Skip to contentSkip to conversation

mkfs: use a default sector size that is also suitable for the rtdev

PATCH In review Christoph Hellwig 2 participants 2 messages Jan 27, 2025

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mkfs: use a default sector size that is also suitable for the rtdev

When creating a filesytem where the data device has a sector size smalle than that of the RT device without further options, mkfs currently fails with:

mkfs.xfs: error - cannot set blocksize 512 on block device $RTDEV: Invalid argument

This is because XFS sets the sector size based on logical block size of the data device, but not that of the RT device. Change the code so that is uses the larger of the two values.

---
 mkfs/xfs_mkfs.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
mkfs/xfs_mkfs.c +14 -2
index 6cc7e6439ca1..0627af81da37 100644
@@ -2368,7 +2368,9 @@ validate_sectorsize(
 		 * advertised sector size of the device.  We use the physical
 		 * sector size unless the requested block size is smaller
 		 * than that, then we can use logical, but warn about the
-		 * inefficiency.
+		 * inefficiency.  If the file system has a RT device, the
+		 * sectorsize needs to be the maximum of the data and RT
+		 * device.
 		 *
 		 * Some architectures have a page size > XFS_MAX_SECTORSIZE.
 		 * In that case, a ramdisk or persistent memory device may
@@ -2378,8 +2380,18 @@ validate_sectorsize(
 			ft->data.physical_sector_size =
 				ft->data.logical_sector_size;
 		}
-
 		cfg->sectorsize = ft->data.physical_sector_size;
+
+		if (cli->xi->rt.name) {
+			if (ft->rt.physical_sector_size > XFS_MAX_SECTORSIZE) {
+				ft->rt.physical_sector_size =
+					ft->rt.logical_sector_size;
+			}
+
+			if (cfg->sectorsize < ft->rt.physical_sector_size)
+				cfg->sectorsize = ft->rt.physical_sector_size;
+		}
+
 		if (cfg->blocksize < cfg->sectorsize &&
 		    cfg->blocksize >= ft->data.logical_sector_size) {
 			fprintf(stderr,
Signature · 1 line
2.45.2
Reviewed-by on v1 1/1
#1 lore raw
Quoted 11 lines · Christoph Hellwig

When creating a filesytem where the data device has a sector size smalle than that of the RT device without further options, mkfs currently fails with:

mkfs.xfs: error - cannot set blocksize 512 on block device $RTDEV: Invalid argument

This is because XFS sets the sector size based on logical block size of the data device, but not that of the RT device. Change the code so that is uses the larger of the two values.

That makes sense to me.

--D

Quoted 43 lines
---
 mkfs/xfs_mkfs.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
mkfs/xfs_mkfs.c +14 -2
index 6cc7e6439ca1..0627af81da37 100644
@@ -2368,7 +2368,9 @@ validate_sectorsize(
 		 * advertised sector size of the device.  We use the physical
 		 * sector size unless the requested block size is smaller
 		 * than that, then we can use logical, but warn about the
-		 * inefficiency.
+		 * inefficiency.  If the file system has a RT device, the
+		 * sectorsize needs to be the maximum of the data and RT
+		 * device.
 		 *
 		 * Some architectures have a page size > XFS_MAX_SECTORSIZE.
 		 * In that case, a ramdisk or persistent memory device may
@@ -2378,8 +2380,18 @@ validate_sectorsize(
 			ft->data.physical_sector_size =
 				ft->data.logical_sector_size;
 		}
-
 		cfg->sectorsize = ft->data.physical_sector_size;
+
+		if (cli->xi->rt.name) {
+			if (ft->rt.physical_sector_size > XFS_MAX_SECTORSIZE) {
+				ft->rt.physical_sector_size =
+					ft->rt.logical_sector_size;
+			}
+
+			if (cfg->sectorsize < ft->rt.physical_sector_size)
+				cfg->sectorsize = ft->rt.physical_sector_size;
+		}
+
 		if (cfg->blocksize < cfg->sectorsize &&
 		    cfg->blocksize >= ft->data.logical_sector_size) {
 			fprintf(stderr,
Signature · 1 line
2.45.2