drm/amd/pm: add the interface to set and save the bootup workload type
Kenneth Feng
maintainerPATCH v2 1/2 drm/amd/pm: add the interface to set and save the bootup workload type
add the interface to set and save the bootup workload type
v2: add is_support_sw_smu check and pm mutex lock.
--- drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 39 +++++++++++++++++++ drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h | 3 ++ drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 1 + drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 1 + 4 files changed, 44 insertions(+)
drivers/gpu/drm/amd/pm/amdgpu_dpm.c +39 -0
@@ -349,6 +349,45 @@ int amdgpu_dpm_switch_power_profile(struct amdgpu_device *adev,return ret; } +int amdgpu_dpm_set_and_save_bootup_power_profile (struct amdgpu_device *adev, +bool en) +{ +if (!is_support_sw_smu (adev)) +return -EOPNOTSUPP ; + +struct smu_context *smu = (struct smu_context *)(adev->powerplay.pp_handle); +int ret =0 ; +int current_profile_mode; +int saved_profile_mode; + +mutex_lock (&adev->pm.mutex); + current_profile_mode = smu->power_profile_mode; + saved_profile_mode = smu->saved_power_profile_mode; +mutex_unlock (&adev->pm.mutex); + +if (en && current_profile_mode ==PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ) +return 0 ; + +if (!en && current_profile_mode !=PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ) +return 0 ; + +if (en) { + ret =amdgpu_dpm_switch_power_profile (adev, current_profile_mode, !en); +mutex_lock (&adev->pm.mutex); + smu->saved_power_profile_mode = current_profile_mode; + smu->power_profile_mode =PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ; +mutex_unlock (&adev->pm.mutex); + }else { + ret =amdgpu_dpm_switch_power_profile (adev, saved_profile_mode, !en); +mutex_lock (&adev->pm.mutex); + smu->power_profile_mode = saved_profile_mode; + smu->saved_power_profile_mode =PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ; +mutex_unlock (&adev->pm.mutex); + } + +return ret; +} +int amdgpu_dpm_set_xgmi_pstate (struct amdgpu_device *adev,uint32_t pstate) {
drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h +3 -0
@@ -410,6 +410,9 @@ int amdgpu_dpm_switch_power_profile(struct amdgpu_device *adev,enum PP_SMC_POWER_PROFILE type, bool en); +int amdgpu_dpm_set_and_save_bootup_power_profile (struct amdgpu_device *adev, +bool en); +int amdgpu_dpm_baco_reset (struct amdgpu_device *adev);int amdgpu_dpm_mode2_reset (struct amdgpu_device *adev);
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +1 -0
@@ -1272,6 +1272,7 @@ static void smu_init_power_profile(struct smu_context *smu)PP_SMC_POWER_PROFILE_FULLSCREEN3D ; }smu_power_profile_mode_get (smu, smu->power_profile_mode); + smu->saved_power_profile_mode = smu->power_profile_mode; }static int smu_sw_init (struct amdgpu_ip_block *ip_block)
drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +1 -0
@@ -560,6 +560,7 @@ struct smu_context {uint32_t workload_mask;/* default/user workload preference */ uint32_t power_profile_mode; +uint32_t saved_power_profile_mode;uint32_t workload_refcount[PP_SMC_POWER_PROFILE_COUNT ];/* backend specific custom workload settings */ long *custom_profile_params;
Signature · 1 line
2.34.1
Kenneth Feng
maintainerPATCH v2 2/2 drm/amd/display: set the workload based on MALL status
set the workload based on MALL status
--- .../drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c +16 -2
@@ -244,6 +244,8 @@ static void amdgpu_dm_crtc_vblank_control_worker(struct work_struct *work)struct vblank_control_work *vblank_work = container_of(work, struct vblank_control_work, work);struct amdgpu_display_manager *dm = vblank_work->dm; +struct amdgpu_device *adev = dm->adev; +int ret;mutex_lock (&dm->dc_lock);
@@ -252,8 +254,14 @@ static void amdgpu_dm_crtc_vblank_control_worker(struct work_struct *work)else if (dm->active_vblank_irq_count) dm->active_vblank_irq_count--; -if (dm->active_vblank_irq_count >0 ) +if (dm->active_vblank_irq_count >0 ) { + ret =amdgpu_dpm_set_and_save_bootup_power_profile (adev, false); +if (ret) { +dev_err (adev->dev,"(%d) failed to exit bootup workload\n" , ret); +return ; + }dc_allow_idle_optimizations (dm->dc, false); + }/* * Control PSR based on vblank requirements from OS
@@ -271,8 +279,14 @@ static void amdgpu_dm_crtc_vblank_control_worker(struct work_struct *work) vblank_work->acrtc->dm_irq_params.allow_sr_entry); } -if (dm->active_vblank_irq_count ==0 ) +if (dm->active_vblank_irq_count ==0 ) { + ret =amdgpu_dpm_set_and_save_bootup_power_profile (adev, true); +if (ret) { +dev_err (adev->dev,"(%d) failed to set bootup workload\n" , ret); +return ; + }dc_allow_idle_optimizations (dm->dc, true); + }mutex_unlock (&dm->dc_lock);
Signature · 1 line
2.34.1
[AMD Official Use Only - AMD Internal Distribution Only]
-----Original Message-----
From: amd-gfx <[email protected]> On Behalf Of Kenneth Feng
Sent: Wednesday, January 8, 2025 11:36
To: [email protected]
Cc: Pillai, Aurabindo <[email protected]>; Deucher, Alexander <[email protected]>; Feng, Kenneth <[email protected]>
Subject: [PATCH v2 1/2] drm/amd/pm: add the interface to set and save the bootup workload type
add the interface to set and save the bootup workload type
v2: add is_support_sw_smu check and pm mutex lock.
--- drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 39 +++++++++++++++++++ drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h | 3 ++ drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 1 + drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 1 + 4 files changed, 44 insertions(+)
drivers/gpu/drm/amd/pm/amdgpu_dpm.c +35 -0
@@ -349,6 +349,45 @@ int amdgpu_dpm_switch_power_profile(struct amdgpu_device *adev,return ret; } +int amdgpu_dpm_set_and_save_bootup_power_profile (struct amdgpu_device *adev, +bool en) +{ +if (!is_support_sw_smu (adev)) +return -EOPNOTSUPP ; + +struct smu_context *smu = (struct smu_context *)(adev->powerplay.pp_handle); +int ret =0 ; +int current_profile_mode; +int saved_profile_mode; + +mutex_lock (&adev->pm.mutex); + current_profile_mode = smu->power_profile_mode; + saved_profile_mode = smu->saved_power_profile_mode; +mutex_unlock (&adev->pm.mutex); + +if (en && current_profile_mode ==PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ) +return 0 ; + +if (!en && current_profile_mode !=PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ) +return 0 ; + +if (en) { + ret =amdgpu_dpm_switch_power_profile (adev, current_profile_mode, !en); +mutex_lock (&adev->pm.mutex); + smu->saved_power_profile_mode = current_profile_mode; + smu->power_profile_mode =PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ; +mutex_unlock (&adev->pm.mutex); + }else { + ret =amdgpu_dpm_switch_power_profile (adev, saved_profile_mode, !en); +mutex_lock (&adev->pm.mutex); + smu->power_profile_mode = saved_profile_mode; + smu->saved_power_profile_mode =PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT ; +mutex_unlock (&adev->pm.mutex); + }
[kevin]:
I think we'd better check ret value first, then assign new value to smu global profile state? which can avoid some logical errors in some corner cases, is it ok?
Best Regards,
Kevin
+ return ret;
+}
+
int amdgpu_dpm_set_xgmi_pstate(struct amdgpu_device *adev,
uint32_t pstate)
{
drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h +3 -0
@@ -410,6 +410,9 @@ int amdgpu_dpm_switch_power_profile(struct amdgpu_device *adev,enum PP_SMC_POWER_PROFILE type, bool en); +int amdgpu_dpm_set_and_save_bootup_power_profile (struct amdgpu_device *adev, +bool en); +int amdgpu_dpm_baco_reset (struct amdgpu_device *adev); int amdgpu_dpm_mode2_reset(struct amdgpu_device *adev); diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index 8ca793c222ff..a6f748361198 100644
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +1 -0
@@ -1272,6 +1272,7 @@ static void smu_init_power_profile(struct smu_context *smu)PP_SMC_POWER_PROFILE_FULLSCREEN3D ; }smu_power_profile_mode_get (smu, smu->power_profile_mode); + smu->saved_power_profile_mode = smu->power_profile_mode; } static int smu_sw_init(struct amdgpu_ip_block *ip_block) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h
index 3630593bce61..c58fc31fb1d7 100644
drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +1 -0
@@ -560,6 +560,7 @@ struct smu_context {uint32_t workload_mask;/* default/user workload preference */ uint32_t power_profile_mode; +uint32_t saved_power_profile_mode;uint32_t workload_refcount[PP_SMC_POWER_PROFILE_COUNT ];/* backend specific custom workload settings */ long *custom_profile_params;
--
2.34.1