General updates and two new drivers for HiSilicon Uncore PMU
Subsystems (3)
cover General updates and two new drivers for HiSilicon Uncore PMU
From: Yicong Yang <[email protected]>
Support new version of DDRC/SLLC PMU identified with updated ACPI HID and register definition. In order to support this, we do a preliminary refactor to initialize device of each version by using driver data of each HID rather than checking the version. This will also make the driver easier to maintain and extend, since only the HID specific information along with the new HID will be added to support the new version without touching the common logic.
Two new Uncore PMU drivers is also added to support the monitoring the events of the system bus (by NoC PMU) and the DVM opertaions (by MN PMU).
Junhao He (7):
drivers/perf: hisi: Extend struct hisi_pmu_dev_info drivers/perf: hisi: Simplify the probe process for each DDRC version drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU
information
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver drivers/perf: hisi: Relax the event number check of v2 PMUs drivers/perf: hisi: Add support for HiSilicon MN PMU driver
Yicong Yang (2):
drivers/perf: hisi: Support PMUs with no interrupt drivers/perf: hisi: Add support for HiSilicon NoC PMU
Documentation/admin-guide/perf/hisi-pmu.rst | 11 + drivers/perf/hisilicon/Makefile | 3 +- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 354 ++++++++-------- drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 7 +- drivers/perf/hisilicon/hisi_uncore_mn_pmu.c | 355 ++++++++++++++++ drivers/perf/hisilicon/hisi_uncore_noc_pmu.c | 391 ++++++++++++++++++ drivers/perf/hisilicon/hisi_uncore_pa_pmu.c | 2 +- drivers/perf/hisilicon/hisi_uncore_pmu.c | 11 +- drivers/perf/hisilicon/hisi_uncore_pmu.h | 2 + drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 234 ++++++++--- 10 files changed, 1104 insertions(+), 266 deletions(-) create mode 100644 drivers/perf/hisilicon/hisi_uncore_mn_pmu.c create mode 100644 drivers/perf/hisilicon/hisi_uncore_noc_pmu.c
Signature · 1 line
2.24.0
PATCH 1/9 drivers/perf: hisi: Extend struct hisi_pmu_dev_info
From: Junhao He <[email protected]>
The counter bits and event range may differ from versions of a certain uncore PMU. Make this device specific information into struct hisi_pmu_dev_info. This will help to simplify the initialization process by using a list of struct hisi_pmu_dev_info rather than checking the version.
--- drivers/perf/hisilicon/hisi_uncore_pmu.h | 2 ++ 1 file changed, 2 insertions(+)
drivers/perf/hisilicon/hisi_uncore_pmu.h +2 -0
@@ -72,6 +72,8 @@ struct hisi_uncore_ops {struct hisi_pmu_dev_info {const char *name;const struct attribute_group **attr_groups; +u32 counter_bits; +u32 check_event;void *private; };
Signature · 1 line
2.24.0
Will Deacon
maintainerRe: [PATCH 1/9] drivers/perf: hisi: Extend struct hisi_pmu_dev_info
Quoted 19 lines · Yicong Yang
From: Junhao He <[email protected]>
The counter bits and event range may differ from versions of a certain uncore PMU. Make this device specific information into struct
hisi_pmu_dev_info. This will help to simplify the initialization process by using a list of structhisi_pmu_dev_inforather than checking the version.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/hisilicon/hisi_uncore_pmu.h | 2 ++ 1 file changed, 2 insertions(+)drivers/perf/hisilicon/hisi_uncore_pmu.h +0
-0
drivers/perf/hisilicon/hisi_uncore_pmu.h struct hisi_uncore_ops { · line 78
Quoted 7 lines
drivers/perf/hisilicon/hisi_uncore_pmu.h +2
-0@@ -72,6 +72,8 @@ struct hisi_uncore_ops {struct hisi_pmu_dev_info {const char *name;const struct attribute_group **attr_groups; +u32 counter_bits; +u32 check_event;void *private; };
This doesn't really do anything on its own; please just fold it into the patch where the new fields are used.
Will
Re: [PATCH 1/9] drivers/perf: hisi: Extend struct hisi_pmu_dev_info
Quoted 15 lines · Will Deacon
Quoted 14 lines · Yicong Yang
From: Junhao He <[email protected]>
The counter bits and event range may differ from versions of a certain uncore PMU. Make this device specific information into struct
hisi_pmu_dev_info. This will help to simplify the initialization process by using a list of structhisi_pmu_dev_inforather than checking the version.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/hisilicon/hisi_uncore_pmu.h | 2 ++ 1 file changed, 2 insertions(+)
Quoted 16 lines
drivers/perf/hisilicon/hisi_uncore_pmu.h struct hisi_uncore_ops { · line 78
Quoted 12 lines
drivers/perf/hisilicon/hisi_uncore_pmu.h +2
-0@@ -72,6 +72,8 @@ struct hisi_uncore_ops {struct hisi_pmu_dev_info {const char *name;const struct attribute_group **attr_groups; +u32 counter_bits; +u32 check_event;void *private; };This doesn't really do anything on its own; please just fold it into the patch where the new fields are used.
sure, will make this into the following patch.
Thanks.
Re: [PATCH 1/9] drivers/perf: hisi: Extend struct hisi_pmu_dev_info
Quoted 16 lines · On Mon, 3 Mar 2025 22:43:35 +0800 Yicong Yang <[email protected]> wrote:
Quoted 15 lines · Will Deacon
Quoted 14 lines · Yicong Yang
From: Junhao He <[email protected]>
The counter bits and event range may differ from versions of a certain uncore PMU. Make this device specific information into struct
hisi_pmu_dev_info. This will help to simplify the initialization process by using a list of structhisi_pmu_dev_inforather than checking the version.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/hisilicon/hisi_uncore_pmu.h | 2 ++ 1 file changed, 2 insertions(+)
Quoted 10 lines
Quoted 10 lines
drivers/perf/hisilicon/hisi_uncore_pmu.h struct hisi_uncore_ops { · line 76
Quoted 10 lines
drivers/perf/hisilicon/hisi_uncore_pmu.h +2
-0@@ -72,6 +72,8 @@ struct hisi_uncore_ops {struct hisi_pmu_dev_info {const char *name;const struct attribute_group **attr_groups; +u32 counter_bits; +u32 check_event;
This name is a little confusing. Maybe nr_events or similar?
Quoted 11 lines
Quoted 6 lines
drivers/perf/hisilicon/hisi_uncore_pmu.h struct hisi_uncore_ops { · line 78
Quoted 2 lines
drivers/perf/hisilicon/hisi_uncore_pmu.h +0
-0void *private; };This doesn't really do anything on its own; please just fold it into the patch where the new fields are used.
sure, will make this into the following patch.
Thanks.
PATCH 2/9 drivers/perf: hisi: Simplify the probe process for each DDRC version
In reply to Yicong YangFrom: Junhao He <[email protected]>
Version 1 and 2 of DDRC PMU also use different HID. Make use of struct acpi_device_id::driver_data for version specific information rather than judge the version register. This will help to simplify the probe process and also a bit easier for extension.
--- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 328 ++++++++---------- 1 file changed, 140 insertions(+), 188 deletions(-)
drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +140 -188
@@ -50,6 +50,10 @@#define DDRC_V1_NR_EVENTS 0x7#define DDRC_V2_NR_EVENTS 0x90 +#define DDRC_EVENT_CNTn (base, n) ((base) + (n) * 8) +#define DDRC_EVENT_TYPEn (base, n) ((base) + (n) * 4) +#define DDRC_UNIMPLEMENTED_REG GENMASK(31, 0) +/* * For PMU v1, there are eight-events and every event has been mapped * to fixed-purpose counters which register offset is not consistent.
@@ -63,47 +67,37 @@ static const u32 ddrc_reg_off[] = {DDRC_PRE_CMD ,DDRC_ACT_CMD ,DDRC_RNK_CHG ,DDRC_RW_CHG }; -/* -* Select the counter register offset using the counter index. -* In PMU v1, there are no programmable counter, the count -* is read form the statistics counter register itself. -*/ -static u32 hisi_ddrc_pmu_v1_get_counter_offset (int cntr_idx) -{ -return ddrc_reg_off[cntr_idx]; -} - -static u32 hisi_ddrc_pmu_v2_get_counter_offset (int cntr_idx) -{ -return DDRC_V2_EVENT_CNT + cntr_idx *8 ; -} +struct hisi_ddrc_pmu_regs { +u32 event_cnt; +u32 event_ctrl; +u32 event_type; +u32 perf_ctrl; +u32 perf_ctrl_en; +u32 int_mask; +u32 int_clear; +u32 int_status; +}; -static u64 hisi_ddrc_pmu_v1_read_counter (struct hisi_pmu *ddrc_pmu, +static u64 hisi_ddrc_pmu_read_counter (struct hisi_pmu *ddrc_pmu,struct hw_perf_event *hwc) { -return readl (ddrc_pmu->base + -hisi_ddrc_pmu_v1_get_counter_offset (hwc->idx)); -} +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private; -static void hisi_ddrc_pmu_v1_write_counter (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc,u64 val) -{ -writel ((u32 )val, - ddrc_pmu->base +hisi_ddrc_pmu_v1_get_counter_offset (hwc->idx)); -} +if (regs->event_cnt ==DDRC_UNIMPLEMENTED_REG ) +return readl (ddrc_pmu->base + ddrc_reg_off[hwc->idx]); -static u64 hisi_ddrc_pmu_v2_read_counter (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc) -{ -return readq (ddrc_pmu->base + -hisi_ddrc_pmu_v2_get_counter_offset (hwc->idx)); +return readq (ddrc_pmu->base +DDRC_EVENT_CNTn (regs->event_cnt, hwc->idx)); } -static void hisi_ddrc_pmu_v2_write_counter (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc,u64 val) +static void hisi_ddrc_pmu_write_counter (struct hisi_pmu *ddrc_pmu, +struct hw_perf_event *hwc,u64 val) { -writeq (val, - ddrc_pmu->base +hisi_ddrc_pmu_v2_get_counter_offset (hwc->idx)); +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private; + +if (regs->event_cnt ==DDRC_UNIMPLEMENTED_REG ) +writel ((u32 )val, ddrc_pmu->base + ddrc_reg_off[hwc->idx]); +else +writeq (val, ddrc_pmu->base +DDRC_EVENT_CNTn (regs->event_cnt, hwc->idx)); }/*
@@ -114,54 +108,12 @@ static void hisi_ddrc_pmu_v2_write_counter(struct hisi_pmu *ddrc_pmu,static void hisi_ddrc_pmu_write_evtype (struct hisi_pmu *ddrc_pmu,int idx,u32 type) { -u32 offset; - -if (ddrc_pmu->identifier >=HISI_PMU_V2 ) { - offset =DDRC_V2_EVENT_TYPE +4 * idx; -writel (type, ddrc_pmu->base + offset); - } -} - -static void hisi_ddrc_pmu_v1_start_counters (struct hisi_pmu *ddrc_pmu) -{ -u32 val; +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private; -/* Set perf_enable in DDRC_PERF_CTRL to start event counting */ - val =readl (ddrc_pmu->base +DDRC_PERF_CTRL ); - val |=DDRC_V1_PERF_CTRL_EN ; -writel (val, ddrc_pmu->base +DDRC_PERF_CTRL ); -} +if (regs->event_type ==DDRC_UNIMPLEMENTED_REG ) +return ; -static void hisi_ddrc_pmu_v1_stop_counters (struct hisi_pmu *ddrc_pmu) -{ -u32 val; - -/* Clear perf_enable in DDRC_PERF_CTRL to stop event counting */ - val =readl (ddrc_pmu->base +DDRC_PERF_CTRL ); - val &= ~DDRC_V1_PERF_CTRL_EN ; -writel (val, ddrc_pmu->base +DDRC_PERF_CTRL ); -} - -static void hisi_ddrc_pmu_v1_enable_counter (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc) -{ -u32 val; - -/* Set counter index(event code) in DDRC_EVENT_CTRL register */ - val =readl (ddrc_pmu->base +DDRC_EVENT_CTRL ); - val |= (1 <<GET_DDRC_EVENTID (hwc)); -writel (val, ddrc_pmu->base +DDRC_EVENT_CTRL ); -} - -static void hisi_ddrc_pmu_v1_disable_counter (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc) -{ -u32 val; - -/* Clear counter index(event code) in DDRC_EVENT_CTRL register */ - val =readl (ddrc_pmu->base +DDRC_EVENT_CTRL ); - val &= ~(1 <<GET_DDRC_EVENTID (hwc)); -writel (val, ddrc_pmu->base +DDRC_EVENT_CTRL ); +writel (type, ddrc_pmu->base +DDRC_EVENT_TYPEn (regs->event_type, idx)); }static int hisi_ddrc_pmu_v1_get_event_idx (struct perf_event *event)
@@ -180,120 +132,96 @@ static int hisi_ddrc_pmu_v1_get_event_idx(struct perf_event *event)return idx; } -static int hisi_ddrc_pmu_v2_get_event_idx (struct perf_event *event) +static int hisi_ddrc_pmu_get_event_idx (struct perf_event *event) { +struct hisi_pmu *ddrc_pmu =to_hisi_pmu (event->pmu); +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private; + +if (regs->event_type ==DDRC_UNIMPLEMENTED_REG ) +return hisi_ddrc_pmu_v1_get_event_idx (event); +return hisi_uncore_pmu_get_event_idx (event); } -static void hisi_ddrc_pmu_v2_start_counters (struct hisi_pmu *ddrc_pmu) +static void hisi_ddrc_pmu_start_counters (struct hisi_pmu *ddrc_pmu) { +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private;u32 val; - val =readl (ddrc_pmu->base +DDRC_V2_PERF_CTRL ); - val |=DDRC_V2_PERF_CTRL_EN ; -writel (val, ddrc_pmu->base +DDRC_V2_PERF_CTRL ); + val =readl (ddrc_pmu->base + regs->perf_ctrl); + val |= regs->perf_ctrl_en; +writel (val, ddrc_pmu->base + regs->perf_ctrl); } -static void hisi_ddrc_pmu_v2_stop_counters (struct hisi_pmu *ddrc_pmu) +static void hisi_ddrc_pmu_stop_counters (struct hisi_pmu *ddrc_pmu) { +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private;u32 val; - val =readl (ddrc_pmu->base +DDRC_V2_PERF_CTRL ); - val &= ~DDRC_V2_PERF_CTRL_EN ; -writel (val, ddrc_pmu->base +DDRC_V2_PERF_CTRL ); + val =readl (ddrc_pmu->base + regs->perf_ctrl); + val &= ~regs->perf_ctrl_en; +writel (val, ddrc_pmu->base + regs->perf_ctrl); } -static void hisi_ddrc_pmu_v2_enable_counter (struct hisi_pmu *ddrc_pmu, +static void hisi_ddrc_pmu_enable_counter (struct hisi_pmu *ddrc_pmu,struct hw_perf_event *hwc) { +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private;u32 val; - val =readl (ddrc_pmu->base +DDRC_V2_EVENT_CTRL ); - val |=1 << hwc->idx; -writel (val, ddrc_pmu->base +DDRC_V2_EVENT_CTRL ); + val =readl (ddrc_pmu->base + regs->event_ctrl); + val |=BIT_ULL (hwc->idx); +writel (val, ddrc_pmu->base + regs->event_ctrl); } -static void hisi_ddrc_pmu_v2_disable_counter (struct hisi_pmu *ddrc_pmu, +static void hisi_ddrc_pmu_disable_counter (struct hisi_pmu *ddrc_pmu,struct hw_perf_event *hwc) { +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private;u32 val; - val =readl (ddrc_pmu->base +DDRC_V2_EVENT_CTRL ); - val &= ~(1 << hwc->idx); -writel (val, ddrc_pmu->base +DDRC_V2_EVENT_CTRL ); -} - -static void hisi_ddrc_pmu_v1_enable_counter_int (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc) -{ -u32 val; - -/* Write 0 to enable interrupt */ - val =readl (ddrc_pmu->base +DDRC_INT_MASK ); - val &= ~(1 << hwc->idx); -writel (val, ddrc_pmu->base +DDRC_INT_MASK ); -} - -static void hisi_ddrc_pmu_v1_disable_counter_int (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc) -{ -u32 val; - -/* Write 1 to mask interrupt */ - val =readl (ddrc_pmu->base +DDRC_INT_MASK ); - val |=1 << hwc->idx; -writel (val, ddrc_pmu->base +DDRC_INT_MASK ); + val =readl (ddrc_pmu->base + regs->event_ctrl); + val &= ~BIT_ULL (hwc->idx); +writel (val, ddrc_pmu->base + regs->event_ctrl); } -static void hisi_ddrc_pmu_v2_enable_counter_int (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc) +static void hisi_ddrc_pmu_enable_counter_int (struct hisi_pmu *ddrc_pmu, +struct hw_perf_event *hwc) { +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private;u32 val; - val =readl (ddrc_pmu->base +DDRC_V2_INT_MASK ); - val &= ~(1 << hwc->idx); -writel (val, ddrc_pmu->base +DDRC_V2_INT_MASK ); + val =readl (ddrc_pmu->base + regs->int_mask); + val &= ~BIT_ULL (hwc->idx); +writel (val, ddrc_pmu->base + regs->int_mask); } -static void hisi_ddrc_pmu_v2_disable_counter_int (struct hisi_pmu *ddrc_pmu, -struct hw_perf_event *hwc) +static void hisi_ddrc_pmu_disable_counter_int (struct hisi_pmu *ddrc_pmu, +struct hw_perf_event *hwc) { +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private;u32 val; - val =readl (ddrc_pmu->base +DDRC_V2_INT_MASK ); - val |=1 << hwc->idx; -writel (val, ddrc_pmu->base +DDRC_V2_INT_MASK ); + val =readl (ddrc_pmu->base + regs->int_mask); + val |=BIT_ULL (hwc->idx); +writel (val, ddrc_pmu->base + regs->int_mask); } -static u32 hisi_ddrc_pmu_v1_get_int_status (struct hisi_pmu *ddrc_pmu) +static u32 hisi_ddrc_pmu_get_int_status (struct hisi_pmu *ddrc_pmu) { -return readl (ddrc_pmu->base +DDRC_INT_STATUS ); -} +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private; -static void hisi_ddrc_pmu_v1_clear_int_status (struct hisi_pmu *ddrc_pmu, -int idx) -{ -writel (1 << idx, ddrc_pmu->base +DDRC_INT_CLEAR ); +return readl (ddrc_pmu->base + regs->int_status); } -static u32 hisi_ddrc_pmu_v2_get_int_status (struct hisi_pmu *ddrc_pmu) +static void hisi_ddrc_pmu_clear_int_status (struct hisi_pmu *ddrc_pmu, +int idx) { -return readl (ddrc_pmu->base +DDRC_V2_INT_STATUS ); -} +struct hisi_ddrc_pmu_regs *regs = ddrc_pmu->dev_info->private; -static void hisi_ddrc_pmu_v2_clear_int_status (struct hisi_pmu *ddrc_pmu, -int idx) -{ -writel (1 << idx, ddrc_pmu->base +DDRC_V2_INT_CLEAR ); +writel (1 << idx, ddrc_pmu->base + regs->int_clear); } -static const struct acpi_device_id hisi_ddrc_pmu_acpi_match[] = { - {"HISI0233" , }, - {"HISI0234" , }, - {} -}; -MODULE_DEVICE_TABLE (acpi, hisi_ddrc_pmu_acpi_match); -static int hisi_ddrc_pmu_init_data (struct platform_device *pdev,struct hisi_pmu *ddrc_pmu) {
@@ -314,6 +242,10 @@ static int hisi_ddrc_pmu_init_data(struct platform_device *pdev,return -EINVAL ; } + ddrc_pmu->dev_info =device_get_match_data (&pdev->dev); +if (!ddrc_pmu->dev_info) +return -ENODEV ; + ddrc_pmu->base =devm_platform_ioremap_resource (pdev,0 );if (IS_ERR (ddrc_pmu->base)) {dev_err (&pdev->dev,"ioremap failed for ddrc_pmu resource\n" );
@@ -396,34 +328,19 @@ static const struct attribute_group *hisi_ddrc_pmu_v2_attr_groups[] = {NULL }; -static const struct hisi_uncore_ops hisi_uncore_ddrc_v1_ops = { +static const struct hisi_uncore_ops hisi_uncore_ddrc_ops = { .write_evtype = hisi_ddrc_pmu_write_evtype, - .get_event_idx = hisi_ddrc_pmu_v1_get_event_idx, - .start_counters = hisi_ddrc_pmu_v1_start_counters, - .stop_counters = hisi_ddrc_pmu_v1_stop_counters, - .enable_counter = hisi_ddrc_pmu_v1_enable_counter, - .disable_counter = hisi_ddrc_pmu_v1_disable_counter, - .enable_counter_int = hisi_ddrc_pmu_v1_enable_counter_int, - .disable_counter_int = hisi_ddrc_pmu_v1_disable_counter_int, - .write_counter = hisi_ddrc_pmu_v1_write_counter, - .read_counter = hisi_ddrc_pmu_v1_read_counter, - .get_int_status = hisi_ddrc_pmu_v1_get_int_status, - .clear_int_status = hisi_ddrc_pmu_v1_clear_int_status, -}; - -static const struct hisi_uncore_ops hisi_uncore_ddrc_v2_ops = { - .write_evtype = hisi_ddrc_pmu_write_evtype, - .get_event_idx = hisi_ddrc_pmu_v2_get_event_idx, - .start_counters = hisi_ddrc_pmu_v2_start_counters, - .stop_counters = hisi_ddrc_pmu_v2_stop_counters, - .enable_counter = hisi_ddrc_pmu_v2_enable_counter, - .disable_counter = hisi_ddrc_pmu_v2_disable_counter, - .enable_counter_int = hisi_ddrc_pmu_v2_enable_counter_int, - .disable_counter_int = hisi_ddrc_pmu_v2_disable_counter_int, - .write_counter = hisi_ddrc_pmu_v2_write_counter, - .read_counter = hisi_ddrc_pmu_v2_read_counter, - .get_int_status = hisi_ddrc_pmu_v2_get_int_status, - .clear_int_status = hisi_ddrc_pmu_v2_clear_int_status, + .get_event_idx = hisi_ddrc_pmu_get_event_idx, + .start_counters = hisi_ddrc_pmu_start_counters, + .stop_counters = hisi_ddrc_pmu_stop_counters, + .enable_counter = hisi_ddrc_pmu_enable_counter, + .disable_counter = hisi_ddrc_pmu_disable_counter, + .enable_counter_int = hisi_ddrc_pmu_enable_counter_int, + .disable_counter_int = hisi_ddrc_pmu_disable_counter_int, + .write_counter = hisi_ddrc_pmu_write_counter, + .read_counter = hisi_ddrc_pmu_read_counter, + .get_int_status = hisi_ddrc_pmu_get_int_status, + .clear_int_status = hisi_ddrc_pmu_clear_int_status, }; static int hisi_ddrc_pmu_dev_probe(struct platform_device *pdev,
@@ -439,18 +356,10 @@ static int hisi_ddrc_pmu_dev_probe(struct platform_device *pdev,if (ret)return ret; -if (ddrc_pmu->identifier >=HISI_PMU_V2 ) { - ddrc_pmu->counter_bits =48 ; - ddrc_pmu->check_event =DDRC_V2_NR_EVENTS ; - ddrc_pmu->pmu_events.attr_groups = hisi_ddrc_pmu_v2_attr_groups; - ddrc_pmu->ops = &hisi_uncore_ddrc_v2_ops; - }else { - ddrc_pmu->counter_bits =32 ; - ddrc_pmu->check_event =DDRC_V1_NR_EVENTS ; - ddrc_pmu->pmu_events.attr_groups = hisi_ddrc_pmu_v1_attr_groups; - ddrc_pmu->ops = &hisi_uncore_ddrc_v1_ops; - } - + ddrc_pmu->pmu_events.attr_groups = ddrc_pmu->dev_info->attr_groups; + ddrc_pmu->counter_bits = ddrc_pmu->dev_info->counter_bits; + ddrc_pmu->check_event = ddrc_pmu->dev_info->check_event; + ddrc_pmu->ops = &hisi_uncore_ddrc_ops; ddrc_pmu->num_counters =DDRC_NR_COUNTERS ; ddrc_pmu->dev = &pdev->dev; ddrc_pmu->on_cpu =-1 ;
@@ -515,6 +424,49 @@ static void hisi_ddrc_pmu_remove(struct platform_device *pdev) &ddrc_pmu->node); } +static struct hisi_ddrc_pmu_regs hisi_ddrc_v1_pmu_regs = { + .event_cnt =DDRC_UNIMPLEMENTED_REG , + .event_ctrl =DDRC_EVENT_CTRL , + .event_type =DDRC_UNIMPLEMENTED_REG , + .perf_ctrl =DDRC_PERF_CTRL , + .perf_ctrl_en =DDRC_V1_PERF_CTRL_EN , + .int_mask =DDRC_INT_MASK , + .int_clear =DDRC_INT_CLEAR , + .int_status =DDRC_INT_STATUS , +}; + +static const struct hisi_pmu_dev_info hisi_ddrc_v1 = { + .counter_bits =32 , + .check_event =DDRC_V1_NR_EVENTS , + .attr_groups = hisi_ddrc_pmu_v1_attr_groups, + .private = &hisi_ddrc_v1_pmu_regs, +}; + +static struct hisi_ddrc_pmu_regs hisi_ddrc_v2_pmu_regs = { + .event_cnt =DDRC_V2_EVENT_CNT , + .event_ctrl =DDRC_V2_EVENT_CTRL , + .event_type =DDRC_V2_EVENT_TYPE , + .perf_ctrl =DDRC_V2_PERF_CTRL , + .perf_ctrl_en =DDRC_V2_PERF_CTRL_EN , + .int_mask =DDRC_V2_INT_MASK , + .int_clear =DDRC_V2_INT_CLEAR , + .int_status =DDRC_V2_INT_STATUS , +}; + +static const struct hisi_pmu_dev_info hisi_ddrc_v2 = { + .counter_bits =48 , + .check_event =DDRC_V2_NR_EVENTS , + .attr_groups = hisi_ddrc_pmu_v2_attr_groups, + .private = &hisi_ddrc_v2_pmu_regs, +}; + +static const struct acpi_device_id hisi_ddrc_pmu_acpi_match[] = { + {"HISI0233" , (kernel_ulong_t)&hisi_ddrc_v1 }, + {"HISI0234" , (kernel_ulong_t)&hisi_ddrc_v2 }, + {} +}; +MODULE_DEVICE_TABLE (acpi, hisi_ddrc_pmu_acpi_match); +static struct platform_driver hisi_ddrc_pmu_driver = { .driver = { .name ="hisi_ddrc_pmu" ,
Signature · 1 line
2.24.0
Re: [PATCH 2/9] drivers/perf: hisi: Simplify the probe process for each DDRC version
Quoted 9 lines · On Tue, 18 Feb 2025 17:19:53 +0800 Yicong Yang <[email protected]> wrote:
From: Junhao He <[email protected]>
Version 1 and 2 of DDRC PMU also use different HID. Make use of struct
acpi_device_id::driver_datafor version specific information rather than judge the version register. This will help to simplify the probe process and also a bit easier for extension.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>
Looks good to me. Looking at this I can see the check_reg naming is an existing thing so maybe leave that alone for now and consider renaming as a future improvement in readability.
PATCH 3/9 drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
In reply to Yicong YangFrom: Junhao He <[email protected]>
HiSilicon DDRC v3 PMU has the different interrupt register offset compared to the v2. Add device information of v3 PMU with ACPI HID HISI0235.
--- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +24 -0
@@ -43,6 +43,11 @@#define DDRC_V2_EVENT_TYPE 0xe74#define DDRC_V2_PERF_CTRL 0xeA0 +/* DDRC interrupt registers definition in v3 */ +#define DDRC_V3_INT_MASK 0x534 +#define DDRC_V3_INT_STATUS 0x538 +#define DDRC_V3_INT_CLEAR 0x53C +/* DDRC has 8-counters */ #define DDRC_NR_COUNTERS 0x8#define DDRC_V1_PERF_CTRL_EN 0x2
@@ -460,9 +465,28 @@ static const struct hisi_pmu_dev_info hisi_ddrc_v2 = { .private = &hisi_ddrc_v2_pmu_regs, }; +static struct hisi_ddrc_pmu_regs hisi_ddrc_v3_pmu_regs = { + .event_cnt =DDRC_V2_EVENT_CNT , + .event_ctrl =DDRC_V2_EVENT_CTRL , + .event_type =DDRC_V2_EVENT_TYPE , + .perf_ctrl =DDRC_V2_PERF_CTRL , + .perf_ctrl_en =DDRC_V2_PERF_CTRL_EN , + .int_mask =DDRC_V3_INT_MASK , + .int_clear =DDRC_V3_INT_CLEAR , + .int_status =DDRC_V3_INT_STATUS , +}; + +static const struct hisi_pmu_dev_info hisi_ddrc_v3 = { + .counter_bits =48 , + .check_event =DDRC_V2_NR_EVENTS , + .attr_groups = hisi_ddrc_pmu_v2_attr_groups, + .private = &hisi_ddrc_v3_pmu_regs, +}; +static const struct acpi_device_id hisi_ddrc_pmu_acpi_match[] = { {"HISI0233" , (kernel_ulong_t)&hisi_ddrc_v1 }, {"HISI0234" , (kernel_ulong_t)&hisi_ddrc_v2 }, + {"HISI0235" , (kernel_ulong_t)&hisi_ddrc_v3 }, {} };MODULE_DEVICE_TABLE (acpi, hisi_ddrc_pmu_acpi_match);
Signature · 1 line
2.24.0
Re: [PATCH 3/9] drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
Quoted 8 lines · On Tue, 18 Feb 2025 17:19:54 +0800 Yicong Yang <[email protected]> wrote:
From: Junhao He <[email protected]>
HiSilicon DDRC v3 PMU has the different interrupt register offset compared to the v2. Add device information of v3 PMU with ACPI HID HISI0235.
Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>
PATCH 4/9 drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
In reply to Yicong YangFrom: Junhao He <[email protected]>
Make use of struct acpi_device_id::driver_data for version specific information rather than judge the version register. This will help to simplify the probe process and also a bit easier for extension.
Factor out SLLC register definition to struct hisi_sllc_pmu_regs. No functional changes intended.
--- drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 191 ++++++++++++------ 1 file changed, 125 insertions(+), 66 deletions(-)
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +125 -66
@@ -36,11 +36,14 @@#define SLLC_SRCID_NONE 0x0#define SLLC_TGTID_EN BIT(5)#define SLLC_TGTID_NONE 0x0 -#define SLLC_TGTID_MIN_SHIFT 1 -#define SLLC_TGTID_MAX_SHIFT 12 -#define SLLC_SRCID_CMD_SHIFT 1 -#define SLLC_SRCID_MSK_SHIFT 12 +#define SLLC_TGTID_MIN_MSK GENMASK(11, 1) +#define SLLC_TGTID_MAX_MSK GENMASK(22, 12) +#define SLLC_SRCID_CMD_MSK GENMASK(11, 1) +#define SLLC_SRCID_MSK_MSK GENMASK(22, 12)#define SLLC_NR_EVENTS 0x80 +#define SLLC_EVENT_CNTn (cnt0, n) ((cnt0) + (n) * 8) +#define SLLC_FIRST_BIT (_mask) (find_first_bit((const unsigned long *)&(_mask), 32)) +#define SLLC_FIELD_PREP (_mask, _val) (_mask & (_val << SLLC_FIRST_BIT(_mask)))HISI_PMU_EVENT_ATTR_EXTRACTOR (tgtid_min, config1,10 ,0 );HISI_PMU_EVENT_ATTR_EXTRACTOR (tgtid_max, config1,21 ,11 );
@@ -48,6 +51,23 @@ HISI_PMU_EVENT_ATTR_EXTRACTOR(srcid_cmd, config1, 32, 22);HISI_PMU_EVENT_ATTR_EXTRACTOR (srcid_msk, config1,43 ,33 );HISI_PMU_EVENT_ATTR_EXTRACTOR (tracetag_en, config1,44 ,44 ); +struct hisi_sllc_pmu_regs { +u32 int_mask; +u32 int_clear; +u32 int_status; +u32 perf_ctrl; +u32 srcid_ctrl; +u32 srcid_mask_msk; +u32 srcid_cmd_msk; +u32 tgtid_ctrl; +u32 tgtid_max_msk; +u32 tgtid_min_msk; +u32 event_ctrl; +u32 event_type0; +u32 version; +u32 event_cnt0; +}; +static bool tgtid_is_valid (u32 max,u32 min) {return max >0 && max >= min;
@@ -56,96 +76,103 @@ static bool tgtid_is_valid(u32 max, u32 min)static void hisi_sllc_pmu_enable_tracetag (struct perf_event *event) {struct hisi_pmu *sllc_pmu =to_hisi_pmu (event->pmu); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 tt_en =hisi_get_tracetag_en (event);if (tt_en) {u32 val; - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val |=SLLC_TRACETAG_EN |SLLC_FILT_EN ; -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); } }static void hisi_sllc_pmu_disable_tracetag (struct perf_event *event) {struct hisi_pmu *sllc_pmu =to_hisi_pmu (event->pmu); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 tt_en =hisi_get_tracetag_en (event);if (tt_en) {u32 val; - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val &= ~(SLLC_TRACETAG_EN |SLLC_FILT_EN ); -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); } }static void hisi_sllc_pmu_config_tgtid (struct perf_event *event) {struct hisi_pmu *sllc_pmu =to_hisi_pmu (event->pmu); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 min =hisi_get_tgtid_min (event);u32 max =hisi_get_tgtid_max (event);if (tgtid_is_valid (max, min)) { -u32 val = (max <<SLLC_TGTID_MAX_SHIFT ) | (min <<SLLC_TGTID_MIN_SHIFT ); +u32 val =SLLC_FIELD_PREP (regs->tgtid_max_msk, max) | +SLLC_FIELD_PREP (regs->tgtid_min_msk, min); -writel (val, sllc_pmu->base +SLLC_TGTID_CTRL ); +writel (val, sllc_pmu->base + regs->tgtid_ctrl);/* Enable the tgtid */ - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val |=SLLC_TGTID_EN |SLLC_FILT_EN ; -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); } }static void hisi_sllc_pmu_clear_tgtid (struct perf_event *event) {struct hisi_pmu *sllc_pmu =to_hisi_pmu (event->pmu); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 min =hisi_get_tgtid_min (event);u32 max =hisi_get_tgtid_max (event);if (tgtid_is_valid (max, min)) {u32 val; -writel (SLLC_TGTID_NONE , sllc_pmu->base +SLLC_TGTID_CTRL ); +writel (SLLC_TGTID_NONE , sllc_pmu->base + regs->tgtid_ctrl);/* Disable the tgtid */ - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val &= ~(SLLC_TGTID_EN |SLLC_FILT_EN ); -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); } }static void hisi_sllc_pmu_config_srcid (struct perf_event *event) {struct hisi_pmu *sllc_pmu =to_hisi_pmu (event->pmu); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 cmd =hisi_get_srcid_cmd (event);if (cmd) { -u32 val, msk; +u32 msk =hisi_get_srcid_msk (event); +u32 val =SLLC_FIELD_PREP (regs->srcid_mask_msk, msk) | +SLLC_FIELD_PREP (regs->srcid_cmd_msk, cmd); - msk =hisi_get_srcid_msk (event); - val = (cmd <<SLLC_SRCID_CMD_SHIFT ) | (msk <<SLLC_SRCID_MSK_SHIFT ); -writel (val, sllc_pmu->base +SLLC_SRCID_CTRL ); +writel (val, sllc_pmu->base + regs->srcid_ctrl);/* Enable the srcid */ - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val |=SLLC_SRCID_EN |SLLC_FILT_EN ; -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); } }static void hisi_sllc_pmu_clear_srcid (struct perf_event *event) {struct hisi_pmu *sllc_pmu =to_hisi_pmu (event->pmu); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 cmd =hisi_get_srcid_cmd (event);if (cmd) {u32 val; -writel (SLLC_SRCID_NONE , sllc_pmu->base +SLLC_SRCID_CTRL ); +writel (SLLC_SRCID_NONE , sllc_pmu->base + regs->srcid_ctrl);/* Disable the srcid */ - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val &= ~(SLLC_SRCID_EN |SLLC_FILT_EN ); -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); } }
@@ -167,29 +194,27 @@ static void hisi_sllc_pmu_clear_filter(struct perf_event *event) } } -static u32 hisi_sllc_pmu_get_counter_offset (int idx) -{ -return (SLLC_EVENT_CNT0_L + idx *8 ); -} -static u64 hisi_sllc_pmu_read_counter (struct hisi_pmu *sllc_pmu,struct hw_perf_event *hwc) { -return readq (sllc_pmu->base + -hisi_sllc_pmu_get_counter_offset (hwc->idx)); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private; + +return readq (sllc_pmu->base +SLLC_EVENT_CNTn (regs->event_cnt0, hwc->idx)); }static void hisi_sllc_pmu_write_counter (struct hisi_pmu *sllc_pmu,struct hw_perf_event *hwc,u64 val) { -writeq (val, sllc_pmu->base + -hisi_sllc_pmu_get_counter_offset (hwc->idx)); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private; + +writeq (val, sllc_pmu->base +SLLC_EVENT_CNTn (regs->event_cnt0, hwc->idx)); }static void hisi_sllc_pmu_write_evtype (struct hisi_pmu *sllc_pmu,int idx,u32 type) { -u32 reg, reg_idx, shift, val; +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private; +u32 reg, val;/* * Select the appropriate event select register(SLLC_EVENT_TYPE0/1).
@@ -198,96 +223,98 @@ static void hisi_sllc_pmu_write_evtype(struct hisi_pmu *sllc_pmu, int idx,* SLLC_EVENT_TYPE0 is chosen. For the latter 4 hardware counters, * SLLC_EVENT_TYPE1 is chosen. */ - reg =SLLC_EVENT_TYPE0 + (idx /4 ) *4 ; - reg_idx = idx %4 ; - shift =8 * reg_idx; + reg = regs->event_type0 + (idx /4 ) *4 ;/* Write event code to SLLC_EVENT_TYPEx Register */ val =readl (sllc_pmu->base + reg); - val &= ~(SLLC_EVTYPE_MASK << shift); - val |= (type << shift); + val &= ~(SLLC_EVTYPE_MASK <<HISI_PMU_EVTYPE_SHIFT (idx)); + val |= (type <<HISI_PMU_EVTYPE_SHIFT (idx));writel (val, sllc_pmu->base + reg); }static void hisi_sllc_pmu_start_counters (struct hisi_pmu *sllc_pmu) { +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 val; - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val |=SLLC_PERF_CTRL_EN ; -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); }static void hisi_sllc_pmu_stop_counters (struct hisi_pmu *sllc_pmu) { +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 val; - val =readl (sllc_pmu->base +SLLC_PERF_CTRL ); + val =readl (sllc_pmu->base + regs->perf_ctrl); val &= ~(SLLC_PERF_CTRL_EN ); -writel (val, sllc_pmu->base +SLLC_PERF_CTRL ); +writel (val, sllc_pmu->base + regs->perf_ctrl); }static void hisi_sllc_pmu_enable_counter (struct hisi_pmu *sllc_pmu,struct hw_perf_event *hwc) { +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 val; - val =readl (sllc_pmu->base +SLLC_EVENT_CTRL ); - val |=1 << hwc->idx; -writel (val, sllc_pmu->base +SLLC_EVENT_CTRL ); + val =readl (sllc_pmu->base + regs->event_ctrl); + val |=BIT_ULL (hwc->idx); +writel (val, sllc_pmu->base + regs->event_ctrl); }static void hisi_sllc_pmu_disable_counter (struct hisi_pmu *sllc_pmu,struct hw_perf_event *hwc) { +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 val; - val =readl (sllc_pmu->base +SLLC_EVENT_CTRL ); - val &= ~(1 << hwc->idx); -writel (val, sllc_pmu->base +SLLC_EVENT_CTRL ); + val =readl (sllc_pmu->base + regs->event_ctrl); + val &= ~BIT_ULL (hwc->idx); +writel (val, sllc_pmu->base + regs->event_ctrl); }static void hisi_sllc_pmu_enable_counter_int (struct hisi_pmu *sllc_pmu,struct hw_perf_event *hwc) { +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 val; - val =readl (sllc_pmu->base +SLLC_INT_MASK ); -/* Write 0 to enable interrupt */ - val &= ~(1 << hwc->idx); -writel (val, sllc_pmu->base +SLLC_INT_MASK ); + val =readl (sllc_pmu->base + regs->int_mask); + val &= ~BIT_ULL (hwc->idx); +writel (val, sllc_pmu->base + regs->int_mask); }static void hisi_sllc_pmu_disable_counter_int (struct hisi_pmu *sllc_pmu,struct hw_perf_event *hwc) { +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private;u32 val; - val =readl (sllc_pmu->base +SLLC_INT_MASK ); -/* Write 1 to mask interrupt */ - val |=1 << hwc->idx; -writel (val, sllc_pmu->base +SLLC_INT_MASK ); + val =readl (sllc_pmu->base + regs->int_mask); + val |=BIT_ULL (hwc->idx); +writel (val, sllc_pmu->base + regs->int_mask); }static u32 hisi_sllc_pmu_get_int_status (struct hisi_pmu *sllc_pmu) { -return readl (sllc_pmu->base +SLLC_INT_STATUS ); +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private; + +return readl (sllc_pmu->base + regs->int_status); }static void hisi_sllc_pmu_clear_int_status (struct hisi_pmu *sllc_pmu,int idx) { -writel (1 << idx, sllc_pmu->base +SLLC_INT_CLEAR ); -} +struct hisi_sllc_pmu_regs *regs = sllc_pmu->dev_info->private; -static const struct acpi_device_id hisi_sllc_pmu_acpi_match[] = { - {"HISI0263" , }, - {} -}; -MODULE_DEVICE_TABLE (acpi, hisi_sllc_pmu_acpi_match); +writel (BIT_ULL (idx), sllc_pmu->base + regs->int_clear); +}static int hisi_sllc_pmu_init_data (struct platform_device *pdev,struct hisi_pmu *sllc_pmu) { +struct hisi_sllc_pmu_regs *regs; +hisi_uncore_pmu_init_topology (sllc_pmu, &pdev->dev);/*
@@ -304,13 +331,18 @@ static int hisi_sllc_pmu_init_data(struct platform_device *pdev,return -EINVAL ; } + sllc_pmu->dev_info =device_get_match_data (&pdev->dev); +if (!sllc_pmu->dev_info) +return -ENODEV ; + sllc_pmu->base =devm_platform_ioremap_resource (pdev,0 );if (IS_ERR (sllc_pmu->base)) {dev_err (&pdev->dev,"ioremap failed for sllc_pmu resource.\n" );return PTR_ERR (sllc_pmu->base); } - sllc_pmu->identifier =readl (sllc_pmu->base +SLLC_VERSION ); + regs = sllc_pmu->dev_info->private; + sllc_pmu->identifier =readl (sllc_pmu->base + regs->version);return 0 ; }
@@ -352,6 +384,27 @@ static const struct attribute_group *hisi_sllc_pmu_v2_attr_groups[] = {NULL }; +static struct hisi_sllc_pmu_regs hisi_sllc_v2_pmu_regs = { + .int_mask =SLLC_INT_MASK , + .int_clear =SLLC_INT_CLEAR , + .int_status =SLLC_INT_STATUS , + .perf_ctrl =SLLC_PERF_CTRL , + .srcid_ctrl =SLLC_SRCID_CTRL , + .srcid_mask_msk =SLLC_SRCID_MSK_MSK , + .srcid_cmd_msk =SLLC_SRCID_CMD_MSK , + .tgtid_ctrl =SLLC_TGTID_CTRL , + .tgtid_max_msk =SLLC_TGTID_MAX_MSK , + .tgtid_min_msk =SLLC_TGTID_MIN_MSK , + .event_ctrl =SLLC_EVENT_CTRL , + .event_type0 =SLLC_EVENT_TYPE0 , + .version =SLLC_VERSION , + .event_cnt0 =SLLC_EVENT_CNT0_L , +}; + +static const struct hisi_pmu_dev_info hisi_sllc_v2 = { + .private = &hisi_sllc_v2_pmu_regs, +}; +static const struct hisi_uncore_ops hisi_uncore_sllc_ops = { .write_evtype = hisi_sllc_pmu_write_evtype, .get_event_idx = hisi_uncore_pmu_get_event_idx,
@@ -443,6 +496,12 @@ static void hisi_sllc_pmu_remove(struct platform_device *pdev) &sllc_pmu->node); } +static const struct acpi_device_id hisi_sllc_pmu_acpi_match[] = { + {"HISI0263" , (kernel_ulong_t)&hisi_sllc_v2 }, + {} +}; +MODULE_DEVICE_TABLE (acpi, hisi_sllc_pmu_acpi_match); +static struct platform_driver hisi_sllc_pmu_driver = { .driver = { .name ="hisi_sllc_pmu" ,
Signature · 1 line
2.24.0
Will Deacon
maintainerRe: [PATCH 4/9] drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
Quoted 25 lines · Yicong Yang
From: Junhao He <[email protected]>
Make use of struct
acpi_device_id::driver_datafor version specific information rather than judge the version register. This will help to simplify the probe process and also a bit easier for extension.Factor out SLLC register definition to struct
hisi_sllc_pmu_regs. No functional changes intended.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 191 ++++++++++++------ 1 file changed, 125 insertions(+), 66 deletions(-)drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +0
-2@@ -36,11 +36,14 @@#define SLLC_SRCID_NONE 0x0#define SLLC_TGTID_EN BIT(5)#define SLLC_TGTID_NONE 0x0 -#define SLLC_TGTID_MIN_SHIFT 1 -#define SLLC_TGTID_MAX_SHIFT 12
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c line 46
Quoted 10 lines
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +7
-2-#define SLLC_SRCID_CMD_SHIFT 1 -#define SLLC_SRCID_MSK_SHIFT 12 +#define SLLC_TGTID_MIN_MSK GENMASK(11, 1) +#define SLLC_TGTID_MAX_MSK GENMASK(22, 12) +#define SLLC_SRCID_CMD_MSK GENMASK(11, 1) +#define SLLC_SRCID_MSK_MSK GENMASK(22, 12)#define SLLC_NR_EVENTS 0x80 +#define SLLC_EVENT_CNTn (cnt0, n) ((cnt0) + (n) * 8) +#define SLLC_FIRST_BIT (_mask) (find_first_bit((const unsigned long *)&(_mask), 32)) +#define SLLC_FIELD_PREP (_mask, _val) (_mask & (_val << SLLC_FIRST_BIT(_mask)))
It's a bit of a shame to have to compute this dynamically given that the input mask is constant for a given device. Is it not possible to use the generic FIELD_PREP macro in per-device code and then just dispatch to that, instead of funneling everything through hisi_sllc_pmu_regs?
Will
Re: [PATCH 4/9] drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
Quoted 33 lines · On Sat, 1 Mar 2025 06:43:49 +0000 Will Deacon <[email protected]> wrote:
Quoted 32 lines · Yicong Yang
From: Junhao He <[email protected]>
Make use of struct
acpi_device_id::driver_datafor version specific information rather than judge the version register. This will help to simplify the probe process and also a bit easier for extension.Factor out SLLC register definition to struct
hisi_sllc_pmu_regs. No functional changes intended.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 191 ++++++++++++------ 1 file changed, 125 insertions(+), 66 deletions(-)drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +4
-4@@ -36,11 +36,14 @@#define SLLC_SRCID_NONE 0x0#define SLLC_TGTID_EN BIT(5)#define SLLC_TGTID_NONE 0x0 -#define SLLC_TGTID_MIN_SHIFT 1 -#define SLLC_TGTID_MAX_SHIFT 12 -#define SLLC_SRCID_CMD_SHIFT 1 -#define SLLC_SRCID_MSK_SHIFT 12 +#define SLLC_TGTID_MIN_MSK GENMASK(11, 1) +#define SLLC_TGTID_MAX_MSK GENMASK(22, 12) +#define SLLC_SRCID_CMD_MSK GENMASK(11, 1) +#define SLLC_SRCID_MSK_MSK GENMASK(22, 12)#define SLLC_NR_EVENTS 0x80
Quoted 8 lines
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c line 46
Quoted 3 lines
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +3
-0+#define SLLC_EVENT_CNTn (cnt0, n) ((cnt0) + (n) * 8) +#define SLLC_FIRST_BIT (_mask) (find_first_bit((const unsigned long *)&(_mask), 32)) +#define SLLC_FIELD_PREP (_mask, _val) (_mask & (_val << SLLC_FIRST_BIT(_mask)))It's a bit of a shame to have to compute this dynamically given that th input mask is constant for a given device. Is it not possible to use the generic
FIELD_PREPmacro in per-device code and then just dispatch to that, instead of funneling everything throughhisi_sllc_pmu_regs?
There is yet another ongoing discussion of handling non const field cases:
https://lore.kernel.org/all/[email protected]/
Maybe that will resolve with a nicer solution but I doubt it.
Alternatively best plan may be a shift (and length) instead of the neat solution of FIELD_PREP().
Jonathan
Quoted 2 lines
Will
Re: [PATCH 4/9] drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
In reply to Yicong YangQuoted 24 lines · On Tue, 18 Feb 2025 17:19:55 +0800 Yicong Yang <[email protected]> wrote:
From: Junhao He <[email protected]>
Make use of struct
acpi_device_id::driver_datafor version specific information rather than judge the version register. This will help to simplify the probe process and also a bit easier for extension.Factor out SLLC register definition to struct
hisi_sllc_pmu_regs. No functional changes intended.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 191 ++++++++++++------ 1 file changed, 125 insertions(+), 66 deletions(-)drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +0
-1@@ -36,11 +36,14 @@#define SLLC_SRCID_NONE 0x0#define SLLC_TGTID_EN BIT(5)#define SLLC_TGTID_NONE 0x0 -#define SLLC_TGTID_MIN_SHIFT 1
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c line 45
Quoted 10 lines
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +6
-3-#define SLLC_TGTID_MAX_SHIFT 12 -#define SLLC_SRCID_CMD_SHIFT 1 -#define SLLC_SRCID_MSK_SHIFT 12 +#define SLLC_TGTID_MIN_MSK GENMASK(11, 1) +#define SLLC_TGTID_MAX_MSK GENMASK(22, 12) +#define SLLC_SRCID_CMD_MSK GENMASK(11, 1) +#define SLLC_SRCID_MSK_MSK GENMASK(22, 12)#define SLLC_NR_EVENTS 0x80 +#define SLLC_EVENT_CNTn (cnt0, n) ((cnt0) + (n) * 8) +#define SLLC_FIRST_BIT (_mask) (find_first_bit((const unsigned long *)&(_mask), 32))
If you do end up keeping this, I think there should be no need for outer brackets here.
Quoted 1 line
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +1
-0+#define SLLC_FIELD_PREP (_mask, _val) (_mask & (_val << SLLC_FIRST_BIT(_mask)))
PATCH 5/9 drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
In reply to Yicong YangFrom: Junhao He <[email protected]>
SLLC v3 PMU has the following changes compared to previous version:
a) update the register layout
b) update the definition of SRCID_CTRL and TGTID_CTRL registers. To be compatible with v2, we use maximum width (11 bits) and mask the extra length for themselves.
c) remove latency events (driver does not need to be adapted).
SLLC v3 PMU is identified with HID HISI0264.
--- drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +40 -0
@@ -28,6 +28,18 @@#define SLLC_VERSION 0x1cf0#define SLLC_EVENT_CNT0_L 0x1d00 +/* SLLC registers definition in v3 */ +#define SLLC_V3_INT_MASK 0x6834 +#define SLLC_V3_INT_STATUS 0x6838 +#define SLLC_V3_INT_CLEAR 0x683c +#define SLLC_V3_VERSION 0x6c00 +#define SLLC_V3_PERF_CTRL 0x6d00 +#define SLLC_V3_SRCID_CTRL 0x6d04 +#define SLLC_V3_TGTID_CTRL 0x6d08 +#define SLLC_V3_EVENT_CTRL 0x6d14 +#define SLLC_V3_EVENT_TYPE0 0x6d18 +#define SLLC_V3_EVENT_CNT0_L 0x6e00 +#define SLLC_EVTYPE_MASK 0xff#define SLLC_PERF_CTRL_EN BIT(0)#define SLLC_FILT_EN BIT(1)
@@ -40,6 +52,12 @@#define SLLC_TGTID_MAX_MSK GENMASK(22, 12)#define SLLC_SRCID_CMD_MSK GENMASK(11, 1)#define SLLC_SRCID_MSK_MSK GENMASK(22, 12) + +#define SLLC_V3_TGTID_MIN_MSK GENMASK(9, 1) +#define SLLC_V3_TGTID_MAX_MSK GENMASK(18, 10) +#define SLLC_V3_SRCID_CMD_MSK GENMASK(9, 1) +#define SLLC_V3_SRCID_MSK_MSK GENMASK(18, 10) +#define SLLC_NR_EVENTS 0x80#define SLLC_EVENT_CNTn (cnt0, n) ((cnt0) + (n) * 8)#define SLLC_FIRST_BIT (_mask) (find_first_bit((const unsigned long *)&(_mask), 32))
@@ -405,6 +423,27 @@ static const struct hisi_pmu_dev_info hisi_sllc_v2 = { .private = &hisi_sllc_v2_pmu_regs, }; +static struct hisi_sllc_pmu_regs hisi_sllc_v3_pmu_regs = { + .int_mask =SLLC_V3_INT_MASK , + .int_clear =SLLC_V3_INT_CLEAR , + .int_status =SLLC_V3_INT_STATUS , + .perf_ctrl =SLLC_V3_PERF_CTRL , + .srcid_ctrl =SLLC_V3_SRCID_CTRL , + .srcid_mask_msk =SLLC_V3_SRCID_MSK_MSK , + .srcid_cmd_msk =SLLC_V3_SRCID_CMD_MSK , + .tgtid_ctrl =SLLC_V3_TGTID_CTRL , + .tgtid_max_msk =SLLC_V3_TGTID_MAX_MSK , + .tgtid_min_msk =SLLC_V3_TGTID_MIN_MSK , + .event_ctrl =SLLC_V3_EVENT_CTRL , + .event_type0 =SLLC_V3_EVENT_TYPE0 , + .version =SLLC_V3_VERSION , + .event_cnt0 =SLLC_V3_EVENT_CNT0_L , +}; + +static const struct hisi_pmu_dev_info hisi_sllc_v3 = { + .private = &hisi_sllc_v3_pmu_regs, +}; +static const struct hisi_uncore_ops hisi_uncore_sllc_ops = { .write_evtype = hisi_sllc_pmu_write_evtype, .get_event_idx = hisi_uncore_pmu_get_event_idx,
@@ -498,6 +537,7 @@ static void hisi_sllc_pmu_remove(struct platform_device *pdev)static const struct acpi_device_id hisi_sllc_pmu_acpi_match[] = { {"HISI0263" , (kernel_ulong_t)&hisi_sllc_v2 }, + {"HISI0264" , (kernel_ulong_t)&hisi_sllc_v3 }, {} };MODULE_DEVICE_TABLE (acpi, hisi_sllc_pmu_acpi_match);
Signature · 1 line
2.24.0
Re: [PATCH 5/9] drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
Quoted 9 lines · On Tue, 18 Feb 2025 17:19:56 +0800 Yicong Yang <[email protected]> wrote:
From: Junhao He <[email protected]>
SLLC v3 PMU has the following changes compared to previous version:
a) update the register layout
b) update the definition ofSRCID_CTRLandTGTID_CTRLregisters. To be compatible with v2, we use maximum width (11 bits) and mask the extra length for themselves.
c) remove latency events (driver does not need to be adapted).
Quoted 4 lines
SLLC v3 PMU is identified with HID HISI0264.
Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>
PATCH 6/9 drivers/perf: hisi: Relax the event number check of v2 PMUs
In reply to Yicong YangFrom: Junhao He <[email protected]>
The supported event number range of each Uncore PMUs is provided by each driver in hisi_pmu::check_event and out of range events will be rejected. A later version with expanded event number range needs to register the PMU with updated hisi_pmu::check_event even if it's the only update, which means the expanded events cannot be used unless the driver's updated. However the unsupported events won't be counted by the hardware so we can relax the event number check to allow the use the expanded events.
--- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 2 +- drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 7 +++---- drivers/perf/hisilicon/hisi_uncore_pa_pmu.c | 2 +- drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 3 +-- 4 files changed, 6 insertions(+), 8 deletions(-)
drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +1 -1
@@ -53,7 +53,7 @@#define DDRC_V1_PERF_CTRL_EN 0x2#define DDRC_V2_PERF_CTRL_EN 0x1#define DDRC_V1_NR_EVENTS 0x7 -#define DDRC_V2_NR_EVENTS 0x90 +#define DDRC_V2_NR_EVENTS 0xFF#define DDRC_EVENT_CNTn (base, n) ((base) + (n) * 8)#define DDRC_EVENT_TYPEn (base, n) ((base) + (n) * 4)
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +3 -4
@@ -47,9 +47,8 @@#define HHA_SRCID_CMD GENMASK(16, 6)#define HHA_SRCID_MSK GENMASK(30, 20)#define HHA_DATSRC_SKT_EN BIT(23) -#define HHA_EVTYPE_NONE 0xff +#define HHA_EVTYPE_MASK GENMASK(7, 0)#define HHA_V1_NR_EVENT 0x65 -#define HHA_V2_NR_EVENT 0xCEHISI_PMU_EVENT_ATTR_EXTRACTOR (srcid_cmd, config1,10 ,0 );HISI_PMU_EVENT_ATTR_EXTRACTOR (srcid_msk, config1,21 ,11 );
@@ -197,7 +196,7 @@ static void hisi_hha_pmu_write_evtype(struct hisi_pmu *hha_pmu, int idx,/* Write event code to HHA_EVENT_TYPEx register */ val =readl (hha_pmu->base + reg); - val &= ~(HHA_EVTYPE_NONE << shift); + val &= ~(HHA_EVTYPE_MASK << shift); val |= (type << shift);writel (val, hha_pmu->base + reg); }
@@ -453,7 +452,7 @@ static int hisi_hha_pmu_dev_probe(struct platform_device *pdev,if (hha_pmu->identifier >=HISI_PMU_V2 ) { hha_pmu->counter_bits =64 ; - hha_pmu->check_event =HHA_V2_NR_EVENT ; + hha_pmu->check_event =HHA_EVTYPE_MASK ; hha_pmu->pmu_events.attr_groups = hisi_hha_pmu_v2_attr_groups; hha_pmu->num_counters =HHA_V2_NR_COUNTERS ; }else {
drivers/perf/hisilicon/hisi_uncore_pa_pmu.c +1 -1
@@ -440,7 +440,7 @@ static int hisi_pa_pmu_dev_probe(struct platform_device *pdev, pa_pmu->pmu_events.attr_groups = pa_pmu->dev_info->attr_groups; pa_pmu->num_counters =PA_NR_COUNTERS ; pa_pmu->ops = &hisi_uncore_pa_ops; - pa_pmu->check_event =0xB0 ; + pa_pmu->check_event =PA_EVTYPE_MASK ; pa_pmu->counter_bits =64 ; pa_pmu->dev = &pdev->dev; pa_pmu->on_cpu =-1 ;
drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +1 -2
@@ -58,7 +58,6 @@#define SLLC_V3_SRCID_CMD_MSK GENMASK(9, 1)#define SLLC_V3_SRCID_MSK_MSK GENMASK(18, 10) -#define SLLC_NR_EVENTS 0x80#define SLLC_EVENT_CNTn (cnt0, n) ((cnt0) + (n) * 8)#define SLLC_FIRST_BIT (_mask) (find_first_bit((const unsigned long *)&(_mask), 32))#define SLLC_FIELD_PREP (_mask, _val) (_mask & (_val << SLLC_FIRST_BIT(_mask)))
@@ -476,7 +475,7 @@ static int hisi_sllc_pmu_dev_probe(struct platform_device *pdev, sllc_pmu->pmu_events.attr_groups = hisi_sllc_pmu_v2_attr_groups; sllc_pmu->ops = &hisi_uncore_sllc_ops; - sllc_pmu->check_event =SLLC_NR_EVENTS ; + sllc_pmu->check_event =SLLC_EVTYPE_MASK ; sllc_pmu->counter_bits =64 ; sllc_pmu->num_counters =8 ; sllc_pmu->dev = &pdev->dev;
Signature · 1 line
2.24.0
Re: [PATCH 6/9] drivers/perf: hisi: Relax the event number check of v2 PMUs
Quoted 38 lines · On Tue, 18 Feb 2025 17:19:57 +0800 Yicong Yang <[email protected]> wrote:
From: Junhao He <[email protected]>
The supported event number range of each Uncore PMUs is provided by each driver in
hisi_pmu::check_eventand out of range events will be rejected. A later version with expanded event number range needs to register the PMU with updatedhisi_pmu::check_eventeven if it's the only update, which means the expanded events cannot be used unless the driver's updated. However the unsupported events won't be counted by the hardware so we can relax the event number check to allow the use the expanded events.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 2 +- drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 7 +++---- drivers/perf/hisilicon/hisi_uncore_pa_pmu.c | 2 +- drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 3 +-- 4 files changed, 6 insertions(+), 8 deletions(-)drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +1
-1@@ -53,7 +53,7 @@#define DDRC_V1_PERF_CTRL_EN 0x2#define DDRC_V2_PERF_CTRL_EN 0x1#define DDRC_V1_NR_EVENTS 0x7 -#define DDRC_V2_NR_EVENTS 0x90 +#define DDRC_V2_NR_EVENTS 0xFF#define DDRC_EVENT_CNTn (base, n) ((base) + (n) * 8)#define DDRC_EVENT_TYPEn (base, n) ((base) + (n) * 4)drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +0
-0
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c line 50
Quoted 5 lines
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +1
-1@@ -47,9 +47,8 @@#define HHA_SRCID_CMD GENMASK(16, 6)#define HHA_SRCID_MSK GENMASK(30, 20)#define HHA_DATSRC_SKT_EN BIT(23) -#define HHA_EVTYPE_NONE 0xff +#define HHA_EVTYPE_MASK GENMASK(7, 0)
Using something called mask in places where we previously had something called nr_events seems a little odd.
renaming EVTYPE_NONE to EVTYPE_MASK seems valid given the useage but I'd have a different define for the number of events and not make both changes in one patch.
Quoted 15 lines
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +1
-2#define HHA_V1_NR_EVENT 0x65 -#define HHA_V2_NR_EVENT 0xCEHISI_PMU_EVENT_ATTR_EXTRACTOR (srcid_cmd, config1,10 ,0 );HISI_PMU_EVENT_ATTR_EXTRACTOR (srcid_msk, config1,21 ,11 );@@ -197,7 +196,7 @@ static void hisi_hha_pmu_write_evtype(struct hisi_pmu *hha_pmu, int idx,/* Write event code to HHA_EVENT_TYPEx register */ val =readl (hha_pmu->base + reg); - val &= ~(HHA_EVTYPE_NONE << shift); + val &= ~(HHA_EVTYPE_MASK << shift); val |= (type << shift);writel (val, hha_pmu->base + reg); }
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c static int hisi_hha_pmu_dev_probe(struct platform_device *pdev, · line 455
Quoted 5 lines
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +1
-1@@ -453,7 +452,7 @@ static int hisi_hha_pmu_dev_probe(struct platform_device *pdev,if (hha_pmu->identifier >=HISI_PMU_V2 ) { hha_pmu->counter_bits =64 ; - hha_pmu->check_event =HHA_V2_NR_EVENT ; + hha_pmu->check_event =HHA_EVTYPE_MASK ;
To me this makes little sense. Should be HHA_MAX_NR_EVENT or something like that.
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c static int hisi_hha_pmu_dev_probe(struct platform_device *pdev, · line 458
Quoted 3 lines
drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +0
-0hha_pmu->pmu_events.attr_groups = hisi_hha_pmu_v2_attr_groups; hha_pmu->num_counters =HHA_V2_NR_COUNTERS ; }else {
Jonathan
PATCH 7/9 drivers/perf: hisi: Support PMUs with no interrupt
In reply to Yicong YangFrom: Yicong Yang <[email protected]>
We'll have PMUs don't have an interrupt to indicate the counter overflow, but the Uncore PMU core assume all the PMUs have interrupt. So handle this case in the core. The existing PMUs won't be affected.
--- drivers/perf/hisilicon/hisi_uncore_pmu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/perf/hisilicon/hisi_uncore_pmu.c +8 -3
@@ -510,7 +510,9 @@ int hisi_uncore_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)return 0 ; hisi_pmu->on_cpu =cpumask_local_spread (0 ,dev_to_node (hisi_pmu->dev)); -WARN_ON (irq_set_affinity (hisi_pmu->irq,cpumask_of (hisi_pmu->on_cpu))); +if (hisi_pmu->irq >0 ) +WARN_ON (irq_set_affinity (hisi_pmu->irq, +cpumask_of (hisi_pmu->on_cpu)));return 0 ; }
@@ -525,7 +527,8 @@ int hisi_uncore_pmu_online_cpu(unsigned int cpu, struct hlist_node *node) hisi_pmu->on_cpu = cpu;/* Overflow interrupt also should use the same CPU */ -WARN_ON (irq_set_affinity (hisi_pmu->irq,cpumask_of (cpu))); +if (hisi_pmu->irq >0 ) +WARN_ON (irq_set_affinity (hisi_pmu->irq,cpumask_of (cpu)));return 0 ; }
@@ -560,7 +563,9 @@ int hisi_uncore_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)perf_pmu_migrate_context (&hisi_pmu->pmu, cpu, target);/* Use this CPU for event counting */ hisi_pmu->on_cpu = target; -WARN_ON (irq_set_affinity (hisi_pmu->irq,cpumask_of (target))); + +if (hisi_pmu->irq >0 ) +WARN_ON (irq_set_affinity (hisi_pmu->irq,cpumask_of (target)));return 0 ; }
Signature · 1 line
2.24.0
Re: [PATCH 7/9] drivers/perf: hisi: Support PMUs with no interrupt
Quoted 8 lines · On Tue, 18 Feb 2025 17:19:58 +0800 Yicong Yang <[email protected]> wrote:
From: Yicong Yang <[email protected]>
We'll have PMUs don't have an interrupt to indicate the counter overflow, but the Uncore PMU core assume all the PMUs have interrupt. So handle this case in the core. The existing PMUs won't be affected.
Signed-off-by Yicong Yang <[email protected]>
PATCH 8/9 drivers/perf: hisi: Add support for HiSilicon NoC PMU
In reply to Yicong YangFrom: Yicong Yang <[email protected]>
Adds the support for HiSilicon NoC (Network on Chip) PMU which will be used to monitor the events on the system bus. The PMU device will be named after the SCL ID (either Super CPU cluster or Super IO cluster) and the index ID, just similar to other HiSilicon Uncore PMUs. Below PMU formats are provided besides the event:
- ch: the transaction channel (data, request, response, etc) which can be used to filter the counting.
- tt_en: tracetag filtering enable. Just as other HiSilicon Uncore PMUs the NoC PMU supports only counting the transactions with tracetag.
The NoC PMU doesn't have an interrupt to indicate the overflow. However we have a 64 bit counter which is large enough and it's nearly impossible to overflow.
--- Documentation/admin-guide/perf/hisi-pmu.rst | 11 + drivers/perf/hisilicon/Makefile | 3 +- drivers/perf/hisilicon/hisi_uncore_noc_pmu.c | 391 +++++++++++++++++++ 3 files changed, 404 insertions(+), 1 deletion(-) create mode 100644 drivers/perf/hisilicon/hisi_uncore_noc_pmu.c
Documentation/admin-guide/perf/hisi-pmu.rst +11 -0
@@ -112,6 +112,17 @@ uring channel. It is 2 bits. Some important codes are as follows: - 2'b00: default value, count the events which sent to the both uring and uring_ext channel; +6. ch: NoC PMU supports to filter the event counts of certain transaction +channel with this option. The current supported channels are as follows: + +- 3'b010: Request channel +- 3'b100: Snoop channel +- 3'b110: Response channel +- 3'b111: Data channel + +7. tt_en: NoC PMU supports to only count the transactions with tracetag by +this option. See the 2nd list for more information about tracetag. + Users could configure IDs to count data come from specific CCL/ICL, by setting srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting tgtid_cmd & tgtid_msk. A set bit in srcid_msk/tgtid_msk means the PMU will not
drivers/perf/hisilicon/Makefile +2 -1
@@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_HISI_PMU) += hisi_uncore_pmu.o hisi_uncore_l3c_pmu.o \ hisi_uncore_hha_pmu.o hisi_uncore_ddrc_pmu.o hisi_uncore_sllc_pmu.o \ - hisi_uncore_pa_pmu.o hisi_uncore_cpa_pmu.o hisi_uncore_uc_pmu.o + hisi_uncore_pa_pmu.o hisi_uncore_cpa_pmu.o hisi_uncore_uc_pmu.o \ + hisi_uncore_noc_pmu.o obj-$(CONFIG_HISI_PCIE_PMU) += hisi_pcie_pmu.o obj-$(CONFIG_HNS3_PMU) += hns3_pmu.o
drivers/perf/hisilicon/hisi_uncore_noc_pmu.c new file +391 -0
391 lines not on this page · raw message
Signature · 1 line
2.24.0
Re: [PATCH 8/9] drivers/perf: hisi: Add support for HiSilicon NoC PMU
Quoted 15 lines · On Tue, 18 Feb 2025 17:19:59 +0800 Yicong Yang <[email protected]> wrote:
From: Yicong Yang <[email protected]>
Adds the support for HiSilicon NoC (Network on Chip) PMU which will be used to monitor the events on the system bus. The PMU device will be named after the SCL ID (either Super CPU cluster or Super IO cluster) and the index ID, just similar to other HiSilicon Uncore PMUs. Below PMU formats are provided besides the event:
- ch: the transaction channel (data, request, response, etc) which can be used to filter the counting.
-tt_en: tracetag filtering enable. Just as other HiSilicon Uncore PMUs the NoC PMU supports only counting the transactions with tracetag.
Quoted 5 lines
The NoC PMU doesn't have an interrupt to indicate the overflow. However we have a 64 bit counter which is large enough and it's nearly impossible to overflow.
Signed-off-by Yicong Yang <[email protected]>
A few minor comments inline.
Quoted 12 lines
--- Documentation/admin-guide/perf/hisi-pmu.rst | 11 + drivers/perf/hisilicon/Makefile | 3 +- drivers/perf/hisilicon/hisi_uncore_noc_pmu.c | 391 +++++++++++++++++++ 3 files changed, 404 insertions(+), 1 deletion(-) create mode 100644 drivers/perf/hisilicon/hisi_uncore_noc_pmu.cDocumentation/admin-guide/perf/hisi-pmu.rst +0
-0
Documentation/admin-guide/perf/hisi-pmu.rst uring channel. It is 2 bits. Some important codes are as follows: · line 115
Quoted 4 lines
Documentation/admin-guide/perf/hisi-pmu.rst +1
-0@@ -112,6 +112,17 @@ uring channel. It is 2 bits. Some important codes are as follows: - 2'b00: default value, count the events which sent to the both uring and uring_ext channel; +6. ch: NoC PMU supports to filter the event counts of certain transaction
supports filtering the event counts...
Documentation/admin-guide/perf/hisi-pmu.rst uring channel. It is 2 bits. Some important codes are as follows: · line 123
Quoted 8 lines
Documentation/admin-guide/perf/hisi-pmu.rst +8
-0+channel with this option. The current supported channels are as follows: + +- 3'b010: Request channel +- 3'b100: Snoop channel +- 3'b110: Response channel +- 3'b111: Data channel + +7. tt_en: NoC PMU supports to only count the transactions with tracetag by
supports counting only transactions that have tracetag set if this option is set.
Documentation/admin-guide/perf/hisi-pmu.rst uring channel. It is 2 bits. Some important codes are as follows:
Quoted 11 lines
Documentation/admin-guide/perf/hisi-pmu.rst +9
-0+this option. See the 2nd list for more information about tracetag. + +static int hisi_noc_pmu_probe(struct platform_device *pdev) +{ + struct hisi_pmu *noc_pmu; + char *name; + int ret; + + noc_pmu = devm_kzalloc(&pdev->dev, sizeof(*noc_pmu), GFP_KERNEL);
Quite a bit of use of &pdev->dev, maybe worth struct device *dev = &pdev->dev; to shorten all these lines.
Documentation/admin-guide/perf/hisi-pmu.rst
Quoted 6 lines
Documentation/admin-guide/perf/hisi-pmu.rst +6
-0+ if (!noc_pmu) + return -ENOMEM; + + /* + * HiSilicon Uncore PMU framework needs to get common hisi_pmu device + * by device's drvdata.
from device's drvdata
PATCH 9/9 drivers/perf: hisi: Add support for HiSilicon MN PMU driver
In reply to Yicong YangFrom: Junhao He <[email protected]>
MN (Miscellaneous Node) is a hybrid node in ARM CHI. It broadcasts the following two types of requests: DVM operations and PCIe configuration. MN PMU devices exist on both SCCL and SICL, so we named the MN pmu driver after SCL (Super cluster) ID.
The MN PMU driver using the HiSilicon uncore PMU framework. And only the event parameter is supported.
--- drivers/perf/hisilicon/Makefile | 2 +- drivers/perf/hisilicon/hisi_uncore_mn_pmu.c | 355 ++++++++++++++++++++ 2 files changed, 356 insertions(+), 1 deletion(-) create mode 100644 drivers/perf/hisilicon/hisi_uncore_mn_pmu.c
drivers/perf/hisilicon/Makefile +1 -1
@@ -2,7 +2,7 @@ obj-$(CONFIG_HISI_PMU) += hisi_uncore_pmu.o hisi_uncore_l3c_pmu.o \ hisi_uncore_hha_pmu.o hisi_uncore_ddrc_pmu.o hisi_uncore_sllc_pmu.o \ hisi_uncore_pa_pmu.o hisi_uncore_cpa_pmu.o hisi_uncore_uc_pmu.o \ - hisi_uncore_noc_pmu.o + hisi_uncore_noc_pmu.o hisi_uncore_mn_pmu.o obj-$(CONFIG_HISI_PCIE_PMU) += hisi_pcie_pmu.o obj-$(CONFIG_HNS3_PMU) += hns3_pmu.o
drivers/perf/hisilicon/hisi_uncore_mn_pmu.c new file +355 -0
355 lines not on this page · raw message
Signature · 1 line
2.24.0
Re: [PATCH 9/9] drivers/perf: hisi: Add support for HiSilicon MN PMU driver
Quoted 11 lines · On Tue, 18 Feb 2025 17:20:00 +0800 Yicong Yang <[email protected]> wrote:
From: Junhao He <[email protected]>
MN (Miscellaneous Node) is a hybrid node in ARM CHI. It broadcasts the following two types of requests: DVM operations and PCIe configuration. MN PMU devices exist on both SCCL and SICL, so we named the MN pmu driver after SCL (Super cluster) ID.
The MN PMU driver using the HiSilicon uncore PMU framework. And only the event parameter is supported.Signed-off-by Junhao He <[email protected]>Signed-off-by Yicong Yang <[email protected]>
Short and sweet