scsi: hpsa: Use min() to simplify code
Subsystems (2)
PATCH 1/1 scsi: hpsa: Use min() to simplify code
Use min() to simplify the host_store_hp_ssd_smart_path_status() and host_store_raid_offload_debug() functions.
--- drivers/scsi/hpsa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/hpsa.c +2 -2
@@ -460,7 +460,7 @@ static ssize_t host_store_hp_ssd_smart_path_status(struct device *dev,if (!capable (CAP_SYS_ADMIN ) || !capable (CAP_SYS_RAWIO ))return -EACCES ; - len = count >sizeof (tmpbuf) -1 ?sizeof (tmpbuf) -1 : count; + len =min (count,sizeof (tmpbuf) -1 );strncpy (tmpbuf, buf, len); tmpbuf[len] ='\0' ;if (sscanf (tmpbuf,"%d" , &status) !=1 )
@@ -484,7 +484,7 @@ static ssize_t host_store_raid_offload_debug(struct device *dev,if (!capable (CAP_SYS_ADMIN ) || !capable (CAP_SYS_RAWIO ))return -EACCES ; - len = count >sizeof (tmpbuf) -1 ?sizeof (tmpbuf) -1 : count; + len =min (count,sizeof (tmpbuf) -1 );strncpy (tmpbuf, buf, len); tmpbuf[len] ='\0' ;if (sscanf (tmpbuf,"%d" , &debug_level) !=1 )
Signature · 1 line
2.48.1
Quoted 22 lines · Thorsten Blum
Use
min()to simplify thehost_store_hp_ssd_smart_path_status()andhost_store_raid_offload_debug()functions.Signed-off-by Thorsten Blum <[email protected]>--- drivers/scsi/hpsa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/scsi/hpsa.c +1
-1@@ -460,7 +460,7 @@ static ssize_t host_store_hp_ssd_smart_path_status(struct device *dev,if (!capable (CAP_SYS_ADMIN ) || !capable (CAP_SYS_RAWIO ))return -EACCES ; - len = count >sizeof (tmpbuf) -1 ?sizeof (tmpbuf) -1 : count; + len =min (count,sizeof (tmpbuf) -1 );strncpy (tmpbuf, buf, len); tmpbuf[len] ='\0' ;if (sscanf (tmpbuf,"%d" , &status) !=1 )
drivers/scsi/hpsa.c static ssize_t host_store_raid_offload_debug(struct device *dev, · line 490
Quoted 8 lines
drivers/scsi/hpsa.c +1
-1@@ -484,7 +484,7 @@ static ssize_t host_store_raid_offload_debug(struct device *dev,if (!capable (CAP_SYS_ADMIN ) || !capable (CAP_SYS_RAWIO ))return -EACCES ; - len = count >sizeof (tmpbuf) -1 ?sizeof (tmpbuf) -1 : count; + len =min (count,sizeof (tmpbuf) -1 );strncpy (tmpbuf, buf, len); tmpbuf[len] ='\0' ;if (sscanf (tmpbuf,"%d" , &debug_level) !=1 )
From Documentation/process/deprecated.rst:
<quote>strncpy() on NUL-terminated strings
-----------------------------------
Use of strncpy() does not guarantee that the destination buffer will be NUL terminated. This can lead to various linear read overflows and other misbehavior due to the missing termination. It also NUL-pads the destination buffer if the source contents are shorter than the destination buffer size, which may be a needless performance penalty for callers using only NUL-terminated strings.
When the destination is required to be NUL-terminated, the replacement is strscpy(), though care must be given to any cases where the return value of strncpy() was used, since strscpy() does not return a pointer to the destination, but rather a count of non-NUL bytes copied (or negative errno when it truncates). Any cases still needing NUL-padding should instead use strscpy_pad().
If a caller is using non-NUL-terminated strings, strtomem() should be used, and the destinations should be marked with the `__nonstring
<https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
attribute to avoid future compiler warnings. For cases still needing NUL-padding, strtomem_pad() can be used.
</quote>
Instead of only changing the calculation of 'len', please change the strncpy() calls into strscpy() calls.
Thanks,
Bart.
Quoted 32 lines · Bart Van Assche
Quoted 4 lines · Thorsten Blum
Use
min()to simplify thehost_store_hp_ssd_smart_path_status()andhost_store_raid_offload_debug()functions.Signed-off-by Thorsten Blum <[email protected]>---
From
Documentation/process/deprecated.rst:<quote>
strncpy()on NUL-terminated strings
-----------------------------------
Use ofstrncpy()does not guarantee that the destination buffer will be NUL terminated. This can lead to various linear read overflows and other misbehavior due to the missing termination. It also NUL-pads the destination buffer if the source contents are shorter than the destination buffer size, which may be a needless performance penalty for callers using only NUL-terminated strings.When the destination is required to be NUL-terminated, the replacement is
strscpy(), though care must be given to any cases where the return value ofstrncpy()was used, sincestrscpy()does not return a pointer to the destination, but rather a count of non-NUL bytes copied (or negative errno when it truncates). Any cases still needing NUL-padding should instead usestrscpy_pad().If a caller is using non-NUL-terminated strings,
strtomem()should be used, and the destinations should be marked with the `__nonstring
<https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
attribute to avoid future compiler warnings. For cases still needing NUL-padding,strtomem_pad()can be used.
</quote>
Quoted 2 lines
Instead of only changing the calculation of 'len', please change the
strncpy()calls intostrscpy()calls.
Thank you for the suggestion.
I just sent a new patch [1] essentially replacing this one.
Best,
Thorsten