Skip to contentSkip to conversation

riscv: Refactor SBI FWFT lock tests

PATCH Applied Akshay Behl 2 participants 3 messages Mar 20, 2025 – Mar 22, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 riscv: Refactor SBI FWFT lock tests

This patch adds a generic function for lock tests for all the sbi fwft features. It expects the feature is already locked before being called and tests the locked feature.

---
v3:
- Fixed indentation.
- Removed unnecessary comments.
- Added locked prefix.

v2:
- Made changes to handel non boolean feature tests.

riscv/sbi-fwft.c | 50 ++++++++++++++++++++++++++++++++----------------

 1 file changed, 34 insertions(+), 16 deletions(-)
riscv/sbi-fwft.c +34 -16
index 581cbf6b..c4d0b170 100644
@@ -74,6 +74,37 @@ static void fwft_check_reset(uint32_t feature, unsigned long reset)
 	sbiret_report(&ret, SBI_SUCCESS, reset, "resets to %lu", reset);
 }
 
+/* Must be called after locking the feature using SBI_FWFT_SET_FLAG_LOCK */
+static void fwft_feature_lock_test_values(uint32_t feature, size_t nr_values,
+	unsigned long test_values[], unsigned long locked_value)
+{
+	struct sbiret ret;
+
+	report_prefix_push("locked");
+
+	for (int i = 0; i < nr_values; ++i) {
+		ret = fwft_set(feature, test_values[i], 0);
+		sbiret_report_error(&ret, SBI_ERR_DENIED_LOCKED,
+			"Set to %lu without lock flag", test_values[i]);
+
+		ret = fwft_set(feature, test_values[i], SBI_FWFT_SET_FLAG_LOCK);
+		sbiret_report_error(&ret, SBI_ERR_DENIED_LOCKED,
+			"Set to %lu with lock flag", test_values[i]);
+	}
+
+	ret = fwft_get(feature);
+	sbiret_report(&ret, SBI_SUCCESS, locked_value,
+		"Get value %lu", locked_value);
+
+	report_prefix_pop();
+}
+
+static void fwft_feature_lock_test(uint32_t feature, unsigned long locked_value)
+{
+	unsigned long values[] = {0, 1};
+	fwft_feature_lock_test_values(feature, 2, values, locked_value);
+}
+
 static void fwft_check_base(void)
 {
 	report_prefix_push("base");
@@ -181,11 +212,8 @@ static void fwft_check_misaligned_exc_deleg(void)
 	/* Lock the feature */
 	ret = fwft_misaligned_exc_set(0, SBI_FWFT_SET_FLAG_LOCK);
 	sbiret_report_error(&ret, SBI_SUCCESS, "Set misaligned deleg feature value 0 and lock");
-	ret = fwft_misaligned_exc_set(1, 0);
-	sbiret_report_error(&ret, SBI_ERR_DENIED_LOCKED,
-			    "Set locked misaligned deleg feature to new value");
-	ret = fwft_misaligned_exc_get();
-	sbiret_report(&ret, SBI_SUCCESS, 0, "Get misaligned deleg locked value 0");
+
+	fwft_feature_lock_test(SBI_FWFT_MISALIGNED_EXC_DELEG, 0);
 
 	report_prefix_pop();
 }
@@ -326,17 +354,7 @@ adue_inval_tests:
 	else
 		enabled = !enabled;
 
-	ret = fwft_set(SBI_FWFT_PTE_AD_HW_UPDATING, !enabled, 0);
-	sbiret_report_error(&ret, SBI_ERR_DENIED_LOCKED, "set locked to %d without lock", !enabled);
-
-	ret = fwft_set(SBI_FWFT_PTE_AD_HW_UPDATING, !enabled, 1);
-	sbiret_report_error(&ret, SBI_ERR_DENIED_LOCKED, "set locked to %d with lock", !enabled);
-
-	ret = fwft_set(SBI_FWFT_PTE_AD_HW_UPDATING, enabled, 0);
-	sbiret_report_error(&ret, SBI_ERR_DENIED_LOCKED, "set locked to %d without lock", enabled);
-
-	ret = fwft_set(SBI_FWFT_PTE_AD_HW_UPDATING, enabled, 1);
-	sbiret_report_error(&ret, SBI_ERR_DENIED_LOCKED, "set locked to %d with lock", enabled);
+	fwft_feature_lock_test(SBI_FWFT_PTE_AD_HW_UPDATING, enabled);
 
 adue_done:
 	install_exception_handler(EXC_LOAD_PAGE_FAULT, NULL);
Signature · 1 line
2.34.1
Applied
#1 lore raw
Quoted 22 lines · Akshay Behl

This patch adds a generic function for lock tests for all the sbi fwft features. It expects the feature is already locked before being called and tests the locked feature.

---
v3:
- Fixed indentation.
- Removed unnecessary comments.
- Added locked prefix.

v2:
- Made changes to handel non boolean feature tests.

riscv/sbi-fwft.c | 50 ++++++++++++++++++++++++++++++++----------------

 1 file changed, 34 insertions(+), 16 deletions(-)
riscv/sbi-fwft.c +0 -0
index 581cbf6b..c4d0b170 100644

riscv/sbi-fwft.c static void fwft_check_reset(uint32_t feature, unsigned long reset) · line 79

Quoted 6 lines
riscv/sbi-fwft.c +3 -0
@@ -74,6 +74,37 @@ static void fwft_check_reset(uint32_t feature, unsigned long reset)
 	sbiret_report(&ret, SBI_SUCCESS, reset, "resets to %lu", reset);
 }
 
+/* Must be called after locking the feature using SBI_FWFT_SET_FLAG_LOCK */
+static void fwft_feature_lock_test_values(uint32_t feature, size_t nr_values,
+	unsigned long test_values[], unsigned long locked_value)

Additional lines of parameters should line up underneath each other, i.e.

static void fwft_feature_lock_test_values(uint32_t feature, size_t nr_values,
unsigned long test_values[], unsigned long locked_value)

I suggest reading other code (there's a function just above this one, fwft_set_and_check_raw(), for example) to get a feel for the coding style.

In this case, I've fixed it up while applying.

Applied to riscv/sbi

https://gitlab.com/jones-drew/kvm-unit-tests/-/commits/riscv/sbi

Thanks,
drew