ARM: dts: imxrt1050: Migrate to OF_UPSTREAM
Subsystems (2)
PATCH 1/1 ARM: dts: imxrt1050: Migrate to OF_UPSTREAM
The device tree for imxrt1050 is now
available in the /dts/upstream directory.
Migrate board to use OF_UPSTREAM.
---
Please note /dts/upstream still needs to be updated the upstream commit is 5f122030061db3e5d2bddd9cf5c583deaa6c54ff
--- arch/arm/dts/imxrt1050-evk.dts | 72 -- arch/arm/dts/imxrt1050-pinfunc.h | 993 --------------------------- arch/arm/dts/imxrt1050.dtsi | 160 ----- configs/imxrt1050-evk_defconfig | 3 +- configs/imxrt1050-evk_fspi_defconfig | 3 +- 5 files changed, 4 insertions(+), 1227 deletions(-) delete mode 100644 arch/arm/dts/imxrt1050-evk.dts delete mode 100644 arch/arm/dts/imxrt1050-pinfunc.h delete mode 100644 arch/arm/dts/imxrt1050.dtsi
arch/arm/dts/imxrt1050-evk.dts deleted +0 -72
@@ -1,72 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2019 - * Author(s): Giulio Benetti <[email protected]> - */ - -/dts-v1/; -#include "imxrt1050.dtsi" -#include "imxrt1050-pinfunc.h" - -/ { - model = "NXP IMXRT1050-evk board"; - compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; - - chosen { - stdout-path = &lpuart1; - }; - - aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - mmc0 = &usdhc1; - serial0 = &lpuart1; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x2000000>; - }; -}; - -&lpuart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart1>; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl_lpuart1: lpuart1grp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 - MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 - >; - }; - - pinctrl_usdhc0: usdhc0grp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 - MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 - MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 - >; - }; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc0>; - pinctrl-1 = <&pinctrl_usdhc0>; - pinctrl-2 = <&pinctrl_usdhc0>; - pinctrl-3 = <&pinctrl_usdhc0>; - cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - status = "okay"; -};
arch/arm/dts/imxrt1050-pinfunc.h deleted +0 -993
993 lines not on this page · raw message
arch/arm/dts/imxrt1050.dtsi deleted +0 -160
160 lines not on this page · raw message
configs/imxrt1050-evk_defconfig +2 -1
@@ -13,7 +13,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20020000 CONFIG_ENV_OFFSET=0x80000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imxrt1050-evk" +CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imxrt1050-evk" CONFIG_TARGET_IMXRT1050_EVK=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y
@@ -48,6 +48,7 @@ CONFIG_CMD_USB=y # CONFIG_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_UPSTREAM=y CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y
configs/imxrt1050-evk_fspi_defconfig +2 -1
@@ -15,7 +15,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20020000 CONFIG_ENV_OFFSET=0x80000 CONFIG_IMX_CONFIG="board/freescale/imxrt1050-evk/imximage-nor.cfg" CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imxrt1050-evk" +CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imxrt1050-evk" CONFIG_TARGET_IMXRT1050_EVK=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y
@@ -50,6 +50,7 @@ CONFIG_CMD_USB=y # CONFIG_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_UPSTREAM=y CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Signature · 1 line
2.45.2
Quoted 11 lines
Subject: [PATCH] ARM: dts: imxrt1050: Migrate to
OF_UPSTREAMThe device tree for imxrt1050 is now available in the /dts/upstream directory. Migrate board to use
OF_UPSTREAM.Signed-off-by Jesse Taube <[email protected]>---
Please note /dts/upstream still needs to be updated the upstream commit is5f122030061db3e5d2bddd9cf5c583deaa6c54ff
You might need to update the dts/upstream to make
this patch in.
Regards
Peng
Quoted 6 lines · Peng Fan
Quoted 6 lines
Subject: [PATCH] ARM: dts: imxrt1050: Migrate to
OF_UPSTREAMThe device tree for imxrt1050 is now available in the /dts/upstream directory. Migrate board to use
OF_UPSTREAM.
Quoted 8 lines
Quoted 5 lines
Signed-off-by Jesse Taube <[email protected]>---
Please note /dts/upstream still needs to be updated the upstream commit is5f122030061db3e5d2bddd9cf5c583deaa6c54ffYou might need to update the dts/upstream to make
this patch in.
Yes, you either need to wait for the next re-sync or to send the cherry-pick as well, see
https://docs.u-boot.org/en/latest/develop/devicetree/control.html#resyncing-with-devicetree-rebasing
Thanks!
Signature · 1 line
Tom