Skip to contentSkip to conversation

Add Meta(Facebook) Ventura BMC(AST2600)

PATCH Superseded Jason Hsu 3 participants 6 messages Mar 21, 2025 – Mar 24, 2025

Subsystems (2)

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Jason Hsu

author
#0 lore raw

v5 cover Add Meta(Facebook) Ventura BMC(AST2600)

Add Linux device tree entry related to Meta(Facebook) Ventura specific devices connected to BMC(AST2600) SoC.

---
v1:
1. Create ventura dts file.
2. Add commit msg.
3. Use format-patch to generate patch.
4. Add subject prefixes matching the subsystem.
---
v2:
1. Modify email content.
---
v3:
1. Add mail list.
---
v4:
1. Apply git send-email --thread option.
2. Sort nodes in the dts alphanumerically.
---
v5:
1. Run scripts/checkpatch.pl and fix reported warnings.
2. Remove unnecessary 88E6393X CONFIG FRU.
---
v6:
1. Add a new stage for the DTS change.
2. Run scripts/checkpatch.pl and fix reported error.
3. Fix the issue in a separate patch.
---

Jason Hsu (2):
dt-bindings: arm: aspeed: add Meta Ventura board
ARM: dts: aspeed: ventura: add Meta Ventura BMC

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-facebook-ventura.dts    | 1399 +++++++++++++++++
 3 files changed, 1401 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts

base-commit: b3ee1e4609512dfff642a96b34d7e5dfcdc92d05

Signature · 1 line
2.34.1
author
#1 lore raw

PATCH v6 1/2 dt-bindings: arm: aspeed: add Meta Ventura board

Document the new compatibles used on Meta Ventura. Add subject prefix for the patch.

---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +1 -0
index 01333ac111fb..a86b411df9a5 100644
@@ -87,6 +87,7 @@ properties:
               - facebook,greatlakes-bmc
               - facebook,harma-bmc
               - facebook,minerva-cmc
+              - facebook,ventura-rmc
               - facebook,yosemite4-bmc
               - ibm,blueridge-bmc
               - ibm,everest-bmc

--
2.34.1

maintainer
#2 lore raw

Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: add Meta Ventura board

Quoted 4 lines · Jason Hsu

Document the new compatibles used on Meta Ventura. Add subject prefix for the patch.

The author and Sob don't match. You need to fix your git author to your quantatw.com address.

Quoted 19 lines
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +1 -1
index 01333ac111fb..a86b411df9a5 100644
@@ -87,6 +87,7 @@ properties:
               - facebook,greatlakes-bmc
               - facebook,harma-bmc
               - facebook,minerva-cmc
+              - facebook,ventura-rmc
               - facebook,yosemite4-bmc
               - ibm,blueridge-bmc
               - ibm,everest-bmc
--

2.34.1

author
#3 lore raw

PATCH v6 2/2 ARM: dts: aspeed: ventura: add Meta Ventura BMC

In reply to Jason Hsu

Add Linux device tree related to Meta(Facebook) Ventura specific devices connected to BMC(AST2600) SoC. Add subject prefix for the patch.

---
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-facebook-ventura.dts    | 1399 +++++++++++++++++
 2 files changed, 1400 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
arch/arm/boot/dts/aspeed/Makefile +1 -0
index 2e5f4833a073..e07666d902fb 100644
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-minerva.dtb \
 	aspeed-bmc-facebook-minipack.dtb \
 	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-ventura.dtb \
 	aspeed-bmc-facebook-wedge40.dtb \
 	aspeed-bmc-facebook-wedge100.dtb \
 	aspeed-bmc-facebook-wedge400.dtb \
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +1399 -0

1,399 lines not on this page · raw message

--
2.34.1

maintainer
#4 lore raw

Re: [PATCH v6 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC

Quoted 2 lines · Jason Hsu

+               led-84 {

Lots of LEDs!

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts line 579

Quoted 12 lines

+                       label = "compute18_led_amber";
+                       default-state = "off";
+                       gpios = <&tray_leds_g1_gpio 0 GPIO_ACTIVE_LOW>; +               };
+       };

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +7 -0
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+    p1v8_bmc_aux: regulator-p1v8-bmc-aux {

The indentation is broken here and in other places below. Can you please fix it up?

Quoted 328 lines

+               compatible = "regulator-fixed"; +               regulator-name = "p1v8_bmc_aux"; +               regulator-min-microvolt = <1800000>; +               regulator-max-microvolt = <1800000>; +               regulator-always-on;
+       };

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +322 -0
+
+       p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+               compatible = "regulator-fixed";
+               regulator-name = "p2v5_bmc_aux";
+               regulator-min-microvolt = <2500000>;
+               regulator-max-microvolt = <2500000>;
+               regulator-always-on;
+       };
+
+    spi1_gpio: spi {
+               compatible = "spi-gpio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+               mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+               miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+               cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+               num-chipselects = <1>;
+
+               tpm@0 {
+                       compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+                       spi-max-frequency = <33000000>;
+                       reg = <0>;
+               };
+       };
+};
+
+&adc0 {
+       vref-supply = <&p1v8_bmc_aux>;
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+               &pinctrl_adc2_default &pinctrl_adc3_default
+               &pinctrl_adc4_default &pinctrl_adc5_default
+               &pinctrl_adc6_default &pinctrl_adc7_default>;
+
+};
+
+&adc1 {
+       vref-supply = <&p2v5_bmc_aux>;
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&fmc {
+       status = "okay";
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+       };
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "alt-bmc";
+               spi-max-frequency = <50000000>;
+       };
+};
+
+&i2c0 {
+       status = "okay";
+
+       i2c-mux@77 {
+               compatible = "nxp,pca9548";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c0mux0ch0: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+                       status = "okay";
+               };
+
+               i2c0mux0ch1: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+                       status = "okay";
+               };
+
+               i2c0mux0ch2: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+                       status = "okay";
+               };
+
+               i2c0mux0ch3: i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <3>;
+                       status = "okay";
+               };
+
+               i2c0mux0ch4: i2c@4 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <4>;
+                       status = "okay";
+               };
+
+               i2c0mux0ch5: i2c@5 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <5>;
+                       status = "okay";
+               };
+
+               i2c0mux0ch6: i2c@6 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <6>;
+                       status = "okay";
+               };
+
+               i2c0mux0ch7: i2c@7 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <7>;
+                       status = "okay";
+               };
+       };
+};
+
+&i2c1 {
+       status = "okay";
+
+       i2c-mux@77 {
+               compatible = "nxp,pca9548";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c1mux0ch0: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+                       status = "okay";
+               };
+
+               i2c1mux0ch1: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+                       status = "okay";
+               };
+
+               i2c1mux0ch2: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+                       status = "okay";
+               };
+
+               i2c1mux0ch3: i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <3>;
+                       status = "okay";
+               };
+
+               i2c1mux0ch4: i2c@4 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <4>;
+                       status = "okay";
+               };
+
+               i2c1mux0ch5: i2c@5 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <5>;
+                       status = "okay";
+               };
+
+               i2c1mux0ch6: i2c@6 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <6>;
+                       status = "okay";
+               };
+
+               i2c1mux0ch7: i2c@7 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <7>;
+                       status = "okay";
+               };
+       };
+};
+
+&i2c2 {
+       status = "okay";
+
+       i2c-mux@77 {
+               compatible = "nxp,pca9548";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c2mux0ch0: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+                       status = "okay";
+               };
+
+               i2c2mux0ch1: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+                       status = "okay";
+               };
+
+               i2c2mux0ch2: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+                       status = "okay";
+               };
+
+               i2c2mux0ch3: i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <3>;
+                       status = "okay";
+               };
+
+               i2c2mux0ch4: i2c@4 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <4>;
+                       status = "okay";
+               };
+
+               i2c2mux0ch5: i2c@5 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <5>;
+                       status = "okay";
+               };
+
+               i2c2mux0ch6: i2c@6 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <6>;
+                       status = "okay";
+               };
+
+               i2c2mux0ch7: i2c@7 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <7>;
+                       status = "okay";
+               };
+       };
+};
+
+&i2c3 {
+       status = "okay";
+
+       i2c-mux@77 {
+               compatible = "nxp,pca9548";
+               reg = <0x77>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               i2c3mux0ch0: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+                       status = "okay";
+               };
+
+               i2c3mux0ch1: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+                       status = "okay";
+               };
+
+               i2c3mux0ch2: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+                       status = "okay";
+               };
+
+               i2c3mux0ch3: i2c@3 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <3>;
+
+                       // Fan Board 0 FRU
+                       eeprom@56 {
+                               compatible = "atmel,24c128";
+                               reg = <0x56>;
+                       };
+
+                       fan_leds_g1_gpio: gpio@21 {
+                               compatible = "nxp,pca9555";
+                               reg = <0x21>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                       };
+

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts line 917

Quoted 10 lines
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +10 -0
+                       adc@1f {
+                               compatible = "ti,adc128d818";
+                               reg = <0x1f>;
+                               ti,mode = /bits/ 8 <1>;
+                       };
+
+                       adc@35 {
+                               compatible = "maxim,max11617";
+                               reg = <0x35>;
+                       };

(All) nodes should be in increasing order of address, or ordered alphabetically otherwise:

https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-nodes

Can you please fix this throughout the patch?

Quoted 28 lines

+               };

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +27 -0
+
+               i2c3mux0ch4: i2c@4 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <4>;
+
+                       // Fan Board 1 FRU
+                       eeprom@56 {
+                               compatible = "atmel,24c128";
+                               reg = <0x56>;
+                       };
+
+                       gpio@21 {
+                               compatible = "nxp,pca9555";
+                               reg = <0x21>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                       };
+
+                       adc@1f {
+                               compatible = "ti,adc128d818";
+                               reg = <0x1f>;
+                               ti,mode = /bits/ 8 <1>;
+                       };
+
+                       adc@35 {
+                               compatible = "maxim,max11617";

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts line 955

Quoted 10 lines
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +10 -0
+                               reg = <0x35>;
+                       };
+               };
+
+               i2c3mux0ch5: i2c@5 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <5>;
+
+                       hwmon: hwmon@23 {

I've said elsewhere that I don't think hwmon is the right node name:

https://lore.kernel.org/all/26a1d17c47c5ca6036dd58ac3b953daeec9f5ef8.camel@codeconstruct.com.au/

Quoted 72 lines

+                               compatible = "nuvoton,nct7363"; +                               reg = <0x23>;
+                               #pwm-cells = <2>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +69 -0
+
+                               //fan 0 IL
+                               fan-0 {
+                                       pwms = <&hwmon 0 20000>;
+                                       tach-ch = /bits/ 8 <0x09>;
+                               };
+
+                               //fan 0 OL
+                               fan-1 {
+                                       pwms = <&hwmon 0 20000>;
+                                       tach-ch = /bits/ 8 <0x0B>;
+                               };
+
+                               //fan 1 IL
+                               fan-2 {
+                                       pwms = <&hwmon 4 20000>;
+                                       tach-ch = /bits/ 8 <0x0A>;
+                               };
+
+                               //fan 1 OL
+                               fan-3 {
+                                       pwms = <&hwmon 4 20000>;
+                                       tach-ch = /bits/ 8 <0x0D>;
+                               };
+
+                               //fan 2 IL
+                               fan-4 {
+                                       pwms = <&hwmon 6 20000>;
+                                       tach-ch = /bits/ 8 <0x0F>;
+                               };
+
+                               //fan 2 OL
+                               fan-5 {
+                                       pwms = <&hwmon 6 20000>;
+                                       tach-ch = /bits/ 8 <0x01>;
+                               };
+
+                               //fan 3 IL
+                               fan-6 {
+                                       pwms = <&hwmon 10 20000>;
+                                       tach-ch = /bits/ 8 <0x00>;
+                               };
+
+                               //fan 3 OL
+                               fan-7 {
+                                       pwms = <&hwmon 10 20000>;
+                                       tach-ch = /bits/ 8 <0x03>;
+                               };
+                       };
+               };
+
+               i2c3mux0ch6: i2c@6 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <6>;
+                       // REAR-IO Board FRU
+                       eeprom@56 {
+                               compatible = "atmel,24c128";
+                               reg = <0x56>;
+                       };
+               };
+
+               i2c3mux0ch7: i2c@7 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <7>;
+                       status = "okay";
+               };
+       };

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts line 1037

Quoted 10 lines
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +10 -0
+};
+
+&i2c4 {
+       status = "okay";
+};
+
+&i2c5 {
+       status = "okay";
+
+    // VR TEMP U399

Indentation again here and below.

Quoted 147 lines

+       temperature-sensor@4c {
+               compatible = "ti,tmp75";
+               reg = <0x4c>;
+       };
+    // VR TEMP U397
+       temperature-sensor@4d {
+               compatible = "ti,tmp75";
+               reg = <0x4d>;
+       };
+    // BRICK TEMP U398
+       temperature-sensor@4e {
+               compatible = "ti,tmp75";
+               reg = <0x4e>;
+       };

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +133 -0
+
+       temperature-sensor@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+    // RMC FRU
+       eeprom@54 {
+               compatible = "atmel,24c128";
+               reg = <0x54>;
+       };
+};
+
+&i2c6 {
+       status = "okay";
+
+       gpio@20 {
+               compatible = "nxp,pca9555";
+               reg = <0x20>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       gpio@21 {
+               compatible = "nxp,pca9555";
+               reg = <0x21>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       gpio@22 {
+               compatible = "nxp,pca9555";
+               reg = <0x22>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       rtc@51 {
+               compatible = "nxp,pcf8563";
+               reg = <0x51>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+};
+
+&i2c9 {
+       status = "okay";
+
+    // SCM TEMP SENSOR
+       temperature-sensor@4b {
+               compatible = "ti,tmp75";
+               reg = <0x4b>;
+       };
+
+    // SCM FRU EEPROM
+       eeprom@50 {
+               compatible = "atmel,24c128";
+               reg = <0x50>;
+       };
+
+    // BSM FRU EEPROM
+       eeprom@56 {
+               compatible = "atmel,24c64";
+               reg = <0x56>;
+       };
+};
+
+&i2c10 {
+       status = "okay";
+
+       power-monitor@14 {
+               compatible = "infineon,xdp710";
+               reg = <0x14>;
+       };
+
+       power-monitor@44 {
+               compatible = "lltc,ltc4286";
+               reg = <0x44>;
+       };
+};
+
+&i2c14 {
+       status = "okay";
+};
+
+&i2c15 {
+       status = "okay";
+
+       tray_leds_g1_gpio: gpio@20 {
+               compatible = "nxp,pca9555";
+               reg = <0x20>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       tray_leds_g2_gpio: gpio@21 {
+               compatible = "nxp,pca9555";
+               reg = <0x21>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       tray_leds_g3_gpio: gpio@22 {
+               compatible = "nxp,pca9555";
+               reg = <0x22>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       tray_leds_g4_gpio: gpio@24 {
+               compatible = "nxp,pca9555";
+               reg = <0x24>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       tray_leds_g5_gpio: gpio@25 {
+               compatible = "nxp,pca9555";
+               reg = <0x25>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       tray_leds_g6_gpio: gpio@26 {
+               compatible = "nxp,pca9555";
+               reg = <0x26>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+    // LED Board FRU
+       eeprom@56 {

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts line 1194

Quoted 10 lines
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts new file +10 -0
+               compatible = "atmel,24c128";
+               reg = <0x56>;
+       };
+};
+
+&mdio0 {
+       status = "okay";
+};
+
+&mac3 {

Should probably be ordered before '&mdio0' above :)

Andrew

#5 lore raw
In reply to Jason Hsu
Quoted 42 lines · Jason Hsu

Add Linux device tree entry related to Meta(Facebook) Ventura specific devices connected to BMC(AST2600) SoC.

---
v1:
1. Create ventura dts file.
2. Add commit msg.
3. Use format-patch to generate patch.
4. Add subject prefixes matching the subsystem.
---
v2:
1. Modify email content.
---
v3:
1. Add mail list.
---
v4:
1. Apply git send-email --thread option.
2. Sort nodes in the dts alphanumerically.
---
v5:
1. Run scripts/checkpatch.pl and fix reported warnings.
2. Remove unnecessary 88E6393X CONFIG FRU.
---
v6:
1. Add a new stage for the DTS change.
2. Run scripts/checkpatch.pl and fix reported error.
3. Fix the issue in a separate patch.
---

Jason Hsu (2):
dt-bindings: arm: aspeed: add Meta Ventura board
ARM: dts: aspeed: ventura: add Meta Ventura BMC

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-facebook-ventura.dts    | 1399 +++++++++++++++++
 3 files changed, 1401 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
Quoted 6 lines

base-commit: b3ee1e4609512dfff642a96b34d7e5dfcdc92d05 --
2.34.1

My bot found new DTB warnings on the .dts files added or changed in this series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:

  pip3 install dtschema --upgrade

New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for [email protected]:

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dtb: /ahb/apb/pwm-tacho-controller@1e786000: failed to match any schema with compatible: ['aspeed,ast2500-pwm-tacho']