hwmon: (pmbus/max15301): add support for MAX15303
Subsystems (3)
PATCH 1/1 hwmon: (pmbus/max15301): add support for MAX15303
The MAX15303 is a full-featured, flexible, efficient, 6A digital point-of-load (PoL) controller with integrated switching MOSFETs. It contains advanced power management and telemetry features.
Tested-by Robin Getz <[email protected]>
Signed-off-by Nuno Sa <[email protected]>
--- Documentation/hwmon/max15301.rst | 8 ++++++++ drivers/hwmon/pmbus/Kconfig | 2 +- drivers/hwmon/pmbus/max15301.c | 1 + 3 files changed, 10 insertions(+), 1 deletion(-)
Documentation/hwmon/max15301.rst +8 -0
@@ -13,6 +13,14 @@ Supported chips: Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf + * Maxim MAX15303 + + Prefix: 'max15303' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max15303.pdf + Author: Erik Rosen <[email protected]>
drivers/hwmon/pmbus/Kconfig +1 -1
@@ -260,7 +260,7 @@ config SENSORS_MAX15301 tristate "Maxim MAX15301" help If you say yes here you get hardware monitoring support for Maxim - MAX15301, as well as for Flex BMR461. + MAX15301, MAX15303, as well as for Flex BMR461. This driver can also be built as a module. If so, the module will be called max15301.
drivers/hwmon/pmbus/max15301.c +1 -0
@@ -25,6 +25,7 @@static const struct i2c_device_id max15301_id[] = { {"bmr461" }, {"max15301" }, + {"max15303" }, {} };MODULE_DEVICE_TABLE (i2c, max15301_id);
---
base-commit: adc52dd4078067fabf1431036ba180eafd8a7eee
change-id: 20250108-dev-max15303-ec5f96dcbe9b --
Thanks!
- Nuno Sá
Quoted 8 lines · On Wed, Jan 08, 2025 at 04:44:23PM +0000, Nuno Sa via B4 Relay wrote:
From: Nuno Sa <[email protected]>
The MAX15303 is a full-featured, flexible, efficient, 6A digital point-of-load (PoL) controller with integrated switching MOSFETs. It contains advanced power management and telemetry features.
Tested-by Robin Getz <[email protected]>Signed-off-by Nuno Sa <[email protected]>
Applied.
Thanks,
Guenter