mips: add support for Siflower MIPS SoCs
Subsystems (2)
PATCH 1/1 mips: add support for Siflower MIPS SoCs
Siflower MIPS SoCs like SF19A2890 uses dual-core MIPS InterAptiv processor, built-in GMAC, USB, dual-band WiFi and various other peripherals.
Notably, it uses some ARM PLxxx peripherals, and ARM_AMBA is selected for the drivers.
Most devices on the market with this chip come with 64M or less DRAM. A kmalloc.h with malloc alignment override is added to conserve memory, and a MACH_SIFLOWER_MIPS is created with reduced features instead of using the generic kernel.
--- arch/mips/Kconfig | 30 +++++++++++++++++++ arch/mips/generic/Platform | 1 + arch/mips/include/asm/mach-siflower/kmalloc.h | 9 ++++++ 3 files changed, 40 insertions(+) create mode 100644 arch/mips/include/asm/mach-siflower/kmalloc.h
arch/mips/Kconfig +30 -0
@@ -895,6 +895,36 @@ config SIBYTE_BIGSUR select ZONE_DMA32 if 64BIT select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI +config MACH_SIFLOWER_MIPS + bool "Siflower MIPS SoCs" + select MIPS_GENERIC + select MACH_GENERIC_CORE + select ARM_AMBA + select BOOT_RAW + select CEVT_R4K + select CLKSRC_MIPS_GIC + select COMMON_CLK + select CPU_MIPSR2_IRQ_EI + select CPU_MIPSR2_IRQ_VI + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_MIPS_CPU + select MIPS_CPU_SCACHE + select MIPS_GIC + select MIPS_L1_CACHE_SHIFT_5 + select NO_EXCEPT_FILL + select SMP_UP if SMP + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_MIPS_CPS + select SYS_SUPPORTS_MULTITHREADING + select USE_OF + help + Select this to build a kernel which supports SoCs from Siflower + with MIPS InterAptiv cores, like Siflower SF19A2890. + config SNI_RM bool "SNI RM200/300/400" select ARC_MEMORY
arch/mips/generic/Platform +1 -0
@@ -10,6 +10,7 @@ # Note: order matters, keep the asm/mach-generic include last. cflags-$(CONFIG_MACH_INGENIC_SOC) += -I$(srctree)/arch/mips/include/asm/mach-ingenic +cflags-$(CONFIG_MACH_SIFLOWER_MIPS) += -I$(srctree)/arch/mips/include/asm/mach-siflower cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
arch/mips/include/asm/mach-siflower/kmalloc.h new file +9 -0
@@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_MACH_SIFLOWER_KMALLOC_H +#define __ASM_MACH_SIFLOWER_KMALLOC_H + +#ifdef CONFIG_DMA_NONCOHERENT +#define ARCH_DMA_MINALIGN 32 +#endif + +#endif /* __ASM_MACH_SIFLOWER_KMALLOC_H */
Signature · 1 line
2.48.1
Quoted 11 lines · 在2025年1月20日一月 上午1:52,Chuanhong Guo写道:
Siflower MIPS SoCs like SF19A2890 uses dual-core MIPS InterAptiv processor, built-in GMAC, USB, dual-band WiFi and various other peripherals.
Notably, it uses some ARM PLxxx peripherals, andARM_AMBAis selected for the drivers.
Most devices on the market with this chip come with 64M or less DRAM. Akmalloc.hwith malloc alignment override is added to conserve memory, and aMACH_SIFLOWER_MIPSis created with reduced features instead of using the generic kernel.Signed-off-by Chuanhong Guo <[email protected]>
Hmm, why not using MIPS_GENERIC.
Thanks
- Jiaxun
[...]
Signature · 1 line
- Jiaxun
Quoted 14 lines · Jiaxun Yang
Quoted 10 lines · 在2025年1月20日一月 上午1:52,Chuanhong Guo写道:
Siflower MIPS SoCs like SF19A2890 uses dual-core MIPS InterAptiv processor, built-in GMAC, USB, dual-band WiFi and various other peripherals.
Notably, it uses some ARM PLxxx peripherals, andARM_AMBAis selected for the drivers.
Most devices on the market with this chip come with 64M or less DRAM. Akmalloc.hwith malloc alignment override is added to conserve memory, and aMACH_SIFLOWER_MIPSis created with reduced features instead of using the generic kernel.
Quoted 3 lines
Quoted 1 line
Signed-off-by Chuanhong Guo <[email protected]>Hmm, why not using
MIPS_GENERIC.
Mainly to override MIPS_L1_CACHE_SHIFT and ARCH_DMA_MINALIGN. This saves about 1MB of memory if I remember correctly.
Signature · 2 lines
Regards, Chuanhong Guo