acpi: Fix HED module initialization order when it is built-in
PATCH v3 1/1 acpi: Fix HED module initialization order when it is built-in
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by Makefile order. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.
If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Change the initcall level of HED to subsys_init to fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change the ACPI_HED from tristate to bool.
--- drivers/acpi/Kconfig | 2 +- drivers/acpi/hed.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/acpi/Kconfig +1 -1
@@ -452,7 +452,7 @@ config ACPI_SBS the modules will be called sbs and sbshc. config ACPI_HED - tristate "Hardware Error Device" + bool "Hardware Error Device" help This driver supports the Hardware Error Device (PNP0C33), which is used to report some hardware errors notified via
drivers/acpi/hed.c +1 -0
@@ -81,6 +81,7 @@ static struct acpi_driver acpi_hed_driver = { }, };module_acpi_driver (acpi_hed_driver); +subsys_initcall (acpi_hed_driver_init);MODULE_AUTHOR ("Huang Ying" );MODULE_DESCRIPTION ("ACPI Hardware Error Device Driver" );
Signature · 1 line
2.33.0
Quoted 10 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Quoted 5 lines
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.Reviewed-by Jonathan Cameron <[email protected]>
Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.
Thanks,
Jonathan
Quoted 31 lines
Signed-off-by Xiaofei Tan <[email protected]>--- drivers/acpi/Kconfig | 2 +- drivers/acpi/hed.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)drivers/acpi/Kconfig +1
-1@@ -452,7 +452,7 @@ config ACPI_SBS the modules will be called sbs and sbshc. config ACPI_HED - tristate "Hardware Error Device" + bool "Hardware Error Device" help This driver supports the Hardware Error Device (PNP0C33), which is used to report some hardware errors notified viadrivers/acpi/hed.c +1
-0@@ -81,6 +81,7 @@ static struct acpi_driver acpi_hed_driver = { }, };module_acpi_driver (acpi_hed_driver); +subsys_initcall (acpi_hed_driver_init);MODULE_AUTHOR ("Huang Ying" );MODULE_DESCRIPTION ("ACPI Hardware Error Device Driver" );
Quoted 13 lines · Jonathan Cameron
Quoted 10 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Quoted 8 lines
Quoted 5 lines
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.Reviewed-by Jonathan Cameron <[email protected]>Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.
OK. thanks.
Quoted 36 lines
Thanks,
Jonathan
Quoted 24 lines
Signed-off-by Xiaofei Tan <[email protected]>--- drivers/acpi/Kconfig | 2 +- drivers/acpi/hed.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)drivers/acpi/Kconfig +1
-1@@ -452,7 +452,7 @@ config ACPI_SBS the modules will be called sbs and sbshc. config ACPI_HED - tristate "Hardware Error Device" + bool "Hardware Error Device" help This driver supports the Hardware Error Device (PNP0C33), which is used to report some hardware errors notified viadrivers/acpi/hed.c +0
-0drivers/acpi/hed.c static struct acpi_driver acpi_hed_driver = { · line 87
Quoted 7 lines
drivers/acpi/hed.c +1
-0@@ -81,6 +81,7 @@ static struct acpi_driver acpi_hed_driver = { }, };module_acpi_driver (acpi_hed_driver); +subsys_initcall (acpi_hed_driver_init);MODULE_AUTHOR ("Huang Ying" );MODULE_DESCRIPTION ("ACPI Hardware Error Device Driver" );.
Quoted 20 lines · Xiaofei Tan
Quoted 17 lines · Jonathan Cameron
Quoted 14 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.
Quoted 5 lines
Quoted 4 lines
Quoted 1 line
Reviewed-by Jonathan Cameron <[email protected]>Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.OK. thanks.
Applied as 6.14-rc material with a rewritten changelog and under a new
subject: "ACPI: HED: Always initialize before evged".
Thanks!
Quoted 25 lines · Rafael J. Wysocki
Quoted 24 lines · Xiaofei Tan
Quoted 21 lines · Jonathan Cameron
Quoted 10 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Quoted 5 lines
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.Reviewed-by Jonathan Cameron <[email protected]>Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.
Quoted 6 lines
Quoted 1 line
OK. thanks.
Applied as 6.14-rc material with a rewritten changelog and under a new
subject: "ACPI: HED: Always initialize before evged".Thanks!
For what it's worth, I just bisected a new error message that I see when booting several x86_64 distribution configurations in QEMU to this change in -next as commit 19badc4e57c6 ("ACPI: HED: Always initialize before evged"):
$ curl -LSso .config https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/raw/main/config
$ make -skj"$(nproc)" ARCH=x86_64 CROSS_COMPILE=x86_64-linux- olddefconfig bzImage
$ qemu-system-x86_64 \
-display none \
-nodefaults \
-M q35 \
-d unimp,guest_errors \
-append 'console=ttyS0 earlycon=uart8250,io,0x3f8' \
-kernel arch/x86/boot/bzImage \
-initrd rootfs.cpio \
-cpu host \
-enable-kvm \
-m 512m \
-smp 8
-serial mon:stdio
...
[ 0.535126] Error: Driver 'hardware_error_device' is already registered, aborting...
...If there is any additional information I can provide or patches I can test, I am more than happy to do so. Apologies if this has already been reported or resolved, I did a search on the mailing list and I did not see anything.
Cheers,
Nathan
# bad: [9a87ce288fe30f268b3a598422fe76af9bb2c2d2] Add linux-next specific files for 20250128
# good: [805ba04cb7ccfc7d72e834ebd796e043142156ba] Merge tag 'mips_6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
git bisect start '9a87ce288fe30f268b3a598422fe76af9bb2c2d2' '805ba04cb7ccfc7d72e834ebd796e043142156ba'
# bad: [e317bfe93c72e10dc02caac8b8b4b064291c352e] Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm.git
git bisect bad e317bfe93c72e10dc02caac8b8b4b064291c352e
# good: [31d2d7cb6ca6c6159e22bf708c089b7af11f1585] Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux.git
git bisect good 31d2d7cb6ca6c6159e22bf708c089b7af11f1585
# good: [bd19f1e807f92f27654e0bb2790fe31b6af58daf] Merge branch 'docs-next' of git://git.lwn.net/linux.git
git bisect good bd19f1e807f92f27654e0bb2790fe31b6af58daf
# bad: [1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79] Merge branch 'for-next' of git://git.kernel.dk/linux-block.git
git bisect bad 1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79
# bad: [f572a6cf38985ca5d4df4cae1e3e74464774d033] Merge branch 'drm-next' of https://gitlab.freedesktop.org/drm/kernel.git
git bisect bad f572a6cf38985ca5d4df4cae1e3e74464774d033
# bad: [e30de3809c23cc17c49c139e11e7180248381017] Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
git bisect bad e30de3809c23cc17c49c139e11e7180248381017
# good: [56ca981eec373ae4779e3114a3807cc15ad230f9] Merge branch 'pm-cpufreq' into linux-next
git bisect good 56ca981eec373ae4779e3114a3807cc15ad230f9
# bad: [ed752cc25bbd8ee26498a91ac7a63bcf50ea16f3] Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
git bisect bad ed752cc25bbd8ee26498a91ac7a63bcf50ea16f3
# bad: [39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6] Merge branches 'acpi-x86' and 'acpi-apei' into linux-next
git bisect bad 39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6
# good: [c881e66eb84a4f944df317294eedf6b2b2882214] Merge branches 'pm-sleep' and 'pm-powercap' into linux-next
git bisect good c881e66eb84a4f944df317294eedf6b2b2882214
# good: [8f62ca9c338aae4f73e9ce0221c3d4668359ddd8] ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
git bisect good 8f62ca9c338aae4f73e9ce0221c3d4668359ddd8
# bad: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evged
git bisect bad 19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac
# first bad commit: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evged
Rafael J. Wysocki
maintainerQuoted 60 lines · Nathan Chancellor
Quoted 25 lines · Rafael J. Wysocki
Quoted 24 lines · Xiaofei Tan
Quoted 21 lines · Jonathan Cameron
Quoted 10 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Quoted 5 lines
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.Reviewed-by Jonathan Cameron <[email protected]>Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.Quoted 6 lines
Quoted 1 line
OK. thanks.
Applied as 6.14-rc material with a rewritten changelog and under a new
subject: "ACPI: HED: Always initialize before evged".Thanks!
For what it's worth, I just bisected a new error message that I see when booting several
x86_64distribution configurations in QEMU to this change in -next as commit19badc4e57c6("ACPI: HED: Always initialize before evged"):$ curl -LSso .config https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/raw/main/config$ make -skj"$(nproc)" ARCH=x86_64 CROSS_COMPILE=x86_64-linux- olddefconfig bzImage$ qemu-system-x86_64 \ -display none \ -nodefaults \ -M q35 \ -d unimp,guest_errors \ -append 'console=ttyS0 earlycon=uart8250,io,0x3f8' \ -kernel arch/x86/boot/bzImage \ -initrd rootfs.cpio \ -cpu host \ -enable-kvm \ -m 512m \ -smp 8 -serial mon:stdio ... [ 0.535126] Error: Driver 'hardware_error_device' is already registered, aborting... ...
Quoted 4 lines
If there is any additional information I can provide or patches I can test, I am more than happy to do so. Apologies if this has already been reported or resolved, I did a search on the mailing list and I did not see anything.
No, it hasn't.
So AFAICS the commit in question needs to do more to switch over hed to non-modular.
I'll drop it for now, thanks!
Hi Nathan,
Quoted 39 lines · Nathan Chancellor
Quoted 21 lines · Rafael J. Wysocki
Quoted 20 lines · Xiaofei Tan
Quoted 18 lines · Jonathan Cameron
Quoted 15 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.Reviewed-by Jonathan Cameron <[email protected]>Quoted 8 lines
Quoted 4 lines
Quoted 3 lines
Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.OK. thanks.
Applied as 6.14-rc material with a rewritten changelog and under a new
subject: "ACPI: HED: Always initialize before evged".Thanks!
For what it's worth, I just bisected a new error message that I see when booting several
x86_64distribution configurations in QEMU to this change in -next as commit19badc4e57c6("ACPI: HED: Always initialize before evged"):$ curl -LSso .config https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/raw/main/config$ make -skj"$(nproc)" ARCH=x86_64 CROSS_COMPILE=x86_64-linux- olddefconfig bzImage
Quoted 15 lines
$ qemu-system-x86_64 \
-display none \
-nodefaults \
-M q35 \
-d unimp,guest_errors \
-append 'console=ttyS0 earlycon=uart8250,io,0x3f8' \
-kernel arch/x86/boot/bzImage \
-initrd rootfs.cpio \
-cpu host \
-enable-kvm \
-m 512m \
-smp 8
-serial mon:stdio
...
[ 0.535126] Error: Driver 'hardware_error_device' is already registered, aborting...It seems that the startup script of the test case loads some fixed ko, even when the bzImage changed.
If so, we could update the rootfs.cpio. This may introduce some adaptation work, if you want to roll
this patch to some distribution. I think we could do this when release new iso.
Quoted 40 lines
...If there is any additional information I can provide or patches I can test, I am more than happy to do so. Apologies if this has already been reported or resolved, I did a search on the mailing list and I did not see anything.
Cheers,
Nathan# bad: [
9a87ce288fe30f268b3a598422fe76af9bb2c2d2] Add linux-next specific files for 20250128
# good: [805ba04cb7ccfc7d72e834ebd796e043142156ba] Merge tag 'mips_6.14' ofgit://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
git bisect start '9a87ce288fe30f268b3a598422fe76af9bb2c2d2' '805ba04cb7ccfc7d72e834ebd796e043142156ba'
# bad: [e317bfe93c72e10dc02caac8b8b4b064291c352e] Merge branch 'next' ofgit://git.kernel.org/pub/scm/virt/kvm/kvm.git
git bisect bade317bfe93c72e10dc02caac8b8b4b064291c352e
# good: [31d2d7cb6ca6c6159e22bf708c089b7af11f1585] Merge branch 'next' ofgit://git.kernel.org/pub/scm/linux/kernel/git/uml/linux.git
git bisect good31d2d7cb6ca6c6159e22bf708c089b7af11f1585
# good: [bd19f1e807f92f27654e0bb2790fe31b6af58daf] Merge branch 'docs-next' ofgit://git.lwn.net/linux.git
git bisect goodbd19f1e807f92f27654e0bb2790fe31b6af58daf
# bad: [1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79] Merge branch 'for-next' ofgit://git.kernel.dk/linux-block.git
git bisect bad1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79
# bad: [f572a6cf38985ca5d4df4cae1e3e74464774d033] Merge branch 'drm-next' of https://gitlab.freedesktop.org/drm/kernel.git
git bisect badf572a6cf38985ca5d4df4cae1e3e74464774d033
# bad: [e30de3809c23cc17c49c139e11e7180248381017] Merge branch 'master' ofgit://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
git bisect bade30de3809c23cc17c49c139e11e7180248381017
# good: [56ca981eec373ae4779e3114a3807cc15ad230f9] Merge branch 'pm-cpufreq' into linux-next
git bisect good56ca981eec373ae4779e3114a3807cc15ad230f9
# bad: [ed752cc25bbd8ee26498a91ac7a63bcf50ea16f3] Merge branch 'cpufreq/arm/linux-next' ofgit://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
git bisect baded752cc25bbd8ee26498a91ac7a63bcf50ea16f3
# bad: [39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6] Merge branches 'acpi-x86' and 'acpi-apei' into linux-next
git bisect bad39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6
# good: [c881e66eb84a4f944df317294eedf6b2b2882214] Merge branches 'pm-sleep' and 'pm-powercap' into linux-next
git bisect goodc881e66eb84a4f944df317294eedf6b2b2882214
# good: [8f62ca9c338aae4f73e9ce0221c3d4668359ddd8] ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
git bisect good8f62ca9c338aae4f73e9ce0221c3d4668359ddd8
# bad: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evged
git bisect bad19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac# first bad commit: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evged.
Hi Xiaofei,
Quoted 56 lines · Xiaofei Tan
Quoted 39 lines · Nathan Chancellor
Quoted 21 lines · Rafael J. Wysocki
Quoted 20 lines · Xiaofei Tan
Quoted 18 lines · Jonathan Cameron
Quoted 15 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.Reviewed-by Jonathan Cameron <[email protected]>Quoted 8 lines
Quoted 4 lines
Quoted 3 lines
Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.OK. thanks.
Applied as 6.14-rc material with a rewritten changelog and under a new
subject: "ACPI: HED: Always initialize before evged".Thanks!
For what it's worth, I just bisected a new error message that I see when booting several
x86_64distribution configurations in QEMU to this change in -next as commit19badc4e57c6("ACPI: HED: Always initialize before evged"):$ curl -LSso .config https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/raw/main/config$ make -skj"$(nproc)" ARCH=x86_64 CROSS_COMPILE=x86_64-linux- olddefconfig bzImageQuoted 15 lines
$ qemu-system-x86_64 \ -display none \ -nodefaults \ -M q35 \ -d unimp,guest_errors \ -append 'console=ttyS0 earlycon=uart8250,io,0x3f8' \ -kernel arch/x86/boot/bzImage \ -initrd rootfs.cpio \ -cpu host \ -enable-kvm \ -m 512m \ -smp 8 -serial mon:stdio ... [ 0.535126] Error: Driver 'hardware_error_device' is already registered, aborting...
Quoted 5 lines
It seems that the startup script of the test case loads some fixed ko, even when the bzImage changed.
If so, we could update the rootfs.cpio. This may introduce some adaptation work, if you want to roll
this patch to some distribution. I think we could do this when release new iso.
I am confused, this issue is technically reproducible without a rootfs? Removing the '-initrd rootfs.cpio' from the QEMU command I provided above does not hide the error.
Quoted 38 lines
Quoted 38 lines
If there is any additional information I can provide or patches I can test, I am more than happy to do so. Apologies if this has already been reported or resolved, I did a search on the mailing list and I did not see anything.
Cheers,
Nathan# bad: [
9a87ce288fe30f268b3a598422fe76af9bb2c2d2] Add linux-next specific files for 20250128
# good: [805ba04cb7ccfc7d72e834ebd796e043142156ba] Merge tag 'mips_6.14' ofgit://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
git bisect start '9a87ce288fe30f268b3a598422fe76af9bb2c2d2' '805ba04cb7ccfc7d72e834ebd796e043142156ba'
# bad: [e317bfe93c72e10dc02caac8b8b4b064291c352e] Merge branch 'next' ofgit://git.kernel.org/pub/scm/virt/kvm/kvm.git
git bisect bade317bfe93c72e10dc02caac8b8b4b064291c352e
# good: [31d2d7cb6ca6c6159e22bf708c089b7af11f1585] Merge branch 'next' ofgit://git.kernel.org/pub/scm/linux/kernel/git/uml/linux.git
git bisect good31d2d7cb6ca6c6159e22bf708c089b7af11f1585
# good: [bd19f1e807f92f27654e0bb2790fe31b6af58daf] Merge branch 'docs-next' ofgit://git.lwn.net/linux.git
git bisect goodbd19f1e807f92f27654e0bb2790fe31b6af58daf
# bad: [1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79] Merge branch 'for-next' ofgit://git.kernel.dk/linux-block.git
git bisect bad1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79
# bad: [f572a6cf38985ca5d4df4cae1e3e74464774d033] Merge branch 'drm-next' of https://gitlab.freedesktop.org/drm/kernel.git
git bisect badf572a6cf38985ca5d4df4cae1e3e74464774d033
# bad: [e30de3809c23cc17c49c139e11e7180248381017] Merge branch 'master' ofgit://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
git bisect bade30de3809c23cc17c49c139e11e7180248381017
# good: [56ca981eec373ae4779e3114a3807cc15ad230f9] Merge branch 'pm-cpufreq' into linux-next
git bisect good56ca981eec373ae4779e3114a3807cc15ad230f9
# bad: [ed752cc25bbd8ee26498a91ac7a63bcf50ea16f3] Merge branch 'cpufreq/arm/linux-next' ofgit://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
git bisect baded752cc25bbd8ee26498a91ac7a63bcf50ea16f3
# bad: [39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6] Merge branches 'acpi-x86' and 'acpi-apei' into linux-next
git bisect bad39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6
# good: [c881e66eb84a4f944df317294eedf6b2b2882214] Merge branches 'pm-sleep' and 'pm-powercap' into linux-next
git bisect goodc881e66eb84a4f944df317294eedf6b2b2882214
# good: [8f62ca9c338aae4f73e9ce0221c3d4668359ddd8] ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
git bisect good8f62ca9c338aae4f73e9ce0221c3d4668359ddd8
# bad: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evged
git bisect bad19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac# first bad commit: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evged.
Quoted 57 lines · Nathan Chancellor
Hi Xiaofei,
Quoted 54 lines · Xiaofei Tan
Quoted 53 lines · Nathan Chancellor
Quoted 20 lines · Rafael J. Wysocki
Quoted 19 lines · Xiaofei Tan
Quoted 18 lines · Jonathan Cameron
Quoted 15 lines · On Fri, 17 Jan 2025 10:29:57 +0800 Xiaofei Tan <[email protected]> wrote:
When the module HED is built-in, the module HED init is behind EVGED as the driver are in the same initcall level, then the order is determined by
Makefileorder. That order violates expectations. Because RAS records can't be handled in the special time window that EVGED has initialized while HED not.If the number of such RAS records is more than the APEI HEST error source number, the HEST resources could be occupied all, and then could affect subsequent RAS error reporting.
Change the initcall level of HED to
subsys_initto fix the issue. If build HED as a module, the problem remains. To solve this problem completely, change theACPI_HEDfrom tristate to bool.Reviewed-by Jonathan Cameron <[email protected]>Quoted 8 lines
Quoted 4 lines
Quoted 3 lines
Given the change in approach (even though I reviewed this internally)
should probably have dropped my RB. Anyhow, consider this me
giving it again on list.OK. thanks.
Applied as 6.14-rc material with a rewritten changelog and under a new
subject: "ACPI: HED: Always initialize before evged".Thanks!
For what it's worth, I just bisected a new error message that I see when booting several
x86_64distribution configurations in QEMU to this change in -next as commit19badc4e57c6("ACPI: HED: Always initialize before evged"):$ curl -LSso .config https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/raw/main/config$ make -skj"$(nproc)" ARCH=x86_64 CROSS_COMPILE=x86_64-linux- olddefconfig bzImage$ qemu-system-x86_64 \ -display none \ -nodefaults \ -M q35 \ -d unimp,guest_errors \ -append 'console=ttyS0 earlycon=uart8250,io,0x3f8' \ -kernel arch/x86/boot/bzImage \ -initrd rootfs.cpio \ -cpu host \ -enable-kvm \ -m 512m \ -smp 8 -serial mon:stdio ... [ 0.535126] Error: Driver 'hardware_error_device' is already registered, aborting...
Quoted 8 lines
Quoted 5 lines
It seems that the startup script of the test case loads some fixed ko, even when the bzImage changed.
If so, we could update the rootfs.cpio. This may introduce some adaptation work, if you want to roll
this patch to some distribution. I think we could do this when release new iso.
I am confused, this issue is technically reproducible without a rootfs? Removing the '-initrd rootfs.cpio' from the QEMU command I provided above does not hide the error.
Hi Nathan, I have reproduced this issue, and nothing to do with rootfs.cpio, thanks for this info.
Quoted 40 lines
Quoted 38 lines
Quoted 38 lines
If there is any additional information I can provide or patches I can test, I am more than happy to do so. Apologies if this has already been reported or resolved, I did a search on the mailing list and I did not see anything.
Cheers,
Nathan# bad: [
9a87ce288fe30f268b3a598422fe76af9bb2c2d2] Add linux-next specific files for 20250128
# good: [805ba04cb7ccfc7d72e834ebd796e043142156ba] Merge tag 'mips_6.14' ofgit://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
git bisect start '9a87ce288fe30f268b3a598422fe76af9bb2c2d2' '805ba04cb7ccfc7d72e834ebd796e043142156ba'
# bad: [e317bfe93c72e10dc02caac8b8b4b064291c352e] Merge branch 'next' ofgit://git.kernel.org/pub/scm/virt/kvm/kvm.git
git bisect bade317bfe93c72e10dc02caac8b8b4b064291c352e
# good: [31d2d7cb6ca6c6159e22bf708c089b7af11f1585] Merge branch 'next' ofgit://git.kernel.org/pub/scm/linux/kernel/git/uml/linux.git
git bisect good31d2d7cb6ca6c6159e22bf708c089b7af11f1585
# good: [bd19f1e807f92f27654e0bb2790fe31b6af58daf] Merge branch 'docs-next' ofgit://git.lwn.net/linux.git
git bisect goodbd19f1e807f92f27654e0bb2790fe31b6af58daf
# bad: [1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79] Merge branch 'for-next' ofgit://git.kernel.dk/linux-block.git
git bisect bad1df2cdd95b5ca1e2d520e3df2b2b1a12bd31cb79
# bad: [f572a6cf38985ca5d4df4cae1e3e74464774d033] Merge branch 'drm-next' of https://gitlab.freedesktop.org/drm/kernel.git
git bisect badf572a6cf38985ca5d4df4cae1e3e74464774d033
# bad: [e30de3809c23cc17c49c139e11e7180248381017] Merge branch 'master' ofgit://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
git bisect bade30de3809c23cc17c49c139e11e7180248381017
# good: [56ca981eec373ae4779e3114a3807cc15ad230f9] Merge branch 'pm-cpufreq' into linux-next
git bisect good56ca981eec373ae4779e3114a3807cc15ad230f9
# bad: [ed752cc25bbd8ee26498a91ac7a63bcf50ea16f3] Merge branch 'cpufreq/arm/linux-next' ofgit://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
git bisect baded752cc25bbd8ee26498a91ac7a63bcf50ea16f3
# bad: [39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6] Merge branches 'acpi-x86' and 'acpi-apei' into linux-next
git bisect bad39b6b3b09b32c7b4ed6b0e8e87f359c588fe19d6
# good: [c881e66eb84a4f944df317294eedf6b2b2882214] Merge branches 'pm-sleep' and 'pm-powercap' into linux-next
git bisect goodc881e66eb84a4f944df317294eedf6b2b2882214
# good: [8f62ca9c338aae4f73e9ce0221c3d4668359ddd8] ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
git bisect good8f62ca9c338aae4f73e9ce0221c3d4668359ddd8
# bad: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evged
git bisect bad19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac# first bad commit: [19badc4e57c6a5b87d3ce6eb6ec24bed62ec57ac] ACPI: HED: Always initialize before evgedQuoted 1 line
Quoted 1 line
.
.