Skip to contentSkip to conversation

Add support for sam9x7 SoC and SAM9X75 Curiosity board

PATCH Superseded Manikandan Muralidharan 2 participants 10 messages Mar 17, 2025 – Mar 18, 2025

Subsystems (5)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add support for sam9x7 SoC and SAM9X75 Curiosity board

This patch series adds support for the new SoC family - sam9x7.
- sam9x7 SoC is added
- Clock driver for sam9x7 is added
- Target board SAM9X75 Curiosity is added with its differences in DT and MMC config support

----
changes in v4:
- 1/8 - Drop the local include file clock/at91.h and the update the MAINTAINERS respectively.

changes in v3:
- 1/8 - rename at91.h to at91-pmc-status.h, update the SoC DTs and MAINTAINERS file respectively
- 4/8 - update header from clk/at91.h to clock/at91.h

changes in v2:
- 1/8 - add additional PMC clock definition to support the sam9x7 upstream DT
- 6/8 - Remove support for SoC DT and board DTS as they are already available in dts/upstream
- add the differences in DT files between upstream Linux DT and U-Boot DT to at91-sam9x75_curiosity-u-boot.dtsi
- 7/8 - Add OF_UPSTREAM support for sam9x75 curiosity board
- 8/8 - update the DEFAULT_DEVICE_TREE config to <vendor/name>

----

Manikandan Muralidharan (4):
dt-bindings: drop at91.h from clock includes
ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity
board
board: sam9x75_curiosity: Add support for sam9x75 curiosity
configs: sam9x75_curiosity: Add initial mmc default config

Varshini Rajendran (4):
clk: at91: sam9x60-pll: add support for core clock frequency inputs
clk: at91: sam9x60-pll: add support for HW PLL freq dividers
clk: at91: sam9x7: add pmc driver for sam9x7 SoC family
ARM: at91: Add sam9x7 soc

 MAINTAINERS                                   |    1 -
 .../dts/at91-sam9x75_curiosity-u-boot.dtsi    |  107 ++
 arch/arm/mach-at91/Kconfig                    |   12 +
 arch/arm/mach-at91/arm926ejs/Makefile         |    1 +
 arch/arm/mach-at91/arm926ejs/sam9x7_devices.c |   49 +
 arch/arm/mach-at91/include/mach/hardware.h    |    2 +
 arch/arm/mach-at91/include/mach/sam9x7.h      |  172 +++
 board/atmel/sam9x75_curiosity/Kconfig         |   15 +
 board/atmel/sam9x75_curiosity/MAINTAINERS     |    7 +
 board/atmel/sam9x75_curiosity/Makefile        |    7 +
 .../sam9x75_curiosity/sam9x75_curiosity.c     |   66 +
 configs/sam9x75_curiosity_mmc_defconfig       |   73 ++
 drivers/clk/at91/Makefile                     |    1 +
 drivers/clk/at91/clk-sam9x60-pll.c            |   55 +-
 drivers/clk/at91/pmc.h                        |    2 +
 drivers/clk/at91/sam9x60.c                    |    7 +
 drivers/clk/at91/sam9x7.c                     | 1094 +++++++++++++++++
 drivers/clk/at91/sama7g5.c                    |    6 +
 include/configs/sam9x75_curiosity.h           |   23 +
 include/dt-bindings/clock/at91.h              |   23 -
 20 files changed, 1689 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm/dts/at91-sam9x75_curiosity-u-boot.dtsi
 create mode 100644 arch/arm/mach-at91/arm926ejs/sam9x7_devices.c
 create mode 100644 arch/arm/mach-at91/include/mach/sam9x7.h
 create mode 100644 board/atmel/sam9x75_curiosity/Kconfig
 create mode 100644 board/atmel/sam9x75_curiosity/MAINTAINERS
 create mode 100644 board/atmel/sam9x75_curiosity/Makefile
 create mode 100644 board/atmel/sam9x75_curiosity/sam9x75_curiosity.c
 create mode 100644 configs/sam9x75_curiosity_mmc_defconfig
 create mode 100644 drivers/clk/at91/sam9x7.c
 create mode 100644 include/configs/sam9x75_curiosity.h
 delete mode 100644 include/dt-bindings/clock/at91.h
Signature · 1 line
2.25.1
#1 lore raw

PATCH v4 1/8 dt-bindings: drop at91.h from clock includes

Remove clock/at91.h file as it is subset of dts/upstream/include/dt-bindings/clock/at91.h.
The constants defined in this header are being used only in dts

---
 MAINTAINERS                      |  1 -
 include/dt-bindings/clock/at91.h | 23 -----------------------
 2 files changed, 24 deletions(-)
 delete mode 100644 include/dt-bindings/clock/at91.h
MAINTAINERS +0 -1
index 10f7f1fd180..9322bc542e9 100644
@@ -464,7 +464,6 @@ F:	drivers/memory/atmel-ebi.c
 F:	drivers/misc/microchip_flexcom.c
 F:	drivers/timer/atmel_tcb_timer.c
 F:	include/dt-bindings/clk/at91.h
-F:	include/dt-bindings/clock/at91.h
 F:	include/dt-bindings/dma/at91.h
 F:	include/dt-bindings/mfd/at91-usart.h
 F:	include/dt-bindings/mfd/atmel-flexcom.h
include/dt-bindings/clock/at91.h deleted +0 -23
deleted file mode 100644
index ab3ee241d10..00000000000
@@ -1,23 +0,0 @@
-/*
- * This header provides constants for AT91 pmc status.
- *
- * The constants defined in this header are being used in dts.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef _DT_BINDINGS_CLK_AT91_H
-#define _DT_BINDINGS_CLK_AT91_H
-
-#define AT91_PMC_MOSCS		0		/* MOSCS Flag */
-#define AT91_PMC_LOCKA		1		/* PLLA Lock */
-#define AT91_PMC_LOCKB		2		/* PLLB Lock */
-#define AT91_PMC_MCKRDY		3		/* Master Clock */
-#define AT91_PMC_LOCKU		6		/* UPLL Lock */
-#define AT91_PMC_PCKRDY(id)	(8 + (id))	/* Programmable Clock */
-#define AT91_PMC_MOSCSELS	16		/* Main Oscillator Selection */
-#define AT91_PMC_MOSCRCS	17		/* Main On-Chip RC */
-#define AT91_PMC_CFDEV		18		/* Clock Failure Detector Event */
-#define AT91_PMC_GCKRDY		24		/* Generated Clocks */
-
-#endif
Signature · 1 line
2.25.1
#2 lore raw

PATCH v4 2/8 clk: at91: sam9x60-pll: add support for core clock frequency inputs

In reply to Manikandan Muralidharan

From: Varshini Rajendran <[email protected]>

Add support for different core clock frequency input ranges for different PLL IDs in the PLL driver and align sam9x60, sama7g5 SOC platforms.

---
 drivers/clk/at91/clk-sam9x60-pll.c | 17 ++++++++---------
 drivers/clk/at91/pmc.h             |  1 +
 drivers/clk/at91/sam9x60.c         |  7 +++++++
 drivers/clk/at91/sama7g5.c         |  6 ++++++
 4 files changed, 22 insertions(+), 9 deletions(-)
drivers/clk/at91/clk-sam9x60-pll.c +8 -9
index a30035eb8ce..676ad8294a6 100644
@@ -31,9 +31,6 @@
 #define UPLL_DIV		2
 #define PLL_MUL_MAX		(FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1)
 
-#define FCORE_MIN		(600000000)
-#define FCORE_MAX		(1200000000)
-
 #define PLL_MAX_ID		7
 
 struct sam9x60_pll {
@@ -55,14 +52,15 @@ static inline bool sam9x60_pll_ready(void __iomem *base, int id)
 	return !!(status & BIT(id));
 }
 
-static long sam9x60_frac_pll_compute_mul_frac(u32 *mul, u32 *frac, ulong rate,
+static long sam9x60_frac_pll_compute_mul_frac(const struct clk_range *core_clk,
+					      u32 *mul, u32 *frac, ulong rate,
 					      ulong parent_rate)
 {
 	unsigned long tmprate, remainder;
 	unsigned long nmul = 0;
 	unsigned long nfrac = 0;
 
-	if (rate < FCORE_MIN || rate > FCORE_MAX)
+	if (rate < core_clk->min || rate > core_clk->max)
 		return -ERANGE;
 
 	/*
@@ -82,7 +80,7 @@ static long sam9x60_frac_pll_compute_mul_frac(u32 *mul, u32 *frac, ulong rate,
 	}
 
 	/* Check if resulted rate is valid.  */
-	if (tmprate < FCORE_MIN || tmprate > FCORE_MAX)
+	if (tmprate < core_clk[0].min || tmprate > core_clk[0].max)
 		return -ERANGE;
 
 	*mul = nmul - 1;
@@ -103,8 +101,8 @@ static ulong sam9x60_frac_pll_set_rate(struct clk *clk, ulong rate)
 	if (!parent_rate)
 		return 0;
 
-	ret = sam9x60_frac_pll_compute_mul_frac(&nmul, &nfrac, rate,
-						parent_rate);
+	ret = sam9x60_frac_pll_compute_mul_frac(pll->characteristics->core_output,
+						&nmul, &nfrac, rate, parent_rate);
 	if (ret < 0)
 		return 0;
 
@@ -163,7 +161,8 @@ static int sam9x60_frac_pll_enable(struct clk *clk)
 	ulong crate;
 
 	crate = sam9x60_frac_pll_get_rate(clk);
-	if (crate < FCORE_MIN || crate > FCORE_MAX)
+	if (crate < pll->characteristics->core_output[0].min ||
+	    crate > pll->characteristics->core_output[0].max)
 		return -ERANGE;
 
 	pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK,
drivers/clk/at91/pmc.h +1 -0
index ff464522aa0..49134531564 100644
@@ -38,6 +38,7 @@ struct clk_pll_characteristics {
 	struct clk_range input;
 	int num_output;
 	const struct clk_range *output;
+	const struct clk_range *core_output;
 	u16 *icpll;
 	u8 *out;
 	u8 upll : 1;
drivers/clk/at91/sam9x60.c +7 -0
index b7d64bdbb3d..e04266a2be2 100644
@@ -112,17 +112,24 @@ static const struct clk_range upll_outputs[] = {
 	{ .min = 300000000, .max = 500000000 },
 };
 
+/* Fractional PLL core output range. */
+static const struct clk_range core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
 /* PLL characteristics. */
 static const struct clk_pll_characteristics apll_characteristics = {
 	.input = { .min = 12000000, .max = 48000000 },
 	.num_output = ARRAY_SIZE(plla_outputs),
 	.output = plla_outputs,
+	.core_output = core_outputs,
 };
 
 static const struct clk_pll_characteristics upll_characteristics = {
 	.input = { .min = 12000000, .max = 48000000 },
 	.num_output = ARRAY_SIZE(upll_outputs),
 	.output = upll_outputs,
+	.core_output = core_outputs,
 	.upll = true,
 };
 
drivers/clk/at91/sama7g5.c +6 -0
index 63b2c647467..c0e27828b1a 100644
@@ -158,11 +158,17 @@ static const struct clk_range pll_outputs[] = {
 	{ .min = 2343750, .max = 1200000000 },
 };
 
+/* Fractional PLL core output range. */
+static const struct clk_range core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
 /* PLL characteristics. */
 static const struct clk_pll_characteristics pll_characteristics = {
 	.input = { .min = 12000000, .max = 50000000 },
 	.num_output = ARRAY_SIZE(pll_outputs),
 	.output = pll_outputs,
+	.core_output = core_outputs,
 };
 
 /* Layout for fractional PLLs. */
Signature · 1 line
2.25.1
#3 lore raw

PATCH v4 3/8 clk: at91: sam9x60-pll: add support for HW PLL freq dividers

In reply to Manikandan Muralidharan

From: Varshini Rajendran <[email protected]>

Add support for hardware dividers for PLL IDs.In sam9x7 SoC, PLL_ID_PLLA and PLL_ID_PLLA_DIV2 has /2 hardware dividers each.

fcorepllack -----> HW Div = 2 -+--> fpllack

                               |
                               +--> HW Div = 2 ---> fplladiv2ck
---
 drivers/clk/at91/clk-sam9x60-pll.c | 38 +++++++++++++++++++++++++++++-
 drivers/clk/at91/pmc.h             |  1 +
 2 files changed, 38 insertions(+), 1 deletion(-)
drivers/clk/at91/clk-sam9x60-pll.c +37 -1
index 676ad8294a6..df8172bccac 100644
@@ -22,6 +22,7 @@
 
 #define UBOOT_DM_CLK_AT91_SAM9X60_DIV_PLL	"at91-sam9x60-div-pll-clk"
 #define UBOOT_DM_CLK_AT91_SAM9X60_FRAC_PLL	"at91-sam9x60-frac-pll-clk"
+#define UBOOT_DM_CLK_AT91_SAM9X60_FIXED_DIV_PLL	"at91-sam9x60-fixed-div-pll-clk"
 
 #define	PMC_PLL_CTRL0_DIV_MSK	GENMASK(7, 0)
 #define	PMC_PLL_CTRL1_MUL_MSK	GENMASK(31, 24)
@@ -140,6 +141,7 @@ static ulong sam9x60_frac_pll_get_rate(struct clk *clk)
 	void __iomem *base = pll->base;
 	ulong parent_rate = clk_get_parent_rate(clk);
 	u32 mul, frac, val;
+	ulong pll_rate;
 
 	if (!parent_rate)
 		return 0;
@@ -149,8 +151,12 @@ static ulong sam9x60_frac_pll_get_rate(struct clk *clk)
 	pmc_read(base, AT91_PMC_PLL_CTRL1, &val);
 	mul = (val & pll->layout->mul_mask) >> pll->layout->mul_shift;
 	frac = (val & pll->layout->frac_mask) >> pll->layout->frac_shift;
+	pll_rate = (parent_rate * (mul + 1) + ((u64)parent_rate * frac >> 22));
 
-	return (parent_rate * (mul + 1) + ((u64)parent_rate * frac >> 22));
+	if (pll->layout->div2)
+		pll_rate >>= 1;
+
+	return pll_rate;
 }
 
 static int sam9x60_frac_pll_enable(struct clk *clk)
@@ -359,6 +365,16 @@ static ulong sam9x60_div_pll_get_rate(struct clk *clk)
 	return parent_rate / (div + 1);
 }
 
+static ulong sam9x60_fixed_div_pll_get_rate(struct clk *clk)
+{
+	ulong parent_rate = clk_get_parent_rate(clk);
+
+	if (!parent_rate)
+		return 0;
+
+	return parent_rate >> 1;
+}
+
 static const struct clk_ops sam9x60_div_pll_ops = {
 	.enable = sam9x60_div_pll_enable,
 	.disable = sam9x60_div_pll_disable,
@@ -366,6 +382,12 @@ static const struct clk_ops sam9x60_div_pll_ops = {
 	.get_rate = sam9x60_div_pll_get_rate,
 };
 
+static const struct clk_ops sam9x60_fixed_div_pll_ops = {
+	.enable = sam9x60_div_pll_enable,
+	.disable = sam9x60_div_pll_disable,
+	.get_rate = sam9x60_fixed_div_pll_get_rate,
+};
+
 static struct clk *
 sam9x60_clk_register_pll(void __iomem *base, const char *type,
 			 const char *name, const char *parent_name, u8 id,
@@ -406,6 +428,13 @@ sam9x60_clk_register_div_pll(void __iomem *base, const char *name,
 			     const struct clk_pll_characteristics *characteristics,
 			     const struct clk_pll_layout *layout, bool critical)
 {
+	if (layout->div2) {
+		return sam9x60_clk_register_pll(base,
+			UBOOT_DM_CLK_AT91_SAM9X60_FIXED_DIV_PLL, name, parent_name,
+			id, characteristics, layout,
+			CLK_GET_RATE_NOCACHE | (critical ? CLK_IS_CRITICAL : 0));
+	}
+
 	return sam9x60_clk_register_pll(base,
 		UBOOT_DM_CLK_AT91_SAM9X60_DIV_PLL, name, parent_name, id,
 		characteristics, layout,
@@ -431,6 +460,13 @@ U_BOOT_DRIVER(at91_sam9x60_div_pll_clk) = {
 	.flags = DM_FLAG_PRE_RELOC,
 };
 
+U_BOOT_DRIVER(at91_sam9x60_fixed_div_pll_clk) = {
+	.name = UBOOT_DM_CLK_AT91_SAM9X60_FIXED_DIV_PLL,
+	.id = UCLASS_CLK,
+	.ops = &sam9x60_fixed_div_pll_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
+
 U_BOOT_DRIVER(at91_sam9x60_frac_pll_clk) = {
 	.name = UBOOT_DM_CLK_AT91_SAM9X60_FRAC_PLL,
 	.id = UCLASS_CLK,
drivers/clk/at91/pmc.h +1 -0
index 49134531564..580c9964ff4 100644
@@ -54,6 +54,7 @@ struct clk_pll_layout {
 	u8 frac_shift;
 	u8 div_shift;
 	u8 endiv_shift;
+	u8 div2;
 };
 
 struct clk_programmable_layout {
Signature · 1 line
2.25.1
#4 lore raw

PATCH v4 4/8 clk: at91: sam9x7: add pmc driver for sam9x7 SoC family

In reply to Manikandan Muralidharan

From: Varshini Rajendran <[email protected]>

Add PMC driver support for sam9x7 SoC family

---
 drivers/clk/at91/Makefile |    1 +
 drivers/clk/at91/sam9x7.c | 1094 +++++++++++++++++++++++++++++++++++++
 2 files changed, 1095 insertions(+)
 create mode 100644 drivers/clk/at91/sam9x7.c
drivers/clk/at91/Makefile +1 -0
index e53dcb4ca7a..6cca861f81c 100644
@@ -12,6 +12,7 @@ obj-$(CONFIG_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
 obj-$(CONFIG_AT91_SAM9X60_USB)	+= clk-sam9x60-usb.o
 obj-$(CONFIG_SAMA7G5)		+= sama7g5.o
 obj-$(CONFIG_SAM9X60)		+= sam9x60.o
+obj-$(CONFIG_SAM9X7)		+= sam9x7.o
 else
 obj-y += compat.o
 endif
drivers/clk/at91/sam9x7.c new file +1094 -0

1,094 lines not on this page · raw message

Signature · 1 line
2.25.1
#5 lore raw

Re: [PATCH v4 4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family

Quoted 887 lines · Manikandan Muralidharan

From: Varshini Rajendran <[email protected]>

Add PMC driver support for sam9x7 SoC family

---
 drivers/clk/at91/Makefile |    1 +
 drivers/clk/at91/sam9x7.c | 1094 +++++++++++++++++++++++++++++++++++++
 2 files changed, 1095 insertions(+)
 create mode 100644 drivers/clk/at91/sam9x7.c
drivers/clk/at91/Makefile +1 -0
index e53dcb4ca7a..6cca861f81c 100644
@@ -12,6 +12,7 @@ obj-$(CONFIG_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
 obj-$(CONFIG_AT91_SAM9X60_USB)	+= clk-sam9x60-usb.o
 obj-$(CONFIG_SAMA7G5)		+= sama7g5.o
 obj-$(CONFIG_SAM9X60)		+= sam9x60.o
+obj-$(CONFIG_SAM9X7)		+= sam9x7.o
 else
 obj-y += compat.o
 endif
drivers/clk/at91/sam9x7.c new file +856 -0
new file mode 100644
index 00000000000..b362d2f9858
@@ -0,0 +1,1094 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2025 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <[email protected]>
+ *
+ */
+
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dt-bindings/clock/at91.h>
+#include <linux/clk-provider.h>
+
+#include "pmc.h"
+
+/**
+ * Clock identifiers to be used in conjunction with macros like
+ * AT91_TO_CLK_ID()
+ *
+ * @ID_MD_SLCK:			TD slow clock identifier
+ * @ID_TD_SLCK:			MD slow clock identifier
+ * @ID_MAIN_XTAL:		Main Xtal clock identifier
+ * @ID_MAIN_RC:			Main RC clock identifier
+ * @ID_MAIN_RC_OSC:		Main RC Oscillator clock identifier
+ * @ID_MAIN_OSC:		Main Oscillator clock identifier
+ * @ID_MAINCK:			MAINCK clock identifier
+ * @ID_PLL_U_FRAC:		UPLL fractional clock identifier
+ * @ID_PLL_U_DIV:		UPLL divider clock identifier
+ * @ID_PLL_A_FRAC:		APLL fractional clock identifier
+ * @ID_PLL_A_DIV:		APLL divider clock identifier
+ * @ID_PLL_A_2_DIV:		PLLA DIV2 divider clock identifier
+ * @ID_PLL_AUDIO_FRAC:		Audio PLL fractional clock identifier
+ * @ID_PLL_AUDIO_DIVPMC:	Audio PLL divider clock identifier
+ * @ID_PLL_AUDIO_DIVIO:		Audio PLL IO divider clock identifier
+ * @ID_PLL_LVDS_FRAC:		LVDS PLL fractional clock identifier
+ * @ID_PLL_LVDS_DIV:		LVDS PLL divider clock identifier
+
+ * @ID_MCK_DIV:			MCK DIV clock identifier
+
+ * @ID_UTMI:			UTMI clock identifier
+
+ * @ID_PROG0:			Programmable 0 clock identifier
+ * @ID_PROG1:			Programmable 1 clock identifier
+
+ * @ID_PCK0:			PCK0 system clock identifier
+ * @ID_PCK1:			PCK1 system clock identifier
+ * @ID_DDR:			DDR system clock identifier
+ * @ID_QSPI:			QSPI system clock identifier
+ *
+ * @ID_MCK_PRES:		MCK PRES clock identifier
+ *
+ * Note: if changing the values of this enums please sync them with
+ *	 device tree
+ */
+enum pmc_clk_ids {
+	ID_MD_SLCK		= 0,
+	ID_TD_SLCK		= 1,
+	ID_MAIN_XTAL		= 2,
+	ID_MAIN_RC		= 3,
+	ID_MAIN_RC_OSC		= 4,
+	ID_MAIN_OSC		= 5,
+	ID_MAINCK		= 6,
+
+	ID_PLL_U_FRAC		= 7,
+	ID_PLL_U_DIV		= 8,
+	ID_PLL_A_FRAC		= 9,
+	ID_PLL_A_DIV		= 10,
+	ID_PLL_A_2_DIV		= 11,
+	ID_PLL_AUDIO_FRAC	= 12,
+	ID_PLL_AUDIO_DIVPMC	= 13,
+	ID_PLL_AUDIO_DIVIO	= 14,
+	ID_PLL_LVDS_FRAC	= 15,
+	ID_PLL_LVDS_DIV		= 16,
+
+	ID_MCK_DIV		= 17,
+
+	ID_UTMI			= 18,
+
+	ID_PROG0		= 19,
+	ID_PROG1		= 20,
+
+	ID_PCK0			= 21,
+	ID_PCK1			= 22,
+
+	ID_DDR			= 23,
+	ID_QSPI			= 24,
+
+	ID_MCK_PRES		= 25,
+
+	ID_MAX,
+};
+
+/**
+ * PLL type identifiers
+ * @PLL_TYPE_FRAC:	fractional PLL identifier
+ * @PLL_TYPE_DIV:	divider PLL identifier
+ */
+enum pll_type {
+	PLL_TYPE_FRAC,
+	PLL_TYPE_DIV,
+};
+
+/* Clock names used as parents for multiple clocks. */
+static const char *clk_names[] = {
+	[ID_MAIN_RC_OSC]	= "main_rc_osc",
+	[ID_MAIN_OSC]		= "main_osc",
+	[ID_MAINCK]		= "mainck",
+	[ID_PLL_U_DIV]		= "upll_divpmcck",
+	[ID_PLL_A_DIV]		= "plla_divpmcck",
+	[ID_PLL_A_2_DIV]	= "plla_div2pmcck",
+	[ID_PLL_AUDIO_DIVPMC]	= "pll_audio_divpmcck",
+	[ID_PLL_AUDIO_DIVIO]	= "pll_audio_diviock",
+	[ID_PLL_LVDS_DIV]	= "pll_lvds_divpmcck",
+	[ID_MCK_PRES]		= "mck_pres",
+	[ID_MCK_DIV]		= "mck_div",
+};
+
+/* Fractional PLL core output range. */
+static const struct clk_range plla_core_outputs[] = {
+	{ .min = 800000000, .max = 1600000000 },
+};
+
+static const struct clk_range upll_core_outputs[] = {
+	{ .min = 600000000, .max = 960000000 },
+};
+
+static const struct clk_range lvdspll_core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
+static const struct clk_range audiopll_core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
+static const struct clk_range plladiv2_core_outputs[] = {
+	{ .min = 800000000, .max = 1600000000 },
+};
+
+/* Fractional PLL output range. */
+static const struct clk_range plla_outputs[] = {
+	{ .min = 400000000, .max = 800000000 },
+};
+
+static const struct clk_range upll_outputs[] = {
+	{ .min = 300000000, .max = 480000000 },
+};
+
+static const struct clk_range lvdspll_outputs[] = {
+	{ .min = 175000000, .max = 550000000 },
+};
+
+static const struct clk_range audiopll_outputs[] = {
+	{ .min = 0, .max = 300000000 },
+};
+
+static const struct clk_range plladiv2_outputs[] = {
+	{ .min = 200000000, .max = 400000000 },
+};
+
+/* PLL characteristics. */
+static const struct clk_pll_characteristics plla_characteristics = {
+	.input = { .min = 20000000, .max = 50000000 },
+	.num_output = ARRAY_SIZE(plla_outputs),
+	.output = plla_outputs,
+	.core_output = plla_core_outputs,
+};
+
+static const struct clk_pll_characteristics upll_characteristics = {
+	.input = { .min = 20000000, .max = 50000000 },
+	.num_output = ARRAY_SIZE(upll_outputs),
+	.output = upll_outputs,
+	.core_output = upll_core_outputs,
+	.upll = true,
+};
+
+static const struct clk_pll_characteristics lvdspll_characteristics = {
+	.input = { .min = 20000000, .max = 50000000 },
+	.num_output = ARRAY_SIZE(lvdspll_outputs),
+	.output = lvdspll_outputs,
+	.core_output = lvdspll_core_outputs,
+};
+
+static const struct clk_pll_characteristics audiopll_characteristics = {
+	.input = { .min = 20000000, .max = 50000000 },
+	.num_output = ARRAY_SIZE(audiopll_outputs),
+	.output = audiopll_outputs,
+	.core_output = audiopll_core_outputs,
+};
+
+static const struct clk_pll_characteristics plladiv2_characteristics = {
+	.input = { .min = 20000000, .max = 50000000 },
+	.num_output = ARRAY_SIZE(plladiv2_outputs),
+	.output = plladiv2_outputs,
+	.core_output = plladiv2_core_outputs,
+};
+
+/* Layout for fractional PLLs. */
+static const struct clk_pll_layout pll_layout_frac = {
+	.mul_mask = GENMASK(31, 24),
+	.frac_mask = GENMASK(21, 0),
+	.mul_shift = 24,
+	.frac_shift = 0,
+};
+
+/* Layout for fractional PLL ID PLLA. */
+static const struct clk_pll_layout plla_layout_frac = {
+	.mul_mask = GENMASK(31, 24),
+	.frac_mask = GENMASK(21, 0),
+	.mul_shift = 24,
+	.frac_shift = 0,
+	.div2 = 1,
+};
+
+/* Layout for DIV PLLs. */
+static const struct clk_pll_layout pll_layout_divpmc = {
+	.div_mask = GENMASK(7, 0),
+	.endiv_mask = BIT(29),
+	.div_shift = 0,
+	.endiv_shift = 29,
+};
+
+/* Layout for DIV PLLs. */
+static const struct clk_pll_layout plladiv2_layout_divpmc = {
+	.div_mask = GENMASK(7, 0),
+	.endiv_mask = BIT(29),
+	.div_shift = 0,
+	.endiv_shift = 29,
+	.div2 = 1,
+};
+
+/* Layout for DIVIO dividers. */
+static const struct clk_pll_layout pll_layout_divio = {
+	.div_mask	= GENMASK(19, 12),
+	.endiv_mask	= BIT(30),
+	.div_shift	= 12,
+	.endiv_shift	= 30,
+};
+
+/* MCK characteristics. */
+static const struct clk_master_characteristics mck_characteristics = {
+	.output = { .min = 32000000, .max = 266666666 },
+	.divisors = { 1, 2, 4, 3, 5},
+	.have_div3_pres = 1,
+};
+
+/* MCK layout. */
+static const struct clk_master_layout mck_layout = {
+	.mask = 0x373,
+	.pres_shift = 4,
+	.offset = 0x28,
+};
+
+/* Programmable clock layout. */
+static const struct clk_programmable_layout programmable_layout = {
+	.pres_mask = 0xff,
+	.pres_shift = 8,
+	.css_mask = 0x1f,
+	.have_slck_mck = 0,
+	.is_pres_direct = 1,
+};
+
+/* Peripheral clock layout. */
+static const struct clk_pcr_layout sam9x7_pcr_layout = {
+	.offset = 0x88,
+	.cmd = BIT(31),
+	.gckcss_mask = GENMASK(12, 8),
+	.pid_mask = GENMASK(6, 0),
+};
+
+/**
+ * PLL clocks description
+ * @n:		clock name
+ * @p:		clock parent
+ * @l:		clock layout
+ * @t:		clock type
+ * @c:		pll characteristics
+ * @f:		true if clock is fixed and not changeable by driver
+ * @id:		clock id corresponding to PLL driver
+ * @cid:	clock id corresponding to clock subsystem
+ */
+static const struct {
+	const char *n;
+	const char *p;
+	const struct clk_pll_layout *l;
+	const struct clk_pll_characteristics *c;
+	u8 t;
+	u8 f;
+	u8 id;
+	u8 cid;
+} sam9x7_plls[] = {
+	{
+		.n = "plla_fracck",
+		.p = "mainck",
+		.l = &plla_layout_frac,
+		.c = &plla_characteristics,
+		.t = PLL_TYPE_FRAC,
+		.f = 1,
+		.id = 0,
+		.cid = ID_PLL_A_FRAC,
+	},
+
+	{
+		.n = "plla_divpmcck",
+		.p = "plla_fracck",
+		.l = &pll_layout_divpmc,
+		.c = &plla_characteristics,
+		.t = PLL_TYPE_DIV,
+		.f = 1,
+		.id = 0,
+		.cid = ID_PLL_A_DIV,
+	},
+
+	{
+		.n = "upll_fracck",
+		.p = "main_osc",
+		.l = &pll_layout_frac,
+		.c = &upll_characteristics,
+		.t = PLL_TYPE_FRAC,
+		.f = 1,
+		.id = 1,
+		.cid = ID_PLL_U_FRAC,
+	},
+
+	{
+		.n = "upll_divpmcck",
+		.p = "upll_fracck",
+		.l = &pll_layout_divpmc,
+		.c = &upll_characteristics,
+		.t = PLL_TYPE_DIV,
+		.f = 1,
+		.id = 1,
+		.cid = ID_PLL_U_DIV,
+	},
+
+	{
+		.n = "audiopll_fracck",
+		.p = "main_osc",
+		.l = &pll_layout_frac,
+		.c = &audiopll_characteristics,
+		.t = PLL_TYPE_FRAC,
+		.f = 1,
+		.id = 2,
+		.cid = ID_PLL_AUDIO_FRAC,
+	},
+
+	{
+		.n = "audiopll_divpmcck",
+		.p = "audiopll_fracck",
+		.l = &pll_layout_divpmc,
+		.c = &audiopll_characteristics,
+		.t = PLL_TYPE_DIV,
+		.f = 1,
+		.id = 2,
+		.cid = ID_PLL_AUDIO_DIVPMC,
+	},
+
+	{
+		.n = "audiopll_diviock",
+		.p = "audiopll_fracck",
+		.l = &pll_layout_divio,
+		.c = &audiopll_characteristics,
+		.t = PLL_TYPE_DIV,
+		.f = 1,
+		.id = 2,
+		.cid = ID_PLL_AUDIO_DIVIO,
+	},
+
+	{
+		.n = "lvdspll_fracck",
+		.p = "main_osc",
+		.l = &pll_layout_frac,
+		.c = &lvdspll_characteristics,
+		.t = PLL_TYPE_FRAC,
+		.f = 1,
+		.id = 3,
+		.cid = ID_PLL_LVDS_FRAC,
+	},
+
+	{
+		.n = "lvdspll_divpmcck",
+		.p = "lvdspll_fracck",
+		.l = &pll_layout_divpmc,
+		.c = &lvdspll_characteristics,
+		.t = PLL_TYPE_DIV,
+		.f = 1,
+		.id = 3,
+		.cid = ID_PLL_LVDS_DIV,
+	},
+
+	{
+		.n = "plla_div2pmcck",
+		.p = "plla_fracck",
+		.l = &plladiv2_layout_divpmc,
+		.c = &plladiv2_characteristics,
+		.t = PLL_TYPE_DIV,
+		.f = 1,
+		.id = 4,
+		.cid = ID_PLL_A_2_DIV,
+	},
+
+};
+
+/**
+ * Programmable clock description
+ * @n:			clock name
+ * @cid:		clock id corresponding to clock subsystem
+ */
+static const struct {
+	const char *n;
+	u8 cid;
+} sam9x7_prog[] = {
+	{ .n = "prog0", .cid = ID_PROG0, },
+	{ .n = "prog1", .cid = ID_PROG1, },
+};
+
+/* Mux table for programmable clocks. */
+static u32 sam9x7_prog_mux_table[] = { 0, 1, 2, 3, 4, 5, 6, };
+
+/**
+ * System clock description
+ * @n:			clock name
+ * @p:			parent clock name
+ * @id:			clock id corresponding to system clock driver
+ * @cid:		clock id corresponding to clock subsystem
+ */
+static const struct {
+	const char *n;
+	const char *p;
+	u8 id;
+	u8 cid;
+} sam9x7_systemck[] = {
+	{ .n = "ddrck", .p = "mck_pres", .id = 2, .cid = ID_DDR, },
+	{ .n = "pck0",	.p = "prog0",	 .id = 8, .cid = ID_PCK0, },
+	{ .n = "pck1",	.p = "prog1",	 .id = 9, .cid = ID_PCK1, },
+};
+
+/**
+ * Peripheral clock description
+ * @n:		clock name
+ * @id:		clock id
+ */
+static const struct {
+	const char *n;
+	u8 id;
+} sam9x7_periphck[] = {
+	{ .n = "pioA_clk",	.id = 2, },
+	{ .n = "pioB_clk",	.id = 3, },
+	{ .n = "pioC_clk",	.id = 4, },
+	{ .n = "flex0_clk",	.id = 5, },
+	{ .n = "flex1_clk",	.id = 6, },
+	{ .n = "flex2_clk",	.id = 7, },
+	{ .n = "flex3_clk",	.id = 8, },
+	{ .n = "flex6_clk",	.id = 9, },
+	{ .n = "flex7_clk",	.id = 10, },
+	{ .n = "flex8_clk",	.id = 11, },
+	{ .n = "sdmmc0_clk",	.id = 12, },
+	{ .n = "flex4_clk",	.id = 13, },
+	{ .n = "flex5_clk",	.id = 14, },
+	{ .n = "flex9_clk",	.id = 15, },
+	{ .n = "flex10_clk",	.id = 16, },
+	{ .n = "tcb0_clk",	.id = 17, },
+	{ .n = "pwm_clk",	.id = 18, },
+	{ .n = "adc_clk",	.id = 19, },
+	{ .n = "dma0_clk",	.id = 20, },
+	{ .n = "uhphs_clk",	.id = 22, },
+	{ .n = "udphs_clk",	.id = 23, },
+	{ .n = "gmac_clk",	.id = 24, },
+	{ .n = "lcd_clk",	.id = 25, },
+	{ .n = "sdmmc1_clk",	.id = 26, },
+	{ .n = "ssc_clk",	.id = 28, },
+	{ .n = "mcan0_clk",	.id = 29, },
+	{ .n = "mcan1_clk",	.id = 30, },
+	{ .n = "flex11_clk",	.id = 32, },
+	{ .n = "flex12_clk",	.id = 33, },
+	{ .n = "i2s_clk",	.id = 34, },
+	{ .n = "qspi_clk",	.id = 35, },
+	{ .n = "gfx2d_clk",	.id = 36, },
+	{ .n = "pit64b0_clk",	.id = 37, },
+	{ .n = "trng_clk",	.id = 38, },
+	{ .n = "aes_clk",	.id = 39, },
+	{ .n = "tdes_clk",	.id = 40, },
+	{ .n = "sha_clk",	.id = 41, },
+	{ .n = "classd_clk",	.id = 42, },
+	{ .n = "isi_clk",	.id = 43, },
+	{ .n = "pioD_clk",	.id = 44, },
+	{ .n = "tcb1_clk",	.id = 45, },
+	{ .n = "dbgu_clk",	.id = 47, },
+	{ .n = "pmecc_clk",	.id = 48, },
+	{ .n = "mpddr_clk",	.id = 49, },
+	{ .n = "csi2dc_clk",	.id = 52, },
+	{ .n = "csi4l_clk",	.id = 53, },
+	{ .n = "dsi4l_clk",	.id = 54, },
+	{ .n = "lvdsc_clk",	.id = 56, },
+	{ .n = "pit64b1_clk",	.id = 58, },
+	{ .n = "puf_clk",	.id = 59, },
+	{ .n = "gmactsu_clk",	.id = 67, },
+};
+
+/**
+ * Generic clock description
+ * @n:			clock name
+ * @ep:			extra parents names
+ * @ep_mux_table:	extra parents mux table
+ * @ep_clk_mux_table:	extra parents clock mux table (for CCF)
+ * @r:			clock output range
+ * @ep_count:		extra parents count
+ * @id:			clock id
+ */
+static const struct {
+	const char *n;
+	const char *ep[8];
+	const char ep_mux_table[8];
+	const char ep_clk_mux_table[8];
+	struct clk_range r;
+	u8 ep_count;
+	u8 id;
+} sam9x7_gck[] = {
+	{
+		.n = "flex0_gclk",
+		.id = 5,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex1_gclk",
+		.id = 6,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex2_gclk",
+		.id = 7,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex3_gclk",
+		.id = 8,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex6_gclk",
+		.id = 9,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex7_gclk",
+		.id = 10,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex8_gclk",
+		.id = 11,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "sdmmc0_gclk",
+		.id = 12,
+		.r = { .max = 105000000 },
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "flex4_gclk",
+		.id = 13,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex5_gclk",
+		.id = 14,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex9_gclk",
+		.id = 15,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex10_gclk",
+		.id = 16,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "tcb0_gclk",
+		.id = 17,
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "adc_gclk",
+		.id = 19,
+		.ep = { "upll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 5, 8, },
+		.ep_clk_mux_table = { ID_PLL_U_DIV, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "gmac_gclk",
+		.id = 24,
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "lcd_gclk",
+		.id = 25,
+		.r = { .max = 75000000 },
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "sdmmc1_gclk",
+		.id = 26,
+		.r = { .max = 105000000 },
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "mcan0_gclk",
+		.id = 29,
+		.r = { .max = 80000000 },
+		.ep = { "upll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 5, 8, },
+		.ep_clk_mux_table = { ID_PLL_U_DIV, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "mcan1_gclk",
+		.id = 30,
+		.r = { .max = 80000000 },
+		.ep = { "upll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 5, 8, },
+		.ep_clk_mux_table = { ID_PLL_U_DIV, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "flex11_gclk",
+		.id = 32,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "flex12_gclk",
+		.id = 33,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "i2s_gclk",
+		.id = 34,
+		.r = { .max = 100000000 },
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "qspi_gclk",
+		.id = 35,
+		.r = { .max = 200000000 },
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "pit64b0_gclk",
+		.id = 37,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "classd_gclk",
+		.id = 42,
+		.r = { .max = 100000000 },
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "tcb1_gclk",
+		.id = 45,
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+	{
+		.n = "dbgu_gclk",
+		.id = 47,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "mipiphy_gclk",
+		.id = 55,
+		.r = { .max = 27000000 },
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "pit64b1_gclk",
+		.id = 58,
+		.ep = { "plla_div2pmcck", },
+		.ep_mux_table = { 8, },
+		.ep_clk_mux_table = { ID_PLL_A_2_DIV, },
+		.ep_count = 1,
+	},
+
+	{
+		.n = "gmac_tsu_gclk",
+		.id = 67,
+		.ep = { "audiopll_divpmcck", "plla_div2pmcck", },
+		.ep_mux_table = { 6, 8, },
+		.ep_clk_mux_table = { ID_PLL_AUDIO_DIVPMC, ID_PLL_A_2_DIV, },
+		.ep_count = 2,
+	},
+
+};
+
+#define prepare_mux_table(_allocs, _index, _dst, _src, _num, _label)	\
+	do {								\
+		int _i;							\
+		(_dst) = kzalloc(sizeof(*(_dst)) * (_num), GFP_KERNEL);	\
+		if (!(_dst)) {						\
+			ret = -ENOMEM;					\
+			goto _label;					\
+		}							\
+		(_allocs)[(_index)++] = (_dst);				\
+		for (_i = 0; _i < (_num); _i++)				\
+			(_dst)[_i] = (_src)[_i];			\
+	} while (0)
+
+static int sam9x7_clk_probe(struct udevice *dev)
+{
+	void __iomem *base = (void *)devfdt_get_addr_ptr(dev);
+	unsigned int *clkmuxallocs[64], *muxallocs[64];
+	const char *p[10];
+	unsigned int cm[10], m[10], *tmpclkmux, *tmpmux;
+	struct clk clk, *c;
+	int ret, muxallocindex = 0, clkmuxallocindex = 0, i, j;
+	static const struct clk_range r = { 0, 0 };
+
+	if (!base)
+		return -EINVAL;
+
+	memset(muxallocs, 0, ARRAY_SIZE(muxallocs));
+	memset(clkmuxallocs, 0, ARRAY_SIZE(clkmuxallocs));
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret)
+		return ret;
+
+	ret = clk_get_by_id(clk.id, &c);
+	if (ret)
+		return ret;
+
+	clk_names[ID_TD_SLCK] = kmemdup(clk_hw_get_name(c),
+					strlen(clk_hw_get_name(c)) + 1,
+					GFP_KERNEL);
+	if (!clk_names[ID_TD_SLCK])
+		return -ENOMEM;
+
+	ret = clk_get_by_index(dev, 1, &clk);
+	if (ret)
+		return ret;
+
+	ret = clk_get_by_id(clk.id, &c);
+	if (ret)
+		return ret;
+
+	clk_names[ID_MD_SLCK] = kmemdup(clk_hw_get_name(c),
+					strlen(clk_hw_get_name(c)) + 1,
+					GFP_KERNEL);
+	if (!clk_names[ID_MD_SLCK])
+		return -ENOMEM;
+
+	ret = clk_get_by_index(dev, 2, &clk);

drivers/clk/at91/sam9x7.c line 866

Quoted 10 lines
drivers/clk/at91/sam9x7.c new file +10 -0
+	if (ret)
+		return ret;
+
+	clk_names[ID_MAIN_XTAL] = kmemdup(clk_hw_get_name(&clk),
+					  strlen(clk_hw_get_name(&clk)) + 1,
+					  GFP_KERNEL);
+	if (!clk_names[ID_MAIN_XTAL])
+		return -ENOMEM;
+
+	ret = clk_get_by_index(dev, 3, &clk);

Linux does not have this clock if I am not mistaking.
This is the "main_rc" , right ?
Legacy speaking, U-boot has had four clocks on the PMC.
But now you are writing this new pmc driver for sam9x7.
Can you remove this clock such that the binding would be aligned to linux ? What is this clock required for ?

Eugen

Quoted 228 lines
drivers/clk/at91/sam9x7.c new file +228 -0
+	if (ret)
+		goto fail;
+
+	clk_names[ID_MAIN_RC] = kmemdup(clk_hw_get_name(&clk),
+					strlen(clk_hw_get_name(&clk)) + 1,
+					GFP_KERNEL);
+	if (ret)
+		goto fail;
+
+	/* Register main rc oscillator. */
+	c = at91_clk_main_rc(base, clk_names[ID_MAIN_RC_OSC],
+			     clk_names[ID_MAIN_RC]);
+	if (IS_ERR(c)) {
+		ret = PTR_ERR(c);
+		goto fail;
+	}
+	clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_RC_OSC), c);
+
+	/* Register main oscillator. */
+	c = at91_clk_main_osc(base, clk_names[ID_MAIN_OSC],
+			      clk_names[ID_MAIN_XTAL], false);
+	if (IS_ERR(c)) {
+		ret = PTR_ERR(c);
+		goto fail;
+	}
+	clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_OSC), c);
+
+	/* Register mainck. */
+	p[0] = clk_names[ID_MAIN_RC_OSC];
+	p[1] = clk_names[ID_MAIN_OSC];
+	cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_RC_OSC);
+	cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_OSC);
+	prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, 2,
+			  fail);
+	c = at91_clk_sam9x5_main(base, clk_names[ID_MAINCK], p,
+				 2, tmpclkmux, PMC_TYPE_CORE);
+	if (IS_ERR(c)) {
+		ret = PTR_ERR(c);
+		goto fail;
+	}
+	clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK), c);
+
+	/* Register PLL fracs clocks. */
+	for (i = 0; i < ARRAY_SIZE(sam9x7_plls); i++) {
+		if (sam9x7_plls[i].t != PLL_TYPE_FRAC)
+			continue;
+
+		c = sam9x60_clk_register_frac_pll(base, sam9x7_plls[i].n,
+						  sam9x7_plls[i].p,
+						  sam9x7_plls[i].id,
+						  sam9x7_plls[i].c,
+						  sam9x7_plls[i].l,
+						  sam9x7_plls[i].f);
+		if (IS_ERR(c)) {
+			ret = PTR_ERR(c);
+			goto fail;
+		}
+		clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, sam9x7_plls[i].cid), c);
+	}
+
+	/* Register PLL div clocks. */
+	for (i = 0; i < ARRAY_SIZE(sam9x7_plls); i++) {
+		if (sam9x7_plls[i].t != PLL_TYPE_DIV)
+			continue;
+
+		c = sam9x60_clk_register_div_pll(base, sam9x7_plls[i].n,
+						 sam9x7_plls[i].p,
+						 sam9x7_plls[i].id,
+						 sam9x7_plls[i].c,
+						 sam9x7_plls[i].l,
+						 sam9x7_plls[i].f);
+		if (IS_ERR(c)) {
+			ret = PTR_ERR(c);
+			goto fail;
+		}
+		clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, sam9x7_plls[i].cid), c);
+	}
+
+	/* Register MCK pres clock. */
+	p[0] = clk_names[ID_MD_SLCK];
+	p[1] = clk_names[ID_MAINCK];
+	p[2] = clk_names[ID_PLL_A_DIV];
+	p[3] = clk_names[ID_PLL_U_DIV];
+	cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MD_SLCK);
+	cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK);
+	cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_A_DIV);
+	cm[3] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV);
+	prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, 4,
+			  fail);
+	c = at91_clk_register_master_pres(base, clk_names[ID_MCK_PRES], p, 4,
+					  &mck_layout, &mck_characteristics,
+					  tmpclkmux);
+	if (IS_ERR(c)) {
+		ret = PTR_ERR(c);
+		goto fail;
+	}
+	clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_PRES), c);
+
+	/* Register MCK div clock. */
+	c = at91_clk_register_master_div(base, clk_names[ID_MCK_DIV],
+					 clk_names[ID_MCK_PRES],
+					 &mck_layout, &mck_characteristics);
+	if (IS_ERR(c)) {
+		ret = PTR_ERR(c);
+		goto fail;
+	}
+	clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_DIV), c);
+
+	/* Register programmable clocks. */
+	p[0] = clk_names[ID_MD_SLCK];
+	p[1] = clk_names[ID_TD_SLCK];
+	p[2] = clk_names[ID_MAINCK];
+	p[3] = clk_names[ID_MCK_DIV];
+	p[4] = clk_names[ID_PLL_A_DIV];
+	p[5] = clk_names[ID_PLL_U_DIV];
+	p[6] = clk_names[ID_PLL_AUDIO_DIVPMC];
+	cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MD_SLCK);
+	cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_TD_SLCK);
+	cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK);
+	cm[3] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_DIV);
+	cm[4] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_A_DIV);
+	cm[5] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV);
+	cm[6] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_AUDIO_DIVPMC);
+	for (i = 0; i < ARRAY_SIZE(sam9x7_prog); i++) {
+		prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm,
+				  7, fail);
+
+		c = at91_clk_register_programmable(base, sam9x7_prog[i].n, p,
+						   7, i, &programmable_layout,
+						   tmpclkmux,
+						   sam9x7_prog_mux_table);
+		if (IS_ERR(c)) {
+			ret = PTR_ERR(c);
+			goto fail;
+		}
+		clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, sam9x7_prog[i].cid), c);
+	}
+
+	/* System clocks. */
+	for (i = 0; i < ARRAY_SIZE(sam9x7_systemck); i++) {
+		c = at91_clk_register_system(base, sam9x7_systemck[i].n,
+					     sam9x7_systemck[i].p,
+					     sam9x7_systemck[i].id);
+		if (IS_ERR(c)) {
+			ret = PTR_ERR(c);
+			goto fail;
+		}
+		clk_dm(AT91_TO_CLK_ID(PMC_TYPE_SYSTEM, sam9x7_systemck[i].cid),
+		       c);
+	}
+
+	/* Peripheral clocks. */
+	for (i = 0; i < ARRAY_SIZE(sam9x7_periphck); i++) {
+		c = at91_clk_register_sam9x5_peripheral(base, &sam9x7_pcr_layout,
+							sam9x7_periphck[i].n,
+							clk_names[ID_MCK_DIV],
+							sam9x7_periphck[i].id,
+							&r);
+		if (IS_ERR(c)) {
+			ret = PTR_ERR(c);
+			goto fail;
+		}
+		clk_dm(AT91_TO_CLK_ID(PMC_TYPE_PERIPHERAL,
+				      sam9x7_periphck[i].id), c);
+	}
+
+	/* Generic clocks. */
+	p[0] = clk_names[ID_MD_SLCK];
+	p[1] = clk_names[ID_TD_SLCK];
+	p[2] = clk_names[ID_MAINCK];
+	p[3] = clk_names[ID_MCK_DIV];
+	m[0] = 0;
+	m[1] = 1;
+	m[2] = 2;
+	m[3] = 3;
+	cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MD_SLCK);
+	cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_TD_SLCK);
+	cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK);
+	cm[3] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_DIV);
+	for (i = 0; i < ARRAY_SIZE(sam9x7_gck); i++) {
+		for (j = 0; j < sam9x7_gck[i].ep_count; j++) {
+			p[4 + j] = sam9x7_gck[i].ep[j];
+			m[4 + j] = sam9x7_gck[i].ep_mux_table[j];
+			cm[4 + j] = AT91_TO_CLK_ID(PMC_TYPE_CORE,
+						   sam9x7_gck[i].ep_clk_mux_table[j]);
+		}
+		prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm,
+				  4 + sam9x7_gck[i].ep_count, fail);
+		prepare_mux_table(muxallocs, muxallocindex, tmpmux, m,
+				  4 + sam9x7_gck[i].ep_count, fail);
+
+		c = at91_clk_register_generic(base, &sam9x7_pcr_layout,
+					      sam9x7_gck[i].n, p, tmpclkmux,
+					      tmpmux, 4 + sam9x7_gck[i].ep_count,
+					      sam9x7_gck[i].id,
+					      &sam9x7_gck[i].r);
+		if (IS_ERR(c)) {
+			ret = PTR_ERR(c);
+			goto fail;
+		}
+		clk_dm(AT91_TO_CLK_ID(PMC_TYPE_GCK, sam9x7_gck[i].id), c);
+	}
+
+	return 0;
+
+fail:
+	for (i = 0; i < ARRAY_SIZE(muxallocs); i++)
+		kfree(muxallocs[i]);
+
+	for (i = 0; i < ARRAY_SIZE(clkmuxallocs); i++)
+		kfree(clkmuxallocs[i]);
+
+	return ret;
+}
+
+static const struct udevice_id sam9x7_clk_ids[] = {
+	{ .compatible = "microchip,sam9x7-pmc" },
+	{ /* Sentinel. */ },
+};
+
+U_BOOT_DRIVER(at91_sam9x7_pmc) = {
+	.name = "at91-sam9x7-pmc",
+	.id = UCLASS_CLK,
+	.of_match = sam9x7_clk_ids,
+	.ops = &at91_clk_ops,
+	.probe = sam9x7_clk_probe,
+	.flags = DM_FLAG_PRE_RELOC,
+};
#6 lore raw

PATCH v4 5/8 ARM: at91: Add sam9x7 soc

In reply to Manikandan Muralidharan

From: Varshini Rajendran <[email protected]>

Add new Microchip sam9x7 SoC based on an ARM926.

---
 arch/arm/mach-at91/Kconfig                    |   4 +
 arch/arm/mach-at91/arm926ejs/Makefile         |   1 +
 arch/arm/mach-at91/arm926ejs/sam9x7_devices.c |  49 +++++
 arch/arm/mach-at91/include/mach/hardware.h    |   2 +
 arch/arm/mach-at91/include/mach/sam9x7.h      | 172 ++++++++++++++++++
 5 files changed, 228 insertions(+)
 create mode 100644 arch/arm/mach-at91/arm926ejs/sam9x7_devices.c
 create mode 100644 arch/arm/mach-at91/include/mach/sam9x7.h
arch/arm/mach-at91/Kconfig +4 -0
index 7c4ccc427c8..5429257875d 100644
@@ -43,6 +43,10 @@ config SAM9X60
 	bool
 	select CPU_ARM926EJS
 
+config SAM9X7
+	bool
+	select CPU_ARM926EJS
+
 config SAMA7G5
 	bool
 	select CPU_V7A
arch/arm/mach-at91/arm926ejs/Makefile +1 -0
index 8f0bc5d997e..977299a5911 100644
@@ -14,6 +14,7 @@ obj-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
 obj-$(CONFIG_AT91SAM9N12)	+= at91sam9n12_devices.o
 obj-$(CONFIG_AT91SAM9X5)	+= at91sam9x5_devices.o
 obj-$(CONFIG_SAM9X60)		+= sam9x60_devices.o
+obj-$(CONFIG_SAM9X7)		+= sam9x7_devices.o
 obj-y += clock.o
 obj-y += cpu.o
 ifndef CONFIG_$(PHASE_)SYSRESET
arch/arm/mach-at91/arm926ejs/sam9x7_devices.c new file +49 -0

49 lines not on this page · raw message

arch/arm/mach-at91/include/mach/hardware.h +2 -0
index 988ef492b62..de89714b097 100644
@@ -23,6 +23,8 @@
 # include <asm/arch/at91sam9x5.h>
 #elif defined(CONFIG_SAM9X60)
 # include <asm/arch/sam9x60.h>
+#elif defined(CONFIG_SAM9X7)
+# include <asm/arch/sam9x7.h>
 #elif defined(CONFIG_SAMA7G5)
 # include <asm/arch/sama7g5.h>
 #elif defined(CONFIG_SAMA5D2)
arch/arm/mach-at91/include/mach/sam9x7.h new file +172 -0

172 lines not on this page · raw message

Signature · 1 line
2.25.1
#7 lore raw

PATCH v4 6/8 ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board

In reply to Manikandan Muralidharan

Since the SoC and board DT are already available in dts/upstream, add the difference from upstream DTS to at91-sam9x75_curiosity-u-boot.dtsi

---
 .../dts/at91-sam9x75_curiosity-u-boot.dtsi    | 107 ++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 arch/arm/dts/at91-sam9x75_curiosity-u-boot.dtsi
arch/arm/dts/at91-sam9x75_curiosity-u-boot.dtsi new file +107 -0
new file mode 100644
index 00000000000..dc4fef950ec
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x75_curiosity-u-boot.dtsi - Device Tree file for SAM9X75
+ * CURIOSITY board.
+ *
+ * Copyright (C) 2025 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Manikandan Muralidharan <[email protected]>
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			clocks = <&pmc PMC_TYPE_CORE 25>, <&pmc PMC_TYPE_CORE 17>, <&main_xtal>;
+			clock-names = "cpu", "master", "xtal";
+		};
+	};
+
+	clocks {
+		slow_rc_osc: slow_rc_osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <18500>;
+		};
+
+		main_rc: main_rc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		bootph-all;
+
+		apb {
+			bootph-all;
+
+			pinctrl {
+				bootph-all;
+			};
+		};
+	};
+
+	chosen {
+		bootph-all;
+	};
+};
+
+&clk32k {
+	bootph-all;
+	clocks = <&slow_rc_osc>, <&slow_xtal>;
+};
+
+&dbgu {
+	bootph-all;
+};
+
+&gmac {
+	compatible = "microchip,sam9x7-gem", "cdns,sama7g5-gem";
+};
+
+&main_rc {
+	bootph-all;
+};
+
+&main_xtal {
+	bootph-all;
+};
+
+&pinctrl_dbgu_default {
+	bootph-all;
+};
+
+&pinctrl_sdmmc0_default {
+	bootph-all;
+};
+
+&pioA {
+	bootph-all;
+};
+
+&pioB {
+	bootph-all;
+};
+
+&pit64b0 {
+	bootph-all;
+};
+
+&pmc {
+	bootph-all;
+	clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>, <&main_rc>;
+	clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
+};
+
+&sdmmc0 {
+	bootph-all;
+};
+
+&slow_xtal {
+	bootph-all;
+};
+
+&slow_rc_osc {
+	bootph-all;
+};
Signature · 1 line
2.25.1
#8 lore raw

PATCH v4 7/8 board: sam9x75_curiosity: Add support for sam9x75 curiosity

In reply to Manikandan Muralidharan

Add board specific functions for sam9x75 curiosity

---
 arch/arm/mach-at91/Kconfig                    |  8 +++
 board/atmel/sam9x75_curiosity/Kconfig         | 15 +++++
 board/atmel/sam9x75_curiosity/MAINTAINERS     |  6 ++
 board/atmel/sam9x75_curiosity/Makefile        |  7 ++
 .../sam9x75_curiosity/sam9x75_curiosity.c     | 66 +++++++++++++++++++
 include/configs/sam9x75_curiosity.h           | 23 +++++++
 6 files changed, 125 insertions(+)
 create mode 100644 board/atmel/sam9x75_curiosity/Kconfig
 create mode 100644 board/atmel/sam9x75_curiosity/MAINTAINERS
 create mode 100644 board/atmel/sam9x75_curiosity/Makefile
 create mode 100644 board/atmel/sam9x75_curiosity/sam9x75_curiosity.c
 create mode 100644 include/configs/sam9x75_curiosity.h
arch/arm/mach-at91/Kconfig +8 -0
index 5429257875d..d21534ce883 100644
@@ -158,6 +158,13 @@ config TARGET_SAM9X60_CURIOSITY
         select BOARD_EARLY_INIT_F
         select BOARD_LATE_INIT
 
+config TARGET_SAM9X75_CURIOSITY
+	bool "SAM9X75 CURIOSITY board"
+	select SAM9X7
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	imply OF_UPSTREAM
+
 config TARGET_SAMA5D2_PTC_EK
 	bool "SAMA5D2 PTC EK board"
 	select BOARD_EARLY_INIT_F
@@ -355,6 +362,7 @@ source "board/atmel/at91sam9rlek/Kconfig"
 source "board/atmel/at91sam9x5ek/Kconfig"
 source "board/atmel/sam9x60ek/Kconfig"
 source "board/atmel/sam9x60_curiosity/Kconfig"
+source "board/atmel/sam9x75_curiosity/Kconfig"
 source "board/atmel/sama7g5ek/Kconfig"
 source "board/atmel/sama7g54_curiosity/Kconfig"
 source "board/atmel/sama5d2_ptc_ek/Kconfig"
board/atmel/sam9x75_curiosity/Kconfig new file +15 -0
new file mode 100644
index 00000000000..8ea93a21aa3
@@ -0,0 +1,15 @@
+if TARGET_SAM9X75_CURIOSITY
+
+config SYS_BOARD
+	default "sam9x75_curiosity"
+
+config SYS_VENDOR
+	default "atmel"
+
+config SYS_SOC
+	default "at91"
+
+config SYS_CONFIG_NAME
+	default "sam9x75_curiosity"
+
+endif
board/atmel/sam9x75_curiosity/MAINTAINERS new file +6 -0
new file mode 100644
index 00000000000..a175053418f
@@ -0,0 +1,6 @@
+SAM9X75 CURIOSITY BOARD
+M:	Manikandan Muralidharan <[email protected]>
+S:	Maintained
+F:	board/atmel/sam9x75_curiosity/
+F:	include/configs/sam9x75_curiosity.h
+F:	arch/arm/dts/at91-sam9x75_curiosity-u-boot.dtsi
board/atmel/sam9x75_curiosity/Makefile new file +7 -0
new file mode 100644
index 00000000000..1f36d613229
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2025 Microchip Technology Inc. and its subsidiaries
+#
+# Author: Manikandan Muralidharan <[email protected]>
+
+obj-y += sam9x75_curiosity.o
board/atmel/sam9x75_curiosity/sam9x75_curiosity.c new file +66 -0

66 lines not on this page · raw message

include/configs/sam9x75_curiosity.h new file +23 -0
new file mode 100644
index 00000000000..62a855d9f01
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the SAM9X75 CURIOSITY board.
+ *
+ * Copyright (C) 2025 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Manikandan Muralidharan <[email protected]>
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#define CFG_SYS_AT91_SLOW_CLOCK	32768
+#define CFG_SYS_AT91_MAIN_CLOCK	24000000	/* 24 MHz crystal */
+
+#define CFG_USART_BASE   ATMEL_BASE_DBGU
+#define CFG_USART_ID     0 /* ignored in arm */
+
+/* SDRAM */
+#define CFG_SYS_SDRAM_BASE		0x20000000
+#define CFG_SYS_SDRAM_SIZE		0x10000000      /* 256 megs */
+
+#endif
Signature · 1 line
2.25.1
#9 lore raw

PATCH v4 8/8 configs: sam9x75_curiosity: Add initial mmc default config

In reply to Manikandan Muralidharan

Add default configuration for sd-card to boot the linux kernel.

---
 board/atmel/sam9x75_curiosity/MAINTAINERS |  1 +
 configs/sam9x75_curiosity_mmc_defconfig   | 73 +++++++++++++++++++++++
 2 files changed, 74 insertions(+)
 create mode 100644 configs/sam9x75_curiosity_mmc_defconfig
board/atmel/sam9x75_curiosity/MAINTAINERS +1 -0
index a175053418f..f0dfdbe8d5c 100644
@@ -4,3 +4,4 @@ S:	Maintained
 F:	board/atmel/sam9x75_curiosity/
 F:	include/configs/sam9x75_curiosity.h
 F:	arch/arm/dts/at91-sam9x75_curiosity-u-boot.dtsi
+F:	configs/sam9x75_curiosity_mmc_defconfig
configs/sam9x75_curiosity_mmc_defconfig new file +73 -0

73 lines not on this page · raw message

Signature · 1 line
2.25.1