Skip to contentSkip to conversation

vfdma

PATCH New Fabio Estevam 1 participant 1 message Feb 20, 2025

Subsystems (3)
Device tree bindings Arm i.MX and Layerscape Arm/Freescale vybrid Arm architecture
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 vfdma

From: Fabio Estevam <[email protected]>

According to fsl,dspi.yaml the expected order for describing the dmas and dma-names properties is "tx" first, followed by "rx".

Adjust it acordingly to fix the following dt-schema warnings:

spi@4002c000: dma-names:0: 'tx' was expected
spi@4002c000: dma-names:1: 'rx' was expected

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/nxp/vf/vfxxx.dtsi | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)
arch/arm/boot/dts/nxp/vf/vfxxx.dtsi +8 -9
index 6334ad4aec4b..597f20be82f1 100644
@@ -158,8 +158,8 @@ dspi0: spi@4002c000 {
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
-				dmas = <&edma1 1 12>, <&edma1 1 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 13>, <&edma1 1 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 

@@ -172,8 +172,8 @@ dspi1: spi@4002d000 {
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
-				dmas = <&edma1 1 14>, <&edma1 1 15>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 15>, <&edma1 1 14>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 

@@ -529,9 +529,8 @@ dspi2: spi@400ac000 {
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 10>,
-					<&edma1 0 11>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 11>, <&edma1 0 10>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 

@@ -544,8 +543,8 @@ dspi3: spi@400ad000 {
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 12>, <&edma1 0 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 13>, <&edma1 0 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
Signature · 1 line
2.34.1