c +1 -3
index 7af663176104..19136cb16960 100644
@@ -1139,7 +1139,6 @@ static int set_qp_param(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp,
 }
 
 static int hns_roce_create_qp_common(struct hns_roce_dev *hr_dev,
-				     struct ib_pd *ib_pd,
 				     struct ib_qp_init_attr *init_attr,
 				     struct ib_udata *udata,
 				     struct hns_roce_qp *hr_qp)
@@ -1293,7 +1292,6 @@ int hns_roce_create_qp(struct ib_qp *qp, struct ib_qp_init_attr *init_attr,
 	struct ib_device *ibdev = qp->device;
 	struct hns_roce_dev *hr_dev = to_hr_dev(ibdev);
 	struct hns_roce_qp *hr_qp = to_hr_qp(qp);
-	struct ib_pd *pd = qp->pd;
 	int ret;
 
 	ret = check_qp_type(hr_dev, init_attr->qp_type, !!udata);
@@ -1308,7 +1306,7 @@ int hns_roce_create_qp(struct ib_qp *qp, struct ib_qp_init_attr *init_attr,
 		hr_qp->phy_port = hr_dev->iboe.phy_port[hr_qp->port];
 	}
 
-	ret = hns_roce_create_qp_common(hr_dev, pd, init_attr, udata, hr_qp);
+	ret = hns_roce_create_qp_common(hr_dev, init_attr, udata, hr_qp);
 	if (ret)
 		ibdev_err(ibdev, "create QP type 0x%x failed(%d)\n",
 			  init_attr->qp_type, ret);
drivers/infiniband/hw/hns/hns_roce_srq.c +2 -2
index 652508b660a0..80fcb1b0e8fd 100644
@@ -249,7 +249,7 @@ static void free_srq_wqe_buf(struct hns_roce_dev *hr_dev,
 	hns_roce_mtr_destroy(hr_dev, &srq->buf_mtr);
 }
 
-static int alloc_srq_wrid(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq)
+static int alloc_srq_wrid(struct hns_roce_srq *srq)
 {
 	srq->wrid = kvmalloc_array(srq->wqe_cnt, sizeof(u64), GFP_KERNEL);
 	if (!srq->wrid)
@@ -365,7 +365,7 @@ static int alloc_srq_buf(struct hns_roce_dev *hr_dev, struct hns_roce_srq *srq,
 		goto err_idx;
 
 	if (!udata) {
-		ret = alloc_srq_wrid(hr_dev, srq);
+		ret = alloc_srq_wrid(srq);
 		if (ret)
 			goto err_wqe_buf;
 	}
Signature · 1 line
2.39.5
author maintainer
#23 lore raw

PATCH 23/81 RDMA/hns: Fix mapping error of zero-hop WQE buffer

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: wenglianfa <[email protected]>

[ Upstream commit 8673a6c2d9e483dfeeef83a1f06f59e05636f4d1 ]

Due to HW limitation, the three region of WQE buffer must be mapped and set to HW in a fixed order: SQ buffer, SGE buffer, and RQ buffer.

Currently when one region is zero-hop while the other two are not, the zero-hop region will not be mapped. This violate the limitation above and leads to address error.

Fixes 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
---
 drivers/infiniband/hw/hns/hns_roce_hem.c | 43 ++++++++++++++++--------
 drivers/infiniband/hw/hns/hns_roce_mr.c  |  5 ---
 2 files changed, 29 insertions(+), 19 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hem.c +29 -14
index 6e0ca8a4b2a8..f1de497fc977 100644
@@ -986,6 +986,7 @@ struct hns_roce_hem_item {
 	size_t count; /* max ba numbers */
 	int start; /* start buf offset in this hem */
 	int end; /* end buf offset in this hem */
+	bool exist_bt;
 };
 
 /* All HEM items are linked in a tree structure */
@@ -1014,6 +1015,7 @@ hem_list_alloc_item(struct hns_roce_dev *hr_dev, int start, int end, int count,
 		}
 	}
 
+	hem->exist_bt = exist_bt;
 	hem->count = count;
 	hem->start = start;
 	hem->end = end;
@@ -1024,22 +1026,22 @@ hem_list_alloc_item(struct hns_roce_dev *hr_dev, int start, int end, int count,
 }
 
 static void hem_list_free_item(struct hns_roce_dev *hr_dev,
-			       struct hns_roce_hem_item *hem, bool exist_bt)
+			       struct hns_roce_hem_item *hem)
 {
-	if (exist_bt)
+	if (hem->exist_bt)
 		dma_free_coherent(hr_dev->dev, hem->count * BA_BYTE_LEN,
 				  hem->addr, hem->dma_addr);
 	kfree(hem);
 }
 
 static void hem_list_free_all(struct hns_roce_dev *hr_dev,
-			      struct list_head *head, bool exist_bt)
+			      struct list_head *head)
 {
 	struct hns_roce_hem_item *hem, *temp_hem;
 
 	list_for_each_entry_safe(hem, temp_hem, head, list) {
 		list_del(&hem->list);
-		hem_list_free_item(hr_dev, hem, exist_bt);
+		hem_list_free_item(hr_dev, hem);
 	}
 }
 
@@ -1139,6 +1141,10 @@ int hns_roce_hem_list_calc_root_ba(const struct hns_roce_buf_region *regions,
 
 	for (i = 0; i < region_cnt; i++) {
 		r = (struct hns_roce_buf_region *)&regions[i];
+		/* when r->hopnum = 0, the region should not occupy root_ba. */
+		if (!r->hopnum)
+			continue;
+
 		if (r->hopnum > 1) {
 			step = hem_list_calc_ba_range(r->hopnum, 1, unit);
 			if (step > 0)
@@ -1232,7 +1238,7 @@ static int hem_list_alloc_mid_bt(struct hns_roce_dev *hr_dev,
 
 err_exit:
 	for (level = 1; level < hopnum; level++)
-		hem_list_free_all(hr_dev, &temp_list[level], true);
+		hem_list_free_all(hr_dev, &temp_list[level]);
 
 	return ret;
 }
@@ -1273,16 +1279,26 @@ static int alloc_fake_root_bt(struct hns_roce_dev *hr_dev, void *cpu_base,
 {
 	struct hns_roce_hem_item *hem;
 
+	/* This is on the has_mtt branch, if r->hopnum
+	 * is 0, there is no root_ba to reuse for the
+	 * region's fake hem, so a dma_alloc request is
+	 * necessary here.
+	 */
 	hem = hem_list_alloc_item(hr_dev, r->offset, r->offset + r->count - 1,
-				  r->count, false);
+				  r->count, !r->hopnum);
 	if (!hem)
 		return -ENOMEM;
 
-	hem_list_assign_bt(hem, cpu_base, phy_base);
+	/* The root_ba can be reused only when r->hopnum > 0. */
+	if (r->hopnum)
+		hem_list_assign_bt(hem, cpu_base, phy_base);
 	list_add(&hem->list, branch_head);
 	list_add(&hem->sibling, leaf_head);
 
-	return r->count;
+	/* If r->hopnum == 0, 0 is returned,
+	 * so that the root_bt entry is not occupied.
+	 */
+	return r->hopnum ? r->count : 0;
 }
 
 static int setup_middle_bt(struct hns_roce_dev *hr_dev, void *cpu_base,
@@ -1326,7 +1342,7 @@ setup_root_hem(struct hns_roce_dev *hr_dev, struct hns_roce_hem_list *hem_list,
 		return -ENOMEM;
 
 	total = 0;
-	for (i = 0; i < region_cnt && total < max_ba_num; i++) {
+	for (i = 0; i < region_cnt && total <= max_ba_num; i++) {
 		r = &regions[i];
 		if (!r->count)
 			continue;
@@ -1392,9 +1408,9 @@ static int hem_list_alloc_root_bt(struct hns_roce_dev *hr_dev,
 			     region_cnt);
 	if (ret) {
 		for (i = 0; i < region_cnt; i++)
-			hem_list_free_all(hr_dev, &head.branch[i], false);
+			hem_list_free_all(hr_dev, &head.branch[i]);
 
-		hem_list_free_all(hr_dev, &head.root, true);
+		hem_list_free_all(hr_dev, &head.root);
 	}
 
 	return ret;
@@ -1457,10 +1473,9 @@ void hns_roce_hem_list_release(struct hns_roce_dev *hr_dev,
 
 	for (i = 0; i < HNS_ROCE_MAX_BT_REGION; i++)
 		for (j = 0; j < HNS_ROCE_MAX_BT_LEVEL; j++)
-			hem_list_free_all(hr_dev, &hem_list->mid_bt[i][j],
-					  j != 0);
+			hem_list_free_all(hr_dev, &hem_list->mid_bt[i][j]);
 
-	hem_list_free_all(hr_dev, &hem_list->root_bt, true);
+	hem_list_free_all(hr_dev, &hem_list->root_bt);
 	INIT_LIST_HEAD(&hem_list->btm_bt);
 	hem_list->root_ba = 0;
 }
drivers/infiniband/hw/hns/hns_roce_mr.c +0 -5
index acdcd5c9f42f..408ef2a96149 100644
@@ -767,11 +767,6 @@ int hns_roce_mtr_map(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 	for (i = 0, mapped_cnt = 0; i < mtr->hem_cfg.region_count &&
 	     mapped_cnt < page_cnt; i++) {
 		r = &mtr->hem_cfg.region[i];
-		/* if hopnum is 0, no need to map pages in this region */
-		if (!r->hopnum) {
-			mapped_cnt += r->count;
-			continue;
-		}
 
 		if (r->offset + r->count > page_cnt) {
 			ret = -EINVAL;
Signature · 1 line
2.39.5
author maintainer
#24 lore raw

PATCH 24/81 RDMA/hns: Fix warning storm caused by invalid input in IO path

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chengchang Tang <[email protected]>

[ Upstream commit fa5c4ba8cdbfd2c2d6422e001311c8213283ebbf ]

WARN_ON() is called in the IO path. And it could lead to a warning storm. Use WARN_ON_ONCE() instead of WARN_ON().

Fixes 12542f1de179 ("RDMA/hns: Refactor process about opcode in post_send()")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +2 -2
index 60628ef1c46e..23667cfbf8e7 100644
@@ -471,7 +471,7 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,
 	valid_num_sge = calc_wr_sge_num(wr, &msg_len);
 
 	ret = set_ud_opcode(ud_sq_wqe, wr);
-	if (WARN_ON(ret))
+	if (WARN_ON_ONCE(ret))
 		return ret;
 
 	ud_sq_wqe->msg_len = cpu_to_le32(msg_len);
@@ -575,7 +575,7 @@ static inline int set_rc_wqe(struct hns_roce_qp *qp,
 	rc_sq_wqe->msg_len = cpu_to_le32(msg_len);
 
 	ret = set_rc_opcode(hr_dev, rc_sq_wqe, wr);
-	if (WARN_ON(ret))
+	if (WARN_ON_ONCE(ret))
 		return ret;
 
 	hr_reg_write(rc_sq_wqe, RC_SEND_WQE_SO,
Signature · 1 line
2.39.5
author maintainer
#25 lore raw

PATCH 25/81 RDMA/hns: Fix missing flush CQE for DWQE

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chengchang Tang <[email protected]>

[ Upstream commit e3debdd48423d3d75b9d366399228d7225d902cd ]

Flush CQE handler has not been called if QP state gets into errored mode in DWQE path. So, the new added outstanding WQEs will never be flushed.

It leads to a hung task timeout when using NFS over RDMA:

    __switch_to+0x7c/0xd0
    __schedule+0x350/0x750
    schedule+0x50/0xf0
    schedule_timeout+0x2c8/0x340
    wait_for_common+0xf4/0x2b0
    wait_for_completion+0x20/0x40
    __ib_drain_sq+0x140/0x1d0 [ib_core]
    ib_drain_sq+0x98/0xb0 [ib_core]
    rpcrdma_xprt_disconnect+0x68/0x270 [rpcrdma]
    xprt_rdma_close+0x20/0x60 [rpcrdma]
    xprt_autoclose+0x64/0x1cc [sunrpc]
    process_one_work+0x1d8/0x4e0
    worker_thread+0x154/0x420
    kthread+0x108/0x150
    ret_from_fork+0x10/0x18
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +4 -0
index 23667cfbf8e7..ab0dca9d199a 100644
@@ -673,6 +673,10 @@ static void write_dwqe(struct hns_roce_dev *hr_dev, struct hns_roce_qp *qp,
 #define HNS_ROCE_SL_SHIFT 2
 	struct hns_roce_v2_rc_send_wqe *rc_sq_wqe = wqe;
 
+	if (unlikely(qp->state == IB_QPS_ERR)) {
+		flush_cqe(hr_dev, qp);
+		return;
+	}
 	/* All kinds of DirectWQE have the same header field layout */
 	hr_reg_enable(rc_sq_wqe, RC_SEND_WQE_FLAG);
 	hr_reg_write(rc_sq_wqe, RC_SEND_WQE_DB_SL_L, qp->sl);
Signature · 1 line
2.39.5
author maintainer
#26 lore raw

PATCH 26/81 net: stmmac: platform: provide devm_stmmac_probe_config_dt()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit d74065427374da6659a2d7fad4ec55c8926d43c4 ]

Provide a devres variant of stmmac_probe_config_dt() that allows users to skip calling stmmac_remove_config_dt() at driver detach.

Stable-dep-of: 2b6ffcd7873b ("net: stmmac: restructure the error path of stmmac_probe_config_dt()")

---
 .../ethernet/stmicro/stmmac/stmmac_platform.c | 41 +++++++++++++++++++
 .../ethernet/stmicro/stmmac/stmmac_platform.h |  2 +
 2 files changed, 43 insertions(+)
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +41 -0
index 0046a4ee6e64..5b4517b0ca08 100644
@@ -8,6 +8,7 @@
   Author: Giuseppe Cavallaro <[email protected]>
 *******************************************************************************/
 
+#include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
@@ -628,6 +629,39 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	return ret;
 }
 
+static void devm_stmmac_remove_config_dt(void *data)
+{
+	struct plat_stmmacenet_data *plat = data;
+
+	/* Platform data argument is unused */
+	stmmac_remove_config_dt(NULL, plat);
+}
+
+/**
+ * devm_stmmac_probe_config_dt
+ * @pdev: platform_device structure
+ * @mac: MAC address to use
+ * Description: Devres variant of stmmac_probe_config_dt(). Does not require
+ * the user to call stmmac_remove_config_dt() at driver detach.
+ */
+struct plat_stmmacenet_data *
+devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
+{
+	struct plat_stmmacenet_data *plat;
+	int ret;
+
+	plat = stmmac_probe_config_dt(pdev, mac);
+	if (IS_ERR(plat))
+		return plat;
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       devm_stmmac_remove_config_dt, plat);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return plat;
+}
+
 /**
  * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt()
  * @pdev: platform_device structure
@@ -650,12 +684,19 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	return ERR_PTR(-EINVAL);
 }
 
+struct plat_stmmacenet_data *
+devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
+{
+	return ERR_PTR(-EINVAL);
+}
+
 void stmmac_remove_config_dt(struct platform_device *pdev,
 			     struct plat_stmmacenet_data *plat)
 {
 }
 #endif /* CONFIG_OF */
 EXPORT_SYMBOL_GPL(stmmac_probe_config_dt);
+EXPORT_SYMBOL_GPL(devm_stmmac_probe_config_dt);
 EXPORT_SYMBOL_GPL(stmmac_remove_config_dt);
 
 int stmmac_get_platform_resources(struct platform_device *pdev,
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h +2 -0
index 3fff3f59d73d..2102c6d41464 100644
@@ -13,6 +13,8 @@
 
 struct plat_stmmacenet_data *
 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac);
+struct plat_stmmacenet_data *
+devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac);
 void stmmac_remove_config_dt(struct platform_device *pdev,
 			     struct plat_stmmacenet_data *plat);
 
Signature · 1 line
2.39.5
author maintainer
#27 lore raw

PATCH 27/81 net: stmmac: dont create a MDIO bus if unnecessary

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Halaney <[email protected]>

[ Upstream commit f3c2caacee824ce4a331cdafb0b8dc8e987f105e ]

Currently a MDIO bus is created if the devicetree description is either:

1. Not fixed-link
2. fixed-link but contains a MDIO bus as well

The "1" case above isn't always accurate. If there's a phy-handle, it could be referencing a phy on another MDIO controller's bus[1]. In this case, where the MDIO bus is not described at all, currently stmmac will make a MDIO bus and scan its address space to discover phys (of which there are none). This process takes time scanning a bus that is known to be empty, delaying time to complete probe.

There are also a lot of upstream devicetrees[2] that expect a MDIO bus to be created, scanned for phys, and the first one found connected to the MAC. This case can be inferred from the platform description by not having a phy-handle && not being fixed-link. This hits case "1" in the current driver's logic, and must be handled in any logic change here since it is a valid legacy dt-binding.

Let's improve the logic to create a MDIO bus if either:

- Devicetree contains a MDIO bus
- !fixed-link && !phy-handle (legacy handling)

This way the case where no MDIO bus should be made is handled, as well as retaining backwards compatibility with the valid cases.

Below devicetree snippets can be found that explain some of the cases above more concretely.

Here's[0] a devicetree example where the MAC is both fixed-link and driving a switch on MDIO (case "2" above). This needs a MDIO bus to be created:

    &fec1 {
            phy-mode = "rmii";

            fixed-link {
                    speed = <100>;
                    full-duplex;
            };

            mdio1: mdio {
                    switch0: switch0@0 {
                            compatible = "marvell,mv88e6190";
                            pinctrl-0 = <&pinctrl_gpio_switch0>;
                    };
            };
    };

Here's[1] an example where there is no MDIO bus or fixed-link for the ethernet1 MAC, so no MDIO bus should be created since ethernet0 is the MDIO master for ethernet1's phy:

    &ethernet0 {
            phy-mode = "sgmii";
            phy-handle = <&sgmii_phy0>;

            mdio {
                    compatible = "snps,dwmac-mdio";
                    sgmii_phy0: phy@8 {
                            compatible = "ethernet-phy-id0141.0dd4";
                            reg = <0x8>;
                            device_type = "ethernet-phy";
                    };

                    sgmii_phy1: phy@a {
                            compatible = "ethernet-phy-id0141.0dd4";
                            reg = <0xa>;
                            device_type = "ethernet-phy";
                    };
            };
    };

    &ethernet1 {
            phy-mode = "sgmii";
            phy-handle = <&sgmii_phy1>;
    };

Finally there's descriptions like this[2] which don't describe the MDIO bus but expect it to be created and the whole address space scanned for a phy since there's no phy-handle or fixed-link described:

    &gmac {
            phy-supply = <&vcc_lan>;
            phy-mode = "rmii";
            snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
            snps,reset-active-low;
            snps,reset-delays-us = <0 10000 1000000>;
    };

[0] https://elixir.bootlin.com/linux/v6.5-rc5/source/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
[1] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
[2] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/rockchip/rk3368-r88.dts#L164

Stable-dep-of: 2b6ffcd7873b ("net: stmmac: restructure the error path of stmmac_probe_config_dt()")

---
 .../ethernet/stmicro/stmmac/stmmac_platform.c | 91 +++++++++++--------
 1 file changed, 54 insertions(+), 37 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +54 -37
index 5b4517b0ca08..e7e7d388399d 100644
@@ -294,62 +294,80 @@ static int stmmac_mtl_setup(struct platform_device *pdev,
 }
 
 /**
- * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
- * @plat: driver data platform structure
- * @np: device tree node
- * @dev: device pointer
- * Description:
- * The mdio bus will be allocated in case of a phy transceiver is on board;
- * it will be NULL if the fixed-link is configured.
- * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
- * in any case (for DSA, mdio must be registered even if fixed-link).
- * The table below sums the supported configurations:
- *	-------------------------------
- *	snps,phy-addr	|     Y
- *	-------------------------------
- *	phy-handle	|     Y
- *	-------------------------------
- *	fixed-link	|     N
- *	-------------------------------
- *	snps,dwmac-mdio	|
- *	  even if	|     Y
- *	fixed-link	|
- *	-------------------------------
+ * stmmac_of_get_mdio() - Gets the MDIO bus from the devicetree.
+ * @np: devicetree node
  *
- * It returns 0 in case of success otherwise -ENODEV.
+ * The MDIO bus will be searched for in the following ways:
+ * 1. The compatible is "snps,dwc-qos-ethernet-4.10" && a "mdio" named
+ *    child node exists
+ * 2. A child node with the "snps,dwmac-mdio" compatible is present
+ *
+ * Return: The MDIO node if present otherwise NULL
  */
-static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
-			 struct device_node *np, struct device *dev)
+static struct device_node *stmmac_of_get_mdio(struct device_node *np)
 {
-	bool mdio = !of_phy_is_fixed_link(np);
 	static const struct of_device_id need_mdio_ids[] = {
 		{ .compatible = "snps,dwc-qos-ethernet-4.10" },
 		{},
 	};
+	struct device_node *mdio_node = NULL;
 
 	if (of_match_node(need_mdio_ids, np)) {
-		plat->mdio_node = of_get_child_by_name(np, "mdio");
+		mdio_node = of_get_child_by_name(np, "mdio");
 	} else {
 		/**
 		 * If snps,dwmac-mdio is passed from DT, always register
 		 * the MDIO
 		 */
-		for_each_child_of_node(np, plat->mdio_node) {
-			if (of_device_is_compatible(plat->mdio_node,
+		for_each_child_of_node(np, mdio_node) {
+			if (of_device_is_compatible(mdio_node,
 						    "snps,dwmac-mdio"))
 				break;
 		}
 	}
 
-	if (plat->mdio_node) {
+	return mdio_node;
+}
+
+/**
+ * stmmac_mdio_setup() - Populate platform related MDIO structures.
+ * @plat: driver data platform structure
+ * @np: devicetree node
+ * @dev: device pointer
+ *
+ * This searches for MDIO information from the devicetree.
+ * If an MDIO node is found, it's assigned to plat->mdio_node and
+ * plat->mdio_bus_data is allocated.
+ * If no connection can be determined, just plat->mdio_bus_data is allocated
+ * to indicate a bus should be created and scanned for a phy.
+ * If it's determined there's no MDIO bus needed, both are left NULL.
+ *
+ * This expects that plat->phy_node has already been searched for.
+ *
+ * Return: 0 on success, errno otherwise.
+ */
+static int stmmac_mdio_setup(struct plat_stmmacenet_data *plat,
+			     struct device_node *np, struct device *dev)
+{
+	bool legacy_mdio;
+
+	plat->mdio_node = stmmac_of_get_mdio(np);
+	if (plat->mdio_node)
 		dev_dbg(dev, "Found MDIO subnode\n");
-		mdio = true;
-	}
 
-	if (mdio) {
-		plat->mdio_bus_data =
-			devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
-				     GFP_KERNEL);
+	/* Legacy devicetrees allowed for no MDIO bus description and expect
+	 * the bus to be scanned for devices. If there's no phy or fixed-link
+	 * described assume this is the case since there must be something
+	 * connected to the MAC.
+	 */
+	legacy_mdio = !of_phy_is_fixed_link(np) && !plat->phy_node;
+	if (legacy_mdio)
+		dev_info(dev, "Deprecated MDIO bus assumption used\n");
+
+	if (plat->mdio_node || legacy_mdio) {
+		plat->mdio_bus_data = devm_kzalloc(dev,
+						   sizeof(*plat->mdio_bus_data),
+						   GFP_KERNEL);
 		if (!plat->mdio_bus_data)
 			return -ENOMEM;
 
@@ -454,8 +472,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
 		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 
-	/* To Configure PHY by using all device-tree supported properties */
-	rc = stmmac_dt_phy(plat, np, &pdev->dev);
+	rc = stmmac_mdio_setup(plat, np, &pdev->dev);
 	if (rc)
 		return ERR_PTR(rc);
 
Signature · 1 line
2.39.5
author maintainer
#28 lore raw

PATCH 28/81 net: stmmac: restructure the error path of stmmac_probe_config_dt()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joe Hattori <[email protected]>

[ Upstream commit 2b6ffcd7873b7e8a62c3e15a6f305bfc747c466b ]

Current implementation of stmmac_probe_config_dt() does not release the OF node reference obtained by of_parse_phandle() in some error paths. The problem is that some error paths call stmmac_remove_config_dt() to clean up but others use and unwind ladder. These two types of error handling have not kept in sync and have been a recurring source of bugs. Re-write the error handling in stmmac_probe_config_dt() to use an unwind ladder. Consequently, stmmac_remove_config_dt() is not needed anymore, thus remove it.

This bug was found by an experimental verification tool that I am developing.

Fixes 4838a5405028 ("net: stmmac: Fix wrapper drivers not detecting PHY")
---
 .../ethernet/stmicro/stmmac/stmmac_platform.c | 27 ++++++++++++-------
 1 file changed, 17 insertions(+), 10 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +17 -10
index e7e7d388399d..c368ef3cd9cb 100644
@@ -473,8 +473,10 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 
 	rc = stmmac_mdio_setup(plat, np, &pdev->dev);
-	if (rc)
-		return ERR_PTR(rc);
+	if (rc) {
+		ret = ERR_PTR(rc);
+		goto error_put_phy;
+	}
 
 	of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
 
@@ -560,8 +562,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
 			       GFP_KERNEL);
 	if (!dma_cfg) {
-		stmmac_remove_config_dt(pdev, plat);
-		return ERR_PTR(-ENOMEM);
+		ret = ERR_PTR(-ENOMEM);
+		goto error_put_mdio;
 	}
 	plat->dma_cfg = dma_cfg;
 
@@ -589,8 +591,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 
 	rc = stmmac_mtl_setup(pdev, plat);
 	if (rc) {
-		stmmac_remove_config_dt(pdev, plat);
-		return ERR_PTR(rc);
+		ret = ERR_PTR(rc);
+		goto error_put_mdio;
 	}
 
 	/* clock setup */
@@ -642,6 +644,10 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	clk_disable_unprepare(plat->pclk);
 error_pclk_get:
 	clk_disable_unprepare(plat->stmmac_clk);
+error_put_mdio:
+	of_node_put(plat->mdio_node);
+error_put_phy:
+	of_node_put(plat->phy_node);
 
 	return ret;
 }
@@ -650,16 +656,17 @@ static void devm_stmmac_remove_config_dt(void *data)
 {
 	struct plat_stmmacenet_data *plat = data;
 
-	/* Platform data argument is unused */
-	stmmac_remove_config_dt(NULL, plat);
+	clk_disable_unprepare(plat->stmmac_clk);
+	clk_disable_unprepare(plat->pclk);
+	of_node_put(plat->mdio_node);
+	of_node_put(plat->phy_node);
 }
 
 /**
  * devm_stmmac_probe_config_dt
  * @pdev: platform_device structure
  * @mac: MAC address to use
- * Description: Devres variant of stmmac_probe_config_dt(). Does not require
- * the user to call stmmac_remove_config_dt() at driver detach.
+ * Description: Devres variant of stmmac_probe_config_dt().
  */
 struct plat_stmmacenet_data *
 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
Signature · 1 line
2.39.5
author maintainer
#29 lore raw

PATCH 29/81 net: fix memory leak in tcp_conn_request()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Liang <[email protected]>

[ Upstream commit 4f4aa4aa28142d53f8b06585c478476cfe325cfc ]

If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will return without free the dst memory, which allocated in af_ops->route_req.

Here is the kmemleak stack:

unreferenced object 0xffff8881198631c0 (size 240):
comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s) hex dump (first 32 bytes):

    00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff  ................
    81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00  .U..............
  backtrace:
    [<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80
    [<ffffffffba11b4c5>] dst_alloc+0x55/0x250
    [<ffffffffba227bf6>] rt_dst_alloc+0x46/0x1d0
    [<ffffffffba23050a>] __mkroute_output+0x29a/0xa50
    [<ffffffffba23456b>] ip_route_output_key_hash+0x10b/0x240
    [<ffffffffba2346bd>] ip_route_output_flow+0x1d/0x90
    [<ffffffffba254855>] inet_csk_route_req+0x2c5/0x500
    [<ffffffffba26b331>] tcp_conn_request+0x691/0x12c0
    [<ffffffffba27bd08>] tcp_rcv_state_process+0x3c8/0x11b0
    [<ffffffffba2965c6>] tcp_v4_do_rcv+0x156/0x3b0
    [<ffffffffba299c98>] tcp_v4_rcv+0x1cf8/0x1d80
    [<ffffffffba239656>] ip_protocol_deliver_rcu+0xf6/0x360
    [<ffffffffba2399a6>] ip_local_deliver_finish+0xe6/0x1e0
    [<ffffffffba239b8e>] ip_local_deliver+0xee/0x360
    [<ffffffffba239ead>] ip_rcv+0xad/0x2f0
    [<ffffffffba110943>] __netif_receive_skb_one_core+0x123/0x140

Call dst_release() to free the dst memory when inet_csk_reqsk_queue_hash_add() return false in tcp_conn_request().

Fixes ff46e3b44219 ("Fix race for duplicate reqsk on identical SYN")
---
 net/ipv4/tcp_input.c | 1 +
 1 file changed, 1 insertion(+)
net/ipv4/tcp_input.c +1 -0
index 9ac47ccfe120..2379ee551164 100644
@@ -7124,6 +7124,7 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops,
 			if (unlikely(!inet_csk_reqsk_queue_hash_add(sk, req,
 								    req->timeout))) {
 				reqsk_free(req);
+				dst_release(dst);
 				return 0;
 			}
 
Signature · 1 line
2.39.5
author maintainer
#30 lore raw

PATCH 30/81 ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christian Ehrig <[email protected]>

[ Upstream commit ac931d4cdec3df8b6eac3bc40a6871123021f078 ]

Today ipip devices in collect-metadata mode don't allow for sending FOU or GUE encapsulated packets. This patch lifts the restriction by adding a struct ip_tunnel_encap to the tunnel metadata.

On the egress path, the members of this struct can be set by the bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now evaluates the contents of this struct and adds the corresponding FOU or GUE header. Furthermore, it is making sure that additional header bytes are taken into account for PMTU discovery.

On the ingress path, an ipip device in collect-metadata mode will fill this struct and a BPF tc-hook can obtain the information via a call to the bpf_skb_get_fou_encap kfunc.

The minor change to ip_tunnel_encap, which now takes a pointer to struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control FOU encap type and parameters on a per packet-level.

Stable-dep-of: b5a7b661a073 ("net: Fix netns for ip_tunnel_init_flow()")

---
 include/net/ip_tunnels.h | 28 +++++++++++++++-------------
 net/ipv4/ip_tunnel.c     | 22 ++++++++++++++++++++--
 net/ipv4/ipip.c          |  1 +
 net/ipv6/sit.c           |  2 +-
 4 files changed, 37 insertions(+), 16 deletions(-)
include/net/ip_tunnels.h +15 -13
index f1ba369306fe..84751313b826 100644
@@ -57,6 +57,13 @@ struct ip_tunnel_key {
 	__u8			flow_flags;
 };
 
+struct ip_tunnel_encap {
+	u16			type;
+	u16			flags;
+	__be16			sport;
+	__be16			dport;
+};
+
 /* Flags for ip_tunnel_info mode. */
 #define IP_TUNNEL_INFO_TX	0x01	/* represents tx tunnel parameters */
 #define IP_TUNNEL_INFO_IPV6	0x02	/* key contains IPv6 addresses */
@@ -66,9 +73,9 @@ struct ip_tunnel_key {
 #define IP_TUNNEL_OPTS_MAX					\
 	GENMASK((sizeof_field(struct ip_tunnel_info,		\
 			      options_len) * BITS_PER_BYTE) - 1, 0)
-
 struct ip_tunnel_info {
 	struct ip_tunnel_key	key;
+	struct ip_tunnel_encap	encap;
 #ifdef CONFIG_DST_CACHE
 	struct dst_cache	dst_cache;
 #endif
@@ -86,13 +93,6 @@ struct ip_tunnel_6rd_parm {
 };
 #endif
 
-struct ip_tunnel_encap {
-	u16			type;
-	u16			flags;
-	__be16			sport;
-	__be16			dport;
-};
-
 struct ip_tunnel_prl_entry {
 	struct ip_tunnel_prl_entry __rcu *next;
 	__be32				addr;
@@ -293,6 +293,7 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn,
 				   __be32 remote, __be32 local,
 				   __be32 key);
 
+void ip_tunnel_md_udp_encap(struct sk_buff *skb, struct ip_tunnel_info *info);
 int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb,
 		  const struct tnl_ptk_info *tpi, struct metadata_dst *tun_dst,
 		  bool log_ecn_error);
@@ -405,22 +406,23 @@ static inline int ip_encap_hlen(struct ip_tunnel_encap *e)
 	return hlen;
 }
 
-static inline int ip_tunnel_encap(struct sk_buff *skb, struct ip_tunnel *t,
+static inline int ip_tunnel_encap(struct sk_buff *skb,
+				  struct ip_tunnel_encap *e,
 				  u8 *protocol, struct flowi4 *fl4)
 {
 	const struct ip_tunnel_encap_ops *ops;
 	int ret = -EINVAL;
 
-	if (t->encap.type == TUNNEL_ENCAP_NONE)
+	if (e->type == TUNNEL_ENCAP_NONE)
 		return 0;
 
-	if (t->encap.type >= MAX_IPTUN_ENCAP_OPS)
+	if (e->type >= MAX_IPTUN_ENCAP_OPS)
 		return -EINVAL;
 
 	rcu_read_lock();
-	ops = rcu_dereference(iptun_encaps[t->encap.type]);
+	ops = rcu_dereference(iptun_encaps[e->type]);
 	if (likely(ops && ops->build_header))
-		ret = ops->build_header(skb, &t->encap, protocol, fl4);
+		ret = ops->build_header(skb, e, protocol, fl4);
 	rcu_read_unlock();
 
 	return ret;
net/ipv4/ip_tunnel.c +20 -2
index 3445e576b05b..d56cfb6c3da4 100644
@@ -359,6 +359,20 @@ static struct ip_tunnel *ip_tunnel_create(struct net *net,
 	return ERR_PTR(err);
 }
 
+void ip_tunnel_md_udp_encap(struct sk_buff *skb, struct ip_tunnel_info *info)
+{
+	const struct iphdr *iph = ip_hdr(skb);
+	const struct udphdr *udph;
+
+	if (iph->protocol != IPPROTO_UDP)
+		return;
+
+	udph = (struct udphdr *)((__u8 *)iph + (iph->ihl << 2));
+	info->encap.sport = udph->source;
+	info->encap.dport = udph->dest;
+}
+EXPORT_SYMBOL(ip_tunnel_md_udp_encap);
+
 int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb,
 		  const struct tnl_ptk_info *tpi, struct metadata_dst *tun_dst,
 		  bool log_ecn_error)
@@ -599,7 +613,11 @@ void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 			    tunnel_id_to_key32(key->tun_id), RT_TOS(tos),
 			    dev_net(dev), 0, skb->mark, skb_get_hash(skb),
 			    key->flow_flags);
-	if (tunnel->encap.type != TUNNEL_ENCAP_NONE)
+
+	if (!tunnel_hlen)
+		tunnel_hlen = ip_encap_hlen(&tun_info->encap);
+
+	if (ip_tunnel_encap(skb, &tun_info->encap, &proto, &fl4) < 0)
 		goto tx_error;
 
 	use_cache = ip_tunnel_dst_cache_usable(skb, tun_info);
@@ -759,7 +777,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 			    dev_net(dev), tunnel->parms.link,
 			    tunnel->fwmark, skb_get_hash(skb), 0);
 
-	if (ip_tunnel_encap(skb, tunnel, &protocol, &fl4) < 0)
+	if (ip_tunnel_encap(skb, &tunnel->encap, &protocol, &fl4) < 0)
 		goto tx_error;
 
 	if (connected && md) {
net/ipv4/ipip.c +1 -0
index 180f9daf5bec..1cf35c50cdf4 100644
@@ -241,6 +241,7 @@ static int ipip_tunnel_rcv(struct sk_buff *skb, u8 ipproto)
 			tun_dst = ip_tun_rx_dst(skb, 0, 0, 0);
 			if (!tun_dst)
 				return 0;
+			ip_tunnel_md_udp_encap(skb, &tun_dst->u.tun_info);
 		}
 		skb_reset_mac_header(skb);
 
net/ipv6/sit.c +1 -1
index 3ffb6a5b1f82..cc24cefdb85c 100644
@@ -1024,7 +1024,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 		ttl = iph6->hop_limit;
 	tos = INET_ECN_encapsulate(tos, ipv6_get_dsfield(iph6));
 
-	if (ip_tunnel_encap(skb, tunnel, &protocol, &fl4) < 0) {
+	if (ip_tunnel_encap(skb, &tunnel->encap, &protocol, &fl4) < 0) {
 		ip_rt_put(rt);
 		goto tx_error;
 	}
Signature · 1 line
2.39.5
author maintainer
#31 lore raw

PATCH 31/81 ip_tunnel: annotate data-races around t->parms.link

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit f694eee9e1c00d6ca06c5e59c04e3b6ff7d64aa9 ]

t->parms.link is read locklessly, annotate these reads and opposite writes accordingly.

Stable-dep-of: b5a7b661a073 ("net: Fix netns for ip_tunnel_init_flow()")

---
 net/ipv4/ip_tunnel.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)
net/ipv4/ip_tunnel.c +13 -14
index d56cfb6c3da4..196fe734ad38 100644
@@ -102,10 +102,9 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn,
 		if (!ip_tunnel_key_match(&t->parms, flags, key))
 			continue;
 
-		if (t->parms.link == link)
+		if (READ_ONCE(t->parms.link) == link)
 			return t;
-		else
-			cand = t;
+		cand = t;
 	}
 
 	hlist_for_each_entry_rcu(t, head, hash_node) {
@@ -117,9 +116,9 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn,
 		if (!ip_tunnel_key_match(&t->parms, flags, key))
 			continue;
 
-		if (t->parms.link == link)
+		if (READ_ONCE(t->parms.link) == link)
 			return t;
-		else if (!cand)
+		if (!cand)
 			cand = t;
 	}
 
@@ -137,9 +136,9 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn,
 		if (!ip_tunnel_key_match(&t->parms, flags, key))
 			continue;
 
-		if (t->parms.link == link)
+		if (READ_ONCE(t->parms.link) == link)
 			return t;
-		else if (!cand)
+		if (!cand)
 			cand = t;
 	}
 
@@ -150,9 +149,9 @@ struct ip_tunnel *ip_tunnel_lookup(struct ip_tunnel_net *itn,
 		    !(t->dev->flags & IFF_UP))
 			continue;
 
-		if (t->parms.link == link)
+		if (READ_ONCE(t->parms.link) == link)
 			return t;
-		else if (!cand)
+		if (!cand)
 			cand = t;
 	}
 
@@ -221,7 +220,7 @@ static struct ip_tunnel *ip_tunnel_find(struct ip_tunnel_net *itn,
 	hlist_for_each_entry_rcu(t, head, hash_node) {
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr &&
-		    link == t->parms.link &&
+		    link == READ_ONCE(t->parms.link) &&
 		    type == t->dev->type &&
 		    ip_tunnel_key_match(&t->parms, flags, key))
 			break;
@@ -774,7 +773,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 
 	ip_tunnel_init_flow(&fl4, protocol, dst, tnl_params->saddr,
 			    tunnel->parms.o_key, RT_TOS(tos),
-			    dev_net(dev), tunnel->parms.link,
+			    dev_net(dev), READ_ONCE(tunnel->parms.link),
 			    tunnel->fwmark, skb_get_hash(skb), 0);
 
 	if (ip_tunnel_encap(skb, &tunnel->encap, &protocol, &fl4) < 0)
@@ -894,7 +893,7 @@ static void ip_tunnel_update(struct ip_tunnel_net *itn,
 	if (t->parms.link != p->link || t->fwmark != fwmark) {
 		int mtu;
 
-		t->parms.link = p->link;
+		WRITE_ONCE(t->parms.link, p->link);
 		t->fwmark = fwmark;
 		mtu = ip_tunnel_bind_dev(dev);
 		if (set_mtu)
@@ -1084,9 +1083,9 @@ EXPORT_SYMBOL(ip_tunnel_get_link_net);
 
 int ip_tunnel_get_iflink(const struct net_device *dev)
 {
-	struct ip_tunnel *tunnel = netdev_priv(dev);
+	const struct ip_tunnel *tunnel = netdev_priv(dev);
 
-	return tunnel->parms.link;
+	return READ_ONCE(tunnel->parms.link);
 }
 EXPORT_SYMBOL(ip_tunnel_get_iflink);
 
Signature · 1 line
2.39.5
author maintainer
#32 lore raw

PATCH 32/81 ipv4: ip_tunnel: Unmask upper DSCP bits in ip_tunnel_bind_dev()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <[email protected]>

[ Upstream commit e7191e517a03d025405c7df730b400ad4118474e ]

Unmask the upper DSCP bits when initializing an IPv4 flow key via ip_tunnel_init_flow() before passing it to ip_route_output_key() so that in the future we could perform the FIB lookup according to the full DSCP value.

Stable-dep-of: b5a7b661a073 ("net: Fix netns for ip_tunnel_init_flow()")

---
 net/ipv4/ip_tunnel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/ip_tunnel.c +1 -1
index 196fe734ad38..d3ad2c424fe9 100644
@@ -293,7 +293,7 @@ static int ip_tunnel_bind_dev(struct net_device *dev)
 
 		ip_tunnel_init_flow(&fl4, iph->protocol, iph->daddr,
 				    iph->saddr, tunnel->parms.o_key,
-				    RT_TOS(iph->tos), dev_net(dev),
+				    iph->tos & INET_DSCP_MASK, dev_net(dev),
 				    tunnel->parms.link, tunnel->fwmark, 0, 0);
 		rt = ip_route_output_key(tunnel->net, &fl4);
 
Signature · 1 line
2.39.5
author maintainer
#33 lore raw

PATCH 33/81 ipv4: ip_tunnel: Unmask upper DSCP bits in ip_md_tunnel_xmit()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <[email protected]>

[ Upstream commit c34cfe72bb260fc49660d9e6a9ba95ba01669ae2 ]

Unmask the upper DSCP bits when initializing an IPv4 flow key via ip_tunnel_init_flow() before passing it to ip_route_output_key() so that in the future we could perform the FIB lookup according to the full DSCP value.

Note that the 'tos' variable includes the full DS field. Either the one specified via the tunnel key or the one inherited from the inner packet.

Stable-dep-of: b5a7b661a073 ("net: Fix netns for ip_tunnel_init_flow()")

---
 net/ipv4/ip_tunnel.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/ipv4/ip_tunnel.c +4 -3
index d3ad2c424fe9..eb74e33ffb64 100644
@@ -43,6 +43,7 @@
 #include <net/rtnetlink.h>
 #include <net/udp.h>
 #include <net/dst_metadata.h>
+#include <net/inet_dscp.h>
 
 #if IS_ENABLED(CONFIG_IPV6)
 #include <net/ipv6.h>
@@ -609,9 +610,9 @@ void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 			tos = ipv6_get_dsfield((const struct ipv6hdr *)inner_iph);
 	}
 	ip_tunnel_init_flow(&fl4, proto, key->u.ipv4.dst, key->u.ipv4.src,
-			    tunnel_id_to_key32(key->tun_id), RT_TOS(tos),
-			    dev_net(dev), 0, skb->mark, skb_get_hash(skb),
-			    key->flow_flags);
+			    tunnel_id_to_key32(key->tun_id),
+			    tos & INET_DSCP_MASK, dev_net(dev), 0, skb->mark,
+			    skb_get_hash(skb), key->flow_flags);
 
 	if (!tunnel_hlen)
 		tunnel_hlen = ip_encap_hlen(&tun_info->encap);
Signature · 1 line
2.39.5
author maintainer
#34 lore raw

PATCH 34/81 ipv4: ip_tunnel: Unmask upper DSCP bits in ip_tunnel_xmit()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <[email protected]>

[ Upstream commit c2b639f9f3b7a058ca9c7349b096f355773f2cd8 ]

Unmask the upper DSCP bits when initializing an IPv4 flow key via ip_tunnel_init_flow() before passing it to ip_route_output_key() so that in the future we could perform the FIB lookup according to the full DSCP value.

Note that the 'tos' variable includes the full DS field. Either the one specified as part of the tunnel parameters or the one inherited from the inner packet.

Stable-dep-of: b5a7b661a073 ("net: Fix netns for ip_tunnel_init_flow()")

---
 net/ipv4/ip_tunnel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/ip_tunnel.c +1 -1
index eb74e33ffb64..4f30ccf2d321 100644
@@ -773,7 +773,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 	}
 
 	ip_tunnel_init_flow(&fl4, protocol, dst, tnl_params->saddr,
-			    tunnel->parms.o_key, RT_TOS(tos),
+			    tunnel->parms.o_key, tos & INET_DSCP_MASK,
 			    dev_net(dev), READ_ONCE(tunnel->parms.link),
 			    tunnel->fwmark, skb_get_hash(skb), 0);
 
Signature · 1 line
2.39.5
author maintainer
#35 lore raw

PATCH 35/81 net: Fix netns for ip_tunnel_init_flow()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiao Liang <[email protected]>

[ Upstream commit b5a7b661a073727219fedc35f5619f62418ffe72 ]

The device denoted by tunnel->parms.link resides in the underlay net namespace. Therefore pass tunnel->net to ip_tunnel_init_flow().

Fixes db53cd3d88dc ("net: Handle l3mdev in ip_tunnel_init_flow")
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c | 3 +--
 net/ipv4/ip_tunnel.c                                | 6 +++---
 2 files changed, 4 insertions(+), 5 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c +1 -2
index b3472fb94617..8883ef012747 100644
@@ -423,8 +423,7 @@ mlxsw_sp_span_gretap4_route(const struct net_device *to_dev,
 
 	parms = mlxsw_sp_ipip_netdev_parms4(to_dev);
 	ip_tunnel_init_flow(&fl4, parms.iph.protocol, *daddrp, *saddrp,
-			    0, 0, dev_net(to_dev), parms.link, tun->fwmark, 0,
-			    0);
+			    0, 0, tun->net, parms.link, tun->fwmark, 0, 0);
 
 	rt = ip_route_output_key(tun->net, &fl4);
 	if (IS_ERR(rt))
net/ipv4/ip_tunnel.c +3 -3
index 4f30ccf2d321..67cabc40f1dc 100644
@@ -294,7 +294,7 @@ static int ip_tunnel_bind_dev(struct net_device *dev)
 
 		ip_tunnel_init_flow(&fl4, iph->protocol, iph->daddr,
 				    iph->saddr, tunnel->parms.o_key,
-				    iph->tos & INET_DSCP_MASK, dev_net(dev),
+				    iph->tos & INET_DSCP_MASK, tunnel->net,
 				    tunnel->parms.link, tunnel->fwmark, 0, 0);
 		rt = ip_route_output_key(tunnel->net, &fl4);
 
@@ -611,7 +611,7 @@ void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 	}
 	ip_tunnel_init_flow(&fl4, proto, key->u.ipv4.dst, key->u.ipv4.src,
 			    tunnel_id_to_key32(key->tun_id),
-			    tos & INET_DSCP_MASK, dev_net(dev), 0, skb->mark,
+			    tos & INET_DSCP_MASK, tunnel->net, 0, skb->mark,
 			    skb_get_hash(skb), key->flow_flags);
 
 	if (!tunnel_hlen)
@@ -774,7 +774,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 
 	ip_tunnel_init_flow(&fl4, protocol, dst, tnl_params->saddr,
 			    tunnel->parms.o_key, tos & INET_DSCP_MASK,
-			    dev_net(dev), READ_ONCE(tunnel->parms.link),
+			    tunnel->net, READ_ONCE(tunnel->parms.link),
 			    tunnel->fwmark, skb_get_hash(skb), 0);
 
 	if (ip_tunnel_encap(skb, &tunnel->encap, &protocol, &fl4) < 0)
Signature · 1 line
2.39.5
author maintainer
#36 lore raw

PATCH 36/81 netrom: check buffer length before accessing it

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ilya Shchipletsov <[email protected]>

[ Upstream commit a4fd163aed2edd967a244499754dec991d8b4c7d ]

Syzkaller reports an uninit value read from ax25cmp when sending raw message through ieee802154 implementation.

=====================================================

BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119
 ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119
 nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601
 nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774
 nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 raw_sendmsg+0x654/0xc10 net/ieee802154/socket.c:299
 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
 __sys_sendmsg net/socket.c:2667 [inline]
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:

 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x318/0x740 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780
 sock_alloc_send_skb include/net/sock.h:1884 [inline]
 raw_sendmsg+0x36d/0xc10 net/ieee802154/socket.c:282
 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
 __sys_sendmsg net/socket.c:2667 [inline]
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================

This issue occurs because the skb buffer is too small, and it's actual allocation is aligned. This hides an actual issue, which is that nr_route_frame does not validate the buffer size before using it.

Fix this issue by checking skb->len before accessing any fields in skb->data.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

---
 net/netrom/nr_route.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/netrom/nr_route.c +6 -0
index bd2b17b219ae..0b270893ee14 100644
@@ -754,6 +754,12 @@ int nr_route_frame(struct sk_buff *skb, ax25_cb *ax25)
 	int ret;
 	struct sk_buff *skbn;
 
+	/*
+	 * Reject malformed packets early. Check that it contains at least 2
+	 * addresses and 1 byte more for Time-To-Live
+	 */
+	if (skb->len < 2 * sizeof(ax25_address) + 1)
+		return 0;
 
 	nr_src  = (ax25_address *)(skb->data + 0);
 	nr_dest = (ax25_address *)(skb->data + 7);
Signature · 1 line
2.39.5
author maintainer
#37 lore raw

PATCH 37/81 drm/i915/dg1: Fix power gate sequence.

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rodrigo Vivi <[email protected]>

[ Upstream commit 20e7c5313ffbf11c34a46395345677adbe890bee ]

sub-pipe PG is not present on DG1. Setting these bits can disable other power gates and cause GPU hangs on video playbacks.

VLK: 16314, 4304

Fixes 85a12d7eb8fe ("drm/i915/tgl: Fix Media power gate sequence.")
Cc Vinay Belgaumkar <[email protected]>
Cc Himal Prasad Ghimiray <[email protected]>
(cherry picked from commit de7061947b4ed4be857d452c60d5fb795831d79e)
---
 drivers/gpu/drm/i915/gt/intel_rc6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_rc6.c +1 -1
index f8d0523f4c18..d1dcb018117d 100644
@@ -134,7 +134,7 @@ static void gen11_rc6_enable(struct intel_rc6 *rc6)
 			GEN9_MEDIA_PG_ENABLE |
 			GEN11_MEDIA_SAMPLER_PG_ENABLE;
 
-	if (GRAPHICS_VER(gt->i915) >= 12) {
+	if (GRAPHICS_VER(gt->i915) >= 12 && !IS_DG1(gt->i915)) {
 		for (i = 0; i < I915_MAX_VCS; i++)
 			if (HAS_ENGINE(gt, _VCS(i)))
 				pg_enable |= (VDN_HCP_POWERGATE_ENABLE(i) |
Signature · 1 line
2.39.5
author maintainer
#38 lore raw

PATCH 38/81 netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 542ed8145e6f9392e3d0a86a0e9027d2ffd183e4 ]

Access to genmask field in struct nft_set_ext results in unaligned atomic read:

[   72.130109] Unable to handle kernel paging request at virtual address ffff0000c2bb708c
[   72.131036] Mem abort info:
[   72.131213]   ESR = 0x0000000096000021
[   72.131446]   EC = 0x25: DABT (current EL), IL = 32 bits
[   72.132209]   SET = 0, FnV = 0
[   72.133216]   EA = 0, S1PTW = 0
[   72.134080]   FSC = 0x21: alignment fault
[   72.135593] Data abort info:
[   72.137194]   ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
[   72.142351]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[   72.145989]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[   72.150115] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000237d27000
[   72.154893] [ffff0000c2bb708c] pgd=0000000000000000, p4d=180000023ffff403, pud=180000023f84b403, pmd=180000023f835403,
+pte=0068000102bb7707
[   72.163021] Internal error: Oops: 0000000096000021 [#1] SMP
[...]
[   72.170041] CPU: 7 UID: 0 PID: 54 Comm: kworker/7:0 Tainted: G            E      6.13.0-rc3+ #2
[   72.170509] Tainted: [E]=UNSIGNED_MODULE
[   72.170720] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-stable202302-for-qemu 03/01/2023
[   72.171192] Workqueue: events_power_efficient nft_rhash_gc [nf_tables]
[   72.171552] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[   72.171915] pc : nft_rhash_gc+0x200/0x2d8 [nf_tables]
[   72.172166] lr : nft_rhash_gc+0x128/0x2d8 [nf_tables]
[   72.172546] sp : ffff800081f2bce0
[   72.172724] x29: ffff800081f2bd40 x28: ffff0000c2bb708c x27: 0000000000000038
[   72.173078] x26: ffff0000c6780ef0 x25: ffff0000c643df00 x24: ffff0000c6778f78
[   72.173431] x23: 000000000000001a x22: ffff0000c4b1f000 x21: ffff0000c6780f78
[   72.173782] x20: ffff0000c2bb70dc x19: ffff0000c2bb7080 x18: 0000000000000000
[   72.174135] x17: ffff0000c0a4e1c0 x16: 0000000000003000 x15: 0000ac26d173b978
[   72.174485] x14: ffffffffffffffff x13: 0000000000000030 x12: ffff0000c6780ef0
[   72.174841] x11: 0000000000000000 x10: ffff800081f2bcf8 x9 : ffff0000c3000000
[   72.175193] x8 : 00000000000004be x7 : 0000000000000000 x6 : 0000000000000000
[   72.175544] x5 : 0000000000000040 x4 : ffff0000c3000010 x3 : 0000000000000000
[   72.175871] x2 : 0000000000003a98 x1 : ffff0000c2bb708c x0 : 0000000000000004
[   72.176207] Call trace:
[   72.176316]  nft_rhash_gc+0x200/0x2d8 [nf_tables] (P)
[   72.176653]  process_one_work+0x178/0x3d0
[   72.176831]  worker_thread+0x200/0x3f0
[   72.176995]  kthread+0xe8/0xf8
[   72.177130]  ret_from_fork+0x10/0x20
[   72.177289] Code: 54fff984 d503201f d2800080 91003261 (f820303f)
[   72.177557] ---[ end trace 0000000000000000 ]---

Align struct nft_set_ext to word size to address this and documentation it.

pahole reports that this increases the size of elements for rhash and pipapo in 8 bytes on x86_64.

Fixes 7ffc7481153b ("netfilter: nft_set_hash: skip duplicated elements pending gc run")
---
 include/net/netfilter/nf_tables.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
include/net/netfilter/nf_tables.h +5 -2
index c24b04235d91..d11398aa642e 100644
@@ -706,15 +706,18 @@ struct nft_set_ext_tmpl {
 /**
  *	struct nft_set_ext - set extensions
  *
- *	@genmask: generation mask
+ *	@genmask: generation mask, but also flags (see NFT_SET_ELEM_DEAD_BIT)
  *	@offset: offsets of individual extension types
  *	@data: beginning of extension data
+ *
+ *	This structure must be aligned to word size, otherwise atomic bitops
+ *	on genmask field can cause alignment failure on some archs.
  */
 struct nft_set_ext {
 	u8	genmask;
 	u8	offset[NFT_SET_EXT_NUM];
 	char	data[];
-};
+} __aligned(BITS_PER_LONG / 8);
 
 static inline void nft_set_ext_prepare(struct nft_set_ext_tmpl *tmpl)
 {
Signature · 1 line
2.39.5
author maintainer
#39 lore raw

PATCH 39/81 net: llc: reset skb->transport_header

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Antonio Pastor <[email protected]>

[ Upstream commit a024e377efed31ecfb39210bed562932321345b3 ]

802.2+LLC+SNAP frames received by napi_complete_done with GRO and DSA have skb->transport_header set two bytes short, or pointing 2 bytes before network_header & skb->data. As snap_rcv expects transport_header to point to SNAP header (OID:PID) after LLC processing advances offset over LLC header (llc_rcv & llc_fixup_skb), code doesn't find a match and packet is dropped.

Between napi_complete_done and snap_rcv, transport_header is not used until __netif_receive_skb_core, where originally it was being reset. Commit fda55eca5a33 ("net: introduce skb_transport_header_was_set()") only does so if not set, on the assumption the value was set correctly by GRO (and also on assumption that "network stacks usually reset the transport header anyway"). Afterwards it is moved forward by llc_fixup_skb.

Locally generated traffic shows up at __netif_receive_skb_core with no transport_header set and is processed without issue. On a setup with GRO but no DSA, transport_header and network_header are both set to point to skb->data which is also correct.

As issue is LLC specific, to avoid impacting non-LLC traffic, and to follow up on original assumption made on previous code change, llc_fixup_skb to reset the offset after skb pull. llc_fixup_skb assumes the LLC header is at skb->data, and by definition SNAP header immediately follows.

Fixes fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
---
 net/llc/llc_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/llc/llc_input.c +1 -1
index 51bccfb00a9c..61b0159b2fbe 100644
@@ -124,8 +124,8 @@ static inline int llc_fixup_skb(struct sk_buff *skb)
 	if (unlikely(!pskb_may_pull(skb, llc_len)))
 		return 0;
 
-	skb->transport_header += llc_len;
 	skb_pull(skb, llc_len);
+	skb_reset_transport_header(skb);
 	if (skb->protocol == htons(ETH_P_802_2)) {
 		__be16 pdulen;
 		s32 data_size;
Signature · 1 line
2.39.5
author maintainer
#40 lore raw

PATCH 40/81 ALSA: usb-audio: US16x08: Initialize array before use

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tanya Agarwal <[email protected]>

[ Upstream commit b06a6187ef983f501e93faa56209169752d3bde3 ]

Initialize meter_urb array before use in mixer_us16x08.c.

CID 1410197: (#1 of 1): Uninitialized scalar variable (UNINIT)
uninit_use_in_call: Using uninitialized value *meter_urb when calling get_meter_levels_from_urb.

Coverity Link:
https://scan7.scan.coverity.com/#/project-view/52849/11354?selectedIssue=1410197

Fixes d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
---
 sound/usb/mixer_us16x08.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/usb/mixer_us16x08.c +1 -1
index 6eb7d93b358d..20ac32635f1f 100644
@@ -687,7 +687,7 @@ static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol,
 	struct usb_mixer_elem_info *elem = kcontrol->private_data;
 	struct snd_usb_audio *chip = elem->head.mixer->chip;
 	struct snd_us16x08_meter_store *store = elem->private_data;
-	u8 meter_urb[64];
+	u8 meter_urb[64] = {0};
 
 	switch (kcontrol->private_value) {
 	case 0: {
Signature · 1 line
2.39.5
author maintainer
#41 lore raw

PATCH 41/81 eth: bcmsysport: fix call balance of priv->clk handling routines

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vitalii Mordan <[email protected]>

[ Upstream commit b255ef45fcc2141c1bf98456796abb956d843a27 ]

Check the return value of clk_prepare_enable to ensure that priv->clk has been successfully enabled.

If priv->clk was not enabled during bcm_sysport_probe, bcm_sysport_resume, or bcm_sysport_open, it must not be disabled in any subsequent execution paths.

Fixes 31bc72d97656 ("net: systemport: fetch and use clock resources")
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bcmsysport.c +18 -3
index 1693f6c60efc..e53ab9b5482e 100644
@@ -1956,7 +1956,11 @@ static int bcm_sysport_open(struct net_device *dev)
 	unsigned int i;
 	int ret;
 
-	clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		netdev_err(dev, "could not enable priv clock\n");
+		return ret;
+	}
 
 	/* Reset UniMAC */
 	umac_reset(priv);
@@ -2614,7 +2618,11 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 		goto err_deregister_notifier;
 	}
 
-	clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not enable priv clock\n");
+		goto err_deregister_netdev;
+	}
 
 	priv->rev = topctrl_readl(priv, REV_CNTL) & REV_MASK;
 	dev_info(&pdev->dev,
@@ -2628,6 +2636,8 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_deregister_netdev:
+	unregister_netdev(dev);
 err_deregister_notifier:
 	unregister_netdevice_notifier(&priv->netdev_notifier);
 err_deregister_fixed_link:
@@ -2799,7 +2809,12 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
 	if (!netif_running(dev))
 		return 0;
 
-	clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		netdev_err(dev, "could not enable priv clock\n");
+		return ret;
+	}
+
 	if (priv->wolopts)
 		clk_disable_unprepare(priv->wol_clk);
 
Signature · 1 line
2.39.5
author maintainer
#42 lore raw

PATCH 42/81 net: mv643xx_eth: fix an OF node reference leak

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joe Hattori <[email protected]>

[ Upstream commit ad5c318086e2e23b577eca33559c5ebf89bc7eb9 ]

Current implementation of mv643xx_eth_shared_of_add_port() calls of_parse_phandle(), but does not release the refcount on error. Call of_node_put() in the error path and in mv643xx_eth_shared_of_remove().

This bug was found by an experimental verification tool that I am developing.

Fixes 76723bca2802 ("net: mv643xx_eth: add DT parsing support")
---
 drivers/net/ethernet/marvell/mv643xx_eth.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/net/ethernet/marvell/mv643xx_eth.c +12 -2
index 8941f69d93e9..b9dda48326d5 100644
@@ -2707,9 +2707,15 @@ static struct platform_device *port_platdev[3];
 
 static void mv643xx_eth_shared_of_remove(void)
 {
+	struct mv643xx_eth_platform_data *pd;
 	int n;
 
 	for (n = 0; n < 3; n++) {
+		if (!port_platdev[n])
+			continue;
+		pd = dev_get_platdata(&port_platdev[n]->dev);
+		if (pd)
+			of_node_put(pd->phy_node);
 		platform_device_del(port_platdev[n]);
 		port_platdev[n] = NULL;
 	}
@@ -2770,8 +2776,10 @@ static int mv643xx_eth_shared_of_add_port(struct platform_device *pdev,
 	}
 
 	ppdev = platform_device_alloc(MV643XX_ETH_NAME, dev_num);
-	if (!ppdev)
-		return -ENOMEM;
+	if (!ppdev) {
+		ret = -ENOMEM;
+		goto put_err;
+	}
 	ppdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 	ppdev->dev.of_node = pnp;
 
@@ -2793,6 +2801,8 @@ static int mv643xx_eth_shared_of_add_port(struct platform_device *pdev,
 
 port_err:
 	platform_device_put(ppdev);
+put_err:
+	of_node_put(ppd.phy_node);
 	return ret;
 }
 
Signature · 1 line
2.39.5
author maintainer
#43 lore raw

PATCH 43/81 net: wwan: t7xx: Fix FSM command timeout issue

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jinjian Song <[email protected]>

[ Upstream commit 4f619d518db9cd1a933c3a095a5f95d0c1584ae8 ]

When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released.

BUG: unable to handle page fault for address: fffffffffffffff8
PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:complete_all+0x3e/0xa0
[...]
Call Trace:
 <TASK>
 ? __die_body+0x68/0xb0
 ? page_fault_oops+0x379/0x3e0
 ? exc_page_fault+0x69/0xa0
 ? asm_exc_page_fault+0x22/0x30
 ? complete_all+0x3e/0xa0
 fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)]
 ? __pfx_autoremove_wake_function+0x10/0x10
 kthread+0xd8/0x110
 ? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)]
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x38/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30
 </TASK>
[...]
CR2: fffffffffffffff8
---[ end trace 0000000000000000 ]---

Use the reference counter to ensure safe release as Sergey suggests:
https://lore.kernel.org/all/[email protected]/

---
 drivers/net/wwan/t7xx/t7xx_state_monitor.c | 26 ++++++++++++++--------
 drivers/net/wwan/t7xx/t7xx_state_monitor.h |  5 +++--
 2 files changed, 20 insertions(+), 11 deletions(-)
drivers/net/wwan/t7xx/t7xx_state_monitor.c +17 -9
index 0bcca08ff2bd..44a2081c5249 100644
@@ -97,14 +97,21 @@ void t7xx_fsm_broadcast_state(struct t7xx_fsm_ctl *ctl, enum md_state state)
 	fsm_state_notify(ctl->md, state);
 }
 
+static void fsm_release_command(struct kref *ref)
+{
+	struct t7xx_fsm_command *cmd = container_of(ref, typeof(*cmd), refcnt);
+
+	kfree(cmd);
+}
+
 static void fsm_finish_command(struct t7xx_fsm_ctl *ctl, struct t7xx_fsm_command *cmd, int result)
 {
 	if (cmd->flag & FSM_CMD_FLAG_WAIT_FOR_COMPLETION) {
-		*cmd->ret = result;
-		complete_all(cmd->done);
+		cmd->result = result;
+		complete_all(&cmd->done);
 	}
 
-	kfree(cmd);
+	kref_put(&cmd->refcnt, fsm_release_command);
 }
 
 static void fsm_del_kf_event(struct t7xx_fsm_event *event)
@@ -387,7 +394,6 @@ static int fsm_main_thread(void *data)
 
 int t7xx_fsm_append_cmd(struct t7xx_fsm_ctl *ctl, enum t7xx_fsm_cmd_state cmd_id, unsigned int flag)
 {
-	DECLARE_COMPLETION_ONSTACK(done);
 	struct t7xx_fsm_command *cmd;
 	unsigned long flags;
 	int ret;
@@ -399,11 +405,13 @@ int t7xx_fsm_append_cmd(struct t7xx_fsm_ctl *ctl, enum t7xx_fsm_cmd_state cmd_id
 	INIT_LIST_HEAD(&cmd->entry);
 	cmd->cmd_id = cmd_id;
 	cmd->flag = flag;
+	kref_init(&cmd->refcnt);
 	if (flag & FSM_CMD_FLAG_WAIT_FOR_COMPLETION) {
-		cmd->done = &done;
-		cmd->ret = &ret;
+		init_completion(&cmd->done);
+		kref_get(&cmd->refcnt);
 	}
 
+	kref_get(&cmd->refcnt);
 	spin_lock_irqsave(&ctl->command_lock, flags);
 	list_add_tail(&cmd->entry, &ctl->command_queue);
 	spin_unlock_irqrestore(&ctl->command_lock, flags);
@@ -413,11 +421,11 @@ int t7xx_fsm_append_cmd(struct t7xx_fsm_ctl *ctl, enum t7xx_fsm_cmd_state cmd_id
 	if (flag & FSM_CMD_FLAG_WAIT_FOR_COMPLETION) {
 		unsigned long wait_ret;
 
-		wait_ret = wait_for_completion_timeout(&done,
+		wait_ret = wait_for_completion_timeout(&cmd->done,
 						       msecs_to_jiffies(FSM_CMD_TIMEOUT_MS));
-		if (!wait_ret)
-			return -ETIMEDOUT;
 
+		ret = wait_ret ? cmd->result : -ETIMEDOUT;
+		kref_put(&cmd->refcnt, fsm_release_command);
 		return ret;
 	}
 
drivers/net/wwan/t7xx/t7xx_state_monitor.h +3 -2
index b1af0259d4c5..d9f2522e6b2c 100644
@@ -107,8 +107,9 @@ struct t7xx_fsm_command {
 	struct list_head	entry;
 	enum t7xx_fsm_cmd_state	cmd_id;
 	unsigned int		flag;
-	struct completion	*done;
-	int			*ret;
+	struct completion	done;
+	int			result;
+	struct kref		refcnt;
 };
 
 struct t7xx_fsm_notifier {
Signature · 1 line
2.39.5
author maintainer
#44 lore raw

PATCH 44/81 RDMA/rtrs: Ensure ib_sge list is accessible

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Li Zhijian <[email protected]>

[ Upstream commit fb514b31395946022f13a08e06a435f53cf9e8b3 ]

Move the declaration of the 'ib_sge list' variable outside the 'always_invalidate' block to ensure it remains accessible for use throughout the function.

Previously, 'ib_sge list' was declared within the 'always_invalidate' block, limiting its accessibility, then caused a
'BUG: kernel NULL pointer dereference'[1].

 ? __die_body.cold+0x19/0x27
 ? page_fault_oops+0x15a/0x2d0
 ? search_module_extables+0x19/0x60
 ? search_bpf_extables+0x5f/0x80
 ? exc_page_fault+0x7e/0x180
 ? asm_exc_page_fault+0x26/0x30
 ? memcpy_orig+0xd5/0x140
 rxe_mr_copy+0x1c3/0x200 [rdma_rxe]
 ? rxe_pool_get_index+0x4b/0x80 [rdma_rxe]
 copy_data+0xa5/0x230 [rdma_rxe]
 rxe_requester+0xd9b/0xf70 [rdma_rxe]
 ? finish_task_switch.isra.0+0x99/0x2e0
 rxe_sender+0x13/0x40 [rdma_rxe]
 do_task+0x68/0x1e0 [rdma_rxe]
 process_one_work+0x177/0x330
 worker_thread+0x252/0x390
 ? __pfx_worker_thread+0x10/0x10

This change ensures the variable is available for subsequent operations that require it.

[1] https://lore.kernel.org/linux-rdma/[email protected]/

Fixes 9cb837480424 ("RDMA/rtrs: server: main functionality")
---
 drivers/infiniband/ulp/rtrs/rtrs-srv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/ulp/rtrs/rtrs-srv.c +1 -1
index a70ccb4d4c85..8b3b9b798676 100644
@@ -344,6 +344,7 @@ static int send_io_resp_imm(struct rtrs_srv_con *con, struct rtrs_srv_op *id,
 	struct rtrs_srv_mr *srv_mr;
 	bool need_inval = false;
 	enum ib_send_flags flags;
+	struct ib_sge list;
 	u32 imm;
 	int err;
 
@@ -396,7 +397,6 @@ static int send_io_resp_imm(struct rtrs_srv_con *con, struct rtrs_srv_op *id,
 	imm = rtrs_to_io_rsp_imm(id->msg_id, errno, need_inval);
 	imm_wr.wr.next = NULL;
 	if (always_invalidate) {
-		struct ib_sge list;
 		struct rtrs_msg_rkey_rsp *msg;
 
 		srv_mr = &srv_path->mrs[id->msg_id];
Signature · 1 line
2.39.5
author maintainer
#45 lore raw

PATCH 45/81 net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <[email protected]>

[ Upstream commit 68e068cabd2c6c533ef934c2e5151609cf6ecc6d ]

The blamed commit disabled hardware offoad of IPv6 packets with extension headers on devices that advertise NETIF_F_IPV6_CSUM, based on the definition of that feature in skbuff.h:

* * - %NETIF_F_IPV6_CSUM
* - Driver (device) is only able to checksum plain

 *       TCP or UDP packets over IPv6. These are specifically
 *       unencapsulated packets of the form IPv6|TCP or
 *       IPv6|UDP where the Next Header field in the IPv6
 *       header is either TCP or UDP. IPv6 extension headers
 *       are not supported with this feature. This feature
 *       cannot be set in features for a device with
 *       NETIF_F_HW_CSUM also set. This feature is being
 *       DEPRECATED (see below).

The change causes skb_warn_bad_offload to fire for BIG TCP packets.

[  496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0
[  496.310297]  ? skb_warn_bad_offload+0xc4/0xe0
[  496.310300]  skb_checksum_help+0x129/0x1f0
[  496.310303]  skb_csum_hwoffload_help+0x150/0x1b0
[  496.310306]  validate_xmit_skb+0x159/0x270
[  496.310309]  validate_xmit_skb_list+0x41/0x70
[  496.310312]  sch_direct_xmit+0x5c/0x250
[  496.310317]  __qdisc_run+0x388/0x620

BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to communicate packet length, as this is an IPv6 jumbogram. But, the feature is only enabled on devices that support BIG TCP TSO. The header is only present for PF_PACKET taps like tcpdump, and not transmitted by physical devices.

For this specific case of extension headers that are not transmitted, return to the situation before the blamed commit and support hardware offload.

ipv6_has_hopopt_jumbo() tests not only whether this header is present, but also that it is the only extension header before a terminal (L4) header.

---
 net/core/dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/core/dev.c +3 -1
index 2ee1a535b3cb..90559cb66803 100644
@@ -3679,8 +3679,10 @@ int skb_csum_hwoffload_help(struct sk_buff *skb,
 
 	if (features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)) {
 		if (vlan_get_protocol(skb) == htons(ETH_P_IPV6) &&
-		    skb_network_header_len(skb) != sizeof(struct ipv6hdr))
+		    skb_network_header_len(skb) != sizeof(struct ipv6hdr) &&
+		    !ipv6_has_hopopt_jumbo(skb))
 			goto sw_checksum;
+
 		switch (skb->csum_offset) {
 		case offsetof(struct tcphdr, check):
 		case offsetof(struct udphdr, check):
Signature · 1 line
2.39.5
author maintainer
#46 lore raw

PATCH 46/81 net: restrict SO_REUSEPORT to inet sockets

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 5b0af621c3f6ef9261cf6067812f2fd9943acb4b ]

After blamed commit, crypto sockets could accidentally be destroyed from RCU call back, as spotted by zyzbot [1].

Trying to acquire a mutex in RCU callback is not allowed.

Restrict SO_REUSEPORT socket option to inet sockets.

v1 of this patch supported TCP, UDP and SCTP sockets, but fcnal-test.sh test needed RAW and ICMP support.

[1]

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:562

in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 24, name: ksoftirqd/1
preempt_count: 100, expected: 0
RCU nest depth: 0, expected: 0
1 lock held by ksoftirqd/1/24:
#0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline] #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2561 [inline] #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_core+0xa37/0x17a0 kernel/rcu/tree.c:2823
Preemption disabled at:

 [<ffffffff8161c8c8>] softirq_handle_begin kernel/softirq.c:402 [inline]
 [<ffffffff8161c8c8>] handle_softirqs+0x128/0x9b0 kernel/softirq.c:537
CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.13.0-rc3-syzkaller-00174-ga024e377efed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:94 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
  __might_resched+0x5d4/0x780 kernel/sched/core.c:8758
  __mutex_lock_common kernel/locking/mutex.c:562 [inline]
  __mutex_lock+0x131/0xee0 kernel/locking/mutex.c:735
  crypto_put_default_null_skcipher+0x18/0x70 crypto/crypto_null.c:179
  aead_release+0x3d/0x50 crypto/algif_aead.c:489
  alg_do_release crypto/af_alg.c:118 [inline]
  alg_sock_destruct+0x86/0xc0 crypto/af_alg.c:502
  __sk_destruct+0x58/0x5f0 net/core/sock.c:2260
  rcu_do_batch kernel/rcu/tree.c:2567 [inline]
  rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823
  handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
  run_ksoftirqd+0xca/0x130 kernel/softirq.c:950
  smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
  kthread+0x2f0/0x390 kernel/kthread.c:389
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 </TASK>
---
 net/core/sock.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/core/sock.c +4 -1
index dce8f878f638..168e7f42c054 100644
@@ -1122,7 +1122,10 @@ int sk_setsockopt(struct sock *sk, int level, int optname,
 		sk->sk_reuse = (valbool ? SK_CAN_REUSE : SK_NO_REUSE);
 		break;
 	case SO_REUSEPORT:
-		sk->sk_reuseport = valbool;
+		if (valbool && !sk_is_inet(sk))
+			ret = -EOPNOTSUPP;
+		else
+			sk->sk_reuseport = valbool;
 		break;
 	case SO_TYPE:
 	case SO_PROTOCOL:
Signature · 1 line
2.39.5
author maintainer
#47 lore raw

PATCH 47/81 net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Maciej S. Szmigiero <[email protected]>

[ Upstream commit a7af435df0e04cfb4a4004136d597c42639a2ae7 ]

ipc_mmio_init() used the post-decrement operator in its loop continuing condition of "retries" counter being "> 0", which meant that when this condition caused loop exit "retries" counter reached -1.

But the later valid exec stage failure check only tests for "retries" counter being exactly zero, so it didn't trigger in this case (but would wrongly trigger if the code reaches a valid exec stage in the very last loop iteration).

Fix this by using the pre-decrement operator instead, so the loop counter is exactly zero on valid exec stage failure.

---
 drivers/net/wwan/iosm/iosm_ipc_mmio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wwan/iosm/iosm_ipc_mmio.c +1 -1
index 63eb08c43c05..6764c13530b9 100644
@@ -104,7 +104,7 @@ struct iosm_mmio *ipc_mmio_init(void __iomem *mmio, struct device *dev)
 			break;
 
 		msleep(20);
-	} while (retries-- > 0);
+	} while (--retries > 0);
 
 	if (!retries) {
 		dev_err(ipc_mmio->dev, "invalid exec stage %X", stage);
Signature · 1 line
2.39.5
author maintainer
#48 lore raw

PATCH 48/81 af_packet: fix vlan_get_tci() vs MSG_PEEK

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 77ee7a6d16b6ec07b5c3ae2b6b60a24c1afbed09 ]

Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot.

Rework vlan_get_tci() to not touch skb at all, so that it can be used from many cpus on the same skb.

Add a const qualifier to skb argument.

[1]
skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL>

------------[ cut here ]------------
 kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
 RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0b 8d 48 c7 c6 9e 6c 26 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 3a 5a 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc90003baf5b8 EFLAGS: 00010286
RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 8565c1eec37aa000
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffff88802616fb50 R08: ffffffff817f0a4c R09: 1ffff92000775e50
R10: dffffc0000000000 R11: fffff52000775e51 R12: 0000000000000140
R13: ffff88807a1d5800 R14: ffff88807a1d5810 R15: 0000000000000014
FS:  00007fa03261f6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd65753000 CR3: 0000000031720000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  skb_push+0xe5/0x100 net/core/skbuff.c:2636
  vlan_get_tci+0x272/0x550 net/packet/af_packet.c:565
  packet_recvmsg+0x13c9/0x1ef0 net/packet/af_packet.c:3616
  sock_recvmsg_nosec net/socket.c:1044 [inline]
  sock_recvmsg+0x22f/0x280 net/socket.c:1066
  ____sys_recvmsg+0x1c6/0x480 net/socket.c:2814
  ___sys_recvmsg net/socket.c:2856 [inline]
  do_recvmmsg+0x426/0xab0 net/socket.c:2951
  __sys_recvmmsg net/socket.c:3025 [inline]
  __do_sys_recvmmsg net/socket.c:3048 [inline]
  __se_sys_recvmmsg net/socket.c:3041 [inline]
  __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3041
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
---
 net/packet/af_packet.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
net/packet/af_packet.c +3 -9
index 9da9e41899c6..224ac9a3482c 100644
@@ -541,10 +541,8 @@ static void *packet_current_frame(struct packet_sock *po,
 	return packet_lookup_frame(po, rb, rb->head, status);
 }
 
-static u16 vlan_get_tci(struct sk_buff *skb, struct net_device *dev)
+static u16 vlan_get_tci(const struct sk_buff *skb, struct net_device *dev)
 {
-	u8 *skb_orig_data = skb->data;
-	int skb_orig_len = skb->len;
 	struct vlan_hdr vhdr, *vh;
 	unsigned int header_len;
 
@@ -565,12 +563,8 @@ static u16 vlan_get_tci(struct sk_buff *skb, struct net_device *dev)
 	else
 		return 0;
 
-	skb_push(skb, skb->data - skb_mac_header(skb));
-	vh = skb_header_pointer(skb, header_len, sizeof(vhdr), &vhdr);
-	if (skb_orig_data != skb->data) {
-		skb->data = skb_orig_data;
-		skb->len = skb_orig_len;
-	}
+	vh = skb_header_pointer(skb, skb_mac_offset(skb) + header_len,
+				sizeof(vhdr), &vhdr);
 	if (unlikely(!vh))
 		return 0;
 
Signature · 1 line
2.39.5
author maintainer
#49 lore raw

PATCH 49/81 af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit f91a5b8089389eb408501af2762f168c3aaa7b79 ]

Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot.

Rework vlan_get_protocol_dgram() to not touch skb at all, so that it can be used from many cpus on the same skb.

Add a const qualifier to skb argument.

[1]
skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL>

------------[ cut here ]------------
 kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5892 Comm: syz-executor883 Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
 RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0b 8d 48 c7 c6 86 d5 25 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 5a 69 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900038d7638 EFLAGS: 00010282
RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 609ffd18ea660600
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffff88802483c8d0 R08: ffffffff817f0a8c R09: 1ffff9200071ae60
R10: dffffc0000000000 R11: fffff5200071ae61 R12: 0000000000000140
R13: ffff88807fc8e400 R14: ffff88807fc8e3f4 R15: 0000000000000011
FS:  00007fbac5e006c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbac5e00d58 CR3: 000000001238e000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  skb_push+0xe5/0x100 net/core/skbuff.c:2636
  vlan_get_protocol_dgram+0x165/0x290 net/packet/af_packet.c:585
  packet_recvmsg+0x948/0x1ef0 net/packet/af_packet.c:3552
  sock_recvmsg_nosec net/socket.c:1033 [inline]
  sock_recvmsg+0x22f/0x280 net/socket.c:1055
  ____sys_recvmsg+0x1c6/0x480 net/socket.c:2803
  ___sys_recvmsg net/socket.c:2845 [inline]
  do_recvmmsg+0x426/0xab0 net/socket.c:2940
  __sys_recvmmsg net/socket.c:3014 [inline]
  __do_sys_recvmmsg net/socket.c:3037 [inline]
  __se_sys_recvmmsg net/socket.c:3030 [inline]
  __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3030
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
---
 include/linux/if_vlan.h | 16 +++++++++++++---
 net/packet/af_packet.c  | 16 ++++------------
 2 files changed, 17 insertions(+), 15 deletions(-)
include/linux/if_vlan.h +13 -3
index 83266201746c..9f7dbbb34094 100644
@@ -587,13 +587,16 @@ static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
  * vlan_get_protocol - get protocol EtherType.
  * @skb: skbuff to query
  * @type: first vlan protocol
+ * @mac_offset: MAC offset
  * @depth: buffer to store length of eth and vlan tags in bytes
  *
  * Returns the EtherType of the packet, regardless of whether it is
  * vlan encapsulated (normal or hardware accelerated) or not.
  */
-static inline __be16 __vlan_get_protocol(const struct sk_buff *skb, __be16 type,
-					 int *depth)
+static inline __be16 __vlan_get_protocol_offset(const struct sk_buff *skb,
+						__be16 type,
+						int mac_offset,
+						int *depth)
 {
 	unsigned int vlan_depth = skb->mac_len, parse_depth = VLAN_MAX_DEPTH;
 
@@ -612,7 +615,8 @@ static inline __be16 __vlan_get_protocol(const struct sk_buff *skb, __be16 type,
 		do {
 			struct vlan_hdr vhdr, *vh;
 
-			vh = skb_header_pointer(skb, vlan_depth, sizeof(vhdr), &vhdr);
+			vh = skb_header_pointer(skb, mac_offset + vlan_depth,
+						sizeof(vhdr), &vhdr);
 			if (unlikely(!vh || !--parse_depth))
 				return 0;
 
@@ -627,6 +631,12 @@ static inline __be16 __vlan_get_protocol(const struct sk_buff *skb, __be16 type,
 	return type;
 }
 
+static inline __be16 __vlan_get_protocol(const struct sk_buff *skb, __be16 type,
+					 int *depth)
+{
+	return __vlan_get_protocol_offset(skb, type, 0, depth);
+}
+
 /**
  * vlan_get_protocol - get protocol EtherType.
  * @skb: skbuff to query
net/packet/af_packet.c +4 -12
index 224ac9a3482c..f3bd3e126703 100644
@@ -571,21 +571,13 @@ static u16 vlan_get_tci(const struct sk_buff *skb, struct net_device *dev)
 	return ntohs(vh->h_vlan_TCI);
 }
 
-static __be16 vlan_get_protocol_dgram(struct sk_buff *skb)
+static __be16 vlan_get_protocol_dgram(const struct sk_buff *skb)
 {
 	__be16 proto = skb->protocol;
 
-	if (unlikely(eth_type_vlan(proto))) {
-		u8 *skb_orig_data = skb->data;
-		int skb_orig_len = skb->len;
-
-		skb_push(skb, skb->data - skb_mac_header(skb));
-		proto = __vlan_get_protocol(skb, proto, NULL);
-		if (skb_orig_data != skb->data) {
-			skb->data = skb_orig_data;
-			skb->len = skb_orig_len;
-		}
-	}
+	if (unlikely(eth_type_vlan(proto)))
+		proto = __vlan_get_protocol_offset(skb, proto,
+						   skb_mac_offset(skb), NULL);
 
 	return proto;
 }
Signature · 1 line
2.39.5
author maintainer
#50 lore raw

PATCH 50/81 ila: serialize calls to nf_register_net_hooks()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 260466b576bca0081a7d4acecc8e93687aa22d0e ]

syzbot found a race in ila_add_mapping() [1]

commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner") attempted to fix a similar issue.

Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.

Add a mutex to make sure at most one thread is calling nf_register_net_hooks().

[1]

 BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
 BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501

CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
 <IRQ>
  __dump_stack lib/dump_stack.c:94 [inline]
  dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
  print_address_description mm/kasan/report.c:378 [inline]
  print_report+0xc3/0x620 mm/kasan/report.c:489
  kasan_report+0xd9/0x110 mm/kasan/report.c:602
  rht_key_hashfn include/linux/rhashtable.h:159 [inline]
  __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
  ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:127 [inline]
  ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
  ila_nf_input+0x1ee/0x620 net/ipv6/ila/ila_xlat.c:185
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xbb/0x200 net/netfilter/core.c:626
  nf_hook.constprop.0+0x42e/0x750 include/linux/netfilter.h:269
  NF_HOOK include/linux/netfilter.h:312 [inline]
  ipv6_rcv+0xa4/0x680 net/ipv6/ip6_input.c:309
  __netif_receive_skb_one_core+0x12e/0x1e0 net/core/dev.c:5672
  __netif_receive_skb+0x1d/0x160 net/core/dev.c:5785
  process_backlog+0x443/0x15f0 net/core/dev.c:6117
  __napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6883
  napi_poll net/core/dev.c:6952 [inline]
  net_rx_action+0xa94/0x1010 net/core/dev.c:7074
  handle_softirqs+0x213/0x8f0 kernel/softirq.c:561
  __do_softirq kernel/softirq.c:595 [inline]
  invoke_softirq kernel/softirq.c:435 [inline]
  __irq_exit_rcu+0x109/0x170 kernel/softirq.c:662
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
  sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049
---
 net/ipv6/ila/ila_xlat.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
net/ipv6/ila/ila_xlat.c +11 -5
index 2e7a36a1ea0a..8483116dfa23 100644
@@ -201,6 +201,8 @@ static const struct nf_hook_ops ila_nf_hook_ops[] = {
 	},
 };
 
+static DEFINE_MUTEX(ila_mutex);
+
 static int ila_add_mapping(struct net *net, struct ila_xlat_params *xp)
 {
 	struct ila_net *ilan = net_generic(net, ila_net_id);
@@ -208,16 +210,20 @@ static int ila_add_mapping(struct net *net, struct ila_xlat_params *xp)
 	spinlock_t *lock = ila_get_lock(ilan, xp->ip.locator_match);
 	int err = 0, order;
 
-	if (!ilan->xlat.hooks_registered) {
+	if (!READ_ONCE(ilan->xlat.hooks_registered)) {
 		/* We defer registering net hooks in the namespace until the
 		 * first mapping is added.
 		 */
-		err = nf_register_net_hooks(net, ila_nf_hook_ops,
-					    ARRAY_SIZE(ila_nf_hook_ops));
+		mutex_lock(&ila_mutex);
+		if (!ilan->xlat.hooks_registered) {
+			err = nf_register_net_hooks(net, ila_nf_hook_ops,
+						ARRAY_SIZE(ila_nf_hook_ops));
+			if (!err)
+				WRITE_ONCE(ilan->xlat.hooks_registered, true);
+		}
+		mutex_unlock(&ila_mutex);
 		if (err)
 			return err;
-
-		ilan->xlat.hooks_registered = true;
 	}
 
 	ila = kzalloc(sizeof(*ila), GFP_KERNEL);
Signature · 1 line
2.39.5
author maintainer
#51 lore raw

PATCH 51/81 btrfs: rename and export __btrfs_cow_block()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Filipe Manana <[email protected]>

[ Upstream commit 95f93bc4cbcac6121a5ee85cd5019ee8e7447e0b ]

Rename and export __btrfs_cow_block() as btrfs_force_cow_block(). This is to allow to move defrag specific code out of ctree.c and into defrag.c in one of the next patches.

Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled")

---
 fs/btrfs/ctree.c | 30 +++++++++++++++---------------
 fs/btrfs/ctree.h |  7 +++++++
 2 files changed, 22 insertions(+), 15 deletions(-)
fs/btrfs/ctree.c +15 -15
index 347934eb5198..a02b41106257 100644
@@ -404,13 +404,13 @@ static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
  * bytes the allocator should try to find free next to the block it returns.
  * This is just a hint and may be ignored by the allocator.
  */
-static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
-			     struct btrfs_root *root,
-			     struct extent_buffer *buf,
-			     struct extent_buffer *parent, int parent_slot,
-			     struct extent_buffer **cow_ret,
-			     u64 search_start, u64 empty_size,
-			     enum btrfs_lock_nesting nest)
+int btrfs_force_cow_block(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root,
+			  struct extent_buffer *buf,
+			  struct extent_buffer *parent, int parent_slot,
+			  struct extent_buffer **cow_ret,
+			  u64 search_start, u64 empty_size,
+			  enum btrfs_lock_nesting nest)
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct btrfs_disk_key disk_key;
@@ -559,7 +559,7 @@ static inline int should_cow_block(struct btrfs_trans_handle *trans,
 }
 
 /*
- * cows a single block, see __btrfs_cow_block for the real work.
+ * COWs a single block, see btrfs_force_cow_block() for the real work.
  * This version of it has extra checks so that a block isn't COWed more than
  * once per transaction, as long as it hasn't been written yet
  */
@@ -612,8 +612,8 @@ noinline int btrfs_cow_block(struct btrfs_trans_handle *trans,
 	 * Also We don't care about the error, as it's handled internally.
 	 */
 	btrfs_qgroup_trace_subtree_after_cow(trans, root, buf);
-	ret = __btrfs_cow_block(trans, root, buf, parent,
-				 parent_slot, cow_ret, search_start, 0, nest);
+	ret = btrfs_force_cow_block(trans, root, buf, parent, parent_slot,
+				    cow_ret, search_start, 0, nest);
 
 	trace_btrfs_cow_block(root, buf, *cow_ret);
 
@@ -764,11 +764,11 @@ int btrfs_realloc_node(struct btrfs_trans_handle *trans,
 			search_start = last_block;
 
 		btrfs_tree_lock(cur);
-		err = __btrfs_cow_block(trans, root, cur, parent, i,
-					&cur, search_start,
-					min(16 * blocksize,
-					    (end_slot - i) * blocksize),
-					BTRFS_NESTING_COW);
+		err = btrfs_force_cow_block(trans, root, cur, parent, i,
+					    &cur, search_start,
+					    min(16 * blocksize,
+						(end_slot - i) * blocksize),
+					    BTRFS_NESTING_COW);
 		if (err) {
 			btrfs_tree_unlock(cur);
 			free_extent_buffer(cur);
fs/btrfs/ctree.h +7 -0
index cab023927b43..da8986e0c422 100644
@@ -3032,6 +3032,13 @@ int btrfs_cow_block(struct btrfs_trans_handle *trans,
 		    struct extent_buffer *parent, int parent_slot,
 		    struct extent_buffer **cow_ret,
 		    enum btrfs_lock_nesting nest);
+int btrfs_force_cow_block(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root,
+			  struct extent_buffer *buf,
+			  struct extent_buffer *parent, int parent_slot,
+			  struct extent_buffer **cow_ret,
+			  u64 search_start, u64 empty_size,
+			  enum btrfs_lock_nesting nest);
 int btrfs_copy_root(struct btrfs_trans_handle *trans,
 		      struct btrfs_root *root,
 		      struct extent_buffer *buf,
Signature · 1 line
2.39.5
author maintainer
#52 lore raw

PATCH 52/81 btrfs: fix use-after-free when COWing tree bock and tracing is enabled

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Filipe Manana <[email protected]>

[ Upstream commit 44f52bbe96dfdbe4aca3818a2534520082a07040 ]

When a COWing a tree block, at btrfs_cow_block(), and we have the tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled (CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent buffer while inside the tracepoint code. This is because in some paths that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding the last reference on the extent buffer @buf so btrfs_force_cow_block() drops the last reference on the @buf extent buffer when it calls free_extent_buffer_stale(buf), which schedules the release of the extent buffer with RCU. This means that if we are on a kernel with preemption, the current task may be preempted before calling trace_btrfs_cow_block() and the extent buffer already released by the time trace_btrfs_cow_block() is called, resulting in a use-after-free.

Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to btrfs_force_cow_block() before the COWed extent buffer is freed. This also has a side effect of invoking the tracepoint in the tree defrag code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is called there, but this is fine and it was actually missing there.

---
 fs/btrfs/ctree.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
fs/btrfs/ctree.c +4 -7
index a02b41106257..c7171b286de7 100644
@@ -520,6 +520,8 @@ int btrfs_force_cow_block(struct btrfs_trans_handle *trans,
 		btrfs_free_tree_block(trans, btrfs_root_id(root), buf,
 				      parent_start, last_ref);
 	}
+
+	trace_btrfs_cow_block(root, buf, cow);
 	if (unlock_orig)
 		btrfs_tree_unlock(buf);
 	free_extent_buffer_stale(buf);
@@ -571,7 +573,6 @@ noinline int btrfs_cow_block(struct btrfs_trans_handle *trans,
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	u64 search_start;
-	int ret;
 
 	if (unlikely(test_bit(BTRFS_ROOT_DELETING, &root->state))) {
 		btrfs_abort_transaction(trans, -EUCLEAN);
@@ -612,12 +613,8 @@ noinline int btrfs_cow_block(struct btrfs_trans_handle *trans,
 	 * Also We don't care about the error, as it's handled internally.
 	 */
 	btrfs_qgroup_trace_subtree_after_cow(trans, root, buf);
-	ret = btrfs_force_cow_block(trans, root, buf, parent, parent_slot,
-				    cow_ret, search_start, 0, nest);
-
-	trace_btrfs_cow_block(root, buf, *cow_ret);
-
-	return ret;
+	return btrfs_force_cow_block(trans, root, buf, parent, parent_slot,
+				     cow_ret, search_start, 0, nest);
 }
 ALLOW_ERROR_INJECTION(btrfs_cow_block, ERRNO);
 
Signature · 1 line
2.39.5
author maintainer
#53 lore raw

PATCH 53/81 wifi: mac80211: wake the queues in case of failure in resume

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <[email protected]>

[ Upstream commit 220bf000530f9b1114fa2a1022a871c7ce8a0b38 ]

In case we fail to resume, we'll WARN with
"Hardware became unavailable during restart." and we'll wait until user space does something. It'll typically bring the interface down and up to recover. This won't work though because the queues are still stopped on IEEE80211_QUEUE_STOP_REASON_SUSPEND reason.
Make sure we clear that reason so that we give a chance to the recovery to succeed.

---
 net/mac80211/util.c | 3 +++
 1 file changed, 3 insertions(+)
net/mac80211/util.c +3 -0
index 738f1f139a90..e8326e09d1b3 100644
@@ -2436,6 +2436,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 			WARN(1, "Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.\n");
 		else
 			WARN(1, "Hardware became unavailable during restart.\n");
+		ieee80211_wake_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
+						IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+						false);
 		ieee80211_handle_reconfig_failure(local);
 		return res;
 	}
Signature · 1 line
2.39.5
author maintainer
#54 lore raw

PATCH 54/81 drm/amdkfd: Correct the migration DMA map direction

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Prike Liang <[email protected]>

[ Upstream commit 5c3de6b02d38eb9386edf50490e050bb44398e40 ]

The SVM DMA device map direction should be set the same as the DMA unmap setting, otherwise the DMA core will report the following warning.

Before finialize this solution, there're some discussion on the DMA mapping type(stream-based or coherent) in this KFD migration case, followed by https://lore.kernel.org/all/04d4ab32
[email protected]/T/.

As there's no dma_sync_single_for_*() in the DMA buffer accessed that because this migration operation should be sync properly and automatically. Give that there's might not be a performance problem in various cache sync policy of DMA sync. Therefore, in order to simplify the DMA direction setting alignment, let's set the DMA map direction as BIDIRECTIONAL.

[  150.834218] WARNING: CPU: 8 PID: 1812 at kernel/dma/debug.c:1028 check_unmap+0x1cc/0x930
[  150.834225] Modules linked in: amdgpu(OE) amdxcp drm_exec(OE) gpu_sched drm_buddy(OE) drm_ttm_helper(OE) ttm(OE) drm_suballoc_helper(OE) drm_display_helper(OE) drm_kms_helper(OE) i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc sch_fq_codel intel_rapl_msr amd_atl intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd snd_pci_acp6x snd_hda_codec snd_acp_config snd_hda_core snd_hwdep snd_soc_acpi kvm_amd sunrpc snd_pcm kvm binfmt_misc snd_seq_midi crct10dif_pclmul snd_seq_midi_event ghash_clmulni_intel sha512_ssse3 snd_rawmidi nls_iso8859_1 sha256_ssse3 sha1_ssse3 snd_seq aesni_intel snd_seq_device crypto_simd snd_timer cryptd input_leds
[  150.834310]  wmi_bmof serio_raw k10temp rapl snd sp5100_tco ipmi_devintf soundcore ccp ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport efi_pstore drm(OE) ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii
[  150.834354] CPU: 8 PID: 1812 Comm: rocrtst64 Tainted: G           OE      6.10.0-custom #492
[  150.834358] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021
[  150.834360] RIP: 0010:check_unmap+0x1cc/0x930
[  150.834363] Code: c0 4c 89 4d c8 e8 34 bf 86 00 4c 8b 4d c8 4c 8b 45 c0 48 8b 4d b8 48 89 c6 41 57 4c 89 ea 48 c7 c7 80 49 b4 84 e8 b4 81 f3 ff <0f> 0b 48 c7 c7 04 83 ac 84 e8 76 ba fc ff 41 8b 76 4c 49 8d 7e 50
[  150.834365] RSP: 0018:ffffaac5023739e0 EFLAGS: 00010086
[  150.834368] RAX: 0000000000000000 RBX: ffffffff8566a2e0 RCX: 0000000000000027
[  150.834370] RDX: ffff8f6a8f621688 RSI: 0000000000000001 RDI: ffff8f6a8f621680
[  150.834372] RBP: ffffaac502373a30 R08: 00000000000000c9 R09: ffffaac502373850
[  150.834373] R10: ffffaac502373848 R11: ffffffff84f46328 R12: ffffaac502373a40
[  150.834375] R13: ffff8f6741045330 R14: ffff8f6741a77700 R15: ffffffff84ac831b
[  150.834377] FS:  00007faf0fc94c00(0000) GS:ffff8f6a8f600000(0000) knlGS:0000000000000000
[  150.834379] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  150.834381] CR2: 00007faf0b600020 CR3: 000000010a52e000 CR4: 0000000000350ef0
[  150.834383] Call Trace:
[  150.834385]  <TASK>
[  150.834387]  ? show_regs+0x6d/0x80
[  150.834393]  ? __warn+0x8c/0x140
[  150.834397]  ? check_unmap+0x1cc/0x930
[  150.834400]  ? report_bug+0x193/0x1a0
[  150.834406]  ? handle_bug+0x46/0x80
[  150.834410]  ? exc_invalid_op+0x1d/0x80
[  150.834413]  ? asm_exc_invalid_op+0x1f/0x30
[  150.834420]  ? check_unmap+0x1cc/0x930
[  150.834425]  debug_dma_unmap_page+0x86/0x90
[  150.834431]  ? srso_return_thunk+0x5/0x5f
[  150.834435]  ? rmap_walk+0x28/0x50
[  150.834438]  ? srso_return_thunk+0x5/0x5f
[  150.834441]  ? remove_migration_ptes+0x79/0x80
[  150.834445]  ? srso_return_thunk+0x5/0x5f
[  150.834448]  dma_unmap_page_attrs+0xfa/0x1d0
[  150.834453]  svm_range_dma_unmap_dev+0x8a/0xf0 [amdgpu]
[  150.834710]  svm_migrate_ram_to_vram+0x361/0x740 [amdgpu]
[  150.834914]  svm_migrate_to_vram+0xa8/0xe0 [amdgpu]
[  150.835111]  svm_range_set_attr+0xff2/0x1450 [amdgpu]
[  150.835311]  svm_ioctl+0x4a/0x50 [amdgpu]
[  150.835510]  kfd_ioctl_svm+0x54/0x90 [amdgpu]
[  150.835701]  kfd_ioctl+0x3c2/0x530 [amdgpu]
[  150.835888]  ? __pfx_kfd_ioctl_svm+0x10/0x10 [amdgpu]
[  150.836075]  ? srso_return_thunk+0x5/0x5f
[  150.836080]  ? tomoyo_file_ioctl+0x20/0x30
[  150.836086]  __x64_sys_ioctl+0x9c/0xd0
[  150.836091]  x64_sys_call+0x1219/0x20d0
[  150.836095]  do_syscall_64+0x51/0x120
[  150.836098]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  150.836102] RIP: 0033:0x7faf0f11a94f
[  150.836105] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[  150.836107] RSP: 002b:00007ffeced26bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  150.836110] RAX: ffffffffffffffda RBX: 000055c683528fb0 RCX: 00007faf0f11a94f
[  150.836112] RDX: 00007ffeced26c60 RSI: 00000000c0484b20 RDI: 0000000000000003
[  150.836114] RBP: 00007ffeced26c50 R08: 0000000000000000 R09: 0000000000000001
[  150.836115] R10: 0000000000000032 R11: 0000000000000246 R12: 000055c683528bd0
[  150.836117] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000000
[  150.836122]  </TASK>
[  150.836124] ---[ end trace 0000000000000000 ]---
---
 drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +2 -2
index 8a7705db0b9a..a7ed47cb5bf6 100644
@@ -324,7 +324,7 @@ svm_migrate_copy_to_vram(struct amdgpu_device *adev, struct svm_range *prange,
 		spage = migrate_pfn_to_page(migrate->src[i]);
 		if (spage && !is_zone_device_page(spage)) {
 			src[i] = dma_map_page(dev, spage, 0, PAGE_SIZE,
-					      DMA_TO_DEVICE);
+					      DMA_BIDIRECTIONAL);
 			r = dma_mapping_error(dev, src[i]);
 			if (r) {
 				dev_err(adev->dev, "%s: fail %d dma_map_page\n",
@@ -623,7 +623,7 @@ svm_migrate_copy_to_ram(struct amdgpu_device *adev, struct svm_range *prange,
 			goto out_oom;
 		}
 
-		dst[i] = dma_map_page(dev, dpage, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+		dst[i] = dma_map_page(dev, dpage, 0, PAGE_SIZE, DMA_BIDIRECTIONAL);
 		r = dma_mapping_error(dev, dst[i]);
 		if (r) {
 			dev_err(adev->dev, "%s: fail %d dma_map_page\n", __func__, r);
Signature · 1 line
2.39.5
author maintainer
#55 lore raw

PATCH 55/81 btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Filipe Manana <[email protected]>

[ Upstream commit f10bef73fb355e3fc85e63a50386798be68ff486 ]

During the unmount path, at close_ctree(), we first stop the cleaner kthread, using kthread_stop() which frees the associated task_struct, and then stop and destroy all the work queues. However after we stopped the cleaner we may still have a worker from the delalloc_workers queue running inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(), which in turn tries to wake up the cleaner kthread - which was already destroyed before, resulting in a use-after-free on the task_struct.

Syzbot reported this with the following stack traces:

  BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
  Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52

  CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.13.0-rc1-syzkaller-00002-gcdd30ebb1b9f #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
  Workqueue: btrfs-delalloc btrfs_work_helper
  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:94 [inline]
   dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
   print_address_description mm/kasan/report.c:378 [inline]
   print_report+0x169/0x550 mm/kasan/report.c:489
   kasan_report+0x143/0x180 mm/kasan/report.c:602
   __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
   lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
   __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
   _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
   class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
   try_to_wake_up+0xc2/0x1470 kernel/sched/core.c:4205
   submit_compressed_extents+0xdf/0x16e0 fs/btrfs/inode.c:1615
   run_ordered_work fs/btrfs/async-thread.c:288 [inline]
   btrfs_work_helper+0x96f/0xc40 fs/btrfs/async-thread.c:324
   process_one_work kernel/workqueue.c:3229 [inline]
   process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
   worker_thread+0x870/0xd30 kernel/workqueue.c:3391
   kthread+0x2f0/0x390 kernel/kthread.c:389
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
   </TASK>

  Allocated by task 2:
   kasan_save_stack mm/kasan/common.c:47 [inline]
   kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
   unpoison_slab_object mm/kasan/common.c:319 [inline]
   __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345
   kasan_slab_alloc include/linux/kasan.h:250 [inline]
   slab_post_alloc_hook mm/slub.c:4104 [inline]
   slab_alloc_node mm/slub.c:4153 [inline]
   kmem_cache_alloc_node_noprof+0x1d9/0x380 mm/slub.c:4205
   alloc_task_struct_node kernel/fork.c:180 [inline]
   dup_task_struct+0x57/0x8c0 kernel/fork.c:1113
   copy_process+0x5d1/0x3d50 kernel/fork.c:2225
   kernel_clone+0x223/0x870 kernel/fork.c:2807
   kernel_thread+0x1bc/0x240 kernel/fork.c:2869
   create_kthread kernel/kthread.c:412 [inline]
   kthreadd+0x60d/0x810 kernel/kthread.c:767
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

  Freed by task 24:
   kasan_save_stack mm/kasan/common.c:47 [inline]
   kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
   kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
   poison_slab_object mm/kasan/common.c:247 [inline]
   __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
   kasan_slab_free include/linux/kasan.h:233 [inline]
   slab_free_hook mm/slub.c:2338 [inline]
   slab_free mm/slub.c:4598 [inline]
   kmem_cache_free+0x195/0x410 mm/slub.c:4700
   put_task_struct include/linux/sched/task.h:144 [inline]
   delayed_put_task_struct+0x125/0x300 kernel/exit.c:227
   rcu_do_batch kernel/rcu/tree.c:2567 [inline]
   rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823
   handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:554
   run_ksoftirqd+0xca/0x130 kernel/softirq.c:943
   smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
   kthread+0x2f0/0x390 kernel/kthread.c:389
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

  Last potentially related work creation:
   kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
   __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:544
   __call_rcu_common kernel/rcu/tree.c:3086 [inline]
   call_rcu+0x167/0xa70 kernel/rcu/tree.c:3190
   context_switch kernel/sched/core.c:5372 [inline]
   __schedule+0x1803/0x4be0 kernel/sched/core.c:6756
   __schedule_loop kernel/sched/core.c:6833 [inline]
   schedule+0x14b/0x320 kernel/sched/core.c:6848
   schedule_timeout+0xb0/0x290 kernel/time/sleep_timeout.c:75
   do_wait_for_common kernel/sched/completion.c:95 [inline]
   __wait_for_common kernel/sched/completion.c:116 [inline]
   wait_for_common kernel/sched/completion.c:127 [inline]
   wait_for_completion+0x355/0x620 kernel/sched/completion.c:148
   kthread_stop+0x19e/0x640 kernel/kthread.c:712
   close_ctree+0x524/0xd60 fs/btrfs/disk-io.c:4328
   generic_shutdown_super+0x139/0x2d0 fs/super.c:642
   kill_anon_super+0x3b/0x70 fs/super.c:1237
   btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2112
   deactivate_locked_super+0xc4/0x130 fs/super.c:473
   cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
   task_work_run+0x24f/0x310 kernel/task_work.c:239
   ptrace_notify+0x2d2/0x380 kernel/signal.c:2503
   ptrace_report_syscall include/linux/ptrace.h:415 [inline]
   ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
   syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
   syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
   __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
   syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
   do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
   entry_SYSCALL_64_after_hwframe+0x77/0x7f

  The buggy address belongs to the object at ffff8880259d1e00
   which belongs to the cache task_struct of size 7424
  The buggy address is located 2584 bytes inside of
   freed 7424-byte region [ffff8880259d1e00, ffff8880259d3b00)

  The buggy address belongs to the physical page:
  page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x259d0
  head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
  memcg:ffff88802f4b56c1
  flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
  page_type: f5(slab)
  raw: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122
  raw: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1
  head: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122
  head: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1
  head: 00fff00000000003 ffffea0000967401 ffffffffffffffff 0000000000000000
  head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: kasan: bad access detected
  page_owner tracks the page as allocated
  page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 12, tgid 12 (kworker/u8:1), ts 7328037942, free_ts 0
   set_page_owner include/linux/page_owner.h:32 [inline]
   post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1556
   prep_new_page mm/page_alloc.c:1564 [inline]
   get_page_from_freelist+0x3651/0x37a0 mm/page_alloc.c:3474
   __alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4751
   alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
   alloc_slab_page+0x6a/0x140 mm/slub.c:2408
   allocate_slab+0x5a/0x2f0 mm/slub.c:2574
   new_slab mm/slub.c:2627 [inline]
   ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3815
   __slab_alloc+0x58/0xa0 mm/slub.c:3905
   __slab_alloc_node mm/slub.c:3980 [inline]
   slab_alloc_node mm/slub.c:4141 [inline]
   kmem_cache_alloc_node_noprof+0x269/0x380 mm/slub.c:4205
   alloc_task_struct_node kernel/fork.c:180 [inline]
   dup_task_struct+0x57/0x8c0 kernel/fork.c:1113
   copy_process+0x5d1/0x3d50 kernel/fork.c:2225
   kernel_clone+0x223/0x870 kernel/fork.c:2807
   user_mode_thread+0x132/0x1a0 kernel/fork.c:2885
   call_usermodehelper_exec_work+0x5c/0x230 kernel/umh.c:171
   process_one_work kernel/workqueue.c:3229 [inline]
   process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
   worker_thread+0x870/0xd30 kernel/workqueue.c:3391
  page_owner free stack trace missing

  Memory state around the buggy address:
   ffff8880259d2700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff8880259d2780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  >ffff8880259d2800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                              ^
   ffff8880259d2880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff8880259d2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ==================================================================

Fix this by flushing the delalloc workers queue before stopping the cleaner kthread.

---
 fs/btrfs/disk-io.c | 9 +++++++++
 1 file changed, 9 insertions(+)
fs/btrfs/disk-io.c +9 -0
index b7ec38f7e4b9..30fe5ebc3650 100644
@@ -4651,6 +4651,15 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info)
 	 * already the cleaner, but below we run all pending delayed iputs.
 	 */
 	btrfs_flush_workqueue(fs_info->fixup_workers);
+	/*
+	 * Similar case here, we have to wait for delalloc workers before we
+	 * proceed below and stop the cleaner kthread, otherwise we trigger a
+	 * use-after-tree on the cleaner kthread task_struct when a delalloc
+	 * worker running submit_compressed_extents() adds a delayed iput, which
+	 * does a wake up on the cleaner kthread, which was already freed below
+	 * when we call kthread_stop().
+	 */
+	btrfs_flush_workqueue(fs_info->delalloc_workers);
 
 	/*
 	 * After we parked the cleaner kthread, ordered extents may have
Signature · 1 line
2.39.5
author maintainer
#56 lore raw

PATCH 56/81 ALSA: hda/realtek: Add new alc2xx-fixup-headset-mic model

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vasiliy Kovalev <[email protected]>

[ Upstream commit 50db91fccea0da5c669bc68e2429e8de303758d3 ]

Introduces the alc2xx-fixup-headset-mic model to simplify enabling headset microphones on ALC2XX codecs.

Many recent configurations, as well as older systems that lacked this fix for a long time, leave headset microphones inactive by default. This addition provides a flexible workaround using the existing ALC2XX_FIXUP_HEADSET_MIC quirk.

---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
index ef9b0cc339f2..0fd61a165edb 100644
@@ -10443,6 +10443,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, .name = "alc255-acer-headphone-and-mic"},
 	{.id = ALC285_FIXUP_HP_GPIO_AMP_INIT, .name = "alc285-hp-amp-init"},
 	{.id = ALC236_FIXUP_LENOVO_INV_DMIC, .name = "alc236-fixup-lenovo-inv-mic"},
+	{.id = ALC2XX_FIXUP_HEADSET_MIC, .name = "alc2xx-fixup-headset-mic"},
 	{}
 };
 #define ALC225_STANDARD_PINS \
Signature · 1 line
2.39.5
author maintainer
#57 lore raw

PATCH 57/81 sound: usb: enable DSD output for ddHiFi TC44C

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adrian Ratiu <[email protected]>

[ Upstream commit c84bd6c810d1880194fea2229c7086e4b73fddc1 ]

This is a UAC 2 DAC capable of raw DSD on intf 2 alt 4:

Bus 007 Device 004: ID 262a:9302 SAVITECH Corp. TC44C Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 [unknown]
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x262a SAVITECH Corp.
idProduct 0x9302 TC44C
bcdDevice 0.01

  iManufacturer           1 DDHIFI
  iProduct                2 TC44C
  iSerial                 6 5000000001

.......
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 32
iInterface 0
AudioStreaming Interface Descriptor:
bLength 16
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bmControls 0x00
bFormatType 1
bmFormats 0x80000000
bNrChannels 2
bmChannelConfig 0x00000000
iChannelNames 0
.......

---
 sound/usb/quirks.c | 2 ++
 1 file changed, 2 insertions(+)
sound/usb/quirks.c +2 -0
index 673591fbf917..6525b02af1b0 100644
@@ -2223,6 +2223,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_DSD_RAW),
 	DEVICE_FLG(0x2522, 0x0007, /* LH Labs Geek Out HD Audio 1V5 */
 		   QUIRK_FLAG_SET_IFACE_FIRST),
+	DEVICE_FLG(0x262a, 0x9302, /* ddHiFi TC44C */
+		   QUIRK_FLAG_DSD_RAW),
 	DEVICE_FLG(0x2708, 0x0002, /* Audient iD14 */
 		   QUIRK_FLAG_IGNORE_CTL_ERROR),
 	DEVICE_FLG(0x2912, 0x30c8, /* Audioengine D1 */
Signature · 1 line
2.39.5
author maintainer
#58 lore raw

PATCH 58/81 sound: usb: format: dont warn that raw DSD is unsupported

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adrian Ratiu <[email protected]>

[ Upstream commit b50a3e98442b8d72f061617c7f7a71f7dba19484 ]

UAC 2 & 3 DAC's set bit 31 of the format to signal support for a RAW_DATA type, typically used for DSD playback.

This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA), fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(), however a confusing and unnecessary message gets printed because the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }

For example the output:

usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0 usb 7-1: 2:4 : unsupported format bits 0x100000000

This last "unsupported format" is actually wrong: we know the format is a RAW_DATA which we assume is DSD, so there is no need to print the confusing message.

This we unset bit 31 of the format after recognizing it, to avoid the message.

---
 sound/usb/format.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
sound/usb/format.c +6 -1
index 3b45d0ee7693..3b3a5ea6fcbf 100644
@@ -60,6 +60,8 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
 			pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
 			/* flag potentially raw DSD capable altsettings */
 			fp->dsd_raw = true;
+			/* clear special format bit to avoid "unsupported format" msg below */
+			format &= ~UAC2_FORMAT_TYPE_I_RAW_DATA;
 		}
 
 		format <<= 1;
@@ -71,8 +73,11 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
 		sample_width = as->bBitResolution;
 		sample_bytes = as->bSubslotSize;
 
-		if (format & UAC3_FORMAT_TYPE_I_RAW_DATA)
+		if (format & UAC3_FORMAT_TYPE_I_RAW_DATA) {
 			pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
+			/* clear special format bit to avoid "unsupported format" msg below */
+			format &= ~UAC3_FORMAT_TYPE_I_RAW_DATA;
+		}
 
 		format <<= 1;
 		break;
Signature · 1 line
2.39.5
author maintainer
#59 lore raw

PATCH 59/81 bpf: fix potential error return

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anton Protopopov <[email protected]>

[ Upstream commit c4441ca86afe4814039ee1b32c39d833c1a16bbc ]

The bpf_remove_insns() function returns WARN_ON_ONCE(error), where error is a result of bpf_adj_branches(), and thus should be always 0 However, if for any reason it is not 0, then it will be converted to boolean by WARN_ON_ONCE and returned to user space as 1, not an actual error value. Fix this by returning the original err after the WARN check.

---
 kernel/bpf/core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
kernel/bpf/core.c +5 -1
index 0ea0d50a7c16..83b416af4da1 100644
@@ -523,6 +523,8 @@ struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
 
 int bpf_remove_insns(struct bpf_prog *prog, u32 off, u32 cnt)
 {
+	int err;
+
 	/* Branch offsets can't overflow when program is shrinking, no need
 	 * to call bpf_adj_branches(..., true) here
 	 */
@@ -530,7 +532,9 @@ int bpf_remove_insns(struct bpf_prog *prog, u32 off, u32 cnt)
 		sizeof(struct bpf_insn) * (prog->len - off - cnt));
 	prog->len -= cnt;
 
-	return WARN_ON_ONCE(bpf_adj_branches(prog, off, off + cnt, off, false));
+	err = bpf_adj_branches(prog, off, off + cnt, off, false);
+	WARN_ON_ONCE(err);
+	return err;
 }
 
 static void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp)
Signature · 1 line
2.39.5
author maintainer
#60 lore raw

PATCH 60/81 ksmbd: retry iterate_dir in smb2_query_dir

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hobin Woo <[email protected]>

[ Upstream commit 2b904d61a97e8ba79e3bc216ba290fd7e1d85028 ]

Some file systems do not ensure that the single call of iterate_dir reaches the end of the directory. For example, FUSE fetches entries from a daemon using 4KB buffer and stops fetching if entries exceed the buffer. And then an actor of caller, KSMBD, is used to fill the entries from the buffer.
Thus, pattern searching on FUSE, files located after the 4KB could not be found and STATUS_NO_SUCH_FILE was returned.

---
 fs/smb/server/smb2pdu.c | 12 +++++++++++-
 fs/smb/server/vfs.h     |  1 +
 2 files changed, 12 insertions(+), 1 deletion(-)
fs/smb/server/smb2pdu.c +11 -1
index 96d441ca511d..71478a590e83 100644
@@ -3988,6 +3988,7 @@ static bool __query_dir(struct dir_context *ctx, const char *name, int namlen,
 	/* dot and dotdot entries are already reserved */
 	if (!strcmp(".", name) || !strcmp("..", name))
 		return true;
+	d_info->num_scan++;
 	if (ksmbd_share_veto_filename(priv->work->tcon->share_conf, name))
 		return true;
 	if (!match_pattern(name, namlen, priv->search_pattern))
@@ -4148,8 +4149,17 @@ int smb2_query_dir(struct ksmbd_work *work)
 	query_dir_private.info_level		= req->FileInformationClass;
 	dir_fp->readdir_data.private		= &query_dir_private;
 	set_ctx_actor(&dir_fp->readdir_data.ctx, __query_dir);
-
+again:
+	d_info.num_scan = 0;
 	rc = iterate_dir(dir_fp->filp, &dir_fp->readdir_data.ctx);
+	/*
+	 * num_entry can be 0 if the directory iteration stops before reaching
+	 * the end of the directory and no file is matched with the search
+	 * pattern.
+	 */
+	if (rc >= 0 && !d_info.num_entry && d_info.num_scan &&
+	    d_info.out_buf_len > 0)
+		goto again;
 	/*
 	 * req->OutputBufferLength is too small to contain even one entry.
 	 * In this case, it immediately returns OutputBufferLength 0 to client.
fs/smb/server/vfs.h +1 -0
index e761dde2443e..cc47e71c4de1 100644
@@ -43,6 +43,7 @@ struct ksmbd_dir_info {
 	char		*rptr;
 	int		name_len;
 	int		out_buf_len;
+	int		num_scan;
 	int		num_entry;
 	int		data_count;
 	int		last_entry_offset;
Signature · 1 line
2.39.5
author maintainer
#61 lore raw

PATCH 61/81 net: usb: qmi_wwan: add Telit FE910C04 compositions

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <[email protected]>

[ Upstream commit 3b58b53a26598209a7ad8259a5114ce71f7c3d64 ]

Add the following Telit FE910C04 compositions:

0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)

T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c0 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag)

T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c4 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb

T:  Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c8 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/net/usb/qmi_wwan.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/usb/qmi_wwan.c +3 -0
index 8b9e2888b310..65aefebdf9a9 100644
@@ -1372,6 +1372,9 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a0, 0)}, /* Telit FN920C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a4, 0)}, /* Telit FN920C04 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a9, 0)}, /* Telit FN920C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c0, 0)}, /* Telit FE910C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c4, 0)}, /* Telit FE910C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c8, 0)}, /* Telit FE910C04 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
Signature · 1 line
2.39.5
author maintainer
#62 lore raw

PATCH 62/81 Bluetooth: hci_core: Fix sleeping function called from invalid context

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 4d94f05558271654670d18c26c912da0c1c15549 ]

This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585

in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
4 locks held by kworker/u9:2/5070:
#0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 #2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915

CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: hci0 hci_rx_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187
 __mutex_lock_common kernel/locking/mutex.c:585 [inline]
 __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752
 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline]
 hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939
 hci_event_func net/bluetooth/hci_event.c:7514 [inline]
 hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569
 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335
 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
 kthread+0x2f0/0x390 kernel/kthread.c:388
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
 </TASK>
---
 include/net/bluetooth/hci_core.h | 108 ++++++++++++++++++++-----------
 net/bluetooth/hci_core.c         |  10 +--
 net/bluetooth/iso.c              |   6 ++
 net/bluetooth/l2cap_core.c       |  12 ++--
 net/bluetooth/rfcomm/core.c      |   6 ++
 net/bluetooth/sco.c              |  12 ++--
 6 files changed, 97 insertions(+), 57 deletions(-)
include/net/bluetooth/hci_core.h +70 -38
index d26b57e87f7f..b37e95554271 100644
@@ -815,7 +815,6 @@ struct hci_conn_params {
 extern struct list_head hci_dev_list;
 extern struct list_head hci_cb_list;
 extern rwlock_t hci_dev_list_lock;
-extern struct mutex hci_cb_list_lock;
 
 #define hci_dev_set_flag(hdev, nr)             set_bit((nr), (hdev)->dev_flags)
 #define hci_dev_clear_flag(hdev, nr)           clear_bit((nr), (hdev)->dev_flags)
@@ -1769,24 +1768,47 @@ struct hci_cb {
 
 	char *name;
 
+	bool (*match)		(struct hci_conn *conn);
 	void (*connect_cfm)	(struct hci_conn *conn, __u8 status);
 	void (*disconn_cfm)	(struct hci_conn *conn, __u8 status);
 	void (*security_cfm)	(struct hci_conn *conn, __u8 status,
-								__u8 encrypt);
+				 __u8 encrypt);
 	void (*key_change_cfm)	(struct hci_conn *conn, __u8 status);
 	void (*role_switch_cfm)	(struct hci_conn *conn, __u8 status, __u8 role);
 };
 
+static inline void hci_cb_lookup(struct hci_conn *conn, struct list_head *list)
+{
+	struct hci_cb *cb, *cpy;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(cb, &hci_cb_list, list) {
+		if (cb->match && cb->match(conn)) {
+			cpy = kmalloc(sizeof(*cpy), GFP_ATOMIC);
+			if (!cpy)
+				break;
+
+			*cpy = *cb;
+			INIT_LIST_HEAD(&cpy->list);
+			list_add_rcu(&cpy->list, list);
+		}
+	}
+	rcu_read_unlock();
+}
+
 static inline void hci_connect_cfm(struct hci_conn *conn, __u8 status)
 {
-	struct hci_cb *cb;
+	struct list_head list;
+	struct hci_cb *cb, *tmp;
+
+	INIT_LIST_HEAD(&list);
+	hci_cb_lookup(conn, &list);
 
-	mutex_lock(&hci_cb_list_lock);
-	list_for_each_entry(cb, &hci_cb_list, list) {
+	list_for_each_entry_safe(cb, tmp, &list, list) {
 		if (cb->connect_cfm)
 			cb->connect_cfm(conn, status);
+		kfree(cb);
 	}
-	mutex_unlock(&hci_cb_list_lock);
 
 	if (conn->connect_cfm_cb)
 		conn->connect_cfm_cb(conn, status);
@@ -1794,43 +1816,55 @@ static inline void hci_connect_cfm(struct hci_conn *conn, __u8 status)
 
 static inline void hci_disconn_cfm(struct hci_conn *conn, __u8 reason)
 {
-	struct hci_cb *cb;
+	struct list_head list;
+	struct hci_cb *cb, *tmp;
+
+	INIT_LIST_HEAD(&list);
+	hci_cb_lookup(conn, &list);
 
-	mutex_lock(&hci_cb_list_lock);
-	list_for_each_entry(cb, &hci_cb_list, list) {
+	list_for_each_entry_safe(cb, tmp, &list, list) {
 		if (cb->disconn_cfm)
 			cb->disconn_cfm(conn, reason);
+		kfree(cb);
 	}
-	mutex_unlock(&hci_cb_list_lock);
 
 	if (conn->disconn_cfm_cb)
 		conn->disconn_cfm_cb(conn, reason);
 }
 
-static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
+static inline void hci_security_cfm(struct hci_conn *conn, __u8 status,
+				    __u8 encrypt)
 {
-	struct hci_cb *cb;
-	__u8 encrypt;
-
-	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
-		return;
+	struct list_head list;
+	struct hci_cb *cb, *tmp;
 
-	encrypt = test_bit(HCI_CONN_ENCRYPT, &conn->flags) ? 0x01 : 0x00;
+	INIT_LIST_HEAD(&list);
+	hci_cb_lookup(conn, &list);
 
-	mutex_lock(&hci_cb_list_lock);
-	list_for_each_entry(cb, &hci_cb_list, list) {
+	list_for_each_entry_safe(cb, tmp, &list, list) {
 		if (cb->security_cfm)
 			cb->security_cfm(conn, status, encrypt);
+		kfree(cb);
 	}
-	mutex_unlock(&hci_cb_list_lock);
 
 	if (conn->security_cfm_cb)
 		conn->security_cfm_cb(conn, status);
 }
 
+static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
+{
+	__u8 encrypt;
+
+	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
+		return;
+
+	encrypt = test_bit(HCI_CONN_ENCRYPT, &conn->flags) ? 0x01 : 0x00;
+
+	hci_security_cfm(conn, status, encrypt);
+}
+
 static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status)
 {
-	struct hci_cb *cb;
 	__u8 encrypt;
 
 	if (conn->state == BT_CONFIG) {
@@ -1857,40 +1891,38 @@ static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status)
 			conn->sec_level = conn->pending_sec_level;
 	}
 
-	mutex_lock(&hci_cb_list_lock);
-	list_for_each_entry(cb, &hci_cb_list, list) {
-		if (cb->security_cfm)
-			cb->security_cfm(conn, status, encrypt);
-	}
-	mutex_unlock(&hci_cb_list_lock);
-
-	if (conn->security_cfm_cb)
-		conn->security_cfm_cb(conn, status);
+	hci_security_cfm(conn, status, encrypt);
 }
 
 static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status)
 {
-	struct hci_cb *cb;
+	struct list_head list;
+	struct hci_cb *cb, *tmp;
+
+	INIT_LIST_HEAD(&list);
+	hci_cb_lookup(conn, &list);
 
-	mutex_lock(&hci_cb_list_lock);
-	list_for_each_entry(cb, &hci_cb_list, list) {
+	list_for_each_entry_safe(cb, tmp, &list, list) {
 		if (cb->key_change_cfm)
 			cb->key_change_cfm(conn, status);
+		kfree(cb);
 	}
-	mutex_unlock(&hci_cb_list_lock);
 }
 
 static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status,
 								__u8 role)
 {
-	struct hci_cb *cb;
+	struct list_head list;
+	struct hci_cb *cb, *tmp;
+
+	INIT_LIST_HEAD(&list);
+	hci_cb_lookup(conn, &list);
 
-	mutex_lock(&hci_cb_list_lock);
-	list_for_each_entry(cb, &hci_cb_list, list) {
+	list_for_each_entry_safe(cb, tmp, &list, list) {
 		if (cb->role_switch_cfm)
 			cb->role_switch_cfm(conn, status, role);
+		kfree(cb);
 	}
-	mutex_unlock(&hci_cb_list_lock);
 }
 
 static inline bool hci_bdaddr_is_rpa(bdaddr_t *bdaddr, u8 addr_type)
net/bluetooth/hci_core.c +3 -7
index 3cd7c212375f..496dac042b9c 100644
@@ -58,7 +58,6 @@ DEFINE_RWLOCK(hci_dev_list_lock);
 
 /* HCI callback list */
 LIST_HEAD(hci_cb_list);
-DEFINE_MUTEX(hci_cb_list_lock);
 
 /* HCI ID Numbering */
 static DEFINE_IDA(hci_index_ida);
@@ -2978,9 +2977,7 @@ int hci_register_cb(struct hci_cb *cb)
 {
 	BT_DBG("%p name %s", cb, cb->name);
 
-	mutex_lock(&hci_cb_list_lock);
-	list_add_tail(&cb->list, &hci_cb_list);
-	mutex_unlock(&hci_cb_list_lock);
+	list_add_tail_rcu(&cb->list, &hci_cb_list);
 
 	return 0;
 }
@@ -2990,9 +2987,8 @@ int hci_unregister_cb(struct hci_cb *cb)
 {
 	BT_DBG("%p name %s", cb, cb->name);
 
-	mutex_lock(&hci_cb_list_lock);
-	list_del(&cb->list);
-	mutex_unlock(&hci_cb_list_lock);
+	list_del_rcu(&cb->list);
+	synchronize_rcu();
 
 	return 0;
 }
net/bluetooth/iso.c +6 -0
index 437cbeaa9619..f62df9097f5e 100644
@@ -1579,6 +1579,11 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags)
 	return lm;
 }
 
+static bool iso_match(struct hci_conn *hcon)
+{
+	return hcon->type == ISO_LINK || hcon->type == LE_LINK;
+}
+
 static void iso_connect_cfm(struct hci_conn *hcon, __u8 status)
 {
 	if (hcon->type != ISO_LINK) {
@@ -1748,6 +1753,7 @@ void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 
 static struct hci_cb iso_cb = {
 	.name		= "ISO",
+	.match		= iso_match,
 	.connect_cfm	= iso_connect_cfm,
 	.disconn_cfm	= iso_disconn_cfm,
 };
net/bluetooth/l2cap_core.c +6 -6
index 187c91843876..2a8051fae08c 100644
@@ -8273,6 +8273,11 @@ static struct l2cap_chan *l2cap_global_fixed_chan(struct l2cap_chan *c,
 	return NULL;
 }
 
+static bool l2cap_match(struct hci_conn *hcon)
+{
+	return hcon->type == ACL_LINK || hcon->type == LE_LINK;
+}
+
 static void l2cap_connect_cfm(struct hci_conn *hcon, u8 status)
 {
 	struct hci_dev *hdev = hcon->hdev;
@@ -8280,9 +8285,6 @@ static void l2cap_connect_cfm(struct hci_conn *hcon, u8 status)
 	struct l2cap_chan *pchan;
 	u8 dst_type;
 
-	if (hcon->type != ACL_LINK && hcon->type != LE_LINK)
-		return;
-
 	BT_DBG("hcon %p bdaddr %pMR status %d", hcon, &hcon->dst, status);
 
 	if (status) {
@@ -8347,9 +8349,6 @@ int l2cap_disconn_ind(struct hci_conn *hcon)
 
 static void l2cap_disconn_cfm(struct hci_conn *hcon, u8 reason)
 {
-	if (hcon->type != ACL_LINK && hcon->type != LE_LINK)
-		return;
-
 	BT_DBG("hcon %p reason %d", hcon, reason);
 
 	l2cap_conn_del(hcon, bt_to_errno(reason));
@@ -8637,6 +8636,7 @@ void l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 
 static struct hci_cb l2cap_cb = {
 	.name		= "L2CAP",
+	.match		= l2cap_match,
 	.connect_cfm	= l2cap_connect_cfm,
 	.disconn_cfm	= l2cap_disconn_cfm,
 	.security_cfm	= l2cap_security_cfm,
net/bluetooth/rfcomm/core.c +6 -0
index 4f54c7df3a94..1686fa60e278 100644
@@ -2130,6 +2130,11 @@ static int rfcomm_run(void *unused)
 	return 0;
 }
 
+static bool rfcomm_match(struct hci_conn *hcon)
+{
+	return hcon->type == ACL_LINK;
+}
+
 static void rfcomm_security_cfm(struct hci_conn *conn, u8 status, u8 encrypt)
 {
 	struct rfcomm_session *s;
@@ -2176,6 +2181,7 @@ static void rfcomm_security_cfm(struct hci_conn *conn, u8 status, u8 encrypt)
 
 static struct hci_cb rfcomm_cb = {
 	.name		= "RFCOMM",
+	.match		= rfcomm_match,
 	.security_cfm	= rfcomm_security_cfm
 };
 
net/bluetooth/sco.c +6 -6
index fe8728041ad0..127479bf475b 100644
@@ -1367,11 +1367,13 @@ int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags)
 	return lm;
 }
 
-static void sco_connect_cfm(struct hci_conn *hcon, __u8 status)
+static bool sco_match(struct hci_conn *hcon)
 {
-	if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
-		return;
+	return hcon->type == SCO_LINK || hcon->type == ESCO_LINK;
+}
 
+static void sco_connect_cfm(struct hci_conn *hcon, __u8 status)
+{
 	BT_DBG("hcon %p bdaddr %pMR status %u", hcon, &hcon->dst, status);
 
 	if (!status) {
@@ -1386,9 +1388,6 @@ static void sco_connect_cfm(struct hci_conn *hcon, __u8 status)
 
 static void sco_disconn_cfm(struct hci_conn *hcon, __u8 reason)
 {
-	if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
-		return;
-
 	BT_DBG("hcon %p reason %d", hcon, reason);
 
 	sco_conn_del(hcon, bt_to_errno(reason));
@@ -1414,6 +1413,7 @@ void sco_recv_scodata(struct hci_conn *hcon, struct sk_buff *skb)
 
 static struct hci_cb sco_cb = {
 	.name		= "SCO",
+	.match		= sco_match,
 	.connect_cfm	= sco_connect_cfm,
 	.disconn_cfm	= sco_disconn_cfm,
 };
Signature · 1 line
2.39.5
author maintainer
#63 lore raw

PATCH 63/81 irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Uros Bizjak <[email protected]>

[ Upstream commit a1855f1b7c33642c9f7a01991fb763342a312e9b ]

percpu_base is used in various percpu functions that expect variable in __percpu address space. Correct the declaration of percpu_base to

void __iomem * __percpu *percpu_base;

to declare the variable as __percpu pointer.

The patch fixes several sparse warnings:

irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces)
irq-gic.c:1172:44: expected void [noderef] __percpu *[noderef] __iomem *percpu_base
irq-gic.c:1172:44: got void [noderef] __iomem *[noderef] __percpu *
...
irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces)
irq-gic.c:1231:43: expected void [noderef] __percpu *__pdata
irq-gic.c:1231:43: got void [noderef] __percpu *[noderef] __iomem *percpu_base

There were no changes in the resulting object files.

---
 drivers/irqchip/irq-gic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/irqchip/irq-gic.c +1 -1
index 4c7bae0ec8f9..867b282fa95d 100644
@@ -63,7 +63,7 @@ static void gic_check_cpu_features(void)
 
 union gic_base {
 	void __iomem *common_base;
-	void __percpu * __iomem *percpu_base;
+	void __iomem * __percpu *percpu_base;
 };
 
 struct gic_chip_data {
Signature · 1 line
2.39.5
author maintainer
#64 lore raw

PATCH 64/81 ARC: build: Try to guess GCC variant of cross compiler

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <[email protected]>

[ Upstream commit 824927e88456331c7a999fdf5d9d27923b619590 ]

ARC GCC compiler is packaged starting from Fedora 39i and the GCC variant of cross compile tools has arc-linux-gnu- prefix and not arc-linux-. This is causing that CROSS_COMPILE variable is left unset.

This change allows builds without need to supply CROSS_COMPILE argument if distro package is used.

Before this change:

$ make -j 128 ARCH=arc W=1 drivers/infiniband/hw/mlx4/
  gcc: warning: ‘-mcpu=’ is deprecated; use ‘-mtune=’ or ‘-march=’ instead
  gcc: error: unrecognized command-line option ‘-mmedium-calls’
  gcc: error: unrecognized command-line option ‘-mlock’
  gcc: error: unrecognized command-line option ‘-munaligned-access’

[1] https://packages.fedoraproject.org/pkgs/cross-gcc/gcc-arc-linux-gnu/index.html

---
 arch/arc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arc/Makefile +1 -1
index 329400a1c355..8e6f52c6626d 100644
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
Signature · 1 line
2.39.5
author maintainer
#65 lore raw

PATCH 65/81 usb: xhci: Avoid queuing redundant Stop Endpoint commands

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Pecio <[email protected]>

[ Upstream commit 474538b8dd1cd9c666e56cfe8ef60fbb0fb513f4 ]

Stop Endpoint command on an already stopped endpoint fails and may be misinterpreted as a known hardware bug by the completion handler. This results in an unnecessary delay with repeated retries of the command.

Avoid queuing this command when endpoint state flags indicate that it's stopped or halted and the command will fail. If commands are pending on the endpoint, their completion handlers will process cancelled TDs so it's done. In case of waiting for external operations like clearing TT buffer, the endpoint is stopped and cancelled TDs can be processed now.

This eliminates practically all unnecessary retries because an endpoint with pending URBs is maintained in Running state by the driver, unless aforementioned commands or other operations are pending on it. This is guaranteed by xhci_ring_ep_doorbell() and by the fact that it is called every time any of those operations completes.

The only known exceptions are hardware bugs (the endpoint never starts at all) and Stream Protocol errors not associated with any TRB, which cause an endpoint reset not followed by restart. Sounds like a bug.

Generally, these retries are only expected to happen when the endpoint fails to start for unknown/no reason, which is a worse problem itself, and fixing the bug eliminates the retries too.

All cases were tested and found to work as expected. SET_DEQ_PENDING was produced by patching uvcvideo to unlink URBs in 100us intervals, which then runs into this case very often. EP_HALTED was produced by restarting 'cat /dev/ttyUSB0' on a serial dongle with broken cable. EP_CLEARING_TT by the same, with the dongle on an external hub.

---
 drivers/usb/host/xhci-ring.c | 13 +++++++++++++
 drivers/usb/host/xhci.c      | 19 +++++++++++++++----
 drivers/usb/host/xhci.h      |  1 +
 3 files changed, 29 insertions(+), 4 deletions(-)
drivers/usb/host/xhci-ring.c +13 -0
index e5b2a3b551e3..2503022a3123 100644
@@ -1052,6 +1052,19 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
 	return 0;
 }
 
+/*
+ * Erase queued TDs from transfer ring(s) and give back those the xHC didn't
+ * stop on. If necessary, queue commands to move the xHC off cancelled TDs it
+ * stopped on. Those will be given back later when the commands complete.
+ *
+ * Call under xhci->lock on a stopped endpoint.
+ */
+void xhci_process_cancelled_tds(struct xhci_virt_ep *ep)
+{
+	xhci_invalidate_cancelled_tds(ep);
+	xhci_giveback_invalidated_tds(ep);
+}
+
 /*
  * Returns the TD the endpoint ring halted on.
  * Only call for non-running rings without streams.
drivers/usb/host/xhci.c +15 -4
index ae14c7ade9bc..e726c5edee03 100644
@@ -1903,10 +1903,21 @@ static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		}
 	}
 
-	/* Queue a stop endpoint command, but only if this is
-	 * the first cancellation to be handled.
-	 */
-	if (!(ep->ep_state & EP_STOP_CMD_PENDING)) {
+	/* These completion handlers will sort out cancelled TDs for us */
+	if (ep->ep_state & (EP_STOP_CMD_PENDING | EP_HALTED | SET_DEQ_PENDING)) {
+		xhci_dbg(xhci, "Not queuing Stop Endpoint on slot %d ep %d in state 0x%x\n",
+				urb->dev->slot_id, ep_index, ep->ep_state);
+		goto done;
+	}
+
+	/* In this case no commands are pending but the endpoint is stopped */
+	if (ep->ep_state & EP_CLEARING_TT) {
+		/* and cancelled TDs can be given back right away */
+		xhci_dbg(xhci, "Invalidating TDs instantly on slot %d ep %d in state 0x%x\n",
+				urb->dev->slot_id, ep_index, ep->ep_state);
+		xhci_process_cancelled_tds(ep);
+	} else {
+		/* Otherwise, queue a new Stop Endpoint command */
 		command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
 		if (!command) {
 			ret = -ENOMEM;
drivers/usb/host/xhci.h +1 -0
index a75b8122538d..1a641f281c00 100644
@@ -1952,6 +1952,7 @@ void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
 void xhci_cleanup_command_queue(struct xhci_hcd *xhci);
 void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring);
 unsigned int count_trbs(u64 addr, u64 len);
+void xhci_process_cancelled_tds(struct xhci_virt_ep *ep);
 
 /* xHCI roothub code */
 void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
Signature · 1 line
2.39.5
author maintainer
#66 lore raw

PATCH 66/81 modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masahiro Yamada <[email protected]>

[ Upstream commit 77dc55a978e69625f9718460012e5ef0172dc4de ]

When building a 64-bit kernel on a 32-bit build host, incorrect input MODULE_ALIAS() entries may be generated.

For example, when compiling a 64-bit kernel with CONFIG_INPUT_MOUSEDEV=m on a 64-bit build machine, you will get the correct output:

  $ grep MODULE_ALIAS drivers/input/mousedev.mod.c
  MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*r*0,*1,*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*r*a*0,*1,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*r*a*0,*1,*18,*1C,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*r*a*0,*1,*m*l*s*f*w*");

However, building the same kernel on a 32-bit machine results in incorrect output:

  $ grep MODULE_ALIAS drivers/input/mousedev.mod.c
  MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*130,*r*0,*1,*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*16A,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*165,*r*a*0,*1,*18,*1C,*20,*21,*38,*3C,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*130,*r*a*0,*1,*20,*21,*m*l*s*f*w*");

A similar issue occurs with CONFIG_INPUT_JOYDEV=m. On a 64-bit build machine, the output is:

  $ grep MODULE_ALIAS drivers/input/joydev.mod.c
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*k*120,*r*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*k*130,*r*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*r*a*m*l*s*f*w*");

However, on a 32-bit machine, the output is incorrect:

  $ grep MODULE_ALIAS drivers/input/joydev.mod.c
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*20,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*22,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*28,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*26,*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
  MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*2E0,*r*a*m*l*s*f*w*");

When building a 64-bit kernel, BITS_PER_LONG is defined as 64. However, on a 32-bit build machine, the constant 1L is a signed 32-bit value. Left-shifting it beyond 32 bits causes wraparound, and shifting by 31 or 63 bits makes it a negative value.

The fix in commit e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix:
modpost-64bit-fix.patch") is incorrect; it only addresses cases where a 64-bit kernel is built on a 64-bit build machine, overlooking cases on a 32-bit build machine.

Using 1ULL ensures a 64-bit width on both 32-bit and 64-bit machines, avoiding the wraparound issue.

Fixes e0e92632715f ("[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch")

Stable-dep-of: bf36b4bf1b9a ("modpost: fix the missed iteration for the max bit in do_input()")

---
 scripts/mod/file2alias.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/mod/file2alias.c +1 -1
index c08beab14a2e..e7d69c9f6341 100644
@@ -742,7 +742,7 @@ static void do_input(char *alias,
 	for (i = min / BITS_PER_LONG; i < max / BITS_PER_LONG + 1; i++)
 		arr[i] = TO_NATIVE(arr[i]);
 	for (i = min; i < max; i++)
-		if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG)))
+		if (arr[i / BITS_PER_LONG] & (1ULL << (i%BITS_PER_LONG)))
 			sprintf(alias + strlen(alias), "%X,*", i);
 }
 
Signature · 1 line
2.39.5
author maintainer
#67 lore raw

PATCH 67/81 modpost: fix the missed iteration for the max bit in do_input()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masahiro Yamada <[email protected]>

[ Upstream commit bf36b4bf1b9a7a0015610e2f038ee84ddb085de2 ]

This loop should iterate over the range from 'min' to 'max' inclusively. The last interation is missed.

Fixes 1d8f430c15b3 ("[PATCH] Input: add modalias support")
---
 scripts/mod/file2alias.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/mod/file2alias.c +1 -1
index e7d69c9f6341..ba09484ef910 100644
@@ -741,7 +741,7 @@ static void do_input(char *alias,
 
 	for (i = min / BITS_PER_LONG; i < max / BITS_PER_LONG + 1; i++)
 		arr[i] = TO_NATIVE(arr[i]);
-	for (i = min; i < max; i++)
+	for (i = min; i <= max; i++)
 		if (arr[i / BITS_PER_LONG] & (1ULL << (i%BITS_PER_LONG)))
 			sprintf(alias + strlen(alias), "%X,*", i);
 }
Signature · 1 line
2.39.5
author maintainer
#68 lore raw

PATCH 68/81 ALSA hda/realtek: Add quirk for Framework F111:000C

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Schaefer <[email protected]>

commit 7b509910b3ad6d7aacead24c8744de10daf8715d upstream.

Similar to commit eb91c456f371
("ALSA: hda/realtek: Add Framework Laptop 13 (Intel Core Ultra) to quirks") and previous quirks for Framework systems with
Realtek codecs.

000C is a new platform that will also have an ALC285 codec and needs the same quirk.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -10255,6 +10255,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0xf111, 0x0006, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0xf111, 0x0009, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0xf111, 0x000c, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 
 #if 0
 	/* Below is a quirk table taken from the old code.
author maintainer
#69 lore raw

PATCH 69/81 ALSA: seq: oss: Fix races at processing SysEx messages

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 0179488ca992d79908b8e26b9213f1554fc5bacc upstream.

OSS sequencer handles the SysEx messages split in 6 bytes packets, and ALSA sequencer OSS layer tries to combine those. It stores the data in the internal buffer and this access is racy as of now, which may lead to the out-of-bounds access.

As a temporary band-aid fix, introduce a mutex for serializing the process of the SysEx message packets.

---
 sound/core/seq/oss/seq_oss_synth.c |    2 ++
 1 file changed, 2 insertions(+)
sound/core/seq/oss/seq_oss_synth.c +2 -0
@@ -66,6 +66,7 @@ static struct seq_oss_synth midi_synth_d
 };
 
 static DEFINE_SPINLOCK(register_lock);
+static DEFINE_MUTEX(sysex_mutex);
 
 /*
  * prototypes
@@ -497,6 +498,7 @@ snd_seq_oss_synth_sysex(struct seq_oss_d
 	if (!info)
 		return -ENXIO;
 
+	guard(mutex)(&sysex_mutex);
 	sysex = info->sysex;
 	if (sysex == NULL) {
 		sysex = kzalloc(sizeof(*sysex), GFP_KERNEL);
author maintainer
#70 lore raw

PATCH 70/81 kcov: mark in_softirq_really() as __always_inline

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

commit cb0ca08b326aa03f87fe94bb91872ce8d2ef1ed8 upstream.

If gcc decides not to inline in_softirq_really(), objtool warns about a function call with UACCESS enabled:

kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc+0x1e: call to in_softirq_really() with UACCESS enabled kernel/kcov.o: warning: objtool: check_kcov_mode+0x11: call to in_softirq_really() with UACCESS enabled

Mark this as __always_inline to avoid the problem.

Fixes 7d4df2dad312 ("kcov: properly check for softirq context")
Cc Aleksandr Nogikh <[email protected]>
Cc Andrey Konovalov <[email protected]>
Cc Dmitry Vyukov <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 kernel/kcov.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/kcov.c +1 -1
@@ -165,7 +165,7 @@ static void kcov_remote_area_put(struct
  * Unlike in_serving_softirq(), this function returns false when called during
  * a hardirq or an NMI that happened in the softirq context.
  */
-static inline bool in_softirq_really(void)
+static __always_inline bool in_softirq_really(void)
 {
 	return in_serving_softirq() && !in_hardirq() && !in_nmi();
 }
author maintainer
#71 lore raw

PATCH 71/81 RDMA/uverbs: Prevent integer overflow issue

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit d0257e089d1bbd35c69b6c97ff73e3690ab149a9 upstream.

In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32 values that come from the user so the multiplication can lead to integer wrapping. Then we pass the result to uverbs_request_next_ptr() which also could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)" multiplication can also overflow on 32bit systems although it's fine on 64bit systems.

This patch does two things. First, I've re-arranged the condition in uverbs_request_next_ptr() so that the use controlled variable "len" is on one side of the comparison by itself without any math. Then I've modified all the callers to use size_mul() for the multiplications.

---
 drivers/infiniband/core/uverbs_cmd.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/infiniband/core/uverbs_cmd.c +9 -7
@@ -161,7 +161,7 @@ static const void __user *uverbs_request
 {
 	const void __user *res = iter->cur;
 
-	if (iter->cur + len > iter->end)
+	if (len > iter->end - iter->cur)
 		return (void __force __user *)ERR_PTR(-ENOSPC);
 	iter->cur += len;
 	return res;
@@ -2009,11 +2009,13 @@ static int ib_uverbs_post_send(struct uv
 	ret = uverbs_request_start(attrs, &iter, &cmd, sizeof(cmd));
 	if (ret)
 		return ret;
-	wqes = uverbs_request_next_ptr(&iter, cmd.wqe_size * cmd.wr_count);
+	wqes = uverbs_request_next_ptr(&iter, size_mul(cmd.wqe_size,
+						       cmd.wr_count));
 	if (IS_ERR(wqes))
 		return PTR_ERR(wqes);
-	sgls = uverbs_request_next_ptr(
-		&iter, cmd.sge_count * sizeof(struct ib_uverbs_sge));
+	sgls = uverbs_request_next_ptr(&iter,
+				       size_mul(cmd.sge_count,
+						sizeof(struct ib_uverbs_sge)));
 	if (IS_ERR(sgls))
 		return PTR_ERR(sgls);
 	ret = uverbs_request_finish(&iter);
@@ -2199,11 +2201,11 @@ ib_uverbs_unmarshall_recv(struct uverbs_
 	if (wqe_size < sizeof(struct ib_uverbs_recv_wr))
 		return ERR_PTR(-EINVAL);
 
-	wqes = uverbs_request_next_ptr(iter, wqe_size * wr_count);
+	wqes = uverbs_request_next_ptr(iter, size_mul(wqe_size, wr_count));
 	if (IS_ERR(wqes))
 		return ERR_CAST(wqes);
-	sgls = uverbs_request_next_ptr(
-		iter, sge_count * sizeof(struct ib_uverbs_sge));
+	sgls = uverbs_request_next_ptr(iter, size_mul(sge_count,
+						      sizeof(struct ib_uverbs_sge)));
 	if (IS_ERR(sgls))
 		return ERR_CAST(sgls);
 	ret = uverbs_request_finish(iter);
author maintainer
#72 lore raw

PATCH 72/81 pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Evgenii Shatokhin <[email protected]>

commit a37eecb705f33726f1fb7cd2a67e514a15dfe693 upstream.

If a device uses MCP23xxx IO expander to receive IRQs, the following bug can happen:

  BUG: sleeping function called from invalid context
    at kernel/locking/mutex.c:283
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ...
  preempt_count: 1, expected: 0
  ...
  Call Trace:
  ...
  __might_resched+0x104/0x10e
  __might_sleep+0x3e/0x62
  mutex_lock+0x20/0x4c
  regmap_lock_mutex+0x10/0x18
  regmap_update_bits_base+0x2c/0x66
  mcp23s08_irq_set_type+0x1ae/0x1d6
  __irq_set_trigger+0x56/0x172
  __setup_irq+0x1e6/0x646
  request_threaded_irq+0xb6/0x160
  ...

We observed the problem while experimenting with a touchscreen driver which used MCP23017 IO expander (I2C).

The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from concurrent accesses, which is the default for regmaps without .fast_io, .disable_locking, etc.

mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter locks the mutex.

However, __setup_irq() locks desc->lock spinlock before calling these functions. As a result, the system tries to lock the mutex whole holding the spinlock.

It seems, the internal regmap locks are not needed in this driver at all. mcp->lock seems to protect the regmap from concurrent accesses already, except, probably, in mcp_pinconf_get/set.

mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes mcp->lock and enables regmap caching, so that the potentially slow I2C accesses are deferred until chip_bus_unlock().

The accesses to the regmap from mcp23s08_probe_one() do not need additional locking.

In all remaining places where the regmap is accessed, except mcp_pinconf_get/set(), the driver already takes mcp->lock.

This patch adds locking in mcp_pinconf_get/set() and disables internal locking in the regmap config. Among other things, it fixes the sleeping in atomic context described above.

---
 drivers/pinctrl/pinctrl-mcp23s08.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/pinctrl/pinctrl-mcp23s08.c +6 -0
@@ -85,6 +85,7 @@ const struct regmap_config mcp23x08_regm
 	.num_reg_defaults = ARRAY_SIZE(mcp23x08_defaults),
 	.cache_type = REGCACHE_FLAT,
 	.max_register = MCP_OLAT,
+	.disable_locking = true, /* mcp->lock protects the regmap */
 };
 EXPORT_SYMBOL_GPL(mcp23x08_regmap);
 
@@ -131,6 +132,7 @@ const struct regmap_config mcp23x17_regm
 	.num_reg_defaults = ARRAY_SIZE(mcp23x17_defaults),
 	.cache_type = REGCACHE_FLAT,
 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.disable_locking = true, /* mcp->lock protects the regmap */
 };
 EXPORT_SYMBOL_GPL(mcp23x17_regmap);
 
@@ -228,7 +230,9 @@ static int mcp_pinconf_get(struct pinctr
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_PULL_UP:
+		mutex_lock(&mcp->lock);
 		ret = mcp_read(mcp, MCP_GPPU, &data);
+		mutex_unlock(&mcp->lock);
 		if (ret < 0)
 			return ret;
 		status = (data & BIT(pin)) ? 1 : 0;
@@ -257,7 +261,9 @@ static int mcp_pinconf_set(struct pinctr
 
 		switch (param) {
 		case PIN_CONFIG_BIAS_PULL_UP:
+			mutex_lock(&mcp->lock);
 			ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg);
+			mutex_unlock(&mcp->lock);
 			break;
 		default:
 			dev_dbg(mcp->dev, "Invalid config param %04x\n", param);
author maintainer
#73 lore raw

PATCH 73/81 sky2: Add device ID 11ab:4373 for Marvell 88E8075

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pascal Hambourg <[email protected]>

commit 03c8d0af2e409e15c16130b185e12b5efba0a6b9 upstream.

A Marvell 88E8075 ethernet controller has this device ID instead of 11ab:4370 and works fine with the sky2 driver.

---
 drivers/net/ethernet/marvell/sky2.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/marvell/sky2.c +1 -0
@@ -130,6 +130,7 @@ static const struct pci_device_id sky2_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4373) }, /* 88E8075 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4382) }, /* 88E8079 */
author maintainer
#74 lore raw

PATCH 74/81 net/sctp: Prevent autoclose integer overflow in sctp_association_init()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nikolay Kuratov <[email protected]>

commit 4e86729d1ff329815a6e8a920cb554a1d4cb5b8d upstream.

While by default max_autoclose equals to INT_MAX / HZ, one may set net.sctp.max_autoclose to UINT_MAX. There is code in sctp_association_init() that can consequently trigger overflow.

Fixes 9f70f46bd4c7 ("sctp: properly latch and use autoclose value from sock to association")
---
 net/sctp/associola.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/sctp/associola.c +2 -1
@@ -137,7 +137,8 @@ static struct sctp_association *sctp_ass
 		= 5 * asoc->rto_max;
 
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay;
-	asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = sp->autoclose * HZ;
+	asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
+		(unsigned long)sp->autoclose * HZ;
 
 	/* Initializes the timers */
 	for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
author maintainer
#75 lore raw

PATCH 75/81 drm: adv7511: Drop dsi single lane support

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Biju Das <[email protected]>

commit 79d67c499c3f886202a40c5cb27e747e4fa4d738 upstream.

As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane.

[1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf
[2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf

---
 drivers/gpu/drm/bridge/adv7511/adv7533.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/adv7511/adv7533.c +1 -1
@@ -179,7 +179,7 @@ int adv7533_parse_dt(struct device_node
 
 	of_property_read_u32(np, "adi,dsi-lanes", &num_lanes);
 
-	if (num_lanes < 1 || num_lanes > 4)
+	if (num_lanes < 2 || num_lanes > 4)
 		return -EINVAL;
 
 	adv->num_dsi_lanes = num_lanes;
author maintainer
#76 lore raw

PATCH 76/81 dt-bindings: display: adi,adv7533: Drop single lane support

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Biju Das <[email protected]>

commit ee8f9ed57a397605434caeef351bafa3ec4dfdd4 upstream.

As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane from bindings.

[1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf
[2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf

---
 Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml +1 -1
@@ -87,7 +87,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   ports:
     description:
author maintainer
#77 lore raw

PATCH 77/81 mm/readahead: fix large folio support in async readahead

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yafang Shao <[email protected]>

commit 158cdce87c8c172787063998ad5dd3e2f658b963 upstream.

When testing large folio support with XFS on our servers, we observed that only a few large folios are mapped when reading large files via mmap. After a thorough analysis, I identified it was caused by the /sys/block/*/queue/read_ahead_kb setting. On our test servers, this parameter is set to 128KB. After I tune it to 2MB, the large folio can work as expected. However, I believe the large folio behavior should not be dependent on the value of read_ahead_kb. It would be more robust if the kernel can automatically adopt to it.

With /sys/block/*/queue/read_ahead_kb set to 128KB and performing a sequential read on a 1GB file using MADV_HUGEPAGE, the differences in /proc/meminfo are as follows:

- before this patch
FileHugePages: 18432 kB
FilePmdMapped: 4096 kB

- after this patch
FileHugePages: 1067008 kB
FilePmdMapped: 1048576 kB

This shows that after applying the patch, the entire 1GB file is mapped to huge pages. The stable list is CCed, as without this patch, large folios don't function optimally in the readahead path.

It's worth noting that if read_ahead_kb is set to a larger value that isn't aligned with huge page sizes (e.g., 4MB + 128KB), it may still fail to map to hugepages.

---
 mm/readahead.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
mm/readahead.c +5 -1
@@ -599,7 +599,11 @@ static void ondemand_readahead(struct re
 			1UL << order);
 	if (index == expected || index == (ra->start + ra->size)) {
 		ra->start += ra->size;
-		ra->size = get_next_ra_size(ra, max_pages);
+		/*
+		 * In the case of MADV_HUGEPAGE, the actual size might exceed
+		 * the readahead window.
+		 */
+		ra->size = max(ra->size, get_next_ra_size(ra, max_pages));
 		ra->async_size = ra->size;
 		goto readit;
 	}
author maintainer
#78 lore raw

PATCH 78/81 mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Seiji Nishikawa <[email protected]>

commit 6aaced5abd32e2a57cd94fd64f824514d0361da8 upstream.

The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false.

#0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c
#3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4

At this point, the pgdat contains the following two zones:

        NODE: 4  ZONE: 0  ADDR: ffff00817fffe540  NAME: "DMA32"
          SIZE: 20480  MIN/LOW/HIGH: 11/28/45
          VM_STAT:
                NR_FREE_PAGES: 359
        NR_ZONE_INACTIVE_ANON: 18813
          NR_ZONE_ACTIVE_ANON: 0
        NR_ZONE_INACTIVE_FILE: 50
          NR_ZONE_ACTIVE_FILE: 0
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

        NODE: 4  ZONE: 1  ADDR: ffff00817fffec00  NAME: "Normal"
          SIZE: 8454144  PRESENT: 98304  MIN/LOW/HIGH: 68/166/264
          VM_STAT:
                NR_FREE_PAGES: 146
        NR_ZONE_INACTIVE_ANON: 94668
          NR_ZONE_ACTIVE_ANON: 3
        NR_ZONE_INACTIVE_FILE: 735
          NR_ZONE_ACTIVE_FILE: 78
          NR_ZONE_UNEVICTABLE: 0
        NR_ZONE_WRITE_PENDING: 0
                     NR_MLOCK: 0
                    NR_BOUNCE: 0
                   NR_ZSPAGES: 0
            NR_FREE_CMA_PAGES: 0

In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero.

Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped.

crash> p nr_swap_pages
nr_swap_pages = $1937 = {
counter = 0
}

As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark.

The problem is that the pgdat->kswapd_failures hasn't been incremented.

        crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
        $1935 = 0x0

This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure.

The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false.

The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped.

The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim().

This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior.

---
 mm/vmscan.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
mm/vmscan.c +8 -1
@@ -588,7 +588,14 @@ unsigned long zone_reclaimable_pages(str
 	if (can_reclaim_anon_pages(NULL, zone_to_nid(zone), NULL))
 		nr += zone_page_state_snapshot(zone, NR_ZONE_INACTIVE_ANON) +
 			zone_page_state_snapshot(zone, NR_ZONE_ACTIVE_ANON);
-
+	/*
+	 * If there are no reclaimable file-backed or anonymous pages,
+	 * ensure zones with sufficient free pages are not skipped.
+	 * This prevents zones like DMA32 from being ignored in reclaim
+	 * scenarios where they can still help alleviate memory pressure.
+	 */
+	if (nr == 0)
+		nr = zone_page_state_snapshot(zone, NR_FREE_PAGES);
 	return nr;
 }
 
author maintainer
#79 lore raw

PATCH 79/81 mptcp: fix TCP options overflow.

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <[email protected]>

commit cbb26f7d8451fe56ccac802c6db48d16240feebd upstream.

Syzbot reported the following splat:

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline]
RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552
Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83
RSP: 0000:ffffc90003916c90 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac
R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007
R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 skb_page_unref include/linux/skbuff_ref.h:43 [inline]
 __skb_frag_unref include/linux/skbuff_ref.h:56 [inline]
 skb_release_data+0x483/0x8a0 net/core/skbuff.c:1119
 skb_release_all net/core/skbuff.c:1190 [inline]
 __kfree_skb+0x55/0x70 net/core/skbuff.c:1204
 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3436 [inline]
 tcp_ack+0x2442/0x6bc0 net/ipv4/tcp_input.c:4032
 tcp_rcv_state_process+0x8eb/0x44e0 net/ipv4/tcp_input.c:6805
 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1939
 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2351
 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
 __netif_receive_skb_one_core net/core/dev.c:5672 [inline]
 __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5785
 process_backlog+0x662/0x15b0 net/core/dev.c:6117
 __napi_poll+0xcb/0x490 net/core/dev.c:6883
 napi_poll net/core/dev.c:6952 [inline]
 net_rx_action+0x89b/0x1240 net/core/dev.c:7074
 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
 __do_softirq kernel/softirq.c:595 [inline]
 invoke_softirq kernel/softirq.c:435 [inline]
 __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662
 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
 sysvec_apic_timer_interrupt+0x57/0xc0 arch/x86/kernel/apic/apic.c:1049
 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
RIP: 0033:0x7f34f4519ad5
Code: 85 d2 74 0d 0f 10 02 48 8d 54 24 20 0f 11 44 24 20 64 8b 04 25 18 00 00 00 85 c0 75 27 41 b8 08 00 00 00 b8 0f 01 00 00 0f 05 <48> 3d 00 f0 ff ff 76 75 48 8b 15 24 73 0d 00 f7 d8 64 89 02 48 83
RSP: 002b:00007ffec5b32ce0 EFLAGS: 00000246
RAX: 0000000000000001 RBX: 00000000000668a0 RCX: 00007f34f4519ad5
RDX: 00007ffec5b32d00 RSI: 0000000000000004 RDI: 0000564f4bc6cae0
RBP: 0000564f4bc6b5a0 R08: 0000000000000008 R09: 0000000000000000
R10: 00007ffec5b32de8 R11: 0000000000000246 R12: 0000564f48ea8aa4
R13: 0000000000000001 R14: 0000564f48ea93e8 R15: 00007ffec5b32d68
 </TASK>

Eric noted a probable shinfo->nr_frags corruption, which indeed occurs.

The root cause is a buggy MPTCP option len computation in some
circumstances: the ADD_ADDR option should be mutually exclusive with DSS since the blamed commit.

Still, mptcp_established_options_add_addr() tries to set the relevant info in mptcp_out_options, if the remaining space is large enough even when DSS is present.

Since the ADD_ADDR infos and the DSS share the same union fields, adding first corrupts the latter. In the worst-case scenario, such corruption increases the DSS binary layout, exceeding the computed length and possibly overwriting the skb shared info.

Address the issue by enforcing mutual exclusion in mptcp_established_options_add_addr(), too.

---
 net/mptcp/options.c |    7 +++++++
 1 file changed, 7 insertions(+)
net/mptcp/options.c +7 -0
@@ -665,8 +665,15 @@ static bool mptcp_established_options_ad
 		    &echo, &drop_other_suboptions))
 		return false;
 
+	/*
+	 * Later on, mptcp_write_options() will enforce mutually exclusion with
+	 * DSS, bail out if such option is set and we can't drop it.
+	 */
 	if (drop_other_suboptions)
 		remaining += opt_size;
+	else if (opts->suboptions & OPTION_MPTCP_DSS)
+		return false;
+
 	len = mptcp_add_addr_len(opts->addr.family, echo, !!opts->addr.port);
 	if (remaining < len)
 		return false;
author maintainer
#80 lore raw

PATCH 80/81 mptcp: fix recvbuffer adjust on sleeping rcvmsg

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <[email protected]>

commit 449e6912a2522af672e99992e1201a454910864e upstream.

If the recvmsg() blocks after receiving some data - i.e. due to SO_RCVLOWAT - the MPTCP code will attempt multiple times to adjust the receive buffer size, wrongly accounting every time the cumulative of received data - instead of accounting only for the delta.

Address the issue moving mptcp_rcv_space_adjust just after the data reception and passing it only the just received bytes.

This also removes an unneeded difference between the TCP and MPTCP RX code path implementation.

---
 net/mptcp/protocol.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
net/mptcp/protocol.c +3 -3
@@ -1917,6 +1917,8 @@ do_error:
 	goto out;
 }
 
+static void mptcp_rcv_space_adjust(struct mptcp_sock *msk, int copied);
+
 static int __mptcp_recvmsg_mskq(struct mptcp_sock *msk,
 				struct msghdr *msg,
 				size_t len, int flags,
@@ -1968,6 +1970,7 @@ static int __mptcp_recvmsg_mskq(struct m
 			break;
 	}
 
+	mptcp_rcv_space_adjust(msk, copied);
 	return copied;
 }
 
@@ -2246,7 +2249,6 @@ static int mptcp_recvmsg(struct sock *sk
 		}
 
 		pr_debug("block timeout %ld\n", timeo);
-		mptcp_rcv_space_adjust(msk, copied);
 		err = sk_wait_data(sk, &timeo, NULL);
 		if (err < 0) {
 			err = copied ? : err;
@@ -2254,8 +2256,6 @@ static int mptcp_recvmsg(struct sock *sk
 		}
 	}
 
-	mptcp_rcv_space_adjust(msk, copied);
-
 out_err:
 	if (cmsg_flags && copied >= 0) {
 		if (cmsg_flags & MPTCP_CMSG_TS)
author maintainer
#81 lore raw

PATCH 81/81 mptcp: dont always assume copied data in mptcp_cleanup_rbuf()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <[email protected]>

commit 551844f26da2a9f76c0a698baaffa631d1178645 upstream.

Under some corner cases the MPTCP protocol can end-up invoking mptcp_cleanup_rbuf() when no data has been copied, but such helper assumes the opposite condition.

Explicitly drop such assumption and performs the costly call only when strictly needed - before releasing the msk socket lock.

---
 net/mptcp/protocol.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
net/mptcp/protocol.c +9 -9
@@ -538,13 +538,13 @@ static void mptcp_send_ack(struct mptcp_
 		mptcp_subflow_send_ack(mptcp_subflow_tcp_sock(subflow));
 }
 
-static void mptcp_subflow_cleanup_rbuf(struct sock *ssk)
+static void mptcp_subflow_cleanup_rbuf(struct sock *ssk, int copied)
 {
 	bool slow;
 
 	slow = lock_sock_fast(ssk);
 	if (tcp_can_send_ack(ssk))
-		tcp_cleanup_rbuf(ssk, 1);
+		tcp_cleanup_rbuf(ssk, copied);
 	unlock_sock_fast(ssk, slow);
 }
 
@@ -561,7 +561,7 @@ static bool mptcp_subflow_could_cleanup(
 			      (ICSK_ACK_PUSHED2 | ICSK_ACK_PUSHED)));
 }
 
-static void mptcp_cleanup_rbuf(struct mptcp_sock *msk)
+static void mptcp_cleanup_rbuf(struct mptcp_sock *msk, int copied)
 {
 	int old_space = READ_ONCE(msk->old_wspace);
 	struct mptcp_subflow_context *subflow;
@@ -569,14 +569,14 @@ static void mptcp_cleanup_rbuf(struct mp
 	int space =  __mptcp_space(sk);
 	bool cleanup, rx_empty;
 
-	cleanup = (space > 0) && (space >= (old_space << 1));
-	rx_empty = !__mptcp_rmem(sk);
+	cleanup = (space > 0) && (space >= (old_space << 1)) && copied;
+	rx_empty = !__mptcp_rmem(sk) && copied;
 
 	mptcp_for_each_subflow(msk, subflow) {
 		struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
 
 		if (cleanup || mptcp_subflow_could_cleanup(ssk, rx_empty))
-			mptcp_subflow_cleanup_rbuf(ssk);
+			mptcp_subflow_cleanup_rbuf(ssk, copied);
 	}
 }
 
@@ -2195,9 +2195,6 @@ static int mptcp_recvmsg(struct sock *sk
 
 		copied += bytes_read;
 
-		/* be sure to advertise window change */
-		mptcp_cleanup_rbuf(msk);
-
 		if (skb_queue_empty(&msk->receive_queue) && __mptcp_move_skbs(msk))
 			continue;
 
@@ -2249,6 +2246,7 @@ static int mptcp_recvmsg(struct sock *sk
 		}
 
 		pr_debug("block timeout %ld\n", timeo);
+		mptcp_cleanup_rbuf(msk, copied);
 		err = sk_wait_data(sk, &timeo, NULL);
 		if (err < 0) {
 			err = copied ? : err;
@@ -2256,6 +2254,8 @@ static int mptcp_recvmsg(struct sock *sk
 		}
 	}
 
+	mptcp_cleanup_rbuf(msk, copied);
+
 out_err:
 	if (cmsg_flags && copied >= 0) {
 		if (cmsg_flags & MPTCP_CMSG_TS)
Tested-by on the v1 series
#82 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

CIP testing did not find any problems here: (obsvx2 target is down)

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6.1.y

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Tested-by on the v1 series
#83 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.124-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Signature · 1 line
Florian
Tested-by on the v1 series
#84 lore raw
In reply to Greg Kroah-Hartman

Am 06.01.2025 um 16:15 schrieb Greg Kroah-Hartman:

Quoted 4 lines

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.

Beste Grüße,
Peter Schneider

Signature · 8 lines
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]
maintainer Tested-by on the v1 series
#85 lore raw
In reply to Greg Kroah-Hartman

Hello,

Quoted 7 lines · On Mon, 6 Jan 2025 16:15:32 +0100 Greg Kroah-Hartman…

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].

[1] https://github.com/damonitor/damon-tests/tree/next/corr
[2] 88f2306b7d74 ("Linux 6.1.124-rc1")

Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: sysfs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh # SKIP
ok 12 selftests: damon-tests: build_m68k.sh # SKIP
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m

Tested-by on the v1 series
#86 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.124-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by on the v1 series
#87 lore raw
In reply to Greg Kroah-Hartman
Quoted 4 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Tested-by Linux Kernel Functional Testing on the v1 series
#88 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.124-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 6.1.124-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 88f2306b7d7493dc9a6aaa851f2983532fb5666f
* git describe: v6.1.123-82-g88f2306b7d74
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.123-82-g88f2306b7d74

## Test Regressions (compared to v6.1.122-61-g519f5e9fdade)

## Metric Regressions (compared to v6.1.122-61-g519f5e9fdade)

## Test Fixes (compared to v6.1.122-61-g519f5e9fdade)

## Metric Fixes (compared to v6.1.122-61-g519f5e9fdade)

## Test result summary
total: 114042, pass: 89304, fail: 4717, skip: 19888, xfail: 133

## Build Summary
* arc: 6 total, 5 passed, 1 failed
* arm: 138 total, 138 passed, 0 failed
* arm64: 44 total, 42 passed, 2 failed
* i386: 31 total, 27 passed, 4 failed
* mips: 30 total, 25 passed, 5 failed
* parisc: 5 total, 5 passed, 0 failed
* powerpc: 36 total, 33 passed, 3 failed
* riscv: 14 total, 13 passed, 1 failed
* s390: 18 total, 17 passed, 1 failed
* sh: 12 total, 10 passed, 2 failed
* sparc: 9 total, 8 passed, 1 failed
* x86_64: 36 total, 36 passed, 0 failed

## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

maintainer Tested-by on the v1 series
#89 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.124-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v6.1:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    115 tests:	115 pass, 0 fail

Linux version: 6.1.124-rc1-g88f2306b7d74
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by on the v1 series
#91 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.124-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested-by kernelci.org bot on the v1 series
#92 lore raw
In reply to Greg Kroah-Hartman
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.124 release. There are 81 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 08 Jan 2025 15:11:04 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.124-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

Quoted 5 lines

thanks,

greg k-h

-------------

OVERVIEW

Builds: 39 passed, 0 failed

Boot tests: 507 passed, 0 failed

CI systems: broonie, maestro

REVISION

    Commit
        name: v6.1.123-82-g88f2306b7d74
        hash: 88f2306b7d7493dc9a6aaa851f2983532fb5666f
    Checked out from
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y

BUILDS

No build failure found

BOOT TESTS

No boot failure found

See complete and up-to-date report at:

    https://kcidb.kernelci.org/d/revision/revision?orgId=1&var-git_commit_hash=88f2306b7d7493dc9a6aaa851f2983532fb5666f&var-patchset_hash=

Thanks,
KernelCI team