Skip to contentSkip to conversation

ubifs-utils: ubifs.h: Include <fcntl.h>

PATCH In review Fabio Estevam 5 participants 8 messages Feb 19, 2025 – Jun 2, 2025 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/4 ubifs-utils: ubifs.h: Include <fcntl.h>

Include the <fcntl.h> header file to fix the following error when building with musl:

| In file included from ../git/ubifs-utils/common/compr.c:42:
| ../git/ubifs-utils/libubifs/ubifs.h:313:9: error: unknown type name 'loff_t'; did you mean 'off_t'?
|   313 |         loff_t ui_size;
|       |         ^~~~~~
|       |         off_t
| ../git/ubifs-utils/libubifs/ubifs.h:1341:9: error: unknown type name 'loff_t'; did you mean 'off_t'?
|  1341 |         loff_t i_size;
|       |         ^~~~~~
|       |         off_t
| ../git/ubifs-utils/libubifs/ubifs.h:1342:9: error: unknown type name 'loff_t'; did you mean 'off_t'?
|  1342 |         loff_t d_size;
|       |         ^~~~~~
|       |         off_t
| ../git/ubifs-utils/libubifs/ubifs.h:1899:44: error: unknown type name 'loff_t'; did you mean 'off_t'?
|  1899 |                              int deletion, loff_t new_size);
|       |                                            ^~~~~~
|       |                                            off_t
| make: *** [Makefile:4878: ubifs-utils/common/mkfs_ubifs-compr.o] Error 1

---
Changes since v3:
- Removed Upstream-Status tag.

 ubifs-utils/libubifs/ubifs.h | 1 +
 1 file changed, 1 insertion(+)
ubifs-utils/libubifs/ubifs.h +1 -0
index 0908a2289208..1c7bc7bd0c80 100644
@@ -11,6 +11,7 @@
 #ifndef __UBIFS_H__
 #define __UBIFS_H__
 
+#include <fcntl.h>
 #include <string.h>
 
 #include "linux_types.h"
Signature · 6 lines
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
#1 lore raw

PATCH v4 2/4 ubifs-utils: journal: Include <sys/stat.h>

Include the <sys/stat.h> header file to fix the following error when building with musl:

| ../git/ubifs-utils/libubifs/journal.c: In function 'ubifs_get_dent_type':
| ../git/ubifs-utils/libubifs/journal.c:414:24: error: 'S_IFMT' undeclared (first use in this function)
|   414 |         switch (mode & S_IFMT) {
|       |                        ^~~~~~
| ../git/ubifs-utils/libubifs/journal.c:414:24: note: each undeclared identifier is reported only once for each function it appears in
| ../git/ubifs-utils/libubifs/journal.c:415:14: error: 'S_IFREG' undeclared (first use in this function)
|   415 |         case S_IFREG:

---
Changes since v3:
- Removed Upstream-Status tag.

 ubifs-utils/libubifs/journal.c | 1 +
 1 file changed, 1 insertion(+)
ubifs-utils/libubifs/journal.c +1 -0
index e78ea14f3e69..45d82fd54bdb 100644
@@ -46,6 +46,7 @@
  * all the nodes.
  */
 
+#include <sys/stat.h>
 #include "bitops.h"
 #include "kmem.h"
 #include "ubifs.h"
Signature · 6 lines
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
#2 lore raw

PATCH v4 3/4 configure.ac: Add a check for execinfo and backtrace

In reply to Fabio Estevam

musl relies on an external execinfo library to provide backtrace functionality. If musl cannot link to libexecinfo, the following link error happens:

| /work/festevam/oe/poky/build/tmp/work/core2-64-poky-linux-musl/mtd-utils/2.3.0/recipe-sysroot-native/usr/bin/x86_64-poky-linux-musl/../../libexec/x86_64-poky-linux-musl/gcc/x86_64-poky-linux-musl/14.2.0/ld: ubifs-utils/libubifs/mkfs_ubifs-io.o: in function `dump_stack':
| /usr/src/debug/mtd-utils/2.3.0/ubifs-utils/common/defs.h:71:(.text+0x25): undefined reference to `backtrace'
....
| collect2: error: ld returned 1 exit status
| make: *** [Makefile:2959: mkfs.ubifs] Error 1

Fix the problem by checking for backtrace support in libc first and if not found, then check for backtrace support in the external libexecinfo.

---
Change since v3:
- None.

 configure.ac | 11 +++++++++++
 1 file changed, 11 insertions(+)
configure.ac +11 -0
index 2a79ba820fc0..296901e61760 100644
@@ -238,6 +238,17 @@ if test "x$need_cmocka" = "xyes"; then
 	PKG_CHECK_MODULES(CMOCKA, [cmocka], [], [cmocka_missing="yes"])
 fi
 
+AC_CHECK_FUNC([backtrace], [have_backtrace=yes], [have_backtrace=no])
+
+if test "x$have_backtrace" = "xno"; then
+    AC_CHECK_LIB([execinfo], [backtrace],
+        [LIBS="$LIBS -lexecinfo"
+         AC_DEFINE([HAVE_BACKTRACE], [1], [backtrace is available via libexecinfo])],
+        [AC_MSG_WARN([backtrace support not found])])
+else
+    AC_DEFINE([HAVE_BACKTRACE], [1], [backtrace is available via libc])
+fi
+
 AC_CHECK_HEADERS([execinfo.h])
 
 ##### produce summary on dependencies #####
Signature · 6 lines
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
#3 lore raw

Re: [PATCH v4 mtd-utils 3/4] configure.ac: Add a check for execinfo and backtrace

Quoted 7 lines · Fabio Estevam

musl relies on an external execinfo library to provide backtrace functionality. If musl cannot link to libexecinfo, the following link error happens:

Fix the problem by checking for backtrace support in libc first and if not found, then check for backtrace support in the external libexecinfo.

If this is the right solution, it’s not complete.

mtd-utils already checks for the presence of execinfo.h and uses that when creating lib/libmissing.a, which if execinfo.h isn’t present will contain a stub backtrace() implementation that simply returns 0. The test suite already uses this so it can build on systems without musl, but presumably nobody tested mtd-utils on musl after "ubifs-utils: Add implementations for linux kernel printing functions” landed, which added more users of backtrace().

I think either mtd-utils should hard-depend on _something_ providing backtrace(), be it the libc or a drop-in library, or it should use backtrace() if present and gracefully fallback otherwise (as it’s a convenience feature). Not both, which is what this patch achieves.

I’ll send an alternative patch in a moment which uses libmissing.a instead of relying on an external libexecinfo.

Note that the rest of the series is good, this is the only change I have comments on.

Ross
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

#4 lore raw

Re: [PATCH v4 mtd-utils 3/4] configure.ac: Add a check for execinfo and backtrace

Quoted 10 lines · Ross Burton
Quoted 7 lines · Fabio Estevam

musl relies on an external execinfo library to provide backtrace functionality. If musl cannot link to libexecinfo, the following link error happens:

Fix the problem by checking for backtrace support in libc first and if not found, then check for backtrace support in the external libexecinfo.

Quoted 8 lines

If this is the right solution, it’s not complete.

mtd-utils already checks for the presence of execinfo.h and uses that when creating lib/libmissing.a, which if execinfo.h isn’t present will contain a stub backtrace() implementation that simply returns 0. The test suite already uses this so it can build on systems without musl, but presumably nobody tested mtd-utils on musl after "ubifs-utils: Add implementations for linux kernel printing functions” landed, which added more users of backtrace().

I think either mtd-utils should hard-depend on _something_ providing backtrace(), be it the libc or a drop-in library, or it should use backtrace() if present and gracefully fallback otherwise (as it’s a convenience feature). Not both, which is what this patch achieves.

I’ll send an alternative patch in a moment which uses libmissing.a instead of relying on an external libexecinfo.

I think looking for libexecinfo is perhaps fine, its that when backtrace is not found in libc and in libexecinfo, it should still work by falling back to stub.

Quoted 4 lines

Note that the rest of the series is good, this is the only change I have comments on.

Ross
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

#5 lore raw

Re: [PATCH v4 mtd-utils 3/4] configure.ac: Add a check for execinfo and backtrace

Quoted 11 lines · Khem Raj
Quoted 10 lines · Ross Burton
Quoted 7 lines · Fabio Estevam

musl relies on an external execinfo library to provide backtrace functionality. If musl cannot link to libexecinfo, the following link error happens:

Fix the problem by checking for backtrace support in libc first and if not found, then check for backtrace support in the external libexecinfo.

Quoted 6 lines
Quoted 6 lines

If this is the right solution, it’s not complete.

mtd-utils already checks for the presence of execinfo.h and uses that when creating lib/libmissing.a, which if execinfo.h isn’t present will contain a stub backtrace() implementation that simply returns 0. The test suite already uses this so it can build on systems without musl, but presumably nobody tested mtd-utils on musl after "ubifs-utils: Add implementations for linux kernel printing functions” landed, which added more users of backtrace().

I think either mtd-utils should hard-depend on _something_ providing backtrace(), be it the libc or a drop-in library, or it should use backtrace() if present and gracefully fallback otherwise (as it’s a convenience feature). Not both, which is what this patch achieves.

That sounds plausible, that's possibly what commit 3516b8b7558a69dfd("Add libmissing") wanted to do.

Quoted 7 lines
Quoted 2 lines

I’ll send an alternative patch in a moment which uses libmissing.a instead of relying on an external libexecinfo.

I think looking for libexecinfo is perhaps fine, its that when backtrace is not found in libc and in libexecinfo, it should still work by falling back to stub.

Hi, Khem. IMHO,maybe copying 'execinfo.h' into musl is a hack way, then users could modify mtd-utils(eg. link external libexecinfo) according to the specific compiler, but that's not a common way for all compilers. What if the library contains 'backtrace' function is not named as 'libexecinfo'?

Quoted 6 lines
Quoted 4 lines

Note that the rest of the series is good, this is the only change I have comments on.

Ross
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

#6 lore raw

PATCH v4 4/4 ubifs-utils: extract_files: Include <linux/limits.h>

In reply to Fabio Estevam

Include <linux/limits.h> to fix the following build error when building with musl:

| ../git/ubifs-utils/fsck.ubifs/extract_files.c: In function 'parse_ino_node':
| ../git/ubifs-utils/fsck.ubifs/extract_files.c:144:47: error: 'XATTR_LIST_MAX' undeclared (first use in this function)
|   144 |         if (ino_node->xnms + ino_node->xcnt > XATTR_LIST_MAX) {
|       |                                               ^~~~~~~~~~~~~~
| ../git/ubifs-utils/fsck.ubifs/extract_files.c:144:47: note: each undeclared identifier is reported only once for each function it appears in
| make: *** [Makefile:4374: ubifs-utils/fsck.ubifs/fsck_ubifs-extract_files.o] Error 1

---
Changes since v3:
- None.

 ubifs-utils/fsck.ubifs/extract_files.c | 2 ++
 1 file changed, 2 insertions(+)
ubifs-utils/fsck.ubifs/extract_files.c +2 -0
index c83d37749bc0..000ef5d10565 100644
@@ -10,6 +10,8 @@
 #include <getopt.h>
 #include <sys/stat.h>
 
+#include <linux/limits.h>
+
 #include "linux_err.h"
 #include "bitops.h"
 #include "kmem.h"
Signature · 6 lines
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
#7 lore raw

Re: [PATCH v4 mtd-utils 4/4] ubifs-utils: extract_files: Include <linux/limits.h>

I cherry-picked the changes, save for the libexecinfo patch and applied them to mtd-utils.git master.

The execinfo related issue should be resolved by [1] which adds a check to mkfs.ubifs and properly links the libmissing stub.

Thanks,

David

[1] https://patchwork.ozlabs.org/project/linux-mtd/patch/[email protected]/

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/