dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
Subsystems (4)
Rob Herring (Arm)
maintainerPATCH 1/2 dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
There's both a user and the datasheet[1] indicate that 6-bpp is supported as well.
[1] https://agdisplays.com/pub/media/catalog/datasheet/Mitsubishi/AA104XD12.pdf
--- .../bindings/display/panel/mitsubishi,aa104xd12.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml +3 -1
@@ -33,7 +33,9 @@ properties: description: Reference to the regulator powering the panel VCC pins. data-mapping: - const: jeida-24 + enum: + - jeida-18 + - jeida-24 width-mm: const: 210
Signature · 1 line
2.47.2
Rob Herring (Arm)
maintainerPATCH 2/2 dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
The Mitsubishi aa104xd12 panel requires an external backlight driver circuit, so allow the "backlight" property.
There are users of this panel without a vcc-supply, so it shouldn't be required.
--- .../devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml +1 -1
@@ -43,6 +43,7 @@ properties: height-mm: const: 158 + backlight: true panel-timing: true port: true
@@ -50,7 +51,6 @@ additionalProperties: false required: - compatible - - vcc-supply - data-mapping - width-mm - height-mm
Signature · 1 line
2.47.2
Re: [PATCH 2/2] dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
Quoted 7 lines · Rob Herring (Arm)
The Mitsubishi aa104xd12 panel requires an external backlight driver circuit, so allow the "backlight" property.
There are users of this panel without a vcc-supply, so it shouldn't be required.
Signed-off-by Rob Herring (Arm) <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Re: [PATCH 2/2] dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
In reply to Rob Herring (Arm)Quoted 11 lines · Rob Herring (Arm)
The Mitsubishi aa104xd12 panel requires an external backlight driver circuit, so allow the "backlight" property.
There are users of this panel without a vcc-supply, so it shouldn't be required.
Signed-off-by Rob Herring (Arm) <[email protected]>--- .../devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks!
Quoted 6 lines · Rob Herring (Arm)
There's both a user and the datasheet[1] indicate that 6-bpp is supported as well.
[1] https://agdisplays.com/pub/media/catalog/datasheet/Mitsubishi/AA104XD12.pdf
Signed-off-by Rob Herring (Arm) <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Quoted 10 lines · Rob Herring (Arm)
There's both a user and the datasheet[1] indicate that 6-bpp is supported as well.
[1] https://agdisplays.com/pub/media/catalog/datasheet/Mitsubishi/AA104XD12.pdf
Signed-off-by Rob Herring (Arm) <[email protected]>--- .../bindings/display/panel/mitsubishi,aa104xd12.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
Applied, thanks!