FAILED: patch "[PATCH] usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters" failed to apply to 5.4-stable tree

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 659f5d55feb75782bd46cf130da3c1f240afe9ba
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025021852-blemish-humility-00ca@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 659f5d55feb75782bd46cf130da3c1f240afe9ba Mon Sep 17 00:00:00 2001
From: Jos Wang <[email protected]>
Date: Thu, 13 Feb 2025 21:49:21 +0800
Subject: [PATCH] usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters
ERROR_RECOVERY
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is used by the Policy Engine in Dual-Role Power device that is currently acting as a Sink to timeout on a PS_RDY Message during a Power Role Swap sequence. This condition leads to a Hard Reset for USB Type-A and Type-B Plugs and Error Recovery for Type-C plugs and return to USB Default Operation.

Therefore, after PSSourceOffTimer timeout, the tcpm state machine should switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also solve the test items in the USB power delivery compliance test:
TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout

[1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip

index 47be450d2be3..6bf1a22c785a 100644
@@ -5591,8 +5591,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB,
 						       port->pps_data.active, 0);
 		tcpm_set_charge(port, false);
-		tcpm_set_state(port, hard_reset_state(port),
-			       port->timings.ps_src_off_time);
+		tcpm_set_state(port, ERROR_RECOVERY, port->timings.ps_src_off_time);
 		break;
 	case PR_SWAP_SNK_SRC_SOURCE_ON:
 		tcpm_enable_auto_vbus_discharge(port, true);