Skip to contentSkip to conversation

configs/orangepi_5_plus: new board

PATCH In review Sergey Matyukevich 2 participants 4 messages Jan 6, 2025 – Jan 26, 2025

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs/orangepi_5_plus: new board

This patch adds basic support for the new OrangePi 5 Plus board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html

Brief summary of the board features:
- RK3588 Rockchip SoC
- Quad-Core ARM Cortex-A76 Processor 2.4GHz
- Quad-Core ARM Cortex-A55 Processor 1.8GHz
- Mali G610 GPU
- NPU 6 Tops INT4/INT8/INT16/FP16
- LPDDR4x: 8GB/16GB/32GB
- 2x USB 2.0
- 2x USB 3.0
- 2x HDMI out
- PCIe M.2 M-key socket (e.g. for NVMe)
- PCIe M.2 E-key socket (e.g. for WiFi/BT)
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM / CAN / I2S)
- and much much more ...

BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2024.10
- mainline Linux kernel v6.12.x

Unlike all the other boards from board/orangepi directory, this board is not based on an Allwinner SoC. It is based on Rockchip RK3588 SoC. So custom scripts and configs are used instead of common options from the board/orangepi/common directory. Suggested scripts and configs are based on those of Radxa Rock5B board.

---
 DEVELOPERS                                    |  2 +
 board/orangepi/orangepi-5-plus/extlinux.conf  |  4 ++
 board/orangepi/orangepi-5-plus/genimage.cfg   | 23 ++++++++
 board/orangepi/orangepi-5-plus/linux.fragment |  9 +++
 .../patches/linux-headers/linux-headers.hash  |  1 +
 .../orangepi-5-plus/patches/linux/linux.hash  |  2 +
 .../orangepi-5-plus/patches/uboot/uboot.hash  |  2 +
 board/orangepi/orangepi-5-plus/post-build.sh  |  5 ++
 board/orangepi/orangepi-5-plus/readme.txt     | 46 ++++++++++++++++
 .../orangepi/orangepi-5-plus/u-boot.fragment  |  5 ++
 configs/orangepi_5_plus_defconfig             | 55 +++++++++++++++++++
 11 files changed, 154 insertions(+)
 create mode 100644 board/orangepi/orangepi-5-plus/extlinux.conf
 create mode 100644 board/orangepi/orangepi-5-plus/genimage.cfg
 create mode 100644 board/orangepi/orangepi-5-plus/linux.fragment
 create mode 120000 board/orangepi/orangepi-5-plus/patches/linux-headers/linux-headers.hash
 create mode 100644 board/orangepi/orangepi-5-plus/patches/linux/linux.hash
 create mode 100644 board/orangepi/orangepi-5-plus/patches/uboot/uboot.hash
 create mode 100755 board/orangepi/orangepi-5-plus/post-build.sh
 create mode 100644 board/orangepi/orangepi-5-plus/readme.txt
 create mode 100644 board/orangepi/orangepi-5-plus/u-boot.fragment
 create mode 100644 configs/orangepi_5_plus_defconfig
DEVELOPERS +2 -0
index 16b72eee08..cc3604f508 100644
@@ -2944,12 +2944,14 @@ F:	package/sdbus-cpp/
 N:	Sergey Matyukevich <[email protected]>
 F:	boot/arm-trusted-firmware/
 F:	board/linksprite/pcduino
+F:	board/orangepi/orangepi-5-plus
 F:	board/orangepi/orangepi-zero
 F:	board/orangepi/orangepi-one
 F:	board/orangepi/orangepi-pc-plus/
 F:	board/orangepi/orangepi-zero-plus2/
 F:	board/orangepi/orangepi-zero2w/
 F:	configs/linksprite_pcduino_defconfig
+F:	configs/orangepi_5_plus_defconfig
 F:	configs/orangepi_one_defconfig
 F:	configs/orangepi_pc_plus_defconfig
 F:	configs/orangepi_zero_defconfig
board/orangepi/orangepi-5-plus/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..c6421c3bf4
@@ -0,0 +1,4 @@
+label OrangePi 5 Plus Linux
+  kernel /boot/Image
+  devicetreedir /boot
+  append root=PARTLABEL=rootfs earlycon rootwait panic=10
board/orangepi/orangepi-5-plus/genimage.cfg new file +23 -0
new file mode 100644
index 0000000000..1f3ff3ec25
@@ -0,0 +1,23 @@
+image sdcard.img {
+	hdimage {
+		partition-table-type = "gpt"
+	}
+
+	partition uboot {
+		in-partition-table = "false"
+		image = "u-boot-rockchip.bin"
+		offset = 32K
+	}
+
+	partition uboot-env {
+		partition-type-uuid = 3de21764-95bd-54bd-a5c3-4abe786f38a8
+		offset = 16M
+		size = 64K
+	}
+
+	partition rootfs {
+		partition-type-uuid = L
+		image = "rootfs.ext2"
+		bootable = true
+	}
+}
board/orangepi/orangepi-5-plus/linux.fragment new file +9 -0
new file mode 100644
index 0000000000..d5a4a6f24f
@@ -0,0 +1,9 @@
+# net
+CONFIG_R8169=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
+
+# usbcam
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_UVC_COMMON=y
board/orangepi/orangepi-5-plus/patches/linux-headers/linux-headers.hash new file +1 -0
new file mode 120000
index 0000000000..5808d92afe
@@ -0,0 +1 @@
+../linux/linux.hash
\ No newline at end of file
board/orangepi/orangepi-5-plus/patches/linux/linux.hash new file +2 -0
new file mode 100644
index 0000000000..d00eed9a49
@@ -0,0 +1,2 @@
+# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
+sha256  6f35f821433d8421be7167990747c7c4a0c451958fb96883446301af13d71152  linux-6.12.4.tar.xz
board/orangepi/orangepi-5-plus/patches/uboot/uboot.hash new file +2 -0
new file mode 100644
index 0000000000..904fa56c02
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
board/orangepi/orangepi-5-plus/post-build.sh new file +5 -0
new file mode 100755
index 0000000000..d84a5da0b0
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname "$0")"
+
+install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf
board/orangepi/orangepi-5-plus/readme.txt new file +46 -0

46 lines not on this page · raw message

board/orangepi/orangepi-5-plus/u-boot.fragment new file +5 -0
new file mode 100644
index 0000000000..ceba8d609a
@@ -0,0 +1,5 @@
+CONFIG_ENV_SIZE=0x10000
+CONFIG_PARTITION_TYPE_GUID=y
+# CONFIG_ENV_IS_NOWHERE is not set
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_MMC_ENV_DEV=1
configs/orangepi_5_plus_defconfig new file +55 -0

55 lines not on this page · raw message

Signature · 6 lines
2.47.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw
Quoted 25 lines · Sergey Matyukevich

This patch adds basic support for the new OrangePi 5 Plus board:
-
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html

Brief summary of the board features:
- RK3588 Rockchip SoC
- Quad-Core ARM Cortex-A76 Processor 2.4GHz
- Quad-Core ARM Cortex-A55 Processor 1.8GHz
- Mali G610 GPU
- NPU 6 Tops INT4/INT8/INT16/FP16
- LPDDR4x: 8GB/16GB/32GB
- 2x USB 2.0
- 2x USB 3.0
- 2x HDMI out
- PCIe M.2 M-key socket (e.g. for NVMe)
- PCIe M.2 E-key socket (e.g. for WiFi/BT)
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM / CAN / I2S)
- and much much more ...

BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2024.10
- mainline Linux kernel v6.12.x

Quoted 7 lines

Unlike all the other boards from board/orangepi directory, this board is not based on an Allwinner SoC. It is based on Rockchip RK3588 SoC. So custom scripts and configs are used instead of common options from the board/orangepi/common directory. Suggested scripts and configs are based on those of Radxa Rock5B board.

Applied to master, thanks.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#2 lore raw
Quoted 30 lines · Julien Olivain
Quoted 29 lines · Sergey Matyukevich

This patch adds basic support for the new OrangePi 5 Plus board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html

Brief summary of the board features:
- RK3588 Rockchip SoC
- Quad-Core ARM Cortex-A76 Processor 2.4GHz
- Quad-Core ARM Cortex-A55 Processor 1.8GHz
- Mali G610 GPU
- NPU 6 Tops INT4/INT8/INT16/FP16
- LPDDR4x: 8GB/16GB/32GB
- 2x USB 2.0
- 2x USB 3.0
- 2x HDMI out
- PCIe M.2 M-key socket (e.g. for NVMe)
- PCIe M.2 E-key socket (e.g. for WiFi/BT)
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM / CAN / I2S)
- and much much more ...

BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2024.10
- mainline Linux kernel v6.12.x

Unlike all the other boards from board/orangepi directory, this board is not based on an Allwinner SoC. It is based on Rockchip RK3588 SoC. So custom scripts and configs are used instead of common options from the board/orangepi/common directory. Suggested scripts and configs are based on those of Radxa Rock5B board.

Quoted 3 lines
Quoted 1 line

Applied to master, thanks.

Thanks !

Unfortunately, your minor cleanup 'switch to human readable genimage.cfg partition type uuid' breaks the build:

: >>> Executing post-image script support/scripts/genimage.sh
: ...
: ERROR: hdimage(sdcard.img): part uboot-env has invalid type shortcut: u-boot-env

Latest available genimage release does not yet provide the GUID shortcut for 'u-boot-env'. So I sent a fixup to keep using the GUID value directly:

- https://lore.kernel.org/buildroot/[email protected]/T/#u

Regards,
Sergey
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#3 lore raw

Hi Sergey,

Quoted 44 lines · Sergey Matyukevich
Quoted 30 lines · Julien Olivain
Quoted 29 lines · Sergey Matyukevich

This patch adds basic support for the new OrangePi 5 Plus board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html

Brief summary of the board features:
- RK3588 Rockchip SoC
- Quad-Core ARM Cortex-A76 Processor 2.4GHz
- Quad-Core ARM Cortex-A55 Processor 1.8GHz
- Mali G610 GPU
- NPU 6 Tops INT4/INT8/INT16/FP16
- LPDDR4x: 8GB/16GB/32GB
- 2x USB 2.0
- 2x USB 3.0
- 2x HDMI out
- PCIe M.2 M-key socket (e.g. for NVMe)
- PCIe M.2 E-key socket (e.g. for WiFi/BT)
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM / CAN / I2S)
- and much much more ...

BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2024.10
- mainline Linux kernel v6.12.x

Unlike all the other boards from board/orangepi directory, this board is not based on an Allwinner SoC. It is based on Rockchip RK3588 SoC. So custom scripts and configs are used instead of common options from the board/orangepi/common directory. Suggested scripts and configs are based on those of Radxa Rock5B board.

Quoted 3 lines
Quoted 1 line

Applied to master, thanks.

Thanks !

Unfortunately, your minor cleanup 'switch to human readable genimage.cfg partition type uuid' breaks the build:

: >>> Executing post-image script support/scripts/genimage.sh
: ...
: ERROR: hdimage(sdcard.img): part uboot-env has invalid type shortcut: u-boot-env

Quoted 5 lines

Latest available genimage release does not yet provide the GUID shortcut for 'u-boot-env'. So I sent a fixup to keep using the GUID value directly:

-
https://lore.kernel.org/buildroot/[email protected]/T/#u

Sorry for my non-improvement ;) and thanks for the fix!

Quoted 2 lines

Regards,
Sergey

Best regards,

Julien.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot