Skip to contentSkip to conversation

Add support for NetCube Systems Kumquat

PATCH New Lukas Schmid 1 participant 2 messages Jan 6, 2025 Arm/Allwinner sunXi SoC support

lore
Share & tools
lore
#0 lore raw

v2 cover Add support for NetCube Systems Kumquat

Changes in v2:
Rename some files to match those of other boards Add a post-build script to generate a partition uuid
for the rootfs partition and add it to the extlinux.conf
Switch to linux 6.8.7 which has been tested thoroughly on
the board
Fix typo in DEVELOPERS file

---
Lukas Schmid (1):
configs/netcube_kumquat_defconfig: new defconfig

 DEVELOPERS                                    |    4 +
 board/netcube/kumquat/extlinux.conf           |    4 +
 board/netcube/kumquat/genimage.cfg            |   40 +
 .../linux-dts/sun8i-v3s-netcube-kumquat.dts   |  279 ++++
 board/netcube/kumquat/linux.config            |  155 ++
 ...init-Try-to-load-macaddr-from-eeprom.patch |  114 ++
 board/netcube/kumquat/post-build.sh           |    7 +
 board/netcube/kumquat/readme.txt              |   71 +
 .../kumquat/rootfs_overlay/etc/fw_env.config  |   11 +
 .../rootfs_overlay/etc/init.d/S35esphosted    |   71 +
 .../uboot-dts/sun8i-v3s-netcube-kumquat.dts   |  279 ++++
 board/netcube/kumquat/uboot.config            |   56 +
 configs/netcube_kumquat_defconfig             |   41 +
 ...cube_kumquat_defconfig-new-defconfig.patch | 1268 +++++++++++++++++
 14 files changed, 2400 insertions(+)
 create mode 100644 board/netcube/kumquat/extlinux.conf
 create mode 100644 board/netcube/kumquat/genimage.cfg
 create mode 100644 board/netcube/kumquat/linux-dts/sun8i-v3s-netcube-kumquat.dts
 create mode 100644 board/netcube/kumquat/linux.config
 create mode 100644 board/netcube/kumquat/patches/uboot/2024.10/0001-eth-sunxi-board-init-Try-to-load-macaddr-from-eeprom.patch
 create mode 100755 board/netcube/kumquat/post-build.sh
 create mode 100644 board/netcube/kumquat/readme.txt
 create mode 100644 board/netcube/kumquat/rootfs_overlay/etc/fw_env.config
 create mode 100755 board/netcube/kumquat/rootfs_overlay/etc/init.d/S35esphosted
 create mode 100644 board/netcube/kumquat/uboot-dts/sun8i-v3s-netcube-kumquat.dts
 create mode 100644 board/netcube/kumquat/uboot.config
 create mode 100644 configs/netcube_kumquat_defconfig
 create mode 100644 outgoing/0001-configs-netcube_kumquat_defconfig-new-defconfig.patch
Signature · 7 lines
2.47.1


_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH v2 1/1 configs/netcube_kumquat_defconfig: new defconfig

Add the NetCube Systems Kumquat.
The Kumquat is a board based on the Allwinner V3s SoC, intended for IoT, IIoT and Smart Home type applications.

Features include:

- 64MB DDR2 included in SoC
- 10/100 Mbps Ethernet
- USB-C DRD
- Audio Codec
- Isolated CAN-FD
- ESP32 over SDIO
- 8MB SPI-NOR Flash for bootloader
- I2C EEPROM for MAC addresses
- SDIO Connector for eMMC or SD-Card
- 8x 12/24V IOs, 4x normally open relays
- DS3232 RTC
- QWIIC connectors for external I2C devices

---
 DEVELOPERS                                    |    4 +
 board/netcube/kumquat/extlinux.conf           |    4 +
 board/netcube/kumquat/genimage.cfg            |   40 +
 .../linux-dts/sun8i-v3s-netcube-kumquat.dts   |  279 ++++
 board/netcube/kumquat/linux.config            |  155 ++
 ...init-Try-to-load-macaddr-from-eeprom.patch |  114 ++
 board/netcube/kumquat/post-build.sh           |    7 +
 board/netcube/kumquat/readme.txt              |   71 +
 .../kumquat/rootfs_overlay/etc/fw_env.config  |   11 +
 .../rootfs_overlay/etc/init.d/S35esphosted    |   71 +
 .../uboot-dts/sun8i-v3s-netcube-kumquat.dts   |  279 ++++
 board/netcube/kumquat/uboot.config            |   56 +
 configs/netcube_kumquat_defconfig             |   41 +
 ...cube_kumquat_defconfig-new-defconfig.patch | 1268 +++++++++++++++++
 14 files changed, 2400 insertions(+)
 create mode 100644 board/netcube/kumquat/extlinux.conf
 create mode 100644 board/netcube/kumquat/genimage.cfg
 create mode 100644 board/netcube/kumquat/linux-dts/sun8i-v3s-netcube-kumquat.dts
 create mode 100644 board/netcube/kumquat/linux.config
 create mode 100644 board/netcube/kumquat/patches/uboot/2024.10/0001-eth-sunxi-board-init-Try-to-load-macaddr-from-eeprom.patch
 create mode 100755 board/netcube/kumquat/post-build.sh
 create mode 100644 board/netcube/kumquat/readme.txt
 create mode 100644 board/netcube/kumquat/rootfs_overlay/etc/fw_env.config
 create mode 100755 board/netcube/kumquat/rootfs_overlay/etc/init.d/S35esphosted
 create mode 100644 board/netcube/kumquat/uboot-dts/sun8i-v3s-netcube-kumquat.dts
 create mode 100644 board/netcube/kumquat/uboot.config
 create mode 100644 configs/netcube_kumquat_defconfig
 create mode 100644 outgoing/0001-configs-netcube_kumquat_defconfig-new-defconfig.patch
DEVELOPERS +4 -0
index 16b72eee08..03f909d372 100644
@@ -2143,6 +2143,10 @@ F:	support/legal-info/
 N:	Lucas De Marchi <[email protected]>
 F:	package/fswebcam/
 
+N:  Lukas Schmid <[email protected]>
+F:  board/netcube/
+F:  configs/netcube_kumquat_defconfig
+
 N:	Lubomir Rintel <[email protected]>
 F:	board/olpc/
 F:	configs/olpc_xo1_defconfig
board/netcube/kumquat/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..21adf73c19
@@ -0,0 +1,4 @@
+LABEL default
+  kernel /boot/zImage
+  fdt /boot/sun8i-v3s-netcube-kumquat.dtb
+  append root=PARTUUID=%PARTUUID% rootwait console=${console} rootfstype=ext4 panic=3 ${mtdparts}
board/netcube/kumquat/genimage.cfg new file +40 -0
new file mode 100644
index 0000000000..a6b846134e
@@ -0,0 +1,40 @@
+flash "w25q64" {
+	pebsize = 65536
+	lebsize = 65408
+	numpebs = 128
+	minimum-io-unit-size = 1
+	sub-page-size = 1
+	vid-header-offset = 64
+}
+
+image nor-flash.img {
+	flash {}
+	flashtype = "w25q64"
+
+	partition u-boot {
+		image = "u-boot-sunxi-with-spl.bin"
+		size = 1M
+	}
+
+	partition u-boot-env1 {
+		image = "/dev/zero"
+		size = 512K
+	}
+
+	partition u-boot-env2 {
+		image = "/dev/zero"
+		size = 512K
+	}
+}
+
+image sdcard.img {
+	hdimage {
+		partition-table-type = "gpt"
+	}
+
+	partition rootfs {
+		bootable = "true"
+		image = "rootfs.ext4"
+		partition-uuid = %PARTUUID%
+	}
+}
board/netcube/kumquat/linux-dts/sun8i-v3s-netcube-kumquat.dts new file +279 -0

279 lines not on this page · raw message

board/netcube/kumquat/linux.config new file +155 -0

155 lines not on this page · raw message

board/netcube/kumquat/patches/uboot/2024.10/0001-eth-sunxi-board-init-Try-to-load-macaddr-from-eeprom.patch new file +114 -0

114 lines not on this page · raw message

board/netcube/kumquat/post-build.sh new file +7 -0
new file mode 100755
index 0000000000..5e424cbfb6
@@ -0,0 +1,7 @@
+#!/bin/sh
+BOARD_DIR="$(dirname "$0")"
+PARTUUID="$("$HOST_DIR/bin/uuidgen")"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
board/netcube/kumquat/readme.txt new file +71 -0

71 lines not on this page · raw message

board/netcube/kumquat/rootfs_overlay/etc/fw_env.config new file +11 -0
new file mode 100644
index 0000000000..6f31316fe0
@@ -0,0 +1,11 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is omitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+# Device offset must be prefixed with 0x to be parsed as a hexadecimal value.
+
+# MTD device name       Device offset   Env. size       Flash sector size       Number of sectors
+/dev/mtd1		0x0000		0x40000
+/dev/mtd2		0x0000		0x40000
board/netcube/kumquat/rootfs_overlay/etc/init.d/S35esphosted new file +71 -0

71 lines not on this page · raw message

board/netcube/kumquat/uboot-dts/sun8i-v3s-netcube-kumquat.dts new file +279 -0

279 lines not on this page · raw message

board/netcube/kumquat/uboot.config new file +56 -0

56 lines not on this page · raw message

configs/netcube_kumquat_defconfig new file +41 -0

41 lines not on this page · raw message

outgoing/0001-configs-netcube_kumquat_defconfig-new-defconfig.patch new file +1268 -0

1,268 lines not on this page · raw message

Signature · 7 lines
2.47.1


_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot