wifi: mwifiex: Resolve the failure in downloading calibration data.
PATCH 1/1 wifi: mwifiex: Resolve the failure in downloading calibration data.
Correct the command format for downloading calibration data.
--- drivers/net/wireless/marvell/mwifiex/fw.h | 7 +++++++ drivers/net/wireless/marvell/mwifiex/main.c | 4 ---- .../net/wireless/marvell/mwifiex/sta_cmd.c | 19 +++++++++++++------ 3 files changed, 20 insertions(+), 10 deletions(-)
drivers/net/wireless/marvell/mwifiex/fw.h +7 -0
@@ -2352,6 +2352,12 @@ struct host_cmd_ds_add_station {u8 tlv[]; } __packed; +struct host_cmd_ds_802_11_cfg_data { +__le16 action; +__le16 type; +__le16 data_len; +} __packed; +struct host_cmd_ds_command {__le16 command;__le16 size;
@@ -2431,6 +2437,7 @@ struct host_cmd_ds_command {struct host_cmd_ds_pkt_aggr_ctrl pkt_aggr_ctrl;struct host_cmd_ds_sta_configure sta_cfg;struct host_cmd_ds_add_station sta_info; +struct host_cmd_ds_802_11_cfg_data cfg_data; } params; } __packed;
drivers/net/wireless/marvell/mwifiex/main.c +0 -4
@@ -691,10 +691,6 @@ static int _mwifiex_fw_dpc(const struct firmware *firmware, void *context) init_failed = true; done: -if (adapter->cal_data) { -release_firmware (adapter->cal_data); - adapter->cal_data =NULL ; - }if (adapter->firmware) {release_firmware (adapter->firmware); adapter->firmware =NULL ;
drivers/net/wireless/marvell/mwifiex/sta_cmd.c +13 -6
@@ -1500,18 +1500,19 @@ int mwifiex_dnld_dt_cfgdata(struct mwifiex_private *priv,/* This function prepares command of set_cfg_data. */ static int mwifiex_cmd_cfg_data (struct mwifiex_private *priv, -struct host_cmd_ds_command *cmd,void *data_buf) +struct host_cmd_ds_command *cmd,void *data_buf,u16 cmd_action) {struct mwifiex_adapter *adapter = priv->adapter;struct property *prop = data_buf;u32 len;u8 *data = (u8 *)cmd +S_DS_GEN ;int ret; +struct host_cmd_ds_802_11_cfg_data *pcfg_data = &cmd->params.cfg_data;if (prop) { len = prop->length; ret =of_property_read_u8_array (adapter->dt_node, prop->name, - data, len); + data +sizeof (*pcfg_data), len);if (ret)return ret; mwifiex_dbg(adapter, INFO,
@@ -1519,15 +1520,18 @@ static int mwifiex_cmd_cfg_data(struct mwifiex_private *priv, prop->name); }else if (adapter->cal_data->data && adapter->cal_data->size >0 ) { len =mwifiex_parse_cal_cfg ((u8 *)adapter->cal_data->data, - adapter->cal_data->size, data); + adapter->cal_data->size, data +sizeof (*pcfg_data));mwifiex_dbg (adapter,INFO ,"download cfg_data from config file\n" ); }else {return -1 ; } + pcfg_data->action =cpu_to_le16 (cmd_action); + pcfg_data->type =cpu_to_le16 (2 ); + pcfg_data->data_len =cpu_to_le16 (len); cmd->command =cpu_to_le16 (HostCmd_CMD_CFG_DATA); - cmd->size =cpu_to_le16 (S_DS_GEN + len); + cmd->size =cpu_to_le16 (S_DS_GEN +sizeof (*pcfg_data) + len);return 0 ; }
@@ -1949,7 +1953,7 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no, ret =mwifiex_cmd_get_hw_spec (priv, cmd_ptr);break ;case HostCmd_CMD_CFG_DATA: - ret =mwifiex_cmd_cfg_data (priv, cmd_ptr, data_buf); + ret =mwifiex_cmd_cfg_data (priv, cmd_ptr, data_buf, cmd_action);break ;case HostCmd_CMD_MAC_CONTROL: ret = mwifiex_cmd_mac_control(priv, cmd_ptr, cmd_action,
@@ -2293,9 +2297,12 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init) "marvell,caldata"); } -if (adapter->cal_data) +if (adapter->cal_data) {mwifiex_send_cmd (priv, HostCmd_CMD_CFG_DATA, HostCmd_ACT_GEN_SET,0 ,NULL , true); +release_firmware (adapter->cal_data); + adapter->cal_data =NULL ; + }/* Read MAC address from HW */ ret = mwifiex_send_cmd(priv, HostCmd_CMD_GET_HW_SPEC,
Signature · 1 line
2.34.1
PATCH 2/2 wifi: mwifiex: Fix the wrong hardware setting for HT40.
Add the missing bandwidth configuration for HT40.
--- drivers/net/wireless/marvell/mwifiex/11n.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/net/wireless/marvell/mwifiex/11n.c +10 -8
@@ -308,7 +308,7 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,int ret_len =0 ;struct ieee80211_supported_band *sband;struct ieee_types_header *hdr; -u8 radio_type; +u8 radio_type, secch_offset;if (!buffer || !*buffer)return ret_len;
@@ -401,13 +401,15 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, chan_list->chan_scan_param[0 ].radio_type =mwifiex_band_to_radio_type ((u8 ) bss_desc->bss_band); -if (sband->ht_cap.cap &IEEE80211_HT_CAP_SUP_WIDTH_20_40 && - bss_desc->bcn_ht_oper->ht_param & -IEEE80211_HT_PARAM_CHAN_WIDTH_ANY ) -SET_SECONDARYCHAN (chan_list->chan_scan_param[0 ]. - radio_type, - (bss_desc->bcn_ht_oper->ht_param & -IEEE80211_HT_PARAM_CHA_SEC_OFFSET )); +if (sband->ht_cap.cap &IEEE80211_HT_CAP_SUP_WIDTH_20_40 ) { +if (bss_desc->bcn_ht_oper->ht_param &IEEE80211_HT_PARAM_CHAN_WIDTH_ANY ) { + chan_list->chan_scan_param[0 ].radio_type |= (CHAN_BW_40MHZ <<2 ); + secch_offset = bss_desc->bcn_ht_oper->ht_param & +IEEE80211_HT_PARAM_CHA_SEC_OFFSET ; +SET_SECONDARYCHAN (chan_list->chan_scan_param[0 ].radio_type, + secch_offset); + } + } *buffer +=struct_size (chan_list, chan_scan_param,1 ); ret_len +=struct_size (chan_list, chan_scan_param,1 );
Signature · 1 line
2.34.1
Francesco Dolcini
reviewerRe: [PATCH 2/2] wifi: mwifiex: Fix the wrong hardware setting for HT40.
Hello Jeff,
thanks for the patch.
Quoted 1 line · Jeff Chen
Add the missing bandwidth configuration for HT40.
Can you expand this a little bit?
- Is this a regression?
- What is the impact of this missing configuration? It's not working at all? It's working in some unexpected way (please explain)?
- Should this backported to stable (probably given the answer before it should be obvious the answer to this question)?
Anything else worth mentioning?
Quoted 23 lines
Signed-off-by Jeff Chen <[email protected]>--- drivers/net/wireless/marvell/mwifiex/11n.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)drivers/net/wireless/marvell/mwifiex/11n.c +1
-1@@ -308,7 +308,7 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,int ret_len =0 ;struct ieee80211_supported_band *sband;struct ieee_types_header *hdr; -u8 radio_type; +u8 radio_type, secch_offset;if (!buffer || !*buffer)return ret_len;@@ -401,13 +401,15 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, chan_list->chan_scan_param[0 ].radio_type =mwifiex_band_to_radio_type ((u8 ) bss_desc->bss_band);
drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, · line 406
Quoted 10 lines
drivers/net/wireless/marvell/mwifiex/11n.c +3
-7-if (sband->ht_cap.cap &IEEE80211_HT_CAP_SUP_WIDTH_20_40 && - bss_desc->bcn_ht_oper->ht_param & -IEEE80211_HT_PARAM_CHAN_WIDTH_ANY ) -SET_SECONDARYCHAN (chan_list->chan_scan_param[0 ]. - radio_type, - (bss_desc->bcn_ht_oper->ht_param & -IEEE80211_HT_PARAM_CHA_SEC_OFFSET )); +if (sband->ht_cap.cap &IEEE80211_HT_CAP_SUP_WIDTH_20_40 ) { +if (bss_desc->bcn_ht_oper->ht_param &IEEE80211_HT_PARAM_CHAN_WIDTH_ANY ) { + chan_list->chan_scan_param[0 ].radio_type |= (CHAN_BW_40MHZ <<2 );
setting radio_type |= (CHAN_BW_40MHZ << 2) seems the only real change on this patch, correct? Anything else is cosmetic, correct?
would doing just this change be equivalent, right?
SET_SECONDARYCHAN(chan_list->chan_scan_param[0]. radio_type | (CHAN_BW_40MHZ << 2), (bss_desc->bcn_ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET));
Francesco
RE: [EXT] Re: [PATCH 2/2] wifi: mwifiex: Fix the wrong hardware setting for HT40.
Quoted 82 lines
-----Original Message-----
From: Francesco Dolcini <[email protected]>
Sent: Monday, January 20, 2025 7:12 PM
To: Jeff Chen <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Pete Hsieh <[email protected]>; [email protected]
Subject: [EXT] Re: [PATCH 2/2] wifi: mwifiex: Fix the wrong hardware setting for HT40.Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button
Hello Jeff,
thanks for the patch.Quoted 1 line · Jeff Chen
Add the missing bandwidth configuration for HT40.
Can you expand this a little bit?
- Is this a regression?
- What is the impact of this missing configuration? It's not working at all? It's working in some unexpected way (please explain)?
- Should this backported to stable (probably given the answer before it should be obvious the answer to this question)?Anything else worth mentioning?
drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct
Quoted 12 lines
Signed-off-by Jeff Chen <[email protected]>--- drivers/net/wireless/marvell/mwifiex/11n.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)drivers/net/wireless/marvell/mwifiex/11n.c +0
-0@@ -308,7 +308,7 @@ mwifiex_cmd_append_11n_tlv(struct
mwifiex_private*priv,drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct
Quoted 9 lines
drivers/net/wireless/marvell/mwifiex/11n.c +1
-1int ret_len =0 ;struct ieee80211_supported_band *sband;struct ieee_types_header *hdr; -u8 radio_type; +u8 radio_type, secch_offset;if (!buffer || !*buffer)return ret_len;@@ -401,13 +401,15 @@ mwifiex_cmd_append_11n_tlv(struct
mwifiex_private*priv,drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 405
Quoted 5 lines
drivers/net/wireless/marvell/mwifiex/11n.c +0
-1chan_list->chan_scan_param[0 ].radio_type =mwifiex_band_to_radio_type ((u8 ) bss_desc->bss_band); - if (sband->ht_cap.cap &
IEEE80211_HT_CAP_SUP_WIDTH_20_40&&drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
Quoted 3 lines
drivers/net/wireless/marvell/mwifiex/11n.c +0
-3- bss_desc->bcn_ht_oper->ht_param & - IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) -SET_SECONDARYCHAN(chan_list->chan_scan_param[0].
drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 410
Quoted 2 lines
drivers/net/wireless/marvell/mwifiex/11n.c +0
-2- radio_type, -(
bss_desc->bcn_ht_oper->ht_param&drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 411
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +0
-1-
IEEE80211_HT_PARAM_CHA_SEC_OFFSET));drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 405
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+ if (sband->ht_cap.cap &
IEEE80211_HT_CAP_SUP_WIDTH_20_40) {drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 406
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+ if (bss_desc->bcn_ht_oper->ht_param &
IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) {drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 407
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+chan_list->chan_scan_param[0].radio_type
drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 408
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+ |= (CHAN_BW_40MHZ << 2);setting
radio_type |= (CHAN_BW_40MHZ << 2)seems the only real change on this patch, correct? Anything else is cosmetic, correct?would doing just this change be equivalent, right?
Quoted 7 lines
SET_SECONDARYCHAN(chan_list->chan_scan_param[0]. radio_type | (CHAN_BW_40MHZ << 2), (bss_desc->bcn_ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET));Francesco
Hi Francesco,
Thank you for the review and advice.
I will revise the patch and provide more detailed descriptions.
Jeff
RE: [EXT] Re: [PATCH 2/2] wifi: mwifiex: Fix the wrong hardware setting for HT40.
In reply to Francesco DolciniHello Francesco,
Thank you for reviewing the patch.
Quoted 11 lines
-----Original Message-----
From: Francesco Dolcini <[email protected]>
Sent: Monday, January 20, 2025 7:12 PM
To: Jeff Chen <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Pete Hsieh <[email protected]>; [email protected]
Subject: [EXT] Re: [PATCH 2/2] wifi: mwifiex: Fix the wrong hardware setting for HT40.
Quoted 3 lines
Can you expand this a little bit?
- Is this a regression?
- No, this is not a regression.
Quoted 1 line
- What is the impact of this missing configuration? It's not working at all?
Without this configuration, the connection operates at 20MHz even if the access point supports 40MHz bandwidth. This means that while the device can connect, it does so with reduced bandwidth, potentially affecting performance and throughput.
Quoted 1 line
It's working in some unexpected way (please explain)?
As mentioned above, the connection operates at 20MHz even if the access point supports 40MHz bandwidth.
Quoted 2 lines
- Should this backported to stable (probably given the answer before it should be obvious the answer to this question)?
Considering that HT40 mode is not commonly used on the 2.4GHz band due to limited bandwidth and potential interference, backporting this fix may not be necessary.
Quoted 3 lines
Anything else worth mentioning?
There is nothing additional to mention.
Quoted 58 lines
drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct
Quoted 12 lines
Signed-off-by Jeff Chen <[email protected]>--- drivers/net/wireless/marvell/mwifiex/11n.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)drivers/net/wireless/marvell/mwifiex/11n.c +0
-0@@ -308,7 +308,7 @@ mwifiex_cmd_append_11n_tlv(struct
mwifiex_private*priv,drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct
Quoted 9 lines
drivers/net/wireless/marvell/mwifiex/11n.c +1
-1int ret_len =0 ;struct ieee80211_supported_band *sband;struct ieee_types_header *hdr; -u8 radio_type; +u8 radio_type, secch_offset;if (!buffer || !*buffer)return ret_len;@@ -401,13 +401,15 @@ mwifiex_cmd_append_11n_tlv(struct
mwifiex_private*priv,drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 405
Quoted 5 lines
drivers/net/wireless/marvell/mwifiex/11n.c +0
-1chan_list->chan_scan_param[0 ].radio_type =mwifiex_band_to_radio_type ((u8 ) bss_desc->bss_band); - if (sband->ht_cap.cap &
IEEE80211_HT_CAP_SUP_WIDTH_20_40&&drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
Quoted 3 lines
drivers/net/wireless/marvell/mwifiex/11n.c +0
-3- bss_desc->bcn_ht_oper->ht_param & - IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) -SET_SECONDARYCHAN(chan_list->chan_scan_param[0].
drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 410
Quoted 2 lines
drivers/net/wireless/marvell/mwifiex/11n.c +0
-2- radio_type, -(
bss_desc->bcn_ht_oper->ht_param&drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 411
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +0
-1-
IEEE80211_HT_PARAM_CHA_SEC_OFFSET));drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 405
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+ if (sband->ht_cap.cap &
IEEE80211_HT_CAP_SUP_WIDTH_20_40) {drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 406
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+ if (bss_desc->bcn_ht_oper->ht_param &
IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) {drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 407
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+chan_list->chan_scan_param[0].radio_type
drivers/net/wireless/marvell/mwifiex/11n.c mwifiex_cmd_append_11n_tlv(struct · line 408
Quoted 1 line
drivers/net/wireless/marvell/mwifiex/11n.c +1
-0+ |= (CHAN_BW_40MHZ << 2);setting
radio_type |= (CHAN_BW_40MHZ << 2)seems the only real change on this patch, correct? Anything else is cosmetic, correct?would doing just this change be equivalent, right?
SET_SECONDARYCHAN(chan_list->chan_scan_param[0]. radio_type | (CHAN_BW_40MHZ << 2), (bss_desc->bcn_ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET));Francesco
Quoted 3 lines · Jeff Chen
Correct the command format for downloading calibration data.
Signed-off-by Jeff Chen <[email protected]>
Like Francesco mentioned in patch 2, please also expand here why you are doing all this. One sentence commit message is usually a bad idea, unless the patch is really trivial.
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 19 lines
-----Original Message-----
From: Kalle Valo <[email protected]>
Sent: Monday, January 20, 2025 8:31 PM
To: Jeff Chen <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Pete Hsieh <[email protected]>; [email protected]
Subject: [EXT] Re: [PATCH] wifi: mwifiex: Resolve the failure in downloading calibration data.Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button
Quoted 2 lines · Jeff Chen
Correct the command format for downloading calibration data.
Quoted 7 lines
Quoted 1 line
Signed-off-by Jeff Chen <[email protected]>Like Francesco mentioned in patch 2, please also expand here why you are doing all this. One sentence commit message is usually a bad idea, unless the patch is really trivial.
--
Hi Kalle,
Thanks for review. I will add more detailed descriptions.
Jeff