Skip to contentSkip to conversation

usb: ehci-mx6: Add i.MX95 support

PATCH In review Marek Vasut 2 participants 4 messages Jan 7, 2025 – Jan 8, 2025 USB

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 usb: ehci-mx6: Add i.MX95 support

i.MX95 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver.

---
Cc: Alice Guo <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Mathieu Othacehe <[email protected]>
Cc: Mattijs Korpershoek <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: [email protected]

---
 drivers/usb/host/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/usb/host/Kconfig +5 -5
index 24786a2bc91..a656265890e 100644
@@ -217,14 +217,14 @@ config USB_EHCI_MX6
 	  Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 
 config USB_EHCI_MX7
-	bool "Support for i.MX7 on-chip EHCI USB controller"
-	depends on ARCH_MX7 || IMX8M || IMX93
+	bool "Support for i.MX7/i.MX8M/i.MX9 on-chip EHCI USB controller"
+	depends on ARCH_MX7 || IMX8M || IMX93 || IMX95
 	select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7
-	select PHY if IMX8M || IMX93
-	select NOP_PHY if IMX8M || IMX93
+	select PHY if IMX8M || IMX93 || IMX95
+	select NOP_PHY if IMX8M || IMX93 || IMX95
 	default y
 	---help---
-	  Enables support for the on-chip EHCI controller on i.MX7 SoCs.
+	  Enables support for the on-chip EHCI controller on i.MX7/i.MX8M/i.MX9 SoCs.
 
 config USB_EHCI_MXS
 	bool "Support for i.MX23/i.MX28 EHCI USB controller"
Signature · 1 line
2.45.2
#2 lore raw
Quoted 7 lines · Fabio Estevam
Quoted 2 lines · Marek Vasut

i.MX95 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6

s/ehci-mx6/ehci-mx7

The driver is still called ehci-mx6.c , the Kconfig symbol contains MX7 in it, but we still use the ehci-mx6.c driver .

#3 lore raw
Quoted 2 lines · Marek Vasut

The driver is still called ehci-mx6.c , the Kconfig symbol contains MX7 in it, but we still use the ehci-mx6.c driver .

You are right, I am sorry for the confusion.