FAILED: patch "[PATCH] PCI: Restore original INTX_DISABLE bit by pcim_intx()" failed to apply to 6.12-stable tree

The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x d555ed45a5a10a813528c7685f432369d536ae3d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025021022-broadness-afflicted-47d6@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From d555ed45a5a10a813528c7685f432369d536ae3d Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Thu, 31 Oct 2024 14:42:56 +0100
Subject: [PATCH] PCI: Restore original INTX_DISABLE bit by pcim_intx()

pcim_intx() tries to restore the INTx bit at removal via devres, but there is a chance that it restores a wrong value.

Because the value to be restored is blindly assumed to be the negative of the enable argument, when a driver calls pcim_intx() unnecessarily for the already enabled state, it'll restore to the disabled state in turn. That is, the function assumes the case like:

// INTx == 1
pcim_intx(pdev, 0); // old INTx value assumed to be 1 -> correct

but it might be like the following, too:

// INTx == 0
pcim_intx(pdev, 0); // old INTx value assumed to be 1 -> wrong

Also, when a driver calls pcim_intx() multiple times with different enable argument values, the last one will win no matter what value it is. This can lead to inconsistency, e.g.

// INTx == 1
pcim_intx(pdev, 0); // OK
...
pcim_intx(pdev, 1); // now old INTx wrongly assumed to be 0

This patch addresses those inconsistencies by saving the original INTx state at the first pcim_intx() call. For that, get_or_create_intx_devres() is folded into pcim_intx() caller side; it allows us to simply check the already allocated devres and record the original INTx along with the devres_alloc() call.

index d1d97a4bb36d..3431a7df3e0d 100644
@@ -419,19 +419,12 @@ static void pcim_intx_restore(struct device *dev, void *data)
 	pci_intx(pdev, res->orig_intx);
 }
 
-static struct pcim_intx_devres *get_or_create_intx_devres(struct device *dev)
+static void save_orig_intx(struct pci_dev *pdev, struct pcim_intx_devres *res)
 {
-	struct pcim_intx_devres *res;
+	u16 pci_command;
 
-	res = devres_find(dev, pcim_intx_restore, NULL, NULL);
-	if (res)
-		return res;
-
-	res = devres_alloc(pcim_intx_restore, sizeof(*res), GFP_KERNEL);
-	if (res)
-		devres_add(dev, res);
-
-	return res;
+	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+	res->orig_intx = !(pci_command & PCI_COMMAND_INTX_DISABLE);
 }
 
 /**

@@ -447,12 +440,23 @@ static struct pcim_intx_devres *get_or_create_intx_devres(struct device *dev)
 int pcim_intx(struct pci_dev *pdev, int enable)
 {
 	struct pcim_intx_devres *res;
+	struct device *dev = &pdev->dev;
 
-	res = get_or_create_intx_devres(&pdev->dev);
-	if (!res)
-		return -ENOMEM;
+	/*
+	 * pcim_intx() must only restore the INTx value that existed before the
+	 * driver was loaded, i.e., before it called pcim_intx() for the
+	 * first time.
+	 */
+	res = devres_find(dev, pcim_intx_restore, NULL, NULL);
+	if (!res) {
+		res = devres_alloc(pcim_intx_restore, sizeof(*res), GFP_KERNEL);
+		if (!res)
+			return -ENOMEM;
+
+		save_orig_intx(pdev, res);
+		devres_add(dev, res);
+	}
 
-	res->orig_intx = !enable;
 	pci_intx(pdev, enable);
 
 	return 0;