: CLI and feature improvements for check-parallel
cover : CLI and feature improvements for check-parallel
Hi folks,
This patchset brings some new functionality to check-parallel to make it easier to run across different machines and filesystems. The patch seti adds these features:
- auto-adjusts concurrency for the machine it is running on.
- adds CLI support of selection of tests. These CLI parameters are identical to the check CLI parameters and the test lists are built using the same code.
- adds support for logwrites devices so that all the test that use dm-logwrites are now enabled
- adds support for specifying the initial filesystem type to test on the CLI. This makes it easy to select xfs, btrfs, ext4, etc as the target filesystem type that is to be tested.
- Only block device based filesystems can be used with check-parallel, and this is now enforced at FSTYP selection time.
For example, testing the rw group on ext4 is now a simple matter of adding the "-f ext4" parameter to the command line like so:
$ time sudo ./check-parallel -D /mnt/xfs -f ext4 -g rw -x dump Runner 12 Failures: ext4/308 Runner 1 Failures: generic/095 Runner 21 Failures: generic/042 Runner 51 Failures: generic/627 Runner 8 Failures: generic/032 Runner 13 Failures: generic/019 Runner 34 Failures: generic/347 .....
Options like exclude files, groups and lists also work natively in check-parallel now, same as they do in check...
-Dave.
PATCH 1/5 check-parallel: adjust concurrency according to CPU count
From: Dave Chinner <[email protected]>
COncurrency is currently hard coded at 64 worker threads. THis is too many for small CPU count machines; the idea is to create a sustained load of roughly one test per CPU as they are mostly single threaded/single process tests. The number "64" was chosen because I've been developing this functionality on a 64p VM.
Rather than hard coding the concurrency, probe the number of CPUs available and create that many running contexts.
--- check-parallel | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
check-parallel +1 -1
@@ -13,7 +13,7 @@ export SRC_DIR="tests" basedir=$1 shift check_args="$*" -runners=64 +runners=$(getconf _NPROCESSORS_CONF) runner_list=() runtimes=()
Signature · 1 line
2.45.2
PATCH 2/5 check: factor out test list building code
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
factor out all the test list parsing and building code to common/test_list so that it can be used by both check and check-parallel.
--- check | 270 +++---------------------------------------- common/report | 2 +- common/test_list | 295 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 314 insertions(+), 253 deletions(-) create mode 100644 common/test_list
check +18 -252
@@ -15,19 +15,13 @@ notrun=() interrupt=true diff="diff -u" showme=false -have_test_arg=false -randomize=false -exact_order=false export here=`pwd` -xfile="" -subdir_xfile="" brief_test_summary=false do_report=false DUMP_OUTPUT=false iterations=1 istop=false loop_on_fail=0 -exclude_tests=() # This is a global variable used to pass test failure text to reporting gunk _err_msg=""
@@ -49,8 +43,9 @@ timestamp=${TIMESTAMP:=false} rm -f $tmp.list $tmp.tmp $tmp.grep $here/$iam.out $tmp.report.* $tmp.arglist -SRC_GROUPS="generic" -export SRC_DIR="tests" +# We need to include the test list processing first as argument parsing +# requires test list parsing and setup. +. ./common/test_list usage() {
@@ -124,153 +119,12 @@ examples: exit 1 } -get_sub_group_list() -{ - local d=$1 - local grp=$2 - - test -s "$SRC_DIR/$d/group.list" || return 1 - - local grpl=$(sed -n < $SRC_DIR/$d/group.list \ - -e 's/#.*//' \ - -e 's/$/ /' \ - -e "s;^\($VALID_TEST_NAME\).* $grp .*;$SRC_DIR/$d/\1;p") - echo $grpl -} - -get_group_list() -{ - local grp=$1 - local grpl="" - local sub=$(dirname $grp) - local fsgroup="$FSTYP" - - if [ -n "$sub" -a "$sub" != "." -a -d "$SRC_DIR/$sub" ]; then - # group is given as <subdir>/<group> (e.g. xfs/quick) - grp=$(basename $grp) - get_sub_group_list $sub $grp - return - fi - - if [ "$FSTYP" = ext2 -o "$FSTYP" = ext3 ]; then - fsgroup=ext4 - fi - for d in $SRC_GROUPS $fsgroup; do - if ! test -d "$SRC_DIR/$d" ; then - continue - fi - grpl="$grpl $(get_sub_group_list $d $grp)" - done - echo $grpl -} - -# Find all tests, excluding files that are test metadata such as group files. -# It matches test names against $VALID_TEST_NAME defined in common/rc -get_all_tests() -{ - touch $tmp.list - for d in $SRC_GROUPS $FSTYP; do - if ! test -d "$SRC_DIR/$d" ; then - continue - fi - ls $SRC_DIR/$d/* | \ - grep -v "\..*" | \ - grep "^$SRC_DIR/$d/$VALID_TEST_NAME"| \ - grep -v "group\|Makefile" >> $tmp.list 2>/dev/null - done -} - -# takes the list of tests to run in $tmp.list, and removes the tests passed to -# the function from that list. -trim_test_list() -{ - local test_list="$*" - - rm -f $tmp.grep - local numsed=0 - for t in $test_list - do - if [ $numsed -gt 100 ]; then - grep -v -f $tmp.grep <$tmp.list >$tmp.tmp - mv $tmp.tmp $tmp.list - numsed=0 - rm -f $tmp.grep - fi - echo "^$t\$" >>$tmp.grep - numsed=`expr $numsed + 1` - done - grep -v -f $tmp.grep <$tmp.list >$tmp.tmp - mv $tmp.tmp $tmp.list - rm -f $tmp.grep -} - _timestamp() { local now=`date "+%T"` echo -n " [$now]" } -_prepare_test_list() -{ - unset list - # Tests specified on the command line - if [ -s $tmp.arglist ]; then - cat $tmp.arglist > $tmp.list - else - touch $tmp.list - fi - - # Specified groups to include - # Note that the CLI processing adds a leading space to the first group - # parameter, so we have to catch that here checking for "all" - if ! $have_test_arg && [ "$GROUP_LIST" == " all" ]; then - # no test numbers, do everything - get_all_tests - else - for group in $GROUP_LIST; do - list=$(get_group_list $group) - if [ -z "$list" ]; then - echo "Group \"$group\" is empty or not defined?" - exit 1 - fi - - for t in $list; do - grep -s "^$t\$" $tmp.list >/dev/null || \ - echo "$t" >>$tmp.list - done - done - fi - - # Specified groups to exclude - for xgroup in $XGROUP_LIST; do - list=$(get_group_list $xgroup) - if [ -z "$list" ]; then - echo "Group \"$xgroup\" is empty or not defined?" - continue - fi - - trim_test_list $list - done - - # sort the list of tests into numeric order unless we're running tests - # in the exact order specified - if ! $exact_order; then - if $randomize; then - if type shuf >& /dev/null; then - sorter="shuf" - else - sorter="awk -v seed=$RANDOM -f randomize.awk" - fi - else - sorter="cat" - fi - list=`sort -n $tmp.list | uniq | $sorter` - else - list=`cat $tmp.list` - fi - rm -f $tmp.list -} - # Process command arguments first. while [ $# -gt 0 ]; do case "$1" in
@@ -285,48 +139,20 @@ while [ $# -gt 0 ]; do export OVERLAY=true ;; - -g) group=$2 ; shift ; - GROUP_LIST="$GROUP_LIST ${group//,/ }" - ;; + -g) _tl_setup_group $2 ; shift ;; + -e) _tl_setup_exclude_tests $2 ; shift ;; + -E) _tl_setup_exclude_file $2 ; shift ;; + -x) _tl_setup_exclude_group $2; shift ;; + -X) _tl_setup_exclude_subdir $2; shift ;; + -r) _tl_setup_randomise ;; + --exact-order) _tl_setup_ordered ;; - -x) xgroup=$2 ; shift ; - XGROUP_LIST="$XGROUP_LIST ${xgroup//,/ }" - ;; - - -X) subdir_xfile=$2; shift ; - ;; - -e) - xfile=$2; shift ; - readarray -t -O "${#exclude_tests[@]}" exclude_tests < \ - <(echo "$xfile" | tr ', ' '\n\n') - ;; - - -E) xfile=$2; shift ; - if [ -f $xfile ]; then - readarray -t -O ${#exclude_tests[@]} exclude_tests < \ - <(sed "s/#.*$//" $xfile) - fi - ;; -s) RUN_SECTION="$RUN_SECTION $2"; shift ;; -S) EXCLUDE_SECTION="$EXCLUDE_SECTION $2"; shift ;; -l) diff="diff" ;; -udiff) diff="$diff -u" ;; -n) showme=true ;; - -r) - if $exact_order; then - echo "Cannot specify -r and --exact-order." - exit 1 - fi - randomize=true - ;; - --exact-order) - if $randomize; then - echo "Cannnot specify --exact-order and -r." - exit 1 - fi - exact_order=true - ;; -i) iterations=$2; shift ;; -I) iterations=$2; istop=true; shift ;; -T) timestamp=true ;;
@@ -344,13 +170,13 @@ while [ $# -gt 0 ]; do -*) usage ;; *) # not an argument, we've got tests now. - have_test_arg=true ;; + _tl_setup_cli $* esac # if we've found a test specification, the break out of the processing # loop before we shift the arguments so that this is the first argument # that we process in the test arg loop below. - if $have_test_arg; then + if $_tl_have_test_args; then break; fi
@@ -388,51 +214,6 @@ if [ -n "$FUZZ_REWRITE_DURATION" ]; then fi fi -if [ -n "$subdir_xfile" ]; then - for d in $SRC_GROUPS $FSTYP; do - [ -f $SRC_DIR/$d/$subdir_xfile ] || continue - for f in `sed "s/#.*$//" $SRC_DIR/$d/$subdir_xfile`; do - exclude_tests+=($d/$f) - done - done -fi - -# Process tests from command line now. -if $have_test_arg; then - while [ $# -gt 0 ]; do - case "$1" in - -*) echo "Arguments before tests, please!" - status=1 - exit $status - ;; - *) # Expand test pattern (e.g. xfs/???, *fs/001) - list=$(cd $SRC_DIR; echo $1) - for t in $list; do - t=${t#$SRC_DIR/} - test_dir=${t%%/*} - test_name=${t##*/} - group_file=$SRC_DIR/$test_dir/group.list - - if grep -Eq "^$test_name" $group_file; then - # in group file ... OK - echo $SRC_DIR/$test_dir/$test_name \ - >>$tmp.arglist - else - # oops - echo "$t - unknown test, ignored" - fi - done - ;; - esac - - shift - done -elif [ -z "$GROUP_LIST" ]; then - # default group list is the auto group. If any other group or test is - # specified, we use that instead. - GROUP_LIST="auto" -fi - if [ `id -u` -ne 0 ] then echo "check: QA must be run as root"
@@ -593,21 +374,6 @@ _check_filesystems() return $ret } -_expunge_test() -{ - local TEST_ID="$1" - - for f in "${exclude_tests[@]}"; do - # $f may contain traling spaces and comments - local id_regex="^${TEST_ID}\b" - if [[ "$f" =~ ${id_regex} ]]; then - echo " [expunged]" - return 0 - fi - done - return 1 -} - # retain files which would be overwritten in subsequent reruns of the same test _stash_fail_loop_files() { local seq_prefix="${REPORT_DIR}/${1}"
@@ -714,7 +480,7 @@ _run_seq() { } _detect_kmemleak -_prepare_test_list +_tl_prepare_test_list fstests_start_time="$(date +"%F %T")" if $OPTIONS_HAVE_SECTIONS; then
@@ -794,7 +560,7 @@ function run_section() # TEST_DEV could be changed, source common/rc again with # correct FSTYP to get FSTYP specific configs, e.g. common/xfs . common/rc - _prepare_test_list + _tl_prepare_test_list elif [ "$OLD_TEST_FS_MOUNT_OPTS" != "$TEST_FS_MOUNT_OPTS" ]; then _test_unmount 2> /dev/null if ! _test_mount
@@ -859,7 +625,7 @@ function run_section() loop_status=() # track rerun-on-failure state local tc_status ix - local -a _list=( $list ) + local -a _list=( $_tl_tests ) for ((ix = 0; ix < ${#_list[*]}; !${#loop_status[*]} && ix++)); do seq="${_list[$ix]}"
@@ -880,7 +646,7 @@ function run_section() # the filename for the test and the name output are different. # we don't include the tests/ directory in the name output. - export seqnum=${seq#$SRC_DIR/} + export seqnum=$(_tl_strip_src_dir $seq) group=${seqnum%%/*} if $OPTIONS_HAVE_SECTIONS; then REPORT_DIR="$RESULT_BASE/$section"
@@ -902,7 +668,7 @@ function run_section() echo -n "$seqnum" if $showme; then - if _expunge_test $seqnum; then + if _tl_expunge_test $seqnum; then tc_status="expunge" else echo
@@ -928,7 +694,7 @@ function run_section() rm -f $seqres.out.bad $seqres.hints # check if we really should run it - if _expunge_test $seqnum; then + if _tl_expunge_test $seqnum; then tc_status="expunge" _stash_test_status "$seqnum" "$tc_status" continue
common/report +1 -1
@@ -196,7 +196,7 @@ _xunit_make_testcase_report() echo -e "\t\t<skipped/>" >> $report ;; "fail") - local out_src="${SRC_DIR}/${test_name}.out" + local out_src="${_tl_src_dir}/${test_name}.out" local full_file="${REPORT_DIR}/${test_name}.full" local dmesg_file="${REPORT_DIR}/${test_name}.dmesg" local outbad_file="${REPORT_DIR}/${test_name}.out.bad"
common/test_list new file +295 -0
295 lines not on this page · raw message
Signature · 1 line
2.45.2
PATCH 3/5 check-parallel: use common group list parsing code
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Build the test list directly from command line prompts, rather than hard coding the tests and using the check infrastructure to filter that list.
We still pass exact test lists to check to execute the tests that each runner needs to execute, but all other test list commands are no longer passed to check.
As a result of this change, check-parallel no longer passes unknown CLI parameters through to the internal check invocations. At this point, the only non test-list related option is config file section selection; more of the check options will be brought across as needed in future patches.
--- check-parallel | 153 ++++++++++++++++++++++++++++++++++++++++------- common/test_list | 7 +++ 2 files changed, 139 insertions(+), 21 deletions(-)
check-parallel +132 -21
@@ -9,18 +9,115 @@ # for them and runs the test in the background. When it completes, it tears down # the loop devices. -export SRC_DIR="tests" -basedir=$1 -shift -check_args="$*" +basedir="" runners=$(getconf _NPROCESSORS_CONF) runner_list=() runtimes=() +show_test_list= +run_section="" +tmp=/tmp/check-parallel.$$ -# tests in auto group -test_list=$(awk '/^[0-9].*auto/ { print "generic/" $1 }' tests/generic/group.list) -test_list+=$(awk '/^[0-9].*auto/ { print "xfs/" $1 }' tests/xfs/group.list) +export FSTYP=xfs + +# We need to include the test list processing first as argument parsing +# requires test list parsing and setup. +. ./common/test_names +. ./common/test_list + +usage() +{ + echo "Usage: $0 [options] [testlist]"' + +check options + -D <dir> Directory to run in + -n Output test list, do not run tests + -r randomize test order + --exact-order run tests in the exact order specified + -s section run only specified section from config file + +testlist options + -g group[,group...] include tests from these groups + -x group[,group...] exclude tests from these groups + -X exclude_file exclude individual tests + -e testlist exclude a specific list of tests + -E external_file exclude individual tests + [testlist] include tests matching names in testlist + +testlist argument is a list of tests in the form of <test dir>/<test name>. + +<test dir> is a directory under tests that contains a group file, +with a list of the names of the tests in that directory. + +<test name> may be either a specific test file name (e.g. xfs/001) or +a test file name match pattern (e.g. xfs/*). + +group argument is either a name of a tests group to collect from all +the test dirs (e.g. quick) or a name of a tests group to collect from +a specific tests dir in the form of <test dir>/<group name> (e.g. xfs/quick). +If you want to run all the tests in the test suite, use "-g all" to specify all +groups. + +exclude_file argument refers to a name of a file inside each test directory. +for every test dir where this file is found, the listed test names are +excluded from the list of tests to run from that test dir. + +external_file argument is a path to a single file containing a list of tests +to exclude in the form of <test dir>/<test name>. + +examples: + check-parallel -D /mnt xfs/001 + check-parallel -D /mnt -g quick + check-parallel -D /mnt -g xfs/quick + check-parallel -D /mnt -x stress xfs/* + check-parallel -D /mnt -X .exclude -g auto + check-parallel -D /mnt -E ~/.xfstests.exclude +' + exit 1 +} + +# Process command arguments first. +while [ $# -gt 0 ]; do + case "$1" in + -\? | -h | --help) usage ;; + + -D) basedir=$2; shift ;; + -g) _tl_setup_group $2 ; shift ;; + -e) _tl_setup_exclude_tests $2 ; shift ;; + -E) _tl_setup_exclude_file $2 ; shift ;; + -x) _tl_setup_exclude_group $2; shift ;; + -X) _tl_setup_exclude_subdir $2; shift ;; + -r) _tl_setup_randomise ;; + --exact-order) _tl_setup_ordered ;; + -n) show_test_list="yes" ;; + + -s) run_section="$run_section -s $2"; shift ;; + + -*) usage ;; + *) # not an argument, we've got tests now. + _tl_setup_cli $* + esac + + # if we've found a test specification, the break out of the processing + # loop before we shift the arguments so that this is the first argument + # that we process in the test arg loop below. + if $_tl_have_test_args; then + break; + fi + + shift +done + +if [ ! -d "$basedir" ]; then + echo "Invalid basedir specification" + usage +fi +if [ -d "$basedir/runner-0/" ]; then + prev_results=`ls -tr $basedir/runner-0/ | grep results | tail -1` +fi + +_tl_prepare_test_list +_tl_strip_test_list # grab all previously run tests and order them from highest runtime to lowest # We are going to try to run the longer tests first, hopefully so we can avoid
@@ -30,25 +127,23 @@ test_list+=$(awk '/^[0-9].*auto/ { print "xfs/" $1 }' tests/xfs/group.list) # # If we have tests in the test list that don't have runtimes recorded, then # append them to be run last. - -build_runner_list() +time_order_test_list() { local runtimes local run_list=() - local prev_results=`ls -tr $basedir/runner-0/ | grep results | tail -1` runtimes=$(cat $basedir/*/$prev_results/check.time | sort -k 2 -nr | cut -d " " -f 1) # Iterate the timed list first. For every timed list entry that # is found in the test_list, add it to the local runner list. local -a _list=( $runtimes ) - local -a _tlist=( $test_list ) + local -a _tlist=( $_tl_tests ) local rx=0 local ix local jx #set -x for ((ix = 0; ix < ${#_list[*]}; ix++)); do - echo $test_list | grep -q ${_list[$ix]} + echo $_tl_tests | grep -q ${_list[$ix]} if [ $? == 0 ]; then # add the test to the new run list and remove # it from the remaining test list.
@@ -60,20 +155,21 @@ build_runner_list() # The final test list is all the time ordered tests followed by # all the tests we didn't find time records for. - test_list="${run_list[*]} ${_tlist[*]}" + _tl_tests="${run_list[*]} ${_tlist[*]}" } -if [ -f $basedir/runner-0/results/check.time ]; then - build_runner_list +if ! $_tl_randomise -a ! $_tl_exact_order; then + if [ -f $basedir/runner-0/$prev_results/check.time ]; then + time_order_test_list + fi fi # split the list amongst N runners - split_runner_list() { local ix local rx - local -a _list=( $test_list ) + local -a _list=( $_tl_tests ) for ((ix = 0; ix < ${#_list[*]}; ix++)); do seq="${_list[$ix]}" rx=$((ix % $runners))
@@ -137,7 +233,7 @@ runner_go() # Run the tests in it's own mount namespace, as per the comment below # that precedes making the basedir a private mount. - ./src/nsexec -m ./check $check_args -x unreliable_in_parallel --exact-order ${runner_list[$id]} > $me/log 2>&1 + ./src/nsexec -m ./check $run_section -x unreliable_in_parallel --exact-order ${runner_list[$id]} > $me/log 2>&1 wait sleep 1
@@ -165,6 +261,13 @@ cleanup() trap "cleanup; exit" HUP INT QUIT TERM +split_runner_list +if [ -n "$show_test_list" ]; then + echo Time ordered test list: + echo $_tl_tests + echo +fi + # Each parallel test runner needs to only see it's own mount points. If we # leave the basedir as shared, then all tests see all mounts and then we get
@@ -178,15 +281,23 @@ trap "cleanup; exit" HUP INT QUIT TERM # in it's own mount namespace so that they cannot see mounts that other tests # are performing. mount --make-private $basedir -split_runner_list + now=`date +%Y-%m-%d-%H:%M:%S` for ((i = 0; i < $runners; i++)); do - runner_go $i $now & + if [ -n "$show_test_list" ]; then + echo "Runner $i: ${runner_list[$i]}" + else + runner_go $i $now & + fi done; wait +if [ -n "$show_test_list" ]; then + exit 0 +fi + echo -n "Tests run: " grep Ran /mnt/xfs/*/log | sed -e 's,^.*:,,' -e 's, ,\n,g' | sort | uniq | wc -l
@@ -195,7 +306,7 @@ grep Failures: $basedir/*/log | uniq | sed -e "s/^.*Failures://" -e "s,\([0-9]\) echo echo Ten slowest tests - runtime in seconds: -cat $basedir/*/results/check.time | sort -k 2 -nr | head -10 +cat $basedir/*/results-$now/check.time | sort -k 2 -nr | head -10 echo echo Cleanup on Aisle 5?
common/test_list +7 -0
@@ -24,6 +24,7 @@ _tl_file="$tmp.test_list" _tl_exclude_tests=() _tl_tests= +# strip 'tests\' prefix from the provided test name _tl_strip_src_dir() { local test="$1"
@@ -31,6 +32,12 @@ _tl_strip_src_dir() echo ${test#$_tl_src_dir/} } +# strip 'tests\' prefix from all the tests in the test list +_tl_strip_test_list() +{ + _tl_tests=$(echo $_tl_tests | sed -e "s/$_tl_src_dir\///g") +} + get_sub_group_list() { local d=$1
Signature · 1 line
2.45.2
PATCH 4/5 check-parallel: add logwrite device support
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
It is just another loop device per test runner....
--- check-parallel | 4 ++++ 1 file changed, 4 insertions(+)
check-parallel +4 -0
@@ -208,12 +208,14 @@ runner_go() local me=$basedir/runner-$id local _test=$me/test.img local _scratch=$me/scratch.img + local _logwrites=$me/logwrites.img local _results=$me/results-$2 mkdir -p $me xfs_io -f -c 'truncate 2g' $_test xfs_io -f -c 'truncate 8g' $_scratch + xfs_io -f -c 'truncate 1g' $_logwrites mkfs.xfs -f $_test > /dev/null 2>&1
@@ -221,6 +223,7 @@ runner_go() export TEST_DIR=$me/test export SCRATCH_DEV=$(_create_loop_device $_scratch) export SCRATCH_MNT=$me/scratch + export LOGWRITES_DEV=$(_create_loop_device $_logwrites) export FSTYP=xfs export RESULT_BASE=$_results
@@ -241,6 +244,7 @@ runner_go() umount -R $SCRATCH_MNT 2> /dev/null _destroy_loop_device $TEST_DEV _destroy_loop_device $SCRATCH_DEV + _destroy_loop_device $LOGWRITES_DEV grep -q Failures: $me/log if [ $? -eq 0 ]; then
Signature · 1 line
2.45.2
PATCH 5/5 check-parallel: allow FSTYP selection from the CLI
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Add a CLI option to specify the initial FSTYP to test. If this is not specified the the default of "xfs" will be used. This option is different to the way check has FSTYP specified as check-parallel has no infrastructure to support non block device based filesystems and hence we have to reject virtual or network based filesysetms are this point in time.
This patch only implements default mkfs parameter support for the test device. Config sections can be used to override this as check will then format the test device when the section that defines non-default test device mkfs options is selected.
--- check-parallel | 44 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 37 insertions(+), 7 deletions(-)
check-parallel +37 -7
@@ -18,7 +18,7 @@ run_section="" tmp=/tmp/check-parallel.$$ -export FSTYP=xfs +FSTYP= # We need to include the test list processing first as argument parsing # requires test list parsing and setup.
@@ -35,6 +35,7 @@ check options -r randomize test order --exact-order run tests in the exact order specified -s section run only specified section from config file + -f <FSTYPE> specify the filesystem type to test testlist options -g group[,group...] include tests from these groups
@@ -66,16 +67,39 @@ external_file argument is a path to a single file containing a list of tests to exclude in the form of <test dir>/<test name>. examples: - check-parallel -D /mnt xfs/001 - check-parallel -D /mnt -g quick + check-parallel -f xfs -D /mnt xfs/001 + check-parallel -f ext4 -D /mnt -g quick check-parallel -D /mnt -g xfs/quick check-parallel -D /mnt -x stress xfs/* - check-parallel -D /mnt -X .exclude -g auto - check-parallel -D /mnt -E ~/.xfstests.exclude + check-parallel -f btrfs -D /mnt -X .exclude -g auto + check-parallel -f udf -D /mnt -E ~/.xfstests.exclude ' exit 1 } +# Only support block device based filesystems with generic mkfs support +# at the moment. +is_supported_fstype() +{ + local fstype=$1 + + case $fstype in + xfs) ;; + ext2|ext3|ext4) ;; + udf) ;; + jfs) ;; + f2fs) ;; + btrfs) ;; + bcachefs) ;; + gfs2) ;; + ocfs2) ;; + *) + echo "unsupported FSTYPE: $fstype" + usage + ;; + esac +} + # Process command arguments first. while [ $# -gt 0 ]; do case "$1" in
@@ -91,6 +115,8 @@ while [ $# -gt 0 ]; do --exact-order) _tl_setup_ordered ;; -n) show_test_list="yes" ;; + -f) is_supported_fstype $2 ; FSTYP=$2; shift ;; + -s) run_section="$run_section -s $2"; shift ;; -*) usage ;;
@@ -108,6 +134,8 @@ while [ $# -gt 0 ]; do shift done +export FSTYP=${FSTYP:=xfs} + if [ ! -d "$basedir" ]; then echo "Invalid basedir specification" usage
@@ -217,8 +245,6 @@ runner_go() xfs_io -f -c 'truncate 8g' $_scratch xfs_io -f -c 'truncate 1g' $_logwrites - mkfs.xfs -f $_test > /dev/null 2>&1 - export TEST_DEV=$(_create_loop_device $_test) export TEST_DIR=$me/test export SCRATCH_DEV=$(_create_loop_device $_scratch)
@@ -232,6 +258,10 @@ runner_go() mkdir -p $RESULT_BASE rm -f $RESULT_BASE/check.* + # Only supports default mkfs parameters right now + wipefs $TEST_DEV > /dev/null 2>&1 + yes | mkfs -t $FSTYP $TEST_DEV > /dev/null 2>&1 + # export DUMP_CORRUPT_FS=1 # Run the tests in it's own mount namespace, as per the comment below
Signature · 1 line
2.45.2
Quoted 6 lines · Dave Chinner
Hi folks,
This patchset brings some new functionality to check-parallel to make it easier to run across different machines and filesystems. The patch seti adds these features:
Quoted 11 lines
- auto-adjusts concurrency for the machine it is running on.
- adds CLI support of selection of tests. These CLI parameters are identical to the check CLI parameters and the test lists are built using the same code.
- adds support for logwrites devices so that all the test that use dm-logwrites are now enabled
- adds support for specifying the initial filesystem type to test on the CLI. This makes it easy to select xfs, btrfs, ext4, etc as the target filesystem type that is to be tested.
- Only block device based filesystems can be used with check-parallel, and this is now enforced at FSTYP selection time.
Can you please add a --help so that curious users don't have to go find the calling conventions by reading the bash? :)
--D
Quoted 18 lines
For example, testing the rw group on ext4 is now a simple matter of adding the "-f ext4" parameter to the command line like so:
$ time sudo ./check-parallel -D /mnt/xfs -f ext4 -g rw -x dump Runner 12 Failures: ext4/308 Runner 1 Failures: generic/095 Runner 21 Failures: generic/042 Runner 51 Failures: generic/627 Runner 8 Failures: generic/032 Runner 13 Failures: generic/019 Runner 34 Failures: generic/347 .....Options like exclude files, groups and lists also work natively in check-parallel now, same as they do in check...
-Dave.
Quoted 19 lines · Darrick J. Wong
Quoted 6 lines · Dave Chinner
Hi folks,
This patchset brings some new functionality to check-parallel to make it easier to run across different machines and filesystems. The patch seti adds these features:
Quoted 11 lines
- auto-adjusts concurrency for the machine it is running on.
- adds CLI support of selection of tests. These CLI parameters are identical to the check CLI parameters and the test lists are built using the same code.
- adds support for logwrites devices so that all the test that use dm-logwrites are now enabled
- adds support for specifying the initial filesystem type to test on the CLI. This makes it easy to select xfs, btrfs, ext4, etc as the target filesystem type that is to be tested.
- Only block device based filesystems can be used with check-parallel, and this is now enforced at FSTYP selection time.
Quoted 2 lines
Can you please add a --help so that curious users don't have to go find the calling conventions by reading the bash? :)
Oh, there is one in patch 3, please disregard this message.
--D
Quoted 21 lines
--D
Quoted 18 lines
For example, testing the rw group on ext4 is now a simple matter of adding the "-f ext4" parameter to the command line like so:
$ time sudo ./check-parallel -D /mnt/xfs -f ext4 -g rw -x dump Runner 12 Failures: ext4/308 Runner 1 Failures: generic/095 Runner 21 Failures: generic/042 Runner 51 Failures: generic/627 Runner 8 Failures: generic/032 Runner 13 Failures: generic/019 Runner 34 Failures: generic/347 .....Options like exclude files, groups and lists also work natively in check-parallel now, same as they do in check...
-Dave.
Quoted 19 lines · Darrick J. Wong
Quoted 6 lines · Dave Chinner
Hi folks,
This patchset brings some new functionality to check-parallel to make it easier to run across different machines and filesystems. The patch seti adds these features:
Quoted 11 lines
- auto-adjusts concurrency for the machine it is running on.
- adds CLI support of selection of tests. These CLI parameters are identical to the check CLI parameters and the test lists are built using the same code.
- adds support for logwrites devices so that all the test that use dm-logwrites are now enabled
- adds support for specifying the initial filesystem type to test on the CLI. This makes it easy to select xfs, btrfs, ext4, etc as the target filesystem type that is to be tested.
- Only block device based filesystems can be used with check-parallel, and this is now enforced at FSTYP selection time.
Quoted 2 lines
Can you please add a --help so that curious users don't have to go find the calling conventions by reading the bash? :)
Already implemented:
$ ./check-parallel --help Usage: ./check-parallel [options] [testlist]
check options
-D <dir> Directory to run in
-n Output test list, do not run tests
-r randomize test order
--exact-order run tests in the exact order specified
-s section run only specified section from config file
-f <FSTYPE> specify the filesystem type to testtestlist options
-g group[,group...] include tests from these groups -x group[,group...] exclude tests from these groups
-X exclude_file exclude individual tests
-e testlist exclude a specific list of tests
-E external_file exclude individual tests
[testlist] include tests matching names in testlist
testlist argument is a list of tests in the form of <test dir>/<test name>.
<test dir> is a directory under tests that contains a group file, with a list of the names of the tests in that directory.
<test name> may be either a specific test file name (e.g. xfs/001) or a test file name match pattern (e.g. xfs/*).
group argument is either a name of a tests group to collect from all the test dirs (e.g. quick) or a name of a tests group to collect from a specific tests dir in the form of <test dir>/<group name> (e.g. xfs/quick). If you want to run all the tests in the test suite, use "-g all" to specify all groups.
exclude_file argument refers to a name of a file inside each test directory. for every test dir where this file is found, the listed test names are excluded from the list of tests to run from that test dir.
external_file argument is a path to a single file containing a list of tests to exclude in the form of <test dir>/<test name>.
examples:
check-parallel -f xfs -D /mnt xfs/001 check-parallel -f ext4 -D /mnt -g quick check-parallel -D /mnt -g xfs/quick check-parallel -D /mnt -x stress xfs/* check-parallel -f btrfs -D /mnt -X .exclude -g auto check-parallel -f udf -D /mnt -E ~/.xfstests.exclude
$
-Dave.
Signature · 2 lines
Dave Chinner [email protected]