Skip to contentSkip to conversation

arm64: Introduce CIX P1 (SKY1) SoC

PATCH Superseded Peter Chen 3 participants 18 messages Feb 26, 2025 – Feb 27, 2025

Subsystems (4)

v2 of 11 Superseded Latest is v11 →

lore
Share & tools
lore

Peter Chen

author
#0 lore raw

v2 cover arm64: Introduce CIX P1 (SKY1) SoC

Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC. Orion O6 is the world's first open source Arm V9 Motherboard built by Radxa. You could find brief introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview

In this series, we add initial SoC and board support for Kernel building. Patch 1-2: Add dt-binding doc for CIX and its sky1 SoC
Patch 3: add related maintainter entry
Patch 4-5: add Arm64 build support
Patch 6: add initial dts support for SoC and Orion O6 board

To run upstream kernel at Orion O6 board, you need to use BIOS released by Radxa:
https://docs.radxa.com/en/orion/o6/bios/install-bios

Changes for v2:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=vendor-prefixes.yaml make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
- Re-order the patch set, and move vendor-perfixes to the 1st patch.
- Patch 4: Ordered Kconfig config entry by alpha-numerically
- Patch 5: Corrects the Ack tag's name
- Patch 6: see below.
1) Corrects the SoF tag's name
2) Fix several coding sytle issues
3) move linux,cma node to dts file
4) delete memory node, memory size is passed by firmware
5) delete uart2 node which will be added in future patches
6) Improve for pmu and cpu node to stands for more specific cpu model
7) Improve the timer node and add hypervisor virtual timer irq

Fugang Duan (1):
arm64: Kconfig: add ARCH_CIX for cix silicons

Peter Chen (5):
dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.
dt-bindings: arm: add CIX P1 (SKY1) SoC
MAINTAINERS: Add CIX SoC maintainer entry
arm64: defconfig: Enable CIX SoC
arm64: dts: cix: add initial CIX P1(SKY1) dts support

 .../devicetree/bindings/arm/cix.yaml          |  26 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   8 +
 arch/arm64/Kconfig.platforms                  |   6 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/cix/Makefile              |   2 +
 arch/arm64/boot/dts/cix/sky1-orion-o6.dts     |  26 +++
 arch/arm64/boot/dts/cix/sky1.dtsi             | 217 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 9 files changed, 289 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cix.yaml
 create mode 100644 arch/arm64/boot/dts/cix/Makefile
 create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
 create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v2 1/6 dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.

CIX Technology Group Co., Ltd. is a high performance Arm SoC design company. Link: https://www.cixtech.com/.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 5079ca6ce1d1..5e76223e4570 100644
@@ -302,6 +302,8 @@ patternProperties:
     description: Cirrus Logic, Inc.
   "^cisco,.*":
     description: Cisco Systems, Inc.
+  "^cix,.*":
+    description: CIX Technology Group Co., Ltd.
   "^clockwork,.*":
     description: Clockwork Tech LLC
   "^cloos,.*":
Signature · 1 line
2.25.1
maintainer Acked-by on v2 1/6
#3 lore raw

Re: [PATCH v2 1/6] dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.

In reply to Peter Chen
Quoted 5 lines · Peter Chen

CIX Technology Group Co., Ltd. is a high performance Arm SoC design company. Link: https://www.cixtech.com/.

---

<form letter>
This is an automated instruction, just in case, because many review tags are being ignored. If you know the process, you can skip it (please do not feel offended by me posting it here - no bad intentions intended). If you do not know the process, here is a short explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of patchset, under or above your Signed-off-by tag, unless patch changed significantly (e.g. new properties added to the DT bindings). Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.

Full context and explanation:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577
</form letter>

Best regards,
Krzysztof

author
#4 lore raw

PATCH v2 2/6 dt-bindings: arm: add CIX P1 (SKY1) SoC

In reply to Peter Chen

Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC, it consists several SoC models like CP8180, CD8180, etc.

---
 .../devicetree/bindings/arm/cix.yaml          | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cix.yaml
Documentation/devicetree/bindings/arm/cix.yaml new file +26 -0
new file mode 100644
index 000000000000..114dab4bc4d2
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX platforms
+
+maintainers:
+  - Peter Chen <[email protected]>
+  - Fugang Duan <[email protected]>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Radxa Orion O6
+        items:
+          - const: radxa,orion-o6
+          - const: cix,sky1
+
+additionalProperties: true
+
+...
Signature · 1 line
2.25.1
#5 lore raw

Re: [PATCH v2 2/6] dt-bindings: arm: add CIX P1 (SKY1) SoC

Quoted 6 lines · Peter Chen

Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC, it consists several SoC models like CP8180, CD8180, etc.

---

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of patchset, under or above your Signed-off-by tag, unless patch changed significantly (e.g. new properties added to the DT bindings). Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

If a tag was not added on purpose, please state why and what changed. </form letter>

Best regards,
Krzysztof

author
#6 lore raw

Re: [PATCH v2 2/6] dt-bindings: arm: add CIX P1 (SKY1) SoC

Quoted 24 lines · Krzysztof Kozlowski

EXTERNAL EMAIL

Quoted 6 lines · Peter Chen

Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC, it consists several SoC models like CP8180, CD8180, etc.

---

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of patchset, under or above your Signed-off-by tag, unless patch changed significantly (e.g. new properties added to the DT bindings). Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.

Quoted 6 lines

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

If a tag was not added on purpose, please state why and what changed. </form letter>

I have checked the review-process again at:
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=935897
It seems no one gives any Reviewed-by or Acked-by Tag.

If I am missing something, please correct me.

Signature · 2 lines
Best regards,
Peter
#7 lore raw

Re: [PATCH v2 2/6] dt-bindings: arm: add CIX P1 (SKY1) SoC

Quoted 28 lines · Peter Chen
Quoted 27 lines · Krzysztof Kozlowski

EXTERNAL EMAIL

Quoted 6 lines · Peter Chen

Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC, it consists several SoC models like CP8180, CD8180, etc.

---

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of patchset, under or above your Signed-off-by tag, unless patch changed significantly (e.g. new properties added to the DT bindings). Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

Quoted 6 lines
Quoted 3 lines

If a tag was not added on purpose, please state why and what changed. </form letter>

I have checked the review-process again at:
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=935897

This does not matter - that's not a patchwork anyone uses...

Quoted 1 line

It seems no one gives any Reviewed-by or Acked-by Tag.

You were directly addressed! So you got email and what did you do with it?

And lists received it:
https://lore.kernel.org/all/[email protected]/

Quoted 3 lines

If I am missing something, please correct me.

Best regards,
Krzysztof

author
#8 lore raw

Re: [PATCH v2 2/6] dt-bindings: arm: add CIX P1 (SKY1) SoC

Quoted 33 lines · Krzysztof Kozlowski
Quoted 26 lines
Quoted 26 lines · Peter Chen
Quoted 6 lines

Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC, it consists several SoC models like CP8180, CD8180, etc.

---

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of patchset, under or above your Signed-off-by tag, unless patch changed significantly (e.g. new properties added to the DT bindings). Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

Quoted 6 lines
Quoted 3 lines

If a tag was not added on purpose, please state why and what changed. </form letter>

I have checked the review-process again at:
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=935897

Quoted 9 lines

This does not matter - that's not a patchwork anyone uses...

Quoted 1 line

It seems no one gives any Reviewed-by or Acked-by Tag.

You were directly addressed! So you got email and what did you do with it?

And lists received it:
https://lore.kernel.org/all/[email protected]/

I am sorry about that. I checked this email with our IT engineers at office365 administration page, it was not received by Microsoft office365 server, we don't know what's the reason.

I will put your Reviewed-by tag when sending v3 patch, may I get your Ack for the 1st patch:
https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#u

Signature · 2 lines
Best regards,
Peter
#9 lore raw

Re: [PATCH v2 2/6] dt-bindings: arm: add CIX P1 (SKY1) SoC

Quoted 40 lines · Peter Chen
Quoted 39 lines · Krzysztof Kozlowski
Quoted 26 lines
Quoted 26 lines · Peter Chen
Quoted 6 lines

Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC, it consists several SoC models like CP8180, CD8180, etc.

---

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of patchset, under or above your Signed-off-by tag, unless patch changed significantly (e.g. new properties added to the DT bindings). Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

Quoted 6 lines
Quoted 3 lines

If a tag was not added on purpose, please state why and what changed. </form letter>

I have checked the review-process again at:
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=935897

This does not matter - that's not a patchwork anyone uses...

Quoted 1 line

It seems no one gives any Reviewed-by or Acked-by Tag.

You were directly addressed! So you got email and what did you do with it?

Quoted 7 lines
Quoted 3 lines

And lists received it:
https://lore.kernel.org/all/[email protected]/

I am sorry about that. I checked this email with our IT engineers at office365 administration page, it was not received by Microsoft office365 server, we don't know what's the reason.

That's the only email which did not reach you, I think. 4 or 5 others did, so this could mean your system will spam/reject silently anything with review tag (or email address).

If so, your corporate mail system is not suitable for upstream work (Microsoft outlook is known of poor quality in that matter and that's not the first case people have trouble with Outlook servers) and maybe you should switch to b4-relay and other mail boxes.

Quoted 4 lines

I will put your Reviewed-by tag when sending v3 patch, may I get your Ack for the 1st patch:
https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#u

I'll send it, but I still have doubts Microsoft won't put me in spam :/

Best regards,
Krzysztof

author
#10 lore raw

Re: [PATCH v2 2/6] dt-bindings: arm: add CIX P1 (SKY1) SoC

Quoted 29 lines · Krzysztof Kozlowski
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines

I have checked the review-process again at:
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=935897

This does not matter - that's not a patchwork anyone uses...

Quoted 1 line

It seems no one gives any Reviewed-by or Acked-by Tag.

You were directly addressed! So you got email and what did you do with it?

Quoted 7 lines
Quoted 3 lines

And lists received it:
https://lore.kernel.org/all/[email protected]/

I am sorry about that. I checked this email with our IT engineers at office365 administration page, it was not received by Microsoft office365 server, we don't know what's the reason.

That's the only email which did not reach you, I think. 4 or 5 others did, so this could mean your system will spam/reject silently anything with review tag (or email address).

If so, your corporate mail system is not suitable for upstream work (Microsoft outlook is known of poor quality in that matter and that's not the first case people have trouble with Outlook servers) and maybe you should switch to b4-relay and other mail boxes.

Quoted 1 line
Quoted 7 lines
Quoted 3 lines

I will put your Reviewed-by tag when sending v3 patch, may I get your Ack for the 1st patch:
https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#u

I'll send it, but I still have doubts Microsoft won't put me in spam :/

Hi Krzysztof,

Do you use kernel.org as your smtp server? It may kernel.org's smtp server issue, both lore.kernel.org[1] and patchwork.kernel.org[2] have received your ack for my v2 patch.

But only lore.kernel.org [3] received your reviewed-by Tag for my v1 patch, the patch.kernel.org[4] did not receive it, office365 server for my company also did not receive it.

Another strange is I did not received [5], but my colleagues in our upstream mail list ([email protected]) received it, I have not in that list at that time (now I am at it), but my name is at your reply to, it seems kernel.org did not send to me.

That's just my suspect, if someone meets the similar issues in future, it may prove my suspect.

[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/#26265571
[3] https://lore.kernel.org/all/[email protected]/
[4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
[5] https://lore.kernel.org/all/[email protected]/

Signature · 2 lines
Best regards,
Peter
author
#11 lore raw

PATCH v2 3/6 MAINTAINERS: Add CIX SoC maintainer entry

In reply to Peter Chen

Using this entry as the maintainers information for CIX SKY series SoCs.

---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)
MAINTAINERS +8 -0
index efee40ea589f..200d2529c8e5 100644
@@ -2354,6 +2354,14 @@ F:	arch/arm/boot/compressed/misc-ep93xx.h
 F:	arch/arm/mach-ep93xx/
 F:	drivers/iio/adc/ep93xx_adc.c
 
+ARM/CIX SKY ARM ARCHITECTURE
+M:	Peter Chen <[email protected]>
+M:	Fugang Duan <[email protected]>
+R:	CIX Linux Kernel Upstream Group <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/arm/cix.yaml
+
 ARM/CLKDEV SUPPORT
 M:	Russell King <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
Signature · 1 line
2.25.1
author
#12 lore raw

PATCH v2 4/6 arm64: Kconfig: add ARCH_CIX for cix silicons

In reply to Peter Chen

From: Fugang Duan <[email protected]>

Add ARCH_CIX for CIX SoC series support.

---
Changes for v2:
- Ordered Kconfig config entry by alpha-numerically

 arch/arm64/Kconfig.platforms | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm64/Kconfig.platforms +6 -0
index 02f9248f7c84..abe41db9b9b3 100644
@@ -106,6 +106,12 @@ config ARCH_BLAIZE
 	help
 	  This enables support for the Blaize SoC family
 
+config ARCH_CIX
+	bool "Cixtech SoC family"
+	help
+	  This enables support for the Cixtech SoC family,
+	  like P1(sky1).
+
 config ARCH_EXYNOS
 	bool "Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
Signature · 1 line
2.25.1
author
#13 lore raw

PATCH v2 5/6 arm64: defconfig: Enable CIX SoC

In reply to Peter Chen

Enable CIX SoC support at ARM64 defconfig

---
Changes for v2:
- Corrects the Ack tag's name

 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index cb7da4415599..1dd46d200401 100644
@@ -45,6 +45,7 @@ CONFIG_ARCH_BCMBCA=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_ARCH_BLAIZE=y
+CONFIG_ARCH_CIX=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_K3=y
Signature · 1 line
2.25.1
author
#14 lore raw

PATCH v2 6/6 arm64: dts: cix: add initial CIX P1(SKY1) dts support

In reply to Peter Chen

CIX SKY1 SoC is high performance Armv9 SoC designed by Cixtech, and Orion O6 is open source motherboard launched by Radxa. See below for detail:
https://docs.radxa.com/en/orion/o6/getting-started/introduction

In this commit, it only adds limited components for running initramfs at Orion O6.

---
Changes for v2:
- Corrects the SoF tag's name
- Fix several coding sytle issues
- move linux,cma node to dts file
- delete memory node, memory size is passed by firmware
- delete uart2 node which will be added in future patches
- Improve for pmu and cpu node to stands for more specific cpu model
- Improve the timer node and add hypervisor virtual timer irq
- Pass "make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb"

 arch/arm64/boot/dts/Makefile              |   1 +
 arch/arm64/boot/dts/cix/Makefile          |   2 +
 arch/arm64/boot/dts/cix/sky1-orion-o6.dts |  26 +++
 arch/arm64/boot/dts/cix/sky1.dtsi         | 217 ++++++++++++++++++++++
 4 files changed, 246 insertions(+)
 create mode 100644 arch/arm64/boot/dts/cix/Makefile
 create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
 create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
arch/arm64/boot/dts/Makefile +1 -0
index 79b73a21ddc2..8e7ccd0027bd 100644
@@ -13,6 +13,7 @@ subdir-y += bitmain
 subdir-y += blaize
 subdir-y += broadcom
 subdir-y += cavium
+subdir-y += cix
 subdir-y += exynos
 subdir-y += freescale
 subdir-y += hisilicon
arch/arm64/boot/dts/cix/Makefile new file +2 -0
new file mode 100644
index 000000000000..ed3713982012
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
arch/arm64/boot/dts/cix/sky1-orion-o6.dts new file +26 -0
new file mode 100644
index 000000000000..78f4fcd87216
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+/ {
+	model = "Radxa Orion O6";
+	compatible = "radxa,orion-o6", "cix,sky1";
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x28000000>;
+			linux,cma-default;
+		};
+	};
+};
arch/arm64/boot/dts/cix/sky1.dtsi new file +217 -0

217 lines not on this page · raw message

Signature · 1 line
2.25.1
#15 lore raw

Re: [PATCH v2 6/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support

Quoted 8 lines · Peter Chen
arch/arm64/boot/dts/cix/sky1.dtsi new file +8 -0
+				core7 {
+					cpu = <&cpu7>;
+				};
+				core8 {
+					cpu = <&cpu8>;
+				};
+				core9 {
+					cpu = <&cpu9>;

arch/arm64/boot/dts/cix/sky1.dtsi line 154

Quoted 10 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +10 -0
+				};
+				core10 {
+					cpu = <&cpu10>;
+				};
+				core11 {
+					cpu = <&cpu11>;
+				};
+			};
+		};
+

Stray blank line

Quoted 17 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +17 -0
+	};
+
+	pmu-a520 {
+		compatible = "arm,cortex-a520-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a720 {
+		compatible = "arm,cortex-a720-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-spe {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
+	};
+

arch/arm64/boot/dts/cix/sky1.dtsi line 181

Quoted 10 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +10 -0
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x20 0>;

Ranges is like reg, so after compatible. See DTS coding style.

Best regards,
Krzysztof

#16 lore raw
In reply to Peter Chen

Hi Peter,

I'm really happy to see the linux mainline upstream work sent. And I have also reveived radxa orion o6 before the Chinese new year. I have heard that CIX is testing vendor kernel with ACPI. And now the mainline upstream work is based on devicetree. I want to know what the upstream work of CIX would go in the future, are we going to toggle to ACPI instead of devicetree?

And it would be good to let outsiders know the plan/roadmap of upstream. For example collaboara is doing good job on upstreaming rockchip[1][2] and mediatek[3] socs.

[1] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md
[2] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3576/-/blob/main/mainline-status.md?ref_type=heads
[3] https://gitlab.collabora.com/mediatek/aiot/wiki/-/blob/main/mainline-status.md

Best regards,
Jianfeng

author
#17 lore raw
Quoted 9 lines · Jianfeng Liu

Hi Peter,

I'm really happy to see the linux mainline upstream work sent. And I have also reveived radxa orion o6 before the Chinese new year. I have heard that CIX is testing vendor kernel with ACPI. And now the mainline upstream work is based on devicetree. I want to know what the upstream work of CIX would go in the future, are we going to toggle to ACPI instead of devicetree?

Quoted 8 lines

And it would be good to let outsiders know the plan/roadmap of upstream. For example collaboara is doing good job on upstreaming rockchip[1][2] and mediatek[3] socs.

[1] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md
[2] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3576/-/blob/main/mainline-status.md?ref_type=heads
[3] https://gitlab.collabora.com/mediatek/aiot/wiki/-/blob/main/mainline-status.md

Hi Jianfeng,

Thanks for your interesting of our hardware. Radxa will open our v6.1 device tree vendor kernel source code at the beginning of next month. For ACPI vendor kernel source code based on v6.6, it has planned to open at Q2 of this year.

For upstream, we will submit support based on device tree first, since some common code changes are needed for supporting ACPI well at Arm, it may involve lots of discussion. After most of IP drivers are supported by upstream kernel, we will start ACPI upstream work.

For upstream status record for CIX SoC, we will find some public place for it.

Signature · 2 lines
Best regards,
Peter