Skip to contentSkip to conversation

net-timestamp: bpf extension to equip applications transparently

PATCH Superseded Jason Xing 3 participants 40 messages Feb 14, 2025 – Feb 18, 2025

Subsystems (11)

v11 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Jason Xing

author
#0 lore raw

v11 cover net-timestamp: bpf extension to equip applications transparently

"Timestamping is key to debugging network stack latency. With SO_TIMESTAMPING, bugs that are otherwise incorrectly assumed to be network issues can be attributed to the kernel." This is extracted from the talk "SO_TIMESTAMPING: Powering Fleetwide RPC Monitoring" addressed by Willem de Bruijn at netdevconf 0x17).

There are a few areas that need optimization with the consideration of easier use and less performance impact, which I highlighted and mainly discussed at netconf 2024 with Willem de Bruijn and John Fastabend:
uAPI compatibility, extra system call overhead, and the need for application modification. I initially managed to solve these issues by writing a kernel module that hooks various key functions. However, this approach is not suitable for the next kernel release. Therefore, a BPF extension was proposed. During recent period, Martin KaFai Lau provides invaluable suggestions about BPF along the way. Many thanks here!

This series adds the BPF networking timestamping infrastructure through reusing most of the tx timestamping callback that is currently enabled by the SO_TIMESTAMPING.. This series also adds TX timestamping support for TCP. The RX timestamping and UDP support will be added in the future.

---
v10

1. rename hwts with hwtimestamp
2. use subtest and pid filter in selftest
3. use 'tcb->txstamp_ack |= TSTAMP_ACK_SK'

v9

1. set the hwtstamp to skb when the skb enters into the hw SND case
2. fix co-existence problem in patch 9 and add corresponding check in patch 12.
3. refine some commit messages and titles

v8

1. adjust some commit messages and titles
2. add sk cookie in selftests
3. handle the NULL pointer in hwstamp
4. use kfunc to do selective sampling

v7

1. target bpf-next tree
2. simplely and directly stop timestamping callbacks calling a few BPF CALLS due to safety concern.
3. add more new testcases and adjust the existing testcases
4. revise some comments of new timestamping callbacks
5. remove a few BPF CGROUP locks

RFC v6
In the meantime, any suggestions and reviews are welcome!

1. handle those safety problem by using the correct method.
2. support bpf_getsockopt.
3. adjust the position of BPF_SOCK_OPS_TS_TCP_SND_CB
4. fix mishandling the hardware timestamp error
5. add more corresponding tests

v5

1. handle the safety issus when someone tries to call unrelated bpf helpers.
2. avoid adding direct function call in the hot path like __dev_queue_xmit()
3. remove reporting the hardware timestamp and tskey since they can be fetched through the existing helper with the help of bpf_skops_init_skb(), please see the selftest.
4. add new sendmsg callback in tcp_sendmsg, and introduce tskey_bpf used by bpf program to correlate tcp_sendmsg with other hook points in patch [13/15].

v4

1. introduce sk->sk_bpf_cb_flags to let user use bpf_setsockopt() (Martin)
2. introduce SKBTX_BPF to enable the bpf SO_TIMESTAMPING feature (Martin)
3. introduce bpf map in tests (Martin)
4. I choose to make this series as simple as possible, so I only support most cases in the tx path for TCP protocol.

v3

1. support UDP proto by introducing a new generation point.
2. for OPT_ID, introducing sk_tskey_bpf_offset to compute the delta between the current socket key and bpf socket key. It is desiged for UDP, which also applies to TCP.
3. support bpf_getsockopt()
4. use cgroup static key instead.
5. add one simple bpf selftest to show how it can be used.
6. remove the rx support from v2 because the number of patches could exceed the limit of one series.

V2

1. Introduce tsflag requestors so that we are able to extend more in the future. Besides, it enables TX flags for bpf extension feature separately without breaking users. It is suggested by Vadim Fedorenko.
2. introduce a static key to control the whole feature. (Willem)
3. Open the gate of bpf_setsockopt for the SO_TIMESTAMPING feature in some TX/RX cases, not all the cases.

Jason Xing (12):
bpf: add networking timestamping support to bpf_get/setsockopt()
bpf: prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: prevent unsafe access to the sock fields in the BPF timestamping
callback
bpf: disable unsafe helpers in TX timestamping callbacks
net-timestamp: prepare for isolating two modes of SO_TIMESTAMPING
bpf: add BPF_SOCK_OPS_TS_SCHED_OPT_CB callback
bpf: add BPF_SOCK_OPS_TS_SW_OPT_CB callback
bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback
bpf: add BPF_SOCK_OPS_TS_ACK_OPT_CB callback
bpf: add BPF_SOCK_OPS_TS_SND_CB callback
bpf: support selective sampling for bpf timestamping selftests/bpf: add simple bpf tests in the tx path for timestamping
feature

 include/linux/filter.h                        |   1 +
 include/linux/skbuff.h                        |  12 +-
 include/net/sock.h                            |  10 +
 include/net/tcp.h                             |   7 +-
 include/uapi/linux/bpf.h                      |  30 +++
 kernel/bpf/btf.c                              |   1 +
 net/core/dev.c                                |   3 +-
 net/core/filter.c                             |  81 +++++-
 net/core/skbuff.c                             |  53 ++++
 net/core/sock.c                               |  14 +
 net/dsa/user.c                                |   2 +-
 net/ipv4/tcp.c                                |   6 +-
 net/ipv4/tcp_input.c                          |   2 +
 net/ipv4/tcp_output.c                         |   2 +
 net/socket.c                                  |   2 +-
 tools/include/uapi/linux/bpf.h                |  23 ++
 .../bpf/prog_tests/net_timestamping.c         | 239 +++++++++++++++++
 .../selftests/bpf/progs/net_timestamping.c    | 248 ++++++++++++++++++
 18 files changed, 722 insertions(+), 14 deletions(-)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/net_timestamping.c
 create mode 100644 tools/testing/selftests/bpf/progs/net_timestamping.c
Signature · 1 line
2.43.5
author
#1 lore raw

PATCH v11 1/12 bpf: add networking timestamping support to bpf_get/setsockopt()

The new SK_BPF_CB_FLAGS and new SK_BPF_CB_TX_TIMESTAMPING are added to bpf_get/setsockopt. The later patches will implement the BPF networking timestamping. The BPF program will use bpf_setsockopt(SK_BPF_CB_FLAGS, SK_BPF_CB_TX_TIMESTAMPING) to enable the BPF networking timestamping on a socket.

---
 include/net/sock.h             |  3 +++
 include/uapi/linux/bpf.h       |  8 ++++++++
 net/core/filter.c              | 23 +++++++++++++++++++++++
 tools/include/uapi/linux/bpf.h |  1 +
 4 files changed, 35 insertions(+)
include/net/sock.h +3 -0
index 8036b3b79cd8..7916982343c6 100644
@@ -303,6 +303,7 @@ struct sk_filter;
   *	@sk_stamp: time stamp of last packet received
   *	@sk_stamp_seq: lock for accessing sk_stamp on 32 bit architectures only
   *	@sk_tsflags: SO_TIMESTAMPING flags
+  *	@sk_bpf_cb_flags: used in bpf_setsockopt()
   *	@sk_use_task_frag: allow sk_page_frag() to use current->task_frag.
   *			   Sockets that can be used under memory reclaim should
   *			   set this to false.
@@ -445,6 +446,8 @@ struct sock {
 	u32			sk_reserved_mem;
 	int			sk_forward_alloc;
 	u32			sk_tsflags;
+#define SK_BPF_CB_FLAG_TEST(SK, FLAG) ((SK)->sk_bpf_cb_flags & (FLAG))
+	u32			sk_bpf_cb_flags;
 	__cacheline_group_end(sock_write_rxtx);
 
 	__cacheline_group_begin(sock_write_tx);
include/uapi/linux/bpf.h +8 -0
index fff6cdb8d11a..fa666d51dffe 100644
@@ -6916,6 +6916,13 @@ enum {
 	BPF_SOCK_OPS_ALL_CB_FLAGS       = 0x7F,
 };
 
+/* Definitions for bpf_sk_cb_flags */
+enum {
+	SK_BPF_CB_TX_TIMESTAMPING	= 1<<0,
+	SK_BPF_CB_MASK			= (SK_BPF_CB_TX_TIMESTAMPING - 1) |
+					   SK_BPF_CB_TX_TIMESTAMPING
+};
+
 /* List of known BPF sock_ops operators.
  * New entries can only be added at the end
  */
@@ -7094,6 +7101,7 @@ enum {
 	TCP_BPF_SYN_IP		= 1006, /* Copy the IP[46] and TCP header */
 	TCP_BPF_SYN_MAC         = 1007, /* Copy the MAC, IP[46], and TCP header */
 	TCP_BPF_SOCK_OPS_CB_FLAGS = 1008, /* Get or Set TCP sock ops flags */
+	SK_BPF_CB_FLAGS		= 1009, /* Used to set socket bpf flags */
 };
 
 enum {
net/core/filter.c +23 -0
index 2ec162dd83c4..1c6c07507a78 100644
@@ -5222,6 +5222,25 @@ static const struct bpf_func_proto bpf_get_socket_uid_proto = {
 	.arg1_type      = ARG_PTR_TO_CTX,
 };
 
+static int sk_bpf_set_get_cb_flags(struct sock *sk, char *optval, bool getopt)
+{
+	u32 sk_bpf_cb_flags;
+
+	if (getopt) {
+		*(u32 *)optval = sk->sk_bpf_cb_flags;
+		return 0;
+	}
+
+	sk_bpf_cb_flags = *(u32 *)optval;
+
+	if (sk_bpf_cb_flags & ~SK_BPF_CB_MASK)
+		return -EINVAL;
+
+	sk->sk_bpf_cb_flags = sk_bpf_cb_flags;
+
+	return 0;
+}
+
 static int sol_socket_sockopt(struct sock *sk, int optname,
 			      char *optval, int *optlen,
 			      bool getopt)
@@ -5238,6 +5257,7 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
 	case SO_MAX_PACING_RATE:
 	case SO_BINDTOIFINDEX:
 	case SO_TXREHASH:
+	case SK_BPF_CB_FLAGS:
 		if (*optlen != sizeof(int))
 			return -EINVAL;
 		break;
@@ -5247,6 +5267,9 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
 		return -EINVAL;
 	}
 
+	if (optname == SK_BPF_CB_FLAGS)
+		return sk_bpf_set_get_cb_flags(sk, optval, getopt);
+
 	if (getopt) {
 		if (optname == SO_BINDTODEVICE)
 			return -EINVAL;
tools/include/uapi/linux/bpf.h +1 -0
index 2acf9b336371..70366f74ef4e 100644
@@ -7091,6 +7091,7 @@ enum {
 	TCP_BPF_SYN_IP		= 1006, /* Copy the IP[46] and TCP header */
 	TCP_BPF_SYN_MAC         = 1007, /* Copy the MAC, IP[46], and TCP header */
 	TCP_BPF_SOCK_OPS_CB_FLAGS = 1008, /* Get or Set TCP sock ops flags */
+	SK_BPF_CB_FLAGS		= 1009, /* Used to set socket bpf flags */
 };
 
 enum {
Signature · 1 line
2.43.5
author
#2 lore raw

PATCH v11 2/12 bpf: prepare the sock_ops ctx and call bpf prog for TX timestamping

In reply to Jason Xing

This patch introduces a new bpf_skops_tx_timestamping() function that prepares the "struct bpf_sock_ops" ctx and then executes the sockops BPF program.

The subsequent patch will utilize bpf_skops_tx_timestamping() at the existing TX timestamping kernel callbacks (__sk_tstamp_tx specifically) to call the sockops BPF program. Later, four callback points to report information to user space based on this patch will be introduced.

---
 include/net/sock.h |  7 +++++++
 net/core/sock.c    | 14 ++++++++++++++
 2 files changed, 21 insertions(+)
include/net/sock.h +7 -0
index 7916982343c6..6f4d54faba92 100644
@@ -2923,6 +2923,13 @@ int sock_set_timestamping(struct sock *sk, int optname,
 			  struct so_timestamping timestamping);
 
 void sock_enable_timestamps(struct sock *sk);
+#if defined(CONFIG_CGROUP_BPF)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+#else
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+}
+#endif
 void sock_no_linger(struct sock *sk);
 void sock_set_keepalive(struct sock *sk);
 void sock_set_priority(struct sock *sk, u32 priority);
net/core/sock.c +14 -0
index eae2ae70a2e0..bde45569d4da 100644
@@ -948,6 +948,20 @@ int sock_set_timestamping(struct sock *sk, int optname,
 	return 0;
 }
 
+#if defined(CONFIG_CGROUP_BPF)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+	struct bpf_sock_ops_kern sock_ops;
+
+	memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
+	sock_ops.op = op;
+	sock_ops.is_fullsock = 1;
+	sock_ops.sk = sk;
+	bpf_skops_init_skb(&sock_ops, skb, 0);
+	__cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);
+}
+#endif
+
 void sock_set_keepalive(struct sock *sk)
 {
 	lock_sock(sk);
Signature · 1 line
2.43.5
author
#3 lore raw

PATCH v11 3/12 bpf: prevent unsafe access to the sock fields in the BPF timestamping callback

In reply to Jason Xing

The subsequent patch will implement BPF TX timestamping. It will call the sockops BPF program without holding the sock lock.

This breaks the current assumption that all sock ops programs will hold the sock lock. The sock's fields of the uapi's bpf_sock_ops requires this assumption.

To address this, a new "u8 is_locked_tcp_sock;" field is added. This patch sets it in the current sock_ops callbacks. The "is_fullsock" test is then replaced by the "is_locked_tcp_sock" test during sock_ops_convert_ctx_access().

The new TX timestamping callbacks added in the subsequent patch will not have this set. This will prevent unsafe access from the new timestamping callbacks.

Potentially, we could allow read-only access. However, this would require identifying which callback is read-safe-only and also requires additional BPF instruction rewrites in the covert_ctx. Since the BPF program can always read everything from a socket (e.g., by using bpf_core_cast), this patch keeps it simple and disables all read and write access to any socket fields through the bpf_sock_ops UAPI from the new TX timestamping callback.

Moreover, note that some of the fields in bpf_sock_ops are specific to tcp_sock, and sock_ops currently only supports tcp_sock. In the future, UDP timestamping will be added, which will also break this assumption. The same idea used in this patch will be reused. Considering that the current sock_ops only supports tcp_sock, the variable is named is_locked_"tcp"_sock.

---
 include/linux/filter.h | 1 +
 include/net/tcp.h      | 1 +
 net/core/filter.c      | 8 ++++----
 net/ipv4/tcp_input.c   | 2 ++
 net/ipv4/tcp_output.c  | 2 ++
 5 files changed, 10 insertions(+), 4 deletions(-)
include/linux/filter.h +1 -0
index a3ea46281595..d36d5d5180b1 100644
@@ -1508,6 +1508,7 @@ struct bpf_sock_ops_kern {
 	void	*skb_data_end;
 	u8	op;
 	u8	is_fullsock;
+	u8	is_locked_tcp_sock;
 	u8	remaining_opt_len;
 	u64	temp;			/* temp and everything after is not
 					 * initialized to 0 before calling
include/net/tcp.h +1 -0
index 5b2b04835688..4c4dca59352b 100644
@@ -2649,6 +2649,7 @@ static inline int tcp_call_bpf(struct sock *sk, int op, u32 nargs, u32 *args)
 	memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
 	if (sk_fullsock(sk)) {
 		sock_ops.is_fullsock = 1;
+		sock_ops.is_locked_tcp_sock = 1;
 		sock_owned_by_me(sk);
 	}
 
net/core/filter.c +4 -4
index 1c6c07507a78..8631036f6b64 100644
@@ -10381,10 +10381,10 @@ static u32 sock_ops_convert_ctx_access(enum bpf_access_type type,
 		}							      \
 		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(			      \
 						struct bpf_sock_ops_kern,     \
-						is_fullsock),		      \
+						is_locked_tcp_sock),	      \
 				      fullsock_reg, si->src_reg,	      \
 				      offsetof(struct bpf_sock_ops_kern,      \
-					       is_fullsock));		      \
+					       is_locked_tcp_sock));	      \
 		*insn++ = BPF_JMP_IMM(BPF_JEQ, fullsock_reg, 0, jmp);	      \
 		if (si->dst_reg == si->src_reg)				      \
 			*insn++ = BPF_LDX_MEM(BPF_DW, reg, si->src_reg,	      \
@@ -10469,10 +10469,10 @@ static u32 sock_ops_convert_ctx_access(enum bpf_access_type type,
 					       temp));			      \
 		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(			      \
 						struct bpf_sock_ops_kern,     \
-						is_fullsock),		      \
+						is_locked_tcp_sock),	      \
 				      reg, si->dst_reg,			      \
 				      offsetof(struct bpf_sock_ops_kern,      \
-					       is_fullsock));		      \
+					       is_locked_tcp_sock));	      \
 		*insn++ = BPF_JMP_IMM(BPF_JEQ, reg, 0, 2);		      \
 		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(			      \
 						struct bpf_sock_ops_kern, sk),\
net/ipv4/tcp_input.c +2 -0
index eb82e01da911..95733dcdfb4b 100644
@@ -169,6 +169,7 @@ static void bpf_skops_parse_hdr(struct sock *sk, struct sk_buff *skb)
 	memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
 	sock_ops.op = BPF_SOCK_OPS_PARSE_HDR_OPT_CB;
 	sock_ops.is_fullsock = 1;
+	sock_ops.is_locked_tcp_sock = 1;
 	sock_ops.sk = sk;
 	bpf_skops_init_skb(&sock_ops, skb, tcp_hdrlen(skb));
 
@@ -185,6 +186,7 @@ static void bpf_skops_established(struct sock *sk, int bpf_op,
 	memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
 	sock_ops.op = bpf_op;
 	sock_ops.is_fullsock = 1;
+	sock_ops.is_locked_tcp_sock = 1;
 	sock_ops.sk = sk;
 	/* sk with TCP_REPAIR_ON does not have skb in tcp_finish_connect */
 	if (skb)
net/ipv4/tcp_output.c +2 -0
index bc95d2a5924f..a0e779bdbc6b 100644
@@ -525,6 +525,7 @@ static void bpf_skops_hdr_opt_len(struct sock *sk, struct sk_buff *skb,
 		sock_owned_by_me(sk);
 
 		sock_ops.is_fullsock = 1;
+		sock_ops.is_locked_tcp_sock = 1;
 		sock_ops.sk = sk;
 	}
 
@@ -570,6 +571,7 @@ static void bpf_skops_write_hdr_opt(struct sock *sk, struct sk_buff *skb,
 		sock_owned_by_me(sk);
 
 		sock_ops.is_fullsock = 1;
+		sock_ops.is_locked_tcp_sock = 1;
 		sock_ops.sk = sk;
 	}
 
Signature · 1 line
2.43.5
author
#4 lore raw

PATCH v11 4/12 bpf: disable unsafe helpers in TX timestamping callbacks

In reply to Jason Xing

New TX timestamping sock_ops callbacks will be added in the subsequent patch. Some of the existing BPF helpers will not be safe to be used in the TX timestamping callbacks.

The bpf_sock_ops_setsockopt, bpf_sock_ops_getsockopt, and bpf_sock_ops_cb_flags_set require owning the sock lock. TX timestamping callbacks will not own the lock.

The bpf_sock_ops_load_hdr_opt needs the skb->data pointing to the TCP header. This will not be true in the TX timestamping callbacks.

At the beginning of these helpers, this patch checks the bpf_sock->op to ensure these helpers are used by the existing sock_ops callbacks only.

---
 net/core/filter.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
net/core/filter.c +17 -0
index 8631036f6b64..7f56d0bbeb00 100644
@@ -5523,6 +5523,11 @@ static int __bpf_setsockopt(struct sock *sk, int level, int optname,
 	return -EINVAL;
 }
 
+static bool is_locked_tcp_sock_ops(struct bpf_sock_ops_kern *bpf_sock)
+{
+	return bpf_sock->op <= BPF_SOCK_OPS_WRITE_HDR_OPT_CB;
+}
+
 static int _bpf_setsockopt(struct sock *sk, int level, int optname,
 			   char *optval, int optlen)
 {
@@ -5673,6 +5678,9 @@ static const struct bpf_func_proto bpf_sock_addr_getsockopt_proto = {
 BPF_CALL_5(bpf_sock_ops_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 	   int, level, int, optname, char *, optval, int, optlen)
 {
+	if (!is_locked_tcp_sock_ops(bpf_sock))
+		return -EOPNOTSUPP;
+
 	return _bpf_setsockopt(bpf_sock->sk, level, optname, optval, optlen);
 }
 
@@ -5758,6 +5766,9 @@ static int bpf_sock_ops_get_syn(struct bpf_sock_ops_kern *bpf_sock,
 BPF_CALL_5(bpf_sock_ops_getsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 	   int, level, int, optname, char *, optval, int, optlen)
 {
+	if (!is_locked_tcp_sock_ops(bpf_sock))
+		return -EOPNOTSUPP;
+
 	if (IS_ENABLED(CONFIG_INET) && level == SOL_TCP &&
 	    optname >= TCP_BPF_SYN && optname <= TCP_BPF_SYN_MAC) {
 		int ret, copy_len = 0;
@@ -5800,6 +5811,9 @@ BPF_CALL_2(bpf_sock_ops_cb_flags_set, struct bpf_sock_ops_kern *, bpf_sock,
 	struct sock *sk = bpf_sock->sk;
 	int val = argval & BPF_SOCK_OPS_ALL_CB_FLAGS;
 
+	if (!is_locked_tcp_sock_ops(bpf_sock))
+		return -EOPNOTSUPP;
+
 	if (!IS_ENABLED(CONFIG_INET) || !sk_fullsock(sk))
 		return -EINVAL;
 
@@ -7609,6 +7623,9 @@ BPF_CALL_4(bpf_sock_ops_load_hdr_opt, struct bpf_sock_ops_kern *, bpf_sock,
 	u8 search_kind, search_len, copy_len, magic_len;
 	int ret;
 
+	if (!is_locked_tcp_sock_ops(bpf_sock))
+		return -EOPNOTSUPP;
+
 	/* 2 byte is the minimal option len except TCPOPT_NOP and
 	 * TCPOPT_EOL which are useless for the bpf prog to learn
 	 * and this helper disallow loading them also.
Signature · 1 line
2.43.5
author
#5 lore raw

PATCH v11 5/12 net-timestamp: prepare for isolating two modes of SO_TIMESTAMPING

In reply to Jason Xing

No functional changes here. Only add test to see if the orig_skb matches the usage of application SO_TIMESTAMPING.

In this series, bpf timestamping and previous socket timestamping are implemented in the same function __skb_tstamp_tx(). To test the socket enables socket timestamping feature, this function skb_tstamp_tx_report_so_timestamping() is added.

In the next patch, another check for bpf timestamping feature will be introduced just like the above report function, namely, skb_tstamp_tx_report_bpf_timestamping(). Then users will be able to know the socket enables either or both of features.

---
 net/core/skbuff.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
net/core/skbuff.c +20 -0
index a441613a1e6c..341a3290e898 100644
@@ -5539,6 +5539,23 @@ void skb_complete_tx_timestamp(struct sk_buff *skb,
 }
 EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp);
 
+static bool skb_tstamp_tx_report_so_timestamping(struct sk_buff *skb,
+						 struct skb_shared_hwtstamps *hwtstamps,
+						 int tstype)
+{
+	switch (tstype) {
+	case SCM_TSTAMP_SCHED:
+		return skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP;
+	case SCM_TSTAMP_SND:
+		return skb_shinfo(skb)->tx_flags & (hwtstamps ? SKBTX_HW_TSTAMP :
+						    SKBTX_SW_TSTAMP);
+	case SCM_TSTAMP_ACK:
+		return TCP_SKB_CB(skb)->txstamp_ack;
+	}
+
+	return false;
+}
+
 void __skb_tstamp_tx(struct sk_buff *orig_skb,
 		     const struct sk_buff *ack_skb,
 		     struct skb_shared_hwtstamps *hwtstamps,
@@ -5551,6 +5568,9 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 	if (!sk)
 		return;
 
+	if (!skb_tstamp_tx_report_so_timestamping(orig_skb, hwtstamps, tstype))
+		return;
+
 	tsflags = READ_ONCE(sk->sk_tsflags);
 	if (!hwtstamps && !(tsflags & SOF_TIMESTAMPING_OPT_TX_SWHW) &&
 	    skb_shinfo(orig_skb)->tx_flags & SKBTX_IN_PROGRESS)
Signature · 1 line
2.43.5
author
#6 lore raw

PATCH v11 6/12 bpf: add BPF_SOCK_OPS_TS_SCHED_OPT_CB callback

In reply to Jason Xing

Support SCM_TSTAMP_SCHED case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_SCHED_OPT_CB. This callback will occur at the same timestamping point as the user space's SCM_TSTAMP_SCHED. The BPF program can use it to get the same SCM_TSTAMP_SCHED timestamp without modifying the user-space application.

A new SKBTX_BPF flag is added to mark skb_shinfo(skb)->tx_flags, ensuring that the new BPF timestamping and the current user space's SO_TIMESTAMPING do not interfere with each other.

---
 include/linux/skbuff.h         |  6 +++++-
 include/uapi/linux/bpf.h       |  4 ++++
 net/core/dev.c                 |  3 ++-
 net/core/skbuff.c              | 20 ++++++++++++++++++++
 tools/include/uapi/linux/bpf.h |  4 ++++
 5 files changed, 35 insertions(+), 2 deletions(-)
include/linux/skbuff.h +5 -1
index bb2b751d274a..52f6e033e704 100644
@@ -489,10 +489,14 @@ enum {
 
 	/* generate software time stamp when entering packet scheduling */
 	SKBTX_SCHED_TSTAMP = 1 << 6,
+
+	/* used for bpf extension when a bpf program is loaded */
+	SKBTX_BPF = 1 << 7,
 };
 
 #define SKBTX_ANY_SW_TSTAMP	(SKBTX_SW_TSTAMP    | \
-				 SKBTX_SCHED_TSTAMP)
+				 SKBTX_SCHED_TSTAMP | \
+				 SKBTX_BPF)
 #define SKBTX_ANY_TSTAMP	(SKBTX_HW_TSTAMP | \
 				 SKBTX_HW_TSTAMP_USE_CYCLES | \
 				 SKBTX_ANY_SW_TSTAMP)
include/uapi/linux/bpf.h +4 -0
index fa666d51dffe..68664ececdc0 100644
@@ -7035,6 +7035,10 @@ enum {
 					 * by the kernel or the
 					 * earlier bpf-progs.
 					 */
+	BPF_SOCK_OPS_TS_SCHED_OPT_CB,	/* Called when skb is passing through
+					 * dev layer when SK_BPF_CB_TX_TIMESTAMPING
+					 * feature is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/dev.c +2 -1
index c0021cbd28fc..cbbde68c17cb 100644
@@ -4500,7 +4500,8 @@ int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev)
 	skb_reset_mac_header(skb);
 	skb_assert_len(skb);
 
-	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
+	if (unlikely(skb_shinfo(skb)->tx_flags &
+		     (SKBTX_SCHED_TSTAMP | SKBTX_BPF)))
 		__skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SCHED);
 
 	/* Disable soft irqs for various locks below. Also
net/core/skbuff.c +20 -0
index 341a3290e898..0aa54d102624 100644
@@ -5556,6 +5556,23 @@ static bool skb_tstamp_tx_report_so_timestamping(struct sk_buff *skb,
 	return false;
 }
 
+static void skb_tstamp_tx_report_bpf_timestamping(struct sk_buff *skb,
+						  struct sock *sk,
+						  int tstype)
+{
+	int op;
+
+	switch (tstype) {
+	case SCM_TSTAMP_SCHED:
+		op = BPF_SOCK_OPS_TS_SCHED_OPT_CB;
+		break;
+	default:
+		return;
+	}
+
+	bpf_skops_tx_timestamping(sk, skb, op);
+}
+
 void __skb_tstamp_tx(struct sk_buff *orig_skb,
 		     const struct sk_buff *ack_skb,
 		     struct skb_shared_hwtstamps *hwtstamps,
@@ -5568,6 +5585,9 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 	if (!sk)
 		return;
 
+	if (skb_shinfo(orig_skb)->tx_flags & SKBTX_BPF)
+		skb_tstamp_tx_report_bpf_timestamping(orig_skb, sk, tstype);
+
 	if (!skb_tstamp_tx_report_so_timestamping(orig_skb, hwtstamps, tstype))
 		return;
 
tools/include/uapi/linux/bpf.h +4 -0
index 70366f74ef4e..eed91b7296b7 100644
@@ -7025,6 +7025,10 @@ enum {
 					 * by the kernel or the
 					 * earlier bpf-progs.
 					 */
+	BPF_SOCK_OPS_TS_SCHED_OPT_CB,	/* Called when skb is passing through
+					 * dev layer when SK_BPF_CB_TX_TIMESTAMPING
+					 * feature is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.43.5
author
#7 lore raw

PATCH v11 7/12 bpf: add BPF_SOCK_OPS_TS_SW_OPT_CB callback

In reply to Jason Xing

Support sw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_SW_OPT_CB. This callback will occur at the same timestamping point as the user space's software SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

Based on this patch, BPF program will get the software timestamp when the driver is ready to send the skb. In the sebsequent patch, the hardware timestamp will be supported.

---
 include/linux/skbuff.h         | 2 +-
 include/uapi/linux/bpf.h       | 4 ++++
 net/core/skbuff.c              | 9 ++++++++-
 tools/include/uapi/linux/bpf.h | 4 ++++
 4 files changed, 17 insertions(+), 2 deletions(-)
include/linux/skbuff.h +1 -1
index 52f6e033e704..76582500c5ea 100644
@@ -4568,7 +4568,7 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 static inline void skb_tx_timestamp(struct sk_buff *skb)
 {
 	skb_clone_tx_timestamp(skb);
-	if (skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP)
+	if (skb_shinfo(skb)->tx_flags & (SKBTX_SW_TSTAMP | SKBTX_BPF))
 		skb_tstamp_tx(skb, NULL);
 }
 
include/uapi/linux/bpf.h +4 -0
index 68664ececdc0..b3bd92281084 100644
@@ -7039,6 +7039,10 @@ enum {
 					 * dev layer when SK_BPF_CB_TX_TIMESTAMPING
 					 * feature is on.
 					 */
+	BPF_SOCK_OPS_TS_SW_OPT_CB,	/* Called when skb is about to send
+					 * to the nic when SK_BPF_CB_TX_TIMESTAMPING
+					 * feature is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +8 -1
index 0aa54d102624..03b90f04d0b0 100644
@@ -5557,6 +5557,7 @@ static bool skb_tstamp_tx_report_so_timestamping(struct sk_buff *skb,
 }
 
 static void skb_tstamp_tx_report_bpf_timestamping(struct sk_buff *skb,
+						  struct skb_shared_hwtstamps *hwtstamps,
 						  struct sock *sk,
 						  int tstype)
 {
@@ -5566,6 +5567,11 @@ static void skb_tstamp_tx_report_bpf_timestamping(struct sk_buff *skb,
 	case SCM_TSTAMP_SCHED:
 		op = BPF_SOCK_OPS_TS_SCHED_OPT_CB;
 		break;
+	case SCM_TSTAMP_SND:
+		if (hwtstamps)
+			return;
+		op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+		break;
 	default:
 		return;
 	}
@@ -5586,7 +5592,8 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 		return;
 
 	if (skb_shinfo(orig_skb)->tx_flags & SKBTX_BPF)
-		skb_tstamp_tx_report_bpf_timestamping(orig_skb, sk, tstype);
+		skb_tstamp_tx_report_bpf_timestamping(orig_skb, hwtstamps,
+						      sk, tstype);
 
 	if (!skb_tstamp_tx_report_so_timestamping(orig_skb, hwtstamps, tstype))
 		return;
tools/include/uapi/linux/bpf.h +4 -0
index eed91b7296b7..9bd1c7c77b17 100644
@@ -7029,6 +7029,10 @@ enum {
 					 * dev layer when SK_BPF_CB_TX_TIMESTAMPING
 					 * feature is on.
 					 */
+	BPF_SOCK_OPS_TS_SW_OPT_CB,	/* Called when skb is about to send
+					 * to the nic when SK_BPF_CB_TX_TIMESTAMPING
+					 * feature is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.43.5
author
#8 lore raw

PATCH v11 8/12 bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

In reply to Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Considering some drivers doesn't assign the skb with hardware timestamp, this patch do the assignment and then BPF program can acquire the hwstamp from skb directly.

---
 include/linux/skbuff.h         |  4 +++-
 include/uapi/linux/bpf.h       |  4 ++++
 net/core/skbuff.c              | 11 +++++++----
 tools/include/uapi/linux/bpf.h |  4 ++++
 4 files changed, 18 insertions(+), 5 deletions(-)
include/linux/skbuff.h +3 -1
index 76582500c5ea..0b4f1889500d 100644
@@ -470,7 +470,7 @@ struct skb_shared_hwtstamps {
 /* Definitions for tx_flags in struct skb_shared_info */
 enum {
 	/* generate hardware time stamp */
-	SKBTX_HW_TSTAMP = 1 << 0,
+	SKBTX_HW_TSTAMP_NOBPF = 1 << 0,
 
 	/* generate software time stamp when queueing packet to NIC */
 	SKBTX_SW_TSTAMP = 1 << 1,
@@ -494,6 +494,8 @@ enum {
 	SKBTX_BPF = 1 << 7,
 };
 
+#define SKBTX_HW_TSTAMP		(SKBTX_HW_TSTAMP_NOBPF | SKBTX_BPF)
+
 #define SKBTX_ANY_SW_TSTAMP	(SKBTX_SW_TSTAMP    | \
 				 SKBTX_SCHED_TSTAMP | \
 				 SKBTX_BPF)
include/uapi/linux/bpf.h +4 -0
index b3bd92281084..f70edd067edf 100644
@@ -7043,6 +7043,10 @@ enum {
 					 * to the nic when SK_BPF_CB_TX_TIMESTAMPING
 					 * feature is on.
 					 */
+	BPF_SOCK_OPS_TS_HW_OPT_CB,	/* Called in hardware phase when
+					 * SK_BPF_CB_TX_TIMESTAMPING feature
+					 * is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +7 -4
index 03b90f04d0b0..acafa05f7f58 100644
@@ -5547,7 +5547,7 @@ static bool skb_tstamp_tx_report_so_timestamping(struct sk_buff *skb,
 	case SCM_TSTAMP_SCHED:
 		return skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP;
 	case SCM_TSTAMP_SND:
-		return skb_shinfo(skb)->tx_flags & (hwtstamps ? SKBTX_HW_TSTAMP :
+		return skb_shinfo(skb)->tx_flags & (hwtstamps ? SKBTX_HW_TSTAMP_NOBPF :
 						    SKBTX_SW_TSTAMP);
 	case SCM_TSTAMP_ACK:
 		return TCP_SKB_CB(skb)->txstamp_ack;
@@ -5568,9 +5568,12 @@ static void skb_tstamp_tx_report_bpf_timestamping(struct sk_buff *skb,
 		op = BPF_SOCK_OPS_TS_SCHED_OPT_CB;
 		break;
 	case SCM_TSTAMP_SND:
-		if (hwtstamps)
-			return;
-		op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+		if (hwtstamps) {
+			op = BPF_SOCK_OPS_TS_HW_OPT_CB;
+			*skb_hwtstamps(skb) = *hwtstamps;
+		} else {
+			op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+		}
 		break;
 	default:
 		return;
tools/include/uapi/linux/bpf.h +4 -0
index 9bd1c7c77b17..7b9652ce7e3c 100644
@@ -7033,6 +7033,10 @@ enum {
 					 * to the nic when SK_BPF_CB_TX_TIMESTAMPING
 					 * feature is on.
 					 */
+	BPF_SOCK_OPS_TS_HW_OPT_CB,	/* Called in hardware phase when
+					 * SK_BPF_CB_TX_TIMESTAMPING feature
+					 * is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.43.5
maintainer
#9 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Quoted 2 lines

this patch do the assignment and then BPF program
can acquire the hwstamp from skb directly.

If the above is not the case and it is safe to write to the skb_shinfo, and only if respinning anyway, grammar:

s/doesn't/don't/
s/do/does/

author
#10 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 6 lines
Quoted 3 lines

this patch do the assignment and then BPF program
can acquire the hwstamp from skb directly.

If the above is not the case and it is safe to write to the skb_shinfo, and only if respinning anyway, grammar:

From what I've known about various drivers (although very limited), it's safe to do the assignment.

Quoted 3 lines

s/doesn't/don't/
s/do/does/

Thanks for catching these things. If the re-spin is necessary, I will fix them all for sure.

Thanks,
Jason

maintainer
#11 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 22 lines · Jason Xing
Quoted 20 lines · Willem de Bruijn
Quoted 17 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Considering some drivers doesn't assign the skb with hardware timestamp,

Quoted 7 lines
Quoted 2 lines

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

Quoted 19 lines
Quoted 6 lines
Quoted 3 lines

this patch do the assignment and then BPF program
can acquire the hwstamp from skb directly.

If the above is not the case and it is safe to write to the skb_shinfo, and only if respinning anyway, grammar:

From what I've known about various drivers (although very limited), it's safe to do the assignment.

Quoted 3 lines

s/doesn't/don't/
s/do/does/

Thanks for catching these things. If the re-spin is necessary, I will fix them all for sure.

Thanks,
Jason

author
#12 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 32 lines · Willem de Bruijn
Quoted 22 lines · Jason Xing
Quoted 20 lines · Willem de Bruijn
Quoted 17 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Considering some drivers doesn't assign the skb with hardware timestamp,

Quoted 7 lines
Quoted 2 lines

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

Right. i40e uses skb_get() in i40e_tsyn() introduced by commit beb0dff1251d. bnx2x uses it in bnx2x_start_xmit() introduced by commit eeed018cbfa3.

Here are all the drivers listed to be reviewed:
1. drivers/net/ethernet/amd/xgbe/xgbe-drv.c
It uses skb_get() in xgbe_prep_tx_tstamp().

2. drivers/net/ethernet/aquantia/atlantic/aq_ptp.c
Please see aq_ptp_xmit()->__aq_ptp_skb_put(). Every skb enqueued into ring->buff will be 'skb_get()' here.

3. drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
In this case, I cannot see the skb is 'skb_get()' before bnxt_tx_ts_cmp(). bnxt_start_xmit()

    -> tx_buf->skb = skb;

I stopped here and found out about this special case and then pondered over this point.

Willem, does this mean that we are unable to safely modify the field in skb? I'm afraid not. Sorry for my limited knowledge about drivers here... I feel skb_get() cannot be used to know if the skb is safely accessed. Because, let me put in this way, if skb passed to skb_tstamp_tx() can be destroyed in the meantime, that means skb in skb_tstamp_tx() is not safe anymore, which also means all readers accessing this skb are not safe anymore. Based on the analysis, I think accessing the skb by BPF program is safe.

Thanks,
Jason

Quoted 22 lines
Quoted 20 lines
Quoted 7 lines
Quoted 4 lines

this patch do the assignment and then BPF program
can acquire the hwstamp from skb directly.

If the above is not the case and it is safe to write to the skb_shinfo, and only if respinning anyway, grammar:

From what I've known about various drivers (although very limited), it's safe to do the assignment.

Quoted 3 lines

s/doesn't/don't/
s/do/does/

Thanks for catching these things. If the re-spin is necessary, I will fix them all for sure.

Thanks,
Jason

#13 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

author
#14 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 45 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

Quoted 7 lines

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

Thanks,
Jason

maintainer
#15 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 54 lines · Jason Xing
Quoted 45 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

Quoted 7 lines

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Quoted 2 lines

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

That existing behavior looks dodgy then, too.

I don't have time to look into it deeply right now. But it seems to go back all the way to the introduction of hw timestamping in commit ac45f602ee3d in 2009.

I can see how it works in that nothing else holding a clone will likely have a reason to touch those fields. But that does not make it correct.

Your point that the new code is no worse than today probably is true. But when we spot something we prefer to fix it probably. Will need a deeper look..

author
#16 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 56 lines · Willem de Bruijn
Quoted 54 lines · Jason Xing
Quoted 52 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Quoted 8 lines
Quoted 2 lines

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

That existing behavior looks dodgy then, too.

I don't have time to look into it deeply right now. But it seems to go back all the way to the introduction of hw timestamping in commit ac45f602ee3d in 2009.

Right. And hardware timestamping has been used for many years, I presume.

Quoted 6 lines

I can see how it works in that nothing else holding a clone will likely have a reason to touch those fields. But that does not make it correct.

Your point that the new code is no worse than today probably is true.

Right.

Quoted 2 lines

But when we spot something we prefer to fix it probably. Will need a deeper look..

Got it. I added it to my to-do list. If you don't mind, I plan to take a deep look in March and then get back to you because recently I'm occupied by many things. I need to study some of the drivers that don't use skb_get() there.

Thanks,
Jason

author
#17 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 79 lines · Jason Xing
Quoted 56 lines · Willem de Bruijn
Quoted 54 lines · Jason Xing
Quoted 52 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Quoted 8 lines
Quoted 2 lines

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

That existing behavior looks dodgy then, too.

I don't have time to look into it deeply right now. But it seems to go back all the way to the introduction of hw timestamping in commit ac45f602ee3d in 2009.

Right. And hardware timestamping has been used for many years, I presume.

Quoted 6 lines

I can see how it works in that nothing else holding a clone will likely have a reason to touch those fields. But that does not make it correct.

Your point that the new code is no worse than today probably is true.

Right.

Quoted 8 lines
Quoted 2 lines

But when we spot something we prefer to fix it probably. Will need a deeper look..

Got it. I added it to my to-do list. If you don't mind, I plan to take a deep look in March and then get back to you because recently I'm occupied by many things. I need to study some of the drivers that don't use skb_get() there.

Oh, sorry, I forgot to ask: what should we do next regarding this series ?

Thanks,
Jason

author
#18 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 81 lines · Jason Xing
Quoted 79 lines · Jason Xing
Quoted 56 lines · Willem de Bruijn
Quoted 54 lines · Jason Xing
Quoted 52 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Quoted 8 lines
Quoted 2 lines

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

That existing behavior looks dodgy then, too.

I don't have time to look into it deeply right now. But it seems to go back all the way to the introduction of hw timestamping in commit ac45f602ee3d in 2009.

Right. And hardware timestamping has been used for many years, I presume.

Quoted 6 lines

I can see how it works in that nothing else holding a clone will likely have a reason to touch those fields. But that does not make it correct.

Your point that the new code is no worse than today probably is true.

Right.

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines

But when we spot something we prefer to fix it probably. Will need a deeper look..

Got it. I added it to my to-do list. If you don't mind, I plan to take a deep look in March and then get back to you because recently I'm occupied by many things. I need to study some of the drivers that don't use skb_get() there.

One more thing I'd like to mention here is if this is real bug, I think we should fix in the driver side since __skb_tstamp_tx() will always clone the skb when tsflag doesn't include SOF_TIMESTAMPING_OPT_TSONLY. We cannot force every application to add SOF_TIMESTAMPING_OPT_TSONLY option to prevent such an 'issue' happening.

Let me set those special drivers as examples, if the skb can be destroyed in __skb_tstamp_tx() , it means the skb staying in the driver can be destroyed at any time before entering __skb_tstamp_tx(). Then we may conclude that the skb cannot be accessed safely as long as without skb_get() protection. Technically speaking, It's a driver side issue, not socket/bpf timestamping feature.

The same resolution applies for bpf timestamping as well. So I feel this point would not block this series from being merged?

My instinct tells me it can not be a problem because it was added in 2009. Sorry that I'm unable to persuade you through theory for now.

Thanks,
Jason

maintainer
#19 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

In reply to Jason Xing
Quoted 83 lines · Jason Xing
Quoted 82 lines · Jason Xing
Quoted 56 lines · Willem de Bruijn
Quoted 54 lines · Jason Xing
Quoted 52 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Quoted 8 lines
Quoted 2 lines

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

That existing behavior looks dodgy then, too.

I don't have time to look into it deeply right now. But it seems to go back all the way to the introduction of hw timestamping in commit ac45f602ee3d in 2009.

Right. And hardware timestamping has been used for many years, I presume.

Quoted 6 lines

I can see how it works in that nothing else holding a clone will likely have a reason to touch those fields. But that does not make it correct.

Your point that the new code is no worse than today probably is true.

Right.

Quoted 2 lines

But when we spot something we prefer to fix it probably. Will need a deeper look..

Quoted 7 lines
Quoted 5 lines

Got it. I added it to my to-do list. If you don't mind, I plan to take a deep look in March and then get back to you because recently I'm occupied by many things. I need to study some of the drivers that don't use skb_get() there.

Oh, sorry, I forgot to ask: what should we do next regarding this series ?

Please resubmit with the two remaining small issues addressed:

- Martin's point about moving code to patch 8
- Remove unused variable

author
#20 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

Quoted 91 lines · Willem de Bruijn
Quoted 89 lines · Jason Xing
Quoted 87 lines · Jason Xing
Quoted 56 lines · Willem de Bruijn
Quoted 54 lines · Jason Xing
Quoted 52 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Quoted 8 lines
Quoted 2 lines

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

That existing behavior looks dodgy then, too.

I don't have time to look into it deeply right now. But it seems to go back all the way to the introduction of hw timestamping in commit ac45f602ee3d in 2009.

Right. And hardware timestamping has been used for many years, I presume.

Quoted 6 lines

I can see how it works in that nothing else holding a clone will likely have a reason to touch those fields. But that does not make it correct.

Your point that the new code is no worse than today probably is true.

Right.

Quoted 2 lines

But when we spot something we prefer to fix it probably. Will need a deeper look..

Got it. I added it to my to-do list. If you don't mind, I plan to take a deep look in March and then get back to you because recently I'm occupied by many things. I need to study some of the drivers that don't use skb_get() there.

Quoted 6 lines
Quoted 1 line

Oh, sorry, I forgot to ask: what should we do next regarding this series ?

Please resubmit with the two remaining small issues addressed:

- Martin's point about moving code to patch 8
- Remove unused variable

Sure, the v12 is coming soon :)

Thanks,
Jason

maintainer
#21 lore raw

Re: [PATCH bpf-next v11 08/12] bpf: add BPF_SOCK_OPS_TS_HW_OPT_CB callback

In reply to Willem de Bruijn
Quoted 64 lines · Willem de Bruijn
Quoted 54 lines · Jason Xing
Quoted 45 lines · Martin KaFai Lau
Quoted 34 lines · Jason Xing
Quoted 32 lines · Willem de Bruijn
Quoted 29 lines · Jason Xing
Quoted 17 lines · Willem de Bruijn
Quoted 15 lines · Jason Xing

Support hw SCM_TSTAMP_SND case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_HW_OPT_CB. This callback will occur at the same timestamping point as the user space's hardware SCM_TSTAMP_SND. The BPF program can use it to get the same SCM_TSTAMP_SND timestamp without modifying the user-space application.

To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers from driver side using SKBTX_HW_TSTAMP. The new definition of SKBTX_HW_TSTAMP means the combination tests of socket timestamping and bpf timestamping. After this patch, drivers can work under the bpf timestamping.

Quoted 5 lines
Quoted 2 lines

Considering some drivers doesn't assign the skb with hardware timestamp,

This is not for a real technical limitation, like the skb perhaps being cloned or shared?

Agreed on this point. I'm kind of familiar with I40E, so I dare to say the reason why it doesn't assign the hwtstamp is because the skb will soon be destroyed, that is to say, it's pointless to assign the timestamp.

Quoted 8 lines
Quoted 8 lines

Makes sense.

But that does not ensure that the skb is exclusively owned. Nor that the same is true for all drivers using this API (which is not small, but small enough to manually review if need be).

The first two examples I happened to look at, i40e and bnx2x, both use skb_get() to get a non-exclusive skb reference for their ptp_tx_skb.

Quoted 7 lines

I think the existing __skb_tstamp_tx() function is also assigning to skb_hwtstamps(skb). The skb may be cloned from the orig_skb first, but they still share the same shinfo. My understanding is that this patch is assigning to the shinfo earlier, so it should not have changed the driver's expectation on the skb_hwtstamps(skb) after calling __skb_tstamp_tx(). If there are drivers assuming exclusive access to the skb_hwtstamps(skb), probably it is something that needs to be addressed regardless and should not be the common case?

Quoted 2 lines

Right, it's also what I was trying to say but missed. Thanks for the supplementary info:)

That existing behavior looks dodgy then, too.

I don't have time to look into it deeply right now. But it seems to go back all the way to the introduction of hw timestamping in commit ac45f602ee3d in 2009.

Quoted 7 lines

I can see how it works in that nothing else holding a clone will likely have a reason to touch those fields. But that does not make it correct.

Your point that the new code is no worse than today probably is true. But when we spot something we prefer to fix it probably. Will need a deeper look..

The original commit explains the rationale. It is as I expected: the field is newly introduced and for every skb it is therefore known that no other path exists that touches that field.

"
The new semantic for hardware/software time stamping around ndo_start_xmit() is based on two assumptions about existing network device drivers which don't support hardware time stamping and know nothing about it:
- they leave the new skb_shared_tx unmodified
- the keep the connection to the originating socket in skb->sk alive, i.e., don't call skb_orphan()

Given that skb_shared_tx is new, the first assumption is safe.
"

I'm not aware of us relying on such soft assurances for other fields in skb_shared_info wrt accessing while cloned. But we can assume it out of scope for this series.

author
#22 lore raw

PATCH v11 9/12 bpf: add BPF_SOCK_OPS_TS_ACK_OPT_CB callback

In reply to Jason Xing

Support the ACK case for bpf timestamping.

Add a new sock_ops callback, BPF_SOCK_OPS_TS_ACK_OPT_CB. This callback will occur at the same timestamping point as the user space's SCM_TSTAMP_ACK. The BPF program can use it to get the same SCM_TSTAMP_ACK timestamp without modifying the user-space application.

This patch extends txstamp_ack to two bits: 1 stands for SO_TIMESTAMPING mode, 2 bpf extension.

---
 include/net/tcp.h              | 6 ++++--
 include/uapi/linux/bpf.h       | 5 +++++
 net/core/skbuff.c              | 5 ++++-
 net/dsa/user.c                 | 2 +-
 net/ipv4/tcp.c                 | 2 +-
 net/socket.c                   | 2 +-
 tools/include/uapi/linux/bpf.h | 5 +++++
 7 files changed, 21 insertions(+), 6 deletions(-)
include/net/tcp.h +4 -2
index 4c4dca59352b..2e2fc72e115b 100644
@@ -958,10 +958,12 @@ struct tcp_skb_cb {
 
 	__u8		sacked;		/* State flags for SACK.	*/
 	__u8		ip_dsfield;	/* IPv4 tos or IPv6 dsfield	*/
-	__u8		txstamp_ack:1,	/* Record TX timestamp for ack? */
+#define TSTAMP_ACK_SK	0x1
+#define TSTAMP_ACK_BPF	0x2
+	__u8		txstamp_ack:2,	/* Record TX timestamp for ack? */
 			eor:1,		/* Is skb MSG_EOR marked? */
 			has_rxtstamp:1,	/* SKB has a RX timestamp	*/
-			unused:5;
+			unused:4;
 	__u32		ack_seq;	/* Sequence number ACK'd	*/
 	union {
 		struct {
include/uapi/linux/bpf.h +5 -0
index f70edd067edf..9355d617767f 100644
@@ -7047,6 +7047,11 @@ enum {
 					 * SK_BPF_CB_TX_TIMESTAMPING feature
 					 * is on.
 					 */
+	BPF_SOCK_OPS_TS_ACK_OPT_CB,	/* Called when all the skbs in the
+					 * same sendmsg call are acked
+					 * when SK_BPF_CB_TX_TIMESTAMPING
+					 * feature is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +4 -1
index acafa05f7f58..f096ca6c2ced 100644
@@ -5550,7 +5550,7 @@ static bool skb_tstamp_tx_report_so_timestamping(struct sk_buff *skb,
 		return skb_shinfo(skb)->tx_flags & (hwtstamps ? SKBTX_HW_TSTAMP_NOBPF :
 						    SKBTX_SW_TSTAMP);
 	case SCM_TSTAMP_ACK:
-		return TCP_SKB_CB(skb)->txstamp_ack;
+		return TCP_SKB_CB(skb)->txstamp_ack & TSTAMP_ACK_SK;
 	}
 
 	return false;
@@ -5575,6 +5575,9 @@ static void skb_tstamp_tx_report_bpf_timestamping(struct sk_buff *skb,
 			op = BPF_SOCK_OPS_TS_SW_OPT_CB;
 		}
 		break;
+	case SCM_TSTAMP_ACK:
+		op = BPF_SOCK_OPS_TS_ACK_OPT_CB;
+		break;
 	default:
 		return;
 	}
net/dsa/user.c +1 -1
index 291ab1b4acc4..794fe553dd77 100644
@@ -897,7 +897,7 @@ static void dsa_skb_tx_timestamp(struct dsa_user_priv *p,
 {
 	struct dsa_switch *ds = p->dp->ds;
 
-	if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
+	if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP_NOBPF))
 		return;
 
 	if (!ds->ops->port_txtstamp)
net/ipv4/tcp.c +1 -1
index 0d704bda6c41..12b9c4f9c151 100644
@@ -488,7 +488,7 @@ static void tcp_tx_timestamp(struct sock *sk, struct sockcm_cookie *sockc)
 
 		sock_tx_timestamp(sk, sockc, &shinfo->tx_flags);
 		if (tsflags & SOF_TIMESTAMPING_TX_ACK)
-			tcb->txstamp_ack = 1;
+			tcb->txstamp_ack |= TSTAMP_ACK_SK;
 		if (tsflags & SOF_TIMESTAMPING_TX_RECORD_MASK)
 			shinfo->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;
 	}
net/socket.c +1 -1
index 262a28b59c7f..517de433d4bb 100644
@@ -676,7 +676,7 @@ void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags)
 	u8 flags = *tx_flags;
 
 	if (tsflags & SOF_TIMESTAMPING_TX_HARDWARE) {
-		flags |= SKBTX_HW_TSTAMP;
+		flags |= SKBTX_HW_TSTAMP_NOBPF;
 
 		/* PTP hardware clocks can provide a free running cycle counter
 		 * as a time base for virtual clocks. Tell driver to use the
tools/include/uapi/linux/bpf.h +5 -0
index 7b9652ce7e3c..d3e2988b3b4c 100644
@@ -7037,6 +7037,11 @@ enum {
 					 * SK_BPF_CB_TX_TIMESTAMPING feature
 					 * is on.
 					 */
+	BPF_SOCK_OPS_TS_ACK_OPT_CB,	/* Called when all the skbs in the
+					 * same sendmsg call are acked
+					 * when SK_BPF_CB_TX_TIMESTAMPING
+					 * feature is on.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.43.5
#23 lore raw

Re: [PATCH bpf-next v11 09/12] bpf: add BPF_SOCK_OPS_TS_ACK_OPT_CB callback

net/dsa/user.c static void dsa_skb_tx_timestamp(struct dsa_user_priv *p, · line 900

Quoted 10 lines · Jason Xing
net/dsa/user.c +1 -1
index 291ab1b4acc4..794fe553dd77 100644
@@ -897,7 +897,7 @@ static void dsa_skb_tx_timestamp(struct dsa_user_priv *p,
  {
  	struct dsa_switch *ds = p->dp->ds;
 
-	if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
+	if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP_NOBPF))

This change should be in patch 8.

[ ... ]

net/socket.c void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags) · line 679

Quoted 10 lines
net/socket.c +1 -1
index 262a28b59c7f..517de433d4bb 100644
@@ -676,7 +676,7 @@ void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags)
  	u8 flags = *tx_flags;
 
  	if (tsflags & SOF_TIMESTAMPING_TX_HARDWARE) {
-		flags |= SKBTX_HW_TSTAMP;
+		flags |= SKBTX_HW_TSTAMP_NOBPF;

Same here.

author
#24 lore raw

Re: [PATCH bpf-next v11 09/12] bpf: add BPF_SOCK_OPS_TS_ACK_OPT_CB callback

Quoted 24 lines · Martin KaFai Lau

net/dsa/user.c static void dsa_skb_tx_timestamp(struct dsa_user_priv *p, · line 900

Quoted 10 lines · Jason Xing
net/dsa/user.c +1 -1
index 291ab1b4acc4..794fe553dd77 100644
@@ -897,7 +897,7 @@ static void dsa_skb_tx_timestamp(struct dsa_user_priv *p,
  {
      struct dsa_switch *ds = p->dp->ds;
 
-     if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
+     if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP_NOBPF))

This change should be in patch 8.

[ ... ]

Quoted 7 lines
net/socket.c +0 -0
index 262a28b59c7f..517de433d4bb 100644
@@ -676,7 +676,7 @@ void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags)
      u8 flags = *tx_flags;
 
Quoted 5 lines

net/socket.c void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags) · line 679

Quoted 3 lines
net/socket.c +1 -1
      if (tsflags & SOF_TIMESTAMPING_TX_HARDWARE) {
-             flags |= SKBTX_HW_TSTAMP;
+             flags |= SKBTX_HW_TSTAMP_NOBPF;

Same here.

Sure, you're right. If you feel it's necessary to re-spin, I will adjust these two points :)

Thanks,
Jason

Quoted 2 lines
#25 lore raw

Re: [PATCH bpf-next v11 09/12] bpf: add BPF_SOCK_OPS_TS_ACK_OPT_CB callback

Quoted 25 lines · Jason Xing
Quoted 24 lines · Martin KaFai Lau

net/dsa/user.c static void dsa_skb_tx_timestamp(struct dsa_user_priv *p, · line 900

Quoted 10 lines · Jason Xing
net/dsa/user.c +1 -1
index 291ab1b4acc4..794fe553dd77 100644
@@ -897,7 +897,7 @@ static void dsa_skb_tx_timestamp(struct dsa_user_priv *p,
   {
       struct dsa_switch *ds = p->dp->ds;
 
-     if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
+     if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP_NOBPF))

This change should be in patch 8.

[ ... ]

Quoted 7 lines
net/socket.c +0 -0
index 262a28b59c7f..517de433d4bb 100644
@@ -676,7 +676,7 @@ void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags)
       u8 flags = *tx_flags;
 
Quoted 8 lines
Quoted 5 lines

net/socket.c void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags) · line 679

Quoted 3 lines
net/socket.c +1 -1
       if (tsflags & SOF_TIMESTAMPING_TX_HARDWARE) {
-             flags |= SKBTX_HW_TSTAMP;
+             flags |= SKBTX_HW_TSTAMP_NOBPF;

Same here.

Sure, you're right. If you feel it's necessary to re-spin, I will adjust these two points :)

That will be good. I would wait a bit to collect Willem's comment first.

maintainer
#26 lore raw

Re: [PATCH bpf-next v11 09/12] bpf: add BPF_SOCK_OPS_TS_ACK_OPT_CB callback

Quoted 32 lines · Martin KaFai Lau
Quoted 31 lines · Jason Xing
Quoted 29 lines · Martin KaFai Lau

net/dsa/user.c static void dsa_skb_tx_timestamp(struct dsa_user_priv *p, · line 900

Quoted 10 lines · Jason Xing
net/dsa/user.c +1 -1
index 291ab1b4acc4..794fe553dd77 100644
@@ -897,7 +897,7 @@ static void dsa_skb_tx_timestamp(struct dsa_user_priv *p,
   {
       struct dsa_switch *ds = p->dp->ds;
 
-     if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
+     if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP_NOBPF))

This change should be in patch 8.

[ ... ]

net/socket.c void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags) · line 679

Quoted 10 lines
net/socket.c +1 -1
index 262a28b59c7f..517de433d4bb 100644
@@ -676,7 +676,7 @@ void __sock_tx_timestamp(__u32 tsflags, __u8 *tx_flags)
       u8 flags = *tx_flags;
 
       if (tsflags & SOF_TIMESTAMPING_TX_HARDWARE) {
-             flags |= SKBTX_HW_TSTAMP;
+             flags |= SKBTX_HW_TSTAMP_NOBPF;

Same here.

Quoted 4 lines
Quoted 2 lines

Sure, you're right. If you feel it's necessary to re-spin, I will adjust these two points :)

That will be good. I would wait a bit to collect Willem's comment first.

Depends on answers to my few remaining points.

author
#27 lore raw

PATCH v11 10/12 bpf: add BPF_SOCK_OPS_TS_SND_CB callback

In reply to Jason Xing

This patch introduces a new callback in tcp_tx_timestamp() to correlate tcp_sendmsg timestamp with timestamps from other tx timestamping callbacks (e.g., SND/SW/ACK).

Without this patch, BPF program wouldn't know which timestamps belong to which flow because of no socket lock protection. This new callback is inserted in tcp_tx_timestamp() to address this issue because tcp_tx_timestamp() still owns the same socket lock with tcp_sendmsg_locked() in the meanwhile tcp_tx_timestamp() initializes the timestamping related fields for the skb, especially tskey. The tskey is the bridge to do the correlation.

For TCP, BPF program hooks the beginning of tcp_sendmsg_locked() and then stores the sendmsg timestamp at the bpf_sk_storage, correlating this timestamp with its tskey that are later used in other sending timestamping callbacks.

---
 include/uapi/linux/bpf.h       | 5 +++++
 net/ipv4/tcp.c                 | 4 ++++
 tools/include/uapi/linux/bpf.h | 5 +++++
 3 files changed, 14 insertions(+)
include/uapi/linux/bpf.h +5 -0
index 9355d617767f..86fca729fbd8 100644
@@ -7052,6 +7052,11 @@ enum {
 					 * when SK_BPF_CB_TX_TIMESTAMPING
 					 * feature is on.
 					 */
+	BPF_SOCK_OPS_TS_SND_CB,		/* Called when every sendmsg syscall
+					 * is triggered. It's used to correlate
+					 * sendmsg timestamp with corresponding
+					 * tskey.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/ipv4/tcp.c +4 -0
index 12b9c4f9c151..4b9739cd3bc5 100644
@@ -492,6 +492,10 @@ static void tcp_tx_timestamp(struct sock *sk, struct sockcm_cookie *sockc)
 		if (tsflags & SOF_TIMESTAMPING_TX_RECORD_MASK)
 			shinfo->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;
 	}
+
+	if (cgroup_bpf_enabled(CGROUP_SOCK_OPS) &&
+	    SK_BPF_CB_FLAG_TEST(sk, SK_BPF_CB_TX_TIMESTAMPING) && skb)
+		bpf_skops_tx_timestamping(sk, skb, BPF_SOCK_OPS_TS_SND_CB);
 }
 
 static bool tcp_stream_is_readable(struct sock *sk, int target)
tools/include/uapi/linux/bpf.h +5 -0
index d3e2988b3b4c..2739ee0154a0 100644
@@ -7042,6 +7042,11 @@ enum {
 					 * when SK_BPF_CB_TX_TIMESTAMPING
 					 * feature is on.
 					 */
+	BPF_SOCK_OPS_TS_SND_CB,		/* Called when every sendmsg syscall
+					 * is triggered. It's used to correlate
+					 * sendmsg timestamp with corresponding
+					 * tskey.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.43.5
author
#28 lore raw

PATCH v11 11/12 bpf: support selective sampling for bpf timestamping

In reply to Jason Xing

Add the bpf_sock_ops_enable_tx_tstamp kfunc to allow BPF programs to selectively enable TX timestamping on a skb during tcp_sendmsg().

For example, BPF program will limit tracking X numbers of packets and then will stop there instead of tracing all the sendmsgs of matched flow all along. It would be helpful for users who cannot afford to calculate latencies from every sendmsg call probably due to the performance or storage space consideration.

---
 kernel/bpf/btf.c  |  1 +
 net/core/filter.c | 33 ++++++++++++++++++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)
kernel/bpf/btf.c +1 -0
index 9433b6467bbe..740210f883dc 100644
@@ -8522,6 +8522,7 @@ static int bpf_prog_type_to_kfunc_hook(enum bpf_prog_type prog_type)
 	case BPF_PROG_TYPE_CGROUP_SOCK_ADDR:
 	case BPF_PROG_TYPE_CGROUP_SOCKOPT:
 	case BPF_PROG_TYPE_CGROUP_SYSCTL:
+	case BPF_PROG_TYPE_SOCK_OPS:
 		return BTF_KFUNC_HOOK_CGROUP;
 	case BPF_PROG_TYPE_SCHED_ACT:
 		return BTF_KFUNC_HOOK_SCHED_ACT;
net/core/filter.c +32 -1
index 7f56d0bbeb00..3b4c1e7b1470 100644
@@ -12102,6 +12102,27 @@ __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk,
 #endif
 }
 
+__bpf_kfunc int bpf_sock_ops_enable_tx_tstamp(struct bpf_sock_ops_kern *skops,
+					      u64 flags)
+{
+	struct sk_buff *skb;
+	struct sock *sk;
+
+	if (skops->op != BPF_SOCK_OPS_TS_SND_CB)
+		return -EOPNOTSUPP;
+
+	if (flags)
+		return -EINVAL;
+
+	skb = skops->skb;
+	sk = skops->sk;
+	skb_shinfo(skb)->tx_flags |= SKBTX_BPF;
+	TCP_SKB_CB(skb)->txstamp_ack |= TSTAMP_ACK_BPF;
+	skb_shinfo(skb)->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;
+
+	return 0;
+}
+
 __bpf_kfunc_end_defs();
 
 int bpf_dynptr_from_skb_rdonly(struct __sk_buff *skb, u64 flags,
@@ -12135,6 +12156,10 @@ BTF_KFUNCS_START(bpf_kfunc_check_set_tcp_reqsk)
 BTF_ID_FLAGS(func, bpf_sk_assign_tcp_reqsk, KF_TRUSTED_ARGS)
 BTF_KFUNCS_END(bpf_kfunc_check_set_tcp_reqsk)
 
+BTF_KFUNCS_START(bpf_kfunc_check_set_sock_ops)
+BTF_ID_FLAGS(func, bpf_sock_ops_enable_tx_tstamp, KF_TRUSTED_ARGS)
+BTF_KFUNCS_END(bpf_kfunc_check_set_sock_ops)
+
 static const struct btf_kfunc_id_set bpf_kfunc_set_skb = {
 	.owner = THIS_MODULE,
 	.set = &bpf_kfunc_check_set_skb,
@@ -12155,6 +12180,11 @@ static const struct btf_kfunc_id_set bpf_kfunc_set_tcp_reqsk = {
 	.set = &bpf_kfunc_check_set_tcp_reqsk,
 };
 
+static const struct btf_kfunc_id_set bpf_kfunc_set_sock_ops = {
+	.owner = THIS_MODULE,
+	.set = &bpf_kfunc_check_set_sock_ops,
+};
+
 static int __init bpf_kfunc_init(void)
 {
 	int ret;
@@ -12173,7 +12203,8 @@ static int __init bpf_kfunc_init(void)
 	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_XDP, &bpf_kfunc_set_xdp);
 	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
 					       &bpf_kfunc_set_sock_addr);
-	return ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_SCHED_CLS, &bpf_kfunc_set_tcp_reqsk);
+	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_SCHED_CLS, &bpf_kfunc_set_tcp_reqsk);
+	return ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_SOCK_OPS, &bpf_kfunc_set_sock_ops);
 }
 late_initcall(bpf_kfunc_init);
 
Signature · 1 line
2.43.5
maintainer
#29 lore raw

Re: [PATCH bpf-next v11 11/12] bpf: support selective sampling for bpf timestamping

Quoted 39 lines · Jason Xing

Add the bpf_sock_ops_enable_tx_tstamp kfunc to allow BPF programs to selectively enable TX timestamping on a skb during tcp_sendmsg().

For example, BPF program will limit tracking X numbers of packets and then will stop there instead of tracing all the sendmsgs of matched flow all along. It would be helpful for users who cannot afford to calculate latencies from every sendmsg call probably due to the performance or storage space consideration.

---
 kernel/bpf/btf.c  |  1 +
 net/core/filter.c | 33 ++++++++++++++++++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)
kernel/bpf/btf.c +1 -0
index 9433b6467bbe..740210f883dc 100644
@@ -8522,6 +8522,7 @@ static int bpf_prog_type_to_kfunc_hook(enum bpf_prog_type prog_type)
 	case BPF_PROG_TYPE_CGROUP_SOCK_ADDR:
 	case BPF_PROG_TYPE_CGROUP_SOCKOPT:
 	case BPF_PROG_TYPE_CGROUP_SYSCTL:
+	case BPF_PROG_TYPE_SOCK_OPS:
 		return BTF_KFUNC_HOOK_CGROUP;
 	case BPF_PROG_TYPE_SCHED_ACT:
 		return BTF_KFUNC_HOOK_SCHED_ACT;
net/core/filter.c +4 -0
index 7f56d0bbeb00..3b4c1e7b1470 100644
@@ -12102,6 +12102,27 @@ __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk,
 #endif
 }
 
+__bpf_kfunc int bpf_sock_ops_enable_tx_tstamp(struct bpf_sock_ops_kern *skops,
+					      u64 flags)
+{
+	struct sk_buff *skb;

net/core/filter.c __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk, · line 12118

Quoted 10 lines
net/core/filter.c +10 -0
+	struct sock *sk;
+
+	if (skops->op != BPF_SOCK_OPS_TS_SND_CB)
+		return -EOPNOTSUPP;
+
+	if (flags)
+		return -EINVAL;
+
+	skb = skops->skb;
+	sk = skops->sk;

nit: not used

net/core/filter.c __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk, · line 12121

Quoted 3 lines
net/core/filter.c +3 -0
+	skb_shinfo(skb)->tx_flags |= SKBTX_BPF;
+	TCP_SKB_CB(skb)->txstamp_ack |= TSTAMP_ACK_BPF;
+	skb_shinfo(skb)->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;

Can this overwrite the seqno previously calculated by tcp_tx_timestamp?

I suppose that that is safe as long as both calculate the same value. But good to have explicit.

Quoted 4 lines
net/core/filter.c +4 -0
+
+	return 0;
+}
+
author
#30 lore raw

Re: [PATCH bpf-next v11 11/12] bpf: support selective sampling for bpf timestamping

Quoted 37 lines · Willem de Bruijn
Quoted 35 lines · Jason Xing

Add the bpf_sock_ops_enable_tx_tstamp kfunc to allow BPF programs to selectively enable TX timestamping on a skb during tcp_sendmsg().

For example, BPF program will limit tracking X numbers of packets and then will stop there instead of tracing all the sendmsgs of matched flow all along. It would be helpful for users who cannot afford to calculate latencies from every sendmsg call probably due to the performance or storage space consideration.

---
 kernel/bpf/btf.c  |  1 +
 net/core/filter.c | 33 ++++++++++++++++++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)
kernel/bpf/btf.c +1 -0
index 9433b6467bbe..740210f883dc 100644
@@ -8522,6 +8522,7 @@ static int bpf_prog_type_to_kfunc_hook(enum bpf_prog_type prog_type)
      case BPF_PROG_TYPE_CGROUP_SOCK_ADDR:
      case BPF_PROG_TYPE_CGROUP_SOCKOPT:
      case BPF_PROG_TYPE_CGROUP_SYSCTL:
+     case BPF_PROG_TYPE_SOCK_OPS:
              return BTF_KFUNC_HOOK_CGROUP;
      case BPF_PROG_TYPE_SCHED_ACT:
              return BTF_KFUNC_HOOK_SCHED_ACT;
net/core/filter.c +0 -0
index 7f56d0bbeb00..3b4c1e7b1470 100644
@@ -12102,6 +12102,27 @@ __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk,
 #endif
 }
 
Quoted 16 lines
Quoted 4 lines
net/core/filter.c +4 -0
+__bpf_kfunc int bpf_sock_ops_enable_tx_tstamp(struct bpf_sock_ops_kern *skops,
+                                           u64 flags)
+{
+     struct sk_buff *skb;

net/core/filter.c __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk, · line 12118

Quoted 10 lines
net/core/filter.c +10 -0
+     struct sock *sk;
+
+     if (skops->op != BPF_SOCK_OPS_TS_SND_CB)
+             return -EOPNOTSUPP;
+
+     if (flags)
+             return -EINVAL;
+
+     skb = skops->skb;
+     sk = skops->sk;

nit: not used

BPF programs can use this in the future if necessary whereas the selftests don't reflect it.

Quoted 6 lines

net/core/filter.c __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk, · line 12121

Quoted 4 lines
net/core/filter.c +3 -0
+     skb_shinfo(skb)->tx_flags |= SKBTX_BPF;
+     TCP_SKB_CB(skb)->txstamp_ack |= TSTAMP_ACK_BPF;
+     skb_shinfo(skb)->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;

Can this overwrite the seqno previously calculated by tcp_tx_timestamp?

seqno? If you are referring to seqno, I don't think the BPF program is allowed to modify it because SOCK_OPS_GET_OR_SET_FIELD() only supports overwriting sk_txhash only. Please see sock_ops_convert_ctx_access().

Thanks,
Jason

Quoted 8 lines

I suppose that that is safe as long as both calculate the same value. But good to have explicit.

Quoted 4 lines
net/core/filter.c +4 -0
+
+     return 0;
+}
+
maintainer
#31 lore raw

Re: [PATCH bpf-next v11 11/12] bpf: support selective sampling for bpf timestamping

Quoted 56 lines · Jason Xing
Quoted 37 lines · Willem de Bruijn
Quoted 35 lines · Jason Xing

Add the bpf_sock_ops_enable_tx_tstamp kfunc to allow BPF programs to selectively enable TX timestamping on a skb during tcp_sendmsg().

For example, BPF program will limit tracking X numbers of packets and then will stop there instead of tracing all the sendmsgs of matched flow all along. It would be helpful for users who cannot afford to calculate latencies from every sendmsg call probably due to the performance or storage space consideration.

---
 kernel/bpf/btf.c  |  1 +
 net/core/filter.c | 33 ++++++++++++++++++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)
kernel/bpf/btf.c +1 -0
index 9433b6467bbe..740210f883dc 100644
@@ -8522,6 +8522,7 @@ static int bpf_prog_type_to_kfunc_hook(enum bpf_prog_type prog_type)
      case BPF_PROG_TYPE_CGROUP_SOCK_ADDR:
      case BPF_PROG_TYPE_CGROUP_SOCKOPT:
      case BPF_PROG_TYPE_CGROUP_SYSCTL:
+     case BPF_PROG_TYPE_SOCK_OPS:
              return BTF_KFUNC_HOOK_CGROUP;
      case BPF_PROG_TYPE_SCHED_ACT:
              return BTF_KFUNC_HOOK_SCHED_ACT;
net/core/filter.c +0 -0
index 7f56d0bbeb00..3b4c1e7b1470 100644
@@ -12102,6 +12102,27 @@ __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk,
 #endif
 }
 
Quoted 16 lines
Quoted 4 lines
net/core/filter.c +4 -0
+__bpf_kfunc int bpf_sock_ops_enable_tx_tstamp(struct bpf_sock_ops_kern *skops,
+                                           u64 flags)
+{
+     struct sk_buff *skb;

net/core/filter.c __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk, · line 12118

Quoted 10 lines
net/core/filter.c +10 -0
+     struct sock *sk;
+
+     if (skops->op != BPF_SOCK_OPS_TS_SND_CB)
+             return -EOPNOTSUPP;
+
+     if (flags)
+             return -EINVAL;
+
+     skb = skops->skb;
+     sk = skops->sk;

nit: not used

Quoted 2 lines

BPF programs can use this in the future if necessary whereas the selftests don't reflect it.

How does defining a local variable help there?

Quoted 10 lines
Quoted 6 lines

net/core/filter.c __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk, · line 12121

Quoted 4 lines
net/core/filter.c +3 -0
+     skb_shinfo(skb)->tx_flags |= SKBTX_BPF;
+     TCP_SKB_CB(skb)->txstamp_ack |= TSTAMP_ACK_BPF;
+     skb_shinfo(skb)->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;

Can this overwrite the seqno previously calculated by tcp_tx_timestamp?

seqno? If you are referring to seqno, I don't think the BPF program is allowed to modify it because SOCK_OPS_GET_OR_SET_FIELD() only supports overwriting sk_txhash only. Please see sock_ops_convert_ctx_access().

I meant tskey

author
#32 lore raw

Re: [PATCH bpf-next v11 11/12] bpf: support selective sampling for bpf timestamping

Quoted 58 lines · Willem de Bruijn
Quoted 56 lines · Jason Xing
Quoted 53 lines · Willem de Bruijn
Quoted 39 lines · Jason Xing

Add the bpf_sock_ops_enable_tx_tstamp kfunc to allow BPF programs to selectively enable TX timestamping on a skb during tcp_sendmsg().

For example, BPF program will limit tracking X numbers of packets and then will stop there instead of tracing all the sendmsgs of matched flow all along. It would be helpful for users who cannot afford to calculate latencies from every sendmsg call probably due to the performance or storage space consideration.

---
 kernel/bpf/btf.c  |  1 +
 net/core/filter.c | 33 ++++++++++++++++++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)
kernel/bpf/btf.c +1 -0
index 9433b6467bbe..740210f883dc 100644
@@ -8522,6 +8522,7 @@ static int bpf_prog_type_to_kfunc_hook(enum bpf_prog_type prog_type)
      case BPF_PROG_TYPE_CGROUP_SOCK_ADDR:
      case BPF_PROG_TYPE_CGROUP_SOCKOPT:
      case BPF_PROG_TYPE_CGROUP_SYSCTL:
+     case BPF_PROG_TYPE_SOCK_OPS:
              return BTF_KFUNC_HOOK_CGROUP;
      case BPF_PROG_TYPE_SCHED_ACT:
              return BTF_KFUNC_HOOK_SCHED_ACT;
net/core/filter.c +4 -0
index 7f56d0bbeb00..3b4c1e7b1470 100644
@@ -12102,6 +12102,27 @@ __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk,
 #endif
 }
 
+__bpf_kfunc int bpf_sock_ops_enable_tx_tstamp(struct bpf_sock_ops_kern *skops,
+                                           u64 flags)
+{
+     struct sk_buff *skb;

net/core/filter.c __bpf_kfunc int bpf_sk_assign_tcp_reqsk(struct __sk_buff *s, struct sock *sk, · line 12118

Quoted 10 lines
net/core/filter.c +10 -0
+     struct sock *sk;
+
+     if (skops->op != BPF_SOCK_OPS_TS_SND_CB)
+             return -EOPNOTSUPP;
+
+     if (flags)
+             return -EINVAL;
+
+     skb = skops->skb;
+     sk = skops->sk;

nit: not used

Quoted 4 lines
Quoted 2 lines

BPF programs can use this in the future if necessary whereas the selftests don't reflect it.

How does defining a local variable help there?

Sorry, I didn't state it clearly. I meant you're right, for now it is useless, but for the future... Right, I will remove it.

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
net/core/filter.c +3 -0
+     skb_shinfo(skb)->tx_flags |= SKBTX_BPF;
+     TCP_SKB_CB(skb)->txstamp_ack |= TSTAMP_ACK_BPF;
+     skb_shinfo(skb)->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;
Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Can this overwrite the seqno previously calculated by tcp_tx_timestamp?

seqno? If you are referring to seqno, I don't think the BPF program is allowed to modify it because SOCK_OPS_GET_OR_SET_FIELD() only supports overwriting sk_txhash only. Please see sock_ops_convert_ctx_access().

I meant tskey

It 'overwrites' the tskey here if the socket timestamping feature is also on. But the seqno and len would not change during the gap between tcp_tx_timestamp() and bpf_sock_ops_enable_tx_tstamp(), I think? If the seq and len doesn't change, then the tskey will not be truly overwritten with a different value. Unless you probably expect to see this:

if (!skb_shinfo(skb)->tskey)

        skb_shinfo(skb)->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;

?

From my perspective, the final result is the same :)

Thanks,
Jason

author
#33 lore raw

PATCH v11 12/12 selftests/bpf: add simple bpf tests in the tx path for timestamping feature

In reply to Jason Xing

BPF program calculates a couple of latency deltas between each tx timestamping callbacks. It can be used in the real world to diagnose the kernel behaviour in the tx path.

Check the safety issues by accessing a few bpf calls in bpf_test_access_bpf_calls() which are implemented in the patch 3 and 4.

Check if the bpf timestamping can co-exist with socket timestamping.

There remains a few realistic things[1][2] to highlight:
1. in general a packet may pass through multiple qdiscs. For instance with bonding or tunnel virtual devices in the egress path.
2. packets may be resent, in which case an ACK might precede a repeat SCHED and SND.
3. erroneous or malicious peers may also just never send an ACK.

[1]: https://lore.kernel.org/all/[email protected]/
[2]: https://lore.kernel.org/all/[email protected]/

---
 .../bpf/prog_tests/net_timestamping.c         | 239 +++++++++++++++++
 .../selftests/bpf/progs/net_timestamping.c    | 248 ++++++++++++++++++
 2 files changed, 487 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/net_timestamping.c
 create mode 100644 tools/testing/selftests/bpf/progs/net_timestamping.c
tools/testing/selftests/bpf/prog_tests/net_timestamping.c new file +239 -0
new file mode 100644
index 000000000000..dbfd87499b6b
@@ -0,0 +1,239 @@
+#include <linux/net_tstamp.h>
+#include <sys/time.h>
+#include <linux/errqueue.h>
+#include "test_progs.h"
+#include "network_helpers.h"
+#include "net_timestamping.skel.h"
+
+#define CG_NAME "/net-timestamping-test"
+#define NSEC_PER_SEC    1000000000LL
+
+static const char addr4_str[] = "127.0.0.1";
+static const char addr6_str[] = "::1";
+static struct net_timestamping *skel;
+static const int cfg_payload_len = 30;
+static struct timespec usr_ts;
+static u64 delay_tolerance_nsec = 10000000000; /* 10 seconds */
+int SK_TS_SCHED;
+int SK_TS_TXSW;
+int SK_TS_ACK;
+
+static int64_t timespec_to_ns64(struct timespec *ts)
+{
+	return ts->tv_sec * NSEC_PER_SEC + ts->tv_nsec;
+}
+
+static void validate_key(int tskey, int tstype)
+{
+	static int expected_tskey = -1;
+
+	if (tstype == SCM_TSTAMP_SCHED)
+		expected_tskey = cfg_payload_len - 1;
+
+	ASSERT_EQ(expected_tskey, tskey, "tskey mismatch");
+
+	expected_tskey = tskey;
+}
+
+static void validate_timestamp(struct timespec *cur, struct timespec *prev)
+{
+	int64_t cur_ns, prev_ns;
+
+	cur_ns = timespec_to_ns64(cur);
+	prev_ns = timespec_to_ns64(prev);
+
+	ASSERT_LT(cur_ns - prev_ns, delay_tolerance_nsec, "latency");
+}
+
+static void test_socket_timestamp(struct scm_timestamping *tss, int tstype,
+				  int tskey)
+{
+	static struct timespec prev_ts;
+
+	validate_key(tskey, tstype);
+
+	switch (tstype) {
+	case SCM_TSTAMP_SCHED:
+		validate_timestamp(&tss->ts[0], &usr_ts);
+		SK_TS_SCHED += 1;
+		break;
+	case SCM_TSTAMP_SND:
+		validate_timestamp(&tss->ts[0], &prev_ts);
+		SK_TS_TXSW += 1;
+		break;
+	case SCM_TSTAMP_ACK:
+		validate_timestamp(&tss->ts[0], &prev_ts);
+		SK_TS_ACK += 1;
+		break;
+	}
+
+	prev_ts = tss->ts[0];
+}
+
+static void test_recv_errmsg_cmsg(struct msghdr *msg)
+{
+	struct sock_extended_err *serr = NULL;
+	struct scm_timestamping *tss = NULL;
+	struct cmsghdr *cm;
+
+	for (cm = CMSG_FIRSTHDR(msg);
+	     cm && cm->cmsg_len;
+	     cm = CMSG_NXTHDR(msg, cm)) {
+		if (cm->cmsg_level == SOL_SOCKET &&
+		    cm->cmsg_type == SCM_TIMESTAMPING) {
+			tss = (void *)CMSG_DATA(cm);
+		} else if ((cm->cmsg_level == SOL_IP &&
+			    cm->cmsg_type == IP_RECVERR) ||
+			   (cm->cmsg_level == SOL_IPV6 &&
+			    cm->cmsg_type == IPV6_RECVERR) ||
+			   (cm->cmsg_level == SOL_PACKET &&
+			    cm->cmsg_type == PACKET_TX_TIMESTAMP)) {
+			serr = (void *)CMSG_DATA(cm);
+			ASSERT_EQ(serr->ee_origin, SO_EE_ORIGIN_TIMESTAMPING,
+				  "cmsg type");
+		}
+
+		if (serr && tss)
+			test_socket_timestamp(tss, serr->ee_info,
+					      serr->ee_data);
+	}
+}
+
+static bool socket_recv_errmsg(int fd)
+{
+	static char ctrl[1024 /* overprovision*/];
+	char data[cfg_payload_len];
+	static struct msghdr msg;
+	struct iovec entry;
+	int n = 0;
+
+	memset(&msg, 0, sizeof(msg));
+	memset(&entry, 0, sizeof(entry));
+	memset(ctrl, 0, sizeof(ctrl));
+
+	entry.iov_base = data;
+	entry.iov_len = cfg_payload_len;
+	msg.msg_iov = &entry;
+	msg.msg_iovlen = 1;
+	msg.msg_name = NULL;
+	msg.msg_namelen = 0;
+	msg.msg_control = ctrl;
+	msg.msg_controllen = sizeof(ctrl);
+
+	n = recvmsg(fd, &msg, MSG_ERRQUEUE);
+	if (n == -1)
+		ASSERT_EQ(errno, EAGAIN, "recvmsg MSG_ERRQUEUE");
+
+	if (n >= 0)
+		test_recv_errmsg_cmsg(&msg);
+
+	return n == -1;
+}
+
+static void test_socket_timestamping(int fd)
+{
+	while (!socket_recv_errmsg(fd));
+
+	ASSERT_EQ(SK_TS_SCHED, 1, "SCM_TSTAMP_SCHED");
+	ASSERT_EQ(SK_TS_TXSW, 1, "SCM_TSTAMP_SND");
+	ASSERT_EQ(SK_TS_ACK, 1, "SCM_TSTAMP_ACK");
+
+	SK_TS_SCHED = 0;
+	SK_TS_TXSW = 0;
+	SK_TS_ACK = 0;
+}
+
+static void test_tcp(int family, bool enable_socket_timestamping)
+{
+	struct net_timestamping__bss *bss;
+	char buf[cfg_payload_len];
+	int sfd = -1, cfd = -1;
+	unsigned int sock_opt;
+	struct netns_obj *ns;
+	int cg_fd;
+	int ret;
+
+	cg_fd = test__join_cgroup(CG_NAME);
+	if (!ASSERT_OK_FD(cg_fd, "join cgroup"))
+		return;
+
+	ns = netns_new("net_timestamping_ns", true);
+	if (!ASSERT_OK_PTR(ns, "create ns"))
+		goto out;
+
+	skel = net_timestamping__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "open and load skel"))
+		goto out;
+
+	if (!ASSERT_OK(net_timestamping__attach(skel), "attach skel"))
+		goto out;
+
+	skel->links.skops_sockopt =
+		bpf_program__attach_cgroup(skel->progs.skops_sockopt, cg_fd);
+	if (!ASSERT_OK_PTR(skel->links.skops_sockopt, "attach cgroup"))
+		goto out;
+
+	bss = skel->bss;
+	memset(bss, 0, sizeof(*bss));
+
+	skel->bss->monitored_pid = getpid();
+
+	sfd = start_server(family, SOCK_STREAM,
+			   family == AF_INET6 ? addr6_str : addr4_str, 0, 0);
+	if (!ASSERT_OK_FD(sfd, "start_server"))
+		goto out;
+
+	cfd = connect_to_fd(sfd, 0);
+	if (!ASSERT_OK_FD(cfd, "connect_to_fd_server"))
+		goto out;
+
+	if (enable_socket_timestamping) {
+		sock_opt = SOF_TIMESTAMPING_SOFTWARE |
+			   SOF_TIMESTAMPING_OPT_ID |
+			   SOF_TIMESTAMPING_TX_SCHED |
+			   SOF_TIMESTAMPING_TX_SOFTWARE |
+			   SOF_TIMESTAMPING_TX_ACK;
+		ret = setsockopt(cfd, SOL_SOCKET, SO_TIMESTAMPING,
+				 (char *) &sock_opt, sizeof(sock_opt));
+		if (!ASSERT_OK(ret, "setsockopt SO_TIMESTAMPING"))
+			goto out;
+
+		ret = clock_gettime(CLOCK_REALTIME, &usr_ts);
+		if (!ASSERT_OK(ret, "get user time"))
+			goto out;
+	}
+
+	ret = write(cfd, buf, sizeof(buf));
+	if (!ASSERT_EQ(ret, sizeof(buf), "send to server"))
+		goto out;
+
+	if (enable_socket_timestamping)
+		test_socket_timestamping(cfd);
+
+	ASSERT_EQ(bss->nr_active, 1, "nr_active");
+	ASSERT_EQ(bss->nr_snd, 2, "nr_snd");
+	ASSERT_EQ(bss->nr_sched, 1, "nr_sched");
+	ASSERT_EQ(bss->nr_txsw, 1, "nr_txsw");
+	ASSERT_EQ(bss->nr_ack, 1, "nr_ack");
+
+out:
+	if (sfd >= 0)
+		close(sfd);
+	if (cfd >= 0)
+		close(cfd);
+	net_timestamping__destroy(skel);
+	netns_free(ns);
+	close(cg_fd);
+}
+
+void test_net_timestamping(void)
+{
+	if (test__start_subtest("INET4: bpf timestamping"))
+		test_tcp(AF_INET, false);
+	if (test__start_subtest("INET4: bpf and socket timestamping"))
+		test_tcp(AF_INET, true);
+	if (test__start_subtest("INET6: bpf timestamping"))
+		test_tcp(AF_INET6, false);
+	if (test__start_subtest("INET6: bpf and socket timestamping"))
+		test_tcp(AF_INET6, true);
+}
tools/testing/selftests/bpf/progs/net_timestamping.c new file +248 -0

248 lines not on this page · raw message

Signature · 1 line
2.43.5
#34 lore raw

Re: [PATCH bpf-next v11 12/12] selftests/bpf: add simple bpf tests in the tx path for timestamping feature

Quoted 14 lines · Jason Xing
tools/testing/selftests/bpf/prog_tests/net_timestamping.c new file +14 -0
+static void test_recv_errmsg_cmsg(struct msghdr *msg)
+{
+	struct sock_extended_err *serr = NULL;
+	struct scm_timestamping *tss = NULL;
+	struct cmsghdr *cm;
+
+	for (cm = CMSG_FIRSTHDR(msg);
+	     cm && cm->cmsg_len;
+	     cm = CMSG_NXTHDR(msg, cm)) {
+		if (cm->cmsg_level == SOL_SOCKET &&
+		    cm->cmsg_type == SCM_TIMESTAMPING) {
+			tss = (void *)CMSG_DATA(cm);
+		} else if ((cm->cmsg_level == SOL_IP &&
+			    cm->cmsg_type == IP_RECVERR) ||

tools/testing/selftests/bpf/prog_tests/net_timestamping.c line 96

Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/net_timestamping.c new file +10 -0
+			   (cm->cmsg_level == SOL_IPV6 &&
+			    cm->cmsg_type == IPV6_RECVERR) ||
+			   (cm->cmsg_level == SOL_PACKET &&
+			    cm->cmsg_type == PACKET_TX_TIMESTAMP)) {
+			serr = (void *)CMSG_DATA(cm);
+			ASSERT_EQ(serr->ee_origin, SO_EE_ORIGIN_TIMESTAMPING,
+				  "cmsg type");
+		}
+
+		if (serr && tss)

Regarding this check, does it need to reset both serr and tss to NULL before the next iteration? e.g. It can get >1 timestamps in one recvmsg(MSG_ERRQUEUE) ?

Quoted 5 lines
tools/testing/selftests/bpf/prog_tests/net_timestamping.c new file +5 -0
+			test_socket_timestamp(tss, serr->ee_info,
+					      serr->ee_data);
+	}
+}
+
author
#35 lore raw

Re: [PATCH bpf-next v11 12/12] selftests/bpf: add simple bpf tests in the tx path for timestamping feature

Quoted 21 lines · Martin KaFai Lau
Quoted 19 lines · Jason Xing
tools/testing/selftests/bpf/prog_tests/net_timestamping.c new file +19 -0
+static void test_recv_errmsg_cmsg(struct msghdr *msg)
+{
+     struct sock_extended_err *serr = NULL;
+     struct scm_timestamping *tss = NULL;
+     struct cmsghdr *cm;
+
+     for (cm = CMSG_FIRSTHDR(msg);
+          cm && cm->cmsg_len;
+          cm = CMSG_NXTHDR(msg, cm)) {
+             if (cm->cmsg_level == SOL_SOCKET &&
+                 cm->cmsg_type == SCM_TIMESTAMPING) {
+                     tss = (void *)CMSG_DATA(cm);
+             } else if ((cm->cmsg_level == SOL_IP &&
+                         cm->cmsg_type == IP_RECVERR) ||
+                        (cm->cmsg_level == SOL_IPV6 &&
+                         cm->cmsg_type == IPV6_RECVERR) ||
+                        (cm->cmsg_level == SOL_PACKET &&
+                         cm->cmsg_type == PACKET_TX_TIMESTAMP)) {
+                     serr = (void *)CMSG_DATA(cm);
Quoted 8 lines

tools/testing/selftests/bpf/prog_tests/net_timestamping.c line 96

Quoted 5 lines
tools/testing/selftests/bpf/prog_tests/net_timestamping.c new file +5 -0
+                     ASSERT_EQ(serr->ee_origin, SO_EE_ORIGIN_TIMESTAMPING,
+                               "cmsg type");
+             }
+
+             if (serr && tss)

Regarding this check, does it need to reset both serr and tss to NULL before the next iteration? e.g. It can get >1 timestamps in one recvmsg(MSG_ERRQUEUE) ?

If more than one skb carrying timestamping is received in one recvmsg from the error queue in this case, it means something goes wrong. So we don't expect that to happen.

Thanks,
Jason

Quoted 7 lines
Quoted 6 lines
tools/testing/selftests/bpf/prog_tests/net_timestamping.c new file +5 -0
+                     test_socket_timestamp(tss, serr->ee_info,
+                                           serr->ee_data);
+     }
+}
+
maintainer
#36 lore raw

Re: [PATCH bpf-next v11 12/12] selftests/bpf: add simple bpf tests in the tx path for timestamping feature

In reply to Jason Xing
Quoted 21 lines · Jason Xing

BPF program calculates a couple of latency deltas between each tx timestamping callbacks. It can be used in the real world to diagnose the kernel behaviour in the tx path.

Check the safety issues by accessing a few bpf calls in bpf_test_access_bpf_calls() which are implemented in the patch 3 and 4.

Check if the bpf timestamping can co-exist with socket timestamping.

There remains a few realistic things[1][2] to highlight:
1. in general a packet may pass through multiple qdiscs. For instance with bonding or tunnel virtual devices in the egress path.
2. packets may be resent, in which case an ACK might precede a repeat SCHED and SND.
3. erroneous or malicious peers may also just never send an ACK.

[1]: https://lore.kernel.org/all/[email protected]/
[2]: https://lore.kernel.org/all/[email protected]/

tools/testing/selftests/bpf/progs/net_timestamping.c line 103

Quoted 5 lines
tools/testing/selftests/bpf/progs/net_timestamping.c new file +5 -0
+/* In the timestamping callbacks, we're not allowed to call the following
+ * BPF CALLs for the safety concern. Return false if expected.
+ */
+static bool bpf_test_access_bpf_calls(struct bpf_sock_ops *skops,
+				      const struct sock *sk)

Is this parameter aligned with the one on the previous line?

This line was changed in the latest revision. Still looks off to me. But that may just be how the diff is presented in my vi.

tools/testing/selftests/bpf/progs/net_timestamping.c line 190

Quoted 3 lines
tools/testing/selftests/bpf/progs/net_timestamping.c new file +3 -0
+SEC("fentry/tcp_sendmsg_locked")
+int BPF_PROG(trace_tcp_sendmsg_locked, struct sock *sk, struct msghdr *msg,
+	     size_t size)

Same

author
#37 lore raw

Re: [PATCH bpf-next v11 12/12] selftests/bpf: add simple bpf tests in the tx path for timestamping feature

Quoted 31 lines · Willem de Bruijn
Quoted 21 lines · Jason Xing

BPF program calculates a couple of latency deltas between each tx timestamping callbacks. It can be used in the real world to diagnose the kernel behaviour in the tx path.

Check the safety issues by accessing a few bpf calls in bpf_test_access_bpf_calls() which are implemented in the patch 3 and 4.

Check if the bpf timestamping can co-exist with socket timestamping.

There remains a few realistic things[1][2] to highlight:
1. in general a packet may pass through multiple qdiscs. For instance with bonding or tunnel virtual devices in the egress path.
2. packets may be resent, in which case an ACK might precede a repeat SCHED and SND.
3. erroneous or malicious peers may also just never send an ACK.

[1]: https://lore.kernel.org/all/[email protected]/
[2]: https://lore.kernel.org/all/[email protected]/

tools/testing/selftests/bpf/progs/net_timestamping.c line 103

Quoted 5 lines
tools/testing/selftests/bpf/progs/net_timestamping.c new file +5 -0
+/* In the timestamping callbacks, we're not allowed to call the following
+ * BPF CALLs for the safety concern. Return false if expected.
+ */
+static bool bpf_test_access_bpf_calls(struct bpf_sock_ops *skops,
+                                   const struct sock *sk)

Is this parameter aligned with the one on the previous line?

Quoted 8 lines

This line was changed in the latest revision. Still looks off to me. But that may just be how the diff is presented in my vi.

tools/testing/selftests/bpf/progs/net_timestamping.c line 190

Quoted 3 lines
tools/testing/selftests/bpf/progs/net_timestamping.c new file +3 -0
+SEC("fentry/tcp_sendmsg_locked")
+int BPF_PROG(trace_tcp_sendmsg_locked, struct sock *sk, struct msghdr *msg,
+          size_t size)

Same

Weird. I cannot see the problem from my machine. The CI didn't warn me on this alignment either. Probably your vi went wrong? I'm not sure.

Thanks,
Jason

maintainer
#38 lore raw

Re: [PATCH bpf-next v11 12/12] selftests/bpf: add simple bpf tests in the tx path for timestamping feature

Quoted 36 lines · Jason Xing
Quoted 34 lines · Willem de Bruijn
Quoted 21 lines · Jason Xing

BPF program calculates a couple of latency deltas between each tx timestamping callbacks. It can be used in the real world to diagnose the kernel behaviour in the tx path.

Check the safety issues by accessing a few bpf calls in bpf_test_access_bpf_calls() which are implemented in the patch 3 and 4.

Check if the bpf timestamping can co-exist with socket timestamping.

There remains a few realistic things[1][2] to highlight:
1. in general a packet may pass through multiple qdiscs. For instance with bonding or tunnel virtual devices in the egress path.
2. packets may be resent, in which case an ACK might precede a repeat SCHED and SND.
3. erroneous or malicious peers may also just never send an ACK.

[1]: https://lore.kernel.org/all/[email protected]/
[2]: https://lore.kernel.org/all/[email protected]/

tools/testing/selftests/bpf/progs/net_timestamping.c line 103

Quoted 5 lines
tools/testing/selftests/bpf/progs/net_timestamping.c new file +5 -0
+/* In the timestamping callbacks, we're not allowed to call the following
+ * BPF CALLs for the safety concern. Return false if expected.
+ */
+static bool bpf_test_access_bpf_calls(struct bpf_sock_ops *skops,
+                                   const struct sock *sk)

Is this parameter aligned with the one on the previous line?

This line was changed in the latest revision. Still looks off to me. But that may just be how the diff is presented in my vi.

Quoted 8 lines
Quoted 5 lines

tools/testing/selftests/bpf/progs/net_timestamping.c line 190

Quoted 3 lines
tools/testing/selftests/bpf/progs/net_timestamping.c new file +3 -0
+SEC("fentry/tcp_sendmsg_locked")
+int BPF_PROG(trace_tcp_sendmsg_locked, struct sock *sk, struct msghdr *msg,
+          size_t size)

Same

Weird. I cannot see the problem from my machine. The CI didn't warn me on this alignment either. Probably your vi went wrong? I'm not sure.

If you double checked, I trust that it's just representation in my client.

#39 lore raw
In reply to Jason Xing
Quoted 22 lines · Jason Xing

"Timestamping is key to debugging network stack latency. With SO_TIMESTAMPING, bugs that are otherwise incorrectly assumed to be network issues can be attributed to the kernel." This is extracted from the talk "SO_TIMESTAMPING: Powering Fleetwide RPC Monitoring" addressed by Willem de Bruijn at netdevconf 0x17).

There are a few areas that need optimization with the consideration of easier use and less performance impact, which I highlighted and mainly discussed at netconf 2024 with Willem de Bruijn and John Fastabend:
uAPI compatibility, extra system call overhead, and the need for application modification. I initially managed to solve these issues by writing a kernel module that hooks various key functions. However, this approach is not suitable for the next kernel release. Therefore, a BPF extension was proposed. During recent period, Martin KaFai Lau provides invaluable suggestions about BPF along the way. Many thanks here!

This series adds the BPF networking timestamping infrastructure through reusing most of the tx timestamping callback that is currently enabled by the SO_TIMESTAMPING.. This series also adds TX timestamping support for TCP. The RX timestamping and UDP support will be added in the future.

Quoted 6 lines

---
v10

1. rename hwts with hwtimestamp
2. use subtest and pid filter in selftest
3. use 'tcb->txstamp_ack |= TSTAMP_ACK_SK'

Overall looks good. I only have two minor comments.

Willem, can you also take another look and ack if it looks good to you? Thanks.