Skip to contentSkip to conversation

net: hinic3: Add a driver for Huawei 3rd gen NIC

PATCH Superseded Gur Stavi 2 participants 3 messages Feb 24, 2025 – Feb 25, 2025

Subsystems (4)

v5 of 17 Superseded Latest is v17 →

lore
Share & tools
lore

Gur Stavi

author
#0 lore raw

v5 cover net: hinic3: Add a driver for Huawei 3rd gen NIC

This is the 1/3 patch of the patch-set described below.

The patch-set contains driver for Huawei's 3rd generation HiNIC Ethernet device that will be available in the future.

This is an SRIOV device, designed for data centers. Initially, the driver only supports VFs.

Following the discussion over RFC01, the code will be submitted in separate smaller patches where until the last patch the driver is non-functional. The RFC02 submission contains overall view of the entire driver but every patch will be posted as a standalone submission.

Changes:

RFC V01: https://lore.kernel.org/netdev/[email protected]

RFC V02: https://lore.kernel.org/netdev/[email protected]
* Reduce overall line of code by removing optional functionality.
* Break down into smaller patches.

PATCH 01 V01: https://lore.kernel.org/netdev/[email protected]
* Documentation style and consistency fixes (from Bjorn Helgaas)
* Use ipoll instead of custom code (from Andrew Lunn)
* Move dev_set_drvdata up in initialization order (from Andrew Lunn)
* Use netdev's max_mtu, min_mtu (from Andrew Lunn)
* Fix variable 'xxx' set but not used warnings (from Linux patchwork)

PATCH 01 V02: https://lore.kernel.org/netdev/[email protected]
* Add comment regarding usage of random MAC. (Andrew Lunn)
* Add COMPILE_TEST to Kconfig (Jakub Kicinski)

PATCH 01 V03: https://lore.kernel.org/netdev/[email protected]
* Rephrase Kconfig comment (Jakub Kicinski)
* Kconfig: add 'select AUXILIARY_BUS' (Kernel test robot)
* ARCH=um: missing include 'net/ip6_checksum.h' (Kernel test robot)

PATCH 01 V04: https://lore.kernel.org/netdev/[email protected]
* Improve naming consistency, missing hinic3 prefixes (Suman Ghosh)
* Change hinic3_remove_func to void (Suman Ghosh)
* Add adev_event_unregister (Suman Ghosh)
* Add comment for service types enum (Suman Ghosh)

PATCH 01 V05:
* Fix signed-by signatures (Przemek Kitszel)
* Expand initials in documentation (Przemek Kitszel)
* Update copyright messages to 2025 (Przemek Kitszel)
* Sort filenames in makefile (Przemek Kitszel)
* Sort include statements (Przemek Kitszel)
* Reduce padding in irq allocation struct (Przemek Kitszel)
* Replace memset of zero with '= {}' init (Przemek Kitszel)
* Revise mbox API to avoid using same pointer twice (Przemek Kitszel)
* Use 2 underscores for header file ifdef guards (Przemek Kitszel)
* Remove 'Intelligent' from Kconfig (Przemek Kitszel)
* Documentation, fix line length mismatch to header (Simon Horman)

Fan Gong (1):
hinic3: module initialization and tx/rx logic

 .../device_drivers/ethernet/huawei/hinic3.rst | 137 ++++
 MAINTAINERS                                   |   7 +
 drivers/net/ethernet/huawei/Kconfig           |   1 +
 drivers/net/ethernet/huawei/Makefile          |   1 +
 drivers/net/ethernet/huawei/hinic3/Kconfig    |  19 +
 drivers/net/ethernet/huawei/hinic3/Makefile   |  21 +
 .../ethernet/huawei/hinic3/hinic3_common.c    |  53 ++
 .../ethernet/huawei/hinic3/hinic3_common.h    |  27 +
 .../ethernet/huawei/hinic3/hinic3_hw_cfg.c    |  25 +
 .../ethernet/huawei/hinic3/hinic3_hw_cfg.h    |  54 ++
 .../ethernet/huawei/hinic3/hinic3_hw_comm.c   |  32 +
 .../ethernet/huawei/hinic3/hinic3_hw_comm.h   |  13 +
 .../ethernet/huawei/hinic3/hinic3_hw_intf.h   | 113 +++
 .../net/ethernet/huawei/hinic3/hinic3_hwdev.c |  24 +
 .../net/ethernet/huawei/hinic3/hinic3_hwdev.h |  81 ++
 .../net/ethernet/huawei/hinic3/hinic3_hwif.c  |  15 +
 .../net/ethernet/huawei/hinic3/hinic3_hwif.h  |  50 ++
 .../net/ethernet/huawei/hinic3/hinic3_lld.c   | 416 +++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_lld.h   |  21 +
 .../net/ethernet/huawei/hinic3/hinic3_main.c  | 420 +++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_mbox.c  |  16 +
 .../net/ethernet/huawei/hinic3/hinic3_mbox.h  |  15 +
 .../net/ethernet/huawei/hinic3/hinic3_mgmt.h  |  13 +
 .../huawei/hinic3/hinic3_mgmt_interface.h     | 105 +++
 .../huawei/hinic3/hinic3_netdev_ops.c         |  77 ++
 .../ethernet/huawei/hinic3/hinic3_nic_cfg.c   | 230 ++++++
 .../ethernet/huawei/hinic3/hinic3_nic_cfg.h   |  39 +
 .../ethernet/huawei/hinic3/hinic3_nic_dev.h   | 100 +++
 .../ethernet/huawei/hinic3/hinic3_nic_io.c    |  21 +
 .../ethernet/huawei/hinic3/hinic3_nic_io.h    | 118 +++
 .../huawei/hinic3/hinic3_queue_common.c       |  67 ++
 .../huawei/hinic3/hinic3_queue_common.h       |  54 ++
 .../net/ethernet/huawei/hinic3/hinic3_rss.c   |  24 +
 .../net/ethernet/huawei/hinic3/hinic3_rss.h   |  12 +
 .../net/ethernet/huawei/hinic3/hinic3_rx.c    | 402 ++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_rx.h    |  91 +++
 .../net/ethernet/huawei/hinic3/hinic3_tx.c    | 693 ++++++++++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_tx.h    | 130 ++++
 .../net/ethernet/huawei/hinic3/hinic3_wq.c    |  29 +
 .../net/ethernet/huawei/hinic3/hinic3_wq.h    |  76 ++
 40 files changed, 3842 insertions(+)
 create mode 100644 Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst
 create mode 100644 drivers/net/ethernet/huawei/hinic3/Kconfig
 create mode 100644 drivers/net/ethernet/huawei/hinic3/Makefile
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_common.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_common.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_intf.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwif.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwif.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_lld.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_lld.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_main.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mbox.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mbox.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mgmt.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mgmt_interface.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_netdev_ops.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_dev.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.h
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_wq.c
 create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_wq.h

base-commit: b66e19dcf684b21b6d3a1844807bd1df97ad197a

Signature · 1 line
2.45.2
author
#1 lore raw

PATCH v5 1/1 hinic3: module initialization and tx/rx logic

From: Fan Gong <[email protected]>

This is [1/3] part of hinic3 Ethernet driver initial submission. With this patch hinic3 is a valid kernel module but non-functional driver.

The driver parts contained in this patch:
Module initialization.
PCI driver registration but with empty id_table. Auxiliary driver registration.
Net device_ops registration but open/stop are empty stubs. tx/rx logic.

All major data structures of the driver are fully introduced with the code that uses them but without their initialization code that requires management interface with the hw.

---
 .../device_drivers/ethernet/huawei/hinic3.rst | 137 ++++
 MAINTAINERS                                   |   7 +
 drivers/net/ethernet/huawei/Kconfig           |   1 +
 drivers/net/ethernet/huawei/Makefile          |   1 +
 drivers/net/ethernet/huawei/hinic3/Kconfig    |  19 +
 drivers/net/ethernet/huawei/hinic3/Makefile   |  21 +
 .../ethernet/huawei/hinic3/hinic3_common.c    |  53 ++
 .../ethernet/huawei/hinic3/hinic3_common.h    |  27 +
 .../ethernet/huawei/hinic3/hinic3_hw_cfg.c    |  25 +
 .../ethernet/huawei/hinic3/hinic3_hw_cfg.h    |  54 ++
 .../ethernet/huawei/hinic3/hinic3_hw_comm.c   |  32 +
 .../ethernet/huawei/hinic3/hinic3_hw_comm.h   |  13 +
 .../ethernet/huawei/hinic3/hinic3_hw_intf.h   | 113 +++
 .../net/ethernet/huawei/hinic3/hinic3_hwdev.c |  24 +
 .../net/ethernet/huawei/hinic3/hinic3_hwdev.h |  81 ++
 .../net/ethernet/huawei/hinic3/hinic3_hwif.c  |  15 +
 .../net/ethernet/huawei/hinic3/hinic3_hwif.h  |  50 ++
 .../net/ethernet/huawei/hinic3/hinic3_lld.c   | 416 +++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_lld.h   |  21 +
 .../net/ethernet/huawei/hinic3/hinic3_main.c  | 420 +++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_mbox.c  |  16 +
 .../net/ethernet/huawei/hinic3/hinic3_mbox.h  |  15 +
 .../net/ethernet/huawei/hinic3/hinic3_mgmt.h  |  13 +
 .../huawei/hinic3/hinic3_mgmt_interface.h     | 105 +++
 .../huawei/hinic3/hinic3_netdev_ops.c         |  77 ++
 .../ethernet/huawei/hinic3/hinic3_nic_cfg.c   | 230 ++++++
 .../ethernet/huawei/hinic3/hinic3_nic_cfg.h   |  39 +
 .../ethernet/huawei/hinic3/hinic3_nic_dev.h   | 100 +++
 .../ethernet/huawei/hinic3/hinic3_nic_io.c    |  21 +
 .../ethernet/huawei/hinic3/hinic3_nic_io.h    | 118 +++
 .../huawei/hinic3/hinic3_queue_common.c       |  67 ++
 .../huawei/hinic3/hinic3_queue_common.h       |  54 ++
 .../net/ethernet/huawei/hinic3/hinic3_rss.c   |  24 +
 .../net/ethernet/huawei/hinic3/hinic3_rss.h   |  12 +
 .../net/ethernet/huawei/hinic3/hinic3_rx.c    | 402 ++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_rx.h    |  91 +++
 .../net/ethernet/huawei/hinic3/hinic3_tx.c    | 693 ++++++++++++++++++
 .../net/ethernet/huawei/hinic3/hinic3_tx.h    | 130 ++++
 .../net/ethernet/huawei/hinic3/hinic3_wq.c    |  29 +
 .../net/ethernet/huawei/hinic3/hinic3_wq.h    |  76 ++
 40 files changed, 3842 insertions(+)
Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst new file +137 -0
new file mode 100644
index 000000000000..e3dfd083fa52
@@ -0,0 +1,137 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================================================
+Linux kernel driver for Huawei Ethernet Device Driver (hinic3) family
+=====================================================================
+
+Overview
+========
+
+The hinic3 is a network interface card (NIC) for Data Center. It supports
+a range of link-speed devices (10GE, 25GE, 100GE, etc.). The hinic3
+devices can have multiple physical forms: LOM (Lan on Motherboard) NIC,
+PCIe standard NIC, OCP (Open Compute Project) NIC, etc.
+
+The hinic3 driver supports the following features:
+- IPv4/IPv6 TCP/UDP checksum offload
+- TSO (TCP Segmentation Offload), LRO (Large Receive Offload)
+- RSS (Receive Side Scaling)
+- MSI-X interrupt aggregation configuration and interrupt adaptation.
+- SR-IOV (Single Root I/O Virtualization).
+
+Content
+=======
+
+- Supported PCI vendor ID/device IDs
+- Source Code Structure of Hinic3 Driver
+- Management Interface
+
+Supported PCI vendor ID/device IDs
+==================================
+
+19e5:0222 - hinic3 PF/PPF
+19e5:375F - hinic3 VF
+
+Prime Physical Function (PPF) is responsible for the management of the
+whole NIC card. For example, clock synchronization between the NIC and
+the host. Any PF may serve as a PPF. The PPF is selected dynamically.
+
+Source Code Structure of Hinic3 Driver
+======================================
+
+========================  ================================================
+hinic3_pci_id_tbl.h       Supported device IDs
+hinic3_hw_intf.h          Interface between HW and driver
+hinic3_queue_common.[ch]  Common structures and methods for NIC queues
+hinic3_common.[ch]        Encapsulation of memory operations in Linux
+hinic3_csr.h              Register definitions in the BAR
+hinic3_hwif.[ch]          Interface for BAR
+hinic3_eqs.[ch]           Interface for AEQs and CEQs
+hinic3_mbox.[ch]          Interface for mailbox
+hinic3_mgmt.[ch]          Management interface based on mailbox and AEQ
+hinic3_wq.[ch]            Work queue data structures and interface
+hinic3_cmdq.[ch]          Command queue is used to post command to HW
+hinic3_hwdev.[ch]         HW structures and methods abstractions
+hinic3_lld.[ch]           Auxiliary driver adaptation layer
+hinic3_hw_comm.[ch]       Interface for common HW operations
+hinic3_mgmt_interface.h   Interface between firmware and driver
+hinic3_hw_cfg.[ch]        Interface for HW configuration
+hinic3_irq.c              Interrupt request
+hinic3_netdev_ops.c       Operations registered to Linux kernel stack
+hinic3_nic_dev.h          NIC structures and methods abstractions
+hinic3_main.c             Main Linux kernel driver
+hinic3_nic_cfg.[ch]       NIC service configuration
+hinic3_nic_io.[ch]        Management plane interface for TX and RX
+hinic3_rss.[ch]           Interface for Receive Side Scaling (RSS)
+hinic3_rx.[ch]            Interface for transmit
+hinic3_tx.[ch]            Interface for receive
+hinic3_ethtool.c          Interface for ethtool operations (ops)
+hinic3_filter.c           Interface for MAC address
+========================  ================================================
+
+Management Interface
+====================
+
+Asynchronous Event Queue (AEQ)
+------------------------------
+
+AEQ receives high priority events from the HW over a descriptor queue.
+Every descriptor is a fixed size of 64 bytes. AEQ can receive solicited or
+unsolicited events. Every device, VF or PF, can have up to 4 AEQs.
+Every AEQ is associated to a dedicated IRQ. AEQ can receive multiple types
+of events, but in practice the hinic3 driver ignores all events except for
+2 mailbox related events.
+
+Mailbox
+-------
+
+Mailbox is a communication mechanism between the hinic3 driver and the HW.
+Each device has an independent mailbox. Driver can use the mailbox to send
+requests to management. Driver receives mailbox messages, such as responses
+to requests, over the AEQ (using event HINIC3_AEQ_FOR_MBOX). Due to the
+limited size of mailbox data register, mailbox messages are sent
+segment-by-segment.
+
+Every device can use its mailbox to post request to firmware. The mailbox
+can also be used to post requests and responses between the PF and its VFs.
+
+Completion Event Queue (CEQ)
+----------------------------
+
+The implementation of CEQ is the same as AEQ. It receives completion events
+from HW over a fixed size descriptor of 32 bits. Every device can have up
+to 32 CEQs. Every CEQ has a dedicated IRQ. CEQ only receives solicited
+events that are responses to requests from the driver. CEQ can receive
+multiple types of events, but in practice the hinic3 driver ignores all
+events except for HINIC3_CMDQ that represents completion of previously
+posted commands on a cmdq.
+
+Command Queue (cmdq)
+--------------------
+
+Every cmdq has a dedicated work queue on which commands are posted.
+Commands on the work queue are fixed size descriptor of size 64 bytes.
+Completion of a command will be indicated using ctrl bits in the
+descriptor that carried the command. Notification of command completions
+will also be provided via event on CEQ. Every device has 4 command queues
+that are initialized as a set (called cmdqs), each with its own type.
+Hinic3 driver only uses type HINIC3_CMDQ_SYNC.
+
+Work Queues(WQ)
+---------------
+
+Work queues are logical arrays of fixed size WQEs. The array may be spread
+over multiple non-contiguous pages using indirection table. Work queues are
+used by I/O queues and command queues.
+
+Global function ID
+------------------
+
+Every function, PF or VF, has a unique ordinal identification within the device.
+Many management commands (mbox or cmdq) contain this ID so HW can apply the
+command effect to the right function.
+
+PF is allowed to post management commands to a subordinate VF by specifying the
+VFs ID. A VF must provide its own ID. Anti-spoofing in the HW will cause
+command from a VF to fail if it contains the wrong ID.
+
MAINTAINERS +7 -0
index 8019d5a97546..4ab3c961d9c5 100644
@@ -10689,6 +10689,13 @@ S:	Maintained
 F:	Documentation/networking/device_drivers/ethernet/huawei/hinic.rst
 F:	drivers/net/ethernet/huawei/hinic/
 
+HUAWEI 3RD GEN ETHERNET DRIVER
+M:	Fan Gong <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst
+F:	drivers/net/ethernet/huawei/hinic3/
+
 HUGETLB SUBSYSTEM
 M:	Muchun Song <[email protected]>
 L:	[email protected]
drivers/net/ethernet/huawei/Kconfig +1 -0
index c05fce15eb51..7d0feb1da158 100644
@@ -16,5 +16,6 @@ config NET_VENDOR_HUAWEI
 if NET_VENDOR_HUAWEI
 
 source "drivers/net/ethernet/huawei/hinic/Kconfig"
+source "drivers/net/ethernet/huawei/hinic3/Kconfig"
 
 endif # NET_VENDOR_HUAWEI
drivers/net/ethernet/huawei/Makefile +1 -0
index 2549ad5afe6d..59865b882879 100644
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_HINIC) += hinic/
+obj-$(CONFIG_HINIC3) += hinic3/
drivers/net/ethernet/huawei/hinic3/Kconfig new file +19 -0
new file mode 100644
index 000000000000..70e30a2af6a5
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Huawei driver configuration
+#
+
+config HINIC3
+	tristate "Huawei 3rd generation network adapters (HINIC3) support"
+	# Fields of HW and management structures are little endian and are
+	# currently not converted
+	depends on !CPU_BIG_ENDIAN
+	depends on X86 || ARM64 || COMPILE_TEST
+	depends on PCI_MSI && 64BIT
+	select AUXILIARY_BUS
+	help
+	  This driver supports HiNIC 3rd gen Network Adapter (HINIC3).
+	  The driver is supported on X86_64 and ARM64 little endian.
+
+	  To compile this driver as a module, choose M here.
+	  The module will be called hinic3.
drivers/net/ethernet/huawei/hinic3/Makefile new file +21 -0
new file mode 100644
index 000000000000..1bdf3ba4c121
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+obj-$(CONFIG_HINIC3) += hinic3.o
+
+hinic3-objs := hinic3_common.o \
+	       hinic3_hw_cfg.o \
+	       hinic3_hw_comm.o \
+	       hinic3_hwdev.o \
+	       hinic3_hwif.o \
+	       hinic3_lld.o \
+	       hinic3_main.o \
+	       hinic3_mbox.o \
+	       hinic3_netdev_ops.o \
+	       hinic3_nic_cfg.o \
+	       hinic3_nic_io.o \
+	       hinic3_queue_common.o \
+	       hinic3_rss.o \
+	       hinic3_rx.o \
+	       hinic3_tx.o \
+	       hinic3_wq.o
drivers/net/ethernet/huawei/hinic3/hinic3_common.c new file +53 -0

53 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_common.h new file +27 -0
new file mode 100644
index 000000000000..bb795dace04c
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved. */
+
+#ifndef _HINIC3_COMMON_H_
+#define _HINIC3_COMMON_H_
+
+#include <linux/device.h>
+
+#define HINIC3_MIN_PAGE_SIZE  0x1000
+
+struct hinic3_dma_addr_align {
+	u32        real_size;
+
+	void       *ori_vaddr;
+	dma_addr_t ori_paddr;
+
+	void       *align_vaddr;
+	dma_addr_t align_paddr;
+};
+
+int hinic3_dma_zalloc_coherent_align(struct device *dev, u32 size, u32 align,
+				     gfp_t flag,
+				     struct hinic3_dma_addr_align *mem_align);
+void hinic3_dma_free_coherent_align(struct device *dev,
+				    struct hinic3_dma_addr_align *mem_align);
+
+#endif
drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.c new file +25 -0
new file mode 100644
index 000000000000..33e0881f5914
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+#include <linux/device.h>
+
+#include "hinic3_hw_cfg.h"
+#include "hinic3_hwdev.h"
+#include "hinic3_hwif.h"
+#include "hinic3_mbox.h"
+
+bool hinic3_support_nic(struct hinic3_hwdev *hwdev)
+{
+	return ((u32)hwdev->cfg_mgmt->svc_cap.chip_svc_type &
+		BIT(HINIC3_SERVICE_T_NIC)) == 0 ? false : true;
+}
+
+u16 hinic3_func_max_qnum(struct hinic3_hwdev *hwdev)
+{
+	return hwdev->cfg_mgmt->svc_cap.nic_cap.max_sqs;
+}
+
+u8 hinic3_physical_port_id(struct hinic3_hwdev *hwdev)
+{
+	return hwdev->cfg_mgmt->svc_cap.port_id;
+}
drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.h new file +54 -0

54 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.c new file +32 -0
new file mode 100644
index 000000000000..434696ce7dc2
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+#include <linux/delay.h>
+
+#include "hinic3_hw_comm.h"
+#include "hinic3_hwdev.h"
+#include "hinic3_hwif.h"
+#include "hinic3_mbox.h"
+
+int hinic3_func_reset(struct hinic3_hwdev *hwdev, u16 func_id, u64 reset_flag)
+{
+	struct comm_cmd_func_reset func_reset = {};
+	struct mgmt_msg_params msg_params = {};
+	int err;
+
+	func_reset.func_id = func_id;
+	func_reset.reset_flag = reset_flag;
+
+	mgmt_msg_params_init_default(&msg_params, &func_reset,
+				     sizeof(func_reset));
+
+	err = hinic3_send_mbox_to_mgmt(hwdev, MGMT_MOD_COMM,
+				       COMM_CMD_FUNC_RESET, &msg_params);
+	if (err || func_reset.head.status) {
+		dev_err(hwdev->dev, "Failed to reset func resources, reset_flag 0x%llx, err: %d, status: 0x%x\n",
+			reset_flag, err, func_reset.head.status);
+		return -EIO;
+	}
+
+	return 0;
+}
drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.h new file +13 -0
new file mode 100644
index 000000000000..c33a1c77da9c
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved. */
+
+#ifndef _HINIC3_HW_COMM_H_
+#define _HINIC3_HW_COMM_H_
+
+#include "hinic3_hw_intf.h"
+
+struct hinic3_hwdev;
+
+int hinic3_func_reset(struct hinic3_hwdev *hwdev, u16 func_id, u64 reset_flag);
+
+#endif
drivers/net/ethernet/huawei/hinic3/hinic3_hw_intf.h new file +113 -0

113 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.c new file +24 -0
new file mode 100644
index 000000000000..6e8788a64925
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+#include "hinic3_hw_comm.h"
+#include "hinic3_hwdev.h"
+#include "hinic3_hwif.h"
+#include "hinic3_mbox.h"
+#include "hinic3_mgmt.h"
+
+int hinic3_init_hwdev(struct pci_dev *pdev)
+{
+	/* Completed by later submission due to LoC limit. */
+	return -EFAULT;
+}
+
+void hinic3_free_hwdev(struct hinic3_hwdev *hwdev)
+{
+	/* Completed by later submission due to LoC limit. */
+}
+
+void hinic3_set_api_stop(struct hinic3_hwdev *hwdev)
+{
+	/* Completed by later submission due to LoC limit. */
+}
drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.h new file +81 -0

81 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_hwif.c new file +15 -0
new file mode 100644
index 000000000000..5739f6edce09
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include "hinic3_common.h"
+#include "hinic3_hwdev.h"
+#include "hinic3_hwif.h"
+
+u16 hinic3_global_func_id(struct hinic3_hwdev *hwdev)
+{
+	return hwdev->hwif->attr.func_global_idx;
+}
drivers/net/ethernet/huawei/hinic3/hinic3_hwif.h new file +50 -0

50 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_lld.c new file +416 -0

416 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_lld.h new file +21 -0
new file mode 100644
index 000000000000..322b44803476
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved. */
+
+#ifndef _HINIC3_LLD_H_
+#define _HINIC3_LLD_H_
+
+#include <linux/auxiliary_bus.h>
+
+struct hinic3_event_info;
+
+#define HINIC3_NIC_DRV_NAME "hinic3"
+
+int hinic3_lld_init(void);
+void hinic3_lld_exit(void);
+void hinic3_adev_event_register(struct auxiliary_device *adev,
+				void (*event_handler)(struct auxiliary_device *adev,
+						      struct hinic3_event_info *event));
+void hinic3_adev_event_unregister(struct auxiliary_device *adev);
+struct hinic3_hwdev *hinic3_adev_get_hwdev(struct auxiliary_device *adev);
+
+#endif
drivers/net/ethernet/huawei/hinic3/hinic3_main.c new file +420 -0

420 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_mbox.c new file +16 -0
new file mode 100644
index 000000000000..e74d1eb09730
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+#include <linux/dma-mapping.h>
+
+#include "hinic3_common.h"
+#include "hinic3_hwdev.h"
+#include "hinic3_hwif.h"
+#include "hinic3_mbox.h"
+
+int hinic3_send_mbox_to_mgmt(struct hinic3_hwdev *hwdev, u8 mod, u16 cmd,
+			     const struct mgmt_msg_params *msg_params)
+{
+	/* Completed by later submission due to LoC limit. */
+	return -EFAULT;
+}
drivers/net/ethernet/huawei/hinic3/hinic3_mbox.h new file +15 -0
new file mode 100644
index 000000000000..d7a6c37b7eff
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved. */
+
+#ifndef _HINIC3_MBOX_H_
+#define _HINIC3_MBOX_H_
+
+#include <linux/bitfield.h>
+#include <linux/mutex.h>
+
+struct hinic3_hwdev;
+
+int hinic3_send_mbox_to_mgmt(struct hinic3_hwdev *hwdev, u8 mod, u16 cmd,
+			     const struct mgmt_msg_params *msg_params);
+
+#endif
drivers/net/ethernet/huawei/hinic3/hinic3_mgmt.h new file +13 -0
new file mode 100644
index 000000000000..4edabeb32112
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved. */
+
+#ifndef _HINIC3_MGMT_H_
+#define _HINIC3_MGMT_H_
+
+#include <linux/types.h>
+
+struct hinic3_hwdev;
+
+void hinic3_flush_mgmt_workq(struct hinic3_hwdev *hwdev);
+
+#endif
drivers/net/ethernet/huawei/hinic3/hinic3_mgmt_interface.h new file +105 -0

105 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_netdev_ops.c new file +77 -0

77 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.c new file +230 -0

230 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.h new file +39 -0
new file mode 100644
index 000000000000..b7ae0f631cf4
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved. */
+
+#ifndef _HINIC3_NIC_CFG_H_
+#define _HINIC3_NIC_CFG_H_
+
+#include <linux/types.h>
+
+#include "hinic3_hw_intf.h"
+#include "hinic3_mgmt_interface.h"
+
+struct hinic3_hwdev;
+struct hinic3_nic_dev;
+
+#define HINIC3_MIN_MTU_SIZE          256
+#define HINIC3_MAX_JUMBO_FRAME_SIZE  9600
+
+#define HINIC3_VLAN_ID_MASK          0x7FFF
+
+enum hinic3_nic_event_type {
+	HINIC3_NIC_EVENT_LINK_DOWN = 0,
+	HINIC3_NIC_EVENT_LINK_UP   = 1,
+};
+
+int hinic3_set_nic_feature_to_hw(struct hinic3_nic_dev *nic_dev);
+bool hinic3_test_support(struct hinic3_nic_dev *nic_dev,
+			 enum hinic3_nic_feature_cap feature_bits);
+void hinic3_update_nic_feature(struct hinic3_nic_dev *nic_dev, u64 feature_cap);
+
+int hinic3_set_port_mtu(struct net_device *netdev, u16 new_mtu);
+
+int hinic3_set_mac(struct hinic3_hwdev *hwdev, const u8 *mac_addr, u16 vlan_id, u16 func_id);
+int hinic3_del_mac(struct hinic3_hwdev *hwdev, const u8 *mac_addr, u16 vlan_id, u16 func_id);
+int hinic3_update_mac(struct hinic3_hwdev *hwdev, const u8 *old_mac, u8 *new_mac, u16 vlan_id,
+		      u16 func_id);
+
+int hinic3_force_drop_tx_pkt(struct hinic3_hwdev *hwdev);
+
+#endif
drivers/net/ethernet/huawei/hinic3/hinic3_nic_dev.h new file +100 -0

100 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.c new file +21 -0
new file mode 100644
index 000000000000..34a1f5bd5ac1
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+#include "hinic3_hw_comm.h"
+#include "hinic3_hw_intf.h"
+#include "hinic3_hwdev.h"
+#include "hinic3_hwif.h"
+#include "hinic3_nic_cfg.h"
+#include "hinic3_nic_dev.h"
+#include "hinic3_nic_io.h"
+
+int hinic3_init_nic_io(struct hinic3_nic_dev *nic_dev)
+{
+	/* Completed by later submission due to LoC limit. */
+	return -EFAULT;
+}
+
+void hinic3_free_nic_io(struct hinic3_nic_dev *nic_dev)
+{
+	/* Completed by later submission due to LoC limit. */
+}
drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.h new file +118 -0

118 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.c new file +67 -0

67 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.h new file +54 -0

54 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_rss.c new file +24 -0
new file mode 100644
index 000000000000..4a166c13eb38
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved.
+
+#include "hinic3_hwdev.h"
+#include "hinic3_hwif.h"
+#include "hinic3_nic_cfg.h"
+#include "hinic3_nic_dev.h"
+#include "hinic3_rss.h"
+
+void hinic3_clear_rss_config(struct net_device *netdev)
+{
+	struct hinic3_nic_dev *nic_dev = netdev_priv(netdev);
+
+	kfree(nic_dev->rss_hkey);
+	nic_dev->rss_hkey = NULL;
+
+	kfree(nic_dev->rss_indir);
+	nic_dev->rss_indir = NULL;
+}
+
+void hinic3_try_to_enable_rss(struct net_device *netdev)
+{
+	/* Completed by later submission due to LoC limit. */
+}
drivers/net/ethernet/huawei/hinic3/hinic3_rss.h new file +12 -0
new file mode 100644
index 000000000000..017c63fc0d53
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) Huawei Technologies Co., Ltd. 2025. All rights reserved. */
+
+#ifndef _HINIC3_RSS_H_
+#define _HINIC3_RSS_H_
+
+#include <linux/netdevice.h>
+
+void hinic3_try_to_enable_rss(struct net_device *netdev);
+void hinic3_clear_rss_config(struct net_device *netdev);
+
+#endif
drivers/net/ethernet/huawei/hinic3/hinic3_rx.c new file +402 -0

402 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_rx.h new file +91 -0

91 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_tx.c new file +693 -0

72 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_tx.h new file +130 -0

130 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic3/hinic3_wq.c new file +29 -0
new file mode 100644
index 000000000000..66516dad16c8

Lines of this file are not shown. View the raw message.

drivers/net/ethernet/huawei/hinic3/hinic3_wq.h new file +76 -0

76 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.45.2

Part of the diff is not shown here. View the raw message.

maintainer
#2 lore raw

Re: [PATCH net-next v05 1/1] hinic3: module initialization and tx/rx logic

Quoted 1 line · On Mon, 24 Feb 2025 13:39:39 +0200 Gur Stavi wrote:
 .../device_drivers/ethernet/huawei/hinic3.rst | 137 ++++

Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst: WARNING: document isn't included in any toctree