Skip to contentSkip to conversation

wifi: mwifiex: Fix HT40 bandwidth issue.

PATCH In review Jeff Chen 2 participants 2 messages Mar 14, 2025 Marvell mwifiex wireless driver

lore
Share & tools
lore

Jeff Chen

author
#0 lore raw

PATCH v3 1/1 wifi: mwifiex: Fix HT40 bandwidth issue.

This patch addresses an issue where, despite the AP supporting 40MHz bandwidth, the connection was limited to 20MHz. Without this fix, even if the access point supports 40MHz, the bandwidth after connection remains at 20MHz. This issue is not a regression.

---
 drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/wireless/marvell/mwifiex/11n.c +4 -2
index 66f0f5377ac1..738bafc3749b 100644
@@ -403,12 +403,14 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
 
 		if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
 		    bss_desc->bcn_ht_oper->ht_param &
-		    IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)
+		    IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) {
+			chan_list->chan_scan_param[0].radio_type |=
+				CHAN_BW_40MHZ << 2;
 			SET_SECONDARYCHAN(chan_list->chan_scan_param[0].
 					  radio_type,
 					  (bss_desc->bcn_ht_oper->ht_param &
 					  IEEE80211_HT_PARAM_CHA_SEC_OFFSET));
-
+		}
 		*buffer += struct_size(chan_list, chan_scan_param, 1);
 		ret_len += struct_size(chan_list, chan_scan_param, 1);
 	}

base-commit: 54be64fdf3ba6dbad2f5c48e466e1db43ad74bca

Signature · 1 line
2.34.1
reviewer Reviewed-by on v3 1/1
#1 lore raw

Hello Jeff,
for future patches, please be sure to have a changelog after the --- at the end of the commit message.

See
https://www.kernel.org/doc/html/latest/process/submitting-patches.html#commentary

and in general that whole document.

Quoted 6 lines · Jeff Chen

This patch addresses an issue where, despite the AP supporting 40MHz bandwidth, the connection was limited to 20MHz. Without this fix, even if the access point supports 40MHz, the bandwidth after connection remains at 20MHz. This issue is not a regression.

Francesco