riscv: Refactoring sbi fwft tests
RFC PATCH 1/1 riscv: Refactoring sbi fwft tests
This patch refactors the current sbi fwft tests
(pte_ad_hw_updating, misaligned_exc_deleg)
--- riscv/sbi-fwft.c | 58 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 45 insertions(+), 13 deletions(-)
riscv/sbi-fwft.c +45 -13
@@ -19,6 +19,15 @@void check_fwft (void ); +static bool env_or_skip (const char *env) +{ +if (!getenv (env)) { +report_skip ("missing %s environment variable" , env); +return false; + } + +return true; +}static struct sbiret fwft_set_raw (unsigned long feature,unsigned long value,unsigned long flags) {
@@ -66,6 +75,13 @@ static void fwft_check_reserved(unsigned long id)sbiret_report_error (&ret,SBI_ERR_DENIED ,"set reserved feature 0x%lx" , id); } +static void fwft_check_reset (uint32_t feature,unsigned long reset) +{ +struct sbiret ret =fwft_get (feature); + +sbiret_report (&ret,SBI_SUCCESS , reset,"resets to %lu" , reset); +} +static void fwft_check_base (void ) {report_prefix_push ("base" );
@@ -99,18 +115,32 @@ static struct sbiret fwft_misaligned_exc_get(void)static void fwft_check_misaligned_exc_deleg (void ) {struct sbiret ret; +unsigned long expected;report_prefix_push ("misaligned_exc_deleg" ); ret =fwft_misaligned_exc_get (); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { -report_skip ("SBI_FWFT_MISALIGNED_EXC_DELEG is not supported" ); +if (ret.error !=SBI_SUCCESS ) { +if (env_or_skip ("SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG" )) { + expected = (unsigned long )strtoul (getenv ("SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG" ),NULL ,0 ); +if (expected ==1 ) + { +report_fail ("not supported by platform" ); +return ; + } + } +report_skip ("not supported by platform" );return ; }if (!sbiret_report_error (&ret,SBI_SUCCESS ,"Get misaligned deleg feature" ))return ; +if (env_or_skip ("MISALIGNED_EXC_DELEG_RESET" )) { + expected = (unsigned long )strtoul (getenv ("MISALIGNED_EXC_DELEG_RESET" ),NULL ,0 ); +fwft_check_reset (SBI_FWFT_MISALIGNED_EXC_DELEG , expected); + } + ret =fwft_misaligned_exc_set (2 ,0 );sbiret_report_error (&ret,SBI_ERR_INVALID_PARAM ,"Set misaligned deleg feature invalid value 2" );
@@ -129,16 +159,10 @@ static void fwft_check_misaligned_exc_deleg(void)#endif /* Set to 0 and check after with get */ - ret =fwft_misaligned_exc_set (0 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 0" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,0 ,"Get misaligned deleg feature expected value 0" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,0 );/* Set to 1 and check after with get */ - ret =fwft_misaligned_exc_set (1 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 1" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,1 ,"Get misaligned deleg feature expected value 1" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 );install_exception_handler (EXC_LOAD_MISALIGNED , misaligned_handler);
@@ -257,11 +281,20 @@ static void fwft_check_pte_ad_hw_updating(void) {struct sbiret ret;bool enabled; +unsigned long expected;report_prefix_push ("pte_ad_hw_updating" ); ret =fwft_get (SBI_FWFT_PTE_AD_HW_UPDATING ); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { +if (ret.error !=SBI_SUCCESS ) { +if (env_or_skip ("SBI_HAVE_FWFT_PTE_AD_HW_UPDATING" )) { + expected = (unsigned long )strtoul (getenv ("SBI_HAVE_FWFT_PTE_AD_HW_UPDATING" ),NULL ,0 ); +if (expected ==1 ) + { +report_fail ("not supported by platform" ); +return ; + } + }report_skip ("not supported by platform" );return ; }else if (!sbiret_report_error (&ret,SBI_SUCCESS ,"get" )) {
@@ -269,10 +302,9 @@ static void fwft_check_pte_ad_hw_updating(void)return ; } -report (ret.value ==0 || ret.value ==1 ,"first get value is 0/1" ); +fwft_check_reset (SBI_FWFT_PTE_AD_HW_UPDATING ,1 ); enabled = ret.value; -report_kfail (true, !enabled,"resets to 0" );install_exception_handler (EXC_LOAD_PAGE_FAULT , adue_read_handler);install_exception_handler (EXC_STORE_PAGE_FAULT , adue_write_handler);
Signature · 1 line
2.34.1
Quoted 15 lines · Akshay Behl
This patch refactors the current sbi fwft tests
(pte_ad_hw_updating,misaligned_exc_deleg)Signed-off-by Akshay Behl <[email protected]>--- riscv/sbi-fwft.c | 58 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 45 insertions(+), 13 deletions(-)riscv/sbi-fwft.c +0
-0@@ -19,6 +19,15 @@void check_fwft (void );
riscv/sbi-fwft.c line 30
Quoted 10 lines
riscv/sbi-fwft.c +9
-0+static bool env_or_skip (const char *env) +{ +if (!getenv (env)) { +report_skip ("missing %s environment variable" , env); +return false; + } + +return true; +}
We already have this in riscv/sbi.c so we should share it. We can just make it a static inline in sbi-tests.h
riscv/sbi-fwft.c static void fwft_check_reserved(unsigned long id) · line 83
Quoted 13 lines
riscv/sbi-fwft.c +6
-0static struct sbiret fwft_set_raw (unsigned long feature,unsigned long value,unsigned long flags) {@@ -66,6 +75,13 @@ static void fwft_check_reserved(unsigned long id)sbiret_report_error (&ret,SBI_ERR_DENIED ,"set reserved feature 0x%lx" , id); } +static void fwft_check_reset (uint32_t feature,unsigned long reset) +{ +struct sbiret ret =fwft_get (feature); + +sbiret_report (&ret,SBI_SUCCESS , reset,"resets to %lu" , reset); +}
Yes, this is the function I suggested we add, but you neglected to add the comment above it that I also suggested.
/* Must be called before any fwft_set() call is made for @feature */
Quoted 7 lines
riscv/sbi-fwft.c +1
-0+static void fwft_check_base (void ) {report_prefix_push ("base" );@@ -99,18 +115,32 @@ static struct sbiret fwft_misaligned_exc_get(void)static void fwft_check_misaligned_exc_deleg (void ) {
riscv/sbi-fwft.c static struct sbiret fwft_misaligned_exc_get(void) · line 124
Quoted 10 lines
riscv/sbi-fwft.c +3
-2struct sbiret ret; +unsigned long expected;report_prefix_push ("misaligned_exc_deleg" ); ret =fwft_misaligned_exc_get (); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { -report_skip ("SBI_FWFT_MISALIGNED_EXC_DELEG is not supported" ); +if (ret.error !=SBI_SUCCESS ) { +if (env_or_skip ("SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG" )) {
We don't want env_or_skip() here since we don't want to output SKIP logs for _HAVE_ environment variables. env_or_skip() is for getting expected values for tests. In those cases, without the env, there's no expected value to compare with, so we must skip the test.
riscv/sbi-fwft.c static struct sbiret fwft_misaligned_exc_get(void) · line 126
Quoted 2 lines
riscv/sbi-fwft.c +2
-0+ expected = (unsigned long )strtoul (getenv ("SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG" ),NULL ,0 ); +if (expected ==1 )
We have env_enabled() in riscv/sbi.c which we can move to sbi-tests.h as a static inline. That's what we should use here. (It doesn't use strtoul, since there's no need to in order to compare with the string "1".)
riscv/sbi-fwft.c static struct sbiret fwft_misaligned_exc_get(void) · line 127
Quoted 1 line
riscv/sbi-fwft.c +1
-0+ {
This { should be on the same line as the if.
riscv/sbi-fwft.c static struct sbiret fwft_misaligned_exc_get(void) · line 128
Quoted 1 line
riscv/sbi-fwft.c +1
-0+report_fail ("not supported by platform" );
This should be sbiret_report_error(&ret, SBI_SUCCESS, "supported") since SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG says it's supported and we want to see what error code we get when it's not success.
riscv/sbi-fwft.c static struct sbiret fwft_misaligned_exc_get(void) · line 140
Quoted 12 lines
riscv/sbi-fwft.c +6
-0+return ; + } + } +report_skip ("not supported by platform" );return ; }if (!sbiret_report_error (&ret,SBI_SUCCESS ,"Get misaligned deleg feature" ))return ; +if (env_or_skip ("MISALIGNED_EXC_DELEG_RESET" )) { + expected = (unsigned long )strtoul (getenv ("MISALIGNED_EXC_DELEG_RESET" ),NULL ,0 );
No need for the (unsigned long) cast. strtoul() returns an unsigned long (it even says it will in its name).
Quoted 34 lines
riscv/sbi-fwft.c +6
-8+fwft_check_reset (SBI_FWFT_MISALIGNED_EXC_DELEG , expected); + } + ret =fwft_misaligned_exc_set (2 ,0 );sbiret_report_error (&ret,SBI_ERR_INVALID_PARAM ,"Set misaligned deleg feature invalid value 2" );@@ -129,16 +159,10 @@ static void fwft_check_misaligned_exc_deleg(void)#endif /* Set to 0 and check after with get */ - ret =fwft_misaligned_exc_set (0 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 0" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,0 ,"Get misaligned deleg feature expected value 0" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,0 );/* Set to 1 and check after with get */ - ret =fwft_misaligned_exc_set (1 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 1" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,1 ,"Get misaligned deleg feature expected value 1" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 );install_exception_handler (EXC_LOAD_MISALIGNED , misaligned_handler);@@ -257,11 +281,20 @@ static void fwft_check_pte_ad_hw_updating(void) {struct sbiret ret;bool enabled; +unsigned long expected;report_prefix_push ("pte_ad_hw_updating" ); ret =fwft_get (SBI_FWFT_PTE_AD_HW_UPDATING );
riscv/sbi-fwft.c static void fwft_check_pte_ad_hw_updating(void) · line 297
Quoted 10 lines
riscv/sbi-fwft.c +9
-1-if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { +if (ret.error !=SBI_SUCCESS ) { +if (env_or_skip ("SBI_HAVE_FWFT_PTE_AD_HW_UPDATING" )) { + expected = (unsigned long )strtoul (getenv ("SBI_HAVE_FWFT_PTE_AD_HW_UPDATING" ),NULL ,0 ); +if (expected ==1 ) + { +report_fail ("not supported by platform" ); +return ; + } + }
same comments as above
riscv/sbi-fwft.c static void fwft_check_pte_ad_hw_updating(void) · line 305
Quoted 9 lines
riscv/sbi-fwft.c +1
-1report_skip ("not supported by platform" );return ; }else if (!sbiret_report_error (&ret,SBI_SUCCESS ,"get" )) {@@ -269,10 +302,9 @@ static void fwft_check_pte_ad_hw_updating(void)return ; } -report (ret.value ==0 || ret.value ==1 ,"first get value is 0/1" ); +fwft_check_reset (SBI_FWFT_PTE_AD_HW_UPDATING ,1 );
The reset value of PTE_AD_HW_UPDATING isn't 1. It's 0. See the spec.
riscv/sbi-fwft.c static void fwft_check_pte_ad_hw_updating(void) · line 275
Quoted 3 lines
riscv/sbi-fwft.c +0
-1enabled = ret.value; -report_kfail (true, !enabled,"resets to 0" );
This removes a test case that proved opensbi is broken. Always refer to the spec when writing tests. We don't want to write tests (and especially not change tests) just to output PASS.
Until we've fixed opensbi this test needs to stay as it is, i.e. with the check for 0 or 1 for the get and then the kfail report for when it's 1.
Quoted 6 lines
riscv/sbi-fwft.c +0
-0install_exception_handler (EXC_LOAD_PAGE_FAULT , adue_read_handler);install_exception_handler (EXC_STORE_PAGE_FAULT , adue_write_handler);Signature · 1 line
2.34.1
Thanks,
drew
RFC PATCH v2 1/1 riscv: Refactoring sbi fwft tests
In reply to Akshay BehlThis patch refactors the current sbi fwft tests
(pte_ad_hw_updating, misaligned_exc_deleg)
v2:
- Made env_or_skip and env_enabled methods shared by adding them to sbi-tests.h
- Used env_enabled check instead of env_or_skip for platform support
- Added the reset to 0/1 test back for pte_ad_hw_updating
- Made other suggested changes
--- riscv/sbi-tests.h | 22 ++++++++++++++++++++++ riscv/sbi-fwft.c | 38 +++++++++++++++++++++++++++----------- riscv/sbi.c | 17 ----------------- 3 files changed, 49 insertions(+), 28 deletions(-)
riscv/sbi-tests.h +22 -0
@@ -70,6 +70,28 @@#define sbiret_check (ret, expected_error, expected_value) \ sbiret_report(ret, expected_error, expected_value, "check sbi.error and sbi.value") +/** +* Check if environment variable exists, skip test if missing +* +* @param env The environment variable name to check +* @return true if environment variable exists, false otherwise +*/ +static inline bool env_or_skip (const char *env) +{ +if (!getenv (env)) { +report_skip ("missing %s environment variable" , env); +return false; + } +return true; +} + +static inline bool env_enabled (const char *env) +{ +char *s =getenv (env); + +return s && (*s =='1' || *s =='y' || *s =='Y' ); +} +void sbi_bad_fid (int ext);#endif /* __ASSEMBLER__ */
riscv/sbi-fwft.c +27 -11
@@ -66,6 +66,14 @@ static void fwft_check_reserved(unsigned long id)sbiret_report_error (&ret,SBI_ERR_DENIED ,"set reserved feature 0x%lx" , id); } +/* Must be called before any fwft_set() call is made for @feature */ +static void fwft_check_reset (uint32_t feature,unsigned long reset) +{ +struct sbiret ret =fwft_get (feature); + +sbiret_report (&ret,SBI_SUCCESS , reset,"resets to %lu" , reset); +} +static void fwft_check_base (void ) {report_prefix_push ("base" );
@@ -99,18 +107,28 @@ static struct sbiret fwft_misaligned_exc_get(void)static void fwft_check_misaligned_exc_deleg (void ) {struct sbiret ret; +unsigned long expected;report_prefix_push ("misaligned_exc_deleg" ); ret =fwft_misaligned_exc_get (); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { -report_skip ("SBI_FWFT_MISALIGNED_EXC_DELEG is not supported" ); +if (ret.error !=SBI_SUCCESS ) { +if (env_enabled ("SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG" )) { +sbiret_report_error (&ret,SBI_SUCCESS ,"supported" ); +return ; + } +report_skip ("not supported by platform" );return ; }if (!sbiret_report_error (&ret,SBI_SUCCESS ,"Get misaligned deleg feature" ))return ; +if (env_or_skip ("MISALIGNED_EXC_DELEG_RESET" )) { + expected =strtoul (getenv ("MISALIGNED_EXC_DELEG_RESET" ),NULL ,0 ); +fwft_check_reset (SBI_FWFT_MISALIGNED_EXC_DELEG , expected); + } + ret =fwft_misaligned_exc_set (2 ,0 );sbiret_report_error (&ret,SBI_ERR_INVALID_PARAM ,"Set misaligned deleg feature invalid value 2" );
@@ -129,16 +147,10 @@ static void fwft_check_misaligned_exc_deleg(void)#endif /* Set to 0 and check after with get */ - ret =fwft_misaligned_exc_set (0 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 0" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,0 ,"Get misaligned deleg feature expected value 0" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,0 );/* Set to 1 and check after with get */ - ret =fwft_misaligned_exc_set (1 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 1" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,1 ,"Get misaligned deleg feature expected value 1" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 );install_exception_handler (EXC_LOAD_MISALIGNED , misaligned_handler);
@@ -261,7 +273,11 @@ static void fwft_check_pte_ad_hw_updating(void)report_prefix_push ("pte_ad_hw_updating" ); ret =fwft_get (SBI_FWFT_PTE_AD_HW_UPDATING ); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { +if (ret.error !=SBI_SUCCESS ) { +if (env_enabled ("SBI_HAVE_FWFT_PTE_AD_HW_UPDATING" )) { +sbiret_report_error (&ret,SBI_SUCCESS ,"supported" ); +return ; + }report_skip ("not supported by platform" );return ; }else if (!sbiret_report_error (&ret,SBI_SUCCESS ,"get" )) {
riscv/sbi.c +0 -17
@@ -131,23 +131,6 @@ static phys_addr_t get_highest_addr(void)return highest_end -1 ; } -static bool env_enabled (const char *env) -{ -char *s =getenv (env); - -return s && (*s =='1' || *s =='y' || *s =='Y' ); -} - -static bool env_or_skip (const char *env) -{ -if (!getenv (env)) { -report_skip ("missing %s environment variable" , env); -return false; - } - -return true; -} -static bool get_invalid_addr (phys_addr_t *paddr,bool allow_default) {if (env_enabled ("INVALID_ADDR_AUTO" )) {
Signature · 1 line
2.34.1
Quoted 10 lines · Akshay Behl
This patch refactors the current sbi fwft tests
(pte_ad_hw_updating,misaligned_exc_deleg)v2:
- Madeenv_or_skipandenv_enabledmethods shared by adding them tosbi-tests.h
- Usedenv_enabledcheck instead ofenv_or_skipfor platform support
- Added the reset to 0/1 test back forpte_ad_hw_updating
- Made other suggested changes
The v2 changelog should go under the '---' below to keep it out of the file commit message.
Quoted 27 lines
Signed-off-by Akshay Behl <[email protected]>--- riscv/sbi-tests.h | 22 ++++++++++++++++++++++ riscv/sbi-fwft.c | 38 +++++++++++++++++++++++++++----------- riscv/sbi.c | 17 ----------------- 3 files changed, 49 insertions(+), 28 deletions(-)riscv/sbi-tests.h +11
-0@@ -70,6 +70,28 @@#define sbiret_check (ret, expected_error, expected_value) \ sbiret_report(ret, expected_error, expected_value, "check sbi.error and sbi.value") +/** +* Check if environment variable exists, skip test if missing +* +* @param env The environment variable name to check +* @return true if environment variable exists, false otherwise +*/ +static inline bool env_or_skip (const char *env) +{ +if (!getenv (env)) { +report_skip ("missing %s environment variable" , env); +return false;
riscv/sbi-tests.h line 93
Quoted 10 lines
riscv/sbi-tests.h +10
-0+ } +return true; +} + +static inline bool env_enabled (const char *env) +{ +char *s =getenv (env); + +return s && (*s =='1' || *s =='y' || *s =='Y' ); +}
We should include libcflat.h now that we've added these functions. Make sure the include is under the '#ifndef __ASSEMBLER__' (and above the '#include <asm/sbi.h>')
Quoted 117 lines
riscv/sbi-tests.h +1
-0+void sbi_bad_fid (int ext);#endif /* __ASSEMBLER__ */ riscv/sbi-fwft.c +27
-11@@ -66,6 +66,14 @@ static void fwft_check_reserved(unsigned long id)sbiret_report_error (&ret,SBI_ERR_DENIED ,"set reserved feature 0x%lx" , id); } +/* Must be called before any fwft_set() call is made for @feature */ +static void fwft_check_reset (uint32_t feature,unsigned long reset) +{ +struct sbiret ret =fwft_get (feature); + +sbiret_report (&ret,SBI_SUCCESS , reset,"resets to %lu" , reset); +} +static void fwft_check_base (void ) {report_prefix_push ("base" );@@ -99,18 +107,28 @@ static struct sbiret fwft_misaligned_exc_get(void)static void fwft_check_misaligned_exc_deleg (void ) {struct sbiret ret; +unsigned long expected;report_prefix_push ("misaligned_exc_deleg" ); ret =fwft_misaligned_exc_get (); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { -report_skip ("SBI_FWFT_MISALIGNED_EXC_DELEG is not supported" ); +if (ret.error !=SBI_SUCCESS ) { +if (env_enabled ("SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG" )) { +sbiret_report_error (&ret,SBI_SUCCESS ,"supported" ); +return ; + } +report_skip ("not supported by platform" );return ; }if (!sbiret_report_error (&ret,SBI_SUCCESS ,"Get misaligned deleg feature" ))return ; +if (env_or_skip ("MISALIGNED_EXC_DELEG_RESET" )) { + expected =strtoul (getenv ("MISALIGNED_EXC_DELEG_RESET" ),NULL ,0 ); +fwft_check_reset (SBI_FWFT_MISALIGNED_EXC_DELEG , expected); + } + ret =fwft_misaligned_exc_set (2 ,0 );sbiret_report_error (&ret,SBI_ERR_INVALID_PARAM ,"Set misaligned deleg feature invalid value 2" );@@ -129,16 +147,10 @@ static void fwft_check_misaligned_exc_deleg(void)#endif /* Set to 0 and check after with get */ - ret =fwft_misaligned_exc_set (0 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 0" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,0 ,"Get misaligned deleg feature expected value 0" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,0 );/* Set to 1 and check after with get */ - ret =fwft_misaligned_exc_set (1 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 1" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,1 ,"Get misaligned deleg feature expected value 1" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 );install_exception_handler (EXC_LOAD_MISALIGNED , misaligned_handler);@@ -261,7 +273,11 @@ static void fwft_check_pte_ad_hw_updating(void)report_prefix_push ("pte_ad_hw_updating" ); ret =fwft_get (SBI_FWFT_PTE_AD_HW_UPDATING ); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { +if (ret.error !=SBI_SUCCESS ) { +if (env_enabled ("SBI_HAVE_FWFT_PTE_AD_HW_UPDATING" )) { +sbiret_report_error (&ret,SBI_SUCCESS ,"supported" ); +return ; + }report_skip ("not supported by platform" );return ; }else if (!sbiret_report_error (&ret,SBI_SUCCESS ,"get" )) {riscv/sbi.c +0
-17@@ -131,23 +131,6 @@ static phys_addr_t get_highest_addr(void)return highest_end -1 ; } -static bool env_enabled (const char *env) -{ -char *s =getenv (env); - -return s && (*s =='1' || *s =='y' || *s =='Y' ); -} - -static bool env_or_skip (const char *env) -{ -if (!getenv (env)) { -report_skip ("missing %s environment variable" , env); -return false; - } - -return true; -} -static bool get_invalid_addr (phys_addr_t *paddr,bool allow_default) {if (env_enabled ("INVALID_ADDR_AUTO" )) {Signature · 1 line
2.34.1
Other than the two comments above, it looks good. I've made the changes myself while applying to riscv/sbi
https://gitlab.com/jones-drew/kvm-unit-tests/-/commits/riscv/sbi
Thanks,
drew
Quoted 31 lines · Andrew Jones
Quoted 10 lines · Akshay Behl
This patch refactors the current sbi fwft tests
(pte_ad_hw_updating,misaligned_exc_deleg)v2:
- Madeenv_or_skipandenv_enabledmethods shared by adding them tosbi-tests.h
- Usedenv_enabledcheck instead ofenv_or_skipfor platform support
- Added the reset to 0/1 test back forpte_ad_hw_updating
- Made other suggested changesThe v2 changelog should go under the '---' below to keep it out of the file commit message.
Quoted 16 lines
Signed-off-by Akshay Behl <[email protected]>--- riscv/sbi-tests.h | 22 ++++++++++++++++++++++ riscv/sbi-fwft.c | 38 +++++++++++++++++++++++++++----------- riscv/sbi.c | 17 ----------------- 3 files changed, 49 insertions(+), 28 deletions(-)riscv/sbi-tests.h +0
-0@@ -70,6 +70,28 @@#define sbiret_check (ret, expected_error, expected_value) \ sbiret_report(ret, expected_error, expected_value, "check sbi.error and sbi.value")
Quoted 6 lines
riscv/sbi-tests.h line 78
Quoted 6 lines
riscv/sbi-tests.h +6
-0+/** +* Check if environment variable exists, skip test if missing +* +* @param env The environment variable name to check +* @return true if environment variable exists, false otherwise +*/
I also dropped this comment block. The '/**' made check-kerneldoc complain and the comment didn't tell us anything that the four lines of code that the function has was already easily telling us.
Thanks,
drew
Quoted 145 lines
Quoted 5 lines
riscv/sbi-tests.h +5
-0+static inline bool env_or_skip (const char *env) +{ +if (!getenv (env)) { +report_skip ("missing %s environment variable" , env); +return false;riscv/sbi-tests.h line 93
Quoted 10 lines
riscv/sbi-tests.h +10
-0+ } +return true; +} + +static inline bool env_enabled (const char *env) +{ +char *s =getenv (env); + +return s && (*s =='1' || *s =='y' || *s =='Y' ); +}We should include
libcflat.hnow that we've added these functions. Make sure the include is under the '#ifndef__ASSEMBLER__' (and above the '#include <asm/sbi.h>')Quoted 117 lines
riscv/sbi-tests.h +1
-0+void sbi_bad_fid (int ext);#endif /* __ASSEMBLER__ */ riscv/sbi-fwft.c +27
-11@@ -66,6 +66,14 @@ static void fwft_check_reserved(unsigned long id)sbiret_report_error (&ret,SBI_ERR_DENIED ,"set reserved feature 0x%lx" , id); } +/* Must be called before any fwft_set() call is made for @feature */ +static void fwft_check_reset (uint32_t feature,unsigned long reset) +{ +struct sbiret ret =fwft_get (feature); + +sbiret_report (&ret,SBI_SUCCESS , reset,"resets to %lu" , reset); +} +static void fwft_check_base (void ) {report_prefix_push ("base" );@@ -99,18 +107,28 @@ static struct sbiret fwft_misaligned_exc_get(void)static void fwft_check_misaligned_exc_deleg (void ) {struct sbiret ret; +unsigned long expected;report_prefix_push ("misaligned_exc_deleg" ); ret =fwft_misaligned_exc_get (); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { -report_skip ("SBI_FWFT_MISALIGNED_EXC_DELEG is not supported" ); +if (ret.error !=SBI_SUCCESS ) { +if (env_enabled ("SBI_HAVE_FWFT_MISALIGNED_EXC_DELEG" )) { +sbiret_report_error (&ret,SBI_SUCCESS ,"supported" ); +return ; + } +report_skip ("not supported by platform" );return ; }if (!sbiret_report_error (&ret,SBI_SUCCESS ,"Get misaligned deleg feature" ))return ; +if (env_or_skip ("MISALIGNED_EXC_DELEG_RESET" )) { + expected =strtoul (getenv ("MISALIGNED_EXC_DELEG_RESET" ),NULL ,0 ); +fwft_check_reset (SBI_FWFT_MISALIGNED_EXC_DELEG , expected); + } + ret =fwft_misaligned_exc_set (2 ,0 );sbiret_report_error (&ret,SBI_ERR_INVALID_PARAM ,"Set misaligned deleg feature invalid value 2" );@@ -129,16 +147,10 @@ static void fwft_check_misaligned_exc_deleg(void)#endif /* Set to 0 and check after with get */ - ret =fwft_misaligned_exc_set (0 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 0" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,0 ,"Get misaligned deleg feature expected value 0" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,0 );/* Set to 1 and check after with get */ - ret =fwft_misaligned_exc_set (1 ,0 ); -sbiret_report_error (&ret,SBI_SUCCESS ,"Set misaligned deleg feature value 1" ); - ret =fwft_misaligned_exc_get (); -sbiret_report (&ret,SBI_SUCCESS ,1 ,"Get misaligned deleg feature expected value 1" ); +fwft_set_and_check_raw ("" ,SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 );install_exception_handler (EXC_LOAD_MISALIGNED , misaligned_handler);@@ -261,7 +273,11 @@ static void fwft_check_pte_ad_hw_updating(void)report_prefix_push ("pte_ad_hw_updating" ); ret =fwft_get (SBI_FWFT_PTE_AD_HW_UPDATING ); -if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { +if (ret.error !=SBI_SUCCESS ) { +if (env_enabled ("SBI_HAVE_FWFT_PTE_AD_HW_UPDATING" )) { +sbiret_report_error (&ret,SBI_SUCCESS ,"supported" ); +return ; + }report_skip ("not supported by platform" );return ; }else if (!sbiret_report_error (&ret,SBI_SUCCESS ,"get" )) {riscv/sbi.c +0
-17@@ -131,23 +131,6 @@ static phys_addr_t get_highest_addr(void)return highest_end -1 ; } -static bool env_enabled (const char *env) -{ -char *s =getenv (env); - -return s && (*s =='1' || *s =='y' || *s =='Y' ); -} - -static bool env_or_skip (const char *env) -{ -if (!getenv (env)) { -report_skip ("missing %s environment variable" , env); -return false; - } - -return true; -} -static bool get_invalid_addr (phys_addr_t *paddr,bool allow_default) {if (env_enabled ("INVALID_ADDR_AUTO" )) {Signature · 1 line
2.34.1Other than the two comments above, it looks good. I've made the changes myself while applying to riscv/sbi
https://gitlab.com/jones-drew/kvm-unit-tests/-/commits/riscv/sbi
Thanks,
drew
Quoted 11 lines · Akshay Behl
This patch refactors the current sbi fwft tests
(pte_ad_hw_updating,misaligned_exc_deleg)v2:
- Madeenv_or_skipandenv_enabledmethods shared by adding them tosbi-tests.h
- Usedenv_enabledcheck instead ofenv_or_skipfor platform support
- Added the reset to 0/1 test back forpte_ad_hw_updating
- Made other suggested changes
Quoted 6 lines
Signed-off-by Akshay Behl <[email protected]>--- riscv/sbi-tests.h | 22 ++++++++++++++++++++++ riscv/sbi-fwft.c | 38 +++++++++++++++++++++++++++----------- riscv/sbi.c | 17 ----------------- 3 files changed, 49 insertions(+), 28 deletions(-)
Merged.
Thanks,
drew