Fixed Spelling error
PATCH 1/1 Fixed Spelling error
Documentation/video4linux/hauppauge-wintv-cx88-ir.txt +1 -1
@@ -30,7 +30,7 @@ provide for a handler) GP_SAMPLE register is at 0x35C058 Bits are then right shifted into the GP_SAMPLE register at the specified -rate; you get an interrupt when a full DWORD is recieved. +rate; you get an interrupt when a full DWORD is received. You need to recover the actual RC5 bits out of the (oversampled) IR sensor bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
Signature · 1 line
2.34.1
Quoted 17 lines · Sumya Hoque
Documentation/video4linux/hauppauge-wintv-cx88-ir.txt +1
-1@@ -30,7 +30,7 @@ provide for a handler) GP_SAMPLE register is at 0x35C058 Bits are then right shifted into the GP_SAMPLE register at the specified -rate; you get an interrupt when a full DWORD is recieved. +rate; you get an interrupt when a full DWORD is received. You need to recover the actual RC5 bits out of the (oversampled) IR sensor bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.Signature · 1 line
2.34.1
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- Your patch does not have a Signed-off-by: line. Please read the kernel file, Documentation/process/submitting-patches.rst and resend it after adding that line. Note, the line needs to be in the body of the email, before the patch, not at the bottom of the patch or in the email signature.
- You did not specify a description of why the patch is needed, or possibly, any description at all, in the email body. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/process/submitting-patches.rst for what is needed in order to properly describe the change.
- You did not write a descriptive Subject: for the patch, allowing Greg, and everyone else, to know what this patch is all about. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/process/submitting-patches.rst for what a proper
Subject: line should look like.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot