Skip to contentSkip to conversation

PCI: Enable Configuration RRS SV early

PATCH Applied Bjorn Helgaas 1 participant 2 messages Mar 3, 2025 – Mar 10, 2025 PCI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 PCI: Enable Configuration RRS SV early

From: Bjorn Helgaas <[email protected]>

Following a reset, a Function may respond to Config Requests with Request Retry Status (RRS) Completion Status to indicate that it is temporarily unable to process the Request, but will be able to process the Request in the future (PCIe r6.0, sec 2.3.1).

If the Configuration RRS Software Visibility feature is enabled and a Root Complex receives RRS for a config read of the Vendor ID, the Root Complex completes the Request to the host by returning PCI_VENDOR_ID_PCI_SIG, 0x0001 (sec 2.3.2).

The Config RRS SV feature applies only to Root Ports and is not directly related to pci_scan_bridge_extend(). Move the RRS SV enable to set_pcie_port_type() where we handle other PCIe-specific configuration.

---
 drivers/pci/probe.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/pci/probe.c +5 -3
index b6536ed599c3..0b013b196d00 100644
@@ -1373,8 +1373,6 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
 			      bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
 
-	pci_enable_rrs_sv(dev);
-
 	if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
 	    !is_cardbus && !broken) {
 		unsigned int cmax, buses;
@@ -1615,6 +1613,11 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pdev->pcie_cap = pos;
 	pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
 	pdev->pcie_flags_reg = reg16;
+
+	type = pci_pcie_type(pdev);
+	if (type == PCI_EXP_TYPE_ROOT_PORT)
+		pci_enable_rrs_sv(pdev);
+
 	pci_read_config_dword(pdev, pos + PCI_EXP_DEVCAP, &pdev->devcap);
 	pdev->pcie_mpss = FIELD_GET(PCI_EXP_DEVCAP_PAYLOAD, pdev->devcap);
 
@@ -1631,7 +1634,6 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	 * correctly so detect impossible configurations here and correct
 	 * the port type accordingly.
 	 */
-	type = pci_pcie_type(pdev);
 	if (type == PCI_EXP_TYPE_DOWNSTREAM) {
 		/*
 		 * If pdev claims to be downstream port but the parent
Signature · 1 line
2.34.1
author Applied
#1 lore raw
Quoted 12 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Following a reset, a Function may respond to Config Requests with Request Retry Status (RRS) Completion Status to indicate that it is temporarily unable to process the Request, but will be able to process the Request in the future (PCIe r6.0, sec 2.3.1).

If the Configuration RRS Software Visibility feature is enabled and a Root Complex receives RRS for a config read of the Vendor ID, the Root Complex completes the Request to the host by returning PCI_VENDOR_ID_PCI_SIG, 0x0001 (sec 2.3.2).

Quoted 5 lines

The Config RRS SV feature applies only to Root Ports and is not directly related to pci_scan_bridge_extend(). Move the RRS SV enable to set_pcie_port_type() where we handle other PCIe-specific configuration.

Applied to pci/enumeration for v6.15

Quoted 40 lines
---
 drivers/pci/probe.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/pci/probe.c +5 -3
index b6536ed599c3..0b013b196d00 100644
@@ -1373,8 +1373,6 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
 			      bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
 
-	pci_enable_rrs_sv(dev);
-
 	if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
 	    !is_cardbus && !broken) {
 		unsigned int cmax, buses;
@@ -1615,6 +1613,11 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pdev->pcie_cap = pos;
 	pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
 	pdev->pcie_flags_reg = reg16;
+
+	type = pci_pcie_type(pdev);
+	if (type == PCI_EXP_TYPE_ROOT_PORT)
+		pci_enable_rrs_sv(pdev);
+
 	pci_read_config_dword(pdev, pos + PCI_EXP_DEVCAP, &pdev->devcap);
 	pdev->pcie_mpss = FIELD_GET(PCI_EXP_DEVCAP_PAYLOAD, pdev->devcap);
 
@@ -1631,7 +1634,6 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	 * correctly so detect impossible configurations here and correct
 	 * the port type accordingly.
 	 */
-	type = pci_pcie_type(pdev);
 	if (type == PCI_EXP_TYPE_DOWNSTREAM) {
 		/*
 		 * If pdev claims to be downstream port but the parent
Signature · 1 line
2.34.1