Skip to contentSkip to conversation

Add Synopsys DesignWare HDMI RX Controller

PATCH Superseded Dmitry Osipenko 3 participants 13 messages Feb 18, 2025 – Feb 22, 2025

Subsystems (4)

v7 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Dmitry Osipenko

author maintainer
#0 lore raw

v7 cover Add Synopsys DesignWare HDMI RX Controller

This series implements support for the Synopsys DesignWare HDMI RX Controller, being compliant with standard HDMI 1.4b and HDMI 2.0.

Features that are currently supported by the HDMI RX driver have been tested on rock5b board using a HDMI to micro-HDMI cable. It is recommended to use a good quality cable as there were multiple issues seen during testing the driver.

Please note the below information :-
* HDMIRX driver now only works with the opensource TF-A.
* We have tested the working of OBS studio with HDMIRX driver and there were no issues seen.
* We tested and verified the support for interlaced video.
* We tested capturing of YUV formats.

To test the HDMI RX Controller driver, following example commands can be used :-

root@debian-rockchip-rock5b-rk3588:~#  v4l2-ctl --stream-mmap \
--stream-count=100 --stream-to=/home/hdmiin4k.raw
root@debian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \
-s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv

CEC compliance test results :-

* https://gitlab.collabora.com/-/snippets/380
* https://gitlab.collabora.com/-/snippets/381

Following is the v4l2-compliance test result :-

root@debian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video1
v4l2-compliance 1.29.0-5326, 64 bits, 64-bit time_t
v4l2-compliance SHA: 77f5df419204 2025-02-07 08:59:59

Compliance test for snps_hdmirx device /dev/video1:

Driver Info:

        Driver name      : snps_hdmirx
        Card type        : snps_hdmirx
        Bus info         : platform:fdee0000.hdmi_receiver
        Driver version   : 6.14.0
        Capabilities     : 0x84201000

Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format

Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK

Allow for multiple opens:
test second /dev/video1 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK

Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK

Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0

Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)

Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test CREATE_BUFS maximum buffers: OK test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported) test blocking wait: OK

Test input 0:

Streaming ioctls:
test read/write: OK (Not Supported)
test MMAP (no poll, REQBUFS): OK
test MMAP (select, REQBUFS): OK
test MMAP (epoll, REQBUFS): OK
test MMAP (no poll, CREATE_BUFS): OK test MMAP (select, CREATE_BUFS): OK
test MMAP (epoll, CREATE_BUFS): OK
test USERPTR (no poll): OK (Not Supported) test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device

Total for snps_hdmirx device /dev/video1: 57, Succeeded: 57, Failed: 0, Warnings: 0

---

InfoFrame debugfs example output:-

# edid-decode -c -I /sys/kernel/debug/v4l2/fdee0000.hdmi_receiver/infoframes/avi
edid-decode InfoFrame (hex):

82 02 0d b1 12 28 84 00 00 00 00 00 00 00 00 00
00

----------------

HDMI InfoFrame Checksum: 0xb1

AVI InfoFrame
Version: 2
Length: 13
Y: Color Component Sample Format: RGB
A: Active Format Information Present: Yes
B: Bar Data Present: Bar Data not present
S: Scan Information: Composed for an underscanned display
C: Colorimetry: No Data
M: Picture Aspect Ratio: 16:9
R: Active Portion Aspect Ratio: 8
ITC: IT Content: IT Content (CN is valid)
EC: Extended Colorimetry: xvYCC601
Q: RGB Quantization Range: Limited Range
SC: Non-Uniform Picture Scaling: No Known non-uniform scaling
YQ: YCC Quantization Range: Limited Range
CN: IT Content Type: Graphics
PR: Pixel Data Repetition Count: 0
Line Number of End of Top Bar: 0
Line Number of Start of Bottom Bar: 0
Pixel Number of End of Left Bar: 0
Pixel Number of Start of Right Bar: 0

----------------

edid-decode 1.29.0-5326
edid-decode SHA: 77f5df419204 2025-02-07 08:59:59

AVI InfoFrame conformity: PASS

---

Changes in v7 :-
- Changed InfoFrame debugfs to return truncated payload data
- Updated cover-letter example stream capture cmdline with a minimized and cleaned version of the cmdline
- Added AVI InfoFrame example output to the cover-letter

Changes in v6 :-
- Driver now keeps HPD low instead of zeroing EDID when EDID-clearing is invoked and when default EDID usage is disabled in the kernel config
- Added InfoFrame debugfs support
- Added another code comment clarifying validation of timing values
- Rebased on top of recent media-next tree

Changes in v5 :-
- Fix the interrupt IRQ number in the dt-bindings and device tree
- Add alignment property to ensure hdmi-receiver-cma starts at a 64KB-aligned address
- Change the MODULE_DESCRIPTION
- Add VIDEO_SYNOPSYS_HDMIRX as prefix to the default edid config
- Drop the enabling of default edid in the Kconfig
- Replace the default EDID with hdmi-4k-300mhz EDID produced by v4l2-ctl tool for better compatibility with various HDMI cables and adapters
- Rework the write_edid and set_edid functions
- During format change, retrieve the current pixel format, color depth, and AVI infoframe details instead of only detecting the format
- Improve the logging mechanism and delays in the hdmirx_wait_signal_lock function
- Fix the 4K@60 capturing for RGB format
- Document what hdmirx_check_timing_valid function does
- Rework the hdmirx_get_detected_timings function
- Fix the NV16/24 size image value
- Add the implementation from Benjamin Hoff to expose the ITC type to v4l2
- Remove all the firmware related code

Changes in v4 :-
- Remove DTS changes included in the device tree patch
- Remove the hdmi rx pin info as it's already present in the rk3588-base-pinctrl.dtsi
- Create a separate config option for selecting the EDID and enable it by default
- Improve the comment related to DV timings and move it to the side of hdmirx_get_detected_timings
- Add 100ms delay before pulling the HPD high
- Do not return the detected timings from VIDIOC_G_DV_TIMINGS
- Drop the bus info from hdmirx_querycap
- If *num_planes != 0 then return 0 in hdmirx_queue_setup
- Set queue->min_queued_buffers to 1
- Drop q->allow_cache_hints = 0; as it's always 0 by default
- Add a comment for q->dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
- Drop .read = vb2_fop_read as it's not supported by driver
- Remove redundant edid_init_data_600M
- Make HPD low when driver is loaded
- Add support for reading AVI Infoframe
- Remove msg_len checks from hdmirx_cec_transmit
- Add info about the CEC compliance test in the cover letter
- Add arbitration lost status
- Validate the physical address inside the EDID

Changes in v3 :-
- Use v4l2-common helpers in the HDMIRX driver
- Rename cma node and phandle names
- Elaborate the comment to explain 160MiB calculation
- Move &hdmi_receiver_cma to the rock5b dts file
- Add information about interlaced video testing in the cover-letter

Changes in v2 :-
- Fix checkpatch --strict warnings
- Move the dt-binding include file changes in a separate patch
- Add a description for the hardware in the dt-bindings file
- Rename resets, vo1 grf and HPD properties
- Add a proper description for grf and vo1-grf phandles in the bindings
- Rename the HDMI RX node name to hdmi-receiver
- Include gpio header file in binding example to fix the dt_binding_check failure
- Move hdmirx_cma node to the rk3588.dtsi file
- Add an entry to MAINTAINERS file for the HDMIRX driver

Sebastian Reichel (2):
arm64: defconfig: Enable Synopsys HDMI receiver
arm64: dts: rockchip: Enable HDMI receiver on rock-5b

Shreeya Patel (4):
MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver
dt-bindings: media: Document bindings for HDMI RX Controller
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
media: platform: synopsys: Add support for HDMI input driver

 .../bindings/media/snps,dw-hdmi-rx.yaml       |  132 +
 MAINTAINERS                                   |    8 +
 .../dts/rockchip/rk3588-base-pinctrl.dtsi     |   14 +
 .../arm64/boot/dts/rockchip/rk3588-extra.dtsi |   57 +
 .../boot/dts/rockchip/rk3588-rock-5b.dts      |   18 +
 arch/arm64/configs/defconfig                  |    1 +
 drivers/media/platform/Kconfig                |    1 +
 drivers/media/platform/Makefile               |    1 +
 drivers/media/platform/synopsys/Kconfig       |    3 +
 drivers/media/platform/synopsys/Makefile      |    2 +
 .../media/platform/synopsys/hdmirx/Kconfig    |   27 +
 .../media/platform/synopsys/hdmirx/Makefile   |    4 +
 .../platform/synopsys/hdmirx/snps_hdmirx.c    | 2718 +++++++++++++++++
 .../platform/synopsys/hdmirx/snps_hdmirx.h    |  394 +++
 .../synopsys/hdmirx/snps_hdmirx_cec.c         |  284 ++
 .../synopsys/hdmirx/snps_hdmirx_cec.h         |   44 +
 16 files changed, 3708 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
 create mode 100644 drivers/media/platform/synopsys/Kconfig
 create mode 100644 drivers/media/platform/synopsys/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
Signature · 1 line
2.48.1
author maintainer
#1 lore raw

PATCH v7 1/6 MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver

From: Shreeya Patel <[email protected]>

Add an entry for Synopsys DesignWare HDMI Receiver Controller Driver.

---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)
MAINTAINERS +8 -0
index 896a307fa065..d73ddb317b11 100644
@@ -22942,6 +22942,14 @@ F:	drivers/net/pcs/pcs-xpcs.c
 F:	drivers/net/pcs/pcs-xpcs.h
 F:	include/linux/pcs/pcs-xpcs.h
 
+SYNOPSYS DESIGNWARE HDMI RX CONTROLLER DRIVER
+M:	Shreeya Patel <[email protected]>
+L:	[email protected]
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
+F:	drivers/media/platform/synopsys/hdmirx/*
+
 SYNOPSYS DESIGNWARE I2C DRIVER
 M:	Jarkko Nikula <[email protected]>
 R:	Andy Shevchenko <[email protected]>
Signature · 1 line
2.48.1
author maintainer
#2 lore raw

PATCH v7 2/6 dt-bindings: media: Document bindings for HDMI RX Controller

In reply to Dmitry Osipenko

From: Shreeya Patel <[email protected]>

Document bindings for the Synopsys DesignWare HDMI RX Controller.

---
 .../bindings/media/snps,dw-hdmi-rx.yaml       | 132 ++++++++++++++++++
 1 file changed, 132 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml new file +132 -0
new file mode 100644
index 000000000000..510e94e9ca3a
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Device Tree bindings for Synopsys DesignWare HDMI RX Controller
+
+---
+$id: http://devicetree.org/schemas/media/snps,dw-hdmi-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare HDMI RX Controller
+
+maintainers:
+  - Shreeya Patel <[email protected]>
+
+description:
+  Synopsys DesignWare HDMI Input Controller preset on RK3588 SoCs
+  allowing devices to receive and decode high-resolution video streams
+  from external sources like media players, cameras, laptops, etc.
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3588-hdmirx-ctrler
+      - const: snps,dw-hdmi-rx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: cec
+      - const: hdmi
+      - const: dma
+
+  clocks:
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: audio
+      - const: cr_para
+      - const: pclk
+      - const: ref
+      - const: hclk_s_hdmirx
+      - const: hclk_vo1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: axi
+      - const: apb
+      - const: ref
+      - const: biu
+
+  memory-region:
+    maxItems: 1
+
+  hpd-gpios:
+    description: GPIO specifier for HPD.
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the general register file
+      containing HDMIRX PHY status bits.
+
+  rockchip,vo1-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the Video Output GRF register
+      to enable EDID transfer through SDAIN and SCLIN.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - pinctrl-0
+  - hpd-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+    hdmi_receiver: hdmi-receiver@fdee0000 {
+      compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx";
+      reg = <0xfdee0000 0x6000>;
+      interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>,
+                   <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>,
+                   <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+      interrupt-names = "cec", "hdmi", "dma";
+      clocks = <&cru ACLK_HDMIRX>,
+               <&cru CLK_HDMIRX_AUD>,
+               <&cru CLK_CR_PARA>,
+               <&cru PCLK_HDMIRX>,
+               <&cru CLK_HDMIRX_REF>,
+               <&cru PCLK_S_HDMIRX>,
+               <&cru HCLK_VO1>;
+      clock-names = "aclk",
+                    "audio",
+                    "cr_para",
+                    "pclk",
+                    "ref",
+                    "hclk_s_hdmirx",
+                    "hclk_vo1";
+      power-domains = <&power RK3588_PD_VO1>;
+      resets = <&cru SRST_A_HDMIRX>, <&cru SRST_P_HDMIRX>,
+               <&cru SRST_HDMIRX_REF>, <&cru SRST_A_HDMIRX_BIU>;
+      reset-names = "axi", "apb", "ref", "biu";
+      memory-region = <&hdmi_receiver_cma>;
+      pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_5v_detection>;
+      pinctrl-names = "default";
+      hpd-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+    };
Signature · 1 line
2.48.1
author maintainer
#3 lore raw

PATCH v7 3/6 arm64: dts: rockchip: Add device tree support for HDMI RX Controller

In reply to Dmitry Osipenko

From: Shreeya Patel <[email protected]>

Add device tree support for Synopsys DesignWare HDMI RX Controller.

---
 .../dts/rockchip/rk3588-base-pinctrl.dtsi     | 14 +++++
 .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 57 +++++++++++++++++++
 2 files changed, 71 insertions(+)
arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi +14 -0
index 7f874c77410c..2d4b9986a177 100644
@@ -594,6 +594,20 @@ hdmim0_tx1_hpd: hdmim0-tx1-hpd {
 				/* hdmim0_tx1_hpd */
 				<1 RK_PA6 5 &pcfg_pull_none>;
 		};
+
+		/omit-if-no-ref/
+		hdmim1_rx: hdmim1-rx {
+			rockchip,pins =
+				/* hdmim1_rx_cec */
+				<3 RK_PD1 5 &pcfg_pull_none>,
+				/* hdmim1_rx_scl */
+				<3 RK_PD2 5 &pcfg_pull_none_smt>,
+				/* hdmim1_rx_sda */
+				<3 RK_PD3 5 &pcfg_pull_none_smt>,
+				/* hdmim1_rx_hpdin */
+				<3 RK_PD4 5 &pcfg_pull_none>;
+		};
+
 		/omit-if-no-ref/
 		hdmim1_rx_cec: hdmim1-rx-cec {
 			rockchip,pins =
arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi +57 -0

69 lines not on this page · raw message

Signature · 1 line
2.48.1
author maintainer
#4 lore raw

PATCH v7 4/6 media: platform: synopsys: Add support for HDMI input driver

In reply to Dmitry Osipenko

From: Shreeya Patel <[email protected]>

Add initial support for the Synopsys DesignWare HDMI RX Controller Driver used by Rockchip RK3588. The driver supports:
- HDMI 1.4b and 2.0 modes (HDMI 4k@60Hz)
- RGB888, YUV422, YUV444 and YCC420 pixel formats
- CEC
- EDID configuration

The hardware also has Audio and HDCP capabilities, but these are not yet supported by the driver.

---
 drivers/media/platform/Kconfig                |    1 +
 drivers/media/platform/Makefile               |    1 +
 drivers/media/platform/synopsys/Kconfig       |    3 +
 drivers/media/platform/synopsys/Makefile      |    2 +
 .../media/platform/synopsys/hdmirx/Kconfig    |   27 +
 .../media/platform/synopsys/hdmirx/Makefile   |    4 +
 .../platform/synopsys/hdmirx/snps_hdmirx.c    | 2718 +++++++++++++++++
 .../platform/synopsys/hdmirx/snps_hdmirx.h    |  394 +++
 .../synopsys/hdmirx/snps_hdmirx_cec.c         |  284 ++
 .../synopsys/hdmirx/snps_hdmirx_cec.h         |   44 +
 10 files changed, 3478 insertions(+)
 create mode 100644 drivers/media/platform/synopsys/Kconfig
 create mode 100644 drivers/media/platform/synopsys/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
drivers/media/platform/Kconfig +1 -0
index 85d2627776b6..9287faafdce5 100644
@@ -85,6 +85,7 @@ source "drivers/media/platform/rockchip/Kconfig"
 source "drivers/media/platform/samsung/Kconfig"
 source "drivers/media/platform/st/Kconfig"
 source "drivers/media/platform/sunxi/Kconfig"
+source "drivers/media/platform/synopsys/Kconfig"
 source "drivers/media/platform/ti/Kconfig"
 source "drivers/media/platform/verisilicon/Kconfig"
 source "drivers/media/platform/via/Kconfig"
drivers/media/platform/Makefile +1 -0
index ace4e34483dd..6fd7db0541c7 100644
@@ -28,6 +28,7 @@ obj-y += rockchip/
 obj-y += samsung/
 obj-y += st/
 obj-y += sunxi/
+obj-y += synopsys/
 obj-y += ti/
 obj-y += verisilicon/
 obj-y += via/
drivers/media/platform/synopsys/Kconfig new file +3 -0
new file mode 100644
index 000000000000..4fd521f78425
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+source "drivers/media/platform/synopsys/hdmirx/Kconfig"
drivers/media/platform/synopsys/Makefile new file +2 -0
new file mode 100644
index 000000000000..3b12c574dd67
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += hdmirx/
drivers/media/platform/synopsys/hdmirx/Kconfig new file +27 -0
new file mode 100644
index 000000000000..3f96f6c97cf0
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config VIDEO_SYNOPSYS_HDMIRX
+	tristate "Synopsys DesignWare HDMI Receiver driver"
+	depends on VIDEO_DEV
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select VIDEOBUF2_DMA_CONTIG
+	select CEC_CORE
+	select CEC_NOTIFIER
+	select HDMI
+	help
+	  Support for Synopsys HDMI HDMI RX Controller.
+	  This driver supports HDMI 2.0 version.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called synopsys_hdmirx.
+
+config VIDEO_SYNOPSYS_HDMIRX_LOAD_DEFAULT_EDID
+	bool "Load default EDID"
+	depends on VIDEO_SYNOPSYS_HDMIRX
+	help
+	  Preload default EDID (Extended Display Identification Data).
+	  EDID contains information about the capabilities of the display,
+	  such as supported resolutions, refresh rates, and audio formats.
+
+	  Enabling this option is recommended for a non-production use-cases.
drivers/media/platform/synopsys/hdmirx/Makefile new file +4 -0
new file mode 100644
index 000000000000..2fa2d9e25300
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+synopsys-hdmirx-objs := snps_hdmirx.o snps_hdmirx_cec.o
+
+obj-$(CONFIG_VIDEO_SYNOPSYS_HDMIRX) += synopsys-hdmirx.o
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +2718 -0

2,718 lines not on this page · raw message

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h new file +394 -0

232 lines not on this page · raw message

drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c new file +284 -0

284 lines not on this page · raw message

drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h new file +44 -0

44 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.48.1

Part of the diff is not shown here. View the raw message.

#5 lore raw

Re: [PATCH v7 4/6] media: platform: synopsys: Add support for HDMI input driver

Hi Dmitry,

More review comments. Some are trivial, but the real problem is that the 5V/HPD handling is really confusing and, from what I can tell, incorrect in places.

I suspect that there are some misunderstandings on how this is supposed to work. I've tried to explain it in my comments, but feel free to contact me if anything is still unclear.

Quoted 167 lines · Dmitry Osipenko

From: Shreeya Patel <[email protected]>

Add initial support for the Synopsys DesignWare HDMI RX Controller Driver used by Rockchip RK3588. The driver supports:
- HDMI 1.4b and 2.0 modes (HDMI 4k@60Hz)
- RGB888, YUV422, YUV444 and YCC420 pixel formats
- CEC
- EDID configuration

The hardware also has Audio and HDCP capabilities, but these are not yet supported by the driver.

---
 drivers/media/platform/Kconfig                |    1 +
 drivers/media/platform/Makefile               |    1 +
 drivers/media/platform/synopsys/Kconfig       |    3 +
 drivers/media/platform/synopsys/Makefile      |    2 +
 .../media/platform/synopsys/hdmirx/Kconfig    |   27 +
 .../media/platform/synopsys/hdmirx/Makefile   |    4 +
 .../platform/synopsys/hdmirx/snps_hdmirx.c    | 2718 +++++++++++++++++
 .../platform/synopsys/hdmirx/snps_hdmirx.h    |  394 +++
 .../synopsys/hdmirx/snps_hdmirx_cec.c         |  284 ++
 .../synopsys/hdmirx/snps_hdmirx_cec.h         |   44 +
 10 files changed, 3478 insertions(+)
 create mode 100644 drivers/media/platform/synopsys/Kconfig
 create mode 100644 drivers/media/platform/synopsys/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
drivers/media/platform/Kconfig +1 -0
index 85d2627776b6..9287faafdce5 100644
@@ -85,6 +85,7 @@ source "drivers/media/platform/rockchip/Kconfig"
 source "drivers/media/platform/samsung/Kconfig"
 source "drivers/media/platform/st/Kconfig"
 source "drivers/media/platform/sunxi/Kconfig"
+source "drivers/media/platform/synopsys/Kconfig"
 source "drivers/media/platform/ti/Kconfig"
 source "drivers/media/platform/verisilicon/Kconfig"
 source "drivers/media/platform/via/Kconfig"
drivers/media/platform/Makefile +1 -0
index ace4e34483dd..6fd7db0541c7 100644
@@ -28,6 +28,7 @@ obj-y += rockchip/
 obj-y += samsung/
 obj-y += st/
 obj-y += sunxi/
+obj-y += synopsys/
 obj-y += ti/
 obj-y += verisilicon/
 obj-y += via/
drivers/media/platform/synopsys/Kconfig new file +3 -0
new file mode 100644
index 000000000000..4fd521f78425
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+source "drivers/media/platform/synopsys/hdmirx/Kconfig"
drivers/media/platform/synopsys/Makefile new file +2 -0
new file mode 100644
index 000000000000..3b12c574dd67
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += hdmirx/
drivers/media/platform/synopsys/hdmirx/Kconfig new file +27 -0
new file mode 100644
index 000000000000..3f96f6c97cf0
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config VIDEO_SYNOPSYS_HDMIRX
+	tristate "Synopsys DesignWare HDMI Receiver driver"
+	depends on VIDEO_DEV
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select VIDEOBUF2_DMA_CONTIG
+	select CEC_CORE
+	select CEC_NOTIFIER
+	select HDMI
+	help
+	  Support for Synopsys HDMI HDMI RX Controller.
+	  This driver supports HDMI 2.0 version.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called synopsys_hdmirx.
+
+config VIDEO_SYNOPSYS_HDMIRX_LOAD_DEFAULT_EDID
+	bool "Load default EDID"
+	depends on VIDEO_SYNOPSYS_HDMIRX
+	help
+	  Preload default EDID (Extended Display Identification Data).
+	  EDID contains information about the capabilities of the display,
+	  such as supported resolutions, refresh rates, and audio formats.
+
+	  Enabling this option is recommended for a non-production use-cases.
drivers/media/platform/synopsys/hdmirx/Makefile new file +4 -0
new file mode 100644
index 000000000000..2fa2d9e25300
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+synopsys-hdmirx-objs := snps_hdmirx.o snps_hdmirx_cec.o
+
+obj-$(CONFIG_VIDEO_SYNOPSYS_HDMIRX) += synopsys-hdmirx.o
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +39 -0
new file mode 100644
index 000000000000..03d4da9b0e81
@@ -0,0 +1,2718 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Collabora, Ltd.
+ * Author: Shreeya Patel <[email protected]>
+ *
+ * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
+ * Author: Dingxian Wen <[email protected]>
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
+#include <linux/hdmi.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/v4l2-dv-timings.h>
+#include <linux/workqueue.h>
+
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 49

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+#include <media/videobuf2-dma-contig.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/v4l2-common.h>
+
+#include <sound/hdmi-codec.h>
+
+#include "snps_hdmirx.h"
+#include "snps_hdmirx_cec.h"
+
+#define EDID_NUM_BLOCKS_MAX				2

Is this indeed the maximum number of supported EDID blocks? These days 4 EDID blocks is typically the maximum. If the hardware supports it, then I recommend implementing support for 4 EDID blocks.

If it really only supports 2 blocks, then add a comment stating that this is a HW limitation.

Quoted 165 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +165 -0
+#define EDID_BLOCK_SIZE					128
+#define HDMIRX_PLANE_Y					0
+#define HDMIRX_PLANE_CBCR				1
+#define FILTER_FRAME_CNT				6
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-3)");
+
+enum hdmirx_pix_fmt {
+	HDMIRX_RGB888 = 0,
+	HDMIRX_YUV422 = 1,
+	HDMIRX_YUV444 = 2,
+	HDMIRX_YUV420 = 3,
+};
+
+enum ddr_store_fmt {
+	STORE_RGB888 = 0,
+	STORE_RGBA_ARGB,
+	STORE_YUV420_8BIT,
+	STORE_YUV420_10BIT,
+	STORE_YUV422_8BIT,
+	STORE_YUV422_10BIT,
+	STORE_YUV444_8BIT,
+	STORE_YUV420_16BIT = 8,
+	STORE_YUV422_16BIT = 9,
+};
+
+enum hdmirx_reg_attr {
+	HDMIRX_ATTR_RW = 0,
+	HDMIRX_ATTR_RO = 1,
+	HDMIRX_ATTR_WO = 2,
+	HDMIRX_ATTR_RE = 3,
+};
+
+enum {
+	HDMIRX_RST_A,
+	HDMIRX_RST_P,
+	HDMIRX_RST_REF,
+	HDMIRX_RST_BIU,
+	HDMIRX_NUM_RST,
+};
+
+static const char * const pix_fmt_str[] = {
+	"RGB888",
+	"YUV422",
+	"YUV444",
+	"YUV420",
+};
+
+struct hdmirx_buffer {
+	struct vb2_v4l2_buffer vb;
+	struct list_head queue;
+	u32 buff_addr[VIDEO_MAX_PLANES];
+};
+
+struct hdmirx_stream {
+	struct snps_hdmirx_dev *hdmirx_dev;
+	struct video_device vdev;
+	struct vb2_queue buf_queue;
+	struct list_head buf_head;
+	struct hdmirx_buffer *curr_buf;
+	struct hdmirx_buffer *next_buf;
+	struct v4l2_pix_format_mplane pixm;
+	const struct v4l2_format_info *out_finfo;
+	struct mutex vlock; /* to lock resources associated with video buffer and video device */
+	spinlock_t vbq_lock; /* to lock video buffer queue */
+	bool stopping;
+	wait_queue_head_t wq_stopped;
+	u32 frame_idx;
+	u32 line_flag_int_cnt;
+	u32 irq_stat;
+};
+
+struct snps_hdmirx_dev {
+	struct device *dev;
+	struct device *codec_dev;
+	struct hdmirx_stream stream;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
+	struct v4l2_ctrl *detect_tx_5v_ctrl;
+	struct v4l2_ctrl *rgb_range;
+	struct v4l2_ctrl *content_type;
+	struct v4l2_dv_timings timings;
+	struct gpio_desc *detect_5v_gpio;
+	struct delayed_work delayed_work_hotplug;
+	struct delayed_work delayed_work_res_change;
+	struct cec_notifier *cec_notifier;
+	struct hdmirx_cec *cec;
+	struct mutex stream_lock; /* to lock video stream capture */
+	struct mutex work_lock; /* to lock the critical section of hotplug event */
+	struct reset_control_bulk_data resets[HDMIRX_NUM_RST];
+	struct clk_bulk_data *clks;
+	struct regmap *grf;
+	struct regmap *vo1_grf;
+	struct completion cr_write_done;
+	struct completion timer_base_lock;
+	struct completion avi_pkt_rcv;
+	struct dentry *debugfs_dir;
+	struct v4l2_debugfs_if *infoframes;
+	enum hdmirx_pix_fmt pix_fmt;
+	void __iomem *regs;
+	int hdmi_irq;
+	int dma_irq;
+	int det_irq;
+	bool hpd_trigger_level_high;
+	bool hpd_pull_low;
+	bool tmds_clk_ratio;
+	u32 num_clks;
+	u32 edid_blocks_written;
+	u32 cur_fmt_fourcc;
+	u32 color_depth;
+	u8 edid[EDID_BLOCK_SIZE * 2];
+	hdmi_codec_plugged_cb plugged_cb;
+	spinlock_t rst_lock; /* to lock register access */
+};
+
+static const struct v4l2_dv_timings cea640x480 = V4L2_DV_BT_CEA_640X480P59_94;
+
+static const struct v4l2_dv_timings_cap hdmirx_timings_cap = {
+	.type = V4L2_DV_BT_656_1120,
+	.reserved = { 0 },
+	V4L2_INIT_BT_TIMINGS(640, 4096,			/* min/max width */
+			     480, 2160,			/* min/max height */
+			     20000000, 600000000,	/* min/max pixelclock */
+			     /* standards */
+			     V4L2_DV_BT_STD_CEA861,
+			     /* capabilities */
+			     V4L2_DV_BT_CAP_PROGRESSIVE |
+			     V4L2_DV_BT_CAP_INTERLACED)
+};
+
+static void hdmirx_writel(struct snps_hdmirx_dev *hdmirx_dev, int reg, u32 val)
+{
+	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
+
+	writel(val, hdmirx_dev->regs + reg);
+}
+
+static u32 hdmirx_readl(struct snps_hdmirx_dev *hdmirx_dev, int reg)
+{
+	u32 val;
+
+	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
+
+	val = readl(hdmirx_dev->regs + reg);
+
+	return val;
+}
+
+static void hdmirx_reset_dma(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
+
+	reset_control_reset(hdmirx_dev->resets[0].rstc);
+}
+
+static void hdmirx_update_bits(struct snps_hdmirx_dev *hdmirx_dev, int reg,
+			       u32 mask, u32 data)
+{
+	u32 val;
+
+	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
+
+	val = readl(hdmirx_dev->regs + reg) & ~mask;

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 224

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+	val |= (data & mask);
+	writel(val, hdmirx_dev->regs + reg);
+}
+
+static int hdmirx_subscribe_event(struct v4l2_fh *fh,
+				  const struct v4l2_event_subscription *sub)
+{
+	switch (sub->type) {
+	case V4L2_EVENT_SOURCE_CHANGE:
+		if (fh->vdev->vfl_dir == VFL_DIR_RX)

This is weird, the direction is always RX, so can't you just drop this test?

Quoted 479 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +479 -0
+			return v4l2_src_change_event_subscribe(fh, sub);
+		break;
+	case V4L2_EVENT_CTRL:
+		return v4l2_ctrl_subscribe_event(fh, sub);
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static bool tx_5v_power_present(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	const unsigned int detection_threshold = 7;
+	int val, i, cnt = 0;
+	bool ret;
+
+	for (i = 0; i < 10; i++) {
+		usleep_range(1000, 1100);
+		val = gpiod_get_value(hdmirx_dev->detect_5v_gpio);
+		if (val > 0)
+			cnt++;
+		if (cnt >= detection_threshold)
+			break;
+	}
+
+	ret = (cnt >= detection_threshold) ? true : false;
+	v4l2_dbg(3, debug, &hdmirx_dev->v4l2_dev, "%s: %d\n", __func__, ret);
+
+	return ret;
+}
+
+static bool signal_not_lock(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	u32 mu_status, dma_st10, cmu_st;
+
+	mu_status = hdmirx_readl(hdmirx_dev, MAINUNIT_STATUS);
+	dma_st10 = hdmirx_readl(hdmirx_dev, DMA_STATUS10);
+	cmu_st = hdmirx_readl(hdmirx_dev, CMU_STATUS);
+
+	if ((mu_status & TMDSVALID_STABLE_ST) &&
+	    (dma_st10 & HDMIRX_LOCK) &&
+	    (cmu_st & TMDSQPCLK_LOCKED_ST))
+		return false;
+
+	return true;
+}
+
+static void hdmirx_get_timings(struct snps_hdmirx_dev *hdmirx_dev,
+			       struct v4l2_bt_timings *bt)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 hact, vact, htotal, vtotal, fps;
+	u32 hfp, hs, hbp, vfp, vs, vbp;
+	u32 val;
+
+	val = hdmirx_readl(hdmirx_dev, DMA_STATUS2);
+	hact = (val >> 16) & 0xffff;
+	vact = val & 0xffff;
+
+	val = hdmirx_readl(hdmirx_dev, DMA_STATUS3);
+	htotal = (val >> 16) & 0xffff;
+	vtotal = val & 0xffff;
+
+	val = hdmirx_readl(hdmirx_dev, DMA_STATUS4);
+	hs = (val >> 16) & 0xffff;
+	vs = val & 0xffff;
+
+	val = hdmirx_readl(hdmirx_dev, DMA_STATUS5);
+	hbp = (val >> 16) & 0xffff;
+	vbp = val & 0xffff;
+
+	if (hdmirx_dev->pix_fmt == HDMIRX_YUV420) {
+		htotal *= 2;
+		hbp *= 2;
+		hs *= 2;
+	}
+
+	hfp = htotal - hact - hs - hbp;
+	vfp = vtotal - vact - vs - vbp;
+
+	fps = (bt->pixelclock + (htotal * vtotal) / 2) / (htotal * vtotal);
+	bt->width = hact;
+	bt->height = vact;
+	bt->hfrontporch = hfp;
+	bt->hsync = hs;
+	bt->hbackporch = hbp;
+	bt->vfrontporch = vfp;
+	bt->vsync = vs;
+	bt->vbackporch = vbp;
+
+	v4l2_dbg(1, debug, v4l2_dev, "get timings from dma\n");
+	v4l2_dbg(1, debug, v4l2_dev,
+		 "act:%ux%u%s, total:%ux%u, fps:%u, pixclk:%llu\n",
+		 bt->width, bt->height, bt->interlaced ? "i" : "p",
+		 htotal, vtotal, fps, bt->pixelclock);
+
+	v4l2_dbg(2, debug, v4l2_dev,
+		 "hfp:%u, hact:%u, hs:%u, hbp:%u, vfp:%u, vact:%u, vs:%u, vbp:%u\n",
+		 bt->hfrontporch, hact, bt->hsync, bt->hbackporch,
+		 bt->vfrontporch, vact, bt->vsync, bt->vbackporch);
+
+	if (bt->interlaced == V4L2_DV_INTERLACED) {
+		bt->height *= 2;
+		bt->il_vfrontporch = bt->vfrontporch;
+		bt->il_vsync = bt->vsync + 1;
+		bt->il_vbackporch = bt->vbackporch;
+	}
+}
+
+static bool hdmirx_check_timing_valid(struct v4l2_bt_timings *bt)
+{
+	/*
+	 * Sanity-check timing values. Some of the values will be outside
+	 * of a valid range till hardware becomes ready to perform capture.
+	 */
+	if (bt->width < 100 || bt->width > 5000 ||
+	    bt->height < 100 || bt->height > 5000)
+		return false;
+
+	if (!bt->hsync || bt->hsync > 200 ||
+	    !bt->vsync || bt->vsync > 100)
+		return false;
+
+	if (!bt->hbackporch || bt->hbackporch > 2000 ||
+	    !bt->vbackporch || bt->vbackporch > 2000)
+		return false;
+
+	if (!bt->hfrontporch || bt->hfrontporch > 2000 ||
+	    !bt->vfrontporch || bt->vfrontporch > 2000)
+		return false;
+
+	return true;
+}
+
+static void hdmirx_toggle_polarity(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	u32 val = hdmirx_readl(hdmirx_dev, DMA_CONFIG6);
+
+	if (!(val & (VSYNC_TOGGLE_EN | HSYNC_TOGGLE_EN))) {
+		hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6,
+				   VSYNC_TOGGLE_EN | HSYNC_TOGGLE_EN,
+				   VSYNC_TOGGLE_EN | HSYNC_TOGGLE_EN);
+		hdmirx_update_bits(hdmirx_dev, VIDEO_CONFIG2,
+				   VPROC_VSYNC_POL_OVR_VALUE |
+				   VPROC_VSYNC_POL_OVR_EN |
+				   VPROC_HSYNC_POL_OVR_VALUE |
+				   VPROC_HSYNC_POL_OVR_EN,
+				   VPROC_VSYNC_POL_OVR_EN |
+				   VPROC_HSYNC_POL_OVR_EN);
+		return;
+	}
+
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6,
+			   VSYNC_TOGGLE_EN | HSYNC_TOGGLE_EN, 0);
+
+	hdmirx_update_bits(hdmirx_dev, VIDEO_CONFIG2,
+			   VPROC_VSYNC_POL_OVR_VALUE |
+			   VPROC_VSYNC_POL_OVR_EN |
+			   VPROC_HSYNC_POL_OVR_VALUE |
+			   VPROC_HSYNC_POL_OVR_EN, 0);
+}
+
+/*
+ * When querying DV timings during preview, if the DMA's timing is stable,
+ * we retrieve the timings directly from the DMA. However, if the current
+ * resolution is negative, obtaining the timing from CTRL may require a
+ * change in the sync polarity, potentially leading to DMA errors.
+ */
+static int hdmirx_get_detected_timings(struct snps_hdmirx_dev *hdmirx_dev,
+				       struct v4l2_dv_timings *timings)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	struct v4l2_bt_timings *bt = &timings->bt;
+	u32 val, tmdsqpclk_freq, pix_clk;
+	u32 field_type, deframer_st;
+	u64 tmp_data, tmds_clk;
+	bool is_dvi_mode;
+	int num_retries = 0;
+	int ret;
+
+	mutex_lock(&hdmirx_dev->work_lock);
+retry:
+	memset(timings, 0, sizeof(struct v4l2_dv_timings));
+	timings->type = V4L2_DV_BT_656_1120;
+
+	val = hdmirx_readl(hdmirx_dev, DMA_STATUS11);
+	field_type = (val & HDMIRX_TYPE_MASK) >> 7;
+
+	if (field_type & BIT(0))
+		bt->interlaced = V4L2_DV_INTERLACED;
+	else
+		bt->interlaced = V4L2_DV_PROGRESSIVE;
+
+	deframer_st = hdmirx_readl(hdmirx_dev, DEFRAMER_STATUS);
+	is_dvi_mode = !(deframer_st & OPMODE_STS_MASK);
+
+	tmdsqpclk_freq = hdmirx_readl(hdmirx_dev, CMU_TMDSQPCLK_FREQ);
+	tmds_clk = tmdsqpclk_freq * 4 * 1000;
+	tmp_data = tmds_clk * 24;
+	do_div(tmp_data, hdmirx_dev->color_depth);
+	pix_clk = tmp_data;
+	bt->pixelclock = pix_clk;
+
+	if (hdmirx_dev->pix_fmt == HDMIRX_YUV420)
+		bt->pixelclock *= 2;
+
+	hdmirx_get_timings(hdmirx_dev, bt);
+
+	v4l2_dbg(2, debug, v4l2_dev, "tmds_clk:%llu, pix_clk:%d\n", tmds_clk, pix_clk);
+	v4l2_dbg(1, debug, v4l2_dev, "interlace:%d, fmt:%d, color:%d, mode:%s\n",
+		 bt->interlaced, hdmirx_dev->pix_fmt,
+		 hdmirx_dev->color_depth,
+		 is_dvi_mode ? "dvi" : "hdmi");
+	v4l2_dbg(2, debug, v4l2_dev, "deframer_st:%#x\n", deframer_st);
+
+	/*
+	 * Timing will be invalid until it's latched by HW or if signal's
+	 * polarity doesn't match.
+	 */
+	if (!hdmirx_check_timing_valid(bt)) {
+		if (num_retries++ < 20) {
+			if (num_retries == 10)
+				hdmirx_toggle_polarity(hdmirx_dev);
+
+			usleep_range(10 * 1000, 10 * 1100);
+			goto retry;
+		}
+
+		ret = -ERANGE;
+	} else {
+		ret = 0;
+	}
+
+	mutex_unlock(&hdmirx_dev->work_lock);
+
+	return ret;
+}
+
+static bool port_no_link(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	return !tx_5v_power_present(hdmirx_dev);
+}
+
+static int hdmirx_query_dv_timings(struct file *file, void *_fh,
+				   struct v4l2_dv_timings *timings)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	int ret;
+
+	if (port_no_link(hdmirx_dev)) {
+		v4l2_err(v4l2_dev, "%s: port has no link\n", __func__);
+		return -ENOLINK;
+	}
+
+	if (signal_not_lock(hdmirx_dev)) {
+		v4l2_err(v4l2_dev, "%s: signal is not locked\n", __func__);
+		return -ENOLCK;
+	}
+
+	ret = hdmirx_get_detected_timings(hdmirx_dev, timings);
+	if (ret)
+		return ret;
+
+	if (debug)
+		v4l2_print_dv_timings(hdmirx_dev->v4l2_dev.name,
+				      "query_dv_timings: ", timings, false);
+
+	if (!v4l2_valid_dv_timings(timings, &hdmirx_timings_cap, NULL, NULL)) {
+		v4l2_dbg(1, debug, v4l2_dev, "%s: timings out of range\n", __func__);
+		return -ERANGE;
+	}
+
+	return 0;
+}
+
+static void hdmirx_hpd_ctrl(struct snps_hdmirx_dev *hdmirx_dev, bool en)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	v4l2_dbg(1, debug, v4l2_dev, "%s: %sable, hpd_trigger_level_high:%d hpd_pull_low:%d\n",
+		 __func__, en ? "en" : "dis",
+		 hdmirx_dev->hpd_trigger_level_high, hdmirx_dev->hpd_pull_low);
+
+	if (hdmirx_dev->hpd_pull_low && en)
+		return;
+
+	hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, HPDLOW, en ? 0 : HPDLOW);
+	en = hdmirx_dev->hpd_trigger_level_high ? en : !en;
+	hdmirx_writel(hdmirx_dev, CORE_CONFIG, en);
+}
+
+static void hdmirx_write_edid(struct snps_hdmirx_dev *hdmirx_dev,
+			      struct v4l2_edid *edid)
+{
+	u32 edid_len = edid->blocks * EDID_BLOCK_SIZE;
+	char data[300];
+	u32 i;
+
+	memset(edid->reserved, 0, sizeof(edid->reserved));
+
+	cec_s_phys_addr_from_edid(hdmirx_dev->cec->adap,
+				  (const struct edid *)edid->edid);
+
+	memset(&hdmirx_dev->edid, 0, sizeof(hdmirx_dev->edid));
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG11,
+			   EDID_READ_EN_MASK |
+			   EDID_WRITE_EN_MASK |
+			   EDID_SLAVE_ADDR_MASK,
+			   EDID_READ_EN(0) |
+			   EDID_WRITE_EN(1) |
+			   EDID_SLAVE_ADDR(0x50));
+	for (i = 0; i < edid_len; i++)
+		hdmirx_writel(hdmirx_dev, DMA_CONFIG10, edid->edid[i]);
+
+	/* read out for debug */
+	if (debug >= 2) {
+		hdmirx_update_bits(hdmirx_dev, DMA_CONFIG11,
+				   EDID_READ_EN_MASK |
+				   EDID_WRITE_EN_MASK,
+				   EDID_READ_EN(1) |
+				   EDID_WRITE_EN(0));
+		edid_len = edid_len > sizeof(data) ? sizeof(data) : edid_len;
+		memset(data, 0, sizeof(data));
+		for (i = 0; i < edid_len; i++)
+			data[i] = hdmirx_readl(hdmirx_dev, DMA_STATUS14);
+
+		print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, data,
+			       edid_len, false);
+	}
+
+	/*
+	 * You must set EDID_READ_EN & EDID_WRITE_EN bit to 0,
+	 * when the read/write edid operation is completed.Otherwise, it
+	 * will affect the reading and writing of other registers
+	 */
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG11,
+			   EDID_READ_EN_MASK | EDID_WRITE_EN_MASK,
+			   EDID_READ_EN(0) | EDID_WRITE_EN(0));
+
+	hdmirx_dev->edid_blocks_written = edid->blocks;
+	memcpy(&hdmirx_dev->edid, edid->edid, edid->blocks * EDID_BLOCK_SIZE);
+}
+
+/*
+ * Before clearing interrupt, we need to read the interrupt status.
+ */
+static inline void hdmirx_clear_interrupt(struct snps_hdmirx_dev *hdmirx_dev,
+					  u32 reg, u32 val)
+{
+	/* (interrupt status register) = (interrupt clear register) - 0x8 */
+	hdmirx_readl(hdmirx_dev, reg - 0x8);
+	hdmirx_writel(hdmirx_dev, reg, val);
+}
+
+static void hdmirx_interrupts_setup(struct snps_hdmirx_dev *hdmirx_dev, bool en)
+{
+	v4l2_dbg(1, debug, &hdmirx_dev->v4l2_dev, "%s: %sable\n",
+		 __func__, en ? "en" : "dis");
+
+	disable_irq(hdmirx_dev->hdmi_irq);
+
+	/* Note: In DVI mode, it needs to be written twice to take effect. */
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_0_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_2_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_0_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_2_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, AVPUNIT_0_INT_CLEAR, 0xffffffff);
+
+	if (en) {
+		hdmirx_update_bits(hdmirx_dev, MAINUNIT_0_INT_MASK_N,
+				   TMDSQPCLK_OFF_CHG | TMDSQPCLK_LOCKED_CHG,
+				   TMDSQPCLK_OFF_CHG | TMDSQPCLK_LOCKED_CHG);
+		hdmirx_update_bits(hdmirx_dev, MAINUNIT_2_INT_MASK_N,
+				   TMDSVALID_STABLE_CHG, TMDSVALID_STABLE_CHG);
+		hdmirx_update_bits(hdmirx_dev, AVPUNIT_0_INT_MASK_N,
+				   CED_DYN_CNT_CH2_IRQ |
+				   CED_DYN_CNT_CH1_IRQ |
+				   CED_DYN_CNT_CH0_IRQ,
+				   CED_DYN_CNT_CH2_IRQ |
+				   CED_DYN_CNT_CH1_IRQ |
+				   CED_DYN_CNT_CH0_IRQ);
+	} else {
+		hdmirx_writel(hdmirx_dev, MAINUNIT_0_INT_MASK_N, 0);
+		hdmirx_writel(hdmirx_dev, MAINUNIT_2_INT_MASK_N, 0);
+		hdmirx_writel(hdmirx_dev, AVPUNIT_0_INT_MASK_N, 0);
+	}
+
+	enable_irq(hdmirx_dev->hdmi_irq);
+}
+
+static void hdmirx_plugout(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, POWERPROVIDED, 0);
+	hdmirx_interrupts_setup(hdmirx_dev, false);
+	hdmirx_hpd_ctrl(hdmirx_dev, false);
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6, HDMIRX_DMA_EN, 0);
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG4,
+			   LINE_FLAG_INT_EN |
+			   HDMIRX_DMA_IDLE_INT |
+			   HDMIRX_LOCK_DISABLE_INT |
+			   LAST_FRAME_AXI_UNFINISH_INT_EN |
+			   FIFO_OVERFLOW_INT_EN |
+			   FIFO_UNDERFLOW_INT_EN |
+			   HDMIRX_AXI_ERROR_INT_EN, 0);
+	hdmirx_reset_dma(hdmirx_dev);
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, HDMI_DISABLE | PHY_RESET |
+			   PHY_PDDQ, HDMI_DISABLE);
+	hdmirx_writel(hdmirx_dev, PHYCREG_CONFIG0, 0x0);
+	cancel_delayed_work(&hdmirx_dev->delayed_work_res_change);
+
+	v4l2_ctrl_s_ctrl(hdmirx_dev->rgb_range, V4L2_DV_RGB_RANGE_AUTO);
+	v4l2_ctrl_s_ctrl(hdmirx_dev->content_type, V4L2_DV_IT_CONTENT_TYPE_NO_ITC);
+}
+
+static void hdmirx_disable_irq(struct device *dev)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = dev_get_drvdata(dev);
+
+	disable_irq(hdmirx_dev->det_irq);
+	disable_irq(hdmirx_dev->dma_irq);
+	disable_irq(hdmirx_dev->hdmi_irq);
+
+	cancel_delayed_work_sync(&hdmirx_dev->delayed_work_hotplug);
+	cancel_delayed_work_sync(&hdmirx_dev->delayed_work_res_change);
+}
+
+static void hdmirx_enable_irq(struct device *dev)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = dev_get_drvdata(dev);
+
+	enable_irq(hdmirx_dev->hdmi_irq);
+	enable_irq(hdmirx_dev->dma_irq);
+	enable_irq(hdmirx_dev->det_irq);
+
+	if (!hdmirx_dev->hpd_pull_low)
+		queue_delayed_work(system_unbound_wq,
+				   &hdmirx_dev->delayed_work_hotplug,
+				   msecs_to_jiffies(110));
+}
+
+static int hdmirx_set_edid(struct file *file, void *fh, struct v4l2_edid *edid)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	u16 phys_addr;
+	int ret = 0;
+
+	if (edid->pad)
+		return -EINVAL;
+
+	if (edid->start_block)
+		return -EINVAL;
+
+	if (edid->blocks > EDID_NUM_BLOCKS_MAX) {
+		edid->blocks = EDID_NUM_BLOCKS_MAX;
+		return -E2BIG;
+	}
+
+	hdmirx_disable_irq(hdmirx_dev->dev);
+
+	if (!edid->blocks) {
+		cec_phys_addr_invalidate(hdmirx_dev->cec->adap);
+		hdmirx_dev->edid_blocks_written = 0;
+
+		hdmirx_dev->hpd_pull_low = true;
+
+		if (tx_5v_power_present(hdmirx_dev))
+			hdmirx_plugout(hdmirx_dev);
+		else
+			hdmirx_hpd_ctrl(hdmirx_dev, false);
+	} else {
+		phys_addr = cec_get_edid_phys_addr(edid->edid,
+						   edid->blocks * 128, NULL);
+		ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
+		if (ret)
+			goto out;

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 713

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+
+		if (tx_5v_power_present(hdmirx_dev))
+			hdmirx_plugout(hdmirx_dev);
+
+		hdmirx_dev->hpd_pull_low = false;
+		hdmirx_hpd_ctrl(hdmirx_dev, false);
+		hdmirx_write_edid(hdmirx_dev, edid);
+	}
+out:
+	hdmirx_enable_irq(hdmirx_dev->dev);

The way the HPD is handled is really confusing in the code. I had to dig through the driver code to discover that the HPD is enabled via hdmirx_enable_irq(). But normally interrupts have nothing to do with the HPD.

The HPD is really only controlled by whether there is an EDID or not, and optionally whether 5V is high or not. The only reason for pulling the HPD low if 5V is low is to save a bit of power: if nothing is connected, then there is no need to pull the HPD high, after all, nobody is listening to it.

But this is typically entirely separate from interrupts.

The 5V decides whether there is a video source or not, so if it goes low, then you stop streaming. The HPD tells the video source if there is an EDID or not. But that is independent of video streaming. Updating the EDID while the source is sending video shouldn't interrupt video capture. Most likely the source will detect an EDID change, parse the new EDID and then it might decide to stop streaming and reconfigure, or just continue streaming.

The code feels like you are trying to be smart, when it is really just a fairly dumb mechanism.

I think this should be rewritten, unless there are some odd hardware constraints. In which case that should be documented.

Quoted 42 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +42 -0
+
+	return ret;
+}
+
+static int hdmirx_get_edid(struct file *file, void *fh, struct v4l2_edid *edid)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	memset(edid->reserved, 0, sizeof(edid->reserved));
+
+	if (edid->pad)
+		return -EINVAL;
+
+	if (!edid->start_block && !edid->blocks) {
+		edid->blocks = hdmirx_dev->edid_blocks_written;
+		return 0;
+	}
+
+	if (!hdmirx_dev->edid_blocks_written)
+		return -ENODATA;
+
+	if (edid->start_block >= hdmirx_dev->edid_blocks_written || !edid->blocks)
+		return -EINVAL;
+
+	if (edid->start_block + edid->blocks > hdmirx_dev->edid_blocks_written)
+		edid->blocks = hdmirx_dev->edid_blocks_written - edid->start_block;
+
+	memcpy(edid->edid, &hdmirx_dev->edid, edid->blocks * EDID_BLOCK_SIZE);
+
+	v4l2_dbg(1, debug, v4l2_dev, "%s: read EDID:\n", __func__);
+	if (debug > 0)
+		print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+			       edid->edid, edid->blocks * EDID_BLOCK_SIZE, false);
+
+	return 0;
+}
+
+static int hdmirx_g_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *parm)
+{

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 765

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_fract fps;
+
+	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return -EINVAL;
+
+	fps = v4l2_calc_timeperframe(&hdmirx_dev->timings);
+	parm->parm.capture.timeperframe.numerator = fps.numerator;
+	parm->parm.capture.timeperframe.denominator = fps.denominator;

You can just write:

	parm->parm.capture.timeperframe = v4l2_calc_timeperframe(&hdmirx_dev->timings);
Quoted 1,389 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +1389 -0
+
+	return 0;
+}
+
+static int hdmirx_dv_timings_cap(struct file *file, void *fh,
+				 struct v4l2_dv_timings_cap *cap)
+{
+	*cap = hdmirx_timings_cap;
+	return 0;
+}
+
+static int hdmirx_enum_dv_timings(struct file *file, void *_fh,
+				  struct v4l2_enum_dv_timings *timings)
+{
+	return v4l2_enum_dv_timings_cap(timings, &hdmirx_timings_cap, NULL, NULL);
+}
+
+static void hdmirx_scdc_init(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_update_bits(hdmirx_dev, I2C_SLAVE_CONFIG1,
+			   I2C_SDA_OUT_HOLD_VALUE_QST_MASK |
+			   I2C_SDA_IN_HOLD_VALUE_QST_MASK,
+			   I2C_SDA_OUT_HOLD_VALUE_QST(0x80) |
+			   I2C_SDA_IN_HOLD_VALUE_QST(0x15));
+	hdmirx_update_bits(hdmirx_dev, SCDC_REGBANK_CONFIG0,
+			   SCDC_SINKVERSION_QST_MASK,
+			   SCDC_SINKVERSION_QST(1));
+}
+
+static int wait_reg_bit_status(struct snps_hdmirx_dev *hdmirx_dev, u32 reg,
+			       u32 bit_mask, u32 expect_val, bool is_grf,
+			       u32 ms)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 i, val;
+
+	for (i = 0; i < ms; i++) {
+		if (is_grf)
+			regmap_read(hdmirx_dev->grf, reg, &val);
+		else
+			val = hdmirx_readl(hdmirx_dev, reg);
+
+		if ((val & bit_mask) == expect_val) {
+			v4l2_dbg(2, debug, v4l2_dev,
+				 "%s:  i:%d, time: %dms\n", __func__, i, ms);
+			break;
+		}
+		usleep_range(1000, 1010);
+	}
+
+	if (i == ms)
+		return -1;
+
+	return 0;
+}
+
+static int hdmirx_phy_register_write(struct snps_hdmirx_dev *hdmirx_dev,
+				     u32 phy_reg, u32 val)
+{
+	struct device *dev = hdmirx_dev->dev;
+
+	reinit_completion(&hdmirx_dev->cr_write_done);
+	/* clear irq status */
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_2_INT_CLEAR, 0xffffffff);
+	/* en irq */
+	hdmirx_update_bits(hdmirx_dev, MAINUNIT_2_INT_MASK_N,
+			   PHYCREG_CR_WRITE_DONE, PHYCREG_CR_WRITE_DONE);
+	/* write phy reg addr */
+	hdmirx_writel(hdmirx_dev, PHYCREG_CONFIG1, phy_reg);
+	/* write phy reg val */
+	hdmirx_writel(hdmirx_dev, PHYCREG_CONFIG2, val);
+	/* config write enable */
+	hdmirx_writel(hdmirx_dev, PHYCREG_CONTROL, PHYCREG_CR_PARA_WRITE_P);
+
+	if (!wait_for_completion_timeout(&hdmirx_dev->cr_write_done,
+					 msecs_to_jiffies(20))) {
+		dev_err(dev, "%s wait cr write done failed\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+static void hdmirx_tmds_clk_ratio_config(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 val;
+
+	val = hdmirx_readl(hdmirx_dev, SCDC_REGBANK_STATUS1);
+	v4l2_dbg(3, debug, v4l2_dev, "%s: scdc_regbank_st:%#x\n", __func__, val);
+	hdmirx_dev->tmds_clk_ratio = (val & SCDC_TMDSBITCLKRATIO) > 0;
+
+	if (hdmirx_dev->tmds_clk_ratio) {
+		v4l2_dbg(3, debug, v4l2_dev, "%s: HDMITX greater than 3.4Gbps\n", __func__);
+		hdmirx_update_bits(hdmirx_dev, PHY_CONFIG,
+				   TMDS_CLOCK_RATIO, TMDS_CLOCK_RATIO);
+	} else {
+		v4l2_dbg(3, debug, v4l2_dev, "%s: HDMITX less than 3.4Gbps\n", __func__);
+		hdmirx_update_bits(hdmirx_dev, PHY_CONFIG,
+				   TMDS_CLOCK_RATIO, 0);
+	}
+}
+
+static void hdmirx_phy_config(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct device *dev = hdmirx_dev->dev;
+
+	hdmirx_clear_interrupt(hdmirx_dev, SCDC_INT_CLEAR, 0xffffffff);
+	hdmirx_update_bits(hdmirx_dev, SCDC_INT_MASK_N, SCDCTMDSCCFG_CHG,
+			   SCDCTMDSCCFG_CHG);
+	/* cr_para_clk 24M */
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, REFFREQ_SEL_MASK, REFFREQ_SEL(0));
+	/* rx data width 40bit valid */
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, RXDATA_WIDTH, RXDATA_WIDTH);
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, PHY_RESET, PHY_RESET);
+	usleep_range(100, 110);
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, PHY_RESET, 0);
+	usleep_range(100, 110);
+	/* select cr para interface */
+	hdmirx_writel(hdmirx_dev, PHYCREG_CONFIG0, 0x3);
+
+	if (wait_reg_bit_status(hdmirx_dev, SYS_GRF_SOC_STATUS1,
+				HDMIRXPHY_SRAM_INIT_DONE,
+				HDMIRXPHY_SRAM_INIT_DONE, true, 10))
+		dev_err(dev, "%s: phy SRAM init failed\n", __func__);
+
+	regmap_write(hdmirx_dev->grf, SYS_GRF_SOC_CON1,
+		     (HDMIRXPHY_SRAM_EXT_LD_DONE << 16) |
+		     HDMIRXPHY_SRAM_EXT_LD_DONE);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 2);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 3);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 2);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 2);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 3);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 2);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 0);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 1);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 0);
+	hdmirx_phy_register_write(hdmirx_dev, SUP_DIG_ANA_CREGS_SUP_ANA_NC, 0);
+
+	hdmirx_phy_register_write(hdmirx_dev,
+				  HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_3_REG,
+				  CDR_SETTING_BOUNDARY_3_DEFAULT);
+	hdmirx_phy_register_write(hdmirx_dev,
+				  HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_4_REG,
+				  CDR_SETTING_BOUNDARY_4_DEFAULT);
+	hdmirx_phy_register_write(hdmirx_dev,
+				  HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_5_REG,
+				  CDR_SETTING_BOUNDARY_5_DEFAULT);
+	hdmirx_phy_register_write(hdmirx_dev,
+				  HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_6_REG,
+				  CDR_SETTING_BOUNDARY_6_DEFAULT);
+	hdmirx_phy_register_write(hdmirx_dev,
+				  HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_7_REG,
+				  CDR_SETTING_BOUNDARY_7_DEFAULT);
+
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, PHY_PDDQ, 0);
+	if (wait_reg_bit_status(hdmirx_dev, PHY_STATUS, PDDQ_ACK, 0, false, 10))
+		dev_err(dev, "%s: wait pddq ack failed\n", __func__);
+
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, HDMI_DISABLE, 0);
+	if (wait_reg_bit_status(hdmirx_dev, PHY_STATUS, HDMI_DISABLE_ACK, 0,
+				false, 50))
+		dev_err(dev, "%s: wait hdmi disable ack failed\n", __func__);
+
+	hdmirx_tmds_clk_ratio_config(hdmirx_dev);
+}
+
+static void hdmirx_controller_init(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	const unsigned long iref_clk_freq_hz = 428571429;
+	struct device *dev = hdmirx_dev->dev;
+
+	reinit_completion(&hdmirx_dev->timer_base_lock);
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_0_INT_CLEAR, 0xffffffff);
+	/* en irq */
+	hdmirx_update_bits(hdmirx_dev, MAINUNIT_0_INT_MASK_N,
+			   TIMER_BASE_LOCKED_IRQ, TIMER_BASE_LOCKED_IRQ);
+	/* write irefclk freq */
+	hdmirx_writel(hdmirx_dev, GLOBAL_TIMER_REF_BASE, iref_clk_freq_hz);
+
+	if (!wait_for_completion_timeout(&hdmirx_dev->timer_base_lock,
+					 msecs_to_jiffies(20)))
+		dev_err(dev, "%s wait timer base lock failed\n", __func__);
+
+	hdmirx_update_bits(hdmirx_dev, CMU_CONFIG0,
+			   TMDSQPCLK_STABLE_FREQ_MARGIN_MASK |
+			   AUDCLK_STABLE_FREQ_MARGIN_MASK,
+			   TMDSQPCLK_STABLE_FREQ_MARGIN(2) |
+			   AUDCLK_STABLE_FREQ_MARGIN(1));
+	hdmirx_update_bits(hdmirx_dev, DESCRAND_EN_CONTROL,
+			   SCRAMB_EN_SEL_QST_MASK, SCRAMB_EN_SEL_QST(1));
+	hdmirx_update_bits(hdmirx_dev, CED_CONFIG,
+			   CED_VIDDATACHECKEN_QST |
+			   CED_DATAISCHECKEN_QST |
+			   CED_GBCHECKEN_QST |
+			   CED_CTRLCHECKEN_QST |
+			   CED_CHLOCKMAXER_QST_MASK,
+			   CED_VIDDATACHECKEN_QST |
+			   CED_GBCHECKEN_QST |
+			   CED_CTRLCHECKEN_QST |
+			   CED_CHLOCKMAXER_QST(0x10));
+	hdmirx_update_bits(hdmirx_dev, DEFRAMER_CONFIG0,
+			   VS_REMAPFILTER_EN_QST | VS_FILTER_ORDER_QST_MASK,
+			   VS_REMAPFILTER_EN_QST | VS_FILTER_ORDER_QST(0x3));
+}
+
+static void hdmirx_get_colordepth(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 val, color_depth_reg;
+
+	val = hdmirx_readl(hdmirx_dev, DMA_STATUS11);
+	color_depth_reg = (val & HDMIRX_COLOR_DEPTH_MASK) >> 3;
+
+	switch (color_depth_reg) {
+	case 0x4:
+		hdmirx_dev->color_depth = 24;
+		break;
+	case 0x5:
+		hdmirx_dev->color_depth = 30;
+		break;
+	case 0x6:
+		hdmirx_dev->color_depth = 36;
+		break;
+	case 0x7:
+		hdmirx_dev->color_depth = 48;
+		break;
+	default:
+		hdmirx_dev->color_depth = 24;
+		break;
+	}
+
+	v4l2_dbg(1, debug, v4l2_dev, "%s: color_depth: %d, reg_val:%d\n",
+		 __func__, hdmirx_dev->color_depth, color_depth_reg);
+}
+
+static void hdmirx_get_pix_fmt(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 val;
+
+	val = hdmirx_readl(hdmirx_dev, DMA_STATUS11);
+	hdmirx_dev->pix_fmt = val & HDMIRX_FORMAT_MASK;
+
+	switch (hdmirx_dev->pix_fmt) {
+	case HDMIRX_RGB888:
+		hdmirx_dev->cur_fmt_fourcc = V4L2_PIX_FMT_BGR24;
+		break;
+	case HDMIRX_YUV422:
+		hdmirx_dev->cur_fmt_fourcc = V4L2_PIX_FMT_NV16;
+		break;
+	case HDMIRX_YUV444:
+		hdmirx_dev->cur_fmt_fourcc = V4L2_PIX_FMT_NV24;
+		break;
+	case HDMIRX_YUV420:
+		hdmirx_dev->cur_fmt_fourcc = V4L2_PIX_FMT_NV12;
+		break;
+	default:
+		v4l2_err(v4l2_dev,
+			 "%s: err pix_fmt: %d, set RGB888 as default\n",
+			 __func__, hdmirx_dev->pix_fmt);
+		hdmirx_dev->pix_fmt = HDMIRX_RGB888;
+		hdmirx_dev->cur_fmt_fourcc = V4L2_PIX_FMT_BGR24;
+		break;
+	}
+
+	v4l2_dbg(1, debug, v4l2_dev, "%s: pix_fmt: %s\n", __func__,
+		 pix_fmt_str[hdmirx_dev->pix_fmt]);
+}
+
+static void hdmirx_read_avi_infoframe(struct snps_hdmirx_dev *hdmirx_dev,
+				      u8 *aviif)
+{
+	unsigned int i, b, itr = 0;
+	u32 val;
+
+	aviif[itr++] = HDMI_INFOFRAME_TYPE_AVI;
+	val = hdmirx_readl(hdmirx_dev, PKTDEC_AVIIF_PH2_1);
+	aviif[itr++] = val & 0xff;
+	aviif[itr++] = (val >> 8) & 0xff;
+
+	for (i = 0; i < 7; i++) {
+		val = hdmirx_readl(hdmirx_dev, PKTDEC_AVIIF_PB3_0 + 4 * i);
+
+		for (b = 0; b < 4; b++)
+			aviif[itr++] = (val >> (8 * b)) & 0xff;
+	}
+}
+
+static void hdmirx_get_avi_infoframe(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	union hdmi_infoframe frame = {};
+	u8 aviif[3 + 7 * 4];
+	int err;
+
+	hdmirx_read_avi_infoframe(hdmirx_dev, aviif);
+
+	err = hdmi_infoframe_unpack(&frame, aviif, sizeof(aviif));
+	if (err) {
+		v4l2_err(v4l2_dev, "failed to unpack AVI infoframe\n");
+		return;
+	}
+
+	v4l2_ctrl_s_ctrl(hdmirx_dev->rgb_range, frame.avi.quantization_range);
+
+	if (frame.avi.itc)
+		v4l2_ctrl_s_ctrl(hdmirx_dev->content_type,
+				 frame.avi.content_type);
+	else
+		v4l2_ctrl_s_ctrl(hdmirx_dev->content_type,
+				 V4L2_DV_IT_CONTENT_TYPE_NO_ITC);
+}
+
+static ssize_t
+hdmirx_debugfs_if_read(u32 type, void *priv, struct file *filp,
+		       char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = priv;
+	u8 aviif[V4L2_DEBUGFS_IF_MAX_LEN] = {};
+	int len;
+
+	if (type != V4L2_DEBUGFS_IF_AVI)
+		return 0;
+
+	hdmirx_read_avi_infoframe(hdmirx_dev, aviif);
+
+	len = aviif[2] + 4;
+	if (len > V4L2_DEBUGFS_IF_MAX_LEN)
+		len = -ENOENT;
+	else
+		len = simple_read_from_buffer(ubuf, count, ppos, aviif, len);
+
+	return len < 0 ? 0 : len;
+}
+
+static void hdmirx_format_change(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct hdmirx_stream *stream = &hdmirx_dev->stream;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	static const struct v4l2_event ev_src_chg = {
+		.type = V4L2_EVENT_SOURCE_CHANGE,
+		.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+	};
+
+	hdmirx_get_pix_fmt(hdmirx_dev);
+	hdmirx_get_colordepth(hdmirx_dev);
+	hdmirx_get_avi_infoframe(hdmirx_dev);
+
+	v4l2_dbg(1, debug, v4l2_dev, "%s: queue res_chg_event\n", __func__);
+	v4l2_event_queue(&stream->vdev, &ev_src_chg);
+}
+
+static void hdmirx_set_ddr_store_fmt(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	enum ddr_store_fmt store_fmt;
+	u32 dma_cfg1;
+
+	switch (hdmirx_dev->pix_fmt) {
+	case HDMIRX_RGB888:
+		store_fmt = STORE_RGB888;
+		break;
+	case HDMIRX_YUV444:
+		store_fmt = STORE_YUV444_8BIT;
+		break;
+	case HDMIRX_YUV422:
+		store_fmt = STORE_YUV422_8BIT;
+		break;
+	case HDMIRX_YUV420:
+		store_fmt = STORE_YUV420_8BIT;
+		break;
+	default:
+		store_fmt = STORE_RGB888;
+		break;
+	}
+
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG1,
+			   DDR_STORE_FORMAT_MASK, DDR_STORE_FORMAT(store_fmt));
+	dma_cfg1 = hdmirx_readl(hdmirx_dev, DMA_CONFIG1);
+	v4l2_dbg(1, debug, v4l2_dev, "%s: pix_fmt: %s, DMA_CONFIG1:%#x\n",
+		 __func__, pix_fmt_str[hdmirx_dev->pix_fmt], dma_cfg1);
+}
+
+static void hdmirx_dma_config(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_set_ddr_store_fmt(hdmirx_dev);
+
+	/* Note: uv_swap, rb can not swap, doc err */
+	if (hdmirx_dev->cur_fmt_fourcc != V4L2_PIX_FMT_NV16)
+		hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6, RB_SWAP_EN, RB_SWAP_EN);
+	else
+		hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6, RB_SWAP_EN, 0);
+
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG7,
+			   LOCK_FRAME_NUM_MASK,
+			   LOCK_FRAME_NUM(2));
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG1,
+			   UV_WID_MASK | Y_WID_MASK | ABANDON_EN,
+			   UV_WID(1) | Y_WID(2) | ABANDON_EN);
+}
+
+static void hdmirx_submodule_init(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	/* Note: if not config HDCP2_CONFIG, there will be some errors; */
+	hdmirx_update_bits(hdmirx_dev, HDCP2_CONFIG,
+			   HDCP2_SWITCH_OVR_VALUE |
+			   HDCP2_SWITCH_OVR_EN,
+			   HDCP2_SWITCH_OVR_EN);
+	hdmirx_scdc_init(hdmirx_dev);
+	hdmirx_controller_init(hdmirx_dev);
+}
+
+static int hdmirx_enum_input(struct file *file, void *priv,
+			     struct v4l2_input *input)
+{
+	if (input->index > 0)
+		return -EINVAL;
+
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+	input->std = 0;
+	strscpy(input->name, "HDMI IN", sizeof(input->name));
+	input->capabilities = V4L2_IN_CAP_DV_TIMINGS;
+
+	return 0;
+}
+
+static int hdmirx_get_input(struct file *file, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int hdmirx_set_input(struct file *file, void *priv, unsigned int i)
+{
+	if (i)
+		return -EINVAL;
+	return 0;
+}
+
+static void hdmirx_set_fmt(struct hdmirx_stream *stream,
+			   struct v4l2_pix_format_mplane *pixm, bool try)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	struct v4l2_bt_timings *bt = &hdmirx_dev->timings.bt;
+	const struct v4l2_format_info *finfo;
+	unsigned int imagesize = 0;
+	int i;
+
+	memset(&pixm->plane_fmt[0], 0, sizeof(struct v4l2_plane_pix_format));
+	finfo = v4l2_format_info(pixm->pixelformat);
+	if (!finfo) {
+		finfo = v4l2_format_info(V4L2_PIX_FMT_BGR24);
+		v4l2_dbg(1, debug, v4l2_dev,
+			 "%s: set_fmt:%#x not supported, use def_fmt:%x\n",
+			 __func__, pixm->pixelformat, finfo->format);
+	}
+
+	if (!bt->width || !bt->height)
+		v4l2_dbg(1, debug, v4l2_dev, "%s: invalid resolution:%#xx%#x\n",
+			 __func__, bt->width, bt->height);
+
+	pixm->pixelformat = finfo->format;
+	pixm->width = bt->width;
+	pixm->height = bt->height;
+	pixm->num_planes = finfo->mem_planes;
+	pixm->quantization = V4L2_QUANTIZATION_DEFAULT;
+	pixm->colorspace = V4L2_COLORSPACE_SRGB;
+	pixm->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+
+	if (bt->interlaced == V4L2_DV_INTERLACED)
+		pixm->field = V4L2_FIELD_INTERLACED_TB;
+	else
+		pixm->field = V4L2_FIELD_NONE;
+
+	memset(pixm->reserved, 0, sizeof(pixm->reserved));
+
+	v4l2_fill_pixfmt_mp(pixm, finfo->format, pixm->width, pixm->height);
+
+	for (i = 0; i < finfo->comp_planes; i++) {
+		struct v4l2_plane_pix_format *plane_fmt;
+		int width, height, bpl, size, bpp = 0;
+		const unsigned int hw_align = 64;
+
+		if (!i) {
+			width = pixm->width;
+			height = pixm->height;
+		} else {
+			width = pixm->width / finfo->hdiv;
+			height = pixm->height / finfo->vdiv;
+		}
+
+		switch (finfo->format) {
+		case V4L2_PIX_FMT_NV24:
+		case V4L2_PIX_FMT_NV16:
+		case V4L2_PIX_FMT_NV12:
+		case V4L2_PIX_FMT_BGR24:
+			bpp = finfo->bpp[i];
+			break;
+		default:
+			v4l2_dbg(1, debug, v4l2_dev,
+				 "fourcc: %#x is not supported\n",
+				 finfo->format);
+			break;
+		}
+
+		bpl = ALIGN(width * bpp, hw_align);
+		size = bpl * height;
+		imagesize += size;
+
+		if (finfo->mem_planes > i) {
+			/* Set bpl and size for each mplane */
+			plane_fmt = pixm->plane_fmt + i;
+			plane_fmt->bytesperline = bpl;
+			plane_fmt->sizeimage = size;
+		}
+
+		v4l2_dbg(1, debug, v4l2_dev,
+			 "C-Plane %i size: %d, Total imagesize: %d\n",
+			 i, size, imagesize);
+	}
+
+	/* Convert to non-MPLANE format as we want to unify non-MPLANE and MPLANE */
+	if (finfo->mem_planes == 1)
+		pixm->plane_fmt[0].sizeimage = imagesize;
+
+	if (!try) {
+		stream->out_finfo = finfo;
+		stream->pixm = *pixm;
+		v4l2_dbg(1, debug, v4l2_dev,
+			 "%s: req(%d, %d), out(%d, %d), fmt:%#x\n", __func__,
+			 pixm->width, pixm->height, stream->pixm.width,
+			 stream->pixm.height, finfo->format);
+	}
+}
+
+static int hdmirx_enum_fmt_vid_cap_mplane(struct file *file, void *priv,
+					  struct v4l2_fmtdesc *f)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+
+	if (f->index >= 1)
+		return -EINVAL;
+
+	f->pixelformat = hdmirx_dev->cur_fmt_fourcc;
+
+	return 0;
+}
+
+static int hdmirx_s_fmt_vid_cap_mplane(struct file *file,
+				       void *priv, struct v4l2_format *f)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	if (vb2_is_busy(&stream->buf_queue)) {
+		v4l2_err(v4l2_dev, "%s: queue busy\n", __func__);
+		return -EBUSY;
+	}
+
+	hdmirx_set_fmt(stream, &f->fmt.pix_mp, false);
+
+	return 0;
+}
+
+static int hdmirx_g_fmt_vid_cap_mplane(struct file *file, void *fh,
+				       struct v4l2_format *f)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_pix_format_mplane pixm = {};
+
+	pixm.pixelformat = hdmirx_dev->cur_fmt_fourcc;
+	hdmirx_set_fmt(stream, &pixm, true);
+	f->fmt.pix_mp = pixm;
+
+	return 0;
+}
+
+static int hdmirx_g_dv_timings(struct file *file, void *_fh,
+			       struct v4l2_dv_timings *timings)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 dma_cfg1;
+
+	*timings = hdmirx_dev->timings;
+	dma_cfg1 = hdmirx_readl(hdmirx_dev, DMA_CONFIG1);
+	v4l2_dbg(1, debug, v4l2_dev, "%s: pix_fmt: %s, DMA_CONFIG1:%#x\n",
+		 __func__, pix_fmt_str[hdmirx_dev->pix_fmt], dma_cfg1);
+
+	return 0;
+}
+
+static int hdmirx_s_dv_timings(struct file *file, void *_fh,
+			       struct v4l2_dv_timings *timings)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	if (!timings)
+		return -EINVAL;
+
+	if (debug)
+		v4l2_print_dv_timings(hdmirx_dev->v4l2_dev.name,
+				      "s_dv_timings: ", timings, false);
+
+	if (!v4l2_valid_dv_timings(timings, &hdmirx_timings_cap, NULL, NULL)) {
+		v4l2_dbg(1, debug, v4l2_dev,
+			 "%s: timings out of range\n", __func__);
+		return -ERANGE;
+	}
+
+	/* Check if the timings are part of the CEA-861 timings. */
+	v4l2_find_dv_timings_cap(timings, &hdmirx_timings_cap, 0, NULL, NULL);
+
+	if (v4l2_match_dv_timings(&hdmirx_dev->timings, timings, 0, false)) {
+		v4l2_dbg(1, debug, v4l2_dev, "%s: no change\n", __func__);
+		return 0;
+	}
+
+	/*
+	 * Changing the timings implies a format change, which is not allowed
+	 * while buffers for use with streaming have already been allocated.
+	 */
+	if (vb2_is_busy(&stream->buf_queue))
+		return -EBUSY;
+
+	hdmirx_dev->timings = *timings;
+	/* Update the internal format */
+	hdmirx_set_fmt(stream, &stream->pixm, false);
+
+	return 0;
+}
+
+static int hdmirx_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct device *dev = stream->hdmirx_dev->dev;
+
+	strscpy(cap->driver, dev->driver->name, sizeof(cap->driver));
+	strscpy(cap->card, dev->driver->name, sizeof(cap->card));
+
+	return 0;
+}
+
+static int hdmirx_queue_setup(struct vb2_queue *queue,
+			      unsigned int *num_buffers,
+			      unsigned int *num_planes,
+			      unsigned int sizes[],
+			      struct device *alloc_ctxs[])
+{
+	struct hdmirx_stream *stream = vb2_get_drv_priv(queue);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	const struct v4l2_pix_format_mplane *pixm = NULL;
+	const struct v4l2_format_info *out_finfo;
+	u32 i;
+
+	pixm = &stream->pixm;
+	out_finfo = stream->out_finfo;
+
+	if (!out_finfo) {
+		v4l2_err(v4l2_dev, "%s: out_fmt not set\n", __func__);
+		return -EINVAL;
+	}
+
+	if (*num_planes) {
+		if (*num_planes != pixm->num_planes)
+			return -EINVAL;
+
+		for (i = 0; i < *num_planes; i++)
+			if (sizes[i] < pixm->plane_fmt[i].sizeimage)
+				return -EINVAL;
+		return 0;
+	}
+
+	*num_planes = out_finfo->mem_planes;
+
+	for (i = 0; i < out_finfo->mem_planes; i++)
+		sizes[i] = pixm->plane_fmt[i].sizeimage;
+
+	v4l2_dbg(1, debug, v4l2_dev, "%s: count %d, size %d\n",
+		 v4l2_type_names[queue->type], *num_buffers, sizes[0]);
+
+	return 0;
+}
+
+/*
+ * The vb2_buffer are stored in hdmirx_buffer, in order to unify
+ * mplane buffer and none-mplane buffer.
+ */
+static void hdmirx_buf_queue(struct vb2_buffer *vb)
+{
+	const struct v4l2_pix_format_mplane *pixm;
+	const struct v4l2_format_info *out_finfo;
+	struct hdmirx_buffer *hdmirx_buf;
+	struct vb2_v4l2_buffer *vbuf;
+	struct hdmirx_stream *stream;
+	struct vb2_queue *queue;
+	unsigned long flags;
+	int i;
+
+	vbuf = to_vb2_v4l2_buffer(vb);
+	hdmirx_buf = container_of(vbuf, struct hdmirx_buffer, vb);
+	queue = vb->vb2_queue;
+	stream = vb2_get_drv_priv(queue);
+	pixm = &stream->pixm;
+	out_finfo = stream->out_finfo;
+
+	memset(hdmirx_buf->buff_addr, 0, sizeof(hdmirx_buf->buff_addr));
+
+	/*
+	 * If mplanes > 1, every c-plane has its own m-plane,
+	 * otherwise, multiple c-planes are in the same m-plane
+	 */
+	for (i = 0; i < out_finfo->mem_planes; i++)
+		hdmirx_buf->buff_addr[i] = vb2_dma_contig_plane_dma_addr(vb, i);
+
+	if (out_finfo->mem_planes == 1) {
+		if (out_finfo->comp_planes == 1) {
+			hdmirx_buf->buff_addr[HDMIRX_PLANE_CBCR] =
+				hdmirx_buf->buff_addr[HDMIRX_PLANE_Y];
+		} else {
+			for (i = 0; i < out_finfo->comp_planes - 1; i++)
+				hdmirx_buf->buff_addr[i + 1] =
+					hdmirx_buf->buff_addr[i] +
+					pixm->plane_fmt[i].bytesperline *
+					pixm->height;
+		}
+	}
+
+	spin_lock_irqsave(&stream->vbq_lock, flags);
+	list_add_tail(&hdmirx_buf->queue, &stream->buf_head);
+	spin_unlock_irqrestore(&stream->vbq_lock, flags);
+}
+
+static void return_all_buffers(struct hdmirx_stream *stream,
+			       enum vb2_buffer_state state)
+{
+	struct hdmirx_buffer *buf, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&stream->vbq_lock, flags);
+	if (stream->curr_buf)
+		list_add_tail(&stream->curr_buf->queue, &stream->buf_head);
+	if (stream->next_buf && stream->next_buf != stream->curr_buf)
+		list_add_tail(&stream->next_buf->queue, &stream->buf_head);
+	stream->curr_buf = NULL;
+	stream->next_buf = NULL;
+
+	list_for_each_entry_safe(buf, tmp, &stream->buf_head, queue) {
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, state);
+	}
+	spin_unlock_irqrestore(&stream->vbq_lock, flags);
+}
+
+static void hdmirx_stop_streaming(struct vb2_queue *queue)
+{
+	struct hdmirx_stream *stream = vb2_get_drv_priv(queue);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, v4l2_dev, "stream start stopping\n");
+	mutex_lock(&hdmirx_dev->stream_lock);
+	WRITE_ONCE(stream->stopping, true);
+
+	/* wait last irq to return the buffer */
+	ret = wait_event_timeout(stream->wq_stopped, !stream->stopping,
+				 msecs_to_jiffies(500));
+	if (!ret)
+		v4l2_dbg(1, debug, v4l2_dev, "%s: timeout waiting last irq\n",
+			 __func__);
+
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6, HDMIRX_DMA_EN, 0);
+	return_all_buffers(stream, VB2_BUF_STATE_ERROR);
+	mutex_unlock(&hdmirx_dev->stream_lock);
+	v4l2_dbg(1, debug, v4l2_dev, "stream stopping finished\n");
+}
+
+static int hdmirx_start_streaming(struct vb2_queue *queue, unsigned int count)
+{
+	struct hdmirx_stream *stream = vb2_get_drv_priv(queue);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	struct v4l2_dv_timings timings = hdmirx_dev->timings;
+	struct v4l2_bt_timings *bt = &timings.bt;
+	unsigned long lock_flags = 0;
+	int line_flag;
+
+	mutex_lock(&hdmirx_dev->stream_lock);
+	stream->frame_idx = 0;
+	stream->line_flag_int_cnt = 0;
+	stream->curr_buf = NULL;
+	stream->next_buf = NULL;
+	stream->irq_stat = 0;
+
+	WRITE_ONCE(stream->stopping, false);
+
+	spin_lock_irqsave(&stream->vbq_lock, lock_flags);
+	if (!stream->curr_buf) {
+		if (!list_empty(&stream->buf_head)) {
+			stream->curr_buf = list_first_entry(&stream->buf_head,
+							    struct hdmirx_buffer,
+							    queue);
+			list_del(&stream->curr_buf->queue);
+		} else {
+			stream->curr_buf = NULL;
+		}
+	}
+	spin_unlock_irqrestore(&stream->vbq_lock, lock_flags);
+
+	if (!stream->curr_buf) {
+		mutex_unlock(&hdmirx_dev->stream_lock);
+		return -ENOMEM;
+	}
+
+	v4l2_dbg(2, debug, v4l2_dev,
+		 "%s: start_stream cur_buf y_addr:%#x, uv_addr:%#x\n",
+		 __func__, stream->curr_buf->buff_addr[HDMIRX_PLANE_Y],
+		 stream->curr_buf->buff_addr[HDMIRX_PLANE_CBCR]);
+	hdmirx_writel(hdmirx_dev, DMA_CONFIG2,
+		      stream->curr_buf->buff_addr[HDMIRX_PLANE_Y]);
+	hdmirx_writel(hdmirx_dev, DMA_CONFIG3,
+		      stream->curr_buf->buff_addr[HDMIRX_PLANE_CBCR]);
+
+	if (bt->height) {
+		if (bt->interlaced == V4L2_DV_INTERLACED)
+			line_flag = bt->height / 4;
+		else
+			line_flag = bt->height / 2;
+		hdmirx_update_bits(hdmirx_dev, DMA_CONFIG7,
+				   LINE_FLAG_NUM_MASK,
+				   LINE_FLAG_NUM(line_flag));
+	} else {
+		v4l2_err(v4l2_dev, "height err: %d\n", bt->height);
+	}
+
+	hdmirx_writel(hdmirx_dev, DMA_CONFIG5, 0xffffffff);
+	hdmirx_writel(hdmirx_dev, CED_DYN_CONTROL, 0x1);
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG4,
+			   LINE_FLAG_INT_EN |
+			   HDMIRX_DMA_IDLE_INT |
+			   HDMIRX_LOCK_DISABLE_INT |
+			   LAST_FRAME_AXI_UNFINISH_INT_EN |
+			   FIFO_OVERFLOW_INT_EN |
+			   FIFO_UNDERFLOW_INT_EN |
+			   HDMIRX_AXI_ERROR_INT_EN,
+			   LINE_FLAG_INT_EN |
+			   HDMIRX_DMA_IDLE_INT |
+			   HDMIRX_LOCK_DISABLE_INT |
+			   LAST_FRAME_AXI_UNFINISH_INT_EN |
+			   FIFO_OVERFLOW_INT_EN |
+			   FIFO_UNDERFLOW_INT_EN |
+			   HDMIRX_AXI_ERROR_INT_EN);
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6, HDMIRX_DMA_EN, HDMIRX_DMA_EN);
+	v4l2_dbg(1, debug, v4l2_dev, "%s: enable dma", __func__);
+	mutex_unlock(&hdmirx_dev->stream_lock);
+
+	return 0;
+}
+
+/* vb2 queue */
+static const struct vb2_ops hdmirx_vb2_ops = {
+	.queue_setup = hdmirx_queue_setup,
+	.buf_queue = hdmirx_buf_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.stop_streaming = hdmirx_stop_streaming,
+	.start_streaming = hdmirx_start_streaming,
+};
+
+static int hdmirx_init_vb2_queue(struct vb2_queue *q,
+				 struct hdmirx_stream *stream,
+				 enum v4l2_buf_type buf_type)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+
+	q->type = buf_type;
+	q->io_modes = VB2_MMAP | VB2_DMABUF;
+	q->drv_priv = stream;
+	q->ops = &hdmirx_vb2_ops;
+	q->mem_ops = &vb2_dma_contig_memops;
+	q->buf_struct_size = sizeof(struct hdmirx_buffer);
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &stream->vlock;
+	q->dev = hdmirx_dev->dev;
+	q->min_queued_buffers = 1;
+
+	return vb2_queue_init(q);
+}
+
+/* video device */
+static const struct v4l2_ioctl_ops hdmirx_v4l2_ioctl_ops = {
+	.vidioc_querycap = hdmirx_querycap,
+	.vidioc_try_fmt_vid_cap_mplane = hdmirx_g_fmt_vid_cap_mplane,
+	.vidioc_s_fmt_vid_cap_mplane = hdmirx_s_fmt_vid_cap_mplane,
+	.vidioc_g_fmt_vid_cap_mplane = hdmirx_g_fmt_vid_cap_mplane,
+	.vidioc_enum_fmt_vid_cap = hdmirx_enum_fmt_vid_cap_mplane,
+
+	.vidioc_s_dv_timings = hdmirx_s_dv_timings,
+	.vidioc_g_dv_timings = hdmirx_g_dv_timings,
+	.vidioc_enum_dv_timings = hdmirx_enum_dv_timings,
+	.vidioc_query_dv_timings = hdmirx_query_dv_timings,
+	.vidioc_dv_timings_cap = hdmirx_dv_timings_cap,
+	.vidioc_enum_input = hdmirx_enum_input,
+	.vidioc_g_input = hdmirx_get_input,
+	.vidioc_s_input = hdmirx_set_input,
+	.vidioc_g_edid = hdmirx_get_edid,
+	.vidioc_s_edid = hdmirx_set_edid,
+	.vidioc_g_parm = hdmirx_g_parm,
+
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_expbuf = vb2_ioctl_expbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+
+	.vidioc_log_status = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = hdmirx_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct v4l2_file_operations hdmirx_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.poll = vb2_fop_poll,
+	.mmap = vb2_fop_mmap,
+};
+
+static int hdmirx_register_stream_vdev(struct hdmirx_stream *stream)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	struct video_device *vdev = &stream->vdev;
+	int ret = 0;
+
+	strscpy(vdev->name, "stream_hdmirx", sizeof(vdev->name));
+	INIT_LIST_HEAD(&stream->buf_head);
+	spin_lock_init(&stream->vbq_lock);
+	mutex_init(&stream->vlock);
+	init_waitqueue_head(&stream->wq_stopped);
+	stream->curr_buf = NULL;
+	stream->next_buf = NULL;
+
+	vdev->ioctl_ops = &hdmirx_v4l2_ioctl_ops;
+	vdev->release = video_device_release_empty;
+	vdev->fops = &hdmirx_fops;
+	vdev->minor = -1;
+	vdev->v4l2_dev = v4l2_dev;
+	vdev->lock = &stream->vlock;
+	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
+			    V4L2_CAP_STREAMING;
+	video_set_drvdata(vdev, stream);
+	vdev->vfl_dir = VFL_DIR_RX;
+
+	hdmirx_init_vb2_queue(&stream->buf_queue, stream,
+			      V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
+	vdev->queue = &stream->buf_queue;
+
+	ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "video_register_device failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void process_signal_change(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG6, HDMIRX_DMA_EN, 0);
+	hdmirx_update_bits(hdmirx_dev, DMA_CONFIG4,
+			   LINE_FLAG_INT_EN |
+			   HDMIRX_DMA_IDLE_INT |
+			   HDMIRX_LOCK_DISABLE_INT |
+			   LAST_FRAME_AXI_UNFINISH_INT_EN |
+			   FIFO_OVERFLOW_INT_EN |
+			   FIFO_UNDERFLOW_INT_EN |
+			   HDMIRX_AXI_ERROR_INT_EN, 0);
+	hdmirx_reset_dma(hdmirx_dev);
+	queue_delayed_work(system_unbound_wq,
+			   &hdmirx_dev->delayed_work_res_change,
+			   msecs_to_jiffies(50));
+}
+
+static void avpunit_0_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+				  int status, bool *handled)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	if (status & (CED_DYN_CNT_CH2_IRQ |
+		      CED_DYN_CNT_CH1_IRQ |
+		      CED_DYN_CNT_CH0_IRQ)) {
+		process_signal_change(hdmirx_dev);
+		v4l2_dbg(2, debug, v4l2_dev, "%s: avp0_st:%#x\n",
+			 __func__, status);
+		*handled = true;
+	}
+
+	hdmirx_clear_interrupt(hdmirx_dev, AVPUNIT_0_INT_CLEAR, 0xffffffff);
+	hdmirx_writel(hdmirx_dev, AVPUNIT_0_INT_FORCE, 0x0);
+}
+
+static void avpunit_1_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+				  int status, bool *handled)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	if (status & DEFRAMER_VSYNC_THR_REACHED_IRQ) {
+		v4l2_dbg(2, debug, v4l2_dev,
+			 "Vertical Sync threshold reached interrupt %#x", status);
+		hdmirx_update_bits(hdmirx_dev, AVPUNIT_1_INT_MASK_N,
+				   DEFRAMER_VSYNC_THR_REACHED_MASK_N, 0);
+		*handled = true;
+	}
+}
+
+static void mainunit_0_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+				   int status, bool *handled)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	v4l2_dbg(2, debug, v4l2_dev, "mu0_st:%#x\n", status);
+	if (status & TIMER_BASE_LOCKED_IRQ) {
+		hdmirx_update_bits(hdmirx_dev, MAINUNIT_0_INT_MASK_N,
+				   TIMER_BASE_LOCKED_IRQ, 0);
+		complete(&hdmirx_dev->timer_base_lock);
+		*handled = true;
+	}
+
+	if (status & TMDSQPCLK_OFF_CHG) {
+		process_signal_change(hdmirx_dev);
+		v4l2_dbg(2, debug, v4l2_dev, "%s: TMDSQPCLK_OFF_CHG\n", __func__);
+		*handled = true;
+	}
+
+	if (status & TMDSQPCLK_LOCKED_CHG) {
+		process_signal_change(hdmirx_dev);
+		v4l2_dbg(2, debug, v4l2_dev, "%s: TMDSQPCLK_LOCKED_CHG\n", __func__);
+		*handled = true;
+	}
+
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_0_INT_CLEAR, 0xffffffff);
+	hdmirx_writel(hdmirx_dev, MAINUNIT_0_INT_FORCE, 0x0);
+}
+
+static void mainunit_2_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+				   int status, bool *handled)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	v4l2_dbg(2, debug, v4l2_dev, "mu2_st:%#x\n", status);
+	if (status & PHYCREG_CR_WRITE_DONE) {
+		hdmirx_update_bits(hdmirx_dev, MAINUNIT_2_INT_MASK_N,
+				   PHYCREG_CR_WRITE_DONE, 0);
+		complete(&hdmirx_dev->cr_write_done);
+		*handled = true;
+	}
+
+	if (status & TMDSVALID_STABLE_CHG) {
+		process_signal_change(hdmirx_dev);
+		v4l2_dbg(2, debug, v4l2_dev, "%s: TMDSVALID_STABLE_CHG\n", __func__);
+		*handled = true;
+	}
+
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_2_INT_CLEAR, 0xffffffff);
+	hdmirx_writel(hdmirx_dev, MAINUNIT_2_INT_FORCE, 0x0);
+}
+
+static void pkt_2_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+			      int status, bool *handled)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	v4l2_dbg(2, debug, v4l2_dev, "%s: pk2_st:%#x\n", __func__, status);
+	if (status & PKTDEC_AVIIF_RCV_IRQ) {
+		hdmirx_update_bits(hdmirx_dev, PKT_2_INT_MASK_N,
+				   PKTDEC_AVIIF_RCV_IRQ, 0);
+		complete(&hdmirx_dev->avi_pkt_rcv);
+		v4l2_dbg(2, debug, v4l2_dev, "%s: AVIIF_RCV_IRQ\n", __func__);
+		*handled = true;
+	}
+
+	hdmirx_clear_interrupt(hdmirx_dev, PKT_2_INT_CLEAR, 0xffffffff);
+}
+
+static void scdc_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+			     int status, bool *handled)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	v4l2_dbg(2, debug, v4l2_dev, "%s: scdc_st:%#x\n", __func__, status);
+	if (status & SCDCTMDSCCFG_CHG) {
+		hdmirx_tmds_clk_ratio_config(hdmirx_dev);
+		*handled = true;
+	}
+
+	hdmirx_clear_interrupt(hdmirx_dev, SCDC_INT_CLEAR, 0xffffffff);
+}
+
+static irqreturn_t hdmirx_hdmi_irq_handler(int irq, void *dev_id)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = dev_id;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 mu0_st, mu2_st, pk2_st, scdc_st, avp1_st, avp0_st;
+	u32 mu0_mask, mu2_mask, pk2_mask, scdc_mask, avp1_msk, avp0_msk;
+	bool handled = false;
+
+	mu0_mask = hdmirx_readl(hdmirx_dev, MAINUNIT_0_INT_MASK_N);
+	mu2_mask = hdmirx_readl(hdmirx_dev, MAINUNIT_2_INT_MASK_N);
+	pk2_mask = hdmirx_readl(hdmirx_dev, PKT_2_INT_MASK_N);
+	scdc_mask = hdmirx_readl(hdmirx_dev, SCDC_INT_MASK_N);
+	mu0_st = hdmirx_readl(hdmirx_dev, MAINUNIT_0_INT_STATUS);
+	mu2_st = hdmirx_readl(hdmirx_dev, MAINUNIT_2_INT_STATUS);
+	pk2_st = hdmirx_readl(hdmirx_dev, PKT_2_INT_STATUS);
+	scdc_st = hdmirx_readl(hdmirx_dev, SCDC_INT_STATUS);
+	avp0_st = hdmirx_readl(hdmirx_dev, AVPUNIT_0_INT_STATUS);
+	avp1_st = hdmirx_readl(hdmirx_dev, AVPUNIT_1_INT_STATUS);
+	avp0_msk = hdmirx_readl(hdmirx_dev, AVPUNIT_0_INT_MASK_N);
+	avp1_msk = hdmirx_readl(hdmirx_dev, AVPUNIT_1_INT_MASK_N);
+	mu0_st &= mu0_mask;
+	mu2_st &= mu2_mask;
+	pk2_st &= pk2_mask;
+	avp1_st &= avp1_msk;
+	avp0_st &= avp0_msk;
+	scdc_st &= scdc_mask;
+
+	if (avp0_st)
+		avpunit_0_int_handler(hdmirx_dev, avp0_st, &handled);
+	if (avp1_st)
+		avpunit_1_int_handler(hdmirx_dev, avp1_st, &handled);
+	if (mu0_st)
+		mainunit_0_int_handler(hdmirx_dev, mu0_st, &handled);
+	if (mu2_st)
+		mainunit_2_int_handler(hdmirx_dev, mu2_st, &handled);
+	if (pk2_st)
+		pkt_2_int_handler(hdmirx_dev, pk2_st, &handled);
+	if (scdc_st)
+		scdc_int_handler(hdmirx_dev, scdc_st, &handled);
+
+	if (!handled) {
+		v4l2_dbg(2, debug, v4l2_dev, "%s: hdmi irq not handled", __func__);
+		v4l2_dbg(2, debug, v4l2_dev,
+			 "avp0:%#x, avp1:%#x, mu0:%#x, mu2:%#x, pk2:%#x, scdc:%#x\n",
+			 avp0_st, avp1_st, mu0_st, mu2_st, pk2_st, scdc_st);
+	}
+
+	v4l2_dbg(2, debug, v4l2_dev, "%s: en_fiq", __func__);
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void hdmirx_vb_done(struct hdmirx_stream *stream,
+			   struct vb2_v4l2_buffer *vb_done)
+{
+	const struct v4l2_format_info *finfo = stream->out_finfo;
+	u32 i;
+
+	/* Dequeue a filled buffer */
+	for (i = 0; i < finfo->mem_planes; i++) {
+		vb2_set_plane_payload(&vb_done->vb2_buf, i,
+				      stream->pixm.plane_fmt[i].sizeimage);
+	}
+
+	vb_done->vb2_buf.timestamp = ktime_get_ns();
+	vb2_buffer_done(&vb_done->vb2_buf, VB2_BUF_STATE_DONE);
+}
+
+static void dma_idle_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+				 bool *handled)
+{
+	struct hdmirx_stream *stream = &hdmirx_dev->stream;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	struct v4l2_dv_timings timings = hdmirx_dev->timings;
+	struct v4l2_bt_timings *bt = &timings.bt;
+	struct vb2_v4l2_buffer *vb_done = NULL;
+
+	if (!(stream->irq_stat) && !(stream->irq_stat & LINE_FLAG_INT_EN))
+		v4l2_dbg(1, debug, v4l2_dev,
+			 "%s: last time have no line_flag_irq\n", __func__);
+
+	if (stream->line_flag_int_cnt <= FILTER_FRAME_CNT)
+		goto DMA_IDLE_OUT;
+
+	if (bt->interlaced != V4L2_DV_INTERLACED ||
+	    !(stream->line_flag_int_cnt % 2)) {
+		if (stream->next_buf) {
+			if (stream->curr_buf)
+				vb_done = &stream->curr_buf->vb;
+
+			if (vb_done) {
+				vb_done->vb2_buf.timestamp = ktime_get_ns();
+				vb_done->sequence = stream->frame_idx;
+
+				if (bt->interlaced)
+					vb_done->field = V4L2_FIELD_INTERLACED_TB;
+				else
+					vb_done->field = V4L2_FIELD_NONE;
+
+				hdmirx_vb_done(stream, vb_done);
+				stream->frame_idx++;
+				if (stream->frame_idx == 30)
+					v4l2_dbg(1, debug, v4l2_dev,
+						 "rcv frames\n");
+			}
+
+			stream->curr_buf = NULL;
+			if (stream->next_buf) {
+				stream->curr_buf = stream->next_buf;
+				stream->next_buf = NULL;
+			}
+		} else {
+			v4l2_dbg(3, debug, v4l2_dev,
+				 "%s: next_buf NULL, skip vb_done\n", __func__);
+		}
+	}
+
+DMA_IDLE_OUT:
+	*handled = true;
+}
+
+static void line_flag_int_handler(struct snps_hdmirx_dev *hdmirx_dev,
+				  bool *handled)
+{
+	struct hdmirx_stream *stream = &hdmirx_dev->stream;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	struct v4l2_dv_timings timings = hdmirx_dev->timings;
+	struct v4l2_bt_timings *bt = &timings.bt;
+	u32 dma_cfg6;
+
+	stream->line_flag_int_cnt++;
+	if (!(stream->irq_stat) && !(stream->irq_stat & HDMIRX_DMA_IDLE_INT))
+		v4l2_dbg(1, debug, v4l2_dev,
+			 "%s: last have no dma_idle_irq\n", __func__);
+	dma_cfg6 = hdmirx_readl(hdmirx_dev, DMA_CONFIG6);
+	if (!(dma_cfg6 & HDMIRX_DMA_EN)) {
+		v4l2_dbg(2, debug, v4l2_dev, "%s: dma not on\n", __func__);
+		goto LINE_FLAG_OUT;
+	}
+
+	if (stream->line_flag_int_cnt <= FILTER_FRAME_CNT)
+		goto LINE_FLAG_OUT;
+
+	if (bt->interlaced != V4L2_DV_INTERLACED ||
+	    !(stream->line_flag_int_cnt % 2)) {
+		if (!stream->next_buf) {
+			spin_lock(&stream->vbq_lock);
+			if (!list_empty(&stream->buf_head)) {
+				stream->next_buf = list_first_entry(&stream->buf_head,
+								    struct hdmirx_buffer,
+								    queue);
+				list_del(&stream->next_buf->queue);
+			} else {
+				stream->next_buf = NULL;
+			}
+			spin_unlock(&stream->vbq_lock);
+
+			if (stream->next_buf) {
+				hdmirx_writel(hdmirx_dev, DMA_CONFIG2,
+					      stream->next_buf->buff_addr[HDMIRX_PLANE_Y]);
+				hdmirx_writel(hdmirx_dev, DMA_CONFIG3,
+					      stream->next_buf->buff_addr[HDMIRX_PLANE_CBCR]);
+			} else {
+				v4l2_dbg(3, debug, v4l2_dev,
+					 "%s: no buffer is available\n", __func__);
+			}
+		}
+	} else {
+		v4l2_dbg(3, debug, v4l2_dev, "%s: interlace:%d, line_flag_int_cnt:%d\n",
+			 __func__, bt->interlaced, stream->line_flag_int_cnt);
+	}
+
+LINE_FLAG_OUT:
+	*handled = true;
+}
+
+static irqreturn_t hdmirx_dma_irq_handler(int irq, void *dev_id)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = dev_id;
+	struct hdmirx_stream *stream = &hdmirx_dev->stream;
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 dma_stat1, dma_stat13;
+	bool handled = false;
+
+	dma_stat1 = hdmirx_readl(hdmirx_dev, DMA_STATUS1);
+	dma_stat13 = hdmirx_readl(hdmirx_dev, DMA_STATUS13);
+	v4l2_dbg(3, debug, v4l2_dev, "dma_irq st1:%#x, st13:%d\n",
+		 dma_stat1, dma_stat13);
+
+	if (READ_ONCE(stream->stopping)) {
+		v4l2_dbg(1, debug, v4l2_dev, "%s: stop stream\n", __func__);
+		hdmirx_writel(hdmirx_dev, DMA_CONFIG5, 0xffffffff);
+		hdmirx_update_bits(hdmirx_dev, DMA_CONFIG4,
+				   LINE_FLAG_INT_EN |
+				   HDMIRX_DMA_IDLE_INT |
+				   HDMIRX_LOCK_DISABLE_INT |
+				   LAST_FRAME_AXI_UNFINISH_INT_EN |
+				   FIFO_OVERFLOW_INT_EN |
+				   FIFO_UNDERFLOW_INT_EN |
+				   HDMIRX_AXI_ERROR_INT_EN, 0);
+		WRITE_ONCE(stream->stopping, false);
+		wake_up(&stream->wq_stopped);
+		return IRQ_HANDLED;
+	}
+
+	if (dma_stat1 & HDMIRX_DMA_IDLE_INT)
+		dma_idle_int_handler(hdmirx_dev, &handled);
+
+	if (dma_stat1 & LINE_FLAG_INT_EN)
+		line_flag_int_handler(hdmirx_dev, &handled);
+
+	if (!handled)
+		v4l2_dbg(3, debug, v4l2_dev,
+			 "%s: dma irq not handled, dma_stat1:%#x\n",
+			 __func__, dma_stat1);
+
+	stream->irq_stat = dma_stat1;
+	hdmirx_writel(hdmirx_dev, DMA_CONFIG5, 0xffffffff);
+
+	return IRQ_HANDLED;
+}
+
+static int hdmirx_wait_signal_lock(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	u32 mu_status, scdc_status, dma_st10, cmu_st;
+	u32 i;
+
+	for (i = 0; i < 300; i++) {
+		mu_status = hdmirx_readl(hdmirx_dev, MAINUNIT_STATUS);
+		scdc_status = hdmirx_readl(hdmirx_dev, SCDC_REGBANK_STATUS3);
+		dma_st10 = hdmirx_readl(hdmirx_dev, DMA_STATUS10);
+		cmu_st = hdmirx_readl(hdmirx_dev, CMU_STATUS);
+
+		if ((mu_status & TMDSVALID_STABLE_ST) &&
+		    (dma_st10 & HDMIRX_LOCK) &&
+		    (cmu_st & TMDSQPCLK_LOCKED_ST))
+			break;
+
+		if (!tx_5v_power_present(hdmirx_dev)) {
+			v4l2_dbg(1, debug, v4l2_dev,
+				 "%s: HDMI pull out, return\n", __func__);
+			return -1;
+		}
+
+		hdmirx_tmds_clk_ratio_config(hdmirx_dev);
+	}
+
+	if (i == 300) {
+		v4l2_err(v4l2_dev, "%s: signal not lock, tmds_clk_ratio:%d\n",
+			 __func__, hdmirx_dev->tmds_clk_ratio);
+		v4l2_err(v4l2_dev, "%s: mu_st:%#x, scdc_st:%#x, dma_st10:%#x\n",
+			 __func__, mu_status, scdc_status, dma_st10);
+		return -1;
+	}
+
+	v4l2_dbg(1, debug, v4l2_dev, "%s: signal lock ok, i:%d\n", __func__, i);
+	hdmirx_writel(hdmirx_dev, GLOBAL_SWRESET_REQUEST, DATAPATH_SWRESETREQ);
+
+	reinit_completion(&hdmirx_dev->avi_pkt_rcv);
+	hdmirx_clear_interrupt(hdmirx_dev, PKT_2_INT_CLEAR, 0xffffffff);
+	hdmirx_update_bits(hdmirx_dev, PKT_2_INT_MASK_N,
+			   PKTDEC_AVIIF_RCV_IRQ, PKTDEC_AVIIF_RCV_IRQ);
+
+	if (!wait_for_completion_timeout(&hdmirx_dev->avi_pkt_rcv,
+					 msecs_to_jiffies(300))) {
+		v4l2_err(v4l2_dev, "%s wait avi_pkt_rcv failed\n", __func__);
+		hdmirx_update_bits(hdmirx_dev, PKT_2_INT_MASK_N,
+				   PKTDEC_AVIIF_RCV_IRQ, 0);
+	}
+
+	msleep(50);
+	hdmirx_format_change(hdmirx_dev);

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 2164

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+
+	return 0;
+}
+
+static void hdmirx_plugin(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_submodule_init(hdmirx_dev);
+	hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, POWERPROVIDED,
+			   POWERPROVIDED);
+	hdmirx_hpd_ctrl(hdmirx_dev, true);

Just because the 5V appeared, it doesn't mean that the HPD should go high. That depends on whether there is an EDID or not.

As I said above, the whole 5V/HPD handling seems confused in this driver.

Quoted 38 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +38 -0
+	hdmirx_phy_config(hdmirx_dev);
+	hdmirx_interrupts_setup(hdmirx_dev, true);
+}
+
+static void hdmirx_delayed_work_hotplug(struct work_struct *work)
+{
+	struct snps_hdmirx_dev *hdmirx_dev;
+	bool plugin;
+
+	hdmirx_dev = container_of(work, struct snps_hdmirx_dev,
+				  delayed_work_hotplug.work);
+
+	mutex_lock(&hdmirx_dev->work_lock);
+	plugin = tx_5v_power_present(hdmirx_dev);
+	v4l2_ctrl_s_ctrl(hdmirx_dev->detect_tx_5v_ctrl, plugin);
+	v4l2_dbg(1, debug, &hdmirx_dev->v4l2_dev, "%s: plugin:%d\n",
+		 __func__, plugin);
+
+	if (plugin)
+		hdmirx_plugin(hdmirx_dev);
+	else
+		hdmirx_plugout(hdmirx_dev);
+
+	mutex_unlock(&hdmirx_dev->work_lock);
+}
+
+static void hdmirx_delayed_work_res_change(struct work_struct *work)
+{
+	struct snps_hdmirx_dev *hdmirx_dev;
+	bool plugin;
+
+	hdmirx_dev = container_of(work, struct snps_hdmirx_dev,
+				  delayed_work_res_change.work);
+
+	mutex_lock(&hdmirx_dev->work_lock);
+	plugin = tx_5v_power_present(hdmirx_dev);
+	v4l2_dbg(1, debug, &hdmirx_dev->v4l2_dev, "%s: plugin:%d\n",
+		 __func__, plugin);

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 2212

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+	if (plugin) {
+		hdmirx_interrupts_setup(hdmirx_dev, false);
+		hdmirx_submodule_init(hdmirx_dev);
+		hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, POWERPROVIDED,
+				   POWERPROVIDED);
+		hdmirx_hpd_ctrl(hdmirx_dev, true);
+		hdmirx_phy_config(hdmirx_dev);
+
+		if (hdmirx_wait_signal_lock(hdmirx_dev)) {
+			hdmirx_plugout(hdmirx_dev);

plugout() pulls the HPD low, but why? That has nothing to do with the signal lock.

You need to take a good look at the 5V/HPD handling, this isn't right.

Feel free to ask questions if you are not clear on how it should behave.

drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h

Quoted 1,246 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +506 -0
+			queue_delayed_work(system_unbound_wq,
+					   &hdmirx_dev->delayed_work_hotplug,
+					   msecs_to_jiffies(200));
+		} else {
+			hdmirx_dma_config(hdmirx_dev);
+			hdmirx_interrupts_setup(hdmirx_dev, true);
+		}
+	}
+	mutex_unlock(&hdmirx_dev->work_lock);
+}
+
+static irqreturn_t hdmirx_5v_det_irq_handler(int irq, void *dev_id)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = dev_id;
+	u32 val;
+
+	val = gpiod_get_value(hdmirx_dev->detect_5v_gpio);
+	v4l2_dbg(3, debug, &hdmirx_dev->v4l2_dev, "%s: 5v:%d\n", __func__, val);
+
+	queue_delayed_work(system_unbound_wq,
+			   &hdmirx_dev->delayed_work_hotplug,
+			   msecs_to_jiffies(10));
+
+	return IRQ_HANDLED;
+}
+
+static const struct hdmirx_cec_ops hdmirx_cec_ops = {
+	.write = hdmirx_writel,
+	.read = hdmirx_readl,
+};
+
+static int hdmirx_parse_dt(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct device *dev = hdmirx_dev->dev;
+	int ret;
+
+	hdmirx_dev->num_clks = devm_clk_bulk_get_all(dev, &hdmirx_dev->clks);
+	if (hdmirx_dev->num_clks < 1)
+		return -ENODEV;
+
+	hdmirx_dev->resets[HDMIRX_RST_A].id = "axi";
+	hdmirx_dev->resets[HDMIRX_RST_P].id = "apb";
+	hdmirx_dev->resets[HDMIRX_RST_REF].id = "ref";
+	hdmirx_dev->resets[HDMIRX_RST_BIU].id = "biu";
+
+	ret = devm_reset_control_bulk_get_exclusive(dev, HDMIRX_NUM_RST,
+						    hdmirx_dev->resets);
+	if (ret < 0) {
+		dev_err(dev, "failed to get reset controls\n");
+		return ret;
+	}
+
+	hdmirx_dev->detect_5v_gpio =
+		devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
+
+	if (IS_ERR(hdmirx_dev->detect_5v_gpio)) {
+		dev_err(dev, "failed to get hdmirx hot plug detection gpio\n");
+		return PTR_ERR(hdmirx_dev->detect_5v_gpio);
+	}
+
+	hdmirx_dev->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							  "rockchip,grf");
+	if (IS_ERR(hdmirx_dev->grf)) {
+		dev_err(dev, "failed to get rockchip,grf\n");
+		return PTR_ERR(hdmirx_dev->grf);
+	}
+
+	hdmirx_dev->vo1_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							      "rockchip,vo1-grf");
+	if (IS_ERR(hdmirx_dev->vo1_grf)) {
+		dev_err(dev, "failed to get rockchip,vo1-grf\n");
+		return PTR_ERR(hdmirx_dev->vo1_grf);
+	}
+
+	if (!device_property_read_bool(dev, "hpd-is-active-low"))
+		hdmirx_dev->hpd_trigger_level_high = true;
+
+	ret = of_reserved_mem_device_init(dev);
+	if (ret)
+		dev_warn(dev, "No reserved memory for HDMIRX, use default CMA\n");
+
+	return 0;
+}
+
+static void hdmirx_disable_all_interrupts(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_writel(hdmirx_dev, MAINUNIT_0_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, MAINUNIT_1_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, MAINUNIT_2_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, AVPUNIT_0_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, AVPUNIT_1_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, PKT_0_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, PKT_1_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, PKT_2_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, SCDC_INT_MASK_N, 0);
+	hdmirx_writel(hdmirx_dev, CEC_INT_MASK_N, 0);
+
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_0_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_1_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, MAINUNIT_2_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, AVPUNIT_0_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, AVPUNIT_1_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, PKT_0_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, PKT_1_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, PKT_2_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, SCDC_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, HDCP_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, HDCP_1_INT_CLEAR, 0xffffffff);
+	hdmirx_clear_interrupt(hdmirx_dev, CEC_INT_CLEAR, 0xffffffff);
+}
+
+static int hdmirx_init(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_update_bits(hdmirx_dev, PHY_CONFIG, PHY_RESET | PHY_PDDQ, 0);
+
+	regmap_write(hdmirx_dev->vo1_grf, VO1_GRF_VO1_CON2,
+		     (HDMIRX_SDAIN_MSK | HDMIRX_SCLIN_MSK) |
+		     ((HDMIRX_SDAIN_MSK | HDMIRX_SCLIN_MSK) << 16));
+	/*
+	 * Some interrupts are enabled by default, so we disable
+	 * all interrupts and clear interrupts status first.
+	 */
+	hdmirx_disable_all_interrupts(hdmirx_dev);
+
+	return 0;
+}
+
+/* hdmi-4k-300mhz EDID produced by v4l2-ctl tool */
+static u8 __maybe_unused edid_default[] = {
+	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+	0x31, 0xd8, 0x34, 0x12, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x1a, 0x01, 0x03, 0x80, 0x60, 0x36, 0x78,
+	0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26,
+	0x0f, 0x50, 0x54, 0x2f, 0xcf, 0x00, 0x31, 0x59,
+	0x45, 0x59, 0x81, 0x80, 0x81, 0x40, 0x90, 0x40,
+	0x95, 0x00, 0xa9, 0x40, 0xb3, 0x00, 0x04, 0x74,
+	0x00, 0x30, 0xf2, 0x70, 0x5a, 0x80, 0xb0, 0x58,
+	0x8a, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00, 0x1e,
+	0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18,
+	0x87, 0x1e, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20,
+	0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x68,
+	0x64, 0x6d, 0x69, 0x2d, 0x34, 0x6b, 0x2d, 0x33,
+	0x30, 0x30, 0x0a, 0x20, 0x00, 0x00, 0x00, 0x10,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc5,
+
+	0x02, 0x03, 0x40, 0xf1, 0x4f, 0x5f, 0x5e, 0x5d,
+	0x10, 0x1f, 0x04, 0x13, 0x22, 0x21, 0x20, 0x05,
+	0x14, 0x02, 0x11, 0x01, 0x23, 0x09, 0x07, 0x07,
+	0x83, 0x01, 0x00, 0x00, 0x6d, 0x03, 0x0c, 0x00,
+	0x10, 0x00, 0x00, 0x3c, 0x21, 0x00, 0x60, 0x01,
+	0x02, 0x03, 0x67, 0xd8, 0x5d, 0xc4, 0x01, 0x00,
+	0x00, 0x00, 0xe2, 0x00, 0xca, 0xe3, 0x05, 0x00,
+	0x00, 0xe3, 0x06, 0x01, 0x00, 0xe2, 0x0d, 0x5f,
+	0xa3, 0x66, 0x00, 0xa0, 0xf0, 0x70, 0x1f, 0x80,
+	0x30, 0x20, 0x35, 0x00, 0xc0, 0x1c, 0x32, 0x00,
+	0x00, 0x1e, 0x1a, 0x36, 0x80, 0xa0, 0x70, 0x38,
+	0x1f, 0x40, 0x30, 0x20, 0x35, 0x00, 0xc0, 0x1c,
+	0x32, 0x00, 0x00, 0x1a, 0x1a, 0x1d, 0x00, 0x80,
+	0x51, 0xd0, 0x1c, 0x20, 0x40, 0x80, 0x35, 0x00,
+	0xc0, 0x1c, 0x32, 0x00, 0x00, 0x1c, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa1
+};
+
+static void hdmirx_load_default_edid(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	struct v4l2_edid def_edid;
+
+	hdmirx_hpd_ctrl(hdmirx_dev, false);
+
+	if (!IS_ENABLED(CONFIG_VIDEO_SYNOPSYS_HDMIRX_LOAD_DEFAULT_EDID)) {
+		hdmirx_dev->hpd_pull_low = true;
+		return;
+	}
+
+	/* disable hpd and write edid */
+	def_edid.pad = 0;
+	def_edid.start_block = 0;
+	def_edid.blocks = EDID_NUM_BLOCKS_MAX;
+	def_edid.edid = edid_default;
+
+	hdmirx_write_edid(hdmirx_dev, &def_edid);
+
+	if (tx_5v_power_present(hdmirx_dev))
+		hdmirx_hpd_ctrl(hdmirx_dev, true);
+}
+
+static int hdmirx_disable(struct device *dev)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = dev_get_drvdata(dev);
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+
+	clk_bulk_disable_unprepare(hdmirx_dev->num_clks, hdmirx_dev->clks);
+
+	v4l2_dbg(2, debug, v4l2_dev, "%s: suspend\n", __func__);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int hdmirx_enable(struct device *dev)
+{
+	struct snps_hdmirx_dev *hdmirx_dev = dev_get_drvdata(dev);
+	struct v4l2_device *v4l2_dev = &hdmirx_dev->v4l2_dev;
+	int ret;
+
+	v4l2_dbg(2, debug, v4l2_dev, "%s: resume\n", __func__);
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(hdmirx_dev->num_clks, hdmirx_dev->clks);
+	if (ret) {
+		dev_err(dev, "failed to enable hdmirx bulk clks: %d\n", ret);
+		return ret;
+	}
+
+	reset_control_bulk_assert(HDMIRX_NUM_RST, hdmirx_dev->resets);
+	usleep_range(150, 160);
+	reset_control_bulk_deassert(HDMIRX_NUM_RST, hdmirx_dev->resets);
+	usleep_range(150, 160);
+
+	return 0;
+}
+
+static __maybe_unused int hdmirx_suspend(struct device *dev)
+{
+	hdmirx_disable_irq(dev);
+
+	return hdmirx_disable(dev);
+}
+
+static __maybe_unused int hdmirx_resume(struct device *dev)
+{
+	int ret = hdmirx_enable(dev);
+
+	if (ret)
+		return ret;
+
+	hdmirx_enable_irq(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops snps_hdmirx_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(hdmirx_suspend, hdmirx_resume)
+};
+
+static int hdmirx_setup_irq(struct snps_hdmirx_dev *hdmirx_dev,
+			    struct platform_device *pdev)
+{
+	struct device *dev = hdmirx_dev->dev;
+	int ret, irq;
+
+	irq = platform_get_irq_byname(pdev, "hdmi");
+	if (irq < 0) {
+		dev_err_probe(dev, irq, "failed to get hdmi irq\n");
+		return irq;
+	}
+
+	irq_set_status_flags(irq, IRQ_NOAUTOEN);
+
+	hdmirx_dev->hdmi_irq = irq;
+	ret = devm_request_irq(dev, irq, hdmirx_hdmi_irq_handler, 0,
+			       "rk_hdmirx-hdmi", hdmirx_dev);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to request hdmi irq\n");
+		return ret;
+	}
+
+	irq = platform_get_irq_byname(pdev, "dma");
+	if (irq < 0) {
+		dev_err_probe(dev, irq, "failed to get dma irq\n");
+		return irq;
+	}
+
+	irq_set_status_flags(irq, IRQ_NOAUTOEN);
+
+	hdmirx_dev->dma_irq = irq;
+	ret = devm_request_threaded_irq(dev, irq, NULL, hdmirx_dma_irq_handler,
+					IRQF_ONESHOT, "rk_hdmirx-dma",
+					hdmirx_dev);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to request dma irq\n");
+		return ret;
+	}
+
+	irq = gpiod_to_irq(hdmirx_dev->detect_5v_gpio);
+	if (irq < 0) {
+		dev_err_probe(dev, irq, "failed to get hdmirx-5v irq\n");
+		return irq;
+	}
+
+	irq_set_status_flags(irq, IRQ_NOAUTOEN);
+
+	hdmirx_dev->det_irq = irq;
+	ret = devm_request_irq(dev, irq, hdmirx_5v_det_irq_handler,
+			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			       "rk_hdmirx-5v", hdmirx_dev);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to request hdmirx-5v irq\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int hdmirx_register_cec(struct snps_hdmirx_dev *hdmirx_dev,
+			       struct platform_device *pdev)
+{
+	struct device *dev = hdmirx_dev->dev;
+	struct hdmirx_cec_data cec_data;
+	int irq;
+
+	irq = platform_get_irq_byname(pdev, "cec");
+	if (irq < 0) {
+		dev_err_probe(dev, irq, "failed to get cec irq\n");
+		return irq;
+	}
+
+	hdmirx_dev->cec_notifier = cec_notifier_conn_register(dev, NULL, NULL);
+	if (!hdmirx_dev->cec_notifier)
+		return -EINVAL;
+
+	cec_data.hdmirx = hdmirx_dev;
+	cec_data.dev = hdmirx_dev->dev;
+	cec_data.ops = &hdmirx_cec_ops;
+	cec_data.irq = irq;
+
+	hdmirx_dev->cec = snps_hdmirx_cec_register(&cec_data);
+	if (!hdmirx_dev->cec) {
+		cec_notifier_conn_unregister(hdmirx_dev->cec_notifier);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hdmirx_probe(struct platform_device *pdev)
+{
+	struct snps_hdmirx_dev *hdmirx_dev;
+	struct device *dev = &pdev->dev;
+	struct v4l2_ctrl_handler *hdl;
+	struct hdmirx_stream *stream;
+	struct v4l2_device *v4l2_dev;
+	int ret;
+
+	hdmirx_dev = devm_kzalloc(dev, sizeof(*hdmirx_dev), GFP_KERNEL);
+	if (!hdmirx_dev)
+		return -ENOMEM;
+
+	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	hdmirx_dev->dev = dev;
+	dev_set_drvdata(dev, hdmirx_dev);
+
+	ret = hdmirx_parse_dt(hdmirx_dev);
+	if (ret)
+		return ret;
+
+	ret = hdmirx_setup_irq(hdmirx_dev, pdev);
+	if (ret)
+		return ret;
+
+	hdmirx_dev->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hdmirx_dev->regs))
+		return dev_err_probe(dev, PTR_ERR(hdmirx_dev->regs),
+				     "failed to remap regs resource\n");
+
+	mutex_init(&hdmirx_dev->stream_lock);
+	mutex_init(&hdmirx_dev->work_lock);
+	spin_lock_init(&hdmirx_dev->rst_lock);
+
+	init_completion(&hdmirx_dev->cr_write_done);
+	init_completion(&hdmirx_dev->timer_base_lock);
+	init_completion(&hdmirx_dev->avi_pkt_rcv);
+
+	INIT_DELAYED_WORK(&hdmirx_dev->delayed_work_hotplug,
+			  hdmirx_delayed_work_hotplug);
+	INIT_DELAYED_WORK(&hdmirx_dev->delayed_work_res_change,
+			  hdmirx_delayed_work_res_change);
+
+	hdmirx_dev->cur_fmt_fourcc = V4L2_PIX_FMT_BGR24;
+	hdmirx_dev->timings = cea640x480;
+
+	hdmirx_enable(dev);
+	hdmirx_init(hdmirx_dev);
+
+	v4l2_dev = &hdmirx_dev->v4l2_dev;
+	strscpy(v4l2_dev->name, dev_name(dev), sizeof(v4l2_dev->name));
+
+	hdl = &hdmirx_dev->hdl;
+	v4l2_ctrl_handler_init(hdl, 3);
+
+	hdmirx_dev->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+							  V4L2_CID_DV_RX_POWER_PRESENT,
+							  0, 1, 0, 0);
+
+	hdmirx_dev->rgb_range = v4l2_ctrl_new_std_menu(hdl, NULL,
+						       V4L2_CID_DV_RX_RGB_RANGE,
+						       V4L2_DV_RGB_RANGE_FULL, 0,
+						       V4L2_DV_RGB_RANGE_AUTO);
+
+	hdmirx_dev->rgb_range->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	hdmirx_dev->content_type =
+		v4l2_ctrl_new_std_menu(hdl, NULL, V4L2_CID_DV_RX_IT_CONTENT_TYPE,
+				       V4L2_DV_IT_CONTENT_TYPE_NO_ITC, 0,
+				       V4L2_DV_IT_CONTENT_TYPE_NO_ITC);
+
+	if (hdl->error) {
+		dev_err(dev, "v4l2 ctrl handler init failed\n");
+		ret = hdl->error;
+		goto err_pm;
+	}
+	hdmirx_dev->v4l2_dev.ctrl_handler = hdl;
+
+	ret = v4l2_device_register(dev, &hdmirx_dev->v4l2_dev);
+	if (ret < 0) {
+		dev_err(dev, "register v4l2 device failed\n");
+		goto err_hdl;
+	}
+
+	stream = &hdmirx_dev->stream;
+	stream->hdmirx_dev = hdmirx_dev;
+	ret = hdmirx_register_stream_vdev(stream);
+	if (ret < 0) {
+		dev_err(dev, "register video device failed\n");
+		goto err_unreg_v4l2_dev;
+	}
+
+	ret = hdmirx_register_cec(hdmirx_dev, pdev);
+	if (ret)
+		goto err_unreg_video_dev;
+
+	hdmirx_load_default_edid(hdmirx_dev);
+
+	hdmirx_enable_irq(dev);
+
+	hdmirx_dev->debugfs_dir = debugfs_create_dir(hdmirx_dev->v4l2_dev.name,
+						     v4l2_debugfs_root());
+
+	hdmirx_dev->infoframes = v4l2_debugfs_if_alloc(hdmirx_dev->debugfs_dir,
+						       V4L2_DEBUGFS_IF_AVI, hdmirx_dev,
+						       hdmirx_debugfs_if_read);
+
+	return 0;
+
+err_unreg_video_dev:
+	video_unregister_device(&hdmirx_dev->stream.vdev);
+err_unreg_v4l2_dev:
+	v4l2_device_unregister(&hdmirx_dev->v4l2_dev);
+err_hdl:
+	v4l2_ctrl_handler_free(&hdmirx_dev->hdl);
+err_pm:
+	hdmirx_disable(dev);
+
+	return ret;
+}
+
+static void hdmirx_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct snps_hdmirx_dev *hdmirx_dev = dev_get_drvdata(dev);
+
+	v4l2_debugfs_if_free(hdmirx_dev->infoframes);
+	debugfs_remove_recursive(hdmirx_dev->debugfs_dir);
+
+	snps_hdmirx_cec_unregister(hdmirx_dev->cec);
+	cec_notifier_conn_unregister(hdmirx_dev->cec_notifier);
+
+	hdmirx_disable_irq(dev);
+
+	video_unregister_device(&hdmirx_dev->stream.vdev);
+	v4l2_ctrl_handler_free(&hdmirx_dev->hdl);
+	v4l2_device_unregister(&hdmirx_dev->v4l2_dev);
+
+	hdmirx_disable(dev);
+
+	reset_control_bulk_assert(HDMIRX_NUM_RST, hdmirx_dev->resets);
+
+	of_reserved_mem_device_release(dev);
+}
+
+static const struct of_device_id hdmirx_id[] = {
+	{ .compatible = "rockchip,rk3588-hdmirx-ctrler" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, hdmirx_id);
+
+static struct platform_driver hdmirx_driver = {
+	.probe = hdmirx_probe,
+	.remove = hdmirx_remove,
+	.driver = {
+		.name = "snps_hdmirx",
+		.of_match_table = hdmirx_id,
+		.pm = &snps_hdmirx_pm_ops,
+	}
+};
+module_platform_driver(hdmirx_driver);
+
+MODULE_DESCRIPTION("Synopsys HDMI Receiver Driver");
+MODULE_AUTHOR("Dingxian Wen <[email protected]>");
+MODULE_AUTHOR("Shreeya Patel <[email protected]>");
+MODULE_LICENSE("GPL");
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h new file +394 -0
new file mode 100644
index 000000000000..220ab99ca611
@@ -0,0 +1,394 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
+ *
+ * Author: Dingxian Wen <[email protected]>
+ */
+
+#ifndef DW_HDMIRX_H
+#define DW_HDMIRX_H
+
+#include <linux/bitops.h>
+
+#define UPDATE(x, h, l)		(((x) << (l)) & GENMASK((h), (l)))
+#define HIWORD_UPDATE(v, h, l)	(((v) << (l)) | (GENMASK((h), (l)) << 16))
+
+/* SYS_GRF */
+#define SYS_GRF_SOC_CON1			0x0304
+#define HDMIRXPHY_SRAM_EXT_LD_DONE		BIT(1)
+#define HDMIRXPHY_SRAM_BYPASS			BIT(0)
+#define SYS_GRF_SOC_STATUS1			0x0384
+#define HDMIRXPHY_SRAM_INIT_DONE		BIT(10)
+#define SYS_GRF_CHIP_ID				0x0600
+
+/* VO1_GRF */
+#define VO1_GRF_VO1_CON2			0x0008
+#define HDMIRX_SDAIN_MSK			BIT(2)
+#define HDMIRX_SCLIN_MSK			BIT(1)
+
+/* HDMIRX PHY */
+#define SUP_DIG_ANA_CREGS_SUP_ANA_NC			0x004f
+
+#define	LANE0_DIG_ASIC_RX_OVRD_OUT_0			0x100f
+#define	LANE1_DIG_ASIC_RX_OVRD_OUT_0			0x110f
+#define	LANE2_DIG_ASIC_RX_OVRD_OUT_0			0x120f
+#define	LANE3_DIG_ASIC_RX_OVRD_OUT_0			0x130f
+#define ASIC_ACK_OVRD_EN				BIT(1)
+#define ASIC_ACK					BIT(0)
+
+#define	LANE0_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_2		0x104a
+#define	LANE1_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_2		0x114a
+#define	LANE2_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_2		0x124a
+#define	LANE3_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_2		0x134a
+#define FREQ_TUNE_START_VAL_MASK			GENMASK(9, 0)
+#define FREQ_TUNE_START_VAL(x)				UPDATE(x, 9, 0)
+
+#define	HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_FSM_CONFIG	0x20c4
+#define	HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_ADAPT_REF_FOM	0x20c7
+#define HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_3_REG	0x20e9
+#define CDR_SETTING_BOUNDARY_3_DEFAULT			0x52da
+#define HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_4_REG	0x20ea
+#define CDR_SETTING_BOUNDARY_4_DEFAULT			0x43cd
+#define HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_5_REG	0x20eb
+#define CDR_SETTING_BOUNDARY_5_DEFAULT			0x35b3
+#define HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_6_REG	0x20fb
+#define	CDR_SETTING_BOUNDARY_6_DEFAULT			0x2799
+#define HDMIPCS_DIG_CTRL_PATH_MAIN_FSM_RATE_CALC_HDMI14_CDR_SETTING_7_REG	0x20fc
+#define CDR_SETTING_BOUNDARY_7_DEFAULT			0x1b65
+
+#define	RAWLANE0_DIG_PCS_XF_RX_OVRD_OUT			0x300e
+#define	RAWLANE1_DIG_PCS_XF_RX_OVRD_OUT			0x310e
+#define	RAWLANE2_DIG_PCS_XF_RX_OVRD_OUT			0x320e
+#define	RAWLANE3_DIG_PCS_XF_RX_OVRD_OUT			0x330e
+#define PCS_ACK_WRITE_SELECT				BIT(14)
+#define PCS_EN_CTL					BIT(1)
+#define PCS_ACK						BIT(0)
+
+#define	RAWLANE0_DIG_AON_FAST_FLAGS			0x305c
+#define	RAWLANE1_DIG_AON_FAST_FLAGS			0x315c
+#define	RAWLANE2_DIG_AON_FAST_FLAGS			0x325c
+#define	RAWLANE3_DIG_AON_FAST_FLAGS			0x335c
+
+/* HDMIRX Ctrler */
+#define GLOBAL_SWRESET_REQUEST			0x0020
+#define DATAPATH_SWRESETREQ			BIT(12)
+#define GLOBAL_SWENABLE				0x0024
+#define PHYCTRL_ENABLE				BIT(21)
+#define CEC_ENABLE				BIT(16)
+#define TMDS_ENABLE				BIT(13)
+#define DATAPATH_ENABLE				BIT(12)
+#define PKTFIFO_ENABLE				BIT(11)
+#define AVPUNIT_ENABLE				BIT(8)
+#define MAIN_ENABLE				BIT(0)
+#define GLOBAL_TIMER_REF_BASE			0x0028
+#define CORE_CONFIG				0x0050
+#define CMU_CONFIG0				0x0060
+#define TMDSQPCLK_STABLE_FREQ_MARGIN_MASK	GENMASK(30, 16)
+#define TMDSQPCLK_STABLE_FREQ_MARGIN(x)		UPDATE(x, 30, 16)
+#define AUDCLK_STABLE_FREQ_MARGIN_MASK		GENMASK(11, 9)
+#define AUDCLK_STABLE_FREQ_MARGIN(x)		UPDATE(x, 11, 9)
+#define CMU_STATUS				0x007c
+#define TMDSQPCLK_LOCKED_ST			BIT(4)
+#define CMU_TMDSQPCLK_FREQ			0x0084
+#define PHY_CONFIG				0x00c0
+#define LDO_AFE_PROG_MASK			GENMASK(24, 23)
+#define LDO_AFE_PROG(x)				UPDATE(x, 24, 23)
+#define LDO_PWRDN				BIT(21)
+#define TMDS_CLOCK_RATIO			BIT(16)
+#define RXDATA_WIDTH				BIT(15)
+#define REFFREQ_SEL_MASK			GENMASK(11, 9)
+#define REFFREQ_SEL(x)				UPDATE(x, 11, 9)
+#define HDMI_DISABLE				BIT(8)
+#define PHY_PDDQ				BIT(1)
+#define PHY_RESET				BIT(0)
+#define PHY_STATUS				0x00c8
+#define HDMI_DISABLE_ACK			BIT(1)
+#define PDDQ_ACK				BIT(0)
+#define PHYCREG_CONFIG0				0x00e0
+#define PHYCREG_CR_PARA_SELECTION_MODE_MASK	GENMASK(1, 0)
+#define PHYCREG_CR_PARA_SELECTION_MODE(x)	UPDATE(x, 1, 0)
+#define PHYCREG_CONFIG1				0x00e4
+#define PHYCREG_CONFIG2				0x00e8
+#define PHYCREG_CONFIG3				0x00ec
+#define PHYCREG_CONTROL				0x00f0
+#define PHYCREG_CR_PARA_WRITE_P			BIT(1)
+#define PHYCREG_CR_PARA_READ_P			BIT(0)
+#define PHYCREG_STATUS				0x00f4
+
+#define MAINUNIT_STATUS				0x0150
+#define TMDSVALID_STABLE_ST			BIT(1)
+#define DESCRAND_EN_CONTROL			0x0210
+#define SCRAMB_EN_SEL_QST_MASK			GENMASK(1, 0)
+#define SCRAMB_EN_SEL_QST(x)			UPDATE(x, 1, 0)
+#define DESCRAND_SYNC_CONTROL			0x0214
+#define RECOVER_UNSYNC_STREAM_QST		BIT(0)
+#define DESCRAND_SYNC_SEQ_CONFIG		0x022c
+#define DESCRAND_SYNC_SEQ_ERR_CNT_EN		BIT(0)
+#define DESCRAND_SYNC_SEQ_STATUS		0x0234
+#define DEFRAMER_CONFIG0			0x0270
+#define VS_CNT_THR_QST_MASK			GENMASK(27, 20)
+#define VS_CNT_THR_QST(x)			UPDATE(x, 27, 20)
+#define HS_POL_QST_MASK				GENMASK(19, 18)
+#define HS_POL_QST(x)				UPDATE(x, 19, 18)
+#define VS_POL_QST_MASK				GENMASK(17, 16)
+#define VS_POL_QST(x)				UPDATE(x, 17, 16)
+#define VS_REMAPFILTER_EN_QST			BIT(8)
+#define VS_FILTER_ORDER_QST_MASK		GENMASK(1, 0)
+#define VS_FILTER_ORDER_QST(x)			UPDATE(x, 1, 0)
+#define DEFRAMER_VSYNC_CNT_CLEAR		0x0278
+#define VSYNC_CNT_CLR_P				BIT(0)
+#define DEFRAMER_STATUS				0x027c
+#define OPMODE_STS_MASK				GENMASK(6, 4)
+#define I2C_SLAVE_CONFIG1			0x0164
+#define I2C_SDA_OUT_HOLD_VALUE_QST_MASK		GENMASK(15, 8)
+#define I2C_SDA_OUT_HOLD_VALUE_QST(x)		UPDATE(x, 15, 8)
+#define I2C_SDA_IN_HOLD_VALUE_QST_MASK		GENMASK(7, 0)
+#define I2C_SDA_IN_HOLD_VALUE_QST(x)		UPDATE(x, 7, 0)
+#define OPMODE_STS_MASK				GENMASK(6, 4)
+#define REPEATER_QST				BIT(28)
+#define FASTREAUTH_QST				BIT(27)
+#define FEATURES_1DOT1_QST			BIT(26)
+#define FASTI2C_QST				BIT(25)
+#define EESS_CTL_THR_QST_MASK			GENMASK(19, 16)
+#define EESS_CTL_THR_QST(x)			UPDATE(x, 19, 16)
+#define OESS_CTL3_THR_QST_MASK			GENMASK(11, 8)
+#define OESS_CTL3_THR_QST(x)			UPDATE(x, 11, 8)
+#define EESS_OESS_SEL_QST_MASK			GENMASK(5, 4)
+#define EESS_OESS_SEL_QST(x)			UPDATE(x, 5, 4)
+#define KEY_DECRYPT_EN_QST			BIT(0)
+#define KEY_DECRYPT_SEED_QST_MASK		GENMASK(15, 0)
+#define KEY_DECRYPT_SEED_QST(x)			UPDATE(x, 15, 0)
+#define HDCP_INT_CLEAR				0x50d8
+#define HDCP_1_INT_CLEAR			0x50e8
+#define HDCP2_CONFIG				0x02f0
+#define HDCP2_SWITCH_OVR_VALUE			BIT(2)
+#define HDCP2_SWITCH_OVR_EN			BIT(1)
+
+#define VIDEO_CONFIG2				0x042c
+#define VPROC_VSYNC_POL_OVR_VALUE		BIT(19)
+#define VPROC_VSYNC_POL_OVR_EN			BIT(18)
+#define VPROC_HSYNC_POL_OVR_VALUE		BIT(17)
+#define VPROC_HSYNC_POL_OVR_EN			BIT(16)
+#define VPROC_FMT_OVR_VALUE_MASK		GENMASK(6, 4)
+#define VPROC_FMT_OVR_VALUE(x)			UPDATE(x, 6, 4)
+#define VPROC_FMT_OVR_EN			BIT(0)
+
+#define AFIFO_FILL_RESTART			BIT(0)
+#define AFIFO_INIT_P				BIT(0)
+#define AFIFO_THR_LOW_QST_MASK			GENMASK(25, 16)
+#define AFIFO_THR_LOW_QST(x)			UPDATE(x, 25, 16)
+#define AFIFO_THR_HIGH_QST_MASK			GENMASK(9, 0)
+#define AFIFO_THR_HIGH_QST(x)			UPDATE(x, 9, 0)
+#define AFIFO_THR_MUTE_LOW_QST_MASK		GENMASK(25, 16)
+#define AFIFO_THR_MUTE_LOW_QST(x)		UPDATE(x, 25, 16)
+#define AFIFO_THR_MUTE_HIGH_QST_MASK		GENMASK(9, 0)
+#define AFIFO_THR_MUTE_HIGH_QST(x)		UPDATE(x, 9, 0)
+
+#define AFIFO_UNDERFLOW_ST			BIT(25)
+#define AFIFO_OVERFLOW_ST			BIT(24)
+
+#define SPEAKER_ALLOC_OVR_EN			BIT(16)
+#define I2S_BPCUV_EN				BIT(4)
+#define SPDIF_EN				BIT(2)
+#define I2S_EN					BIT(1)
+#define AFIFO_THR_PASS_DEMUTEMASK_N		BIT(24)
+#define AVMUTE_DEMUTEMASK_N			BIT(16)
+#define AFIFO_THR_MUTE_LOW_MUTEMASK_N		BIT(9)
+#define AFIFO_THR_MUTE_HIGH_MUTEMASK_N		BIT(8)
+#define AVMUTE_MUTEMASK_N			BIT(0)
+#define SCDC_CONFIG				0x0580
+#define HPDLOW					BIT(1)
+#define POWERPROVIDED				BIT(0)
+#define SCDC_REGBANK_STATUS1			0x058c
+#define SCDC_TMDSBITCLKRATIO			BIT(1)
+#define SCDC_REGBANK_STATUS3			0x0594
+#define SCDC_REGBANK_CONFIG0			0x05c0
+#define SCDC_SINKVERSION_QST_MASK		GENMASK(7, 0)
+#define SCDC_SINKVERSION_QST(x)			UPDATE(x, 7, 0)
+#define AGEN_LAYOUT				BIT(4)
+#define AGEN_SPEAKER_ALLOC			GENMASK(15, 8)
+
+#define CED_CONFIG				0x0760
+#define CED_VIDDATACHECKEN_QST			BIT(27)
+#define CED_DATAISCHECKEN_QST			BIT(26)
+#define CED_GBCHECKEN_QST			BIT(25)
+#define CED_CTRLCHECKEN_QST			BIT(24)
+#define CED_CHLOCKMAXER_QST_MASK		GENMASK(14, 0)
+#define CED_CHLOCKMAXER_QST(x)			UPDATE(x, 14, 0)
+#define CED_DYN_CONFIG				0x0768
+#define CED_DYN_CONTROL				0x076c
+#define PKTEX_BCH_ERRFILT_CONFIG		0x07c4
+#define PKTEX_CHKSUM_ERRFILT_CONFIG		0x07c8
+
+#define PKTDEC_ACR_PH2_1			0x1100
+#define PKTDEC_ACR_PB3_0			0x1104
+#define PKTDEC_ACR_PB7_4			0x1108
+#define PKTDEC_AVIIF_PH2_1			0x1200
+#define PKTDEC_AVIIF_PB3_0			0x1204
+#define PKTDEC_AVIIF_PB7_4			0x1208
+#define VIC_VAL_MASK				GENMASK(6, 0)
+#define PKTDEC_AVIIF_PB11_8			0x120c
+#define PKTDEC_AVIIF_PB15_12			0x1210
+#define PKTDEC_AVIIF_PB19_16			0x1214
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c new file +284 -0
new file mode 100644
index 000000000000..b820c04e5012

Lines of this file are not shown. View the raw message.

drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h new file +44 -0
new file mode 100644
index 000000000000..c55c403cdb9f

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Regards,

Hans

Part of the diff is not shown here. View the raw message.

author maintainer
#6 lore raw

Re: [PATCH v7 4/6] media: platform: synopsys: Add support for HDMI input driver

Hi Hans,

Thank you very much for the review!

Quoted 9 lines · Hans Verkuil

Hi Dmitry,

More review comments. Some are trivial, but the real problem is that the 5V/HPD handling is really confusing and, from what I can tell, incorrect in places.

I suspect that there are some misunderstandings on how this is supposed to work. I've tried to explain it in my comments, but feel free to contact me if anything is still unclear.

...

Quoted 8 lines
Quoted 1 line

+#define EDID_NUM_BLOCKS_MAX 2

Is this indeed the maximum number of supported EDID blocks? These days 4 EDID blocks is typically the maximum. If the hardware supports it, then I recommend implementing support for 4 EDID blocks.

If it really only supports 2 blocks, then add a comment stating that this is a HW limitation.

Good catch. Hardware supports 4 EDID blocks, will change in v8.

...

Quoted 8 lines

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 224

Quoted 6 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +6 -0
+static int hdmirx_subscribe_event(struct v4l2_fh *fh,
+				  const struct v4l2_event_subscription *sub)
+{
+	switch (sub->type) {
+	case V4L2_EVENT_SOURCE_CHANGE:
+		if (fh->vdev->vfl_dir == VFL_DIR_RX)

This is weird, the direction is always RX, so can't you just drop this test?

Suppose this code was copied from another driver, will drop.

...

Quoted 65 lines
Quoted 36 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +36 -0
+static int hdmirx_set_edid(struct file *file, void *fh, struct v4l2_edid *edid)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	u16 phys_addr;
+	int ret = 0;
+
+	if (edid->pad)
+		return -EINVAL;
+
+	if (edid->start_block)
+		return -EINVAL;
+
+	if (edid->blocks > EDID_NUM_BLOCKS_MAX) {
+		edid->blocks = EDID_NUM_BLOCKS_MAX;
+		return -E2BIG;
+	}
+
+	hdmirx_disable_irq(hdmirx_dev->dev);
+
+	if (!edid->blocks) {
+		cec_phys_addr_invalidate(hdmirx_dev->cec->adap);
+		hdmirx_dev->edid_blocks_written = 0;
+
+		hdmirx_dev->hpd_pull_low = true;
+
+		if (tx_5v_power_present(hdmirx_dev))
+			hdmirx_plugout(hdmirx_dev);
+		else
+			hdmirx_hpd_ctrl(hdmirx_dev, false);
+	} else {
+		phys_addr = cec_get_edid_phys_addr(edid->edid,
+						   edid->blocks * 128, NULL);
+		ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
+		if (ret)
+			goto out;

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 713

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+
+		if (tx_5v_power_present(hdmirx_dev))
+			hdmirx_plugout(hdmirx_dev);
+
+		hdmirx_dev->hpd_pull_low = false;
+		hdmirx_hpd_ctrl(hdmirx_dev, false);
+		hdmirx_write_edid(hdmirx_dev, edid);
+	}
+out:
+	hdmirx_enable_irq(hdmirx_dev->dev);

The way the HPD is handled is really confusing in the code. I had to dig through the driver code to discover that the HPD is enabled via hdmirx_enable_irq(). But normally interrupts have nothing to do with the HPD.

The HPD is really only controlled by whether there is an EDID or not, and optionally whether 5V is high or not. The only reason for pulling the HPD low if 5V is low is to save a bit of power: if nothing is connected, then there is no need to pull the HPD high, after all, nobody is listening to it.

But this is typically entirely separate from interrupts.

The 5V decides whether there is a video source or not, so if it goes low, then you stop streaming. The HPD tells the video source if there is an EDID or not. But that is independent of video streaming. Updating the EDID while the source is sending video shouldn't interrupt video capture. Most likely the source will detect an EDID change, parse the new EDID and then it might decide to stop streaming and reconfigure, or just continue streaming.

Quoted 5 lines

The code feels like you are trying to be smart, when it is really just a fairly dumb mechanism.

I think this should be rewritten, unless there are some odd hardware constraints. In which case that should be documented.

Thanks a lot for the clarification! The HPD logic was borrowed from the downstream driver, will try to change it for v8. I'm not aware about hardware constraints and TRM suggests that driving HPD seprately from 5v should work fine, will see how it will work in practice.

...

Quoted 16 lines

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 765

Quoted 13 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +13 -0
+static int hdmirx_g_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *parm)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_fract fps;
+
+	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return -EINVAL;
+
+	fps = v4l2_calc_timeperframe(&hdmirx_dev->timings);
+	parm->parm.capture.timeperframe.numerator = fps.numerator;
+	parm->parm.capture.timeperframe.denominator = fps.denominator;

You can just write:

Quoted 1 line
	parm->parm.capture.timeperframe = v4l2_calc_timeperframe(&hdmirx_dev->timings);

Ack

...

Quoted 11 lines

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 2164

Quoted 6 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +6 -0
+static void hdmirx_plugin(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_submodule_init(hdmirx_dev);
+	hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, POWERPROVIDED,
+			   POWERPROVIDED);
+	hdmirx_hpd_ctrl(hdmirx_dev, true);

Just because the 5V appeared, it doesn't mean that the HPD should go high. That depends on whether there is an EDID or not.

As I said above, the whole 5V/HPD handling seems confused in this driver.

In v6 I added 'hpd_pull_low' variable that force-disables HPD if there is no EDID. Hence, this hdmirx_hpd_ctrl() call doesn't enable HPD without EDID. I'll remove this call in v8 if driving HPD independently from 5v status will work fine.

static void hdmirx_hpd_ctrl(struct snps_hdmirx_dev *hdmirx_dev, bool en) {
...

	if (hdmirx_dev->hpd_pull_low && en)
		return;
        ^^^^

...

Quoted 25 lines
Quoted 12 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +12 -0
+static void hdmirx_delayed_work_res_change(struct work_struct *work)
+{
+	struct snps_hdmirx_dev *hdmirx_dev;
+	bool plugin;
+
+	hdmirx_dev = container_of(work, struct snps_hdmirx_dev,
+				  delayed_work_res_change.work);
+
+	mutex_lock(&hdmirx_dev->work_lock);
+	plugin = tx_5v_power_present(hdmirx_dev);
+	v4l2_dbg(1, debug, &hdmirx_dev->v4l2_dev, "%s: plugin:%d\n",
+		 __func__, plugin);

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 2212

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+	if (plugin) {
+		hdmirx_interrupts_setup(hdmirx_dev, false);
+		hdmirx_submodule_init(hdmirx_dev);
+		hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, POWERPROVIDED,
+				   POWERPROVIDED);
+		hdmirx_hpd_ctrl(hdmirx_dev, true);
+		hdmirx_phy_config(hdmirx_dev);
+
+		if (hdmirx_wait_signal_lock(hdmirx_dev)) {
+			hdmirx_plugout(hdmirx_dev);

plugout() pulls the HPD low, but why? That has nothing to do with the signal lock.

Quoted 3 lines

You need to take a good look at the 5V/HPD handling, this isn't right.

Feel free to ask questions if you are not clear on how it should behave.

Again thanks a lot for the review, very appreciate! Will contact you if will become necessary.

Signature · 7 lines
Best regards,
Dmitry

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
#7 lore raw

Re: [PATCH v7 4/6] media: platform: synopsys: Add support for HDMI input driver

Hi Dmitry,

Quoted 17 lines · Dmitry Osipenko

Hi Hans,

Thank you very much for the review!

Quoted 9 lines · Hans Verkuil

Hi Dmitry,

More review comments. Some are trivial, but the real problem is that the 5V/HPD handling is really confusing and, from what I can tell, incorrect in places.

I suspect that there are some misunderstandings on how this is supposed to work. I've tried to explain it in my comments, but feel free to contact me if anything is still unclear.

...

Quoted 2 lines
Quoted 1 line

+#define EDID_NUM_BLOCKS_MAX 2

Quoted 8 lines
Quoted 6 lines

Is this indeed the maximum number of supported EDID blocks? These days 4 EDID blocks is typically the maximum. If the hardware supports it, then I recommend implementing support for 4 EDID blocks.

If it really only supports 2 blocks, then add a comment stating that this is a HW limitation.

Good catch. Hardware supports 4 EDID blocks, will change in v8.

Ah, good. Make sure you test this, both writing 4 blocks to it and read it from a transmitter. With v4l2-ctl --set-edid type=displayport-with-cta861 sets 3 blocks, and type=hdmi-4k-600mhz-with-displayid sets 4 blocks. So test with both variants.

Quoted 156 lines

...

Quoted 8 lines

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 224

Quoted 6 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +6 -0
+static int hdmirx_subscribe_event(struct v4l2_fh *fh,
+				  const struct v4l2_event_subscription *sub)
+{
+	switch (sub->type) {
+	case V4L2_EVENT_SOURCE_CHANGE:
+		if (fh->vdev->vfl_dir == VFL_DIR_RX)

This is weird, the direction is always RX, so can't you just drop this test?

Suppose this code was copied from another driver, will drop.

...

Quoted 65 lines
Quoted 36 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +36 -0
+static int hdmirx_set_edid(struct file *file, void *fh, struct v4l2_edid *edid)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	u16 phys_addr;
+	int ret = 0;
+
+	if (edid->pad)
+		return -EINVAL;
+
+	if (edid->start_block)
+		return -EINVAL;
+
+	if (edid->blocks > EDID_NUM_BLOCKS_MAX) {
+		edid->blocks = EDID_NUM_BLOCKS_MAX;
+		return -E2BIG;
+	}
+
+	hdmirx_disable_irq(hdmirx_dev->dev);
+
+	if (!edid->blocks) {
+		cec_phys_addr_invalidate(hdmirx_dev->cec->adap);
+		hdmirx_dev->edid_blocks_written = 0;
+
+		hdmirx_dev->hpd_pull_low = true;
+
+		if (tx_5v_power_present(hdmirx_dev))
+			hdmirx_plugout(hdmirx_dev);
+		else
+			hdmirx_hpd_ctrl(hdmirx_dev, false);
+	} else {
+		phys_addr = cec_get_edid_phys_addr(edid->edid,
+						   edid->blocks * 128, NULL);
+		ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
+		if (ret)
+			goto out;

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 713

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+
+		if (tx_5v_power_present(hdmirx_dev))
+			hdmirx_plugout(hdmirx_dev);
+
+		hdmirx_dev->hpd_pull_low = false;
+		hdmirx_hpd_ctrl(hdmirx_dev, false);
+		hdmirx_write_edid(hdmirx_dev, edid);
+	}
+out:
+	hdmirx_enable_irq(hdmirx_dev->dev);

The way the HPD is handled is really confusing in the code. I had to dig through the driver code to discover that the HPD is enabled via hdmirx_enable_irq(). But normally interrupts have nothing to do with the HPD.

The HPD is really only controlled by whether there is an EDID or not, and optionally whether 5V is high or not. The only reason for pulling the HPD low if 5V is low is to save a bit of power: if nothing is connected, then there is no need to pull the HPD high, after all, nobody is listening to it.

But this is typically entirely separate from interrupts.

The 5V decides whether there is a video source or not, so if it goes low, then you stop streaming. The HPD tells the video source if there is an EDID or not. But that is independent of video streaming. Updating the EDID while the source is sending video shouldn't interrupt video capture. Most likely the source will detect an EDID change, parse the new EDID and then it might decide to stop streaming and reconfigure, or just continue streaming.

Quoted 5 lines

The code feels like you are trying to be smart, when it is really just a fairly dumb mechanism.

I think this should be rewritten, unless there are some odd hardware constraints. In which case that should be documented.

Thanks a lot for the clarification! The HPD logic was borrowed from the downstream driver, will try to change it for v8. I'm not aware about hardware constraints and TRM suggests that driving HPD seprately from 5v should work fine, will see how it will work in practice.

...

Quoted 16 lines

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 765

Quoted 13 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +13 -0
+static int hdmirx_g_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *parm)
+{
+	struct hdmirx_stream *stream = video_drvdata(file);
+	struct snps_hdmirx_dev *hdmirx_dev = stream->hdmirx_dev;
+	struct v4l2_fract fps;
+
+	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return -EINVAL;
+
+	fps = v4l2_calc_timeperframe(&hdmirx_dev->timings);
+	parm->parm.capture.timeperframe.numerator = fps.numerator;
+	parm->parm.capture.timeperframe.denominator = fps.denominator;

You can just write:

Quoted 1 line
	parm->parm.capture.timeperframe = v4l2_calc_timeperframe(&hdmirx_dev->timings);

Ack

...

Quoted 11 lines

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 2164

Quoted 6 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +6 -0
+static void hdmirx_plugin(struct snps_hdmirx_dev *hdmirx_dev)
+{
+	hdmirx_submodule_init(hdmirx_dev);
+	hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, POWERPROVIDED,
+			   POWERPROVIDED);
+	hdmirx_hpd_ctrl(hdmirx_dev, true);

Just because the 5V appeared, it doesn't mean that the HPD should go high. That depends on whether there is an EDID or not.

As I said above, the whole 5V/HPD handling seems confused in this driver.

In v6 I added 'hpd_pull_low' variable that force-disables HPD if there is no EDID. Hence, this hdmirx_hpd_ctrl() call doesn't enable HPD without EDID. I'll remove this call in v8 if driving HPD independently from 5v status will work fine.

static void hdmirx_hpd_ctrl(struct snps_hdmirx_dev *hdmirx_dev, bool en) {
...

	if (hdmirx_dev->hpd_pull_low && en)
		return;
        ^^^^

...

Quoted 25 lines
Quoted 12 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +12 -0
+static void hdmirx_delayed_work_res_change(struct work_struct *work)
+{
+	struct snps_hdmirx_dev *hdmirx_dev;
+	bool plugin;
+
+	hdmirx_dev = container_of(work, struct snps_hdmirx_dev,
+				  delayed_work_res_change.work);
+
+	mutex_lock(&hdmirx_dev->work_lock);
+	plugin = tx_5v_power_present(hdmirx_dev);
+	v4l2_dbg(1, debug, &hdmirx_dev->v4l2_dev, "%s: plugin:%d\n",
+		 __func__, plugin);

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 2212

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+	if (plugin) {
+		hdmirx_interrupts_setup(hdmirx_dev, false);
+		hdmirx_submodule_init(hdmirx_dev);
+		hdmirx_update_bits(hdmirx_dev, SCDC_CONFIG, POWERPROVIDED,
+				   POWERPROVIDED);
+		hdmirx_hpd_ctrl(hdmirx_dev, true);
+		hdmirx_phy_config(hdmirx_dev);
+
+		if (hdmirx_wait_signal_lock(hdmirx_dev)) {
+			hdmirx_plugout(hdmirx_dev);

plugout() pulls the HPD low, but why? That has nothing to do with the signal lock.

Quoted 6 lines
Quoted 3 lines

You need to take a good look at the 5V/HPD handling, this isn't right.

Feel free to ask questions if you are not clear on how it should behave.

Again thanks a lot for the review, very appreciate! Will contact you if will become necessary.

Regards,

Hans

author maintainer
#8 lore raw

Re: [PATCH v7 4/6] media: platform: synopsys: Add support for HDMI input driver

Quoted 5 lines · Hans Verkuil
Quoted 1 line

Good catch. Hardware supports 4 EDID blocks, will change in v8.

Ah, good. Make sure you test this, both writing 4 blocks to it and read it from a transmitter. With v4l2-ctl --set-edid type=displayport-with-cta861 sets 3 blocks, and type=hdmi-4k-600mhz-with-displayid sets 4 blocks. So test with both variants.

Tested it yesterday with reading 4 blocks from transmitter, worked fine.

The HPD change also works well with the preliminary testing.

Signature · 2 lines
Best regards,
Dmitry
#9 lore raw

Re: [PATCH v7 4/6] media: platform: synopsys: Add support for HDMI input driver

In reply to Dmitry Osipenko

…

Quoted 2 lines

+++ b/drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c

(quoted diff) +0 -0
@@ -0,0 +1,2718 @@

…

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 198

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+static u32 hdmirx_readl(struct snps_hdmirx_dev *hdmirx_dev, int reg)
+{
+	u32 val;
+
+	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
+
+	val = readl(hdmirx_dev->regs + reg);
+
+	return val;
+}

May such a function implementation be simplified?

{
	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
	return readl(hdmirx_dev->regs + reg);
}

…

Quoted 3 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +3 -0
+static int hdmirx_get_detected_timings(struct snps_hdmirx_dev *hdmirx_dev,
+				       struct v4l2_dv_timings *timings)
+{

…

Quoted 3 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +3 -0
+	mutex_lock(&hdmirx_dev->work_lock);
+retry:
+	memset(timings, 0, sizeof(struct v4l2_dv_timings));

…

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 462

Quoted 4 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +4 -0
+	mutex_unlock(&hdmirx_dev->work_lock);
+
+	return ret;
+}

…

Would you become interested to apply a statement like “guard(mutex)(&hdmirx_dev->work_lock);”?
https://elixir.bootlin.com/linux/v6.14-rc3/source/include/linux/mutex.h#L201

Regards,
Markus

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

author maintainer
#10 lore raw

Re: [PATCH v7 4/6] media: platform: synopsys: Add support for HDMI input driver

Quoted 17 lines · Markus Elfring

…

Quoted 2 lines

+++ b/drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c

(quoted diff) +0 -0
@@ -0,0 +1,2718 @@

…

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 198

Quoted 10 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +10 -0
+static u32 hdmirx_readl(struct snps_hdmirx_dev *hdmirx_dev, int reg)
+{
+	u32 val;
+
+	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
+
+	val = readl(hdmirx_dev->regs + reg);
+
+	return val;
+}

May such a function implementation be simplified?

Quoted 4 lines
{
	guard(spinlock_irqsave)(&hdmirx_dev->rst_lock);
	return readl(hdmirx_dev->regs + reg);
}

That will work, thanks.

Quoted 9 lines

…

Quoted 3 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +3 -0
+static int hdmirx_get_detected_timings(struct snps_hdmirx_dev *hdmirx_dev,
+				       struct v4l2_dv_timings *timings)
+{

…

Quoted 3 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +3 -0
+	mutex_lock(&hdmirx_dev->work_lock);
+retry:
+	memset(timings, 0, sizeof(struct v4l2_dv_timings));

…

Quoted 8 lines

drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c line 462

Quoted 4 lines
drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c new file +4 -0
+	mutex_unlock(&hdmirx_dev->work_lock);
+
+	return ret;
+}

…

Would you become interested to apply a statement like “guard(mutex)(&hdmirx_dev->work_lock);”?
https://elixir.bootlin.com/linux/v6.14-rc3/source/include/linux/mutex.h#L201

That will make code less consistent and less intuitive to me. Anyways, thanks for the suggestion.

Signature · 7 lines
Best regards,
Dmitry

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
author maintainer
#11 lore raw

PATCH v7 5/6 arm64: defconfig: Enable Synopsys HDMI receiver

In reply to Dmitry Osipenko

From: Sebastian Reichel <[email protected]>

The Rockchip RK3588 has a built-in HDMI receiver block from Synopsys. Let's enable the driver for it.

---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index cb7da4415599..6ed1ad3c0055 100644
@@ -859,6 +859,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
 CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_SYNOPSYS_HDMIRX=m
 CONFIG_VIDEO_TI_J721E_CSI2RX=m
 CONFIG_VIDEO_HANTRO=m
 CONFIG_VIDEO_IMX219=m
Signature · 1 line
2.48.1
author maintainer
#12 lore raw

PATCH v7 6/6 arm64: dts: rockchip: Enable HDMI receiver on rock-5b

In reply to Dmitry Osipenko

From: Sebastian Reichel <[email protected]>

The Rock 5B has a Micro HDMI port, which can be used for receiving HDMI data. This enables support for it.

---
 .../arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +18 -0
index d597112f1d5b..377824e69e20 100644
@@ -220,6 +220,18 @@ hdmi0_out_con: endpoint {
 	};
 };
 
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	status = "okay";
+	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+	memory-region = <&hdmi_receiver_cma>;
+};
+
 &hdptxphy_hdmi0 {
 	status = "okay";
 };
@@ -377,6 +389,12 @@ &pcie3x4 {
 };
 
 &pinctrl {
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	hym8563 {
 		hym8563_int: hym8563-int {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
Signature · 1 line
2.48.1