6.13.8-rc1 review

index 9f93b230652a5..863c3f672ba98 100644
@@ -506,7 +506,7 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
 }
 
 static DECLARE_TLV_DB_SCALE(tas2770_digital_tlv, 1100, 50, 0);
-static DECLARE_TLV_DB_SCALE(tas2770_playback_volume, -12750, 50, 0);
+static DECLARE_TLV_DB_SCALE(tas2770_playback_volume, -10050, 50, 0);
 
 static const struct snd_kcontrol_new tas2770_snd_controls[] = {
 	SOC_SINGLE_TLV("Speaker Playback Volume", TAS2770_PLAY_CFG_REG2,

index 168af772a898f..d13ecae9c9c2f 100644
@@ -25,7 +25,7 @@
 
 /* Power Control */
 #define TAS2764_PWR_CTRL		TAS2764_REG(0X0, 0x02)
-#define TAS2764_PWR_CTRL_MASK		GENMASK(1, 0)
+#define TAS2764_PWR_CTRL_MASK		GENMASK(2, 0)
 #define TAS2764_PWR_CTRL_ACTIVE		0x0
 #define TAS2764_PWR_CTRL_MUTE		BIT(0)
 #define TAS2764_PWR_CTRL_SHUTDOWN	BIT(1)

index d482cd194c08c..58315eab492a1 100644
@@ -365,7 +365,7 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct snd_soc_component *component = dai->component;
 	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
-	u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0;
+	u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0, asi_cfg_4 = 0;
 	int ret;
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {

@@ -374,12 +374,14 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		fallthrough;
 	case SND_SOC_DAIFMT_NB_NF:
 		asi_cfg_1 = TAS2764_TDM_CFG1_RX_RISING;
+		asi_cfg_4 = TAS2764_TDM_CFG4_TX_FALLING;
 		break;
 	case SND_SOC_DAIFMT_IB_IF:
 		asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
 		fallthrough;
 	case SND_SOC_DAIFMT_IB_NF:
 		asi_cfg_1 = TAS2764_TDM_CFG1_RX_FALLING;
+		asi_cfg_4 = TAS2764_TDM_CFG4_TX_RISING;
 		break;
 	}
 

@@ -389,6 +391,12 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	if (ret < 0)
 		return ret;
 
+	ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG4,
+					    TAS2764_TDM_CFG4_TX_MASK,
+					    asi_cfg_4);
+	if (ret < 0)
+		return ret;
+
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;

index d13ecae9c9c2f..9490f2686e389 100644
@@ -79,6 +79,12 @@
 #define TAS2764_TDM_CFG3_RXS_SHIFT	0x4
 #define TAS2764_TDM_CFG3_MASK		GENMASK(3, 0)
 
+/* TDM Configuration Reg4 */
+#define TAS2764_TDM_CFG4		TAS2764_REG(0X0, 0x0d)
+#define TAS2764_TDM_CFG4_TX_MASK	BIT(0)
+#define TAS2764_TDM_CFG4_TX_RISING	0x0
+#define TAS2764_TDM_CFG4_TX_FALLING	BIT(0)
+
 /* TDM Configuration Reg5 */
 #define TAS2764_TDM_CFG5		TAS2764_REG(0X0, 0x0e)
 #define TAS2764_TDM_CFG5_VSNS_MASK	BIT(6)

index e540d05549fff..b7944d8bfb171 100644
@@ -1633,7 +1633,7 @@ static const char *fuse_get_link(struct dentry *dentry, struct inode *inode,
 		goto out_err;
 
 	if (fc->cache_symlinks)
-		return page_get_link(dentry, inode, callback);
+		return page_get_link_raw(dentry, inode, callback);
 
 	err = -ECHILD;
 	if (!dentry)

index 9d30c7aa9aa6e..553729a29095d 100644
@@ -5354,10 +5354,9 @@ const char *vfs_get_link(struct dentry *dentry, struct delayed_call *done)
 EXPORT_SYMBOL(vfs_get_link);
 
 /* get the link contents into pagecache */
-const char *page_get_link(struct dentry *dentry, struct inode *inode,
-			  struct delayed_call *callback)
+static char *__page_get_link(struct dentry *dentry, struct inode *inode,
+			     struct delayed_call *callback)
 {
-	char *kaddr;
 	struct page *page;
 	struct address_space *mapping = inode->i_mapping;
 

@@ -5376,8 +5375,23 @@ const char *page_get_link(struct dentry *dentry, struct inode *inode,
 	}
 	set_delayed_call(callback, page_put_link, page);
 	BUG_ON(mapping_gfp_mask(mapping) & __GFP_HIGHMEM);
-	kaddr = page_address(page);
-	nd_terminate_link(kaddr, inode->i_size, PAGE_SIZE - 1);
+	return page_address(page);
+}
+
+const char *page_get_link_raw(struct dentry *dentry, struct inode *inode,
+			      struct delayed_call *callback)
+{
+	return __page_get_link(dentry, inode, callback);
+}
+EXPORT_SYMBOL_GPL(page_get_link_raw);
+
+const char *page_get_link(struct dentry *dentry, struct inode *inode,
+					struct delayed_call *callback)
+{
+	char *kaddr = __page_get_link(dentry, inode, callback);
+
+	if (!IS_ERR(kaddr))
+		nd_terminate_link(kaddr, inode->i_size, PAGE_SIZE - 1);
 	return kaddr;
 }
 

index f7efc6866ebc9..1f07469f3d6e1 100644
@@ -3353,6 +3353,8 @@ extern const struct file_operations generic_ro_fops;
 
 extern int readlink_copy(char __user *, int, const char *);
 extern int page_readlink(struct dentry *, char __user *, int);
+extern const char *page_get_link_raw(struct dentry *, struct inode *,
+				     struct delayed_call *);
 extern const char *page_get_link(struct dentry *, struct inode *,
 				 struct delayed_call *);
 extern void page_put_link(void *);

index be689f6e10c81..a1ccd95da8bb7 100644
@@ -1312,22 +1312,8 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev)
 		/* report to machine driver if any DMICs are found */
 		mach->mach_params.dmic_num = check_dmic_num(sdev);
 
-		if (sdw_mach_found) {
-			/*
-			 * DMICs use up to 4 pins and are typically pin-muxed with SoundWire
-			 * link 2 and 3, or link 1 and 2, thus we only try to enable dmics
-			 * if all conditions are true:
-			 * a) 2 or fewer links are used by SoundWire
-			 * b) the NHLT table reports the presence of microphones
-			 */
-			if (hweight_long(mach->link_mask) <= 2)
-				dmic_fixup = true;
-			else
-				mach->mach_params.dmic_num = 0;
-		} else {
-			if (mach->tplg_quirk_mask & SND_SOC_ACPI_TPLG_INTEL_DMIC_NUMBER)
-				dmic_fixup = true;
-		}
+		if (sdw_mach_found || mach->tplg_quirk_mask & SND_SOC_ACPI_TPLG_INTEL_DMIC_NUMBER)
+			dmic_fixup = true;
 
 		if (tplg_fixup &&
 		    dmic_fixup &&

index 3f0977d746bee..87dfb9f69ee5b 100644
@@ -98,7 +98,7 @@ static u16 lerp_u16(u16 a, u16 b, s64 t)
 
 	s64 delta = drm_fixp_mul(b_fp - a_fp,  t);
 
-	return drm_fixp2int(a_fp + delta);
+	return drm_fixp2int_round(a_fp + delta);
 }
 
 static s64 get_lut_index(const struct vkms_color_lut *lut, u16 channel_value)

index 2bba1d934efb0..6651360d6a525 100644
@@ -3949,6 +3949,85 @@ static inline bool intel_pmu_has_cap(struct perf_event *event, int idx)
 	return test_bit(idx, (unsigned long *)&intel_cap->capabilities);
 }
 
+static u64 intel_pmu_freq_start_period(struct perf_event *event)
+{
+	int type = event->attr.type;
+	u64 config, factor;
+	s64 start;
+
+	/*
+	 * The 127 is the lowest possible recommended SAV (sample after value)
+	 * for a 4000 freq (default freq), according to the event list JSON file.
+	 * Also, assume the workload is idle 50% time.
+	 */
+	factor = 64 * 4000;
+	if (type != PERF_TYPE_HARDWARE && type != PERF_TYPE_HW_CACHE)
+		goto end;
+
+	/*
+	 * The estimation of the start period in the freq mode is
+	 * based on the below assumption.
+	 *
+	 * For a cycles or an instructions event, 1GHZ of the
+	 * underlying platform, 1 IPC. The workload is idle 50% time.
+	 * The start period = 1,000,000,000 * 1 / freq / 2.
+	 *		    = 500,000,000 / freq
+	 *
+	 * Usually, the branch-related events occur less than the
+	 * instructions event. According to the Intel event list JSON
+	 * file, the SAV (sample after value) of a branch-related event
+	 * is usually 1/4 of an instruction event.
+	 * The start period of branch-related events = 125,000,000 / freq.
+	 *
+	 * The cache-related events occurs even less. The SAV is usually
+	 * 1/20 of an instruction event.
+	 * The start period of cache-related events = 25,000,000 / freq.
+	 */
+	config = event->attr.config & PERF_HW_EVENT_MASK;
+	if (type == PERF_TYPE_HARDWARE) {
+		switch (config) {
+		case PERF_COUNT_HW_CPU_CYCLES:
+		case PERF_COUNT_HW_INSTRUCTIONS:
+		case PERF_COUNT_HW_BUS_CYCLES:
+		case PERF_COUNT_HW_STALLED_CYCLES_FRONTEND:
+		case PERF_COUNT_HW_STALLED_CYCLES_BACKEND:
+		case PERF_COUNT_HW_REF_CPU_CYCLES:
+			factor = 500000000;
+			break;
+		case PERF_COUNT_HW_BRANCH_INSTRUCTIONS:
+		case PERF_COUNT_HW_BRANCH_MISSES:
+			factor = 125000000;
+			break;
+		case PERF_COUNT_HW_CACHE_REFERENCES:
+		case PERF_COUNT_HW_CACHE_MISSES:
+			factor = 25000000;
+			break;
+		default:
+			goto end;
+		}
+	}
+
+	if (type == PERF_TYPE_HW_CACHE)
+		factor = 25000000;
+end:
+	/*
+	 * Usually, a prime or a number with less factors (close to prime)
+	 * is chosen as an SAV, which makes it less likely that the sampling
+	 * period synchronizes with some periodic event in the workload.
+	 * Minus 1 to make it at least avoiding values near power of twos
+	 * for the default freq.
+	 */
+	start = DIV_ROUND_UP_ULL(factor, event->attr.sample_freq) - 1;
+
+	if (start > x86_pmu.max_period)
+		start = x86_pmu.max_period;
+
+	if (x86_pmu.limit_period)
+		x86_pmu.limit_period(event, &start);
+
+	return start;
+}
+
 static int intel_pmu_hw_config(struct perf_event *event)
 {
 	int ret = x86_pmu_hw_config(event);

@@ -3960,6 +4039,12 @@ static int intel_pmu_hw_config(struct perf_event *event)
 	if (ret)
 		return ret;
 
+	if (event->attr.freq && event->attr.sample_freq) {
+		event->hw.sample_period = intel_pmu_freq_start_period(event);
+		event->hw.last_period = event->hw.sample_period;
+		local64_set(&event->hw.period_left, event->hw.sample_period);
+	}
+
 	if (event->attr.precise_ip) {
 		if ((event->attr.config & INTEL_ARCH_EVENT_MASK) == INTEL_FIXED_VLBR_EVENT)
 			return -EINVAL;

index 59d23cdf4ed0f..dd8748c45529a 100644
@@ -2,6 +2,7 @@
 /*
  * Architecture specific OF callbacks.
  */
+#include <linux/acpi.h>
 #include <linux/export.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>

@@ -313,6 +314,6 @@ void __init x86_flattree_get_config(void)
 	if (initial_dtb)
 		early_memunmap(dt, map_len);
 #endif
-	if (of_have_populated_dt())
+	if (acpi_disabled && of_have_populated_dt())
 		x86_init.mpparse.parse_smp_cfg = x86_dtb_parse_smp_config;
 }

index 385e3a5fc3045..feca4f20b06aa 100644
@@ -25,8 +25,10 @@
 #include <asm/posted_intr.h>
 #include <asm/irq_remapping.h>
 
+#if defined(CONFIG_X86_LOCAL_APIC) || defined(CONFIG_X86_THERMAL_VECTOR)
 #define CREATE_TRACE_POINTS
 #include <asm/trace/irq_vectors.h>
+#endif
 
 DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 EXPORT_PER_CPU_SYMBOL(irq_stat);

index a8defc813c369..7e493963d0576 100644
@@ -796,6 +796,7 @@ static const struct x86_cpu_id rapl_model_match[] __initconst = {
 	X86_MATCH_VFM(INTEL_METEORLAKE_L,	&model_skl),
 	X86_MATCH_VFM(INTEL_ARROWLAKE_H,	&model_skl),
 	X86_MATCH_VFM(INTEL_ARROWLAKE,		&model_skl),
+	X86_MATCH_VFM(INTEL_ARROWLAKE_U,	&model_skl),
 	X86_MATCH_VFM(INTEL_LUNARLAKE_M,	&model_skl),
 	{},
 };

index b70a303e08287..7e2f70f22b05b 100644
@@ -1194,6 +1194,8 @@ static inline void __mptcp_do_fallback(struct mptcp_sock *msk)
 		pr_debug("TCP fallback already done (msk=%p)\n", msk);
 		return;
 	}
+	if (WARN_ON_ONCE(!READ_ONCE(msk->allow_infinite_fallback)))
+		return;
 	set_bit(MPTCP_FALLBACK_DONE, &msk->flags);
 }
 

index 8d5c9c74cbb90..eac0d1d2dbda2 100644
@@ -775,7 +775,6 @@ nouveau_connector_force(struct drm_connector *connector)
 	if (!nv_encoder) {
 		NV_ERROR(drm, "can't find encoder to force %s on!\n",
 			 connector->name);
-		connector->status = connector_status_disconnected;
 		return;
 	}
 

index 2b09714761c62..7f755270ff1ce 100644
@@ -4610,7 +4610,7 @@ static inline void ____napi_schedule(struct softnet_data *sd,
 	 * we have to raise NET_RX_SOFTIRQ.
 	 */
 	if (!sd->in_net_rx_action)
-		__raise_softirq_irqoff(NET_RX_SOFTIRQ);
+		raise_softirq_irqoff(NET_RX_SOFTIRQ);
 }
 
 #ifdef CONFIG_RPS

index d5bdc31d88d32..f54e8572affc1 100644
@@ -77,7 +77,7 @@ struct bio_slab {
 	struct kmem_cache *slab;
 	unsigned int slab_ref;
 	unsigned int slab_size;
-	char name[8];
+	char name[12];
 };
 static DEFINE_MUTEX(bio_slab_lock);
 static DEFINE_XARRAY(bio_slabs);

index e102505735a7b..0e6bf24093f75 100644
@@ -7435,7 +7435,7 @@ static void kvm_mmu_start_lpage_recovery(struct once *once)
 				      kvm_nx_huge_page_recovery_worker_kill,
 				      kvm, "kvm-nx-lpage-recovery");
 
-	if (!nx_thread)
+	if (IS_ERR(nx_thread))
 		return;
 
 	vhost_task_start(nx_thread);

index 9ac25d08f473e..63612faeab727 100644
@@ -666,7 +666,7 @@ static struct vhost_worker *vhost_worker_create(struct vhost_dev *dev)
 
 	vtsk = vhost_task_create(vhost_run_work_list, vhost_worker_killed,
 				 worker, name);
-	if (!vtsk)
+	if (IS_ERR(vtsk))
 		goto free_worker;
 
 	mutex_init(&worker->mutex);

index 8800f5acc0071..2ef2e1b800916 100644
@@ -133,7 +133,7 @@ struct vhost_task *vhost_task_create(bool (*fn)(void *),
 
 	vtsk = kzalloc(sizeof(*vtsk), GFP_KERNEL);
 	if (!vtsk)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	init_completion(&vtsk->exited);
 	mutex_init(&vtsk->exit_mutex);
 	vtsk->data = arg;

@@ -145,7 +145,7 @@ struct vhost_task *vhost_task_create(bool (*fn)(void *),
 	tsk = copy_process(NULL, 0, NUMA_NO_NODE, &args);
 	if (IS_ERR(tsk)) {
 		kfree(vtsk);
-		return NULL;
+		return ERR_PTR(PTR_ERR(tsk));
 	}
 
 	vtsk->task = tsk;

@@ -165,7 +165,7 @@ struct goodix_berlin_core {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regulator *avdd;
-	struct regulator *iovdd;
+	struct regulator *vddio;
 	struct gpio_desc *reset_gpio;
 	struct touchscreen_properties props;
 	struct goodix_berlin_fw_version fw_version;

@@ -248,19 +248,19 @@ static int goodix_berlin_power_on(struct
 {
 	int error;
 
-	error = regulator_enable(cd->iovdd);
+	error = regulator_enable(cd->vddio);
 	if (error) {
-		dev_err(cd->dev, "Failed to enable iovdd: %d\n", error);
+		dev_err(cd->dev, "Failed to enable vddio: %d\n", error);
 		return error;
 	}
 
-	/* Vendor waits 3ms for IOVDD to settle */
+	/* Vendor waits 3ms for VDDIO to settle */
 	usleep_range(3000, 3100);
 
 	error = regulator_enable(cd->avdd);
 	if (error) {
 		dev_err(cd->dev, "Failed to enable avdd: %d\n", error);
-		goto err_iovdd_disable;
+		goto err_vddio_disable;
 	}
 
 	/* Vendor waits 15ms for IOVDD to settle */

@@ -283,8 +283,8 @@ static int goodix_berlin_power_on(struct
 err_dev_reset:
 	gpiod_set_value_cansleep(cd->reset_gpio, 1);
 	regulator_disable(cd->avdd);
-err_iovdd_disable:
-	regulator_disable(cd->iovdd);
+err_vddio_disable:
+	regulator_disable(cd->vddio);
 	return error;
 }
 

@@ -292,7 +292,7 @@ static void goodix_berlin_power_off(stru
 {
 	gpiod_set_value_cansleep(cd->reset_gpio, 1);
 	regulator_disable(cd->avdd);
-	regulator_disable(cd->iovdd);
+	regulator_disable(cd->vddio);
 }
 
 static int goodix_berlin_read_version(struct goodix_berlin_core *cd)

@@ -744,10 +744,10 @@ int goodix_berlin_probe(struct device *d
 		return dev_err_probe(dev, PTR_ERR(cd->avdd),
 				     "Failed to request avdd regulator\n");
 
-	cd->iovdd = devm_regulator_get(dev, "iovdd");
-	if (IS_ERR(cd->iovdd))
-		return dev_err_probe(dev, PTR_ERR(cd->iovdd),
-				     "Failed to request iovdd regulator\n");
+	cd->vddio = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(cd->vddio))
+		return dev_err_probe(dev, PTR_ERR(cd->vddio),
+				     "Failed to request vddio regulator\n");
 
 	error = goodix_berlin_power_on(cd);
 	if (error) {

@@ -1021,7 +1021,7 @@ static int ads7846_setup_pendown(struct
 	if (pdata->get_pendown_state) {
 		ts->get_pendown_state = pdata->get_pendown_state;
 	} else {
-		ts->gpio_pendown = gpiod_get(&spi->dev, "pendown", GPIOD_IN);
+		ts->gpio_pendown = devm_gpiod_get(&spi->dev, "pendown", GPIOD_IN);
 		if (IS_ERR(ts->gpio_pendown)) {
 			dev_err(&spi->dev, "failed to request pendown GPIO\n");
 			return PTR_ERR(ts->gpio_pendown);

@@ -100,11 +100,11 @@ enum iqs7222_reg_key_id {
 
 enum iqs7222_reg_grp_id {
 	IQS7222_REG_GRP_STAT,
-	IQS7222_REG_GRP_FILT,
 	IQS7222_REG_GRP_CYCLE,
 	IQS7222_REG_GRP_GLBL,
 	IQS7222_REG_GRP_BTN,
 	IQS7222_REG_GRP_CHAN,
+	IQS7222_REG_GRP_FILT,
 	IQS7222_REG_GRP_SLDR,
 	IQS7222_REG_GRP_TPAD,
 	IQS7222_REG_GRP_GPIO,

@@ -286,6 +286,7 @@ static const struct iqs7222_event_desc i
 
 struct iqs7222_reg_grp_desc {
 	u16 base;
+	u16 val_len;
 	int num_row;
 	int num_col;
 };

@@ -342,6 +343,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAC00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -400,6 +402,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAC00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -454,6 +457,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xC400,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -496,6 +500,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xC400,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -543,6 +548,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAA00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -600,6 +606,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAA00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -656,6 +663,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAE00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -712,6 +720,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAE00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -768,6 +777,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAE00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},

@@ -1604,7 +1614,7 @@ static int iqs7222_force_comms(struct iq
 }
 
 static int iqs7222_read_burst(struct iqs7222_private *iqs7222,
-			      u16 reg, void *val, u16 num_val)
+			      u16 reg, void *val, u16 val_len)
 {
 	u8 reg_buf[sizeof(__be16)];
 	int ret, i;

@@ -1619,7 +1629,7 @@ static int iqs7222_read_burst(struct iqs
 		{
 			.addr = client->addr,
 			.flags = I2C_M_RD,
-			.len = num_val * sizeof(__le16),
+			.len = val_len,
 			.buf = (u8 *)val,
 		},
 	};

@@ -1675,7 +1685,7 @@ static int iqs7222_read_word(struct iqs7
 	__le16 val_buf;
 	int error;
 
-	error = iqs7222_read_burst(iqs7222, reg, &val_buf, 1);
+	error = iqs7222_read_burst(iqs7222, reg, &val_buf, sizeof(val_buf));
 	if (error)
 		return error;
 

@@ -1685,10 +1695,9 @@ static int iqs7222_read_word(struct iqs7
 }
 
 static int iqs7222_write_burst(struct iqs7222_private *iqs7222,
-			       u16 reg, const void *val, u16 num_val)
+			       u16 reg, const void *val, u16 val_len)
 {
 	int reg_len = reg > U8_MAX ? sizeof(reg) : sizeof(u8);
-	int val_len = num_val * sizeof(__le16);
 	int msg_len = reg_len + val_len;
 	int ret, i;
 	struct i2c_client *client = iqs7222->client;

@@ -1747,7 +1756,7 @@ static int iqs7222_write_word(struct iqs
 {
 	__le16 val_buf = cpu_to_le16(val);
 
-	return iqs7222_write_burst(iqs7222, reg, &val_buf, 1);
+	return iqs7222_write_burst(iqs7222, reg, &val_buf, sizeof(val_buf));
 }
 
 static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222)

@@ -1831,30 +1840,14 @@ static int iqs7222_dev_init(struct iqs72
 
 	/*
 	 * Acknowledge reset before writing any registers in case the device
-	 * suffers a spurious reset during initialization. Because this step
-	 * may change the reserved fields of the second filter beta register,
-	 * its cache must be updated.
-	 *
-	 * Writing the second filter beta register, in turn, may clobber the
-	 * system status register. As such, the filter beta register pair is
-	 * written first to protect against this hazard.
+	 * suffers a spurious reset during initialization.
 	 */
 	if (dir == WRITE) {
-		u16 reg = dev_desc->reg_grps[IQS7222_REG_GRP_FILT].base + 1;
-		u16 filt_setup;
-
 		error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
 					   iqs7222->sys_setup[0] |
 					   IQS7222_SYS_SETUP_ACK_RESET);
 		if (error)
 			return error;
-
-		error = iqs7222_read_word(iqs7222, reg, &filt_setup);
-		if (error)
-			return error;
-
-		iqs7222->filt_setup[1] &= GENMASK(7, 0);
-		iqs7222->filt_setup[1] |= (filt_setup & ~GENMASK(7, 0));
 	}
 
 	/*

@@ -1883,6 +1876,7 @@ static int iqs7222_dev_init(struct iqs72
 		int num_col = dev_desc->reg_grps[i].num_col;
 		u16 reg = dev_desc->reg_grps[i].base;
 		__le16 *val_buf;
+		u16 val_len = dev_desc->reg_grps[i].val_len ? : num_col * sizeof(*val_buf);
 		u16 *val;
 
 		if (!num_col)

@@ -1900,7 +1894,7 @@ static int iqs7222_dev_init(struct iqs72
 			switch (dir) {
 			case READ:
 				error = iqs7222_read_burst(iqs7222, reg,
-							   val_buf, num_col);
+							   val_buf, val_len);
 				for (k = 0; k < num_col; k++)
 					val[k] = le16_to_cpu(val_buf[k]);
 				break;

@@ -1909,7 +1903,7 @@ static int iqs7222_dev_init(struct iqs72
 				for (k = 0; k < num_col; k++)
 					val_buf[k] = cpu_to_le16(val[k]);
 				error = iqs7222_write_burst(iqs7222, reg,
-							    val_buf, num_col);
+							    val_buf, val_len);
 				break;
 
 			default:

@@ -1962,7 +1956,7 @@ static int iqs7222_dev_info(struct iqs72
 	int error, i;
 
 	error = iqs7222_read_burst(iqs7222, IQS7222_PROD_NUM, dev_id,
-				   ARRAY_SIZE(dev_id));
+				   sizeof(dev_id));
 	if (error)
 		return error;
 

@@ -2915,7 +2909,7 @@ static int iqs7222_report(struct iqs7222
 	__le16 status[IQS7222_MAX_COLS_STAT];
 
 	error = iqs7222_read_burst(iqs7222, IQS7222_SYS_STATUS, status,
-				   num_stat);
+				   num_stat * sizeof(*status));
 	if (error)
 		return error;
 

@@ -376,8 +376,10 @@ static const struct xpad_device {
 	{ 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x310a, "8BitDo Ultimate 2C Wireless Controller", 0, XTYPE_XBOX360 },
 	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
+	{ 0x2e24, 0x1688, "Hyperkin X91 X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },

@@ -389,6 +391,7 @@ static const struct xpad_device {
 	{ 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
 	{ 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE },
 	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
+	{ 0x3537, 0x1010, "GameSir G7 SE", 0, XTYPE_XBOXONE },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }

@@ -528,12 +531,12 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA controllers */
 	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
 	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
-       XPAD_XBOXONE_VENDOR(0x294b),            /* Snakebyte */
+	XPAD_XBOXONE_VENDOR(0x294b),		/* Snakebyte */
 	XPAD_XBOX360_VENDOR(0x2c22),		/* Qanba Controllers */
-	XPAD_XBOX360_VENDOR(0x2dc8),            /* 8BitDo Pro 2 Wired Controller */
-	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
-	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke Xbox One pad */
-	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir controllers */
+	XPAD_XBOX360_VENDOR(0x2dc8),		/* 8BitDo Controllers */
+	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Controllers */
+	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Controllers */
+	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
 	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	XPAD_XBOXONE_VENDOR(0x3285),		/* Nacon Evol-X */

@@ -140,6 +140,7 @@ static const struct xpad_device {
 	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+	{ 0x044f, 0xd01e, "ThrustMaster, Inc. ESWAP X 2 ELDEN RING EDITION", 0, XTYPE_XBOXONE },
 	{ 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },

@@ -177,6 +178,7 @@ static const struct xpad_device {
 	{ 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
 	{ 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
 	{ 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4503, "Mad Catz Racing Wheel", 0, XTYPE_XBOXONE },
 	{ 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },

@@ -238,6 +240,7 @@ static const struct xpad_device {
 	{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x015d, "PDP Mirror's Edge Official Wired Controller for Xbox One", XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },

@@ -276,12 +279,15 @@ static const struct xpad_device {
 	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x0151, "Hori Racing Wheel Overdrive for Xbox Series X", 0, XTYPE_XBOXONE },
+	{ 0x0f0d, 0x0152, "Hori Racing Wheel Overdrive for Xbox Series X", 0, XTYPE_XBOXONE },
 	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
+	{ 0x10f5, 0x7005, "Turtle Beach Recon Controller", 0, XTYPE_XBOXONE },
 	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
 	{ 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 },
 	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },

@@ -366,6 +372,7 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
+	{ 0x24c6, 0x581a, "ThrustMaster XB1 Classic Controller", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },

@@ -376,10 +383,12 @@ static const struct xpad_device {
 	{ 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
-	{ 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x3109, "8BitDo Ultimate Wireless Bluetooth", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x310a, "8BitDo Ultimate 2C Wireless Controller", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 },
 	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x2e24, 0x1688, "Hyperkin X91 X-Box One pad", 0, XTYPE_XBOXONE },
+	{ 0x2e95, 0x0504, "SCUF Gaming Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE },
 	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },

@@ -387,12 +396,16 @@ static const struct xpad_device {
 	{ 0x31e3, 0x1230, "Wooting Two HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0603, "Nacon Pro Compact controller for Xbox", 0, XTYPE_XBOXONE },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0614, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
 	{ 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
+	{ 0x3285, 0x0662, "Nacon Revolution5 Pro", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE },
 	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
 	{ 0x3537, 0x1010, "GameSir G7 SE", 0, XTYPE_XBOXONE },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
+	{ 0x413d, 0x2104, "Black Shark Green Ghost Gamepad", 0, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };

@@ -491,6 +504,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x03f0),		/* HP HyperX Xbox 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x03f0),		/* HP HyperX Xbox One controllers */
 	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster Xbox 360 controllers */
+	XPAD_XBOXONE_VENDOR(0x044f),		/* Thrustmaster Xbox One controllers */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft Xbox 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft Xbox One controllers */
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech Xbox 360-style controllers */

@@ -537,11 +551,13 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Controllers */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Controllers */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
+	XPAD_XBOXONE_VENDOR(0x2e95),		/* SCUF Gaming Controller */
 	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	XPAD_XBOXONE_VENDOR(0x3285),		/* Nacon Evol-X */
 	XPAD_XBOX360_VENDOR(0x3537),		/* GameSir Controllers */
 	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x413d),		/* Black Shark Green Ghost Controller */
 	{ }
 };
 

@@ -694,7 +710,9 @@ static const struct xboxone_init_packet
 	XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
 	XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_led_on),
+	XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_led_on),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_auth),
+	XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_auth),
 	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),

@@ -349,6 +349,7 @@ static const struct xpad_device {
 	{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
+	{ 0x1ee9, 0x1590, "ZOTAC Gaming Zone", 0, XTYPE_XBOX360 },
 	{ 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE },
 	{ 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE },
 	{ 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 },

@@ -538,6 +539,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
 	XPAD_XBOX360_VENDOR(0x1a86),		/* QH Electronics */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
+	XPAD_XBOX360_VENDOR(0x1ee9),		/* ZOTAC Technology Limited */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */
 	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA controllers */
 	XPAD_XBOX360_VENDOR(0x2345),		/* Machenike Controllers */

@@ -382,6 +382,7 @@ static const struct xpad_device {
 	{ 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 },
 	{ 0x294b, 0x3303, "Snakebyte GAMEPAD BASE X", 0, XTYPE_XBOXONE },
 	{ 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE },
+	{ 0x2993, 0x2001, "TECNO Pocket Go", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x3109, "8BitDo Ultimate Wireless Bluetooth", 0, XTYPE_XBOX360 },

@@ -548,6 +549,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
 	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
 	XPAD_XBOXONE_VENDOR(0x294b),		/* Snakebyte */
+	XPAD_XBOX360_VENDOR(0x2993),		/* TECNO Mobile */
 	XPAD_XBOX360_VENDOR(0x2c22),		/* Qanba Controllers */
 	XPAD_XBOX360_VENDOR(0x2dc8),		/* 8BitDo Controllers */
 	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Controllers */

@@ -312,7 +312,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
-	{ 0x1a86, 0xe310, "QH Electronics Controller", 0, XTYPE_XBOX360 },
+	{ 0x1a86, 0xe310, "Legion Go S", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },

@@ -538,7 +538,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
 	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
-	XPAD_XBOX360_VENDOR(0x1a86),		/* QH Electronics */
+	XPAD_XBOX360_VENDOR(0x1a86),		/* Nanjing Qinheng Microelectronics (WCH) */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
 	XPAD_XBOX360_VENDOR(0x1ee9),		/* ZOTAC Technology Limited */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */

@@ -1209,18 +1209,10 @@ static const struct dmi_system_id i8042_
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
 	{
-		/*
-		 * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes
-		 * the keyboard very laggy for ~5 seconds after boot and
-		 * sometimes also after resume.
-		 * However both are required for the keyboard to not fail
-		 * completely sometimes after boot or resume.
-		 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NHxxRZQ"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1261,6 +1261,12 @@ static const struct dmi_system_id i8042_
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
 	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "P640RE"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
 		/*
 		 * This is only a partial board_name and might be followed by
 		 * another letter or number. DMI_MATCH however does do partial

@@ -1337,11 +1343,35 @@ static const struct dmi_system_id i8042_
 	},
 	{
 		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB51RF"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB71RD"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PC70DR"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"),
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX_GN20"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
 	/* See comment on TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU above */
 	{
 		.matches = {

@@ -1080,16 +1080,14 @@ static const struct dmi_system_id i8042_
 			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
 			DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
 			DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/* Mivvy M310 */

@@ -1171,8 +1169,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1205,8 +1202,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1218,8 +1214,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	/*
 	 * At least one modern Clevo barebone has the touchpad connected both

@@ -1235,17 +1230,15 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
-					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
-					SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX |
+					SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
-					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
-					SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX |
+					SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1319,8 +1312,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RS"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*

@@ -1338,8 +1330,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1363,8 +1354,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1383,15 +1373,13 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*

@@ -1157,9 +1157,7 @@ static const struct dmi_system_id i8042_
 	},
 	/*
 	 * A lot of modern Clevo barebones have touchpad and/or keyboard issues
-	 * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
-	 * none of them have an external PS/2 port so this can safely be set for
-	 * all of them.
+	 * after suspend fixable with the forcenorestore quirk.
 	 * Clevo barebones come with board_vendor and/or system_vendor set to
 	 * either the very generic string "Notebook" and/or a different value
 	 * for each individual reseller. The only somewhat universal way to

@@ -1175,22 +1173,19 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1250,8 +1245,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -1268,16 +1262,14 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65xH"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/* Clevo P650RS, 650RP6, Sager NP8152-S, and others */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*

@@ -1288,8 +1280,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65_P67H"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*

@@ -1300,8 +1291,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RP"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*

@@ -1323,8 +1313,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P67xRP"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

@@ -5067,16 +5067,16 @@ static void run_state_machine(struct tcp
 		 */
 		if (port->vbus_never_low) {
 			port->vbus_never_low = false;
-			tcpm_set_state(port, SNK_SOFT_RESET,
-				       port->timings.sink_wait_cap_time);
+			upcoming_state = SNK_SOFT_RESET;
 		} else {
 			if (!port->self_powered)
 				upcoming_state = SNK_WAIT_CAPABILITIES_TIMEOUT;
 			else
 				upcoming_state = hard_reset_state(port);
-			tcpm_set_state(port, SNK_WAIT_CAPABILITIES_TIMEOUT,
-				       port->timings.sink_wait_cap_time);
 		}
+
+		tcpm_set_state(port, upcoming_state,
+			       port->timings.sink_wait_cap_time);
 		break;
 	case SNK_WAIT_CAPABILITIES_TIMEOUT:
 		/*

@@ -1079,6 +1079,20 @@ static const struct usb_device_id id_tab
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	/* GMC devices */
 	{ USB_DEVICE(GMC_VID, GMC_Z216C_PID) },
+	/* Altera USB Blaster 3 */
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6022_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6025_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 3) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6029_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 3) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602C_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 3) },
 	{ }					/* Terminating entry */
 };
 

@@ -1612,3 +1612,16 @@
  */
 #define GMC_VID				0x1cd7
 #define GMC_Z216C_PID			0x0217 /* GMC Z216C Adapter IR-USB */
+
+/*
+ *  Altera USB Blaster 3 (http://www.altera.com).
+ */
+#define ALTERA_VID			0x09fb
+#define ALTERA_UB3_6022_PID		0x6022
+#define ALTERA_UB3_6025_PID		0x6025
+#define ALTERA_UB3_6026_PID		0x6026
+#define ALTERA_UB3_6029_PID		0x6029
+#define ALTERA_UB3_602A_PID		0x602a
+#define ALTERA_UB3_602C_PID		0x602c
+#define ALTERA_UB3_602D_PID		0x602d
+#define ALTERA_UB3_602E_PID		0x602e

@@ -1388,6 +1388,22 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff),	/* Telit FN920C04 (MBIM) */
 	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x30),	/* Telit FE990B (rmnet) */
+	  .driver_info = NCTRL(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x30),	/* Telit FE990B (MBIM) */
+	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x30),	/* Telit FE990B (RNDIS) */
+	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x30),	/* Telit FE990B (ECM) */
+	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff),	/* Telit FE910C04 (rmnet) */

@@ -1368,13 +1368,13 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff),	/* Telit FN990A (PCIe) */
 	  .driver_info = RSVD(0) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff),	/* Telit FE990 (rmnet) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff),	/* Telit FE990A (rmnet) */
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff),	/* Telit FE990 (MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff),	/* Telit FE990A (MBIM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff),	/* Telit FE990 (RNDIS) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff),	/* Telit FE990A (RNDIS) */
 	  .driver_info = NCTRL(2) | RSVD(3) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff),	/* Telit FE990 (ECM) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff),	/* Telit FE990A (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff),	/* Telit FN20C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },

@@ -1410,22 +1410,22 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | NCTRL(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x60) },	/* Telit FN990B (rmnet) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30),	/* Telit FN990B (rmnet) */
 	  .driver_info = NCTRL(5) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x60) },	/* Telit FN990B (MBIM) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30),	/* Telit FN990B (MBIM) */
 	  .driver_info = NCTRL(6) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x60) },	/* Telit FN990B (RNDIS) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x30),	/* Telit FN990B (RNDIS) */
 	  .driver_info = NCTRL(6) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x60) },	/* Telit FN990B (ECM) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x30),	/* Telit FN990B (ECM) */
 	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x60) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

@@ -29,28 +29,20 @@ pub struct LockClassKey(Opaque<bindings:
 unsafe impl Sync for LockClassKey {}
 
 impl LockClassKey {
-    /// Creates a new lock class key.
-    pub const fn new() -> Self {
-        Self(Opaque::uninit())
-    }
-
     pub(crate) fn as_ptr(&self) -> *mut bindings::lock_class_key {
         self.0.get()
     }
 }
 
-impl Default for LockClassKey {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-
 /// Defines a new static lock class and returns a pointer to it.
 #[doc(hidden)]
 #[macro_export]
 macro_rules! static_lock_class {
     () => {{
-        static CLASS: $crate::sync::LockClassKey = $crate::sync::LockClassKey::new();
+        static CLASS: $crate::sync::LockClassKey =
+            // SAFETY: lockdep expects uninitialized memory when it's handed a statically allocated
+            // lock_class_key
+            unsafe { ::core::mem::MaybeUninit::uninit().assume_init() };
         &CLASS
     }};
 }

@@ -6,7 +6,7 @@
 //! usage by Rust code in the kernel and is shared by all of them.
 //!
 //! In other words, all the rest of the Rust code in the kernel (e.g. kernel
-//! modules written in Rust) depends on [`core`], [`alloc`] and this crate.
+//! modules written in Rust) depends on [`core`] and this crate.
 //!
 //! If you need a kernel C API that is not ported or wrapped yet here, then
 //! do so first instead of bypassing this crate.

@@ -15,8 +15,8 @@
 //!   - Test code should be able to define functions and call them, without having to carry
 //!     the context.
 //!
-//!   - Later on, we may want to be able to test non-kernel code (e.g. `core`, `alloc` or
-//!     third-party crates) which likely use the standard library `assert*!` macros.
+//!   - Later on, we may want to be able to test non-kernel code (e.g. `core` or third-party
+//!     crates) which likely use the standard library `assert*!` macros.
 //!
 //! For this reason, instead of the passed context, `kunit_get_current_test()` is used instead
 //! (i.e. `current->kunit_test`).

@@ -62,6 +62,24 @@ unsafe impl Allocator for Cmalloc {
             ));
         }
 
+        // ISO C (ISO/IEC 9899:2011) defines `aligned_alloc`:
+        //
+        // > The value of alignment shall be a valid alignment supported by the implementation
+        // [...].
+        //
+        // As an example of the "supported by the implementation" requirement, POSIX.1-2001 (IEEE
+        // 1003.1-2001) defines `posix_memalign`:
+        //
+        // > The value of alignment shall be a power of two multiple of sizeof (void *).
+        //
+        // and POSIX-based implementations of `aligned_alloc` inherit this requirement. At the time
+        // of writing, this is known to be the case on macOS (but not in glibc).
+        //
+        // Satisfy the stricter requirement to avoid spurious test failures on some platforms.
+        let min_align = core::mem::size_of::<*const crate::ffi::c_void>();
+        let layout = layout.align_to(min_align).map_err(|_| AllocError)?;
+        let layout = layout.pad_to_align();
+
         // SAFETY: Returns either NULL or a pointer to a memory allocation that satisfies or
         // exceeds the given size and alignment requirements.
         let dst = unsafe { libc_aligned_alloc(layout.align(), layout.size()) } as *mut u8;

@@ -1400,17 +1400,14 @@ impl_zeroable! {
     // SAFETY: `T: Zeroable` and `UnsafeCell` is `repr(transparent)`.
     {<T: ?Sized + Zeroable>} UnsafeCell<T>,
 
-    // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee).
+    // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee:
+    // https://doc.rust-lang.org/stable/std/option/index.html#representation).
     Option<NonZeroU8>, Option<NonZeroU16>, Option<NonZeroU32>, Option<NonZeroU64>,
     Option<NonZeroU128>, Option<NonZeroUsize>,
     Option<NonZeroI8>, Option<NonZeroI16>, Option<NonZeroI32>, Option<NonZeroI64>,
     Option<NonZeroI128>, Option<NonZeroIsize>,
-
-    // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee).
-    //
-    // In this case we are allowed to use `T: ?Sized`, since all zeros is the `None` variant.
-    {<T: ?Sized>} Option<NonNull<T>>,
-    {<T: ?Sized>} Option<KBox<T>>,
+    {<T>} Option<NonNull<T>>,
+    {<T>} Option<KBox<T>>,
 
     // SAFETY: `null` pointer is valid.
     //

@@ -1075,7 +1075,7 @@ static enum ucode_state load_microcode_a
 	if (ret != UCODE_OK)
 		return ret;
 
-	for_each_node(nid) {
+	for_each_node_with_cpus(nid) {
 		cpu = cpumask_first(cpumask_of_node(nid));
 		c = &cpu_data(cpu);
 

@@ -70,8 +70,7 @@
 #define INT_RX_CHANNEL_OVERFLOW		BIT(2)
 #define INT_TX_CHANNEL_UNDERRUN		BIT(3)
 
-#define INT_ENABLE_MASK (CONTROL_RX_DATA_INT | CONTROL_TX_DATA_INT | \
-			 CONTROL_RX_OVER_INT | CONTROL_TX_UNDER_INT)
+#define INT_ENABLE_MASK (CONTROL_RX_OVER_INT | CONTROL_TX_UNDER_INT)
 
 #define REG_CONTROL		(0x00)
 #define REG_FRAME_SIZE		(0x04)

@@ -133,10 +132,15 @@ static inline void mchp_corespi_disable(
 	mchp_corespi_write(spi, REG_CONTROL, control);
 }
 
-static inline void mchp_corespi_read_fifo(struct mchp_corespi *spi)
+static inline void mchp_corespi_read_fifo(struct mchp_corespi *spi, int fifo_max)
 {
-	while (spi->rx_len >= spi->n_bytes && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_RXFIFO_EMPTY)) {
-		u32 data = mchp_corespi_read(spi, REG_RX_DATA);
+	for (int i = 0; i < fifo_max; i++) {
+		u32 data;
+
+		while (mchp_corespi_read(spi, REG_STATUS) & STATUS_RXFIFO_EMPTY)
+			;
+
+		data = mchp_corespi_read(spi, REG_RX_DATA);
 
 		spi->rx_len -= spi->n_bytes;
 

@@ -211,11 +215,10 @@ static inline void mchp_corespi_set_xfer
 	mchp_corespi_write(spi, REG_FRAMESUP, len);
 }
 
-static inline void mchp_corespi_write_fifo(struct mchp_corespi *spi)
+static inline void mchp_corespi_write_fifo(struct mchp_corespi *spi, int fifo_max)
 {
-	int fifo_max, i = 0;
+	int i = 0;
 
-	fifo_max = DIV_ROUND_UP(min(spi->tx_len, FIFO_DEPTH), spi->n_bytes);
 	mchp_corespi_set_xfer_size(spi, fifo_max);
 
 	while ((i < fifo_max) && !(mchp_corespi_read(spi, REG_STATUS) & STATUS_TXFIFO_FULL)) {

@@ -413,19 +416,6 @@ static irqreturn_t mchp_corespi_interrup
 	if (intfield == 0)
 		return IRQ_NONE;
 
-	if (intfield & INT_TXDONE)
-		mchp_corespi_write(spi, REG_INT_CLEAR, INT_TXDONE);
-
-	if (intfield & INT_RXRDY) {
-		mchp_corespi_write(spi, REG_INT_CLEAR, INT_RXRDY);
-
-		if (spi->rx_len)
-			mchp_corespi_read_fifo(spi);
-	}
-
-	if (!spi->rx_len && !spi->tx_len)
-		finalise = true;
-
 	if (intfield & INT_RX_CHANNEL_OVERFLOW) {
 		mchp_corespi_write(spi, REG_INT_CLEAR, INT_RX_CHANNEL_OVERFLOW);
 		finalise = true;

@@ -512,9 +502,14 @@ static int mchp_corespi_transfer_one(str
 
 	mchp_corespi_write(spi, REG_SLAVE_SELECT, spi->pending_slave_select);
 
-	while (spi->tx_len)
-		mchp_corespi_write_fifo(spi);
+	while (spi->tx_len) {
+		int fifo_max = DIV_ROUND_UP(min(spi->tx_len, FIFO_DEPTH), spi->n_bytes);
+
+		mchp_corespi_write_fifo(spi, fifo_max);
+		mchp_corespi_read_fifo(spi, fifo_max);
+	}
 
+	spi_finalize_current_transfer(host);
 	return 1;
 }
 

@@ -7840,9 +7840,6 @@ static void intel_atomic_commit_tail(str
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	dev_priv->display.funcs.display->commit_modeset_enables(state);
 
-	if (state->modeset)
-		intel_set_cdclk_post_plane_update(state);
-
 	intel_wait_for_vblank_workers(state);
 
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here

@@ -7916,6 +7913,8 @@ static void intel_atomic_commit_tail(str
 		intel_verify_planes(state);
 
 	intel_sagv_post_plane_update(state);
+	if (state->modeset)
+		intel_set_cdclk_post_plane_update(state);
 	intel_pmdemand_post_plane_update(state);
 
 	drm_atomic_helper_commit_hw_done(&state->base);

@@ -545,7 +545,7 @@ impl EncodedMsg<'_> {
         }
         self.push(&mut offset, (MODE_STOP, 4));
 
-        let pad_offset = (offset + 7) / 8;
+        let pad_offset = offset.div_ceil(8);
         for i in pad_offset..self.version.max_data() {
             self.data[i] = PADDING[(i & 1) ^ (pad_offset & 1)];
         }

@@ -659,7 +659,7 @@ struct QrImage<'a> {
 impl QrImage<'_> {
     fn new<'a, 'b>(em: &'b EncodedMsg<'b>, qrdata: &'a mut [u8]) -> QrImage<'a> {
         let width = em.version.width();
-        let stride = (width + 7) / 8;
+        let stride = width.div_ceil(8);
         let data = qrdata;
 
         let mut qr_image = QrImage {

@@ -911,16 +911,16 @@ impl QrImage<'_> {
 ///
 /// * `url`: The base URL of the QR code. It will be encoded as Binary segment.
 /// * `data`: A pointer to the binary data, to be encoded. if URL is NULL, it
-///    will be encoded as binary segment, otherwise it will be encoded
-///    efficiently as a numeric segment, and appended to the URL.
+///   will be encoded as binary segment, otherwise it will be encoded
+///   efficiently as a numeric segment, and appended to the URL.
 /// * `data_len`: Length of the data, that needs to be encoded, must be less
-///    than data_size.
+///   than data_size.
 /// * `data_size`: Size of data buffer, it should be at least 4071 bytes to hold
-///    a V40 QR code. It will then be overwritten with the QR code image.
+///   a V40 QR code. It will then be overwritten with the QR code image.
 /// * `tmp`: A temporary buffer that the QR code encoder will use, to write the
-///    segments and ECC.
+///   segments and ECC.
 /// * `tmp_size`: Size of the temporary buffer, it must be at least 3706 bytes
-///    long for V40.
+///   long for V40.
 ///
 /// # Safety
 ///

@@ -956,6 +956,10 @@ int drm_atomic_connector_commit_dpms(str
 
 	if (mode != DRM_MODE_DPMS_ON)
 		mode = DRM_MODE_DPMS_OFF;
+
+	if (connector->dpms == mode)
+		goto out;
+
 	connector->dpms = mode;
 
 	crtc = connector->state->crtc;

@@ -1308,6 +1308,10 @@ EXPORT_SYMBOL(drm_hdmi_connector_get_out
  * 	callback. For atomic drivers the remapping to the "ACTIVE" property is
  * 	implemented in the DRM core.
  *
+ * 	On atomic drivers any DPMS setproperty ioctl where the value does not
+ * 	change is completely skipped, otherwise a full atomic commit will occur.
+ * 	On legacy drivers the exact behavior is driver specific.
+ *
  * 	Note that this property cannot be set through the MODE_ATOMIC ioctl,
  * 	userspace must use "ACTIVE" on the CRTC instead.
  *

@@ -4035,6 +4035,22 @@ out:
 	return 0;
 }
 
+static bool primary_mstb_probing_is_done(struct drm_dp_mst_topology_mgr *mgr)
+{
+	bool probing_done = false;
+
+	mutex_lock(&mgr->lock);
+
+	if (mgr->mst_primary && drm_dp_mst_topology_try_get_mstb(mgr->mst_primary)) {
+		probing_done = mgr->mst_primary->link_address_sent;
+		drm_dp_mst_topology_put_mstb(mgr->mst_primary);
+	}
+
+	mutex_unlock(&mgr->lock);
+
+	return probing_done;
+}
+
 static inline bool
 drm_dp_mst_process_up_req(struct drm_dp_mst_topology_mgr *mgr,
 			  struct drm_dp_pending_up_req *up_req)

@@ -4065,8 +4081,12 @@ drm_dp_mst_process_up_req(struct drm_dp_
 
 	/* TODO: Add missing handler for DP_RESOURCE_STATUS_NOTIFY events */
 	if (msg->req_type == DP_CONNECTION_STATUS_NOTIFY) {
-		dowork = drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat);
-		hotplug = true;
+		if (!primary_mstb_probing_is_done(mgr)) {
+			drm_dbg_kms(mgr->dev, "Got CSN before finish topology probing. Skip it.\n");
+		} else {
+			dowork = drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat);
+			hotplug = true;
+		}
 	}
 
 	drm_dp_mst_topology_put_mstb(mstb);

@@ -4148,10 +4168,11 @@ static int drm_dp_mst_handle_up_req(stru
 	drm_dp_send_up_ack_reply(mgr, mst_primary, up_req->msg.req_type,
 				 false);
 
+	drm_dp_mst_topology_put_mstb(mst_primary);
+
 	if (up_req->msg.req_type == DP_CONNECTION_STATUS_NOTIFY) {
 		const struct drm_dp_connection_status_notify *conn_stat =
 			&up_req->msg.u.conn_stat;
-		bool handle_csn;
 
 		drm_dbg_kms(mgr->dev, "Got CSN: pn: %d ldps:%d ddps: %d mcs: %d ip: %d pdt: %d\n",
 			    conn_stat->port_number,

@@ -4160,16 +4181,6 @@ static int drm_dp_mst_handle_up_req(stru
 			    conn_stat->message_capability_status,
 			    conn_stat->input_port,
 			    conn_stat->peer_device_type);
-
-		mutex_lock(&mgr->probe_lock);
-		handle_csn = mst_primary->link_address_sent;
-		mutex_unlock(&mgr->probe_lock);
-
-		if (!handle_csn) {
-			drm_dbg_kms(mgr->dev, "Got CSN before finish topology probing. Skip it.");
-			kfree(up_req);
-			goto out_put_primary;
-		}
 	} else if (up_req->msg.req_type == DP_RESOURCE_STATUS_NOTIFY) {
 		const struct drm_dp_resource_status_notify *res_stat =
 			&up_req->msg.u.resource_stat;

@@ -4184,9 +4195,6 @@ static int drm_dp_mst_handle_up_req(stru
 	list_add_tail(&up_req->next, &mgr->up_req_list);
 	mutex_unlock(&mgr->up_req_lock);
 	queue_work(system_long_wq, &mgr->up_req_work);
-
-out_put_primary:
-	drm_dp_mst_topology_put_mstb(mst_primary);
 out_clear_reply:
 	reset_msg_rx_state(&mgr->up_req_recv);
 	return ret;

@@ -528,8 +528,9 @@ static void gmc_v12_0_get_vm_pte(struct
 
 	bo_adev = amdgpu_ttm_adev(bo->tbo.bdev);
 	coherent = bo->flags & AMDGPU_GEM_CREATE_COHERENT;
-	is_system = (bo->tbo.resource->mem_type == TTM_PL_TT) ||
-		(bo->tbo.resource->mem_type == AMDGPU_PL_PREEMPT);
+	is_system = bo->tbo.resource &&
+		(bo->tbo.resource->mem_type == TTM_PL_TT ||
+		 bo->tbo.resource->mem_type == AMDGPU_PL_PREEMPT);
 
 	if (bo && bo->flags & AMDGPU_GEM_CREATE_GFX12_DCC)
 		*flags |= AMDGPU_PTE_DCC;

@@ -1230,11 +1230,13 @@ static int evict_process_queues_cpsch(st
 		decrement_queue_count(dqm, qpd, q);
 
 		if (dqm->dev->kfd->shared_resources.enable_mes) {
-			retval = remove_queue_mes(dqm, q, qpd);
-			if (retval) {
+			int err;
+
+			err = remove_queue_mes(dqm, q, qpd);
+			if (err) {
 				dev_err(dev, "Failed to evict queue %d\n",
 					q->properties.queue_id);
-				goto out;
+				retval = err;
 			}
 		}
 	}

index c633b7ff2943..09fd6ef99b3d 100644
@@ -284,7 +284,7 @@ static int vce_v2_0_stop(struct amdgpu_device *adev)
 		return 0;
 	}
 
-	ip_block = amdgpu_device_ip_get_ip_block(adev, AMD_IP_BLOCK_TYPE_VCN);
+	ip_block = amdgpu_device_ip_get_ip_block(adev, AMD_IP_BLOCK_TYPE_VCE);
 	if (!ip_block)
 		return -EINVAL;
 

@@ -275,8 +275,11 @@ static int amdgpu_dm_plane_validate_dcc(
 	if (!dcc->enable)
 		return 0;
 
-	if (format >= SURFACE_PIXEL_FORMAT_VIDEO_BEGIN ||
-	    !dc->cap_funcs.get_dcc_compression_cap)
+	if (adev->family < AMDGPU_FAMILY_GC_12_0_0 &&
+	    format >= SURFACE_PIXEL_FORMAT_VIDEO_BEGIN)
+		return -EINVAL;
+
+	if (!dc->cap_funcs.get_dcc_compression_cap)
 		return -EINVAL;
 
 	input.format = format;

@@ -894,8 +894,16 @@ void amdgpu_dm_hpd_init(struct amdgpu_de
 	struct drm_device *dev = adev_to_drm(adev);
 	struct drm_connector *connector;
 	struct drm_connector_list_iter iter;
+	int irq_type;
 	int i;
 
+	/* First, clear all hpd and hpdrx interrupts */
+	for (i = DC_IRQ_SOURCE_HPD1; i <= DC_IRQ_SOURCE_HPD6RX; i++) {
+		if (!dc_interrupt_set(adev->dm.dc, i, false))
+			drm_err(dev, "Failed to clear hpd(rx) source=%d on init\n",
+				i);
+	}
+
 	drm_connector_list_iter_begin(dev, &iter);
 	drm_for_each_connector_iter(connector, &iter) {
 		struct amdgpu_dm_connector *amdgpu_dm_connector;

@@ -908,10 +916,31 @@ void amdgpu_dm_hpd_init(struct amdgpu_de
 
 		dc_link = amdgpu_dm_connector->dc_link;
 
+		/*
+		 * Get a base driver irq reference for hpd ints for the lifetime
+		 * of dm. Note that only hpd interrupt types are registered with
+		 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
+		 * hpd_rx isn't available. DM currently controls hpd_rx
+		 * explicitly with dc_interrupt_set()
+		 */
 		if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
-			dc_interrupt_set(adev->dm.dc,
-					dc_link->irq_source_hpd,
-					true);
+			irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
+			/*
+			 * TODO: There's a mismatch between mode_info.num_hpd
+			 * and what bios reports as the # of connectors with hpd
+			 * sources. Since the # of hpd source types registered
+			 * with base driver == mode_info.num_hpd, we have to
+			 * fallback to dc_interrupt_set for the remaining types.
+			 */
+			if (irq_type < adev->mode_info.num_hpd) {
+				if (amdgpu_irq_get(adev, &adev->hpd_irq, irq_type))
+					drm_err(dev, "DM_IRQ: Failed get HPD for source=%d)!\n",
+						dc_link->irq_source_hpd);
+			} else {
+				dc_interrupt_set(adev->dm.dc,
+						 dc_link->irq_source_hpd,
+						 true);
+			}
 		}
 
 		if (dc_link->irq_source_hpd_rx != DC_IRQ_SOURCE_INVALID) {

@@ -921,12 +950,6 @@ void amdgpu_dm_hpd_init(struct amdgpu_de
 		}
 	}
 	drm_connector_list_iter_end(&iter);
-
-	/* Update reference counts for HPDs */
-	for (i = DC_IRQ_SOURCE_HPD1; i <= adev->mode_info.num_hpd; i++) {
-		if (amdgpu_irq_get(adev, &adev->hpd_irq, i - DC_IRQ_SOURCE_HPD1))
-			drm_err(dev, "DM_IRQ: Failed get HPD for source=%d)!\n", i);
-	}
 }
 
 /**

@@ -942,7 +965,7 @@ void amdgpu_dm_hpd_fini(struct amdgpu_de
 	struct drm_device *dev = adev_to_drm(adev);
 	struct drm_connector *connector;
 	struct drm_connector_list_iter iter;
-	int i;
+	int irq_type;
 
 	drm_connector_list_iter_begin(dev, &iter);
 	drm_for_each_connector_iter(connector, &iter) {

@@ -956,9 +979,18 @@ void amdgpu_dm_hpd_fini(struct amdgpu_de
 		dc_link = amdgpu_dm_connector->dc_link;
 
 		if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
-			dc_interrupt_set(adev->dm.dc,
-					dc_link->irq_source_hpd,
-					false);
+			irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
+
+			/* TODO: See same TODO in amdgpu_dm_hpd_init() */
+			if (irq_type < adev->mode_info.num_hpd) {
+				if (amdgpu_irq_put(adev, &adev->hpd_irq, irq_type))
+					drm_err(dev, "DM_IRQ: Failed put HPD for source=%d!\n",
+						dc_link->irq_source_hpd);
+			} else {
+				dc_interrupt_set(adev->dm.dc,
+						 dc_link->irq_source_hpd,
+						 false);
+			}
 		}
 
 		if (dc_link->irq_source_hpd_rx != DC_IRQ_SOURCE_INVALID) {

@@ -968,10 +1000,4 @@ void amdgpu_dm_hpd_fini(struct amdgpu_de
 		}
 	}
 	drm_connector_list_iter_end(&iter);
-
-	/* Update reference counts for HPDs */
-	for (i = DC_IRQ_SOURCE_HPD1; i <= adev->mode_info.num_hpd; i++) {
-		if (amdgpu_irq_put(adev, &adev->hpd_irq, i - DC_IRQ_SOURCE_HPD1))
-			drm_err(dev, "DM_IRQ: Failed put HPD for source=%d!\n", i);
-	}
 }

@@ -4848,6 +4848,7 @@ amdgpu_dm_register_backlight_device(stru
 	dm->backlight_dev[aconnector->bl_idx] =
 		backlight_device_register(bl_name, aconnector->base.kdev, dm,
 					  &amdgpu_dm_backlight_ops, &props);
+	dm->brightness[aconnector->bl_idx] = props.brightness;
 
 	if (IS_ERR(dm->backlight_dev[aconnector->bl_idx])) {
 		DRM_ERROR("DM: Backlight registration failed!\n");

@@ -4915,7 +4916,6 @@ static void setup_backlight_device(struc
 	aconnector->bl_idx = bl_idx;
 
 	amdgpu_dm_update_backlight_caps(dm, bl_idx);
-	dm->brightness[bl_idx] = AMDGPU_MAX_BL_LEVEL;
 	dm->backlight_link[bl_idx] = link;
 	dm->num_of_edps++;
 

@@ -239,6 +239,7 @@ static const struct timing_generator_fun
 				dce60_timing_generator_enable_advanced_request,
 		.configure_crc = dce60_configure_crc,
 		.get_crc = dce110_get_crc,
+		.is_two_pixels_per_container = dce110_is_two_pixels_per_container,
 };
 
 void dce60_timing_generator_construct(

@@ -244,6 +244,10 @@ static int amdgpu_dm_atomic_check(struct
 static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector);
 static void handle_hpd_rx_irq(void *param);
 
+static void amdgpu_dm_backlight_set_level(struct amdgpu_display_manager *dm,
+					 int bl_idx,
+					 u32 user_brightness);
+
 static bool
 is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state,
 				 struct drm_crtc_state *new_crtc_state);

@@ -3318,6 +3322,12 @@ static int dm_resume(struct amdgpu_ip_bl
 
 		mutex_unlock(&dm->dc_lock);
 
+		/* set the backlight after a reset */
+		for (i = 0; i < dm->num_of_edps; i++) {
+			if (dm->backlight_dev[i])
+				amdgpu_dm_backlight_set_level(dm, i, dm->brightness[i]);
+		}
+
 		return 0;
 	}
 	/* Recreate dc_state - DC invalidates it when setting power state to S3. */

@@ -3389,10 +3389,13 @@ static int get_norm_pix_clk(const struct
 			break;
 		case COLOR_DEPTH_121212:
 			normalized_pix_clk = (pix_clk * 36) / 24;
-		break;
+			break;
+		case COLOR_DEPTH_141414:
+			normalized_pix_clk = (pix_clk * 42) / 24;
+			break;
 		case COLOR_DEPTH_161616:
 			normalized_pix_clk = (pix_clk * 48) / 24;
-		break;
+			break;
 		default:
 			ASSERT(0);
 		break;

@@ -455,6 +455,7 @@ void hdcp_destroy(struct kobject *kobj,
 	for (i = 0; i < hdcp_work->max_link; i++) {
 		cancel_delayed_work_sync(&hdcp_work[i].callback_dwork);
 		cancel_delayed_work_sync(&hdcp_work[i].watchdog_timer_dwork);
+		cancel_delayed_work_sync(&hdcp_work[i].property_validate_dwork);
 	}
 
 	sysfs_remove_bin_file(kobj, &hdcp_work[0].attr);

@@ -26,7 +26,6 @@ struct ksmbd_work *ksmbd_alloc_work_stru
 		INIT_LIST_HEAD(&work->request_entry);
 		INIT_LIST_HEAD(&work->async_request_entry);
 		INIT_LIST_HEAD(&work->fp_entry);
-		INIT_LIST_HEAD(&work->interim_entry);
 		INIT_LIST_HEAD(&work->aux_read_list);
 		work->iov_alloc_cnt = 4;
 		work->iov = kcalloc(work->iov_alloc_cnt, sizeof(struct kvec),

@@ -56,8 +55,6 @@ void ksmbd_free_work_struct(struct ksmbd
 	kfree(work->tr_buf);
 	kvfree(work->request_buf);
 	kfree(work->iov);
-	if (!list_empty(&work->interim_entry))
-		list_del(&work->interim_entry);
 
 	if (work->async_id)
 		ksmbd_release_id(&work->conn->async_ida, work->async_id);

@@ -89,7 +89,6 @@ struct ksmbd_work {
 	/* List head at conn->async_requests */
 	struct list_head                async_request_entry;
 	struct list_head                fp_entry;
-	struct list_head                interim_entry;
 };
 
 /**

@@ -46,7 +46,6 @@ static struct oplock_info *alloc_opinfo(
 	opinfo->fid = id;
 	opinfo->Tid = Tid;
 	INIT_LIST_HEAD(&opinfo->op_entry);
-	INIT_LIST_HEAD(&opinfo->interim_list);
 	init_waitqueue_head(&opinfo->oplock_q);
 	init_waitqueue_head(&opinfo->oplock_brk);
 	atomic_set(&opinfo->refcount, 1);

@@ -803,7 +802,6 @@ out:
 static int smb2_lease_break_noti(struct oplock_info *opinfo)
 {
 	struct ksmbd_conn *conn = opinfo->conn;
-	struct list_head *tmp, *t;
 	struct ksmbd_work *work;
 	struct lease_break_info *br_info;
 	struct lease *lease = opinfo->o_lease;

@@ -831,16 +829,6 @@ static int smb2_lease_break_noti(struct
 	work->sess = opinfo->sess;
 
 	if (opinfo->op_state == OPLOCK_ACK_WAIT) {
-		list_for_each_safe(tmp, t, &opinfo->interim_list) {
-			struct ksmbd_work *in_work;
-
-			in_work = list_entry(tmp, struct ksmbd_work,
-					     interim_entry);
-			setup_async_work(in_work, NULL, NULL);
-			smb2_send_interim_resp(in_work, STATUS_PENDING);
-			list_del_init(&in_work->interim_entry);
-			release_async_work(in_work);
-		}
 		INIT_WORK(&work->work, __smb2_lease_break_noti);
 		ksmbd_queue_work(work);
 		wait_for_break_ack(opinfo);

@@ -871,7 +859,8 @@ static void wait_lease_breaking(struct o
 	}
 }
 
-static int oplock_break(struct oplock_info *brk_opinfo, int req_op_level)
+static int oplock_break(struct oplock_info *brk_opinfo, int req_op_level,
+			struct ksmbd_work *in_work)
 {
 	int err = 0;
 

@@ -914,9 +903,15 @@ static int oplock_break(struct oplock_in
 		}
 
 		if (lease->state & (SMB2_LEASE_WRITE_CACHING_LE |
-				SMB2_LEASE_HANDLE_CACHING_LE))
+				SMB2_LEASE_HANDLE_CACHING_LE)) {
+			if (in_work) {
+				setup_async_work(in_work, NULL, NULL);
+				smb2_send_interim_resp(in_work, STATUS_PENDING);
+				release_async_work(in_work);
+			}
+
 			brk_opinfo->op_state = OPLOCK_ACK_WAIT;
-		else
+		} else
 			atomic_dec(&brk_opinfo->breaking_cnt);
 	} else {
 		err = oplock_break_pending(brk_opinfo, req_op_level);